Newer
Older
2009-10-21 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* seltime: bug fix for scanning of input parameter (report: Emanuele Lombardi]
* IEG format: bug fix for identification of lonlat grids
* GRIB format: bug fix for decoding of missing values (scalar version only)
* Version 1.4.0.1 released
2009-10-07 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* cdotest:eca_gsl: bug fix [report: Harald Anlauf]
* using CDI library version 1.4.0
Uwe Schulzweida
committed
* New operator: import_binary - Import binary data sets via a GrADS data descriptor file
* New operator: setvrange - Set valid range [request: Jrg Trentmann]
* added support of time units 'seconds' to all operators
- the format of all time parameter changed from hh:mm to hh:mm:ss!
* gridarea: added support for hexagonal GME grid and tripolar MPIOM grid
* mergegrid: added support for rotated lon/lat grids
* Seasstat: added env. CDO_SEASON_START to set the start month of seasons [request: Laurent Mortier]
* remapnn: added support for GRID_CELL without bounds (full grid search)
* import_cmsaf: read native float datatype and convert it to double
* ieg: added support for Gaussian grids [request: Ralf Podzun]
* store_link_cnsrv: remove two restrict keywords (bug fix) [report: Clement Alo]
* shifttime: bug fix for negative time increments [report: Andreas Hnsler]
Uwe Schulzweida
committed
2009-09-29 Frank Kaspar <Frank.Kaspar@dwd.de>
* import_cmsaf: Replacing incorrect projection parameters for sinusoidal products
Uwe Schulzweida
committed
2009-09-18 Ralf Mueller <Ralf.Mueller@zmaw.de>
* eca_gsl: consideration of different growing season start for northern and southern hemisphere
2009-07-15 Ralf Mueller <Ralf.Mueller@zmaw.de>
* eca_gsl: bug fix for finalDay in ecacore:eca4 [report: Elke Keup-Thiel]
2009-06-15 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* using CDI library version 1.3.2
* added option -Q to sort netCDF variable names
* added support for the parameter 'angle' to transform rotated coordinates
to geographic coordinates [request: Beate Mueller]
* splitsel: changed the number of output digits from 3 to 6
* settaxis: bug fix for time increment 'months' [report: Ute Merkel]
* remaplib: change loop counter from int to long
* remaplaf: fixed buffer overflow
* remapcon: change max_subseg from 1000 to 100000
Uwe Schulzweida
committed
* Remapeta: correct humidity up to highest level *nctop* where condensation is allowed
* replace: bug fix for searching of parameter code/name
Uwe Schulzweida
committed
* remapdis, remapnn: set num_srch_bins to 1 if REMAP_EXTRAPOLATE=OFF (bug fix) [report: Hamid Benhocine]
* Version 1.3.2 released
2009-04-16 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* using CDI library version 1.3.1
* set default calendar to proleptic gregorian
* New operator (experimental): select with parameter code, level, param
* added support for proleptic gregorian calendar
* added support for GRID type Lambert Conformal Conic
* import_cmsaf: read parameter for Lambert Azimuthal Equal Area projection
* import_cmsaf: read parameter for Cylindrical Equal Area projection
Uwe Schulzweida
committed
* import_cmsaf: bug fix for datasets with gain/offset and more than 1 timestep
* Sinusoidal and Lambert Azimuthal Equal Area grids with units [km]
* cdoInitialize: omp_set_num_threads have to be called for every module
* expr: add ';' at the end of input expression if missing
* added predefined lonlat grid for germany, europe and africa
* gridFromName: define GRID with one point lon=<LON>_lat=<LAT>
* sellonlatbox: select box from circular curvilinear grids
* CDO_PCTL_NBINS: change default number of bins from 100 to 101
* change max parameter from 256 to 4096 (bug fix) [report: Nils Fischer]
* intlevel: use zaxis attributes from input [report: Carmen Ulmen]
* ml2pl: added support for Geopotential Height [request: Katharina Klehmet]
* remapbil, remapbic: enable extrapolation with REMAP_EXTRAPOLATE=ON
* remapdis, remapnn: disable extrapolation with REMAP_EXTRAPOLATE=OFF
* remapcon: change bound_box to int type (~25% speed up)
