#!/usr/bin/expect
############################################################################
# Purpose: Test of SLURM functionality
#          Confirm node selection from within a job step on existing allocation
#          (--nodelist, --exclude, --nodes and --nprocs options).
#
# Output:  "TEST: #.#" followed by "SUCCESS" if test was successful, OR
#          "WARNING: ..." with an explanation of why the test can't be made, OR
#          "FAILURE: ..." otherwise with an explanation of the failure, OR
#          anything else indicates a failure mode that must be investigated.
############################################################################
# Copyright (C) 2002-2007 The Regents of the University of California.
# Copyright (C) 2008-2009 Lawrence Livermore National Security.
# Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
# Written by Morris Jette <jette1@llnl.gov>
# CODE-OCEC-09-009. All rights reserved.
#
# This file is part of SLURM, a resource management program.
# For details, see <http://www.schedmd.com/slurmdocs/>.
# Please also read the included file: DISCLAIMER.
#
# SLURM is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# SLURM is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with SLURM; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals

set test_id     "1.86"
set exit_code   0
set file_in     "test$test_id.input"
set prompt      "PROMPT: "

print_header $test_id

if {[test_front_end]} {
	send_user "\nWARNING: This test is incompatible with front-end systems\n"
	exit 0
} elseif {[test_multiple_slurmd] != 0} {
	send_user "\nWARNING: This test is incompatible with multiple slurmd systems\n"
	exit 0
} elseif {[test_serial]} {
	send_user "\nWARNING: This test is incompatible with a serial system\n"
	exit 0
}

if {[test_launch_poe]} {
	set node_name_env MP_I_UPMD_HOSTNAME
} else {
	set node_name_env SLURMD_NODENAME
}

#
# Build input script file
#
make_bash_script $file_in "
  export PS1=\"$prompt\"
  $bin_bash --norc
"

#
# Expect seems to have trouble parsing with this test due to a bug in Expect.
# It overwrites the stdout parsed with stdin to the commands
# Change PATH to shorten the strings, which seems to help
#
set env(PATH) "${slurm_dir}/bin:$env(PATH)"

#
# Submit a 2 node job
#
set timeout $max_job_delay
set salloc_pid [spawn $salloc -N2 -t1 ./$file_in]
expect {
	-re "Node count specification invalid|More processors requested" {
		send_user "\nWARNING: can't test srun task distribution\n"
		exec $bin_rm -f $file_in
		exit $exit_code
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "Job initiated\n"
	}
	timeout {
		send_user "\nFAILURE: salloc not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		wait
		send_user "\nFAILURE: salloc terminated\n"
		exit 1
	}
}
exec $bin_rm -f $file_in

#
# Get node names
#
set host_0      ""
set host_1      ""
send "$srun -l $bin_printenv $node_name_env\r"
expect {
	-re "($number): *($alpha_numeric_under)" {
		set host_inx $expect_out(1,string)
		if {$host_inx == 0} {
			set host_0 $expect_out(2,string)
		}
		if {$host_inx == 1} {
			set host_1 $expect_out(2,string)
		}
		exp_continue
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}

#
# Verify node count
#
if {[string compare $host_0 ""] == 0} {
	send_user "\nFAILURE: Did not get hostname of task 0\n"
	set exit_code   1
}
if {[string compare $host_1 ""] == 0} {
        send_user "\nFAILURE: Did not get hostname of task 1\n"
	set exit_code   1
}
if {$exit_code != 0} {
	exit $exit_code
}

#
# Exclude specific node
#
set matches 0
send "$srun -l -N1 -n1 --exclude=$host_0 $bin_printenv $node_name_env\r"
expect {
	-re "0: *($alpha_numeric_under)" {
		if {[string compare $expect_out(1,string) $host_1] == 0} {
			incr matches
		} else {
			send_user "\nFAILURE: wrong node responded\n"
			set exit_code   1
		}
		exp_continue
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {$matches == 0} {
	send_user "\nFAILURE: required node failed to respond\n"
	set exit_code   1
}

#
# Exclude specific node
#
set matches 0
send "$srun -l -N1 -n1 --exclude=$host_1 $bin_printenv $node_name_env\r"
expect {
	-re "0: *($alpha_numeric_under)" {
		if {[string compare $expect_out(1,string) $host_0] == 0} {
			incr matches
		} else {
			send_user "\nFAILURE: wrong node responded\n"
			set exit_code   1
		}
		exp_continue
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {$matches == 0} {
	send_user "\nFAILURE: required node failed to respond\n"
	set exit_code   1
}

