#!/usr/bin/expect
############################################################################
# Purpose:  Test of route/topology plugin
#
# Output:  "TEST: #.#" followed by "SUCCESS" if test was successful, OR
#          "FAILURE: ..." otherwise with an explanation of the failure, OR
#          anything else indicates a failure mode that must be investigated.
#
############################################################################
#  Copyright (C) 2014 Bull S. A. S.
#		Bull, Rue Jean Jaures, B.P.68, 78340, Les Clayes-sous-Bois.
#  Written by Rod Schultz <Rod.Schultz@bull.com>
#
# This file is part of SLURM, a resource management program.
# For details, see <http://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# SLURM is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# SLURM is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with SLURM; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals

# The test program calls the route_g_splithostlist api on testcases
# in a testcase file.
#
# The test program is also given a path to a directory containing
# a slurm.conf, topology.conf and testcase file that assumes those config.
# These directories are named etc33.1.#
#
# The parser if the testcase file is very simple.
# -- lines beginning with # are comments.
# -- line beginning with a line feed ends a testcase.
# -- The first line in the testcase is the node list expression to be split
#    The followiing lines in the testcase are the expected resulting node lists.

set test_id     "33.1"
set exit_code   0
set test_prog   "test$test_id.prog"

print_header $test_id

if { [test_front_end] == 1 } {
	send_user "\nWARNING: Test incompatible with front-end systems\n"
	exit 0
}

# Procedure to run a configuration
proc run_config { test_config } {

	global test_prog cfgcount cfgok wd

	incr cfgcount
	set cfgdir "$wd/$test_config"
	set tc "$wd/$test_config/testcases"
	set local_ok 0

	send_user "\n./${test_prog} --configdir=${cfgdir} --testcases=${tc}\n"
	spawn ./${test_prog} --configdir=${cfgdir} --testcases=${tc}
	expect {
		-re "Failed cases 0" {
			incr cfgok
			incr local_ok
			exp_continue
		}
		eof {
			wait
		}
	}
	if {$local_ok == 0} {
		send_user "*** At least one testcase in $test_config failed!\n"
	}
}

#
# Delete left-over programs and rebuild them
#
file delete $test_prog

if {[test_aix]} {
	send_user "$bin_cc ${test_prog}.c -g -pthread -export-dynamic -o ${test_prog} -I${src_dir} -I${build_dir} ${build_dir}/src/api/libslurm.o  -ldl\n"
	exec       $bin_cc ${test_prog}.c -g -pthread -export-dynamic -o ${test_prog} -I${src_dir} -I${build_dir} ${build_dir}/src/api/libslurm.o  -ldl
} elseif [file exists ${slurm_dir}/lib64/libslurm.so] {
	send_user "$bin_cc ${test_prog}.c -g -pthread -export-dynamic -o ${test_prog} -I${src_dir} -I${build_dir} ${build_dir}/src/api/libslurm.o  -ldl\n"
	exec       $bin_cc ${test_prog}.c -g -pthread -export-dynamic -o ${test_prog} -I${src_dir} -I${build_dir} ${build_dir}/src/api/libslurm.o  -ldl
} else {
	send_user "$bin_cc ${test_prog}.c -g -pthread -export-dynamic -o ${test_prog} -I${src_dir} -I${build_dir} ${build_dir}/src/api/libslurm.o  -ldl\n"
	exec       $bin_cc ${test_prog}.c -g -pthread -export-dynamic -o ${test_prog} -I${src_dir} -I${build_dir} ${build_dir}/src/api/libslurm.o  -ldl
}
exec $bin_chmod 700 $test_prog

log_user 0
set cfgcount 0
set cfgok 0
set wd [pwd]

# Set the default slurm.conf params for all tests
set params "ClusterName=test33
ControlMachine=peta0000
TopologyPlugin=topology/tree
TreeWidth=50

DebugFlags=Route\n"

# Set the params if needed for certain systems
if {[test_cray]} {
	set params "$params
MPIParams=ports=12000-13000\nProctrackType=proctrack/cray\n"
}

###############################################
# test 33.1.1
###############################################
send_user "test33.1.1\n"
set file_in "$wd/etc.33.1.1/slurm.conf"
file delete $file_in
set fd [open "$file_in" a]
puts $fd "$params
RoutePlugin=route/topology

# ================================
# Node and Partition Definitions
# ================================

NodeName=peta\[10000-19999\]
PartitionName=all  Nodes=peta\[10000-19999\] Default=YES"

close $fd
run_config "etc.33.1.1"
file delete $file_in

###############################################
# test 33.1.2
###############################################
send_user "\n\ntest33.1.2\n"
set file_in "$wd/etc.33.1.2/slurm.conf"
file delete $file_in
set fd [open "$file_in" a]
puts $fd "$params
RoutePlugin=route/topology

# ================================
# Node and Partition Definitions
# ================================

NodeName=peta\[10000-19999\]
PartitionName=all  Nodes=peta\[10000-19999\] Default=YES"

close $fd
run_config "etc.33.1.2"
file delete $file_in

###############################################
# test 33.1.3
###############################################
send_user "\n\ntest33.1.3\n"
set file_in "$wd/etc.33.1.3/slurm.conf"
file delete $file_in
set fd [open "$file_in" a]
puts $fd "$params

# ================================
# Node and Partition Definitions
# ================================

NodeName=peta\[10000-10399\]
PartitionName=all  Nodes=peta\[10000-10399\] Default=YES"

close $fd
run_config "etc.33.1.3"
file delete $file_in

###############################################
# test 33.1.4
###############################################
send_user "\n\ntest33.1.4\n"
set file_in "$wd/etc.33.1.4/slurm.conf"
file delete $file_in
set fd [open "$file_in" a]
puts $fd "$params
RoutePlugin=route/topology

# ================================
# Node and Partition Definitions
# ================================

NodeName=peta\[10000-10399\]
PartitionName=all  Nodes=peta\[10000-10399\] Default=YES"

close $fd
run_config "etc.33.1.4"
file delete $file_in

if {$cfgok != $cfgcount} {
	send_user "\n\nFAILURE\n"
	set exit_code 1
} else {
	send_user "\nSUCCESS\n"
	file delete $test_prog
}
exit $exit_code