* remapcon: optimization of inner loop (~7% speed up)
* remaplaf: bug fix for fields with missing values
* remapnn: bug fix for distance equal zero
* genYbounds: bug fix for non global fields
* mermean: bug fix for weights from 'zonmean' (report: Michael Sigmond)
* replaced strncpy/strncmp by memcpy/memcmp
* remap: read grid corners only if needed
* Version 1.3.1 released
2009-04-15 Pier Giuseppe Fogli <fogli@bo.ingv.it>
* chlevel: fixed bug that happens when the list of oldlev,newlev
contains the same level more than once
2009-01-16 lvaro M. Valdebenito <alvaro.valdebenito@met.no>
* Settime: added "seconds" support to "settunits", "settaxis" and "shifttime"
2009-01-15 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* New operator: remapcon2 - Second order conservative remapping
* New operator: remaplaf - Largest area fraction remapping
* New operator: remapnn - Nearest neighbor remapping
* New operator: reci - Reciprocal value
* added support for GRID type Sinusoidal
* added support for GRID type Lambert Azimuthal Equal Area
* import_cmsaf: added support for monthly mean diurnal cycle
* remap: use gridIsCyclic to check whether lon is cyclic (bug fix)
* sellonlatbox: bug fix for curvilinear grids
* setzaxis: change float to double (bug fix) [report: Pier Giuseppe Fogli]
* Arith: added filltype FILL_RECTS [request: Wolfgang Mueller]
* inputsrv: use -f format if set (bug fix)
* Seasstat: warning message for seasons with less than 3 input time steps
* merge: bug fix for usage in pipes [report: lvaro M. Valdebenito]
* remapcon: change max_subseg from 100000 to 1000
* remapbil: 2. bug fix for cross_product eq zero
* gridWeights: bug fix for areas greater than hemisphere [report: Malte Heinemann]
* intlevel: bug fix for datasets with missing values
* yseasstd,yseasvar: wrong array index (bug fix) [report: Robert Nicholas]
2008-11-13 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* using CDI library version 1.2.1
* New operator: import_cmsaf - import CM-SAF files
* New operator: gengrid - generate grid [request: Michael Boettinger]
* New operator: pow - Power [request: Gil Lizcano]
* Module Timstat: use taxis with bounds from input [request: Beate Geyer]
* sellonlatbox: added support for grid units 'radians' [request: Jeff Daily]
* sellonlatbox: added support for GRID_CELL [request: Jeff Daily]
* Added option '-u' to determinate whether to overwrite existing files [request: David Wang]
* copy, cat: concatenate time constant fields
* copy, cat: compare input files
* zonvar: activation missing (bug fix) [report: Irene Fischer-Bruns]
* detrend: change taxisCreate to taxisDuplicate [report: Ute Merkel]
* remapdis: added support for GRID_CELL without bounds (full grid search)
* remapbil: bug fix for cross_product eq zero
* sethalo: bug fix for x/y bounds [report: Helmut Haak]
* ifthen: bug fix for datasets with different missing values [report: Beate Geyer]
* runmean: bug fix for datasets with missing values [report: Carmen Ulmen]
* namelist: bug fix for wrong input
* Version 1.2.1 released
2008-08-13 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* added support for netCDF4 classic with deflate option (option -z zip)
* Arith: added filltype FILL_FILE [request: Rita Seiffert]
* New operator: intlevel - Linear level interpolation
* New operator: invertlev - Invert levels [request: Marco Giorgetta]
* New operator: sellevidx - Select levels by index [request: David Wang]
* New module: Pressure (fpressure, hpressure) [request: Jan Kazir]
* New module: Tests (normal, studentt, chisquare, beta, fisher)
* New module: Echam5ini (read_e5ml, write_e5ml)
* New operator: import_amsr to read AMSR binary files
* New operator: vertwind (testversion) [request: Michael Boettinger]
* New operator: ml2pl_lp (testversion) [request: Hui Wan]
* remapdis: check that distance is inside the range of -1 to 1 [report: Hui Wan]
* remapeta: added missing value support
* vlistCompare: compare all lon/lat values
* setpartab: added parameter LTYPE [request: Stefan Petri]
* Settime: change TIME_CONSTANT to TIME_VARIABLE if ntstep = 0
