#!/usr/bin/env expect
############################################################################
# Purpose: Test of SLURM functionality
#          sacctmgr add multiple accounts
#
# Output:  "TEST: #.#" followed by "SUCCESS" if test was successful, OR
#          "FAILURE: ..." otherwise with an explanation of the failure, OR
#          anything else indicates a failure mode that must be investigated.
############################################################################
# Copyright (C) 2008-2010 Lawrence Livermore National Security.
# Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
# Written by Joseph Donaghy <donaghy1@llnl.gov>
# CODE-OCEC-09-009. All rights reserved.
#
# This file is part of SLURM, a resource management program.
# For details, see <http://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# SLURM is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# SLURM is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with SLURM; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals
source ./globals_accounting

set test_id     "21.11"
set exit_code   0
set almatches   0
set damatches   0
set dcmatches   0
# Cluster Names #
set tc1		"test$test_id-cluster-1"
set tc2		"test$test_id-cluster-2"
# Cluster values #
array set cluster {}
set cluster(Fairshare)     2500
set cluster(MaxCPUs)       100
set cluster(MaxJobs)       50
set cluster(MaxNodes)      300
set cluster(MaxWall)       01:00:00
# Account Name #
set ta1		"test$test_id-account.1"
set ta2		"test$test_id-account.2"
# Account Limits #
array set acct {}
set acct(Cluster)       $tc1
set acct(Fairshare)     2500
set acct(GrpCPUMins)    100
set acct(GrpCPURunMins) 150
set acct(GrpCPUs)       50
set acct(GrpJobs)       100
set acct(GrpMemory)     60
set acct(GrpSubmitJobs) 500
set acct(GrpNodes)      100
set acct(GrpWall)       00:45:00
set acct(MaxCPUMins)    100000
set acct(MaxCPUs)       100
set acct(MaxJobs)       50
set acct(MaxSubmitJobs) 60
set acct(MaxNodes)      300
set acct(MaxWall)       01:00:00
set acct(DefaultQos)    "test$test_id\_qos"
set acct(Organization)  "Account_Org_A1"
set acct(Description)   "Test_Account_A1"

set access_err  0
set timeout 60

print_header $test_id

if { [test_account_storage] == 0 } {
	send_user "\nWARNING: This test can't be run without a usable AccountStorageType\n"
	exit 0
}

#
# Verify if Administrator privileges
#
 if { [string compare [check_accounting_admin_level] "Administrator"] } {
	send_user "\nWARNING: This test can't be run without being an Accounting administrator.\nUse: sacctmgr mod user \$USER set admin=admin.\n"
	exit 0
}

#make sure we have a clean system and permission to do this work
remove_acct "" "$ta1,$ta2"
remove_cluster "$tc1,$tc2"
if {$access_err != 0} {
	send_user "\nWARNING: not authorized to perform this test\n"
	exit $exit_code
}

#
# Add test Cluster
#
add_cluster "$tc1,$tc2" [array get cluster]

if {$access_err != 0} {
	send_user "\nWARNING: not authorized to perform this test\n"
	exit $exit_code
}

if { ![check_acct_associations] } {
	send_user "\nFAILURE:  Our associations don't line up\n"
	set exit_code 1
}

#
# Create tmp QOS
#
set qos_set 0
spawn $sacctmgr -i add qos $acct(DefaultQos)
expect {
	-re "Adding QOS" {
		set qos_set 1
		exp_continue
	}
	timeout {
		send_user "\nFAILURE: sacctmgr is not responding\n"
		set exit_code 1
	}
	eof {
		wait
	}
}
if {$qos_set != 1} {
	send_user "\nFAILURE QOS $acct(DefaultQos) was not created\n"
	set exit_code 1
}

