Newer
Older
2016-08-01 Uwe Schulzweida
* grb write: added support for projection CDI_PROJ_RLL
* grb, grb2, ieg read: added support for projection CDI_PROJ_RLL
2016-07-30 Uwe Schulzweida
* ieg write: added support for projection CDI_PROJ_RLL
2016-07-28 Uwe Schulzweida
* iegWriteVarSliceDP: does not work (bug fix)
2016-07-02 Uwe Schulzweida
* streamOpenAppend: call to gribContainersNew() missing (bug fix) [Bug #6944]
2016-06-17 Uwe Schulzweida
* netCDF4: added support for attribute type NC_BYTE, NC_UBYTE, NC_USHORT and NC_UINT
2016-06-10 Uwe Schulzweida
* Version 1.7.2 released
2016-05-24 Uwe Schulzweida
* GRIB_API: added support for Gaussian reduced grids
2016-05-23 Uwe Schulzweida
* zaxisTypeToGrib2ltype: added ZAXIS_DEPTH_BELOW_LAND (bug fix)
2016-05-16 Uwe Schulzweida
* Seg fault in VCT with GRIB1 (introduced in 1.7.1) [Bug #6780]
Uwe Schulzweida
committed
2016-04-29 Uwe Schulzweida
* gribapiDefLevel: replace grib_set_double(gh, "level", level) by grib2DefLevel() [Bug #6732]
2016-04-27 Uwe Schulzweida
* cdfReadVarSlice: fix bug with DATATYPE_UINT8
2016-04-04 Uwe Schulzweida
* GRIB1/GRIB_API (accumulation) encoding error [Bug #6638]
2016-03-15 Uwe Schulzweida
* GRIB1 output with forecast times > 255 [Bug: #6600]
2016-03-06 Uwe Schulzweida
* NetCDF: added support for dimension name of z axis
2016-03-01 Uwe Schulzweida
* NetCDF: added support for dimension name of x and y axis
* Version 1.7.1 released
* using CGRIBEX library version 1.7.4
2016-02-05 Uwe Schulzweida
* timeval2vtime: set vtime=rtime if timevalue=0 [Bug: #6496]
2015-12-23 Uwe Schulzweida
* ZAXIS_HEIGHT: added support for units cm, dm and km
Uwe Schulzweida
committed
2015-12-19 Uwe Schulzweida
* gribapiDecode internal problem when processing 1x1 GRIB2 data with JPEG compression [Bug #6402]
2015-12-10 Uwe Schulzweida
* gridGenYvals: bug fix [Bug #6373]
2015-11-25 Uwe Schulzweida
* cdfDefXaxis/cdfDefXaxis: generate bounds for CDI_cmor_mode
2015-11-23 Nathanael Huebbe
* replaced the vlist locked flag by two other flags
2015-11-17 Uwe Schulzweida
* cdfCopyRecord: use MEMTYPE_FLOAT for DATATYPE_FLT32
Uwe Schulzweida
committed
2015-11-04 Uwe Schulzweida
* tableRead: name is not interpreted correctly (bug introduced in 1.7.0 #3933)
Uwe Schulzweida
committed
* using CGRIBEX library version 1.7.3
* using EXSE library version 1.4.0
Uwe Schulzweida
committed
2015-10-06 Uwe Schulzweida
* netcdf: added support for 2D generic grids which share one dimension (bug fix)
Uwe Schulzweida
committed
2015-09-15 Uwe Schulzweida
* gridCompare: check only UUID of unstructured grids if coordinates are missing
Uwe Schulzweida
committed
2015-09-10 Uwe Schulzweida
* GRIB rotated grids: invert angle of rotation (north to south pole) (bug fix)
2015-08-18 Uwe Schulzweida
* added support for netCDF Scalar Coordinate Variables
2015-08-11 Uwe Schulzweida
* bug fix for scanning the WRF time axis
2015-08-07 Uwe Schulzweida
* cdiStreamSetupVlist: added call to vlist_unlock(vlistID) (bug fix)
2015-06-16 Uwe Schulzweida
* merge changes from branches/cdi-tiles [from Florian Prill]
* added rubyVersionCheck.patch [from Nathanael Huebbe]
2015-06-02 Uwe Schulzweida
* gribapiDefParam: check range of parameter number
2015-05-28 Uwe Schulzweida
* dmemory: added env. MEMORY_INFO
2015-04-28 Uwe Schulzweida
* Version 1.6.9 released
* using CGRIBEX library version 1.7.2
2015-04-22 Uwe Schulzweida
* gribapiDefParam: use cfName to find parameter ids
* cgribex rotated grids: added support for parameter >angle< (bug fix)
* netcdf rotated grids: bug fix for negative angles
2015-04-21 Uwe Schulzweida
* dmemory.c: merge changes from branches/cdi-tilesAndFileDrivenInput
2015-03-30 Uwe Schulzweida
* gribapiDefLevel: use function grib2DefLevel() to write grib2 levels
2015-03-29 Uwe Schulzweida
* vlistMerge: compare size of grids (bug fix)
2015-03-27 Uwe Schulzweida
* gribapiScanTimestep1: fixed bug from previous merge of branches/cdi_fileDrivenInput (GRIB2 read failed)
2015-03-26 Uwe Schulzweida
* merged changes from branches/cdi_fileDrivenInput
2015-03-26 Uwe Schulzweida
2015-02-18 Uwe Schulzweida
* cdiDecodeTimevalue: fix rounding error for negativ timevalue
2015-02-12 Uwe Schulzweida
* scan netcdf time units attribute (bug fix)
2015-02-02 Uwe Schulzweida
* gribapiDefDateTimeRel: forecastTime [Bug #5435]
* cdfCopyRecord: incorrect checksum for freed object [Bug #5461]
2015-01-16 Uwe Schulzweida
* cdiDecodeTimevalue: round seconds for TUNIT_SECOND (bug fix)
Uwe Schulzweida
committed
2015-01-12 Uwe Schulzweida
* cdfCreateRecords: call cdfCreateRecords(streamptr, 1) if not done before (bug fix)
Uwe Schulzweida
committed
2015-01-09 Uwe Schulzweida
* cdi_create_records: the contents of unused records must not be interpreted (bug fix) [patch from Nathanael Huebbe]
2014-12-19 Uwe Schulzweida
* netCDF: renamed coordinate bounds dimension from nv2 to bnds
* netCDF: renamed time bounds dimension from nb2 to bnds
2014-12-11 Uwe Schulzweida
* Version 1.6.7 released
2014-12-10 Uwe Schulzweida
* vlistDefAttXXX: limit length of attribute name to CDI_MAX_NAME
2014-12-05 Uwe Schulzweida
Uwe Schulzweida
committed
* netCDF absolute time axis with units month: change day from 00 to 01
* netCDF absolute time axis with units year: change month/day from 0000 to 0101
2014-12-03 Uwe Schulzweida
* gribapi: time dependent metadata [Feature #4720]
2014-12-01 Uwe Schulzweida
