Newer
Older
#'Plot one or multiple ensemble forecast pdfs for the same event
#'
Llorenç Lledó
committed
#'@author Llorenç Lledó \email{llledo@bsc.es}
#'@description This function plots the probability distribution function of several ensemble forecasts. Separate panels are used to plot forecasts valid or initialized at different times or by different models or even at different locations. Probabilities for tercile categories are computed, plotted in colors and annotated. An asterisk marks the tercile with higher probabilities. Probabilities for extreme categories (above P90 and below P10) can also be included as hatched areas. Individual ensemble members can be plotted as jittered points. The observed value is optionally shown as a diamond.
#'@param fcst a dataframe or array containing all the ensember members for each forecast. If \code{'fcst'} is an array, it should have two labelled dimensions, and one of them should be \code{'members'}. If \code{'fcsts'} is a data.frame, each column shoul be a separate forecast, with the rows beeing the different ensemble members.
#'@param tercile.limits an array or vector with P33 and P66 values that define the tercile categories for each panel. Use an array of dimensions (nforecasts,2) to define different terciles for each forecast panel, or a vector with two elements to reuse the same tercile limits for all forecast panels.
#'@param extreme.limits (optional) an array or vector with P10 and P90 values that define the extreme categories for each panel. Use an array of (nforecasts,2) to define different extreme limits for each forecast panel, or a vector with two elements to reuse the same tercile limits for all forecast panels. (Default: extreme categories are not shown).
#'@param obs (optional) A vector providing the observed values for each forecast panel or a single value that will be reused for all forecast panels. (Default: observation is not shown).
#'@param plotfile (optional) a filename (pdf, png...) where the plot will be saved. (Default: the plot is not saved).
#'@param title a string with the plot title.
#'@param var.name a string with the variable name and units.
#'@param fcst.names (optional) an array of strings with the titles of each individual forecast.
#'@param add.ensmemb either to add the ensemble members \code{'above'} (default) or \code{'below'} the pdf, or not (\code{'no'}).
#'@param color.set a selection of predefined color sets: use \code{'ggplot'} (default) for blue/green/red, \code{'s2s4e'} for blue/grey/orange, or \code{'hydro'} for yellow/gray/blue (suitable for precipitation and inflows).
#'
#'@return a ggplot object containing the plot.
#'
#'@importFrom data.table data.table
#'@importFrom data.table CJ
#'@importFrom data.table setkey
#'@importFrom reshape2 melt
#'@importFrom plyr .
#'@importFrom plyr dlply
#'@import s2dverification
#'fcsts <- data.frame(fcst1 = rnorm(10), fcst2 = rnorm(10, 0.5, 1.2),
#' fcst3 = rnorm(10, -0.5, 0.9))
#'fcsts2 <- array(rnorm(100), dim = c(members = 20, fcst = 5))
#'PlotForecastPDF(fcsts2, c(-0.66, 0.66), extreme.limits = c(-1.2, 1.2),
#' fcst.names = paste0('random fcst ', 1 : 5), obs = 0.7)
PlotForecastPDF <- function(fcst, tercile.limits, extreme.limits = NULL, obs = NULL,
plotfile = NULL, title = "Set a title", var.name = "Varname (units)", fcst.names = NULL,
add.ensmemb = c("above", "below", "no"), color.set = c("ggplot", "s2s4e", "hydro")) {
value <- init <- extremes <- x <- ymin <- ymax <- tercile <- NULL
y <- xend <- yend <- yjitter <- MLT <- lab.pos <- NULL
ggColorHue <- function(n) {
hues <- seq(15, 375, length = n + 1)
