Newer
Older
2014-10-01 Uwe Schulzweida
* using CDI library version 1.6.5
* Version 1.6.5 released
2014-08-20 Uwe Schulzweida
* remapycon: added support for concave grid cells
2014-08-19 Uwe Schulzweida
* remaplaf: changed weight calculation from SCRIP to YAC
2014-08-16 Uwe Schulzweida
* import_binary: option 365_day_calendar does not work (big fix)
2014-08-13 Uwe Schulzweida
* lock call to vlistCopyFlag() [Support #5079]
2014-08-11 Uwe Schulzweida
* select: print progress status
2014-08-10 Uwe Schulzweida
* gridarea: added support for concave grid cells
2014-08-06 Uwe Schulzweida
* setpartab: not callable by this name (bug fix)
2014-07-28 Uwe Schulzweida
Uwe Schulzweida
committed
* remap_weights_conserv: changed great_circle_type[8] to great_circle_type[32] (bug fix)
* remap_define_grid: bug fix for unstructured grids (ndims[1])
2014-07-17 Yvonne Kstermann
* Filter: OpenMP version
2014-07-12 Uwe Schulzweida
* sellonlatbox: skip variables with only one grid point
2014-07-12 Uwe Schulzweida
* select: wrong result when select only one timestep (bug fix)
2014-07-07 Uwe Schulzweida
* cat: added progress status
2014-06-30 Uwe Schulzweida
* using CDI library version 1.6.4
* Version 1.6.4 released
2014-06-30 Uwe Schulzweida
* Selbox: angle of rotated grid missing (bug fix)
2014-06-19 Uwe Schulzweida
* added option --use_fftw: used in module filter
Uwe Schulzweida
committed
2014-06-18 Uwe Schulzweida
* added option --netcdf_hdr_pad <nbr>: Pad netCDF output header with nbr bytes
2014-06-12 Uwe Schulzweida
* remapeta: added support for standard name
2014-06-11 Uwe Schulzweida
* Ymonstat: sorts output by month of year
2014-06-10 Uwe Schulzweida
* eof3d: set sum weights to 1 (bug fix)
* eofcoeff: remove scaling with grid cell area weights (bug fix)
* eofcoeff3d: remove scaling with grid cell area weights (bug fix)
2014-06-02 Uwe Schulzweida
* tinfo: added support for forecast time axis
2014-05-22 Uwe Schulzweida
* remap.h: define M_PI [Bug #4845]
2014-05-16 Uwe Schulzweida
* pstream.h: added include of sys/types [Bug #4810]
2014-05-12 Uwe Schulzweida
* diff: check NaNs
2014-05-09 Uwe Schulzweida
2014-04-24 Uwe Schulzweida
* Filter: segmentation fault (bug fix)
* Filter: filters only gridsize-1 grid cells (bug fix)
* setltype, chltype: added support for GRIB2
Uwe Schulzweida
committed
2014-04-15 Uwe Schulzweida
* select/delete: add support for negative timesteps
Uwe Schulzweida
committed
* seltimestep: add support for negative timesteps [patch from: Etienne Tourigny]
2014-04-14 Uwe Schulzweida
* New operator: sealevelpressure - sea level pressure
2014-03-14 Uwe Schulzweida
* remapcon: check for missing values in normalisation
2014-03-10 Uwe Schulzweida
* added Option -H to do not append to netCDF "history" global attribute
2014-03-03 Uwe Schulzweida
* Zonstat: bug fix if input stream contains only zonal data
* Diff: added number of different values to output
* using CDI library version 1.6.3
* Version 1.6.3 released
* gridFromH5file: skipped if attribute >bounds< is defined [Bug #4411]
* expr: select variables by name
* gradsdes: added support for GRIB files >2GB [request: Ingo Kirchner]
* gradsdes: added overloading of streamInqGinfo() (bug fix for GRIB1)
* settaxis: added support for negativ time increment
* gradsdes: changed LCC to LCCR in PDEF definition [Bug #4344]
* cat: "Segmentation fault" if the output file already exist [Bug #4291]
* gridFromH5file: set fclose degree to H5F_CLOSE_STRONG [Bug #4272]
* cdoDefineGrid: first call gridFromH5file() for HDF tags
* eca_csu: added number of csu periods with more than 5days per time period [request: Moritz Maneke]
* eca_cfd: added number of cfd periods with more than 5days per time period [request: Moritz Maneke]
* remapdis: optimization for regular 2D source grids
* remapbic: optimization for regular 2D source grids
* remapbil: optimization for regular 2D source grids
* remapbil: skip explicitly call to sort_add() (weights are sorted implicitly)
* remaplib: cleanup and preparation for opt. reg2d grids
* delete: parameter level does not work [Bug #4216]
* using CDI library version 1.6.2
* Version 1.6.2 released
Uwe Schulzweida
committed
* eca_gsl: start date of growing season is wrong if the length of growing season is zero (bug fix)
* splitmon: added optional parameter to set the format string for the month [Feature #4131]
* Sort: added support for multi level variables (bug fix) [report: Irina Fast]
* gridarea: replace cell_area_tri() by huiliers_area()
* outputf: make second parameter (nelem) optional
Uwe Schulzweida
committed
* gridarea: numeric inaccuracy for triangles located directly on the pole (bug fix)
* Consecstat: init vars with 0 (bug fix)
* Seascount: added support for complex numbers
* Timcount: added support for complex numbers
* Timstat: added support for complex numbers
Uwe Schulzweida
committed
* setgridtype: parameter regular: added support for reduced grids on sub area
* mastrfu: added missing value support
Uwe Schulzweida
committed
* select: added support for key >timestep_of_year<
* selyear: fixed wrong result for negative years [Bug #3836]
* added support of ASCII grid description for GRID_LAEA
* gridGenArea: added warning message if grid cell corner not available
* gp2sp: added warning message if gp data not found
* split*: use filename extension from input file
* gridCurvilinearToRegular: set tolerance to 1.e-6
* using CDI library version 1.6.1
* Version 1.6.1 released
* select: added support for key >minute< [request: Beate Gayer]
* inttime: removes last time step [Bug #3611]
Uwe Schulzweida
committed
* mrotuvb: added option >noint< to disable the interpolation to the grid cell centre
* scatter: fails with missing values [Bug #3492]
* gradsdes: added support for netCDF files
* Info: add chunking information of netcdf files (only with verbose output) [Feature #3489]
* select: added support to expand integer parameter
* select: added support for key >hour<
