2009-??-?? Uwe Schulzweida * using CDI library version 1.3.2 * added option -Q to sort netCDF variable names * splitsel: change the number of output digits from 3 to 6 * settaxis: bug fix for increment 'months' [report: Ute Merkel] * remaplib: change loop counter from int to long * remaplaf: fixed buffer overflow * remapcon: change max_subseg from 1000 to 100000 * Remapeta: correct humidity up to highest level *nctop* where condensation is allowed * Version 1.3.2 released 2009-04-16 Uwe Schulzweida * using CDI library version 1.3.1 * set default calendar to proleptic gregorian * New operator (experimental): select with parameter code, level, param * added support for proleptic gregorian calendar * added support for missval = NaN * added support for GRID type Lambert Conformal Conic * import_cmsaf: read parameter for Lambert Azimuthal Equal Area projection * import_cmsaf: read parameter for Cylindrical Equal Area projection * import_cmsaf: bug fix for datasets with gain/offset and more than 1 timestep * Sinusoidal and Lambert Azimuthal Equal Area grids with units [km] * cdoInitialize: omp_set_num_threads have to be called for every module * expr: add ';' at the end of input expression if missing * added predefined lonlat grid for germany, europe and africa * gridFromName: define GRID with one point lon=_lat= * sellonlatbox: select box from circular curvilinear grids * CDO_PCTL_NBINS: change default number of bins from 100 to 101 * change max parameter from 256 to 4096 (bug fix) [report: Nils Fischer] * intlevel: use zaxis attributes from input [report: Carmen Ulmen] * ml2pl: added support for Geopotential Height [request: Katharina Klehmet] * remapbil, remapbic: enable extrapolation with REMAP_EXTRAPOLATE=ON * remapdis, remapnn: disable extrapolation with REMAP_EXTRAPOLATE=OFF * remapcon: eliminate srch_mask (~40% speed up) * remapcon: change bound_box to int type (~25% speed up) * remapcon: optimization of inner loop (~7% speed up) * remaplaf: bug fix for fields with missing values * remapnn: bug fix for distance equal zero * genYbounds: bug fix for non global fields * mermean: bug fix for weights from 'zonmean' (report: Michael Sigmond) * replaced strncpy/strncmp by memcpy/memcmp * remap: read grid corners only if needed * Version 1.3.1 released 2009-04-15 Pier Giuseppe Fogli * chlevel: fixed bug that happens when the list of oldlev,newlev contains the same level more than once 2009-01-16 Álvaro M. Valdebenito * Settime: added "seconds" support to "settunits", "settaxis" and "shifttime" 2009-01-15 Uwe Schulzweida * using CDI library version 1.3.0 * New operator: remapcon2 - Second order conservative remapping * New operator: remaplaf - Largest area fraction remapping * New operator: remapnn - Nearest neighbor remapping * New operator: reci - Reciprocal value * added support for GRID type Sinusoidal * added support for GRID type Lambert Azimuthal Equal Area * import_cmsaf: added support for monthly mean diurnal cycle * remap: use gridIsCyclic to check whether lon is cyclic (bug fix) * remap: check grid and weights * remap: set num_srch_bins to nlat/2 (speedup) * sinfo: extent grid description * diff: check variable names * sellonlatbox: bug fix for curvilinear grids * setzaxis: change float to double (bug fix) [report: Pier Giuseppe Fogli] * Arith: added filltype FILL_RECTS [request: Wolfgang Mueller] * inputsrv: use -f format if set (bug fix) * Seasstat: warning message for seasons with less than 3 input time steps * merge: bug fix for usage in pipes [report: Álvaro M. Valdebenito] * remapcon: change max_subseg from 100000 to 1000 * remapbil: 2. bug fix for cross_product eq zero * gridWeights: bug fix for areas greater than hemisphere [report: Malte Heinemann] * gridverify: replaced [Cedrick Ansorge] * intlevel: bug fix for datasets with missing values * yseasstd,yseasvar: wrong