hcl(h = hues, l = 65, c = 100)[1:n]
}
#------------------------
# Define color sets
#------------------------
if (color.set == "s2s4e") {
colorFill <- rev(c("#FF764D", "#b5b5b5", "#33BFD1"))
colorHatch <- c("deepskyblue3", "indianred3")
colorMember <- c("#ffff7f")
colorObs <- "purple"
colorLab <- c("blue", "red")
} else if (color.set == "hydro") {
colorFill <- rev(c("#41CBC9", "#b5b5b5", "#FFAB38"))
colorHatch <- c("darkorange1", "deepskyblue3")
colorMember <- c("#ffff7f")
colorObs <- "purple"
colorLab <- c("darkorange3", "blue")
} else if (color.set == "ggplot") {
colorFill <- rev(ggColorHue(3))
colorHatch <- c("deepskyblue3", "indianred1")
colorMember <- c("#ffff7f")
colorObs <- "purple"
colorLab <- c("blue", "red")
} else {
stop("Parameter 'color.set' should be one of ggplot/s2s4e/hydro")
}
#------------------------
# Check input arguments
#------------------------
#------------------------
# Check fcst type and convert to data.frame if needed
#------------------------
if (is.array(fcst)) {
if (!"members" %in% names(dim(fcst)) | length(dim(fcst)) != 2) {
stop("Parameter 'fcst' should be a two-dimensional array with labelled dimensions and one of them should be 'members'")
}
dim.members <- which(names(dim(fcst)) == "members")
if (dim.members == 1) {
fcst.df <- data.frame(fcst)
} else {
fcst.df <- data.frame(t(fcst))
}
} else if (is.data.frame(fcst)) {
fcst.df <- fcst
} else {
stop("Parameter 'fcst' should be an array or a data.frame")
Francesc Roura Adserias
committed
npanels <- ncol(fcst.df)
#------------------------
# Check observations
#------------------------
if (!is.null(obs)) {
if (!is.vector(obs)){
stop("Observations should be a vector")
} else if (!length(obs) %in% c(1, npanels)) {
stop("The number of observations should equal one or the number of forecasts")
Francesc Roura Adserias
committed
}
}
#------------------------
Francesc Roura Adserias
committed
# Check tercile limits
#------------------------
FRANCESC ROURA ADSERIAS
committed
if (is.vector(tercile.limits)) {
if (length(tercile.limits) != 2) {
FRANCESC ROURA ADSERIAS
committed
}
tercile.limits <- InsertDim(tercile.limits, 1, npanels)
FRANCESC ROURA ADSERIAS
committed
} else if (is.array(tercile.limits)) {
if (length(dim(tercile.limits)) == 2) {
if (dim(tercile.limits)[2] != 2) {
stop("Provide two tercile limits for each panel")
}
if (dim(tercile.limits)[1] != npanels) {
stop("The number of tercile limits does not match the number of forecasts provided")
}
FRANCESC ROURA ADSERIAS
committed
} else {
stop("Tercile limits should have two dimensions")
Francesc Roura Adserias
committed
} else {
FRANCESC ROURA ADSERIAS
committed
stop("Tercile limits should be a vector of length two or an array of dimension (nfcsts,2)")
Francesc Roura Adserias
committed
}
# check consistency of tercile limits
if (any(tercile.limits[, 1] >= tercile.limits[, 2])) {
Francesc Roura Adserias
committed
stop("Inconsistent tercile limits")
}
#------------------------
# Check extreme limits
#------------------------
if (!is.null(extreme.limits)) {
FRANCESC ROURA ADSERIAS
committed
if (is.vector(extreme.limits)) {
if (length(extreme.limits) != 2) {
stop("Provide two extreme limits")
FRANCESC ROURA ADSERIAS
committed
}
extreme.limits <- InsertDim(extreme.limits, 1, npanels)
FRANCESC ROURA ADSERIAS
committed
} else if (is.array(extreme.limits)) {
if (length(dim(extreme.limits)) == 2) {
if (dim(extreme.limits)[2] != 2) {
stop("Provide two extreme limits for each panel")
}
if (dim(extreme.limits)[1] != npanels) {
stop("The number of extreme limits does not match the number of forecasts provided")
}
} else {