* shifttime: wrong result for negative hours and days [Bug #3440]
* selmon: month not found for negative years [Bug #3439]
* splitmon: month not found for negative years
Uwe Schulzweida
committed
* expr: wrong results if left operand has one level and right operand has more than one level (bug fix) [report: Walter Sauf]
* enscrps: wrong result since CDO version 1.5.6 [Bug #3403]
* fldcor: check missing value of 2. input file (bug fix) [report: Hans-Jrgen Panitz]
* using CDI library version 1.6.0
* Version 1.6.0 released
* gridarea: set number of timesteps to 0 (bug fix for operator chaining) [report: Dirk Notz]
Uwe Schulzweida
committed
* merge: uses size of the first input file for the output buffer [Bug #3290]
Uwe Schulzweida
committed
* New operator: yearmonmean - yearly mean from monthly data
Uwe Schulzweida
committed
* added cdoDefaultFileType to UNCHANGED_RECORD (bug fix)
* masklonlatbox: added support for curvilinear grids
* New operator: duplicate - Duplicates a dataset
Uwe Schulzweida
committed
* sellonlatbox: wrong result with overlapped lonlatbox on curvilinear grids (bug fix) [report: Dirk Notz]
* New operator: timselvar1 - Time range variance [Divisor is (n-1)]
* New operator: timselstd1 - Time range standard deviation [Divisor is (n-1)]
* New operator: runvar1 - Running variance [Divisor is (n-1)]
* New operator: runstd1 - Running standard deviation [Divisor is (n-1)]
* ensrkhisttime: fixed memory fault [https://code.zmaw.de/boards/1/topics/1657]
* Added CDO option -W to print extra warning messages
* New operator: ymonvar1 - Multi-year monthly variance [Divisor is (n-1)]
* New operator: ymonstd1 - Multi-year monthly standard deviation [Divisor is(n-1)]
* New operator: ydayvar1 - Multi-year daily variance [Divisor is (n-1)]
* New operator: ydaystd1 - Multi-year daily standard deviation [Divisor is (n-1)]
* New operator: yhourvar1 - Multi-year hourly variance [Divisor is (n-1)]
* New operator: yhourstd1 - Multi-year hourly standard deviation [Divisor is (n-1)]
* New operator: ydrunvar1 - Multi-year daily running variance [Divisor is (n-1)]
* New operator: ydrunstd1 - Multi-year daily running standard deviation [Divisor is (n-1)]
* New operator: timvar1 - Time variance [Divisor is (n-1)]
* New operator: timstd1 - Time standard deviation [Divisor is (n-1)]
* New operator: hourvar1 - Hourly variance [Divisor is (n-1)]
* New operator: hourstd1 - Hourly standard deviation [Divisor is (n-1)]
* New operator: dayvar1 - Daily variance [Divisor is (n-1)]
* New operator: daystd1 - Daily standard deviation [Divisor is (n-1)]
* New operator: monvar1 - Monthly variance [Divisor is (n-1)]
* New operator: monstd1 - Monthly standard deviation [Divisor is (n-1)]
* New operator: yearvar1 - Yearly variance [Divisor is (n-1)]
* New operator: yearstd1 - Yearly standard deviation [Divisor is (n-1)]
* New operator: ensstd1 - Ensemble standard deviation [Divisor is (n-1)]
* New operator: ensvar1 - Ensemble variance [Divisor is (n-1)]
* New operator: fldstd1 - Field standard deviation [Divisor is (n-1)]
* New operator: fldvar1 - Field variance [Divisor is (n-1)]
* New operator: adisit - Potential temperature to in-situ temperature
Uwe Schulzweida
committed
Uwe Schulzweida
committed
* New operator: select - select fields from an unlimited number of input files
* diff: print only records that differ
* setpartab: added namelist entry 'delete'
* expr: wrong result for operation var1/var2 where var2 = 0
* Settime: set number of output timesteps to unlimited
* Runstat: added support for time bounds (Bug #3127)
* runpctl: added support for time bounds
* setcalendar: changed CDO calendar names to CF calendar names
(standard, proleptic_gregorian, 360_day, 365_day, 366_day)
* using CDI library version 1.5.9
* Version 1.5.9 released
* PROJ.4: use proj_api.h instead of projects.h
* gradsdes: use pstreamInqByteorder() [Bug #3041]
* zonSTAT: check whether a zonal grid already exists (bug fix)
* added workaround to combine CDO operators with the result of mergetime, merge, copy, cat, ens<STAT>
* Selbox: extend check for latitude indices
* enlarge: added missing value support [request: Chris Fletcher]
* Split: added parameter swap to swap the position of <obase> and <xxx> in the filename
* splitgrid: bug fix for gridID output in filename <xxx>
* splitzaxis: bug fix for zaxisID output in filename <xxx>
* cdo: added option -k <chunktype> to set the chunk type to auto, grid or lines
* cdo option -z zip: added optional compression level -z zip[_1-9] [request: Etienne Tourigny]
* pipeInqVlist: wait MIN_WAIT_CYCLES if processNumsActive() == 1 (bug fix) [report: Jaison Ambadan]
* bug fix for user defined lon/lat grids
This bug was introduced in CDO version 1.5.8.
* using CDI library version 1.5.8
* Version 1.5.8 released
* mastrfu: set datatype to 32-bit float
* Fldstat: set weight to 1 if gridsize is 1
* eca_rr1: result has wrong long name attribute [Bug #2763]
* eca_pd: disabled, use eca_rr1 (same functionallity) [Bug #2763]
* use read/write timer only for single threaded CDO version [Support #2854]
* replace: change streamNtsteps() to vlistNtsteps() (bug fix for CDI 1.5.7)
* Added support for netCDF4(HDF5) formatted SCRIP grids
* processDelete: set Process[processID].threadID = 0 (bug fix)
* added CDO option -L to lock all I/O calls. This option is neccessary if external I/O libraries like
netCDF4 (HDF5) were installed without thread-safe support.
* using CDI library version 1.5.7 (merged from cdi-pio)
* Arith: bug fix for NVARS1 == NVARS2
This bug was introduced in CDO version 1.5.6.
* Version 1.5.6.1 released
* arradd: disable SSE2 optimazation (bug in residual loop)
The following statistical functions are affected:
*mean, *avg, *sum, *var, *std
if all of the following conditions are complied:
- x86_64 machine (tornado, squall, thunder, lizard)
- dataset has no missing values
- the horizontal grid size is > 1 and not multiple of 8
This bug was introduced in CDO version 1.5.6.
