Differences

This shows you the differences between two versions of the page.

--- tools:actools:cmaq_reduced [2017/02/01 09:45]
ctena
+++ tools:actools:cmaq_reduced [2017/02/14 15:41]
ctena [8h_max]
@@ Line 111: / Line 111: @@
 zf,ZF,METCRO3D_<domain>,1,m,1h
 </code>
+In the first line it has the header that specifies the content of the following lines.
+<code>
+var,var_cmaq,filename,factor,unit,timeint_stat
+</code>
+  * var -> Name of the output variable following the conventions.
+  * var_cmaq -> Variable or List of variables of the CMAQ file to reduce.
+  * filename -> CMAQ file to reduce.
+  * factor -> Conversion factor to store the value in the correct units.
+  * unit -> Units to save the outputs.
+  * timeint_stat -> Type (or list of types) of the reduceds to do. the Reduced types will be explained in the REDUCED TYPES SECTION.
+===== Reduced types =====
+All the output types are saved following the NetCDF conventions with the lat lon localization and the datetime.
+==== 1h ====
+This output type is directly the hourly values.
+The output type will have the same time steps of the input.
+==== 8h_max ====
+That's the most complex reduced type.
+The result is one value for each cell and each day.
+This result is the maximum daily 8 hour mean.
+DIRECTIVE 2008/50/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
+Maximum daily eight-hour mean: the maximum daily eight-hour mean concentration shall be selected by examining eight-hour running averages, calculated from hourly data and updated each hour. Each eight -hour average so calculated shall be assigned to the day on which it ends. i.e. the first calculation period for any one day will be the period from 17:00 on the previous day to 01:00 on that day; the last calculation  period for any one day will be the period from 16:00 to 24:00 on the day.
+==== day_mean ====
+The mean of each day
+==== day_max ====
+The maximum value of each day

User Tools

Site Tools

Differences

Page Tools