stop("extreme limits should have two dimensions")
}
} else {
stop("Extreme limits should be a vector of length two or an array of dimensions (nfcsts,2)")
}
# Check that extreme limits are consistent with tercile limits
if (any(extreme.limits[, 1] >= tercile.limits[, 1])) {
FRANCESC ROURA ADSERIAS
committed
stop("Inconsistent lower extreme limits")
}
if (any(extreme.limits[, 2] <= tercile.limits[, 2])) {
Francesc Roura Adserias
committed
stop("Inconsistent higher extreme limits")
}
}
#------------------------
# Set proper fcst names
#------------------------
if (!is.null(fcst.names)) {
if (length(fcst.names) != dim(fcst.df)[2]) {
stop("Parameter 'fcst.names' should be an array with as many names as distinct forecasts provided")
}
colnames(fcst.df) <- factor(fcst.names, levels = fcst.names)
#------------------------
# Produce a first plot with the pdf for each init in a panel
#------------------------
melt.df <- melt(fcst.df, variable.name = "init", id.vars = NULL)
plot <- ggplot(melt.df, aes(x = value)) + geom_density(alpha = 1, na.rm = T) +
coord_flip() + facet_wrap(~init, strip.position = "top", nrow = 1) + xlim(range(c(obs,
density(melt.df$value, na.rm = T)$x)))
ggp <- ggplot_build(plot)
#------------------------
# Gather the coordinates of the plots together with init and corresponding
# terciles
#------------------------
tmp.df <- ggp$data[[1]][, c("x", "ymin", "ymax", "PANEL")]
if (!is.null(ggp$layout$layout)) {
tmp.df$init <- ggp$layout$layout$init[as.numeric(tmp.df$PANEL)]
} else if (!is.null(ggp$layout$panel_layout)) {
tmp.df$init <- ggp$layout$panel_layout$init[as.numeric(tmp.df$PANEL)]
stop("Cannot find PANELS in ggp object")
}
tmp.df$tercile <- factor(ifelse(tmp.df$x < tercile.limits[tmp.df$PANEL, 1], "Below normal",
ifelse(tmp.df$x < tercile.limits[tmp.df$PANEL, 2], "Normal", "Above normal")), levels = c("Below normal",
"Normal", "Above normal"))
#------------------------
# Get the height and width of a panel
#------------------------
pan.width <- diff(range(tmp.df$x))
pan.height <- max(tmp.df$ymax)
magic.ratio <- 9 * pan.height/pan.width
#------------------------
# Compute hatch coordinates for extremes
#------------------------
Francesc Roura Adserias
committed
if (!is.null(extreme.limits)) {
tmp.df$extremes <- factor(ifelse(tmp.df$x < extreme.limits[tmp.df$PANEL, 1], "Below P10",
ifelse(tmp.df$x < extreme.limits[tmp.df$PANEL, 2], "Normal", "Above P90")), levels = c("Below P10",
"Normal", "Above P90"))
hatch.ls <- dlply(tmp.df, .(init, extremes), function(x) {
# close the polygon
tmp.df2 <- data.frame(x = c(x$x, max(x$x), min(x$x)), y = c(x$ymax, 0,
0))
# compute the hatches for this polygon
hatches <- .polygon.fullhatch(tmp.df2$x, tmp.df2$y, angle = 60, density = 10,
width.units = pan.width, height.units = pan.height)
# add bottom segment
end1 <- data.frame(x = x$x[1], y = x$ymax[1], xend = x$x[1], yend = 0)
# add top segment
end2 <- data.frame(x = x$x[length(x$x)], y = x$ymax[length(x$x)], xend = x$x[length(x$x)],
yend = 0)
return(rbind(hatches, end1, end2))
})
attr <- attr(hatch.ls, "split_labels")
for (i in 1:length(hatch.ls)) {
Llorenç Lledó
committed
hatch.ls[[i]] <- cbind(hatch.ls[[i]], attr[i, ], row.names = NULL)
}
hatch.df <- do.call("rbind", hatch.ls)
# Compute max y for each extreme category
max.ls <- dlply(tmp.df, .(init, extremes), function(x) {
data.frame(y = min(0.85 * pan.height, max(x$ymax)))
})
attr <- attr(max.ls, "split_labels")
for (i in 1:length(max.ls)) {
Llorenç Lledó
committed
max.ls[[i]] <- cbind(max.ls[[i]], attr[i, ], row.names = NULL)
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
}
max.df <- do.call("rbind", max.ls)
}