* using CDI library version 1.5.6
* Version 1.5.6 released
* vlistCompare(): added check to compare sorted parameter names
Uwe Schulzweida
committed
* gradsdes: added support for 64-bit SERVICE, EXTRA and IEG format
Uwe Schulzweida
committed
* import_binary: added support for 64-bit floats via extra OPTION keyword flt64 [request: Tim Bruecher]
* sort_iter: call to sort_par() only for parent <= (nthreads-1)
* added remapsort.c
* remaplib::sort_add: use optimized version (speedup +20%)
* userFileOverwrite: accept also a simple 'y' as yes [request: Dirk Notz]
* Arith: added support for 3D masks [request: Ralf Mller]
* pipeInqVlist: wait only 1s and check for other active CDO processes
* Selvar: added check for time constant fields (bug fix) [report: Ralf Mller]
* mastrfu: use grid coordinates from input file
* pstreamCheckDatarange: activate check only if ivals > 0
* ymonmean: removed time bounds if present (bug fix) [Bug #2474]
* ymonsub: added support for time bounds (bug fix) [Bug #2475]
* New operator: showunit (Showinfo)
* Sinfo: changed Time entry to Ttype
* arradd: SSE2 version (performance +15%)
* Runstat: optimize missing value handling (speedup)
* Runstat: OpenMP parallelization over parameter nts
* Runstat: added env. RUNSTAT_NOMISS
* input: changed time axis to RELATIVE
* using CDI library version 1.5.5
* Version 1.5.5 released
* Ensstat3: nvars undefined (bug fix)
Uwe Schulzweida
committed
* remap_bilin: using fabs(src_lats[n]) for distance-weighted average (big fix) [report: Renate Brokopf]
* remap_bilic: using fabs(src_lats[n]) for distance-weighted average (big fix)
Uwe Schulzweida
committed
* grid.c::gridCurvilinearToRegular: bug fix [report: Ag Stevens]
* remaplib: changed warning message for bilinear/bicubic interpolation
* Yseasstat: changed timestamp of DJF season to last timestep of February
* ml2pl: added support for GRIB2 parameter names [Bug #2252]
* pipeInqVlist: changed init of time_to_wait [Bug #2133]
* replace: removed debug output [report: K. Houchi]
* eca_rr1: missing value not set correctly (bug fix) [report: Hans-Juergen Panitz]
* ecacore: fix all missing values
* geopotheight: added support for WMO code table
* New module: Yhourarith (yhouradd, yhoursub, yhourmul, yhourdiv) [request: Beate Gayer]
Uwe Schulzweida
committed
* mergetime: added env. SKIP_SAME_TIME to skip all double entries of the same timestamp [request: K. Houchi]
* Added operator rohpot - potential density for MPIOM (experimental) [request: Helmut Haak]
* using CDI library version 1.5.4
* Version 1.5.4 released
* remapcon: added env REMAP_AREA_MIN, to set the minimum area fraction [request: Gernot Geppert]
* remaplaf: using binary search (speedup)
* Timstepstat: added support for time bounds
* remaplib: use grid2_bound_box only for conservativ remapping
* setgridtype: added support for grid type lonlat
splitsel: added support for constant fields [Bug #1701]
* timpctl: check index of bins (bug fix for NaNs) [report: Christopher Moseley]
* pipeInqVlist: use pthread_cond_timedwait to wait 30 sec (bug fix) [report: Carsten Ehbrecht]
* pstreamCheckDatarange: use nint() to round smin and smax [report: Kristina Frhlich]
* Added operator timcovar - covariance over time
* Added operator fldcovar - covariance in grid space
* shifttime: added support for time bounds
* setvrange: don't set the attribute valid_range
* added operator mod - modulo [request: Swantje Preuschmann]
* using CDI library version 1.5.3
* Version 1.5.3 released
Uwe Schulzweida
committed
* Monarith (monadd, monsub, monmul, mondiv): wrong results for 3D variables (bug fix) [report: Chris Fletcher]
* deflate compression with netCDF4 doesn't work (bug fix) [report: Geert Jan van Oldenborgh]
* Added operator: muldoy - Multiply with day of year [request: David Gobbett]
* eca_cdd, eca_cwd, eca_rr1, eca_sdii: variable parameter [request: Martin Stendel]
Uwe Schulzweida
committed
* gridarea: bug fix for coarse grid cells with lons between 350 and 0 degrees [report: Aiko Voigt]
* sellonlatbox: correct lon bounds if necessary (bug fix) [report: Klaus Keuler]
* ifthenelse: uses only the first time step of the first input file (bug fix) [report: Ronny Petrik]
* using CDI library version 1.5.2
* Version 1.5.2 released
* ymon<stat>: preserve time axis attributes (big fix) [report: Martin Juckes]
* eof, eoftime, eofspatial, eof3d - Empirical Orthogonal Functions:bug fix [report: Eileen Dahms and Frank Lunkeit]
There was a bug in the calculation of the Frobenius norm, which has only been triggered in some cases
when using a low precision. The normalization has been changed thus that the eigenvectors are not weighted
and their absolute is 1. The default settings for convergence have been changed to be more conservative:
CDO_SVD_MODE=jacobi MAX_JACOBI_ITER=12 FNORM_PRECISION=1.e-12
* setgridtype: compress GME grids [request: Jaison Ambadan]
Uwe Schulzweida
committed
* remapeta: Changed minimum pressure level for condensation from 1000Pa to 0Pa [request: Patrick Joeckel]
Use env. REMAPETA_PTOP to set the minimum pressure level for condensation.
* dv2uv: added support for GRIB2 parameter names (d, vo)
* expr: wrong result for expression 'const-var (e.g. 1-var)' (bug fix) [report: Hans-Jrgen Panitz]
This bug was introduced in CDO version 1.5.1
* invertlat: bug fix for CURVILINEAR grids [report: Christine Rademacher]
* import_binary: added support for OPTION ZREV (bug fix) [report: Rene Hommel]
* histAddValue: added check for rounding errors
* replace: added support to replace single levels
* Vertstat: bug fix for streams with time invariant variables
* using CDI library version 1.5.1
* Version 1.5.1 released
* Added operator stdatm: standard atmosphere values for T,PS
* Added operator intlevel3d: vertical interpolation to/from 3d vertical coordinates
* Exprf: wrong result for missing values != (double) -9.e33 (bug fix) [report: Michael Boettinger]
* detrend: added support for time bounds (bug fix) [report: Andy Aschwanden]
* Filter: added support for time bounds (bug fix) [report: Andy Aschwanden]
* setgridtype: convert curvilinear to unstructured grids [request: Steffen Tietsche]
Uwe Schulzweida
committed
* Remap: added env REMAP_THRESHHOLD to set the threshhold for coordinate transformation
* import_binary: Added support for 1 and 2 byte integer [code from: Karsten ???]
Uwe Schulzweida
committed
* bug fix: fldmean and similar operators fail with 1D grid (1 latitude value) [report: Etienne Tourigny]
* Added support for netCDF4 classic format; option -f nc4c
* eca*: use the input calendar for the output streams (bug fix) [report: Martin Juckes]
* intyear: check contents of input files [report: Angelika Heil]
* pipeDefTimestep: set EOP if nrecs = 0 (dead lock) [report: Luis Kornnblueh]
Uwe Schulzweida
committed
* eofspatial: integer overflow; wrong result for grid size > 46340 (bug fix) [report: Hans-Jrgen Panitz]
* outputkeys: added keys xind, yind [request: Nils Fischer]
* using CDI library version 1.5.0
* Version 1.5.0 released
* Added operator chparam - Change parameter identifier
* Added operator setparam - Set parameter identifiers
* Added operator splitparam - Split parameter identifiers
* Added operator selparam - Select parameters by identifier
* Added operator delparam - Delete parameters by identifier
* sinfo: changed output of table and code number to parameter identifier
* info: changed output of code number to parameter identifier
* diff: changed output of code number to parameter identifier
* setgrid: added parameter: dereference
* cdo: added option -O to overwrite existing output file [request: Chris Fletscher]
* fldmean: check range of lon/lat bounds [report: Jonas Bhend]
* ml2pl: wrong result if input file contains full and half level data (bug fix) [report: Jaison Ambadan]