* added support of CM-SAF HDF5 grids (test version)
* DBL_IS_EQUAL: check NaN with isnan (removed! compilation problems)
* yseasmean: bug fix for datasets with missing values [report: Hans-Jrgen Panitz]
* yhourmean: bug fix for datasets with missing values
* ydaymean: bug fix for datasets with missing values
* namelist: bug fix for wrong input
* ntime: bug fix for datasets with time constant parameter only [report: David Wang]
(also affected: ndate, nmon, nyear, showdate, showtime, showmon, showyear)
* configure: --with-szlib=<directory>
* New operator: regres (Regression) [request: Wolfgang Mueller]
* New module: Gridcell (gridarea, gridweights)
* New operator: del29feb to delete the 29. February [request: Etienne Tourigny]
* Exprf: using MT safe version of bison and flex (bug fix) [report: Claas Teichmann]
* Arith: using missval from vlistID1 if ( filltype == FILL_TS && vlistIDx1 != vlistID1 )
* Arithc: recalculate number of missing values (bug fix) [report: Holger Goettel]
* Vertint: support for data on hybrid half-level
* Vertint: support for GME data [request: Luis Kornblueh]
* Vertint: bug fix for input with time constant fields
* Outputgmt: use grid_mask if present
* Input: skip ',' from standard input stream
* splitsel: bug fix for multilevel/multivar datasets [report: Heiner Widmann]
* remaplib: set luse_grid_corners = TRUE for GRID_CELL (bug fix)
* remap_conserv: skip very small regions if num_subseg exceeded limit
* remapcon: bug fix for NORMALIZE_OPT 'dest' and 'none'
* Seltime: changed value of NOPERATORS (bug fix)
* Version 1.1.1 released
2008-01-24 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* New module: Monarith (monadd, monsub, monmul, mondiv) [request: Daniel Hernandez]
* Seltime: bug fix for input with time constant fields [report: Claas Teichmann]
* Setlevel: bug fix for usage in pipes [report: Claas Teichmann]
* Outputbounds: use -ZNaN for missing values [request: Karin Meier-Fleischer]
* Outputbounds: add zonal mean [request: Malte Heinemann]
* Setgatts: improve attribute format
* Timstat: change datetime type from INT64 to char[16]
* gridWeights: warning with code number when using constant area weights
2007-10-29 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* cat: bug fix for large existing output files (>2GB) on 32-bit machines [report: Heinz-Dieter Hollweg]
* gradsdes: bug fix for monthly mean data with start day > 28 [report: Renate Brokopf]
* expr: change exponent precedence from left to right (bug fix)[report: Claas Teichmann]
* Version 1.0.9.1 released
2007-10-22 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* using CDI library version 1.0.8
* New module: yhourstat (yhour -min/-max/-sum/-mean/-avg/-std/-var) [request: Holger Goettel]
* New operator: varquot2test and meandiff2test [request: Irene Fischer-Bruns]
* ymonstat: write original order of timesteps [report: Ileana Blad]
* gradsdes: add GRIB level type to VARS [report: Ben-Jei Tsuang]
* sellonlatbox: support for curvilinear grids [request: Hannes Isaak Reuter]
* bug fix for cdo option -f format [report: Stephan Lorenz]
* runstat: add env RUNSTAT_DATE to set output date [request: Claudia Wunram]
* ifthen: bug fix for masks that varies not with time [report: David Wang]
* mrotuvb: calculate coordinates from u and v
* eca_cdd/eca_cwd: bug fix for name2 [report: James Hoffmann]
* cdotest: bug fix in eca_gsl/module.c -> 2 input streams [report: Harald Anlauf]
* use always decode_date and encode_date to decode/encode date
* remapcon: bug fix reset BABY_STEP to 0.001 [report: Claas Teichmann]
* merge: bug fix for all files with constant fields only [report: Jan Keller]
* Version 1.0.9 released
2007-07-04 Ralf Quast <ralf.quast@brockmann-consult.de>
* Timcount and Seascount: bug fix for missing values
2007-06-27 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* using CDI library version 1.0.7
* Renamed chvar, selvar, delvar, showvar, setvar and splitvar
to chname, selname, delname, showname, setname and splitname
* Renamed nvar to npar and vardes to pardes