#------------------------
# Compute jitter space for ensemble members
#------------------------
if (add.ensmemb != "no") {
jitter.df <- melt(data.frame(dlply(melt.df, .(init), function(x) {
.jitter.ensmemb(sort(x$value, na.last = T), pan.width/100)
}), check.names = F), value.name = "yjitter", variable.name = "init", id.vars = NULL)
jitter.df$x <- melt(data.frame(dlply(melt.df, .(init), function(x) {
sort(x$value, na.last = T)
})), value.name = "x", id.vars = NULL)$x
}
#------------------------
# Get y coordinates for observed x values, using a cool data.table feature: merge
# to nearest value
#------------------------
if (!is.null(obs)) {
tmp.dt <- data.table(tmp.df, key = c("init", "x"))
obs.dt <- data.table(init = factor(colnames(fcst.df), levels = colnames(fcst.df)),
value = rep(obs, dim(fcst.df)[2]))
setkey(obs.dt, init, value)
obs.xy <- tmp.dt[obs.dt, roll = "nearest"]
}
#------------------------
# Fill each pdf with different colors for the terciles
#------------------------
plot <- plot + geom_ribbon(data = tmp.df, aes(x = x, ymin = ymin, ymax = ymax,
fill = tercile), alpha = 0.7)
#------------------------
# Add hatches for extremes
#------------------------
if (!is.null(extreme.limits)) {
if (nrow(hatch.df[hatch.df$extremes != "Normal", ]) == 0) {
warning("The provided extreme categories are outside the plot bounds. The extremes will not be drawn.")
extreme.limits <- NULL
} else {
plot <- plot + geom_segment(data = hatch.df[hatch.df$extremes != "Normal",
], aes(x = x, y = y, xend = xend, yend = yend, color = extremes))
}
#------------------------
# Add obs line
#------------------------
if (!is.null(obs)) {
plot <- plot + geom_vline(data = obs.dt, aes(xintercept = value), linetype = "dashed",
color = colorObs)
Llorenç Lledó
committed
}
#------------------------
# Add ensemble members
#------------------------
if (add.ensmemb == "below") {
plot <- plot + # this adds a grey box for ensmembers
geom_rect(aes(xmin = -Inf, xmax = Inf, ymin = -Inf, ymax = -pan.height/10),
fill = "gray95", color = "black", width = 0.2) + # this adds the ensemble members
geom_point(data = jitter.df, color = "black", fill = colorMember, alpha = 1,
aes(x = x, y = -pan.height/10 - magic.ratio * yjitter, shape = "Ensemble members"))
} else if (add.ensmemb == "above") {
plot <- plot + geom_point(data = jitter.df, color = "black", fill = colorMember,
alpha = 1, aes(x = x, y = 0.7 * magic.ratio * yjitter, shape = "Ensemble members"))
#------------------------
# Add obs diamond
#------------------------
if (!is.null(obs)) {
plot <- plot + # this adds the obs diamond
geom_point(data = obs.xy, aes(x = x, y = ymax, size = "Observation"), shape = 23,
color = "black", fill = colorObs)
#------------------------
# Compute probability for each tercile and identify MLT
#------------------------
tmp.dt <- data.table(tmp.df)
pct <- tmp.dt[, .(pct = integrate(approxfun(x, ymax), lower = min(x), upper = max(x))$value),
by = .(init, tercile)]
#------------------------
# check number of probabilities = 3*npanels
#------------------------
if (dim(pct)[1] %% 3 !=0){
warning("There is not a percentage computed for every tercile cathegory")
dmy.i <- which(as.numeric(summary(pct$init)) == min(as.numeric(summary(pct$init))))
init <- levels(factor(pct$init))[dmy.i]
dmy.t <- which(as.numeric(summary(pct$tercile)) == min(as.numeric(summary(pct$tercile))))
terc <- levels(factor(pct$tercile))[dmy.t]
aux1 <- append(array(pct$init),init,after=0)
aux2 <- append(array(pct$tercile),terc,after=0)
aux3 <- append(array(pct$pct),rep(0.00001,length(terc)),after=0)
pct <- data.frame(init=aux1,tercile=aux2,pct=aux3)