* GRIB_API output does not work (bug fix)
2014-11-27 Uwe Schulzweida
* Version 1.6.6 released
2014-11-20 Uwe Schulzweida
* table::decodeForm1: missing longname results in Abort trap (bug fix)
2014-11-14 Uwe Schulzweida
* cdfCopyRecord: removed limit for datasize
2014-11-12 Uwe Schulzweida
* Version 1.6.5.2 released
2014-11-12 Uwe Schulzweida
* transpose2dArrayXX: wrong result (bug fix)
2014-11-08 Uwe Schulzweida
* cgribexScanTimestep1: set flag to 0 in call to cgribexVarCompare() (bug fix)
2014-11-05 Uwe Schulzweida
* IEG: added support for coordinate scale factor [patch from Kevin Sieck]
2014-10-31 Uwe Schulzweida
* Version 1.6.5.1 released
* netCDF: call set_validrangeDP() in cdfReadVar() (bug fix)
* netCDF: call cdfDoInputDataTransformation() if have missvals (bug fix)
2014-10-24 Uwe Schulzweida
* gridCompare: change limit of difference from 0.001 to 0.0015
2014-10-23 Nathanael Huebbe
* resource_handle: optimize error messages
* Version 1.6.5 released
* using CGRIBEX library version 1.6.5
* vlistDefVarXXXKey: check validity of vlist object [Feature #4720]
2014-10-13 Uwe Schulzweida
* added support for grib_api key typeOfSecondFixedSurface
2014-10-10 Uwe Schulzweida
* netCDF: added support 1D level variables
2014-10-07 Uwe Schulzweida
* read netCDF: cache time variable
2014-08-21 Uwe Schulzweida
* reshGetElem: call show_stackframe() to print a backtrace
2014-08-20 Uwe Schulzweida
* added CDI function gribapiLibraryVersion(major_version, minor_version, revision_version) [Feature #5043]
Uwe Schulzweida
committed
2014-08-15 Uwe Schulzweida
* gridCompare: check position parameter of unstructured grids only if gridnumber > 0
2014-08-13 Uwe Schulzweida
* cgribex: use timerange indicator to identify different variables
* gribapi: use timerange indicator to identify different variables
* listDestroy(): set resHListSize=0 [Bug #5058]
* NetCDF: Reading uuidOfVGrid [Bug #5046]
2014-08-04 Nathanael Huebbe
* NetCDF single precision input
2014-07-31 Uwe Schulzweida
* netCDF4: added support for xtype NC_STRING
2014-07-25 Uwe Schulzweida
* vlistInqAtt: return -1 if attnum is out of range
* vlistInqAttXXX: return -1 if attname not found
Uwe Schulzweida
committed
2014-07-24 Uwe Schulzweida
* gribapiEncode: update additional keys defined with vlistDefVarXXXKey() [Feature #4720]
Uwe Schulzweida
committed
2014-07-22 Uwe Schulzweida
Uwe Schulzweida
committed
* added vlistDefVarProductDefinitionTemplate() to define GRIB2 Product Definition Template Number [Feature #4694]
Uwe Schulzweida
committed
2014-07-21 Uwe Schulzweida
Uwe Schulzweida
committed
* gribapiDefSteptype: changed proDefTempNum to 1/11 for typeOfGeneratingProcess=4
* file write: set default to NONBLOCK if available
2014-07-18 Uwe Schulzweida
* added function streamReadVarF() and streamReadVarSliceF()
* streamWriteVarF, streamWriteVarSliceF: added support for GRIB1 (cgribex)
2014-07-17 Uwe Schulzweida
* grib2: activate jpeg support in combination with masks (missing values)
2014-07-01 Uwe Schulzweida
* netCDF: skip coordinate variables with more than 2 dimension
Uwe Schulzweida
committed
2014-06-16 Uwe Schulzweida
* added support for env var CDI_NETCDF_HDR_PAD (pad netCDF header with nbr bytes)
2014-06-06 Uwe Schulzweida
* Loss of coordinates attribute when merging files [Bug #4880]
2014-06-04 Uwe Schulzweida
* netCDF: do not defined attribute calendar and units for time bounds [report: Stephanie Legutke]
2014-05-19 Uwe Schulzweida
* netCDF: added support for opendap files by https
2014-05-16 Uwe Schulzweida
* netCDF: added write support of lat/lon coordinates without dimension
2014-05-15 Uwe Schulzweida
* cgribexGetGrid: correct last lon when last lon < first lon
2014-05-14 Uwe Schulzweida
* netCDF: skip unsupported dimension (no xyzt)
2014-05-13 Uwe Schulzweida
* netCDF: added read support for lon/lat coordinates without dimension
2014-05-12 Uwe Schulzweida
* gridCreate: removed default stdname and units for GENERIC grids
2014-05-11 Uwe Schulzweida
* added support for GRIB_API key cfName
2014-04-10 Uwe Schulzweida
* varscan::cmpparam: apply patch from Thomas Jahns
Uwe Schulzweida
committed
2014-03-24 Uwe Schulzweida
* configure --with-netCDF: set default=no
Uwe Schulzweida
committed
* gribapiDefDateTimeRel: set vdate to rdate for time invariant fields [Bug #4641]
2014-03-20 Uwe Schulzweida
* netCDF4: changed default file name suffix from nc4 to nc
* GRIB2: changed default file name suffix fromg g2 to grb
2014-03-10 Uwe Schulzweida
Uwe Schulzweida
committed
* netCDF4 classic: existing files are converted to netCDF4 - classic flag is lost (bug fix)
* cgribexDefParam: check validity of parameter number
2014-03-04 Uwe Schulzweida
* zaxisCreate: check number of levels
2014-02-27 Uwe Schulzweida
* added taxisDefFdate() and taxisDefFtime() - Define the forecast reference date
* added taxisInqFdate() and taxisInqFtime() - Get the forecast reference date
* grib_api: debug patch from Florian and Daniel
* grib2: set stepUnits after changing the template [Bug #4500]
* Version 1.6.3 released
* using CGRIBEX library version 1.6.3
* gridInqUUID: changed return value from char* to void
* zaxisInqUUID: changed return value from char* to void
* stream_cdf: added cdfDefZaxisUUID() [patch: Florian Prill]
Uwe Schulzweida
committed
Uwe Schulzweida
committed
* stream_cdf::define_all_grids: bug fix for unstructured grids and an additional undefined dimension [report: Florian Prill]
