\section{Grid description}

In the following situations it is necessary to give a description of a horizontal grid:

\begin{itemize}
\item Changing the grid description (operator: \htmlref{setgrid}{setgrid})
\item Horizontal interpolation (operator: \htmlref{interpolate}{interpolate}, \htmlref{remapXXX}{REMAPGRID} and \htmlref{genXXX}{GENWEIGHTS})
\item Generating variables (operator: \htmlref{const}{const}, \htmlref{random}{random})
\end{itemize}

As now described, there are several possibilities to define a horizontal grid.
Predefined grids are available for global regular, gaussian or icosahedral-hexagonal GME grids.


\subsection{Predefined grids}

The following pre-defined grid names are available: 
{\tt r<NX>x<NY>}, {\tt t<RES>grid} and {\tt gme<NI>}

\subsection*{Global regular grid: {\tt r<NX>x<NY>}}
    {\tt r<NX>x<NY>} defines a global regular grid.
    The number of the longitutes {\tt <NX>} and the latitudes {\tt <NY>}
    can be selected at will.
    The longitudes starts at 0$^\circ$ with an increment of (360/{\tt <NX>})$^\circ$.
    The latitudes go from south to north with an increment of (180/{\tt <NY>})$^\circ$.

\subsection*{Global gaussian grid: {\tt t<RES>grid}}
    {\tt t<RES>grid} defines a global gaussian grid.
    Each valid triangular resolution can be used for {\tt <RES>}.
    The longitudes starts at 0$^\circ$ with an increment of (360/nlon)$^\circ$.
    The gaussian latitudes go from north to south.

%\subsection*{Spherical harmonics: t$<$RES$>$spec}
%    t$<$RES$>$spec defines the spectral coefficients of a global gaussian grid.
%    Each valid triangular resolution can be used for $<$RES$>$.

\subsection*{Global icosahedral-hexagonal GME grid: {\tt gme<NI>}}
    {\tt gme<NI>} defines a global icosahedral-hexagonal GME grid.
    {\tt NI} is the number of intervals on a main triangle side.

\subsection{Grids from data files}

You can use the grid description from an other datafile.
The format of the datafile and the grid of the data field must
be supported by this program.
Use the operator '\htmlref{sinfo}{sinfo}' to get short informations about
your variables and the grids.
If there are more then one grid in the datafile the grid description of
the first variable will be used.

\subsection{SCRIP grids}

SCRIP is a Spherical Coordinate Remapping and Interpolation Package.
It is using a common grid description in netCDF.
You can use it to describe curvilinear grids or unstructured grid cells.
For more information about this format see \cite{SCRIP}.
This grid description format is only available if the program was compiled
with netCDF support.

\vspace{2mm}

%\begin{minipage}[t]{\textwidth}
SCRIP grid description example of a curvilinear MPIOM1 GROB3 grid (only the netCDF header):
\begin{lstlisting}[frame=single, backgroundcolor=\color{zebg}, basicstyle=\footnotesize]
    netcdf grob3s {
    dimensions:
            grid_size = 12120 ;
            grid_xsize = 120 ;
            grid_ysize = 101 ;
            grid_corners = 4 ;
            grid_rank = 2 ;
    variables:
            int grid_dims(grid_rank) ;
            float grid_center_lat(grid_ysize, grid_xsize) ;
                    grid_center_lat:units = "degrees" ;
                    grid_center_lat:bounds = "grid_corner_lat" ;
            float grid_center_lon(grid_ysize, grid_xsize) ;
                    grid_center_lon:units = "degrees" ;
                    grid_center_lon:bounds = "grid_corner_lon" ;
            int grid_imask(grid_ysize, grid_xsize) ;
                    grid_imask:units = "unitless" ;
                    grid_imask:coordinates = "grid_center_lon grid_center_lat" ;
            float grid_corner_lat(grid_ysize, grid_xsize, grid_corners) ;
                    grid_corner_lat:units = "degrees" ;
            float grid_corner_lon(grid_ysize, grid_xsize, grid_corners) ;
                    grid_corner_lon:units = "degrees" ;

    // global attributes:
                    :title = "grob3s" ;
    }
\end{lstlisting}
%\end{minipage}

\subsection{PINGO grids}

PINGO uses a very simple grid description in ASCII format
to describe regular longitude/latitude or global gaussian grids.
All PINGO grid description files are supported by {\CDO}. 
For more information about this format see \cite{PINGO}.