pct <- as.data.table(pct)
}
tot <- pct[, .(tot = sum(pct)), by = init]
pct <- merge(pct, tot, by = "init")
pct$pct <- round(100 * pct$pct/pct$tot, 0)
pct$MLT <- pct[, .(MLT = pct == max(pct)), by = init]$MLT
pct$lab.pos <- as.vector(apply(tercile.limits, 1, function(x) {c(min(x), mean(x), max(x))}))
if(min(pct$lab.pos) < min(tmp.df$x)){
pct$lab.pos[which(pct$lab.pos < min(tmp.dt$x))] <- min(tmp.df$x)
}
#------------------------
# Compute probability for extremes
#------------------------
if (!is.null(extreme.limits)) {
pct2 <- tmp.dt[, .(pct = integrate(approxfun(x, ymax), lower = min(x), upper = max(x))$value),
by = .(init, extremes)]
tot2 <- pct2[, .(tot = sum(pct)), by = init]
pct2 <- merge(pct2, tot2, by = "init")
pct2$pct <- round(100 * pct2$pct/pct2$tot, 0)
pct2$lab.pos <- as.vector(apply(extreme.limits, 1, function(x) {c(x[1], NA, x[2])}))
pct2 <- merge(pct2, max.df, by = c("init", "extremes"))
# include potentially missing groups
Llorenç Lledó
committed
pct2 <- pct2[CJ(factor(levels(pct2$init), levels = levels(pct2$init)),
factor(c("Below P10", "Normal", "Above P90"),
levels = c("Below P10", "Normal", "Above P90"))), ]
}
#------------------------
# Add probability labels for terciles
#------------------------
if (add.ensmemb == "above") {
labpos <- -0.2 * pan.height
vjust <- 0
labpos <- 0
vjust <- -0.5
}
plot <- plot + geom_text(data = pct, aes(x = lab.pos, y = labpos,
label = paste0(pct, "%"), hjust = as.integer(tercile) * 1.5 - 2.5), vjust = vjust,
angle = -90, size = 3.2) + geom_text(data = pct[MLT == T, ], aes(x = lab.pos,
y = labpos, label = "*", hjust = as.integer(tercile) * 3.5 - 5), vjust = 0.1,
angle = -90, size = 7, color = "black")
#------------------------
# Add probability labels for extremes
#------------------------
if (!is.null(extreme.limits)) {
plot <- plot + geom_text(data = pct2[extremes != "Normal", ], aes(x = lab.pos,
y = 0.9 * y, label = paste0(pct, "%"), hjust = as.integer(extremes) *
1.5 - 2.5), vjust = -0.5, angle = -90, size = 3.2, color = rep(colorLab,
dim(fcst.df)[2]))
#------------------------
# Finish all theme and legend details
#------------------------
plot <- plot + theme_minimal() + scale_fill_manual(name = "Probability of\nterciles",
breaks = c("Above normal", "Normal", "Below normal"), values = colorFill,
drop = F) + scale_color_manual(name = "Probability of\nextremes", values = colorHatch) +
scale_shape_manual(name = "Ensemble\nmembers", values = c(21)) + scale_size_manual(name = "Observation",
values = c(3)) + labs(x = var.name, y = "Probability density\n(total area=1)",
title = title) + theme(axis.text.x = element_blank(), panel.grid.minor.x = element_blank(),
legend.key.size = unit(0.3, "in"), panel.border = element_rect(fill = NA,
color = "black"), strip.background = element_rect(colour = "black", fill = "gray80"),
panel.spacing = unit(0.2, "in"), panel.grid.major.x = element_line(color = "grey93")) +
guides(fill = guide_legend(order = 1), color = guide_legend(order = 2, reverse = T),
shape = guide_legend(order = 3, label = F), size = guide_legend(order = 4,
label = F))
#------------------------
# Save to plotfile if needed, and return plot
#------------------------
if (!is.null(plotfile)) {
ggsave(plotfile, plot)
}
return(plot)
.jitter.ensmemb <- function(x, thr = 0.1) {
# Idea: start with first level. Loop all points, and if distance to last point in
# the level is more than a threshold, include the point to the level. Otherwise
# keep the point for another round. Do one round in each direction to avoid
# uggly patterns.
if (is.unsorted(x, na.rm = T)) {
stop("Provide a sorted array!")