Uwe Schulzweida
committed
* streamInqGinfo: added support for GRIB files > 2GB
Uwe Schulzweida
committed
* streamOpenA, streamOpen: parameter recordBufIsToBeCreated missing in call to cdiStreamOpenDefaultDelegate() (bug fix)
Uwe Schulzweida
committed
* streamOpenA: removed line "streamptr->record = record"; record is allocated in cdiStreamOpenDefaultDelegate() (bug fix)
Uwe Schulzweida
committed
* Merged branch cdi-pio to trunk cdi
Uwe Schulzweida
committed
* Version 1.6.2 released
* using CGRIBEX library version 1.6.2
Uwe Schulzweida
committed
* Added CDI function zaxisDefNlevRef() and zaxisInqNlevRef() [Feature #4117]
* Merged branch cdi-pio to trunk cdi
* Added support for netCDF CF time attribute: climatology [Feature #4092]
Uwe Schulzweida
committed
* stream_cdf::isLatAxis() and isLonAxis(): added support for stdname latitude and longitude
* added support for GRIB2 key typeOfGeneratingProcess
* added interface function vlistDefVarTypeOfGeneratingProcess() and vlistInqVarTypeOfGeneratingProcess()
* listSizeExtend: initialize ops, val and status (Bug #3994)
* stream_cdf::isLonAxis/isLatAxis: case sensitive units check
* streamCopyRecord: allow mixed netCDF file types
* gribapiDefLevel: Bug fix for ZAXIS_REFERENCE (Bug #3747)
* netCDF: read reference of an unstructured grid
* netCDF: write reference of an unstructured grid
* made gridtype GRID_REFERENCE part of GRID_UNSTRUCTED
* removed gridtype GRID_REFERENCE
Uwe Schulzweida
committed
* GRIB2: added support for level type Lake Bottom (grib level type 162)
* GRIB2: added support for level type Bottom Of Sediment Layer (grib level type 163)
* GRIB2: added support for level type Bottom Of Thermally Active Sediment Layer (grib level type 164)
* GRIB2: added support for level type Bottom Of Sediment Layer Penetrated By Thermal Wave (grib level type 165)
* GRIB2: added support for level type Mixing Layer (grib level type 166)
Uwe Schulzweida
committed
* gribapiGetValidityDateTime: check timeRangeIndicator for editionNumber =1 (bug fix)
* netCDF: added support for zaxis attribute: positive
* Version 1.6.1.1 released (merged branch cdi-pio to trunk cdi)
Uwe Schulzweida
committed
* netCDF: wrong result if type of data and type of attribute valid_range differ [Bug #3727]
Uwe Schulzweida
committed
* gribapiDefLevel::ZAXIS_DEPTH_BELOW_LAND: apply scalefactor to dlevel2 (bug fix) [report: Harald Anlauf]
* streamFilesuffix: changed default filename suffix for FILETYPE_NC2 to nc
Uwe Schulzweida
committed
Uwe Schulzweida
committed
* Version 1.6.1 released
Uwe Schulzweida
committed
* using CGRIBEX library version 1.6.1
Uwe Schulzweida
committed
* file.c: added env. var. FILE_TYPE_WRITE (1:open; 2:fopen)
* GRIB2: added support for snow level (level type 114)
* GRIB2: added support for layers with zaxis type ZAXIS_PRESSURE
* cdfDefVarMissval: changed xtype from NC_BYTE to NC_INT for missvals > 127 (workaround for a netCDF bug)
* use 'number_of_grid_used' only for undefined grid types
Uwe Schulzweida
committed
* added patch from Florian Prill: Lesen von 'number_of_grid_used', GRID_REFERENCE (bug fix)
* netCDF: skip 4D variables without time dimension (bug fix)
* GRIB2: added support for pressure levels with 3 fractional digits
* gribapiGetEndStep: use stepUnits for timeunits2
* grib2GetLevel: set level bounds if 0 < leveltype2 < 255
* netCDF: missing_value attribute removed [Bug #3592]
Uwe Schulzweida
committed
* added CDI function cdiHaveFiletype() to check whether a filetype is available
Uwe Schulzweida
committed
* added patch from Florian Prill: Lesen von "Nicht-Standard" GRIB-Keys (bug fix)
Uwe Schulzweida
committed
* added patch from Florian Prill: Lesen von "Nicht-Standard" GRIB-Keys
* institutInq: check contents of name and longname (bug fix) [Bug #3419]
Uwe Schulzweida
committed
Uwe Schulzweida
committed
* cfortran.h::kill_trailing: wrong result with gcc -O3, use prama for -O2 (bug fix) [report: Luis Kornblueh]
Uwe Schulzweida
committed
* vlistXXXAttTxt: use cdi fortran datatype CBUF (char *) for the last argument (bug fix) [report: Luis Kornblueh]
Uwe Schulzweida
committed
* gridXXXUUID: use cdi fortran datatype CBUF (char *) for the last argument (bug fix) [Bug #3424]
* zaxisXXXUUID: use cdi fortran datatype CBUF (char *) for the last argument (bug fix)
Uwe Schulzweida
committed
* stream_gribapi: replaced function getLevelFactor() [Bug #3446]
* added function vlistDefVarExtra() and vlistInqVarExtra()
Uwe Schulzweida
committed
* vlistDefVarDatatype: changed default missing values of signed integers to -TYPE_MAX
* cdi.h: changed >char*< to >char *< (bug fix for fortran interface)
* make_cdilib: changed position of error.c and error.h (bug fix)
Uwe Schulzweida
committed
* using CGRIBEX library version 1.6.0
* Read arbitrary GRIB keys [Feature #3267]
* GRIB: added support for time step unit: seconds [Bug #3352]
Uwe Schulzweida
committed
* Added support for level type CLOUD_BASE, CLOUD_TOP and ISOTHERM_ZERO [Feature #3247]
Uwe Schulzweida
committed
* stream_gribapi: changed units for level type GRIB2_LTYPE_LANDDEPTH to m (internally mm) [Bug #3287]
Uwe Schulzweida
committed
* gribapiGetGrid: get gridDescriptionFile with grib_get_string() instead of grib_get_bytes() (bug fix)
Uwe Schulzweida
committed
* stream_gribapi: added support for local table shortName.def [Bug #3343]