* gridToCell(GME): set X/Y units to degrees_east/degrees_north [report: Patrick Brockmann]
* expr: added functions abs(), int(), nint(), sqr()
* remapbil: fix pole problem with gr15_psi grids [report: Karoline Block]
* renamed function var to expr_var [report: Jed Kaplan]
* splitcode: added support for code numbers > 999
* changed grid name GRID_CELL to GRID_UNSTRUCTURED
Uwe Schulzweida
committed
* spcut: only correct results with continuous wave numbers starting at 1 (bug fix)
* remaplib: fix data race in calculation of bin_addr (OpenMP)
* detrend: integer overflow; wrong result for nts > 46340 (bug fix) [report: Torsten Seifert]
* sellonlatbox: does not work as expected (bug fix) [report: Jonathan Schubert]
* sellonlatbox: cellidx was not initialized (bug fix) [report: Jaison Ambadan]
* remaplib: Changed remap weights from 2D to 1D array
* using CDI library version 1.4.7
* Version 1.4.7 released
* import_cmsaf: set max length of date string to 8 (bug fix)
* import_cmsaf: added time information also for time constant fields [request: Frank Kaspar]
* eofcoeff: set size of eof_name to 6 (bug fix)
* import_binary: check for gauss grids only when flag linear=0
* readline: filter carriage return '\r' [report: Christian Steger]
* setclonlatbox: bug fix for 1x1 grids [report: Angelika Heil]
Uwe Schulzweida
committed
* Settime: bug fix for time independent variables in combination with other operators (pipes)
* mulcoslat: added support for GME grids [request: Jaison-Thomas Ambadan]
* select: added paramter *ltype* [request: Jaison-Thomas Ambadan]
* Added operator eca_pd - Precipitation days index per time period [request: Barbara Hennemuth]
* sellonlatbox: fix rounding error of the last lon index [report: Mondher Chekki]
* ml2pl: open output stream after all error checks
* sethalo: added support for grid units radian
* sethalo: correct lower bound of grid bounds for negative halos (bug fix)
* fldmean: gives wrong result for grid units radian (bug fix) [report: Pilar Ripodas]
* Yseasstat: bug fix for datasets with time constant fields [report: Ute Merkel]
* Cat: call vlistCompare for all input files
Uwe Schulzweida
committed
* added env. CDO_FILE_SUFFIX to set the file suffix of CDO generated file names
Uwe Schulzweida
committed
* Fldstat2: replaced macros FDIV and FSQRT by function calls DIV and SQRT
* New module: Ydayarith (ydayadd, ydaysub, ydaymul, ydaydiv)
* using CDI library version 1.4.6
* Version 1.4.6 released
* using libtool for linking (rpath)
* include libcdi as subproject
* eca_gsl: adjust implementation to fit definition by ECA [report: Stefan Fronzek]
* eca_gsl: make usable in pipes (bug fix) [report: Stefan Fronzek]
* sellevel: copy zaxis meta data name and units (bug fix) [report: Don Murray]
* pstreamDefTimestep: removed call to streamSync (very slow on GPFS)
* changed percentile parameter type from integer to float [request: Nikolaus Groll]
* changed predefined gaussian grid names from t<RES>grid to n<N>
* sellonlatbox: fix rounding error of the last lon index [report: Flore Mounier]
* Module Expr: added missing value support [request: Marco van Hulten]
* seldate: open output file only when time steps found (bug fix) [report: Hannes Reuter]
* Added module Filter - Time series filtering
* GRIB1 decode: Correct ZeroShiftError of simple packed spherical harmonics
Uwe Schulzweida
committed
* bug fix for wrong result of SZIP compressed GRIB records with 24 bit
packing and a compression ratio < 1.05 [report: Aiko Voigt]
Uwe Schulzweida
committed
* Added operator setvals - Set list of old values to new values
* Added operator eof - Calculate EOFs in spatial or time space
* Added operator eoftime - Calculate EOFs in time space
* Added operator eofspatial - Calculate EOFs in spatial space
* Added operator eofcoeff - Principal coefficients of EOFs
* Added operator consecsum - Consecutive Sum
* Added operator consects - Consecutive Timesteps
* using CDI library version 1.4.4
* Version 1.4.4 released
Uwe Schulzweida
committed
* fldsum: change result from 0 to missval, if only missing values found [report: Angelika Heil]
Uwe Schulzweida
committed
* intyear: set the interpolation result always to missval, if missing values found [report: Angelika Heil]
* Added support for time units 3hours and 6hours [request: Jaison-Thomas Ambadan]
* Remap: bypass variables with gridtype generic and only one gridpoint
* selgrid: change gridID to grididx (bug fix)
* Added operator cloudlayer: compute low, mid and high clouds [request: Daniel Klocke]
* vertwind: added missing value support
Uwe Schulzweida
committed
* standard deviation (bug fix): change the result from missval to zero, if variance is zero [report: Jaison-Thomas Ambadan]
* Added operator tstepcount: count number of timesteps (experimental) [request: Swantje Preuschmann]
Uwe Schulzweida
committed
* import_binary: added support for variables with different number of levels [report: Dennis Shea]
* sellonlatbox: bug fix for parameter lon2 [report: Alberto Maurizi]
* random: added optional parameter seed
* pstreamWriteRecord: check pstreamptr->varlist (bug fix) [report: Kevin Sieck]
* added predefined grid t<RES>zon
* expr: added support for const/var (bug fix) [report: Youmin Chen]
* Added support for netCDF time bounds (bug fix) [report: Beate Geyer]
* inputsrv: added level information (bug fix) [report: Simon Blessing]
* using CDI library version 1.4.3
* changed GRIB1 default packing type of spherical harmonics to complex
* added CDO option -M to indicate that the I/O streams have missing values
* Version 1.4.3 released
* using CDI library version 1.4.2
* Added new module Gridboxstat (testversion)
* Version 1.4.2 released
* netCDF+packed data: check that all values are inside the valid range
* remove netCDF offset/scalefactor if option -b 32 is set
* Ensstat: don't overwrite existing files
* Zonstat: added support for generic grids
* Merstat: added support for generic grids
* import_cmsaf: added more corrections for wrong projection parameter
* replace: added support for time constant fields [request: Wei Wei]
* Genweights: use netCDF2 (64bit) for large remap weights files [request: Daniel Goll]
* added module Fourier
* Detrend: OpenMP parallelization
* remapcon, remaplaf: speed up by fast store of links
* merge, mergetime: don't overwrite existing files
* New operator: splittabnum - Split parameter table numbers
* showtime: removed output of date, only print time string hh:mm:ss
* convert date and time to string for printing
* New operator: sethalo - Set the left and right bounds of a field
* change number of input streams from unlimited to 1 in pipes
* rename selgridname/selzaxisname to selgrid/selzaxis
* Selvar: abort if no variable is selected
* added default zaxis name "surface"
* setgridtype: added parameter regular to convert reduced gaussian grids
* gridFromFile: check floating point parameter
* remap: bug fix for weights from gennn (set remap_extrapolate = TRUE) [report: Helmut Frank]
* gridFromNCfile: lock call to nc_open (race condition) [report: Nils Fischer]
* outputbounds: added support for meridional data
* showtime: added comma to output string (bug fix) [report: Stefan Hagemann]
* seltime: bug fix for scanning of input parameter (report: Emanuele Lombardi]
* IEG format: bug fix for identification of lonlat grids
* GRIB format: bug fix for decoding of missing values (scalar version only)
* Version 1.4.0.1 released
* cdotest:eca_gsl: bug fix [report: Harald Anlauf]
* using CDI library version 1.4.0
Uwe Schulzweida
committed
* New operator: import_binary - Import binary data sets via a GrADS data descriptor file
* New operator: setvrange - Set valid range [request: Jrg Trentmann]
* added support of time units 'seconds' to all operators
- the format of all time parameter changed from hh:mm to hh:mm:ss!