array index (bug fix) [report: Robert Nicholas] * Version 1.3.0 released 2008-11-13 Uwe Schulzweida * using CDI library version 1.2.1 * New operator: import_cmsaf - import CM-SAF files * New operator: gengrid - generate grid [request: Michael Boettinger] * New operator: pow - Power [request: Gil Lizcano] * New operator: tpnhalo (testversion) * Module Timstat: use taxis with bounds from input [request: Beate Geyer] * sellonlatbox: added support for grid units 'radians' [request: Jeff Daily] * sellonlatbox: added support for GRID_CELL [request: Jeff Daily] * Added option '-u' to determinate whether to overwrite existing files [request: David Wang] * copy, cat: concatenate time constant fields * copy, cat: compare input files * zonvar: activation missing (bug fix) [report: Irene Fischer-Bruns] * detrend: change taxisCreate to taxisDuplicate [report: Ute Merkel] * remapdis: added support for GRID_CELL without bounds (full grid search) * remapbil: bug fix for cross_product eq zero * sethalo: bug fix for x/y bounds [report: Helmut Haak] * ifthen: bug fix for datasets with different missing values [report: Beate Geyer] * runmean: bug fix for datasets with missing values [report: Carmen Ulmen] * namelist: bug fix for wrong input * Version 1.2.1 released 2008-08-13 Uwe Schulzweida * using CDI library version 1.2.0 * added support for netCDF4 classic with deflate option (option -z zip) * Arith: added filltype FILL_FILE [request: Rita Seiffert] * New operator: intlevel - Linear level interpolation * New operator: invertlev - Invert levels [request: Marco Giorgetta] * New operator: sellevidx - Select levels by index [request: David Wang] * New module: Pressure (fpressure, hpressure) [request: Jan Kazir] * New module: Tests (normal, studentt, chisquare, beta, fisher) * New module: Echam5ini (read_e5ml, write_e5ml) * New operator: import_amsr to read AMSR binary files * New operator: vertwind (testversion) [request: Michael Boettinger] * New operator: ml2pl_lp (testversion) [request: Hui Wan] * remapdis: check that distance is inside the range of -1 to 1 [report: Hui Wan] * remapeta: added missing value support * vlistCompare: compare all lon/lat values * setpartab: added parameter LTYPE [request: Stefan Petri] * Settime: change TIME_CONSTANT to TIME_VARIABLE if ntstep = 0 * added support of CM-SAF HDF5 grids (test version) * DBL_IS_EQUAL: check NaN with isnan (removed! compilation problems) * yseasmean: bug fix for datasets with missing values [report: Hans-Jürgen Panitz] * yhourmean: bug fix for datasets with missing values * ydaymean: bug fix for datasets with missing values * namelist: bug fix for wrong input * ntime: bug fix for datasets with time constant parameter only [report: David Wang] (also affected: ndate, nmon, nyear, showdate, showtime, showmon, showyear) * Version 1.2.0 released 2008-04-08 Uwe Schulzweida * using CDI library version 1.1.1 * configure: --with-szlib= * configure: check stat.st_blksize * New operator: regres (Regression) [request: Wolfgang Mueller] * New module: Gridcell (gridarea, gridweights) * New operator: del29feb to delete the 29. February [request: Etienne Tourigny] * New operator: zaxisdes * Exprf: using MT safe version of bison and flex (bug fix) [report: Claas Teichmann] * Arith: using missval from vlistID1 if ( filltype == FILL_TS && vlistIDx1 != vlistID1 ) * Arithc: recalculate number of missing values (bug fix) [report: Holger Goettel] * Vertint: support for data on hybrid half-level * Vertint: support for GME data [request: Luis Kornblueh] * Vertint: bug fix for input with time constant fields * Outputgmt: use grid_mask if present * Input: skip ',' from standard input stream * splitsel: bug fix for multilevel/multivar datasets [report: Heiner Widmann] * remaplib: set luse_grid_corners = TRUE for GRID_CELL (bug fix) * remap_conserv: skip very small regions