* vtime2timeval: check validity of month
Uwe Schulzweida
committed
Uwe Schulzweida
committed
* cdfDefGrid: bug fix for generic grids with nx or ny > 0
Uwe Schulzweida
committed
* netCDF: ignore the attribute valid_min/valid_max, if the data type is inconsistent
Uwe Schulzweida
committed
Uwe Schulzweida
committed
* Added function vlistDefVarIntKey() and vlistDefVarDblKey() to set GRIB_API Key/Value pairs
* cgribexGetTsteptype: changed default to TSTEP_INSTANT [Bug #3211]
Uwe Schulzweida
committed
* netCDF: ignore the attribute valid_range, if the data type is inconsistent
* netCDF: added env IGNORE_VALID_RANGE to ignore the attribute valid_range
Uwe Schulzweida
committed
Uwe Schulzweida
committed
* stream_cgribex::cgribexGetGrid: add 360 to lastLon, if lastlon <firstLon [Bug #3189]
Uwe Schulzweida
committed
* netCDF: check position of time dimension
* global netCDF attribute "source" missing (bug fix)
* reshGetValue: added caller function name to error message
* Version 1.5.9 released
* removed unused function streamDefineTaxis()
* fix warning in streamDefTimestep() for stream with constant fields only
* added cdfGridCompress() to compress coordinates
* added vlistDefVarChunkType() and vlistInqVarChunkType()
* vlistCopyFlag: added support for level bounds
* netCDF: added support for time axis name and long_name
Uwe Schulzweida
committed
* stream_cdf::define_all_vars: added txt attributes to vlistDefAttTxt() without trailing 0 [Bug #3004]
* file.c: added support for unbuffered write
Uwe Schulzweida
committed
* cdfReadVarSliceDP: store DATATYPE_FLT32 in a float array and convert it to double (speedup 2x)
* cdfInqTimestep: added check for timevalue = NC_FILL_DOUBLE
* app/cdi: added optional compression level -z zip[_1-9]
* file.c::file_initialize: added support for env GRIB_API_IO_BUFFER_SIZE [request: Florian Prill]
* gridGenXvals/gridGenYvals: removed changes from 1.5.8 (bug fix)
* cgribexGetGrid: bug fix for xinc/yinc recomputation
* grib2: correct endStep if timeunits is not equal stepUnits (bug fix)
* cgribexGetGrid: bug fix for yinc for odd ysize
* Version 1.5.8 released
* using CGRIBEX library version 1.5.5
* stream_cgribex.c: do not check fraction of xinc/yinc" stream_cgribex.c
* gridGenXvals/gridGenYvals: recheck xinc/yinc if (first+(size-1)*inc) > last
Uwe Schulzweida
committed
* stream_gribapi.c::gribapiScanTimestep: changed GRIBAPI_MISSVAL to cdiDefaultMissval
* vlistCopyFlag: copy ensdata (bug fix) [report: Jaison Ambadan]
* grib2: changed packingType from grid_jpeg to grid_simple if nmiss > 0 (bug fix)
* grib2: added stepType support for absolute time axis
* pio.h remove line 'typedef int MPI_Comm;' [Bug #2882]
* vlistInqZaxis: use zaxisGetIndexList() to get global zaxisIDs (bug fix)
* listSizeExtend: init ops, val and status
* listInitialize: set mutex type to PTHREAD_MUTEX_RECURSIVE
Uwe Schulzweida
committed
* cdfInqContents: make ncid local to varid
Uwe Schulzweida
committed
* cdfInqContents: group reading of global attribute to read_global_attributtes()
* cdfInqContents: set ntsteps to 0 if no data variable found
* netCDF: set 1D arrays to coordinate variables if axis attribute is available
Uwe Schulzweida
committed
* unreduced: compute nlon and nvalues from rowlon[] (bug fix)
* cgribexEncode: initialize the first 256 entries of isec1 to zero
* app/cdi: changed output format of option -s (sinfo)
* model.c::modelInq*: check instID != UNDEFID (buf fix)
* institution.c::insitutInq*: check instID != UNDEFID (buf fix)
* Merge of branch cdo-pio into trunk cdi
* using EXSE library version 1.3.1
* Version 1.5.6 released
* using CGRIBEX library version 1.5.3
* added call to cdiInitialize() in all streamOpen functions (bug fix)
* added support for environment variable NC_CHUNKSIZEHINT [Feature #2142]
Uwe Schulzweida
committed
* grib scan timestep: changed Error() to Warning() for inconsistent timesteps
* stream_cdf::define_all_grids: modify check for same x and y varids
* cdfInqContents: set all undefined 1D variables to data variables [request: Florian Prill]
Uwe Schulzweida
committed
* cdf_write_var_data: bug fix for unscaled uint8, int8, int16, int32 (bug introduced in 1.5.5)
Uwe Schulzweida
committed
* grib_api: use key significanceOfReferenceTime only for GRIB2
* added support for grib_api key stepType [request: Drte Liermann]
* changed TIME_CONSTANT and TIME_VARIABLE to TSTEP_CONSTANT and TSTEP_XXX
* renamed vlistInqVarTime() vlistInqVarTsteptype()
* stream_gribapi: added support for level type HYBRID_HALF [request: Drte Liermann]
* stream_cdf::cdfDefUnstructured: fixed memory bug [ICON - Bug #2398]
* Version 1.5.5 released
* using CGRIBEX library version 1.5.2
* cdi.h: added vlistDefVarTime() [request: Florian Prill]
* stream_gribapi: bug fix for validation date and time
* stream_cdf::define_all_grids: changed scale_add() parameter from x to y (bug fix)
* added support for ZAXIS_DEPTH_BELOW_LAND units "mm", "cm", "dm" and "m"
Uwe Schulzweida
committed
* added single precision support: streamWriteVarF, streamWriteVarSliceF
Uwe Schulzweida
committed
* stream_cdf::cdfDefDatatype: bug fix for DATATYPE_UINT8
* stream_cdf::cdfDefCurvilinear: bug fix for CLM s,u,v grids [report: Hans-Jrgen Panitz]
Uwe Schulzweida
committed
* Version 1.5.4 released
Uwe Schulzweida
committed
* added support for GRIB2 packing type grid_ieee
* added suppport for GRIB2 level type 150