* Renamed selpctl to timselpctl
* Selstat: renamed to Timselstat
* Vertint: add support for LM VCT [request: Tanja Stanelle]
* Input: bug fix for missing values [report: Thomas Bruns]
* Merge: bug fix for files with constant fields only [report: Christian Rodehacke]
* expr.ex: bug fix for mixed time constant and variable fields
* Ymonstat: bug fix for missing values [report: Ivonne Anders]
* remapdis: bug fix if distance is zero
* remapcon: bug fix in intersection (s1 >= ZERO) [report: Joerg Wegner]
* remapcon: speed up by increasing BABY_STEP from 0.001 to 0.01
* interpolate: bug fix for north/south bounds > 90 or < -90 [report: Stefan Hagemann]
* gradsdes: bug fix for GRIB files with absolute path [report: Matthias Bchner]
* replace ztype2ltype by zaxis2ltype
* ltype2ztype: set default zaxis type to ZAXIS_GENERIC
* selltype, setltype, chltype: extent to all ltypes [request: Patrick Samuelsson]
2007-06-26 Etienne Tourigny <tourigny@sca.uqam.ca>
* Add new operator: setrtoc and setrtoc2
* list.c: changes to accept inf and -inf as arguments
2007-06-07 Cedrick Ansorge <Cedrick.Ansorge@zmaw.de>
* New operator: smooth9
2007-05-30 Ralf Quast <ralf.quast@brockmann-consult.de>
* New operator: timcount, hourcount, daycount, moncount, yearcount, seascount
* Renamed eca_fdns, eca_strwin, eca_strbre, eca_strgal, eca_hurr
to fdns, strwin, strbre, strgal, hurr
2007-04-18 Cedrick Ansorge <Cedrick.Ansorge@zmaw.de>
* New operator: maskregion
2007-03-08 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* New operator: read_e5ini (test version)
* sinfo: print ltype for GRIB records on GENERIC zaxis
* fldmax: bug fix if all values < 0 and missvals [report: Karin Meier-Fleischer]
* vlistCompare: check grid orientation for func_sft
* gradsdes: set time increment to "mo" for monthly means
* gradsdes: process only the first 2GB of a GRIB file
* Version 1.0.7 released
2007-01-02 Ralf Quast <ralf.quast@brockmann-consult.de>
* rename tchill to wct
* split eca_strwind into eca_strwin, eca_strbre, eca_strgal and eca_hurr
2006-12-14 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* New operator: vertvar, timvar, yearvar, monvar, dayvar, hourvar
* New operator: runvar, seasvar, selvar, ydayvar, ydrunvar, ymonvar, yseasvar
* New operator: selsmon [request: Claudia Wunram]
* remap: set norm_opt after read_remap_scrip (bug fix) [report: Andreas Sterl]
* cdo: FP_FAST_FMA bug fix [report: Sunpoet]
2006-11-30 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* New operator: showformat (Showinfo) [request: Helmuth Haak]
* remap: initialize links.option (bug fix) [report: Luis Kornblueh]
* update date/time conversion from udunits (bug fix) [report: Oliver Krueger]
* rotuvb: change coordinates to geographic (bug fix) [report: Klaus Wyser]
* Wind.c: define name, longname and units [report: Chiara Cagnazzo]
* add env CDO_DISABLE_HISTORY [request: Bjrge Solli]
* add env CDO_DISABLE_FILESUFFIX [request: Heiner Widmann]
* add suffix .sz for SZIP compressed files [request: Monika Esch]
* pstreamFindID: check pstreamptr->name before use (bug fix)
* operatorInqModID: speed up
* Version 1.0.5 released
2006-11-17 Ralf Quast <ralf.quast@brockmann-consult.de>
* New module: Tchill (tchill)
* New module: Hi (hi)
* New module: ECA Indices of Daily Temperature and Precipitation Extremes
(eca_cfd, eca_csu, eca_cwdi, eca_cwfi, eca_etr, eca_fd,
eca_gsl, eca_hd, eca_hwdi, eca_hwfi, eca_id, eca_su,
eca_tg10p, eca_tg90p, eca_tn10p, eca_tn90p,
eca_tr, eca_tx10p, eca_tx90p,
eca_cdd, eca_cwd, eca_r10mm, eca_r20mm,
eca_r75p, eca_r75ptot, eca_r90p, eca_r90ptot,
eca_r95p, eca_r95ptot, eca_r99p, eca_r99ptot,
eca_rr1, eca_sdii, eca_fdns, eca_strwind)
2006-11-06 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* pstreamOpenRead: move mutex_unlock after cdoInqHistory
* Version 1.0.4 released
2006-11-06 Ralf Quast <ralf.quast@brockmann-consult.de>
* New module: Ydrunstat (ydrun -min, -max, -sum, -mean, -avg, -std, -var)
* New module: Timpctl (tim-, hour-, day-, mon-, year- pctl)
* New module: Selpctl (selpctl)
* New module: Runpctl (runpctl)
* New module: Seaspctl (seaspctl)
