/*****************************************************************************\
 *  jobacct_gather_cgroup.c - slurm job accounting gather plugin for cgroup.
 *****************************************************************************
 *  Copyright (C) 2011 Bull.
 *  Written by Martin Perry, <martin.perry@bull.com>, who borrowed heavily
 *  from other parts of SLURM
 *  CODE-OCEC-09-009. All rights reserved.
 *
 *  This file is part of Slurm, a resource management program.
 *  For details, see <https://slurm.schedmd.com/>.
 *  Please also read the included file: DISCLAIMER.
 *
 *  Slurm is free software; you can redistribute it and/or modify it under
 *  the terms of the GNU General Public License as published by the Free
 *  Software Foundation; either version 2 of the License, or (at your option)
 *  any later version.
 *
 *  In addition, as a special exception, the copyright holders give permission
 *  to link the code of portions of this program with the OpenSSL library under
 *  certain conditions as described in each individual source file, and
 *  distribute linked combinations including the two. You must obey the GNU
 *  General Public License in all respects for all of the code used other than
 *  OpenSSL. If you modify file(s) with this exception, you may extend this
 *  exception to your version of the file(s), but you are not obligated to do
 *  so. If you do not wish to do so, delete this exception statement from your
 *  version.  If you delete this exception statement from all source files in
 *  the program, then also delete it here.
 *
 *  Slurm is distributed in the hope that it will be useful, but WITHOUT ANY
 *  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 *  FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 *  details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with Slurm; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
 *
 *  This file is patterned after jobcomp_linux.c, written by Morris Jette and
 *  Copyright (C) 2002 The Regents of the University of California.
\*****************************************************************************/

#include <fcntl.h>
#include <signal.h>
#include "src/common/slurm_xlator.h"
#include "src/common/slurm_protocol_api.h"
#include "src/common/slurm_protocol_defs.h"
#include "src/common/slurm_acct_gather_energy.h"
#include "src/common/xstring.h"
#include "src/slurmd/common/proctrack.h"
#include "src/slurmd/common/xcpuinfo.h"
#include "src/slurmd/slurmd/slurmd.h"
#include "src/plugins/jobacct_gather/cgroup/jobacct_gather_cgroup.h"
#include "../common/common_jag.h"

#define _DEBUG 0

/* These are defined here so when we link with something other than
 * the slurmd we will have these symbols defined.  They will get
 * overwritten when linking with the slurmd.
 */
#if defined (__APPLE__)
slurmd_conf_t *conf __attribute__((weak_import));
int bg_recover __attribute__((weak_import)) = NOT_FROM_CONTROLLER;
#else
slurmd_conf_t *conf;
int bg_recover = NOT_FROM_CONTROLLER;
#endif


/*
 * These variables are required by the generic plugin interface.  If they
 * are not found in the plugin, the plugin loader will ignore it.
 *
 * plugin_name - a string giving a human-readable description of the
 * plugin.  There is no maximum length, but the symbol must refer to
 * a valid string.
 *
 * plugin_type - a string suggesting the type of the plugin or its
 * applicability to a particular form of data or method of data handling.
 * If the low-level plugin API is used, the contents of this string are
 * unimportant and may be anything.  Slurm uses the higher-level plugin
 * interface which requires this string to be of the form
 *
 *	<application>/<method>
 *
 * where <application> is a description of the intended application of
 * the plugin (e.g., "jobacct" for Slurm job completion logging) and <method>
 * is a description of how this plugin satisfies that application.  Slurm will
 * only load job completion logging plugins if the plugin_type string has a
 * prefix of "jobacct/".
 *
 * plugin_version - an unsigned 32-bit integer containing the Slurm version
 * (major.minor.micro combined into a single number).
 */
const char plugin_name[] = "Job accounting gather cgroup plugin";
const char plugin_type[] = "jobacct_gather/cgroup";
const uint32_t plugin_version = SLURM_VERSION_NUMBER;

/* Other useful declarations */
static slurm_cgroup_conf_t slurm_cgroup_conf;

static void _prec_extra(jag_prec_t *prec)
{
	unsigned long utime, stime, total_rss, total_pgpgin;
	char *cpu_time = NULL, *memory_stat = NULL, *ptr;
	size_t cpu_time_size = 0, memory_stat_size = 0;

