# Advanced Resource Reservation Guide

Slurm has the ability to reserve resources for jobs being executed by select users and/or select bank accounts. A resource reservation identifies the resources in that reservation and a time period during which the reservation is available. The resources which can be reserved include cores, nodes, licenses and/or burst buffers. Note that resource reservations are not compatible with Slurm's gang scheduler plugin since the termination time of running jobs cannot be accurately predicted.

Note that reserved burst buffers and licenses are treated somewhat differently than reserved cores or nodes. When cores or nodes are reserved, then jobs using that reservation can use only those resources and no other jobs can use those resources. Reserved burst buffers and licenses can only be used by jobs associated with that reservation, but licenses not explicitly reserved are available to any job. This eliminates the need to explicitly put licenses into every advanced reservation created.

Reservations can be created, updated, or destroyed only by user root or the configured SlurmUser using the scontrol command. The scontrol, smap and sview commands can be used to view reservations. The man pages for the various commands contain details.

Note for users of Maui or Moab schedulers:
Maui and Moab are not integrated with Slurm's resource reservation system, but should use their own advanced reservation system.

## Reservation Creation

One common mode of operation for a reservation would be to reserve an entire computer at a particular time for a system down time. The example below shows the creation of a full-system reservation at 16:00 hours on 6 February and lasting for 120 minutes. The "maint" flag is used to identify the reservation for accounting purposes as system maintenance. The "ignore_jobs" flag is used to indicate that we can ignore currently running jobs when creating this reservation. By default, only resources which are not expected to have a running job at the start time can be reserved (the time limit of all running jobs will have been reached). In this case we can manually cancel the running jobs as needed to perform system maintenance. As the reservation time approaches, only jobs that can complete by the reservation time will be initiated.

    $ scontrol create reservation starttime=2009-02-06T16:00:00 \
       duration=120 user=root flags=maint,ignore_jobs nodes=ALL
    Reservation created: root_3

    $ scontrol show reservation
    ReservationName=root_3 StartTime=2009-02-06T16:00:00
       EndTime=2009-02-06T18:00:00 Duration=120
       Nodes=ALL NodeCnt=20
       Features=(null) PartitionName=(null)
       Flags=MAINT,SPEC_NODES,IGNORE_JOBS Licenses=(null)
       BurstBuffers=(null)
       Users=root Accounts=(null)

A variation of this would be to configure license to represent system resources, such as a global file system. The system resource may not require an actual license for use, but Slurm licenses can be used to prevent jobs needed the resource from being started when that resource is unavailable. One could create a reservation for all of those licenses in order to perform maintenance on that resource. In the example below, we create a reservation for 1000 licenses with the name of "lustre". If there are a total of 1000 lustre licenses configured in this cluster, this reservation will prevent any job specifying the need for needed a lustre license from being scheduled on this cluster during this reservation.

    $ scontrol create reservation starttime=2009-04-06T16:00:00 \
       duration=120 user=root flags=license_only \
       licenses=lustre:1000
    Reservation created: root_4

    $ scontrol show reservation
    ReservationName=root_4 StartTime=2009-04-06T16:00:00
       EndTime=2009-04-06T18:00:00 Duration=120
       Nodes= NodeCnt=0
       Features=(null) PartitionName=(null)
       Flags=LICENSE_ONLY Licenses=lustre*1000
       BurstBuffers=(null)
       Users=root Accounts=(null)

Another mode of operation would be to reserve specific nodes for an indefinite period in order to study problems on those nodes. This could also be accomplished using a Slurm partition specifically for this purpose, but that would fail to capture the maintenance nature of their use.