* New module: Ydaypctl (ydaypctl)
* New module: Ymonpctl (ymonpctl)
* New module: Yseaspctl (yseaspctl)
* New module: Ydrunpctl (ydrunpctl)
* New operator: enspctl (Ensstat)
* New operator: fldpctl (Fldstat)
* New operator: zonpctl (Zonstat)
* New operator: merpctl (Merstat)
2006-11-02 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* New operator: intntime [request: Michael Boettinger]
* New operator: mrotuvb [request: Helmuth Haak]
* New operator: outputvector [request: Helmuth Haak]
* selyear: bug fix for years > 9999 [report: Uwe Mikolajewicz]
* inttime: extention for months and years [request: Holger Goettel]
* outputcenter: support of zonal and meridional fields
* zonavg: bug fix for non gaussian or non lonlat grids
* remaplib.sort_add: don't sort if num_links <= 1
* remaplib.remap_bi?: check that src_add is valid
* Remap: use REMAP_NON_GLOBAL only for gridsize > 1
2006-09-18 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* using CDI library version 1.0.2
* set alias gradsdes to gradsdes2
* rename gradsdes to gradsdes1
* New operator: int and nint (Math) [request: Joerg Wegner]
* New operator: ydaysum, ymonsum, yseassum [request: Hannes Reuter]
* add option -z szip to compress GRIB records with SZIP
* use DBL_IS_EQUAL to compare floating point
* remapbil, remapbic: improvement and speedup for regional lonlat grids
* Seltime: print warning message if parameter not found
* pstreamDefVlist: unpack netCDF data if datatype = FLT64
* Version 1.0.2 released
2006-08-01 Uwe Schulzweida <Uwe.Schulzweida@zmaw.de>
* using CDI library version 1.0.1
* add option -b to set the number of bits for the output precision
* seldate: use parameter - for min and max val
* seldate: change date format to YYYY-MM-DDThh:mm [request: Martina Stockhaus]
* New operator: selstdname, showstdname [request: Martina Stockhaus]
* New operator: setrcaname, seloperator for RCA GRIB datasets [Frida Brantvall]
* New operator: selltype, setltype, chltype, showltype [together with Frida Brantvall]
* New operator: setpartabv
* add new parameter table format
* fix problems on cygwin [report: Mark Hadfield]
* merge: move vlistDestroy after streamClose [report: Matthias Cuntz]
* gradsdes: fix bug for only one record without time [report: Angelika Heil]
* gradsdes: fix problem for variable names with - character
* New module: Setbox [Etienne Tourigny]
* history format changed to nco [Etienne Tourigny]
* process: set MAX_ARGS from 1024 to 8192
* Version 1.0.1 released
2006-06-15 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 1.0.0
* New operator: dv2ps (Wind) [request: Luis Kornblueh]
* New module: Arithlat (mulcoslat, divcoslat) <- docu missing
* setreftime: use taxisDuplicate to copy bounds [report: Ivonne Anders]
* Seasstat: bug fix for datasets with only 1 season [report: Simon Blessing]
* Vertint: remove special treatment for geopoth
* configure: check compiler version
* Version 1.0.0 released
2006-05-04 Uwe Schulzweida <schulzweida@dkrz.de>
* New module: Mergetime [request: Stefanie Legutke]
* New operator: atan2 (Arith) [request: Tom Hardy]
* New operator: abs (Math) [request: Reiner Schnur]
* New module: Enlargegrid [request: Tom Hardy] <- docu missing
* New module: Input (input inputext inputsrv)
* Invert: fix memory release problem [report: Tom Hardy]
* setzaxis: set MAX_LINE_LEN from 1024 to 65536 [bug report: Martine Michou]
* enlarge: update for zonal and meridional data [request: Wolfgang Mueller]
* gradsdes: bug fix for unsorted GRIB data [report: Stefan Bauer]
* splitzaxis: generate file name from zaxisID+1 [bug report: Martina Stockhaus]
* splitgrid: generate file name from gridID+1
* Vardup: bug fix for missing values
* Timsort: bug fix for time constant fields
* Mastrfu: set units to [kg/s] [report: Rita Seiffert]
* Merstat: call gridWeights only if needed
* Vertint: use args2fltlist to read parameter list
* Splitrec: change record number from 5 to 6 digits
* Selbox, Maskbox, Mergegrid, Zonstat, Merstat: check number of different grids
* extent macro UNCHANGED_RECORD to cdoDefaultDataType and cdoDefaultByteorder