\vspace{2mm}

%\begin{minipage}[t]{\textwidth}
PINGO grid description example of a T21 gaussian grid:
\begin{lstlisting}[frame=single, backgroundcolor=\color{zebg}, basicstyle=\footnotesize]
    Grid Description File
    (Comments start at non digit characters and end at end of line)
    First part: The dimensions.
    64 32 = Number of longitudes and latitudes
    Second part: The listed longitudes.
    2 means equidistant longitudes
    0.000000 5.625000 = Most western and second most western longitude
    Third part: The listed latitudes.
    32 means all 32 latitudes are given in the following list:
     85.761  80.269  74.745  69.213  63.679  58.143  52.607  47.070
     41.532  35.995  30.458  24.920  19.382  13.844   8.307   2.769
     -2.769  -8.307 -13.844 -19.382 -24.920 -30.458 -35.995 -41.532
    -47.070 -52.607 -58.143 -63.679 -69.213 -74.745 -80.269 -85.761
\end{lstlisting}
%\end{minipage}

\subsection{CDO grids}

All supported grids can be also described with the {\CDO} description ASCII formatted file.
%The {\CDO} grid description is an ASCII formatted file.
%It is a common grid description for all available grids.
The following keywords can be used to describe a grid:

\vspace{3mm}
\begin{tabular}[b]{lll}
gridtype     & STRING       & type of the grid (gaussian, lonlat, curvilinear, cell) \\
gridsize     & INTEGER      & size of the grid \\
xsize        & INTEGER      & size in x direction (number of longitudes) \\
ysize        & INTEGER      & size in y direction (number of latitudes) \\
xvals        & FLOAT ARRAY  & x values of the grid \\
yvals        & FLOAT ARRAY  & y values of the grid \\
xnpole       & FLOAT        & x value of the north pole (rotated grid) \\
ynpole       & FLOAT        & y value of the north pole (rotated grid) \\
nvertex      & INTEGER      & number of the vertices for all grid cells \\
xbounds      & FLOAT ARRAY  & x bounds of each gridbox \\
ybounds      & FLOAT ARRAY  & y bounds of each gridbox \\
%xname        & STRING       & name of the x axis \\
%xlongname    & STRING       & longname of the x axis \\
%xunits       & STRING       & units of the x axis \\
%yname        & STRING       & name of the y axis \\
%ylongname    & STRING       & longname of the y axis \\
%yunits       & STRING       & units of the y axis \\
xfirst, xinc & FLOAT, FLOAT & macros to define xvals with a constant increment \\
yfirst, yinc & FLOAT, FLOAT & macros to define yvals with a constant increment \\
\end{tabular}

\vspace{4mm}

Which keywords are necessary depends on the gridtype.
The following table gives an overview of the default values or the array size for the different
grid types.

%\vspace{2mm}
%\begin{tabular}[b]{|c|c|c|c|c|c|c|c|c|}
%\hline
%gridtype    & gridsize     & xsize & ysize & xvals    & yvals    & nvertex & xbounds     & ybounds \\
%\hline
%\hline
%gaussian    & xsize*ysize  & nlon  & nlat  & xsize    & ysize    & 2       & 2*xsize     & 2*ysize \\
%\hline
%lonlat      & xsize*ysize  & nlon  & nlat  & xsize    & ysize    & 2       & 2*xsize     & 2*ysize \\
%\hline 
%curvilinear & xsize*ysize  & nlon  & nlat  & gridsize & gridsize & 4       & 4*gridsize  & 4*gridsize \\
%\hline
%cell        & ncell        &       &       & gridsize & gridsize & nv      & nv*gridsize & nv*gridsize \\
%\hline
%\end{tabular}
%\vspace{2mm}