    $ scontrol create reservation user=root starttime=now \
       duration=infinite flags=maint nodes=sun000
    Reservation created: root_5

    $ scontrol show res
    ReservationName=root_5 StartTime=2009-02-04T16:22:57
       EndTime=2009-02-04T16:21:57 Duration=4294967295
       Nodes=sun000 NodeCnt=1
       Features=(null) PartitionName=(null)
       Flags=MAINT,SPEC_NODES Licenses=(null)
       BurstBuffers=(null)
       Users=root Accounts=(null)

Our next example is to reserve ten nodes in the default Slurm partition starting at noon and with a duration of 60 minutes occurring daily. The reservation will be available only to users "alan" and "brenda".

    $ scontrol create reservation user=alan,brenda \
       starttime=noon duration=60 flags=daily nodecnt=10
    Reservation created: alan_6

    $ scontrol show res
    ReservationName=alan_6 StartTime=2009-02-05T12:00:00
       EndTime=2009-02-05T13:00:00 Duration=60
       Nodes=sun[000-003,007,010-013,017] NodeCnt=10
       Features=(null) PartitionName=pdebug
       Flags=DAILY Licenses=(null) BurstBuffers=(null)
       Users=alan,brenda Accounts=(null)

Our next example is to reserve 100GB of burst buffer space starting at noon today and with a duration of 60 minutes. The reservation will be available only to users "alan" and "brenda".

    $ scontrol create reservation user=alan,brenda \
       starttime=noon duration=60 flags=any_nodes burstbuffer=100GB
    Reservation created: alan_7

    $ scontrol show res
    ReservationName=alan_7 StartTime=2009-02-05T12:00:00
       EndTime=2009-02-05T13:00:00 Duration=60
       Nodes= NodeCnt=0
       Features=(null) PartitionName=(null)
       Flags=ANY_NODES Licenses=(null) BurstBuffer=100GB
       Users=alan,brenda Accounts=(null)

Reservations can be optimized with respect to system topology if the reservation request includes information about the sizes of jobs to be created. This is especially important for BlueGene systems due to restrictive rules about the topology of created blocks (due to hardware constraints and/or Slurm's configuration). To take advantage of this optimization, specify the sizes of jobs of to be concurrently executed. The example below creates a reservation containing 4096 c-nodes on a BlueGene system so that two 2048 c-node jobs can execute simultaneously.

    $ scontrol create reservation user=alan,brenda \
       starttime=noon duration=60 nodecnt=2k,2k
    Reservation created: alan_8

    $ scontrol show res
    ReservationName=alan_8 StartTime=2011-12-05T12:00:00
       EndTime=2011-12-05T13:00:00 Duration=60
       Nodes=bgp[000x011,210x311] NodeCnt=4096
       Features=(null) PartitionName=pdebug
       Flags= Licenses=(null) BurstBuffers=(null)
       Users=alan,brenda Accounts=(null)

Note that specific nodes to be associated with the reservation are identified immediately after creation of the reservation. This permits users to stage files to the nodes in preparation for use during the reservation. Note that the reservation creation request can also identify the partition from which to select the nodes or _one_ feature that every selected node must contain.

On a smaller system, one might want to reserve cores rather than whole nodes. This capability permits the administrator to identify the core count to be reserved on each node as shown in the examples below.
NOTE: Core reservations are not available on IBM BlueGene or Cray/ALPS systems, nor when the system is configured to use the select/linear or select/serial plugins.

    # Create a two core reservation for user alan
    $ scontrol create reservation StartTime=now Duration=60 \
      NodeCnt=1 CoreCnt=2 User=alan

    # Create a reservation for user brenda with two cores on
    # node tux8 and 4 cores on node tux9
    $ scontrol create reservation StartTime=now Duration=60 \
      Nodes=tux8,tux9 CoreCnt=2,4 User=brenda

Reservations can not only be created for the use of specific accounts and users, but specific accounts and/or users can be prevented from using them. In the following example, a reservation is created for account "foo", but user "alan" is prevented from using the reservation even when using the account "foo".