* gridarea: added support for hexagonal GME grid and tripolar MPIOM grid
* mergegrid: added support for rotated lon/lat grids
* Seasstat: added env. CDO_SEASON_START to set the start month of seasons [request: Laurent Mortier]
* remapnn: added support for GRID_CELL without bounds (full grid search)
* import_cmsaf: read native float datatype and convert it to double
* ieg: added support for Gaussian grids [request: Ralf Podzun]
* store_link_cnsrv: remove two restrict keywords (bug fix) [report: Clement Alo]
* shifttime: bug fix for negative time increments [report: Andreas Hnsler]
Uwe Schulzweida
committed
* import_cmsaf: Replacing incorrect projection parameters for sinusoidal products
Uwe Schulzweida
committed
* eca_gsl: consideration of different growing season start for northern and southern hemisphere
* eca_gsl: bug fix for finalDay in ecacore:eca4 [report: Elke Keup-Thiel]
* using CDI library version 1.3.2
* added option -Q to sort netCDF variable names
* added support for the parameter 'angle' to transform rotated coordinates
to geographic coordinates [request: Beate Mueller]
* splitsel: changed the number of output digits from 3 to 6
* settaxis: bug fix for time increment 'months' [report: Ute Merkel]
* remaplib: change loop counter from int to long
* remaplaf: fixed buffer overflow
* remapcon: change max_subseg from 1000 to 100000
Uwe Schulzweida
committed
* Remapeta: correct humidity up to highest level *nctop* where condensation is allowed
* replace: bug fix for searching of parameter code/name
Uwe Schulzweida
committed
* remapdis, remapnn: set num_srch_bins to 1 if REMAP_EXTRAPOLATE=OFF (bug fix) [report: Hamid Benhocine]
* Version 1.3.2 released
* using CDI library version 1.3.1
* set default calendar to proleptic gregorian
* New operator (experimental): select with parameter code, level, param
* added support for proleptic gregorian calendar
* added support for GRID type Lambert Conformal Conic
* import_cmsaf: read parameter for Lambert Azimuthal Equal Area projection
* import_cmsaf: read parameter for Cylindrical Equal Area projection
Uwe Schulzweida
committed
* import_cmsaf: bug fix for datasets with gain/offset and more than 1 timestep
* Sinusoidal and Lambert Azimuthal Equal Area grids with units [km]
* cdoInitialize: omp_set_num_threads have to be called for every module
* expr: add ';' at the end of input expression if missing
* added predefined lonlat grid for germany, europe and africa
* gridFromName: define GRID with one point lon=<LON>_lat=<LAT>
* sellonlatbox: select box from circular curvilinear grids
* CDO_PCTL_NBINS: change default number of bins from 100 to 101
* change max parameter from 256 to 4096 (bug fix) [report: Nils Fischer]
* intlevel: use zaxis attributes from input [report: Carmen Ulmen]
* ml2pl: added support for Geopotential Height [request: Katharina Klehmet]
* remapbil, remapbic: enable extrapolation with REMAP_EXTRAPOLATE=ON
* remapdis, remapnn: disable extrapolation with REMAP_EXTRAPOLATE=OFF
* remapcon: change bound_box to int type (~25% speed up)
* remapcon: optimization of inner loop (~7% speed up)
* remaplaf: bug fix for fields with missing values
* remapnn: bug fix for distance equal zero
* genYbounds: bug fix for non global fields
* mermean: bug fix for weights from 'zonmean' (report: Michael Sigmond)
* replaced strncpy/strncmp by memcpy/memcmp
* remap: read grid corners only if needed
* Version 1.3.1 released
* chlevel: fixed bug that happens when the list of oldlev,newlev
contains the same level more than once
* Settime: added "seconds" support to "settunits", "settaxis" and "shifttime"
* New operator: remapcon2 - Second order conservative remapping
* New operator: remaplaf - Largest area fraction remapping
* New operator: remapnn - Nearest neighbor remapping
* New operator: reci - Reciprocal value
* added support for GRID type Sinusoidal
* added support for GRID type Lambert Azimuthal Equal Area
* import_cmsaf: added support for monthly mean diurnal cycle
* remap: use gridIsCyclic to check whether lon is cyclic (bug fix)
* sellonlatbox: bug fix for curvilinear grids
* setzaxis: change float to double (bug fix) [report: Pier Giuseppe Fogli]
* Arith: added filltype FILL_RECTS [request: Wolfgang Mueller]
* inputsrv: use -f format if set (bug fix)
* Seasstat: warning message for seasons with less than 3 input time steps
* merge: bug fix for usage in pipes [report: lvaro M. Valdebenito]
* remapcon: change max_subseg from 100000 to 1000
* remapbil: 2. bug fix for cross_product eq zero
* gridWeights: bug fix for areas greater than hemisphere [report: Malte Heinemann]
* intlevel: bug fix for datasets with missing values
* yseasstd,yseasvar: wrong array index (bug fix) [report: Robert Nicholas]
* using CDI library version 1.2.1
* New operator: import_cmsaf - import CM-SAF files
* New operator: gengrid - generate grid [request: Michael Boettinger]
* New operator: pow - Power [request: Gil Lizcano]
* Module Timstat: use taxis with bounds from input [request: Beate Geyer]
* sellonlatbox: added support for grid units 'radians' [request: Jeff Daily]
* sellonlatbox: added support for GRID_CELL [request: Jeff Daily]
* Added option '-u' to determinate whether to overwrite existing files [request: David Wang]
* copy, cat: concatenate time constant fields
* copy, cat: compare input files
* zonvar: activation missing (bug fix) [report: Irene Fischer-Bruns]
* detrend: change taxisCreate to taxisDuplicate [report: Ute Merkel]
* remapdis: added support for GRID_CELL without bounds (full grid search)
* remapbil: bug fix for cross_product eq zero
* sethalo: bug fix for x/y bounds [report: Helmut Haak]
* ifthen: bug fix for datasets with different missing values [report: Beate Geyer]
* runmean: bug fix for datasets with missing values [report: Carmen Ulmen]
* namelist: bug fix for wrong input
* Version 1.2.1 released
* added support for netCDF4 classic with deflate option (option -z zip)
* Arith: added filltype FILL_FILE [request: Rita Seiffert]
* New operator: intlevel - Linear level interpolation
* New operator: invertlev - Invert levels [request: Marco Giorgetta]
* New operator: sellevidx - Select levels by index [request: David Wang]
* New module: Pressure (fpressure, hpressure) [request: Jan Kazir]
* New module: Tests (normal, studentt, chisquare, beta, fisher)
* New module: Echam5ini (read_e5ml, write_e5ml)
* New operator: import_amsr to read AMSR binary files
* New operator: vertwind (testversion) [request: Michael Boettinger]
* New operator: ml2pl_lp (testversion) [request: Hui Wan]
* remapdis: check that distance is inside the range of -1 to 1 [report: Hui Wan]
* remapeta: added missing value support
* vlistCompare: compare all lon/lat values
* setpartab: added parameter LTYPE [request: Stefan Petri]
* Settime: change TIME_CONSTANT to TIME_VARIABLE if ntstep = 0
* added support of CM-SAF HDF5 grids (test version)
* DBL_IS_EQUAL: check NaN with isnan (removed! compilation problems)
* yseasmean: bug fix for datasets with missing values [report: Hans-Jrgen Panitz]
* yhourmean: bug fix for datasets with missing values
* ydaymean: bug fix for datasets with missing values
* namelist: bug fix for wrong input