if num_subseg exceeded limit * remapcon: bug fix for NORMALIZE_OPT 'dest' and 'none' * Seltime: changed value of NOPERATORS (bug fix) * Version 1.1.1 released 2008-01-24 Uwe Schulzweida * using CDI library version 1.1.0 * New module: Monarith (monadd, monsub, monmul, mondiv) [request: Daniel Hernandez] * Add support for Lambert grids in GRIB files * Seltime: bug fix for input with time constant fields [report: Claas Teichmann] * Setlevel: bug fix for usage in pipes [report: Claas Teichmann] * Outputbounds: use -ZNaN for missing values [request: Karin Meier-Fleischer] * Outputbounds: add zonal mean [request: Malte Heinemann] * Remap: check for non global grids * Setgatts: improve attribute format * diff: check number of time steps * Timstat: change datetime type from INT64 to char[16] * gridWeights: warning with code number when using constant area weights * Version 1.1.0 released 2007-10-29 Uwe Schulzweida * cat: bug fix for large existing output files (>2GB) on 32-bit machines [report: Heinz-Dieter Hollweg] * gradsdes: bug fix for monthly mean data with start day > 28 [report: Renate Brokopf] * expr: change exponent precedence from left to right (bug fix)[report: Claas Teichmann] * Version 1.0.9.1 released 2007-10-22 Uwe Schulzweida * using CDI library version 1.0.8 * New module: yhourstat (yhour -min/-max/-sum/-mean/-avg/-std/-var) [request: Holger Goettel] * New operator: mrotuv [request: Uwe Mikolajewicz] * New operator: varquot2test and meandiff2test [request: Irene Fischer-Bruns] * ymonstat: write original order of timesteps [report: Ileana Bladé] * gradsdes: add GRIB level type to VARS [report: Ben-Jei Tsuang] * sellonlatbox: support for curvilinear grids [request: Hannes Isaak Reuter] * bug fix for cdo option -f format [report: Stephan Lorenz] * runstat: add env RUNSTAT_DATE to set output date [request: Claudia Wunram] * ifthen: bug fix for masks that varies not with time [report: David Wang] * mrotuvb: calculate coordinates from u and v * eca_cdd/eca_cwd: bug fix for name2 [report: James Hoffmann] * cdotest: bug fix in eca_gsl/module.c -> 2 input streams [report: Harald Anlauf] * use always decode_date and encode_date to decode/encode date * splitname: bug fix [report: Daniel Klocke] * remapcon: bug fix reset BABY_STEP to 0.001 [report: Claas Teichmann] * merge: bug fix for all files with constant fields only [report: Jan Keller] * Version 1.0.9 released 2007-07-04 Ralf Quast * Timcount and Seascount: bug fix for missing values 2007-06-27 Uwe Schulzweida * using CDI library version 1.0.7 * New operator: remapeta * New operator: tinfo * Renamed chvar, selvar, delvar, showvar, setvar and splitvar to chname, selname, delname, showname, setname and splitname * Renamed nvar to npar and vardes to pardes * Renamed selpctl to timselpctl * Selstat: renamed to Timselstat * Vertint: add support for LM VCT [request: Tanja Stanelle] * Input: bug fix for missing values [report: Thomas Bruns] * Merge: bug fix for files with constant fields only [report: Christian Rodehacke] * expr.ex: bug fix for mixed time constant and variable fields * Ymonstat: bug fix for missing values [report: Ivonne Anders] * remapdis: bug fix if distance is zero * remapcon: bug fix in intersection (s1 >= ZERO) [report: Joerg Wegner] * remapcon: speed up by increasing BABY_STEP from 0.001 to 0.01 * interpolate: bug fix for north/south bounds > 90 or < -90 [report: Stefan Hagemann] * gradsdes: bug fix for GRIB files with absolute path [report: Matthias Büchner] * replace ztype2ltype by zaxis2ltype * ltype2ztype: set default zaxis type to ZAXIS_GENERIC * selltype, setltype, chltype: extent to all ltypes [request: Patrick Samuelsson] * Version 1.0.8 released 2007-06-26 Etienne Tourigny * Add new operator: splitsel * Add new operator: histfreq * Add new operator: setrtoc and setrtoc2 * list.c: changes to accept inf and -inf as arguments 2007-06-07 Cedrick Ansorge * New operator: smooth9 2007-05-30 Ralf Quast * New operator: timcount, hourcount, daycount, moncount, yearcount, seascount * Renamed eca_fdns, eca_strwin, eca_strbre, eca_strgal, eca_hurr to fdns, strwin, strbre, strgal, hurr 2007-04-18 Cedrick Ansorge * New operator: maskregion 2007-03-08 Uwe Schulzweida * using CDI library version 1.0.6 * Add docu for dv2uvl and uv2dvl * New operator: read_e5ini (test version) * taxisCopyTimestep: bug fix [report: Harald Anlauf] * sinfo: print ltype for GRIB records on GENERIC zaxis * seldate: bug fix [report: Michael Hofstätter] * fldmax: bug fix if all values < 0 and missvals [report: Karin Meier-Fleischer] * vlistCompare: check grid orientation for func_sft * gradsdes: set time increment to "mo" for monthly means * gradsdes: process only the first 2GB of a GRIB file * Version 1.0.7 released 2007-01-02 Ralf Quast * rename tchill to wct * split eca_strwind into eca_strwin, eca_strbre, eca_strgal and eca_hurr 2006-12-14 Uwe Schulzweida * using CDI library version 1.0.5 * New operator: vertvar, timvar, yearvar, monvar, dayvar, hourvar * New operator: runvar, seasvar, selvar, ydayvar, ydrunvar, ymonvar, yseasvar * New operator: dv2uvl, uv2dvl [request: Luis Kornblueh] * New operator: selsmon [request: Claudia Wunram] * eca: Titles update * remap: set norm_opt after read_remap_scrip (bug fix) [report: Andreas Sterl] * cdo: FP_FAST_FMA bug fix [report: Sunpoet] * ecacore: update [Ralf Quast] * Version 1.0.6 released 2006-11-30 Uwe Schulzweida * using CDI library version 1.0.4 * New operator: showformat (Showinfo) [request: Helmuth Haak] * remap: initialize links.option (bug fix) [report: Luis Kornblueh] * update date/time conversion from udunits (bug fix) [report: Oliver Krueger] * rotuvb: change coordinates to geographic (bug fix) [report: Klaus Wyser] * Wind.c: define name, longname and units [report: Chiara Cagnazzo] * add env CDO_DISABLE_HISTORY [request: Bjørge Solli] * add env CDO_DISABLE_FILESUFFIX [request: Heiner Widmann] * add suffix .sz for SZIP compressed files [request: Monika Esch] * input: bug fix * pstreamFindID: check pstreamptr->name before use (bug fix) * operatorInqModID: speed up * Version 1.0.5 released 2006-11-17 Ralf Quast * New module: Tchill (tchill) * New module: Hi (hi) * New module: ECA Indices of Daily Temperature and Precipitation Extremes (eca_cfd, eca_csu, eca_cwdi, eca_cwfi, eca_etr, eca_fd, eca_gsl, eca_hd, eca_hwdi, eca_hwfi, eca_id, eca_su, eca_tg10p, eca_tg90p, eca_tn10p, eca_tn90p, eca_tr, eca_tx10p, eca_tx90p, eca_cdd, eca_cwd, eca_r10mm, eca_r20mm, eca_r75p, eca_r75ptot, eca_r90p, eca_r90ptot, eca_r95p, eca_r95ptot, eca_r99p, eca_r99ptot, eca_rr1, eca_sdii, eca_fdns, eca_strwind) 2006-11-06 Uwe Schulzweida * processSelf: lock/unlock NumProcess (bug fix) * pstreamOpenRead: move mutex_unlock after cdoInqHistory * Version 1.0.4 released 2006-11-06 Ralf Quast * New module: Ydrunstat (ydrun -min, -max, -sum, -mean, -avg, -std, -var) * New module: Timpctl (tim-, hour-, day-, mon-, year- pctl) * New module: Selpctl (selpctl) * New module: Runpctl (runpctl) * New module: Seaspctl (seaspctl) * New module: Ydaypctl (ydaypctl) * New module: Ymonpctl (ymonpctl) * New module: Yseaspctl (yseaspctl) * New module: Ydrunpctl (ydrunpctl) * New operator: enspctl (Ensstat) * New operator: fldpctl (Fldstat) * New operator: zonpctl (Zonstat) * New operator: merpctl (Merstat) 2006-11-02 Uwe Schulzweida * using CDI library version 1.0.3 * New operator: intntime [request: Michael Boettinger] * New operator: mrotuvb [request: Helmuth Haak] * New operator: outputvector [request: Helmuth Haak] * selyear: bug fix for years > 9999 [report: Uwe Mikolajewicz] * inttime: extention for months and years [request: Holger Goettel] * outputcenter: support of zonal and meridional fields * zonavg: bug