	//DEF_TIMERS;
	//START_TIMER;
	/* info("before"); */
	/* print_jag_prec(prec); */
	xcgroup_get_param(&task_cpuacct_cg, "cpuacct.stat",
			  &cpu_time, &cpu_time_size);
	if (cpu_time == NULL) {
		debug2("%s: failed to collect cpuacct.stat pid %d ppid %d",
		       __func__, prec->pid, prec->ppid);
	} else {
		sscanf(cpu_time, "%*s %lu %*s %lu", &utime, &stime);
		prec->usec = utime;
		prec->ssec = stime;
	}

	xcgroup_get_param(&task_memory_cg, "memory.stat",
			  &memory_stat, &memory_stat_size);
	if (memory_stat == NULL) {
		debug2("%s: failed to collect memory.stat  pid %d ppid %d",
		       __func__, prec->pid, prec->ppid);
	} else {
		/*
		 * This number represents the amount of "dirty" private memory
		 * used by the cgroup.  From our experience this is slightly
		 * different than what proc presents, but is probably more
		 * accurate on what the user is actually using.
		 */
		if ((ptr = strstr(memory_stat, "total_rss"))) {
			sscanf(ptr, "total_rss %lu", &total_rss);
			prec->tres_data[TRES_ARRAY_MEM].size_read = total_rss;
		}

		/*
		 * total_pgmajfault is what is reported in proc, so we use
		 * the same thing here.
		 */
		if ((ptr = strstr(memory_stat, "total_pgmajfault"))) {
			sscanf(ptr, "total_pgmajfault %lu", &total_pgpgin);
			prec->tres_data[TRES_ARRAY_PAGES].size_read =
				total_pgpgin;
		}
	}

	xfree(cpu_time);
	xfree(memory_stat);

	/* FIXME: Enable when kernel support ready.
	 *
	 * "Read" and "Write" from blkio.throttle.io_service_bytes are
	 * counts of bytes read and written for physical disk I/Os only.
	 * These counts do not include disk I/Os satisfied from cache.
	 */
	/* int dev_major; */
	/* uint64_t read_bytes, write_bytes, tot_read, tot_write; */
	/* char *blkio_bytes, *next_device; */
	/* size_t blkio_bytes_size; */
	/* xcgroup_get_param(&task_blkio_cg, "blkio.throttle.io_service_bytes", */
	/*                   &blkio_bytes, &blkio_bytes_size); */
	/* next_device = blkio_bytes; */
	/* tot_read = tot_write = 0; */
	/* while ((sscanf(next_device, "%d:", &dev_major)) > 0) { */
	/* 	if ((dev_major > 239) && (dev_major < 255)) */
	/* 		/\* skip experimental device codes *\/ */
	/* 		continue; */
	/* 	next_device = strstr(next_device, "Read"); */
	/* 	sscanf(next_device, "%*s %"PRIu64"", &read_bytes); */
	/* 	next_device = strstr(next_device, "Write"); */
	/* 	sscanf(next_device, "%*s %"PRIu64"", &write_bytes); */
	/* 	tot_read+=read_bytes; */
	/* 	tot_write+=write_bytes; */
	/* 	next_device = strstr(next_device, "Total"); */
	/* } */
	/* prec->disk_read = (double)tot_read / (double)1048576; */
	/* prec->disk_write = (double)tot_write / (double)1048576; */

	/* info("after %d %d", total_rss); */
	/* print_jag_prec(prec); */
	//END_TIMER;
	//info("took %s", TIME_STR);
	return;

}

static bool _run_in_daemon(void)
{
	static bool set = false;
	static bool run = false;

	if (!set) {
		set = 1;
		run = run_in_daemon("slurmstepd");
	}

	return run;
}

/*
 * init() is called when the plugin is loaded, before any other functions
 * are called.  Put global initialization here.
 */
extern int init (void)
{
	/* If running on the slurmctld don't do any of this since it
	   isn't needed.
	*/
	if (_run_in_daemon()) {
		jag_common_init(0);

		/* read cgroup configuration */
		if (read_slurm_cgroup_conf(&slurm_cgroup_conf))
			return SLURM_ERROR;

		/* initialize cpuinfo internal data */
		if (xcpuinfo_init() != XCPUINFO_SUCCESS) {
			free_slurm_cgroup_conf(&slurm_cgroup_conf);
			return SLURM_ERROR;
		}

		/* enable cpuacct cgroup subsystem */
		if (jobacct_gather_cgroup_cpuacct_init(&slurm_cgroup_conf) !=
		    SLURM_SUCCESS) {
			xcpuinfo_fini();
			free_slurm_cgroup_conf(&slurm_cgroup_conf);
			return SLURM_ERROR;
		}