* ntime: bug fix for datasets with time constant parameter only [report: David Wang]
(also affected: ndate, nmon, nyear, showdate, showtime, showmon, showyear)
* configure: --with-szlib=<directory>
* New operator: regres (Regression) [request: Wolfgang Mueller]
* New module: Gridcell (gridarea, gridweights)
* New operator: del29feb to delete the 29. February [request: Etienne Tourigny]
* Exprf: using MT safe version of bison and flex (bug fix) [report: Claas Teichmann]
* Arith: using missval from vlistID1 if ( filltype == FILL_TS && vlistIDx1 != vlistID1 )
* Arithc: recalculate number of missing values (bug fix) [report: Holger Goettel]
* Vertint: support for data on hybrid half-level
* Vertint: support for GME data [request: Luis Kornblueh]
* Vertint: bug fix for input with time constant fields
* Outputgmt: use grid_mask if present
* Input: skip ',' from standard input stream
* splitsel: bug fix for multilevel/multivar datasets [report: Heiner Widmann]
* remaplib: set luse_grid_corners = TRUE for GRID_CELL (bug fix)
* remap_conserv: skip very small regions if num_subseg exceeded limit
* remapcon: bug fix for NORMALIZE_OPT 'dest' and 'none'
* Seltime: changed value of NOPERATORS (bug fix)
* Version 1.1.1 released
* New module: Monarith (monadd, monsub, monmul, mondiv) [request: Daniel Hernandez]
* Seltime: bug fix for input with time constant fields [report: Claas Teichmann]
* Setlevel: bug fix for usage in pipes [report: Claas Teichmann]
* Outputbounds: use -ZNaN for missing values [request: Karin Meier-Fleischer]
* Outputbounds: add zonal mean [request: Malte Heinemann]
* Setgatts: improve attribute format
* Timstat: change datetime type from INT64 to char[16]
* gridWeights: warning with code number when using constant area weights
* cat: bug fix for large existing output files (>2GB) on 32-bit machines [report: Heinz-Dieter Hollweg]
* gradsdes: bug fix for monthly mean data with start day > 28 [report: Renate Brokopf]
* expr: change exponent precedence from left to right (bug fix)[report: Claas Teichmann]
* Version 1.0.9.1 released
* using CDI library version 1.0.8
* New module: yhourstat (yhour -min/-max/-sum/-mean/-avg/-std/-var) [request: Holger Goettel]
* New operator: varquot2test and meandiff2test [request: Irene Fischer-Bruns]
* ymonstat: write original order of timesteps [report: Ileana Blad]
* gradsdes: add GRIB level type to VARS [report: Ben-Jei Tsuang]
* sellonlatbox: support for curvilinear grids [request: Hannes Isaak Reuter]
* bug fix for cdo option -f format [report: Stephan Lorenz]
* runstat: add env RUNSTAT_DATE to set output date [request: Claudia Wunram]
* ifthen: bug fix for masks that varies not with time [report: David Wang]
* mrotuvb: calculate coordinates from u and v
* eca_cdd/eca_cwd: bug fix for name2 [report: James Hoffmann]
* cdotest: bug fix in eca_gsl/module.c -> 2 input streams [report: Harald Anlauf]
* use always decode_date and encode_date to decode/encode date
* remapcon: bug fix reset BABY_STEP to 0.001 [report: Claas Teichmann]
* merge: bug fix for all files with constant fields only [report: Jan Keller]
* Version 1.0.9 released
* Timcount and Seascount: bug fix for missing values
* using CDI library version 1.0.7
* Renamed chvar, selvar, delvar, showvar, setvar and splitvar
to chname, selname, delname, showname, setname and splitname
* Renamed nvar to npar and vardes to pardes
* Renamed selpctl to timselpctl
* Selstat: renamed to Timselstat
* Vertint: add support for LM VCT [request: Tanja Stanelle]
* Input: bug fix for missing values [report: Thomas Bruns]
* Merge: bug fix for files with constant fields only [report: Christian Rodehacke]
* expr.ex: bug fix for mixed time constant and variable fields
* Ymonstat: bug fix for missing values [report: Ivonne Anders]
* remapdis: bug fix if distance is zero
* remapcon: bug fix in intersection (s1 >= ZERO) [report: Joerg Wegner]
* remapcon: speed up by increasing BABY_STEP from 0.001 to 0.01
* interpolate: bug fix for north/south bounds > 90 or < -90 [report: Stefan Hagemann]
* gradsdes: bug fix for GRIB files with absolute path [report: Matthias Bchner]
* replace ztype2ltype by zaxis2ltype
* ltype2ztype: set default zaxis type to ZAXIS_GENERIC
* selltype, setltype, chltype: extent to all ltypes [request: Patrick Samuelsson]
* Add new operator: setrtoc and setrtoc2
* list.c: changes to accept inf and -inf as arguments
* New operator: timcount, hourcount, daycount, moncount, yearcount, seascount
* Renamed eca_fdns, eca_strwin, eca_strbre, eca_strgal, eca_hurr
* New operator: read_e5ini (test version)
* sinfo: print ltype for GRIB records on GENERIC zaxis
* fldmax: bug fix if all values < 0 and missvals [report: Karin Meier-Fleischer]
* vlistCompare: check grid orientation for func_sft
* gradsdes: set time increment to "mo" for monthly means
* gradsdes: process only the first 2GB of a GRIB file
* Version 1.0.7 released
* rename tchill to wct
* split eca_strwind into eca_strwin, eca_strbre, eca_strgal and eca_hurr
* New operator: vertvar, timvar, yearvar, monvar, dayvar, hourvar
* New operator: runvar, seasvar, selvar, ydayvar, ydrunvar, ymonvar, yseasvar
* New operator: selsmon [request: Claudia Wunram]
* remap: set norm_opt after read_remap_scrip (bug fix) [report: Andreas Sterl]
* cdo: FP_FAST_FMA bug fix [report: Sunpoet]
* New operator: showformat (Showinfo) [request: Helmuth Haak]
* remap: initialize links.option (bug fix) [report: Luis Kornblueh]
* update date/time conversion from udunits (bug fix) [report: Oliver Krueger]
* rotuvb: change coordinates to geographic (bug fix) [report: Klaus Wyser]
* Wind.c: define name, longname and units [report: Chiara Cagnazzo]
* add env CDO_DISABLE_HISTORY [request: Bjrge Solli]
* add env CDO_DISABLE_FILESUFFIX [request: Heiner Widmann]
* add suffix .sz for SZIP compressed files [request: Monika Esch]
* pstreamFindID: check pstreamptr->name before use (bug fix)
* operatorInqModID: speed up
* Version 1.0.5 released
* New module: Tchill (tchill)
* New module: Hi (hi)
* New module: ECA Indices of Daily Temperature and Precipitation Extremes
(eca_cfd, eca_csu, eca_cwdi, eca_cwfi, eca_etr, eca_fd,
eca_gsl, eca_hd, eca_hwdi, eca_hwfi, eca_id, eca_su,
eca_tg10p, eca_tg90p, eca_tn10p, eca_tn90p,
eca_tr, eca_tx10p, eca_tx90p,
eca_cdd, eca_cwd, eca_r10mm, eca_r20mm,
eca_r75p, eca_r75ptot, eca_r90p, eca_r90ptot,
eca_r95p, eca_r95ptot, eca_r99p, eca_r99ptot,
eca_rr1, eca_sdii, eca_fdns, eca_strwind)
* pstreamOpenRead: move mutex_unlock after cdoInqHistory
* Version 1.0.4 released
* New module: Ydrunstat (ydrun -min, -max, -sum, -mean, -avg, -std, -var)
* New module: Timpctl (tim-, hour-, day-, mon-, year- pctl)
* New module: Selpctl (selpctl)
* New module: Runpctl (runpctl)
* New module: Seaspctl (seaspctl)
* New module: Ydaypctl (ydaypctl)
* New module: Ymonpctl (ymonpctl)
* New module: Yseaspctl (yseaspctl)
* New module: Ydrunpctl (ydrunpctl)
* New operator: enspctl (Ensstat)
* New operator: fldpctl (Fldstat)
* New operator: zonpctl (Zonstat)
* New operator: merpctl (Merstat)
* New operator: intntime [request: Michael Boettinger]
* New operator: mrotuvb [request: Helmuth Haak]
* New operator: outputvector [request: Helmuth Haak]
* selyear: bug fix for years > 9999 [report: Uwe Mikolajewicz]