* verify_coordinate_vars: bug fix in check for units = "1" [report: Katharina Six]
Uwe Schulzweida
committed
* added support for netCDF attributes scale_factor and add_offset for lon/lat coordinates
* added support for GRIB gaussian grid parameter NumPar on non global grids [Bug #1711]
* added interface functions gridDefNP/gridInqNP (number of parallels between a pole and the equator)
* added support for GRIB1_LTYPE_SIGMA_LAYER
* added support for netcdf attribute valid_min/valid_max [request: Etienne Tourigny]
* cdilib.c::defineAttributes: bug fix atttxt [report: Florian Prill]
* added support for netcdf attribute valid_range [request: Etienne Tourigny]
* using CGRIBEX library version 1.5.1
* zaxisCompare: set epsilon from 0 to 1e-9 [request: Felicia Brisc]
Uwe Schulzweida
committed
* added level type ZAXIS_TOA, ZAXIS_SEA_BOTTOM, ZAXIS_ATMOSPHERE [request: Drte Liermann]
* stream_cdf::cdfInqContents: check units of hybrid levels
* varAddRecord: used max number of bit_per_value for 3D GRIB data
* gribapiDefGrid: added parameter jScansPositively [report: Juan Jose Tasso]
* deflate compression with netCDF4 doesn't work (bug fix) [report: Geert Jan van Oldenborgh]
* correct netCDF dimension order of unstructured grids (bug fix) [report: Ralf Mueller]
* streamFilesuffix: added suffix for filetype NC4C (bug fix)
* scanVarAttributes: check size of axis attribute (bug fix) [report: David Huard]
* Added flexible XYZ dimension ordering for netCDF [request: Andy Aschwanden]
* added interface function vlistDefVarXYZ to set the dimension order
* added interface function zaxisInqVct to read the VCT
* netcdf input: correct wrong formatted time units [request: Harald Anlauf]
* netcdf: added support for GRID_FOURIER (fourier coefficients)
* vlistCopy: allocate and copy varsAllocated elements (bug fix) [report: Ralf Mueller]
* vtime2timeval: do not round result (bug fix for TUNIT_YEAR) [report: Andy Aschwanden]
* CDI: changed compression type from Ztype to CompType
* CDI: changed compression level from Zlevel to CompLevel [report: Thomas Jahns]
* gridGenYvals: changed delta eps to 0.002 for gaussian grids [report: John Lillibridge]
* ruby/python interface: changed GRID_CELL to GRID_UNSTRUCTURED [report: Tim Cera]
* grid::compareXYvals: bug fix for generic grids [report: Felicia Brisc]
* Added attribute standard_name to netCDF time var [request: Karin Meier-Fleischer]
* Added attribute standard_name to netCDF zaxes [request: Karin Meier-Fleischer]
* Added attribute positive to netCDF zaxes [request: Karin Meier-Fleischer]
* Added support for FILETYPE_NC4C (netcdf4 classic)
* netcdf: Skiped time dependent variables if number of time steps is zero
* using CGRIBEX library version 1.5.0
* Version 1.5.0 released
* stream_cdf: added support for GRIB2 parameter identifier
* vlistDestroy: fix memory leak
* added netCDF support for level bounds
* added grid type GRID_REFERENCE
* changed grid name GRID_CELL to GRID_UNSTRUCTURED
* added support to encode/decode GRIB1 with GRIB_API
* using CGRIBEX library version 1.4.7
* Version 1.4.7 released
* cdfDefZaxis: changed hybrid level type from int to float
* taxisCopyTimestep: added mutex_lock
* cgribexAddRecord: correct xinc/yinc if necessary [report: Anders Ullerstig]
* cdfDefVCT: remove var mlev and ilev (bug fix) [report: Torsten Weber]
* cdfOpenFile: create netCDF4 files without NC_CLASSIC_MODEL
* cdfOpenFile: switch off checking of netCDF4 format (read)
* cdfDefTime: bug fix for time units 3HOURS, 6HOURS, 12HOURS
* using CGRIBEX library version 1.4.6
* Version 1.4.6 released
* GRIB1: use packing only for non constant fields [request: Luis Kornblueh]
* varDefZtype: bug fix [report: Stephanie Legutke]
* use libtool 2.2.10 for compiling + linking
* create shared + static library with PIC support by default
(positions independant code)
* build CDI configuration file: cdi.settings
* check axis attribute (bug fix) [report: Cui Chen]
* vlistCopyFlag: copy zaxis meta data
* Added support for attribute type int16 and float32 [Request: Don Murray]
* Version 1.4.5.2 released [request: Luis Kornblueh]
* added ECHAM6 GRIB1 code table
* cdfInqContents: fixed out of bounds access to attstring [report: Heiner Widmann]
* cdfInqContents: fix problem of wrong stdname for grid description [report: Michael Boettinger]
* Version 1.4.5.1 released
* GRIB1 decode: Correct ZeroShiftError of simple packed spherical harmonics
* cdfInqContents: use complex packing for spectral data [report: Edi Kirk]
* using CGRIBEX library version 1.4.5.1 (szip bug fix for 24 bit data)
* using CGRIBEX library version 1.4.5
* Version 1.4.5 released
* stream_history: added NC4 support [report: Etienne Tourigny]
* cdfDefXYaxis: check also dimnames (bug fix) [report: Mikhail Itkin]
* stream_cdf: added support for uppercase attributes [request: Patrick Brockmann]
* gridGenYvals: bug fix for nlat > 4096 [report: Thomas Bergmann]
* gaussgrid: define M_SQRT2 [report: alastair.mckinstry@ichec.ie]
Uwe Schulzweida
committed
* MAX_STREAMS: changed fixed size of 4096 to dynamic range of 1024 - 65536
* MAX_VLISTS: changed fixed size of 4096 to dynamic range of 1024 - 65536
* MAX_TAXES: changed fixed size of 4096 to dynamic range of 1024 - 65536
Uwe Schulzweida
committed
* cgribexDefTime: bug fix for GRIB time range 10
* added support for GRIB time units 3hours and 6hours [request: Jaison-Thomas Ambadan]