fix for non gaussian or non lonlat grids * remaplib.sort_add: don't sort if num_links <= 1 * remaplib.remap_bi?: check that src_add is valid * Remap: use REMAP_NON_GLOBAL only for gridsize > 1 * Version 1.0.3 released 2006-09-18 Uwe Schulzweida * using CDI library version 1.0.2 * set alias gradsdes to gradsdes2 * rename gradsdes to gradsdes1 * New operator: int and nint (Math) [request: Joerg Wegner] * New operator: ydaysum, ymonsum, yseassum [request: Hannes Reuter] * add option -e exp to test DRMAA * add option -z szip to compress GRIB records with SZIP * use DBL_IS_EQUAL to compare floating point * remapbil, remapbic: improvement and speedup for regional lonlat grids * Seltime: print warning message if parameter not found * pstreamDefVlist: unpack netCDF data if datatype = FLT64 * Version 1.0.2 released 2006-08-01 Uwe Schulzweida * using CDI library version 1.0.1 * add option -b to set the number of bits for the output precision * support of 1 to 32 bit GRIB data * set MIN_STACK_SIZE to 64MB * seldate: use parameter - for min and max val * seldate: change date format to YYYY-MM-DDThh:mm [request: Martina Stockhaus] * New operator: selstdname, showstdname [request: Martina Stockhaus] * New operator: setrcaname, seloperator for RCA GRIB datasets [Frida Brantvall] * New operator: selltype, setltype, chltype, showltype [together with Frida Brantvall] * New operator: setpartabv * add new parameter table format * fix problems on cygwin [report: Mark Hadfield] * merge: move vlistDestroy after streamClose [report: Matthias Cuntz] * gradsdes: fix bug for only one record without time [report: Angelika Heil] * gradsdes: fix problem for variable names with - character * namelist update * New module: Setbox [Etienne Tourigny] * history format changed to nco [Etienne Tourigny] * process: set MAX_ARGS from 1024 to 8192 * Version 1.0.1 released 2006-06-15 Uwe Schulzweida * using CDI library version 1.0.0 * New operator: dv2ps (Wind) [request: Luis Kornblueh] * New module: Arithlat (mulcoslat, divcoslat) <- docu missing * setreftime: use taxisDuplicate to copy bounds [report: Ivonne Anders] * Seasstat: bug fix for datasets with only 1 season [report: Simon Blessing] * Vertint: remove special treatment for geopoth * configure: check compiler version * Version 1.0.0 released 2006-05-04 Uwe Schulzweida * using CDI library version 0.9.7 * New module: Mergetime [request: Stefanie Legutke] * New operator: atan2 (Arith) [request: Tom Hardy] * New operator: abs (Math) [request: Reiner Schnur] * New module: Enlargegrid [request: Tom Hardy] <- docu missing * New module: Input (input inputext inputsrv) * Invert: fix memory release problem [report: Tom Hardy] * setzaxis: set MAX_LINE_LEN from 1024 to 65536 [bug report: Martine Michou] * enlarge: update for zonal and meridional data [request: Wolfgang Mueller] * gradsdes: bug fix for unsorted GRIB data [report: Stefan Bauer] * splitzaxis: generate file name from zaxisID+1 [bug report: Martina Stockhaus] * splitgrid: generate file name from gridID+1 * Vardup: bug fix for missing values * Timsort: bug fix for time constant fields * Mastrfu: set units to [kg/s] [report: Rita Seiffert] * Merstat: call gridWeights only if needed * Vertint: use args2fltlist to read parameter list * Splitrec: change record number from 5 to 6 digits * Math: rename log to ln * Change help info format * Selbox, Maskbox, Mergegrid, Zonstat, Merstat: check number of different grids * extent macro UNCHANGED_RECORD to cdoDefaultDataType and cdoDefaultByteorder * pipeDefRecord, pstreamClose bug fix for seltimestep in pipes * remove module docu from source code * rename default grid name "ni" to "gme" * rename operator intgrid to intgridbil * add option -s for silent mode [request: Martina Stockhaus] * Version 0.9.13 released 2006-03-08 Uwe Schulzweida * using CDI library version 0.9.6 * New