NEWS

    managed. Substantially improves performance for large numbers of tasks.
    Adds support for SLURM_PMI_KVS_NO_DUP_KEYS environment variable. Patch
    from Hongjia Cao, NUDT.
 -- Fix issues with sview dealing with older versions of sview and saving
    defaults.
 -- Remove references to --mincores, --minsockets, and --minthreads from the
    salloc, sbatch and srun man pages. These options are defunct, Patch from
    Rod Schultz, Bull.
 -- Made openssl not be required to build RPMs, it is not required anymore
    since munge is the default crypto plugin.
 -- sacctmgr now has smarts to figure out if a qos is a default qos when
    modifing a user/acct or removing a qos.
 -- For reservations on BlueGene systems, set and report c-node counts rather
    than midplane counts.

* Changes in SLURM 2.2.0.rc1
============================
 -- Add show_flags parameter to the slurm_load_block_info() function.
 -- perlapi has been brought up to speed courtesy of Hongjia Coa. (make sure to
    run 'make clean' if building in a different dir than source)
 -- Fixed regression in pre12 in crypto/munge when running with
    --enable-multiple-slurmd which would cause the slurmd's to core.
 -- Fixed regression where cpu count wasn't figured out correctly for steps.
 -- Fixed issue when using old mysql that can't handle a '.' in the table
    name.
 -- Mysql plugin works correctly without the SlurmDBD
 -- Added ability to query batch step with sstat.  Currently no accounting data
    is stored for the batch step, but the internals are inplace if we decide to
    do that in the future.
 -- Fixed some backwards compatibility issues with 2.2 talking to 2.1.
 -- Fixed regression where modifying associations didn't get sent to the
    slurmctld.
 -- Made sshare sort things the same way saccmgr list assoc does
    (alphabetically)
 -- Fixed issue with default accounts being set up correctly.
 -- Changed sortting in the slurmctld so sshare output is similar to that of
    sacctmgr list assoc.
 -- Modify reservation logic so that daily and weekly reservations maintain
    the same time when daylight savings time starts or ends in the interim.
 -- Edit to make reservations handle updates to associations.
 -- Added the derived exit code to the slurmctld job record and the derived
    exit code and string to the job record in the SLURM db.
 -- Added slurm-sjobexit RPM for SLURM job exit code management tools.
 -- Added ability to use sstat/sacct against the batch step.
 -- Added OnlyDefaults option to sacctmgr list associations.
 -- Modified the fairshare priority formula to F = 2**(-Ue/S)
 -- Modify the PMI functions key-pair exchange function to support a 32-bit
    counter for larger job sizes. Patch from Hongjia Cao, NUDT.
 -- In sched/builtin - Make the estimated job start time logic faster (borrowed
    new logic from sched/backfill and added pthread) and more accurate.
 -- In select/cons_res fix bug that could result in a job being allocated zero
    CPUs on some nodes. Patch from Hongjia Cao, NUDT.
 -- Fix bug in sched/backfill that could set expected start time of a job too
    far in the future.
 -- Added ability to enforce new limits given to associations/qos on
    pending jobs.
 -- Increase max message size for the slurmdbd from 1000000 to 16*1024*1024
 -- Increase number of active threads in the slurmdbd from 50 to 100
 -- Fixed small bug in src/common/slurmdb_defs.c reported by Bjorn-Helge Mevik
 -- Fixed sacctmgr's ability to query associations against qos again.
 -- Fixed sview show config on non-bluegene systems.
 -- Fixed bug in selecting jobs based on sacct -N option
 -- Fix bug that prevented job Epilog from running more than once on a node if
    a job was requeued and started no job steps.
 -- Fixed issue where node index wasn't stored correcting when using DBD.
 -- Enable srun's use of the --nodes option with --exclusive (previously the
    --nodes option was ignored).
 -- Added UsageThreshold and Flags to the QOS object.
 -- Patch to improve threadsafeness in the mysql plugins.
 -- Add support for fair-share scheduling to be based upon resource use at
    the level of bank accounts and ignore use of individual users. Patch by
    Par Andersson, National Supercomputer Centre, Sweden.