* pipeDefRecord, pstreamClose bug fix for seltimestep in pipes
* remove module docu from source code
* rename default grid name "ni" to "gme"
* rename operator intgrid to intgridbil
* add option -s for silent mode [request: Martina Stockhaus]
2006-03-08 Uwe Schulzweida <schulzweida@dkrz.de>
* New module: Histogram (histcount, histsum, histmean) <- docu missing
* Intgrid: missing value support for intgrid
* Cat: the output file must not exist anymore
* Zonstat: add support for GRID_GENERIC if ny > 1
* read_remap_scrip: if GME grid, read GME mask (bug report Luis)
* remaplib: change read/write of grid corners (bug fix)
* Spectral: rename sp2gp2/gp2sp2 to sp2gpl/gp2spl
* namelist: update
* Version 0.9.12 released
2006-02-01 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.9.5
* use macro DBL_IS_EQUAL to check floating-point equality
* use taxisCopyTimestep if posible
* New operator: sp2gp2 (Spectral) for ERA40 data
* New operator: gp2sp2 (Spectral) for ERA40 data
* New operator: replace (Replace)
* New operator: specinfo to print info for spectral transformation
* New module: Selstat (selmin, selmax, selsum, selmean, selavg, selstd)
* New module: Mergegrid (mergegrid) <- docu missing
* Runstat: adjust date and time
* Merge: duplicate taxis (bug fix)
* Vertint: abort for different grids (bug fix)
Uwe Schulzweida
committed
* Gradsdes: set XYHEADER to 644 (bug report: Holger)
* Remap: add GME grid support
* Remap: use environment variable NORMLIZE_OPT (bug fix)
* Cat: set tsID2 to 1 for input files with constant data only
* zaxis: add vct support for hybrid levels
* remaplib: change max_subseg from 10000 to 100000
* Selrec: add IEG support
* Version 0.9.11 released
2005-12-14 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.9.4
* IEG support
* New operator: ifthenelse (Cond2)
* Timer: option -T
* Gradsdes: IEG 32 support
* Selbox: add rotated grids
* Diff: change date and time format to ISO
Uwe Schulzweida
committed
* Gradsdes: bug fix for lonlat grids from N->S (report: Thibaut Gridel)
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
* Inttime: abort if units is not minutes, hours or days (bug fix)
* Settime: add all available calendars
* Inttime: add all available calendars
* fourier: made ifax and trig local (bug fix)
* Version 0.9.10 released
2005-10-18 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.9.2
* remapcon: replace gridbox_area after remapping
* intgrid: init array2 with zero
* Timsort: OpenMP version
* gradsdes: bug fix for ZDEF
* pstream: mt safe
* New operator: gradsdes2 (Gradsdes)
* New module: Ensstat (ensmin ensmax enssum ensmean ensavg ensstd ensvar)
* New operator: remap (Remap)
* New operator: gencon (Remap)
* New operator: outputf (Output)
* New operator: enlarge (Enlarge)
* Arith: support of constant species
* zaxis: add bounds
* Version 0.9.9 released
2005-07-17 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.9.1
* Arith:
- filling up 1. record or timestep of 1. or 2. stream if needed
* New operator: setlevel (Set)
* New operator: chlevel, chlevelv, chlevelc (Change)
* Inttime: change date and time format to ISO
* Cond: bug fix (change taxisID1 to taxisID2)
* Condc: bug fix (else if statemants)
* Compc: bug fix (else if statemants)
* Copy: bug fix (taxisID2)
* gridWeights: bug fix for non global gaussian grids
* replace args2intarr by args2intlist
* replace args2fltarr by args2fltlist
* Speedup remap and remapcon on NEC sx6
* Speedup spectral transformation (replace phcs by jspleg1)
* Version 0.9.8 released
2005-05-26 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.9.0
* Speedup Remap with masks by saving MAX_REMAPS maps
* Speedup remapcon
- remap_conserv (change malloc to realloc)
- store_link_cnsrv (change search loop)
* Setmiss: setctomiss with NaN
* Info, Sinfo, Showinfo, Settime, Seltime: change date and time format to ISO
* New module: Maskbox (masklonlatbox, maskindexbox)
* New module: Arithdays (muldpm, divdpm, muldpy, divdpy)
* New operator: setcalendar (Settime)
* New operator: setgridarea (Setgrid)