* vlistMerge: added support to merge levels
* cgribexDefTime: bug fix for timerange=3 [report: Veronika Gayler]
* using CGRIBEX library version 1.4.4
* vlistCat: correct temporary parameter numbers
* added support for non integer time units MONTH
* gauaw: bug fix for allocation of zfnlat for odd number of nlat
* cdfDefGrid: check whether the variable or dimension name already exist
* grid.c: replace for loops by memcpy (speed up)
* implementation of gridDestroy
* Version 1.4.3 released
* grib1: bug fix for description of gaussian reduced grids [report: Klaus Wyser]
* gauaw: new code to calculate gaussian grid [Luis Kornblueh]
* rotated grids: correct standard name [report: Michael Boettinger]
* cgribexDefTime: bug fix for timerange = -1
* added support for encoding of complex packed spectral data in GRIB1
* added function gridInqComplexPacking/gridDefComplexPacking
* added support for timerange 1,2,3,4,5 (GRIB1)
* cdfDefVar: define add_offset and scale_factor always together
* added optional sorting of parameters
* added support for cosmo GRIB parameter tables
* added missing value support for cosmo GRIB files
* using CGRIBEX library version 1.4.2 (large record support)
* using EXSE library version 1.2.0 (complex numbers with EXTRA)
* fileRead: check result of fread
* binReadF77Block: check result of fileRead
* Version 1.4.1 released
* streamSync: check that vlist has variables to sync [report: Martin Schultz]
* cdfDefVar: define attribute _FillValue if missval was defined (speed up)
* allocate gribHandle for every grid/zaxis combination (speed up for writing GRIB2)
* cdfInqContents: bug fix for GRID_CELL with levels [report: Stephan Lorenz]
* using GRIB library version 1.4.1
* added function vlistDefVarParam/vlistInqVarParam
* Added ruby and python interfaces
* cdi.h: added '_vec' to all int and double vector arguments
* set units to "Pa" if changing zaxis to "pressure" (bug fix) [report: Chao Li]
* Added Fortran Interface via iso_c_bindings facility of F2003
--enable-iso-c-interface
* added support for GRIB2 JPEG compression
* grbWriteVar: bug fix
* Version 1.4.0.2 released
* cdfDefXaxis: bug fix for multi generic grids [report: Uwe Mikolajewicz]
* streamCopyRecord: check byteorder (bug fix) [report: Claas Teichmann]
* IEG format: bug fix for lonlat grids [report: Philip Lorenz]
* cdtInqContents: check attribute type
* added GRIB2 support (testversion) via grib_api(1.8.0)
* changed C compiler to ANSI C99
* changed time format from hhmm to hhmmss
* changed encode/decode_time to seconds
* ieg: added support for Gaussian grids [request: Ralf Podzun]
* added support for netCDF timeseries without grid
* added support for netCDF timeseries with only one grid axis
* gribDefLevel: bug fix for pressure level units millibar
* julday_add_seconds: bug fix for adjusting negative seconds
* stream_cdf:cdfReadVarSliceDP: bug fix for swapxy
* netCDF: reduced number of nc_enddef
* added env CDI_SORTNAME to sort netCDF names
* added support for rotated grids on south pole [request: Beate Geyer]
* timeval2vtime: bug fix for timeunit TUNIT_MONTH
* added support for NaN in DBL_IS_EQUAL
* added support for GRID type LCC2 (LCC PROJ.4 version)
* added support for TUNIT_QUARTER (15 minutes)
* use env GRIB_INVENTORY_MODE=timestep to skip double entries
* grbDefTime: define tunit also for absolute time [report: Pruek Pongprueksa]
* set default calendar with env CDI_DEFAULT_CALENDAR
* change default calendar to CALENDAR_PROLEPTIC
* grid_check_cyclic: support for curvilinear grids without bounds
* cdfInqContents: check dimension of curvilinear grids
* streamOpenAppen: set ncmode to 2 (bug fix)
* replaced strncpy/strncmp by memcpy/memcmp
* add support for GRID type SINUSOIDAL
* add support of GRIB level type MEANSEA
* gridCreate: CF stdname and units for curvilinear grids [report: Stephanie Legutke]
* cdf_create: don't set chunksizehint (bug fix) [report: Luis Kornblueh]
* change vlistFlagVar to vlistMergedVar
* set default missval of INT8/16/32 to SCHAR_MIN/SHRT_MIN/INT_MIN
* move grid_lcc, grid_gme, grid_rot code to CDO
* move gridToCurvilinear and gridToCell code to CDO
* cdf_inq_contents: check zaxis type "depth_blow_sea/land" (bug fix)
* Version 1.3.0 released
* add new taxis functions: taxisXXXVdateBounds and taxisXXXVtimeBounds
* cdfReadVarSliceDP: add swapxy support
* stream_cdf: check var and axis names
* cdfInqContents: support of grid stdname 'longitude' and 'latitude'
* lambert grid: support of projection flag (bug fix) [report: Andrew Digby]
* streamFilesuffix: bug fix for IEG [report: Class Teichmann]
* gridCompare: bug fix for lonlat grids and type = 1 (cdfInqContents)
* netcdf: support of timeunit 'year'
* add support for netCDF4 classic with deflate option
* streamClose: use taxisDestroy to release memory
* cdfInqContents: skip time variable with type = NC_CHAR
* grbDefGrid: add warning for curvilinear grids
* grbDefGrid: set increment for zonal means [request: Helmut P. Frank]
* ptaxisCopy: don't overwrite item 'self' (bug fix)
* DBL_IS_EQUAL: check NaN with isnan
* using GRIB library version 1.1.1
* configure: --with-szlib=<directory>
* configure: check stat.st_blksize [report: Klaus Wyser]
* fileOpen: add O_BINARY if available [report: Klaus Wyser]
Uwe Schulzweida
committed
* taxis.c: add support for non integer timevalues (TUNIT_MONTH/CALENDAR_360DAYS)