#
# Include specific node
#
set matches 0
send "$srun -l -N1 -n1 --nodelist=$host_0 $bin_printenv $node_name_env\r"
expect {
	-re "Requested node configuration is not available" {
		send_user "\nWARNING: Appears you are using "
		send_user "multiple slurmd testing.\n"
		send_user "This test won't work in that fashion.\n"
		send "exit\r"
		exit 0
	}
	-re "0: *($alpha_numeric_under)" {
		if {[string compare $expect_out(1,string) $host_0] == 0} {
			incr matches
		} else {
			send_user "\nFAILURE: wrong node responded\n"
			set exit_code   1
		}
		exp_continue
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {$matches == 0} {
	send_user "\nFAILURE: required node failed to respond\n"
	set exit_code   1
}

#
# Include specific node
#
set matches 0
send "$srun -l -N1 -n1 --nodelist=$host_1 $bin_printenv $node_name_env\r"
expect {
	-re "0: *($alpha_numeric_under)" {
		if {[string compare $expect_out(1,string) $host_1] == 0} {
			incr matches
		} else {
			send_user "\nFAILURE: wrong node responded\n"
			set exit_code   1
		}
		exp_continue
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {$matches == 0} {
	send_user "\nFAILURE: required node failed to respond\n"
	set exit_code   1
}

#
# Error test: Overlapping include/exclude node list
# NOTE: some versions of Expect have a problem with long input
#	lines, so we use two send commands for this execute line
#
set matches 0
send "$srun -l -N1 -n1 --nodelist=$host_0 "
send " --exclude=$host_0 $bin_printenv $node_name_env\r"
expect {
	-re "0: *($alpha_numeric_under)" {
		send_user "\nFAILURE: wrong node responded\n"
		set exit_code   1
		exp_continue
	}
	"error:" {
		send_user "This error is expected, no worries\n"
		incr matches
		exp_continue
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {$matches == 0} {
	send_user "\nFAILURE: No error for overlapping include/exclude node list\n"
	set exit_code   1
}

#
# Error test: Exceed node count
#
set matches 0
send "$srun -l -N3 -n3 -O $bin_printenv $node_name_env\r"
expect {
	-re "0: *($alpha_numeric_under)" {
		send_user "\nFAILURE: wrong node responded\n"
		set exit_code   1
		exp_continue
	}
	"error:" {
		send_user "This error is expected, no worries\n"
		incr matches
		exp_continue
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {$matches == 0} {
	send_user "\nFAILURE: No error for exceeding node count\n"
	set exit_code   1
}

#
# Run with fewer nodes
#
set test_0      ""
set test_1      ""
send "$srun -l -N1-1 -n2 -O $bin_printenv $node_name_env\r"
expect {
	-re "($number).($number):($alpha_numeric_under)" {
		set test_0 $expect_out(3,string)
		set test_1 $expect_out(3,string)
		exp_continue
	}
	-re "($number): ($alpha_numeric_under)" {
		set host_inx $expect_out(1,string)
		if {$host_inx == 0} {
			set test_0 $expect_out(2,string)
		}
		if {$host_inx == 1} {
			set test_1 $expect_out(2,string)
		}
		exp_continue
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {[string compare $test_0 $test_1] != 0} {
	send_user "\nFAILURE: Multiple nodes responded, should be only one\n"
	set exit_code   1
}

#
# Error test: Exceed task count, first get the processor count then exceed it
#
set processors 1
send "$srun -l -c1 $bin_printenv $node_name_env\r"
expect {
	-re "($number)-($number):($alpha_numeric_under)" {
		set processors [expr $processors + $expect_out(2,string) - $expect_out(1,string) + 1]
		exp_continue
	}
	-re "($number): *($alpha_numeric_under)" {
		incr processors
		exp_continue
	}
	-re "Unable to contact" {
		send_user "\nFAILURE: slurm appears to be down\n"
		exit 1
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
set matches 0
send "$srun -l -n $processors $bin_printenv $node_name_env\r"
expect {
	-re "0: *($alpha_numeric_under)" {
		send_user "\nFAILURE: wrong node responded\n"
		set exit_code   1
		exp_continue
	}
	"error:" {
		incr matches
		exp_continue
	}
	"$prompt" {
		send_user "srun completed\n\n"
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		send_user "\nFAILURE: srun EOF\n"
		exit 1
	}
}
if {$matches == 0} {
	send_user "\nFAILURE: No error for exceeding processor count\n"
	set exit_code   1
} else {
	send_user "This error is expected, no worries\n"
}

#
# Post-processing
#
send "exit\r"
expect {
	-re "error.*Exit 1" {
		send_user "This error is expected, no worries\n"
		exp_continue
	}
	timeout {
		send_user "\nFAILURE: srun not responding\n"
		slow_kill $salloc_pid
		exit 1
	}
	eof {
		wait
	}
}

if {$exit_code == 0} {
	send_user "\nSUCCESS\n"
}
exit $exit_code