* New operator: seltabnum (Select)
* Cond: bug fix (filling up the first file)
* setmissval: bug fix
* farstd, farcstd: bug fix (for missing values)
* gridWeights: calculate area weights for LONLAT grids
* rename Expr.c to Exprf.c
* change function cdoOperatorID
* field.h: bug fix for MUL with 0
* bug fix in all Modules (define timestep)
* Version 0.9.7 released
2005-04-03 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.8.9
* support for rotated grids
* New module: Detrend (detrend)
* New module: Trend (trend)
* New module: Subtrend (subtrend)
* New module: Timsort (timsort)
* New module: Ydaystat (ydaymin, ydaymax, ydaymean, ydayavg, ydaystd)
* New module: Ymonarith (ymonadd, ymonsub, ymonmul, ymondiv)
* rename Lm* to Ymon* and Ls* to Yseas*
* Splityear: change filename for doubled years
* Version 0.9.6 released
2005-02-17 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.8.8
* bug fix for taxis with remap, copy, setgrid
* New operator: shifttime (shift time steps)
* changing all integer level to floating point
* Vertint: check range of surface pressure
* Sinfo: print data type and file type
* Invert: extended for curivilinear grids
* pstream: add function pstreamInqFiletype
* Reduced grids: read/write record if -R is used
* Version 0.9.5 released
2005-01-03 Uwe Schulzweida <schulzweida@dkrz.de>
* using CDI library version 0.8.7
* New operator: setmissval (set the missing value)
* New operator: setpartab (set the parameter table)
* Docu for operator infov, sinfov and diffv
* Version 0.9.4 released
2004-12-17 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.8.6
* New operator: gradsdes for GRIB, SERVICE and EXTRA files
* Setmiss: float (4 Byte reals) support
* Invert: bug fix
* Selbox: buf fix (add gridDefNvertex)
* grid.c: using grids from other datafile
* grid.c: generate grid from PINGO file
* fourier.c: multi threaded version of fft_set
* configure: checks for pthread and malloc library
* Version 0.9.3 released
2004-11-17 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.8.5
* New module: Seasstat (seasmin, seasmax, seassum, seasmean, seasavg, seasstd)
* New module: Lsstat (lsmean, lsavg, lsmin, lsmax, lsstd)
* New operator: Selseas
* New operator: Splitseas
* Seldate: change parameter to start date and optional end date
* readline: add parameter max length
* grid.c: generate grid from CDI file
* remapcon: Bug fix for NORMALIZE_OPT and missing values
* pthread_create: check return value
* Version 0.9.2 released
2004-10-14 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.8.4
* use compNlon to compute nlon from nlat
* pipeInqTimestep: Bug fix for Timstat in pipes
* Select: Print message if isel not found
* Timstat: add missing value support
* Runstat: add missing value support
* Lmstat: add missing value support
* Inttime: add missing value support
* Intyear: add missing value support
* Vertstat: add missing value support
* new operator: timmean, yearmean, monmean, daymean, hourmean
* new operator: runmean
* new operator: lmmean
* new operator: vertmean
* new operator: map (source code from PINGO)
* new operator: setreftime
* new operator: selrec
* new operator: splityear
* netCDF2 support
* Version 0.9.1 released
2004-09-08 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.8.3
* new module: Vertint (ml2pl, ml2hl)
* new module: Outputgmt (outputcenter, outputbounds)
* new operator: settaxis, settunits
* Arith, Cond, Comp:
input stream2 can only have 1 record or 1 timestep
* Inttime: set ntsteps to 1 if ijulinc = 0
* Timstat: set ntsteps to 1 for tim*
* seltimestep: set ntsteps to 1 if nsel = 1
* replace all streamCopyRecord by streamReadRecord and streamWriteRecord for piping
* Version 0.9.0 released
2004-07-09 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.8.2
* new module: Remap (remapcon, remapbil, remapbic, remapdis)
* new module: Setgatt (setgatt, setgatts)
* new module: Sort (sortcode, sortvar, sortlevel)
* new module: Writegrid
* new module: Vertstat (vertmin, vertmax, vertsum, vertavg, vertstd)
* new operator: delcode, delvar
* Timstat, Lmstat: use absolute timeaxis for output