* inttime: extention for months and years [request: Holger Goettel]
* outputcenter: support of zonal and meridional fields
* zonavg: bug fix for non gaussian or non lonlat grids
* remaplib.sort_add: don't sort if num_links <= 1
* remaplib.remap_bi?: check that src_add is valid
* Remap: use REMAP_NON_GLOBAL only for gridsize > 1
* using CDI library version 1.0.2
* set alias gradsdes to gradsdes2
* rename gradsdes to gradsdes1
* New operator: int and nint (Math) [request: Joerg Wegner]
* New operator: ydaysum, ymonsum, yseassum [request: Hannes Reuter]
* add option -z szip to compress GRIB records with SZIP
* use DBL_IS_EQUAL to compare floating point
* remapbil, remapbic: improvement and speedup for regional lonlat grids
* Seltime: print warning message if parameter not found
* pstreamDefVlist: unpack netCDF data if datatype = FLT64
* Version 1.0.2 released
* using CDI library version 1.0.1
* add option -b to set the number of bits for the output precision
* seldate: use parameter - for min and max val
* seldate: change date format to YYYY-MM-DDThh:mm [request: Martina Stockhaus]
* New operator: selstdname, showstdname [request: Martina Stockhaus]
* New operator: setrcaname, seloperator for RCA GRIB datasets [Frida Brantvall]
* New operator: selltype, setltype, chltype, showltype [together with Frida Brantvall]
* New operator: setpartabv
* add new parameter table format
* fix problems on cygwin [report: Mark Hadfield]
* merge: move vlistDestroy after streamClose [report: Matthias Cuntz]
* gradsdes: fix bug for only one record without time [report: Angelika Heil]
* gradsdes: fix problem for variable names with - character
* New module: Setbox [Etienne Tourigny]
* history format changed to nco [Etienne Tourigny]
* process: set MAX_ARGS from 1024 to 8192
* Version 1.0.1 released
* using CDI library version 1.0.0
* New operator: dv2ps (Wind) [request: Luis Kornblueh]
* New module: Arithlat (mulcoslat, divcoslat) <- docu missing
* setreftime: use taxisDuplicate to copy bounds [report: Ivonne Anders]
* Seasstat: bug fix for datasets with only 1 season [report: Simon Blessing]
* Vertint: remove special treatment for geopoth
* configure: check compiler version
* Version 1.0.0 released
* New module: Mergetime [request: Stefanie Legutke]
* New operator: atan2 (Arith) [request: Tom Hardy]
* New operator: abs (Math) [request: Reiner Schnur]
* New module: Enlargegrid [request: Tom Hardy] <- docu missing
* New module: Input (input inputext inputsrv)
* Invert: fix memory release problem [report: Tom Hardy]
* setzaxis: set MAX_LINE_LEN from 1024 to 65536 [bug report: Martine Michou]
* enlarge: update for zonal and meridional data [request: Wolfgang Mueller]
* gradsdes: bug fix for unsorted GRIB data [report: Stefan Bauer]
* splitzaxis: generate file name from zaxisID+1 [bug report: Martina Stockhaus]
* splitgrid: generate file name from gridID+1
* Vardup: bug fix for missing values
* Timsort: bug fix for time constant fields
* Mastrfu: set units to [kg/s] [report: Rita Seiffert]
* Merstat: call gridWeights only if needed
* Vertint: use args2fltlist to read parameter list
* Splitrec: change record number from 5 to 6 digits
* Selbox, Maskbox, Mergegrid, Zonstat, Merstat: check number of different grids
* extent macro UNCHANGED_RECORD to cdoDefaultDataType and cdoDefaultByteorder
* pipeDefRecord, pstreamClose bug fix for seltimestep in pipes
* remove module docu from source code
* rename default grid name "ni" to "gme"
* rename operator intgrid to intgridbil
* add option -s for silent mode [request: Martina Stockhaus]
* New module: Histogram (histcount, histsum, histmean) <- docu missing
* Intgrid: missing value support for intgrid
* Cat: the output file must not exist anymore
* Zonstat: add support for GRID_GENERIC if ny > 1
* read_remap_scrip: if GME grid, read GME mask (bug report Luis)
* remaplib: change read/write of grid corners (bug fix)
* Spectral: rename sp2gp2/gp2sp2 to sp2gpl/gp2spl
* namelist: update
* Version 0.9.12 released
* use macro DBL_IS_EQUAL to check floating-point equality
* use taxisCopyTimestep if posible
* New operator: sp2gp2 (Spectral) for ERA40 data
* New operator: gp2sp2 (Spectral) for ERA40 data
* New operator: replace (Replace)
* New operator: specinfo to print info for spectral transformation
* New module: Selstat (selmin, selmax, selsum, selmean, selavg, selstd)
* New module: Mergegrid (mergegrid) <- docu missing
* Runstat: adjust date and time
* Merge: duplicate taxis (bug fix)
* Vertint: abort for different grids (bug fix)
Uwe Schulzweida
committed
* Gradsdes: set XYHEADER to 644 (bug report: Holger)
* Remap: add GME grid support
* Remap: use environment variable NORMLIZE_OPT (bug fix)
* Cat: set tsID2 to 1 for input files with constant data only
* zaxis: add vct support for hybrid levels
* remaplib: change max_subseg from 10000 to 100000
* Selrec: add IEG support
* Version 0.9.11 released
* using CDI library version 0.9.4
* IEG support
* New operator: ifthenelse (Cond2)
* Timer: option -T
* Gradsdes: IEG 32 support
* Selbox: add rotated grids
* Diff: change date and time format to ISO
Uwe Schulzweida
committed
* Gradsdes: bug fix for lonlat grids from N->S (report: Thibaut Gridel)
* Inttime: abort if units is not minutes, hours or days (bug fix)
* Settime: add all available calendars
* Inttime: add all available calendars
* fourier: made ifax and trig local (bug fix)
* Version 0.9.10 released
* using CDI library version 0.9.2
* remapcon: replace gridbox_area after remapping
* intgrid: init array2 with zero
* Timsort: OpenMP version
* gradsdes: bug fix for ZDEF
* pstream: mt safe
* New operator: gradsdes2 (Gradsdes)
* New module: Ensstat (ensmin ensmax enssum ensmean ensavg ensstd ensvar)
* New operator: remap (Remap)
* New operator: gencon (Remap)
* New operator: outputf (Output)
* New operator: enlarge (Enlarge)
* Arith: support of constant species
* zaxis: add bounds
* Version 0.9.9 released
* using CDI library version 0.9.1
* Arith:
- filling up 1. record or timestep of 1. or 2. stream if needed
* New operator: setlevel (Set)
* New operator: chlevel, chlevelv, chlevelc (Change)
* Inttime: change date and time format to ISO
* Cond: bug fix (change taxisID1 to taxisID2)
* Condc: bug fix (else if statemants)
* Compc: bug fix (else if statemants)
* Copy: bug fix (taxisID2)
* gridWeights: bug fix for non global gaussian grids
* replace args2intarr by args2intlist
* replace args2fltarr by args2fltlist
* Speedup remap and remapcon on NEC sx6
* Speedup spectral transformation (replace phcs by jspleg1)
* Version 0.9.8 released
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
* using CDI library version 0.9.0
* Speedup Remap with masks by saving MAX_REMAPS maps
* Speedup remapcon
- remap_conserv (change malloc to realloc)
- store_link_cnsrv (change search loop)
* Setmiss: setctomiss with NaN
* Info, Sinfo, Showinfo, Settime, Seltime: change date and time format to ISO
* New module: Maskbox (masklonlatbox, maskindexbox)
* New module: Arithdays (muldpm, divdpm, muldpy, divdpy)
* New operator: setcalendar (Settime)
* New operator: setgridarea (Setgrid)
* New operator: seltabnum (Select)
* Cond: bug fix (filling up the first file)
* setmissval: bug fix