		/* enable memory cgroup subsystem */
		if (jobacct_gather_cgroup_memory_init(&slurm_cgroup_conf) !=
		    SLURM_SUCCESS) {
			xcpuinfo_fini();
			free_slurm_cgroup_conf(&slurm_cgroup_conf);
			return SLURM_ERROR;
		}

		/* FIXME: Enable when kernel support ready.
		 *
		 * Enable blkio subsystem.
		 */
		/* if (jobacct_gather_cgroup_blkio_init(&slurm_cgroup_conf) */
		/*     != SLURM_SUCCESS) { */
		/* 	xcpuinfo_fini(); */
		/* 	free_slurm_cgroup_conf(&slurm_cgroup_conf); */
		/* 	return SLURM_ERROR; */
		/* } */
	}

	debug("%s loaded", plugin_name);
	return SLURM_SUCCESS;
}

extern int fini (void)
{
	if (_run_in_daemon()) {
		jobacct_gather_cgroup_cpuacct_fini(&slurm_cgroup_conf);
		jobacct_gather_cgroup_memory_fini(&slurm_cgroup_conf);
		/* jobacct_gather_cgroup_blkio_fini(&slurm_cgroup_conf); */
		acct_gather_energy_fini();

		/* unload configuration */
		free_slurm_cgroup_conf(&slurm_cgroup_conf);
	}
	return SLURM_SUCCESS;
}

/*
 * jobacct_gather_p_poll_data() - Build a table of all current processes
 *
 * IN/OUT: task_list - list containing current processes.
 * IN: pgid_plugin - if we are running with the pgid plugin.
 * IN: cont_id - container id of processes if not running with pgid.
 *
 * OUT:	none
 *
 * THREADSAFE! Only one thread ever gets here.  It is locked in
 * slurm_jobacct_gather.
 *
 * Assumption:
 *    Any file with a name of the form "/proc/[0-9]+/stat"
 *    is a Linux-style stat entry. We disregard the data if they look
 *    wrong.
 */
extern void jobacct_gather_p_poll_data(
	List task_list, bool pgid_plugin, uint64_t cont_id, bool profile)
{
	static jag_callbacks_t callbacks;
	static bool first = 1;

	if (first) {
		memset(&callbacks, 0, sizeof(jag_callbacks_t));
		first = 0;
		callbacks.prec_extra = _prec_extra;
	}

	jag_common_poll_data(task_list, pgid_plugin, cont_id, &callbacks,
			     profile);

	return;
}

extern int jobacct_gather_p_endpoll(void)
{
	jag_common_fini();

	return SLURM_SUCCESS;
}

extern int jobacct_gather_p_add_task(pid_t pid, jobacct_id_t *jobacct_id)
{
	if (jobacct_gather_cgroup_cpuacct_attach_task(pid, jobacct_id) !=
	    SLURM_SUCCESS)
		return SLURM_ERROR;

	if (jobacct_gather_cgroup_memory_attach_task(pid, jobacct_id) !=
	    SLURM_SUCCESS)
		return SLURM_ERROR;

	/* if (jobacct_gather_cgroup_blkio_attach_task(pid, jobacct_id) != */
	/*     SLURM_SUCCESS) */
	/* 	return SLURM_ERROR; */

	return SLURM_SUCCESS;
}

extern char* jobacct_cgroup_create_slurm_cg(xcgroup_ns_t* ns)
 {
	/* we do it here as we do not have access to the conf structure */
	/* in libslurm (src/common/xcgroup.c) */
	xcgroup_t slurm_cg;
	char* pre = (char*) xstrdup(slurm_cgroup_conf.cgroup_prepend);

#ifdef MULTIPLE_SLURMD
	if (conf->node_name != NULL) {
		xstrsubstitute(pre, "%n", conf->node_name);
	} else {
		xfree(pre);
		pre = (char*) xstrdup("/slurm");
	}
#endif

	/* create slurm cgroup in the ns (it could already exist) */
	if (xcgroup_create(ns, &slurm_cg, pre,
			   getuid(), getgid()) != XCGROUP_SUCCESS) {
		return pre;
	}

	if (xcgroup_instantiate(&slurm_cg) != XCGROUP_SUCCESS) {
		error("unable to build slurm cgroup for ns %s: %m",
		      ns->subsystems);
		xcgroup_destroy(&slurm_cg);
		return pre;
	} else {
		debug3("slurm cgroup %s successfully created for ns %s: %m",
		       pre, ns->subsystems);
		xcgroup_destroy(&slurm_cg);
	}

	return pre;
}