* bug fix for use alias names in pipeline
* sellonlatbox: bug fix for selection out of bounds
* new option -v: Print extra details for some operators
* new option -R: Convert reduced to regular grid
* Version 0.8.9 released
2004-05-21 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.8.1
* Timstat, Runstat, Lmstat: extended for variables with TIME_CONSTANT
* pipeDefTimestep: compute nrecs for TIME_VARIABLE
* Splittime: bug fix for splithour and splitmon
* new operator: chvar, setvar
* new module: Intyear
* Version 0.8.8 released
2004-04-19 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.8.0
* Arith: new operator (min and max)
* Arith: extended for missing values
* Arithc: extended for missing values
* Selindexbox: extended for curivilinear grids
* new module: Fillmiss
* new module: Varrms
* new module: Fldrms
* new module: Setgridtype
* bug fix: setmisstoc
* bug fix: Change, Set, Settime - change copy to read/write
* Version 0.8.7 released
2004-03-14 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.7.9
* change format for online help information
* new module: Change (chcode)
* new module: Set (setcode)
* new module: Settime (setdate, settime, setyear, setmon, setday)
* new module: Runstat (runmin, runmax, runsum, runavg, runstd)
* new module: Merstat (mermin, mermax, mersum, meravg, mermean, mervar, merstd)
* new module: Zonstat (zonmin, zonmax, zonsum, zonavg, zonmean, zonvar, zonstd)
* new module: Fldstat (fldmin, fldmax, fldsum, fldavg, fldmean, fldvar, fldstd)
* new module: Cond (ifthen, ifnotthen)
* new module: Condc (ifthenc, ifnotthenc)
* Select: select float levels instead of integer
* Infos: rename infos to sinfo and vinfo to infov
* Timstat: bug fix (calculate timerange)
* Version 0.8.6 released
2004-01-05 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.7.8
* New module: Cat (cat)
* New module: Selbox (selindexbox, sellonlatbox)
* New module: Merge (merge)
* New module: Output (output, outputint, outputsrv, outputext)
* New module: Genvar (random, const)
* New module: Arithconst (addc, subc, mulc, divc)
* New module: Math (sqr sqrt exp log log10 sin cos tan asin acos atan)
* New module: Ninfo (nyear nmon ndate ntime ncode nvar nlevel)
* New module: Showinfo (showyear showmon showdate showtime showcode showvar showlevel)
* gridFromName: add default grid name r<LON>x<LAT>
* Copy: changed from one to unlimited inputfiles
* Split: bug fix for splitcode
* Version 0.8.5 released
2003-12-14 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.7.7
* pipe bug fix
* New module: Lmstat (lmean, lmavg, lmmin, lmmax, lmstd)
* New module: Splitrec
* Version 0.8.4 released
2003-10-29 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.7.5
* Version 0.8.3 released
2003-10-12 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for CDI library version 0.7.4
* changes for CDI library version 0.7.2 (HDF test interface)
* New operator: intarea, setctomiss, setmisstoc, setrangetomiss
* Version 0.8.2 released
2003-09-22 Uwe Schulzweida <schulzweida@dkrz.de>
* New operator: interpolate (source from PINGO)
* Version 0.8.1 released
2003-09-10 Uwe Schulzweida <schulzweida@dkrz.de>
* renamed to CDO (Climate Data Operators)
* changes for CDI library version 0.7.0
* replace info with vlist
* New operator: splithour, splitday, splitmon
* Version 0.8.0 released
2003-07-30 Uwe Schulzweida <schulzweida@dkrz.de>
* changes for gdi library version 0.6.0
* Info.c: handle missing values
* Version 0.7.0 released
2003-06-25 Uwe Schulzweida <schulzweida@dkrz.de>
* gdi library version 0.5.11
* New operator: intgridtraj, mastrfu
* Version 0.6.4 released
2003-06-23 Uwe Schulzweida <schulzweida@dkrz.de>
* New operator: intgrid, intpoint, inttime
* Version 0.6.3 released
2003-06-12 Uwe Schulzweida <schulzweida@dkrz.de>
* gdi library version 0.5.9
* grib library version 0.4.5
* Version 0.6.2 released
2003-05-17 Uwe Schulzweida <schulzweida@dkrz.de>
* add module Spectral with operator sp2gp, gp2sp and sp2sp
* Version 0.6.1 released
2003-04-06 Uwe Schulzweida <schulzweida@dkrz.de>
* Version 0.6.0 released