* farstd, farcstd: bug fix (for missing values)
* gridWeights: calculate area weights for LONLAT grids
* rename Expr.c to Exprf.c
* change function cdoOperatorID
* field.h: bug fix for MUL with 0
* bug fix in all Modules (define timestep)
* Version 0.9.7 released
* using CDI library version 0.8.9
* support for rotated grids
* New module: Detrend (detrend)
* New module: Trend (trend)
* New module: Subtrend (subtrend)
* New module: Timsort (timsort)
* New module: Ydaystat (ydaymin, ydaymax, ydaymean, ydayavg, ydaystd)
* New module: Ymonarith (ymonadd, ymonsub, ymonmul, ymondiv)
* rename Lm* to Ymon* and Ls* to Yseas*
* Splityear: change filename for doubled years
* Version 0.9.6 released
* using CDI library version 0.8.8
* bug fix for taxis with remap, copy, setgrid
* New operator: shifttime (shift time steps)
* changing all integer level to floating point
* Vertint: check range of surface pressure
* Sinfo: print data type and file type
* Invert: extended for curivilinear grids
* pstream: add function pstreamInqFiletype
* Reduced grids: read/write record if -R is used
* Version 0.9.5 released
* using CDI library version 0.8.7
* New operator: setmissval (set the missing value)
* New operator: setpartab (set the parameter table)
* Docu for operator infov, sinfov and diffv
* Version 0.9.4 released
* changes for CDI library version 0.8.6
* New operator: gradsdes for GRIB, SERVICE and EXTRA files
* Setmiss: float (4 Byte reals) support
* Invert: bug fix
* Selbox: buf fix (add gridDefNvertex)
* grid.c: using grids from other datafile
* grid.c: generate grid from PINGO file
* fourier.c: multi threaded version of fft_set
* configure: checks for pthread and malloc library
* Version 0.9.3 released
* changes for CDI library version 0.8.5
* New module: Seasstat (seasmin, seasmax, seassum, seasmean, seasavg, seasstd)
* New module: Lsstat (lsmean, lsavg, lsmin, lsmax, lsstd)
* New operator: Selseas
* New operator: Splitseas
* Seldate: change parameter to start date and optional end date
* readline: add parameter max length
* grid.c: generate grid from CDI file
* remapcon: Bug fix for NORMALIZE_OPT and missing values
* pthread_create: check return value
* Version 0.9.2 released
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
* changes for CDI library version 0.8.4
* use compNlon to compute nlon from nlat
* pipeInqTimestep: Bug fix for Timstat in pipes
* Select: Print message if isel not found
* Timstat: add missing value support
* Runstat: add missing value support
* Lmstat: add missing value support
* Inttime: add missing value support
* Intyear: add missing value support
* Vertstat: add missing value support
* new operator: timmean, yearmean, monmean, daymean, hourmean
* new operator: runmean
* new operator: lmmean
* new operator: vertmean
* new operator: map (source code from PINGO)
* new operator: setreftime
* new operator: selrec
* new operator: splityear
* netCDF2 support
* Version 0.9.1 released
* changes for CDI library version 0.8.3
* new module: Vertint (ml2pl, ml2hl)
* new module: Outputgmt (outputcenter, outputbounds)
* new operator: settaxis, settunits
* Arith, Cond, Comp:
input stream2 can only have 1 record or 1 timestep
* Inttime: set ntsteps to 1 if ijulinc = 0
* Timstat: set ntsteps to 1 for tim*
* seltimestep: set ntsteps to 1 if nsel = 1
* replace all streamCopyRecord by streamReadRecord and streamWriteRecord for piping
* Version 0.9.0 released
* changes for CDI library version 0.8.2
* new module: Remap (remapcon, remapbil, remapbic, remapdis)
* new module: Setgatt (setgatt, setgatts)
* new module: Sort (sortcode, sortvar, sortlevel)
* new module: Writegrid
* new module: Vertstat (vertmin, vertmax, vertsum, vertavg, vertstd)
* new operator: delcode, delvar
* Timstat, Lmstat: use absolute timeaxis for output
* bug fix for use alias names in pipeline
* sellonlatbox: bug fix for selection out of bounds
* new option -v: Print extra details for some operators
* new option -R: Convert reduced to regular grid
* Version 0.8.9 released
* changes for CDI library version 0.8.1
* Timstat, Runstat, Lmstat: extended for variables with TIME_CONSTANT
* pipeDefTimestep: compute nrecs for TIME_VARIABLE
* Splittime: bug fix for splithour and splitmon
* new operator: chvar, setvar
* new module: Intyear
* Version 0.8.8 released
* changes for CDI library version 0.8.0
* Arith: new operator (min and max)
* Arith: extended for missing values
* Arithc: extended for missing values
* Selindexbox: extended for curivilinear grids
* new module: Fillmiss
* new module: Varrms
* new module: Fldrms
* new module: Setgridtype
* bug fix: setmisstoc
* bug fix: Change, Set, Settime - change copy to read/write
* Version 0.8.7 released
* changes for CDI library version 0.7.9
* change format for online help information
* new module: Change (chcode)
* new module: Set (setcode)
* new module: Settime (setdate, settime, setyear, setmon, setday)
* new module: Runstat (runmin, runmax, runsum, runavg, runstd)
* new module: Merstat (mermin, mermax, mersum, meravg, mermean, mervar, merstd)
* new module: Zonstat (zonmin, zonmax, zonsum, zonavg, zonmean, zonvar, zonstd)
* new module: Fldstat (fldmin, fldmax, fldsum, fldavg, fldmean, fldvar, fldstd)
* new module: Cond (ifthen, ifnotthen)
* new module: Condc (ifthenc, ifnotthenc)
* Select: select float levels instead of integer
* Infos: rename infos to sinfo and vinfo to infov
* Timstat: bug fix (calculate timerange)
* Version 0.8.6 released
* changes for CDI library version 0.7.8
* New module: Cat (cat)
* New module: Selbox (selindexbox, sellonlatbox)
* New module: Merge (merge)
* New module: Output (output, outputint, outputsrv, outputext)
* New module: Genvar (random, const)
* New module: Arithconst (addc, subc, mulc, divc)
* New module: Math (sqr sqrt exp log log10 sin cos tan asin acos atan)
* New module: Ninfo (nyear nmon ndate ntime ncode nvar nlevel)
* New module: Showinfo (showyear showmon showdate showtime showcode showvar showlevel)
* gridFromName: add default grid name r<LON>x<LAT>
* Copy: changed from one to unlimited inputfiles
* Split: bug fix for splitcode
* Version 0.8.5 released
* changes for CDI library version 0.7.7
* pipe bug fix
* New module: Lmstat (lmean, lmavg, lmmin, lmmax, lmstd)
* New module: Splitrec
* Version 0.8.4 released
* changes for CDI library version 0.7.5
* Version 0.8.3 released
* changes for CDI library version 0.7.4
* changes for CDI library version 0.7.2 (HDF test interface)
* New operator: intarea, setctomiss, setmisstoc, setrangetomiss
* Version 0.8.2 released
* New operator: interpolate (source from PINGO)
* Version 0.8.1 released
* renamed to CDO (Climate Data Operators)
* changes for CDI library version 0.7.0
* replace info with vlist
* New operator: splithour, splitday, splitmon
* Version 0.8.0 released
* changes for gdi library version 0.6.0
* Info.c: handle missing values
* Version 0.7.0 released
* gdi library version 0.5.11
* New operator: intgridtraj, mastrfu
* Version 0.6.4 released
* New operator: intgrid, intpoint, inttime
* Version 0.6.3 released
* gdi library version 0.5.9
* grib library version 0.4.5
* Version 0.6.2 released
* add module Spectral with operator sp2gp, gp2sp and sp2sp
* Version 0.6.1 released