module: Wind (uv2dv, dv2uv) <- docu missing * New module: Histogram (histcount, histsum, histmean) <- docu missing * New operator: sinfop (Sinfo) * Intgrid: missing value support for intgrid * Cat: the output file must not exist anymore * Zonstat: add support for GRID_GENERIC if ny > 1 * read_remap_scrip: if GME grid, read GME mask (bug report Luis) * remaplib: change read/write of grid corners (bug fix) * Spectral: rename sp2gp2/gp2sp2 to sp2gpl/gp2spl * namelist: update * Version 0.9.12 released 2006-02-01 Uwe Schulzweida * using CDI library version 0.9.5 * use macro DBL_IS_EQUAL to check floating-point equality * use taxisCopyTimestep if posible * New operator: sp2gp2 (Spectral) for ERA40 data * New operator: gp2sp2 (Spectral) for ERA40 data * New operator: replace (Replace) * New operator: specinfo to print info for spectral transformation * New module: Selstat (selmin, selmax, selsum, selmean, selavg, selstd) * New module: Mergegrid (mergegrid) <- docu missing * Runstat: adjust date and time * Merge: duplicate taxis (bug fix) * Vertint: abort for different grids (bug fix) * Gradsdes: set XYHEADER to 644 (bug report: Holger) * Remap: add GME grid support * Remap: use environment variable NORMLIZE_OPT (bug fix) * Cat: set tsID2 to 1 for input files with constant data only * zaxis: add vct support for hybrid levels * remaplib: change max_subseg from 10000 to 100000 * Selrec: add IEG support * Version 0.9.11 released 2005-12-14 Uwe Schulzweida * using CDI library version 0.9.4 * IEG support * New operator: ifthenelse (Cond2) * Timer: option -T * Gradsdes: IEG 32 support * Selbox: add rotated grids * Diff: change date and time format to ISO * Gradsdes: bug fix for lonlat grids from N->S (report: Thibaut Gridel) * Inttime: abort if units is not minutes, hours or days (bug fix) * Settime: add all available calendars * Inttime: add all available calendars * fourier: made ifax and trig local (bug fix) * Version 0.9.10 released 2005-10-18 Uwe Schulzweida * using CDI library version 0.9.2 * remapcon: replace gridbox_area after remapping * intgrid: init array2 with zero * Timsort: OpenMP version * gradsdes: bug fix for ZDEF * pstream: mt safe * New operator: gradsdes2 (Gradsdes) * New module: Ensstat (ensmin ensmax enssum ensmean ensavg ensstd ensvar) * New operator: remap (Remap) * New operator: gencon (Remap) * New operator: outputf (Output) * New operator: enlarge (Enlarge) * Arith: support of constant species * zaxis: add bounds * Version 0.9.9 released 2005-07-17 Uwe Schulzweida * using CDI library version 0.9.1 * Arith: - filling up 1. record or timestep of 1. or 2. stream if needed * New operator: setlevel (Set) * New operator: chlevel, chlevelv, chlevelc (Change) * Inttime: change date and time format to ISO * Cond: bug fix (change taxisID1 to taxisID2) * Condc: bug fix (else if statemants) * Compc: bug fix (else if statemants) * Copy: bug fix (taxisID2) * gridWeights: bug fix for non global gaussian grids * replace args2intarr by args2intlist * replace args2fltarr by args2fltlist * Speedup remap and remapcon on NEC sx6 * Speedup spectral transformation (replace phcs by jspleg1) * Version 0.9.8 released 2005-05-26 Uwe Schulzweida * using CDI library version 0.9.0 * Speedup Remap with masks by saving MAX_REMAPS maps * Speedup remapcon - remap_conserv (change malloc to realloc) - store_link_cnsrv (change search loop) * Setmiss: setctomiss with NaN * Info, Sinfo, Showinfo, Settime, Seltime: change date and time format to ISO * New module: Maskbox (masklonlatbox, maskindexbox) * New module: Arithdays (muldpm, divdpm, muldpy, divdpy) * New operator: setcalendar (Settime) * New operator: setgridarea (Setgrid) * New operator: seltabnum (Select) * Cond: bug fix (filling up the first file) * setmissval: bug fix * farstd, farcstd: bug fix (for missing values) * gridWeights: calculate area