* stream_cdf: add ICON grid support
* stream_srv: add support for GRID_CELL (bug fix)
* cdfInqContents: support of lon/lat units radian
* cdfInqContents: bug fix for gridtype cell
* cdfInqContents: bug fix for inconsistent curvilinear grid [report: Holger Goettel]
* cdfInqContents: bug fix for unsupported grids (dims > 2) [report: Wolfgang Langhans]
* cdfInqContents: check type of _FillValue
* gridCompare: compare grid.yinc only if set
* vlist_att.find_att: allocate attribute only if size > 0
* grid_gme.c: add function areas to compute grid cell areas [Luis Kornblueh]
* grid_check_cyclic: bug fix
* Version 1.1.1 released
* using GRIB library version 1.1.0
* using FILE library version 1.6.0
* new attribute routines: vlistInqNatts, vlistDefAttr and vlistInqAttr
for Int, Flt and Txt
* Add support for Lambert grids [request: Patrick Samuelsson]
* Change cdiDefCompress to streamDefZtype/streamDefZlevel
* decode_timevalue: bug fix for rounding error [report: Veronika Gayler]
* grbDefTime: add support for century < 0
* using GRIB library version 1.0.6
* stream_grb:grbDefGrid use ISEC2_ScanFlag [request: Alex Kann]
* replace calendar module by a new one because of date/time problems
with years < 0 [report: Veronika Gayler]
* add module timebase
* taxis: add support for years less than zero
* use always decode_date and encode_date to decode/encode date
* Version 1.0.8 released
* stream_ieg: bug fix memory leak [report: Philip Lorenz]
* cdfInqContents: print warning if cell_measures is missing
* cdfInqContents: check also x/yvarid to compare curvilinear grids
* Version 1.0.7 released
* use GRIB ltype to define GENERIC zaxis
* taxisCopyTimestep: copy rdate and rtime [report: Harald Anlauf]
* grbDefGrid: write absolute value of y-inc [report: Paul Dando]
* grbDefTime: change to absolute time axis if value < 0 [report: Frank Toussaint]
* grbDefGrid: change generic grid to lonlat grid
* grbScanTimestep: bug fix for unsorted codes
* stream: mt safe version
* zaxis: mt safe version
* stream_srv/ext/ieg: bug fix for codes > 999 [report: Simon Blessing]
* cdi_limits: define MAX_STREAMS, MAX_VLISTS, MAX_GRIDS, MAX_ZAXIS
* using GRIB library version 1.0.4
* cdfInqContents: use grid_mapping not for curvilinear grids
* add env IGNORE_ATT_COORDINATES to ignore attribute coordinates
* splitBasetime: convert timeunit string to lower case
* usvs_to_uv: update for zbeta [from: Klaus Wyser]
* new function: streamNvals
* Version 1.0.4 released
* using GRIB library version 1.0.2
* cdfDefVar: set default datatype for addoffset and scalefactor to double
* cdfWriteVar*: round integer fields with NINT [report: Etienne Tourigny]
* add test version of SZIP for GRIB data
* add DATATYPE PACK1 to PACK32
* change DATATYPE from byte to bit
* split GRIB level type 105 with env var SPLIT_LTYPE_105
* file.c: remove declaration of getpagesize [report: Mark Hadfield]
* tableWrite: bug fix for undefined strings
* Version 1.0.1 released
* using GRIB library version 1.0.0
* rename *New functions to *Create
* stream_grb: update level type ISENTROPIC (report: Ag Stephens)
* stream_ieg: multiply pressure levels with 100 (report: Holger Goettel)
* cdi_error: change return type to char*
* add dummy functions gridDestroy, zaxisDestroy, taxisDestroy
* using GRIB library version 0.6.6
* cdfInqContents: check attlen for attname "axis"
* cdfInqContents: use coord vars from attr coordinates (bug report: Alberto Maurizi)
* gridPrint: print xfirst and xinc if xinc is constant
* gridGenYvals: try to calculate non global gaussian latitides
* streamOpenRead: fix bug if open failed
* vlist_var: Add function vlistChangeVarGrid
* program cdi: add option -s for short info
* cdfDefTime: attr text bounds for time axis (bug report: Veronika)
* gridToZonal: add support for GRID_GENERIC if ny > 1
* Version 0.9.6 released
* using GRIB library version 0.6.4
* update ECHAM5 parameter table
* taxis: new function taxisCopyTimestep
* stream_grb: check status of grib encoding
* stream_cdf: use addoffset and scalefactor for all datatypes
* stream_cdf: set "height above the surface" to ZAXIS_HEIGHT
* grid.c: GME grid support
* add support of time bounds
* Version 0.9.5 released
* grid_gme.c: compute boundaries of GME grid
* using GRIB library version 0.6.3
* using EXSE library version 0.9.3
* stream_srv: changes for new EXSE version
* stream_ext: changes for new EXSE version
* add IEG support
* bug fix for GRIB files with unusable VCT
* Version 0.9.4 released
* using GRIB library version 0.6.2
* using FILE library version 1.5.1
* gribCopyRecord: round recsize to 8
* grbDefGrid: safe curvilinear as lonlat grid
* grbInqTimestep: bug fix for constant fields
* timeval2vtime: bug fix for time unit MONTH and YEAR
* Version 0.9.3 released
* OPeNDAP support for netCDF (nc_dap)
use configure option --enable-dap
* cdfInqContents: support of CLM grid
* grbDefTime: prevent overflow of forcast timesteps
* cdfDefPole: check var name
* use standard name for variables
* zaxis: define bounds
* grid.c: mt safe
* vlist.c: mt safe
* stream_cdf: bug fix curvilinear grid
* cdfCopyRecord: buf fix for constant fields
* cdfCreateRecords: Bug fix (allocation of 0 bytes)
* grbScanTimestep: Bug fix (check all records)
* Version 0.9.2 released
* New function: vlistChangeVarZaxis
* grbDefGrid: change NINT to INT
* gridGenYvals: check gaussian grids
* gridCompare: check gaussian grids