    $ scontrol create reservation account=foo \
       user=-alan partition=pdebug \
       starttime=noon duration=60 nodecnt=2k,2k
    Reservation created: alan_9

    $ scontrol show res
    ReservationName=alan_9 StartTime=2011-12-05T13:00:00
       EndTime=2011-12-05T14:00:00 Duration=60
       Nodes=bgp[000x011,210x311] NodeCnt=4096
       Features=(null) PartitionName=pdebug
       Flags= Licenses=(null) BurstBuffers=(null)
       Users=-alan Accounts=foo

## Reservation Use

The reservation create response includes the reservation's name. This name is automatically generated by Slurm based upon the first user or account name and a numeric suffix. In order to use the reservation, the job submit request must explicitly specify that reservation name. The job must be contained completely within the named reservation. The job will be canceled after the reservation reaches its EndTime. If letting the job continue execution after the reservation EndTime, a configuration option ResvOverRun in slurm.conf can be set to control how long the job can continue execution.

    $ sbatch --reservation=alan_6 -N4 my.script
    sbatch: Submitted batch job 65540

Note that use of a reservation does not alter a job's priority, but it does act as an enhancement to the job's priority. Any job with a reservation is considered for scheduling to resources before any other job in the same Slurm partition (queue) not associated with a reservation.

## Reservation Modification

Reservations can be modified by user root as desired. For example their duration could be altered or the users granted access changed as shown below:

    $ scontrol update ReservationName=root_3 \
       duration=150 users=admin
    Reservation updated.

    bash-3.00$ scontrol show ReservationName=root_3
    ReservationName=root_3 StartTime=2009-02-06T16:00:00
       EndTime=2009-02-06T18:30:00 Duration=150
       Nodes=ALL NodeCnt=20 Features=(null)
       PartitionName=(null) Flags=MAINT,SPEC_NODES
       Licenses=(null) BurstBuffers=(null)
       Users=admin Accounts=(null)

## Reservation Deletion

Reservations are automatically purged after their end time. They may also be manually deleted as shown below. Note that a reservation can not be deleted while there are jobs running in it.

    $ scontrol delete ReservationName=alan_6

## Overlapping Reservations

By default, reservations must not overlap. They must either include different nodes or operate at different times. If specific nodes are not specified when a reservation is created, Slurm will automatically select nodes to avoid overlap and insure that the selected nodes are available when the reservation begins.

There is very limited support for overlapping reservations with two specific modes of operation available. For ease of system maintenance, you can create a reservation with the "maint" flag that overlaps existing reservations. This permits an administrator to easily create a maintenance reservation for an entire cluster without needing to remove or reschedule pre-existing reservations. Users requesting access to one of these pre-existing reservations will be prevented from using resources that are also in this maintenance reservation. For example, users alan and brenda might have a reservation for some nodes daily from noon until 1PM. If there is a maintenance reservation for all nodes starting at 12:30PM, the only jobs they may start in their reservation would have to be completed by 12:30PM, when the maintenance reservation begins.

The second exception operates in the same manner as a maintenance reservation except that is it not logged in the accounting system as nodes reserved for maintenance. It requires the use of the "overlap" flag when creating the second reservation. This might be used to insure availability of resources for a specific user within a group having a reservation. Using the previous example of alan and brenda having a 10 node reservation for 60 minutes, we might want to reserve 4 nodes of that for for brenda during the first 30 minutes of the time period. In this case, the creation of one overlapping reservation (for a total of two reservations) may be simpler than creating three separate reservations, partly since the use of any reservation requires the job specification of the reservation name.

1. A six node reservation for both alan and brenda that lasts the full 60 minutes
2. A four node reservation for brenda for the first 30 minutes
3. A four node reservation for both alan and brenda that lasts for the final 30 minutes

If the "maint" or "overlap" flag is used when creating reservations, one could create a reservation within a reservation within a third reservation. Note a reservation having a "maint" or "overlap" flag will not have resources removed from it by a subsequent reservation also having a "maint" or "overlap" flag, so nesting of reservations only works to a depth of two.