weights for LONLAT grids * rename Expr.c to Exprf.c * change function cdoOperatorID * field.h: bug fix for MUL with 0 * bug fix in all Modules (define timestep) * Version 0.9.7 released 2005-04-03 Uwe Schulzweida * using CDI library version 0.8.9 * support for rotated grids * New module: Detrend (detrend) * New module: Trend (trend) * New module: Subtrend (subtrend) * New module: Timsort (timsort) * New module: Ydaystat (ydaymin, ydaymax, ydaymean, ydayavg, ydaystd) * New module: Ymonarith (ymonadd, ymonsub, ymonmul, ymondiv) * rename Lm* to Ymon* and Ls* to Yseas* * Splityear: change filename for doubled years * Version 0.9.6 released 2005-02-17 Uwe Schulzweida * using CDI library version 0.8.8 * bug fix for taxis with remap, copy, setgrid * New operator: shifttime (shift time steps) * changing all integer level to floating point * Vertint: check range of surface pressure * Sinfo: print data type and file type * Invert: extended for curivilinear grids * pstream: add function pstreamInqFiletype * Reduced grids: read/write record if -R is used * Version 0.9.5 released 2005-01-03 Uwe Schulzweida * using CDI library version 0.8.7 * New operator: setmissval (set the missing value) * New operator: setpartab (set the parameter table) * Docu for operator infov, sinfov and diffv * Version 0.9.4 released 2004-12-17 Uwe Schulzweida * changes for CDI library version 0.8.6 * New operator: gradsdes for GRIB, SERVICE and EXTRA files * Setmiss: float (4 Byte reals) support * Invert: bug fix * Selbox: buf fix (add gridDefNvertex) * grid.c: using grids from other datafile * grid.c: generate grid from PINGO file * fourier.c: multi threaded version of fft_set * configure: checks for pthread and malloc library * Version 0.9.3 released 2004-11-17 Uwe Schulzweida * changes for CDI library version 0.8.5 * New module: Seasstat (seasmin, seasmax, seassum, seasmean, seasavg, seasstd) * New module: Lsstat (lsmean, lsavg, lsmin, lsmax, lsstd) * New operator: Selseas * New operator: Splitseas * Seldate: change parameter to start date and optional end date * readline: add parameter max length * grid.c: generate grid from CDI file * remapcon: Bug fix for NORMALIZE_OPT and missing values * pthread_create: check return value * Version 0.9.2 released 2004-10-14 Uwe Schulzweida * changes for CDI library version 0.8.4 * use compNlon to compute nlon from nlat * pipeInqTimestep: Bug fix for Timstat in pipes * Select: Print message if isel not found * Timstat: add missing value support * Runstat: add missing value support * Lmstat: add missing value support * Inttime: add missing value support * Intyear: add missing value support * Vertstat: add missing value support * new operator: timmean, yearmean, monmean, daymean, hourmean * new operator: runmean * new operator: lmmean * new operator: vertmean * new operator: map (source code from PINGO) * new operator: setreftime * new operator: selrec * new operator: splityear * netCDF2 support * Version 0.9.1 released 2004-09-08 Uwe Schulzweida * changes for CDI library version 0.8.3 * new module: Vertint (ml2pl, ml2hl) * new module: Outputgmt (outputcenter, outputbounds) * new operator: settaxis, settunits * Arith, Cond, Comp: input stream2 can only have 1 record or 1 timestep * Inttime: set ntsteps to 1 if ijulinc = 0 * Timstat: set ntsteps to 1 for tim* * seltimestep: set ntsteps to 1 if nsel = 1 * replace all streamCopyRecord by streamReadRecord and streamWriteRecord for piping * Version 0.9.0 released 2004-07-09 Uwe Schulzweida * changes for CDI library version 0.8.2 * new module: Remap (remapcon, remapbil, remapbic, remapdis) * new module: Setgatt (setgatt, setgatts) * new module: Sort (sortcode, sortvar, sortlevel) * new module: Writegrid * new module: Vertstat (vertmin, vertmax, vertsum, vertavg, vertstd) * new operator: delcode, delvar * Timstat, Lmstat: use absolute timeaxis