* stream_grb: correct xinc if necessary
* Version 0.9.1 released
* griblib: version 0.6.1
* exselib: version 0.9.2
* stream_cdf: change cdf_get_att_* to cdfGetAtt*
* cdfReadVarSliceDP: implementation of swapyz
* zaxis: new zaxis type ZAXIS_ALTITUDE
* cdiGenVars: set only generic zaxis with 1 level on 0.0 to surface
* codeNewEntry: bug fix for code 0
* Version 0.9.0 released
* griblib: version 0.6.0
* add function zaxisDuplicate
* grbScanTimestep1: check level1 and level2
* stream_grb: bug fix in grbInqTimestep to return after error
* stream_grb: support for rotated grids
* stream_cdf: support for rotated grids
* vtime2timeval: bug fix for TUNIT_MONTH and TUNIT_YEAR
* Program cdi: change level from int to double
* Version 0.8.9 released
* griblib: version 0.5.7
* gridDuplicate: update
* cdfInqContents: check gaussian grid S->N
* rename zaxisInqLevelDP to zaxisInqLevel
* Version 0.8.8 released
* implementation of 360, 365 and 366 days calendar
* gridGenXvals: bug fix (xfirst == xlast)
* Version 0.8.7 released
* define ECHAM5.3 table
* add missing value support for 4 Byte SRV and EXT data
* gridGenXvals: bug fix (set xinc > 0)
* Version 0.8.6 released
* cdfInqContents: check gaussian grid
* gridToCurvilinear: add bounds
* gridToCell: add bounds
* gridInqXinc: return 0 if increment is not equidistant
* gridInqYinc: return 0 if increment is not equidistant
* random record structure support (for parallel GRIB output)
grbScanTimestep, varscan, stream_var, stream_record
* vlist: initialize ntsteps
* Version 0.8.5 released
* netCDF2 support
* cdfDefVars: Bug fix (vlistInqNgrids)
* stream_grb: check also leveltype to find different variables
* Version 0.8.4 released
* griblib: version 0.5.6
* grid: use bounds for gaussian and lonlat grids
* cdf_create: set initialsz to 0
* vlistChangeZaxis and vlistChangeZaxisIndex extent levinfo
* new function cdiInqMissval
* timeval2vtime: set an offset of 1 second in the call to InvCalendar
to prevent rounding errors
* Version 0.8.3 released
* cdiInqContents: read all global text attributes
* cdf_create and cdf_open: set min chunksize to 128k
* cdfDefTime: set 0 before month and day if less than 10
* new function in vlist.c: vlistChangeZaxisIndex, vlistChangeZaxis
* Version 0.8.2 released
* griblib: version 0.5.4
* file.c: set min I/O buffersize to 128k
* grib, service, extra: bug fix for variables with TIME_CONSTANT
* grb, srv, extCopyRecord: bug fix for variables with TIME_CONSTANT
* Error handling for streamOpen*
* New function cdiStringError for error handling
* change FILETYPE_CDF to FILETYPE_NC
* c++ compatible
* vlistDefVarName: overwrite old name if exist
* set size of dummy longname and units from 128 to 256
* splitBasetime: bug fix
* Version 0.8.1 released
* stream_cdf: replace cdfDefLon and cdfDefLonRot by cdfDefXaxis
replace cdfDefLat and cdfDefLatRot by cdfDefYaxis
* stream_cdf: new function cdfDefVars
* cdfInqContents: support for attribute associate
* new function: grid*name, grid*longname, grid*units
* new function: gridDefPrec, gridInqPrec
* new function: zaxisDefPrec, zaxisInqPrec
* remove: gridDefXfirst, gridDefYfirst, gridDefXlast, gridDefYlast
gridDefXinc, gridDefYinc
* Version 0.8.0 released
* new GRID type: CURVILINEAR
* add MPIOM1 table
* stream_grb.c: check var with table number
* srvReadRecord: bug fix
* cdfInqContents: set main coordinate variables to isvar=FALSE
* grid.c: add gridGenZonal, gridGenMeridional
* zaxis.c: add zaxisDefName, zaxisDefLongname, zaxisDefUnits
zaxisInqName, zaxisInqLongname, zaxisInqUnits
* grbDefLevel: change pressure level packing
* cdfInqContent: change pressure level handling
* Version 0.7.9 released
* New function: cdiOpenAppend
* zaxisDefLevels: move allocation of levels to zaxisNew
* cdfDefZaxis: bug fix zaxisID -> zaxisindex
* Version 0.7.8 released
* griblib: version 0.5.3
* dtypes.h: redefinition of INT64
* stream_cdf: use attribute missing_value
warning if bounds var not found
* Version 0.7.7 released
* dmemory: create memory list only if MEMORY_DEBUG is set
* memTotal: get total memory size from mallinfo
* tstepsNewEntry: change to add tsteps only (speedup)
* Version 0.7.6 released
* redesign of the internal record stucture
* implementation of TUNIT_MONTH and TUNIT_YEAR
* cdf read and write var with nmiss for addoffset and scalefactor
* grbDefLevel: check that vct size is less than 256
* Version 0.7.5 released
* environment variable CD_MISSVAL
* missing values for SERVICE and EXTRA
* griblib: version 0.5.2
* tableRead: update
* Version 0.7.4 released
* streamInqVlist: return vlist
* replace streamVar to vlist
* remove streamVar
* change *funcID to *func
* Version 0.7.3 released
* change configuration for netCDF and HDF5 library to --with
* HDF5 test interface
* Version 0.7.2 released
* missing values for cdiReadVar*, cdiWriteVar*
* Version 0.7.1 released
* rename library to CDI (Climate Date Interface)
* fortran interface
* cdfInqContents: new implementation
* redesign with vlist
* implementation of cell grid
* cdfWriteVar*: bug fix for non regular grid
* Version 0.7.0 released
* handle missing values
* Version 0.6.0 released
* implementation of trajectory grid
* Version 0.5.11 released
* gdi_cdf: update for mozart initial files
* Version 0.5.10 released
* reimplementation of time axis
* timesteps accesssable with timeID
* configuration with automake
* Version 0.5.8 released