## Reservations Floating Through Time

Slurm can be used to create an advanced reservation with a start time that remains a fixed period of time in the future. These reservation are not intended to run jobs, but to prevent long running jobs from being initiated on specific nodes. That node might be placed in a DRAINING state to prevent any new jobs from being started there. Alternately, an advanced reservation might be placed on the node to prevent jobs exceeding some specific time limit from being started. Attempts by users to make use of a reservation with a floating start time will be rejected. When ready to perform the maintenance, place the node in DRAINING state and delete the previously created advanced reservation.

Create the reservation by using the flag value of TIME_FLOAT and a start time that is relative to the current time (use the keyword now). The reservation duration should generally be a value which is large relative to typical job run times in order to not adversely impact backfill scheduling decisions. Alternately the reservation can have a specific end time, in which case the reservation's start time will increase through time until the reservation's end time is reached. When the current time passes the reservation end time then the reservation will be purged. In the example below, node tux8 is prevented from starting any jobs exceeding a 60 minute time limit. The duration of this reservation is 100 (minutes).

    $ scontrol create reservation user=operator nodes=tux8 \
      starttime=now+60minutes duration=100 flags=time_float

## Reservations that Replace Allocated Resources

Slurm can create an advanced reservation for which nodes which are allocated to jobs are automatically replaced with new idle nodes. The effect of this is to always maintain a constant size pool of resources. This is accomplished by using a "replace" flag as shown in the example below. This option is not supported on IBM Bluegene systems.

    $ scontrol create reservation starttime=now duration=60 \
      users=foo nodecnt=2 flags=replace
    Reservation created: foo_82

    $ scontrol show res
    ReservationName=foo_82 StartTime=2014-11-20T16:21:11
       EndTime=2014-11-20T17:21:11 Duration=01:00:00
       Nodes=tux[0-1] NodeCnt=2 CoreCnt=12 Features=(null)
       PartitionName=debug Flags=REPLACE
       Users=jette Accounts=(null) Licenses=(null) State=ACTIVE

    $ sbatch -n4 --reservation=foo_82 tmp
    Submitted batch job 97

    $ scontrol show res
    ReservationName=foo_82 StartTime=2014-11-20T16:21:11
       EndTime=2014-11-20T17:21:11 Duration=01:00:00
       Nodes=tux[1-2] NodeCnt=2 CoreCnt=12 Features=(null)
       PartitionName=debug Flags=REPLACE
       Users=jette Accounts=(null) Licenses=(null) State=ACTIVE

    $ sbatch -n4 --reservation=foo_82 tmp
    Submitted batch job 98

    $ scontrol show res
    ReservationName=foo_82 StartTime=2014-11-20T16:21:11
       EndTime=2014-11-20T17:21:11 Duration=01:00:00
       Nodes=tux[2-3] NodeCnt=2 CoreCnt=12 Features=(null)
       PartitionName=debug Flags=REPLACE
       Users=jette Accounts=(null) Licenses=(null) State=ACTIVE

    $ squeue
    JOBID PARTITION  NAME  USER ST  TIME  NODES NODELIST(REASON)
       97     debug   tmp   foo  R  0:09      1 tux0
       98     debug   tmp   foo  R  0:07      1 tux1

## Reservation Accounting

Jobs executed within a reservation are accounted for using the appropriate user and bank account. If resources within a reservation are not used, those resources will be accounted for as being used by all users or bank accounts associated with the reservation on an equal basis (e.g. if two users are eligible to use a reservation and neither does, each user will be reported to have used half of the reserved resources).

## Prolog and Epilog

Slurm supports both a reservation prolog and epilog. They may be configured using the ResvProlog and ResvEpilog configuration parameters in the slurm.conf file. These scripts can be used to cancel jobs, modify partition configuration, etc.

## Future Work

Reservations made within a partition having gang scheduling assumes the highest level rather than the actual level of time-slicing when considering the initiation of jobs. This will prevent the initiation of some jobs which would complete execution before a reservation given fewer jobs to time-slice with.

Last modified 20 October 2015