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
lev <- x * 0
lev[is.na(lev)] <- -1
level <- 1
while (any(lev == 0)) {
last <- -1/0
for (i in 1:length(x)) {
if (lev[i] != 0) {
next
}
if (x[i] - last > thr) {
lev[i] <- level
last <- x[i]
}
}
level <- level + 1
last <- 1/0
for (i in seq(length(x), 1, -1)) {
if (lev[i] != 0) {
next
}
if (last - x[i] > thr) {
lev[i] <- level
last <- x[i]
}
}
level <- level + 1
lev[lev == -1] <- NA
return(lev * thr * sqrt(3)/2)
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
.polygon.onehatch <- function(x, y, x0, y0, xd, yd, fillOddEven = F) {
halfplane <- as.integer(xd * (y - y0) - yd * (x - x0) <= 0)
cross <- halfplane[-1L] - halfplane[-length(halfplane)]
does.cross <- cross != 0
if (!any(does.cross)) {
return()
}
x1 <- x[-length(x)][does.cross]
y1 <- y[-length(y)][does.cross]
x2 <- x[-1L][does.cross]
y2 <- y[-1L][does.cross]
t <- (((x1 - x0) * (y2 - y1) - (y1 - y0) * (x2 - x1))/(xd * (y2 - y1) - yd *
(x2 - x1)))
o <- order(t)
tsort <- t[o]
crossings <- cumsum(cross[does.cross][o])
if (fillOddEven) {
crossings <- crossings%%2
}
drawline <- crossings != 0
lx <- x0 + xd * tsort
ly <- y0 + yd * tsort
lx1 <- lx[-length(lx)][drawline]
ly1 <- ly[-length(ly)][drawline]
lx2 <- lx[-1L][drawline]
ly2 <- ly[-1L][drawline]
return(data.frame(x = lx1, y = ly1, xend = lx2, yend = ly2))
.polygon.fullhatch <- function(x, y, density, angle, width.units, height.units, inches = c(5,
1)) {
x <- c(x, x[1L])
y <- c(y, y[1L])
angle <- angle%%180
upi <- c(width.units, height.units)/inches
if (upi[1L] < 0) {
angle <- 180 - angle
if (upi[2L] < 0) {
angle <- 180 - angle
upi <- abs(upi)
xd <- cos(angle/180 * pi) * upi[1L]
yd <- sin(angle/180 * pi) * upi[2L]
hatch.ls <- list()
i <- 1
if (angle < 45 || angle > 135) {
if (angle < 45) {
first.x <- max(x)
last.x <- min(x)
} else {
first.x <- min(x)
last.x <- max(x)
}
y.shift <- upi[2L]/density/abs(cos(angle/180 * pi))
x0 <- 0
y0 <- floor((min(y) - first.x * yd/xd)/y.shift) * y.shift
y.end <- max(y) - last.x * yd/xd
while (y0 < y.end) {
hatch.ls[[i]] <- .polygon.onehatch(x, y, x0, y0, xd, yd)
i <- i + 1
y0 <- y0 + y.shift
}
if (angle < 90) {
first.y <- max(y)
last.y <- min(y)
} else {
first.y <- min(y)
last.y <- max(y)
}
x.shift <- upi[1L]/density/abs(sin(angle/180 * pi))
x0 <- floor((min(x) - first.y * xd/yd)/x.shift) * x.shift
y0 <- 0
x.end <- max(x) - last.y * xd/yd
while (x0 < x.end) {
hatch.ls[[i]] <- .polygon.onehatch(x, y, x0, y0, xd, yd)
i <- i + 1
x0 <- x0 + x.shift
}
return(do.call("rbind", hatch.ls))