for output * bug fix for use alias names in pipeline * sellonlatbox: bug fix for selection out of bounds * new option -v: Print extra details for some operators * new option -R: Convert reduced to regular grid * Version 0.8.9 released 2004-05-21 Uwe Schulzweida * changes for CDI library version 0.8.1 * Timstat, Runstat, Lmstat: extended for variables with TIME_CONSTANT * pipeDefTimestep: compute nrecs for TIME_VARIABLE * Splittime: bug fix for splithour and splitmon * new operator: chvar, setvar * new module: Intyear * Version 0.8.8 released 2004-04-19 Uwe Schulzweida * changes for CDI library version 0.8.0 * Arith: new operator (min and max) * Arith: extended for missing values * Arithc: extended for missing values * Selindexbox: extended for curivilinear grids * new module: Fillmiss * new module: Varrms * new module: Fldrms * new module: Setgridtype * bug fix: setmisstoc * bug fix: Change, Set, Settime - change copy to read/write * Version 0.8.7 released 2004-03-14 Uwe Schulzweida * changes for CDI library version 0.7.9 * change format for online help information * new module: Change (chcode) * new module: Set (setcode) * new module: Settime (setdate, settime, setyear, setmon, setday) * new module: Runstat (runmin, runmax, runsum, runavg, runstd) * new module: Merstat (mermin, mermax, mersum, meravg, mermean, mervar, merstd) * new module: Zonstat (zonmin, zonmax, zonsum, zonavg, zonmean, zonvar, zonstd) * new module: Fldstat (fldmin, fldmax, fldsum, fldavg, fldmean, fldvar, fldstd) * new module: Cond (ifthen, ifnotthen) * new module: Condc (ifthenc, ifnotthenc) * Select: select float levels instead of integer * Infos: rename infos to sinfo and vinfo to infov * Timstat: bug fix (calculate timerange) * Version 0.8.6 released 2004-01-05 Uwe Schulzweida * changes for CDI library version 0.7.8 * New module: Cat (cat) * New module: Selbox (selindexbox, sellonlatbox) * New module: Merge (merge) * New module: Output (output, outputint, outputsrv, outputext) * New module: Genvar (random, const) * New module: Arithconst (addc, subc, mulc, divc) * New module: Math (sqr sqrt exp log log10 sin cos tan asin acos atan) * New module: Ninfo (nyear nmon ndate ntime ncode nvar nlevel) * New module: Showinfo (showyear showmon showdate showtime showcode showvar showlevel) * gridFromName: add default grid name rx * Copy: changed from one to unlimited inputfiles * Split: bug fix for splitcode * Version 0.8.5 released 2003-12-14 Uwe Schulzweida * changes for CDI library version 0.7.7 * pipe bug fix * New module: Lmstat (lmean, lmavg, lmmin, lmmax, lmstd) * New module: Splitrec * Version 0.8.4 released 2003-10-29 Uwe Schulzweida * changes for CDI library version 0.7.5 * Version 0.8.3 released 2003-10-12 Uwe Schulzweida * changes for CDI library version 0.7.4 * changes for CDI library version 0.7.2 (HDF test interface) * New operator: intarea, setctomiss, setmisstoc, setrangetomiss * Version 0.8.2 released 2003-09-22 Uwe Schulzweida * New operator: interpolate (source from PINGO) * Version 0.8.1 released 2003-09-10 Uwe Schulzweida * renamed to CDO (Climate Data Operators) * changes for CDI library version 0.7.0 * replace info with vlist * New operator: splithour, splitday, splitmon * Version 0.8.0 released 2003-07-30 Uwe Schulzweida * changes for gdi library version 0.6.0 * Info.c: handle missing values * Version 0.7.0 released 2003-06-25 Uwe Schulzweida * gdi library version 0.5.11 * New operator: intgridtraj, mastrfu * Version 0.6.4 released 2003-06-23 Uwe Schulzweida * New operator: intgrid, intpoint, inttime * Version 0.6.3 released 2003-06-12 Uwe Schulzweida * gdi library version 0.5.9 * grib library version 0.4.5 * Version 0.6.2 released 2003-05-17 Uwe Schulzweida * add module Spectral with operator sp2gp, gp2sp and sp2sp * Version 0.6.1 released 2003-04-06 Uwe Schulzweida * Version 0.6.0 released