#
# Add test Account
#
add_acct "$ta1,$ta2" [array get acct]

#
# Use sacctmgr to list the test associations
#
set as_list_pid [spawn $sacctmgr -p list associations cluster=$tc1,$tc2]
expect {
	-re "$tc1.$ta1" {
		incr almatches
		exp_continue
	}
	-re "$tc1.$ta2" {
		incr almatches
		exp_continue
	}
	-re "$tc2.$ta1" {
		set exit_code 1
		send_user "\nFAILURE: $ta1 account erroneously added to $tc2\n"
		exp_continue
	}
	-re "$tc2.$ta2" {
		exp_continue
		send_user "\nFAILURE: $ta2 account erroneously added to $tc2\n"
		set exit_code 1
	}
	timeout {
		send_user "\nFAILURE: sacctmgr list associations not responding\n"
		slow_kill $as_list_pid
		set exit_code 1
	}
	eof {
		wait
	}
}

if {$almatches != 2} {
	send_user "\nFAILURE: Added associations not found.\n"
	send_user "\n Need 2 matches and got $almatches instead.\n"
	set exit_code 1
}
# Check that the Association was set correctly
check_assoc_limit 2 account $ta1 [array get acct]

check_assoc_limit 2 account $ta2 [array get acct]

if { ![check_acct_associations] } {
	send_user "\nFAILURE:  Our associations don't line up\n"
	set exit_code 1
}

#
# Use sacctmgr to delete the test account
#
set sadel_pid [spawn $sacctmgr -i delete account $ta1,$ta2]
expect {
	-re "Deleting account" {
		incr damatches
		exp_continue
	}
	timeout {
		send_user "\nFAILURE: sacctmgr delete not responding\n"
		slow_kill $sadel_pid
		set exit_code 1
	}
	eof {
		wait
	}
}

if {$damatches != 1} {
	send_user "\nFAILURE: sacctmgr had a problem deleting cluster got $damatches\n"
	set exit_code 1
}

if { ![check_acct_associations] } {
	send_user "\nFAILURE:  Our associations don't line up\n"
	set exit_code 1
}

#
# Use sacctmgr to delete the test cluster
#
set sadel_pid [spawn $sacctmgr -i delete cluster $tc1,$tc2]
expect {
	-re "Deleting clusters" {
		incr dcmatches
		exp_continue
	}
	timeout {
		send_user "\nFAILURE: sacctmgr delete not responding\n"
		slow_kill $sadel_pid
		set exit_code 1
	}
	eof {
		wait
	}
}

if {$dcmatches != 1} {
	send_user "\nFAILURE: sacctmgr had a problem deleting cluster got $dcmatches\n"
	set exit_code 1
}

#
# Delete Qos
#
set dmatches 0
set sadel_pid [spawn $sacctmgr -i delete qos $acct(DefaultQos)]
expect {
	-re "Deleting QOS" {
		incr dmatches
		exp_continue
	}
	timeout {
		send_user "\nFAILURE: sacctmgr delete not responding\n"
		slow_kill $sadel_pid
		set exit_code 1
	}
	eof {
		wait
	}
}

if {$dmatches != 1} {
	send_user "\nFAILURE: sacctmgr had a problem deleting QOS got $dmatches\n"
	set exit_code 1
}

#
# Use sacctmgr to list the test associations
#
set as2_list_pid [spawn $sacctmgr list association cluster=$tc1 ]
expect {
	-re "$tc1 *$ta1" {
		exp_continue
		send_user "\nFAILURE: test associations still exist.\n"
		set exit_code 1
	}
	-re "$tc1 *$ta2" {
		exp_continue
		send_user "\nFAILURE: test associations still exist.\n"
		set exit_code 1
	}
	timeout {
		send_user "\nTest associations delete verified.\n"
		slow_kill $as2_list_pid
	}
	eof {
		wait
	}
}

if { ![check_acct_associations] } {
	send_user "\nFAILURE:  Our associations don't line up\n"
	set exit_code 1
}

if {$exit_code == 0} {
	print_success $test_id
		} else {
	send_user "\nFAILURE\n"
		}

exit $exit_code