\vspace{2mm}
\hspace{2cm}
\begin{tabular}[c]{|l||c|c|c|c|}
\hline
gridtype   & lonlat      & gaussian    & curvilinear & cell \\
\hline
\hline
gridsize   & xsize*ysize & xsize*ysize & xsize*ysize & {\bf ncell} \\
\hline
xsize      & {\bf nlon} & {\bf nlon} & {\bf nlon} & gridsize \\
\hline
ysize      & {\bf nlat} & {\bf nlat} & {\bf nlat} & gridsize \\
\hline
xvals      & xsize & xsize & gridsize & gridsize \\
\hline
yvals      & ysize & ysize & gridsize & gridsize \\
\hline
xnpole     & 0     &       &          &          \\
\hline
ynpole     & 90    &       &          &          \\
\hline
nvertex    & 2 & 2 & 4 & {\bf nv} \\
\hline
xbounds    & 2*xsize & 2*xsize & 4*gridsize & nv*gridsize \\
\hline
ybounds    & 2*ysize & 2*ysize & 4*gridsize & nv*gridsize \\
\hline
%xname      &  &  &  &  \\
%\hline
%xlongname  &  &  &  &  \\
%\hline
%xunits     &  &  &  &  \\
%\hline
%yname      &  &  &  &  \\
%\hline
%ylongname  &  &  &  &  \\
%\hline
%yunits     &  &  &  &  \\
%\hline
\end{tabular}

\vspace{3mm}

The keywords nvertex, xbounds and ybounds are optional if the area weights are not needed.

\vspace{2mm}

%\begin{minipage}[t]{\textwidth}
{\CDO} grid description example of a T21 gaussian grid:
\begin{lstlisting}[frame=single, backgroundcolor=\color{zebg}, basicstyle=\footnotesize]
    gridtype = gaussian
    xsize    = 64
    ysize    = 32
    xfirst   =  0
    xinc     = 5.625
    yvals    = 85.76  80.27  74.75  69.21  63.68  58.14  52.61  47.07
               41.53  36.00  30.46  24.92  19.38  13.84   8.31   2.77
               -2.77  -8.31 -13.84 -19.38 -24.92 -30.46 -36.00 -41.53
              -47.07 -52.61 -58.14 -63.68 -69.21 -74.75 -80.27 -85.76
\end{lstlisting}
%\end{minipage}

\vspace{2mm}

%\begin{minipage}[t]{\textwidth}
{\CDO} grid description example of a global regular grid with 60x30 points:
\begin{lstlisting}[frame=single, backgroundcolor=\color{zebg}, basicstyle=\footnotesize]
    gridtype = lonlat
    xsize    =   60
    ysize    =   30
    xfirst   = -177
    xinc     =    6
    yfirst   =  -87
    yinc     =    6
\end{lstlisting}
%\end{minipage}

\vspace{2mm}

For a lon/lat grid with an rotated pole, the north pole must be defined.
As far as you define the keywords xnpole/ynpole all coordinate values
are for the rotated system.

\vspace{2mm}

%\begin{minipage}[t]{\textwidth}
{\CDO} grid description example of a regional rotated lon/lat grid:
\begin{lstlisting}[frame=single, backgroundcolor=\color{zebg}, basicstyle=\footnotesize]
    gridtype = lonlat
    xsize    = 81
    ysize    = 91
    xfirst   =  -19.5
    xinc     =    0.5
    yfirst   =  -25.0
    yinc     =    0.5
    xnpole   = -170
    ynpole   =   32.5
\end{lstlisting}
%\end{minipage}

Example {\CDO} descriptions of a curvilinear and an unstructured grid can be found
in \htmlref{Appendix B}{appendixgrid}.

%#define  GRID_GENERIC             1
%#define  GRID_GAUSSIAN            2
%#define  GRID_GAUSSIAN_REDUCED    3
%#define  GRID_LONLAT              4
%#define  GRID_SPECTRAL            5
%#define  GRID_FOURIER             6
%#define  GRID_TRIANGULAR          7
%#define  GRID_TRAJECTORY          8
%#define  GRID_CELL                9
%#define  GRID_CURVILINEAR        10

%gaussian   curv cell
%regular    curv cell
%triangular      cell

%regular (regelmaessig)
%square (quadratisches) grid is a grid formed by tiling the plane regularly with squares
%A triangular grid, also called an isometric grid (Gardner 1986, pp. 209-210), is a grid fo
%rmed by tiling the plane regularly with equilateral triangles. 

%quadrilateral (vierseitige)

%rectangular (rechteckig)
%  gaussian
%  regular lon/lat

%nonrectangular

%  triangular
%  hexagonal (GME)
%  curvilinear (krummlinig)
%  generic

% retilinear (geradlinig)