* Changes in SLURM 2.2.0.pre12
==============================
 -- Log if Prolog or Epilog run for longer than MessageTimeout / 2.
 -- Log the RPC number associated with messages from slurmctld that timeout.
 -- Fix bug in select/cons_res logic when job allocation includes --overcommit
    and --ntasks-per-node options and the node has fewer CPUs than the count
    specified by --ntasks-per-node.
 -- Fix bug in gang scheduling and job preemption logic so that preempted jobs
    get resumed properly after a slurmctld hot-start.
 -- Fix bug in select/linear handling of gang scheduled jobs that could result
    in run_job_cnt underflow error message.
 -- Fix bug in gang scheduling logic to properly support partitions added
    using the scontrol command.
 -- Fix a segmentation fault in sview where the 'excluded_partitions' field
    was set to NULL, caused by the absence of ~/.slurm/sviewrc.
 -- Rewrote some calls to is_user_any_coord() in src/plugins/accounting_storage
    modules to make use of is_user_any_coord()'s return value.
 -- Add configure option of --with=dimensions=#.
 -- Modify srun ping logic so that srun would only be considered not responsive
    if three ping messages were not responded to. Patch from Hongjia Cao (NUDT).
 -- Preserve a node's ReasonTime field after scontrol reconfig command. Patch
    from Hongjia Cao (NUDT).
 -- Added the authority for users with AdminLevel's defined in the SLURM db
    (Operators and Admins) and account coordinators to invoke commands that
    affect jobs, reservations, nodes, etc.
 -- Fix for slurmd restart on completing node with no tasks to get the correct
    state, completing. Patch from Hongjia Cao (NUDT).
 -- Prevent scontrol setting a node's Reason="". Patch from Hongjia Cao (NUDT).
 -- Add new functions hostlist_ranged_string_malloc,
    hostlist_ranged_string_xmalloc, hostlist_deranged_string_malloc, and
    hostlist_deranged_string_xmalloc which will allocate memory as needed.
 -- Make the slurm commands support both the --cluster and --clusters option.
    Previously, some commands support one of those options, but not the other.
 -- Fix bug when resizing a job that has steps running on some of those nodes.
    Avoid killing the job step on remaining nodes. Patch from Rod Schultz
    (BULL). Also fix bug related to tracking the CPUs allocated to job steps
    on each node after releasing some nodes from the job's allocation.
 -- Applied patch from Rod Schultz / Matthieu Hautreux to keep the Node-to-Host
    cache from becoming corrupted when a hostname cannot be resolved.
 -- Export more symbols in libslurm for job and node state information
    translation (numbers to strings). Patch from Hongia Cao, NUDT.
 -- Add logic to retry sending RESPONSE_LAUNCH_TASKS messages from slurmd to
    srun. Patch from Hongia Cao, NUDT.
 -- Modify bit_unfmt_hexmask() and bit_unfmt_binmask() functions to clear the
    bitmap input before setting the bits indicated in the input string.
 -- Add SchedulerParameters option of bf_window to control how far into the
    future that the backfill scheduler will look when considering jobs to start.
    The default value is one day. See "man slurm.conf" for details.
 -- Fix bug that can result in duplicate job termination records in accounting
    for job termination when slurmctld restarts or reconfigures.
 -- Modify plugin and library logic as needed to support use of the function
    slurm_job_step_stat() from user commands.
 -- Fix race condition in which PrologSlurmctld failure could cause slurmctld
    to abort.
 -- Fix bug preventing users in secondary user groups from being granted access
    to partitions configured with AllowGroups.
 -- Added support for a default account and wckey per cluster within accounting.
 -- Modified select/cons_res plugin so that if MaxMemPerCPU is configured and a
    job specifies it's memory requirement, then more CPUs than requested will
    automatically be allocated to a job to honor the MaxMemPerCPU parameter.
 -- Added the derived_ec (exit_code) member to job_info_t.  exit_code captures
    the exit code of the job script (or salloc) while derived_ec contains the
    highest exit code of all the job steps.
 -- Added SLURM_JOB_EXIT_CODE and SLURM_JOB_DERIVED_EC variables to the
    EpilogSlurmctld environment
 -- More work done on the accounting_storage/pgsql plugin, still beta.
    Patch from Hongjia Cao (NUDT).
 -- Major updates to sview from Dan Rusak (Bull), including:
    - Persistent option selections for each tab page
    - Clean up topology in grids
    - Leverage AllowGroups and Hidden options
    - Cascade full-info popups for ease of selection
 -- Add locks around the MySQL calls for proper operation if the non-thread
    safe version of the MySQL library is used.
 -- Remove libslurm.a, libpmi.a and libslurmdb.a from SLURM RPM. These static
    libraries are not generally usable.
 -- Fixed bug in sacctmgr when zeroing raw usage reported by Gerrit Renker.

* Changes in SLURM 2.2.0.pre11
==============================
 -- Permit a regular user to change the partition of a pending job.
 -- Major re-write of the job_submit/lua plugin to pass pointers to available
    partitions and use lua metatables to reference the job and partition fields.
 -- Add support for serveral new trigger types: SlurmDBD failure/restart,
    Database failure/restart, Slurmctld failure/restart.
 -- Add support for SLURM_CLUSTERS environment variable in the sbatch, sinfo,
    squeue commands.
 -- Modify the sinfo and squeue commands to report state of multiple clusters
    if the --clusters option is used.
 -- Added printf __attribute__ qualifiers to info, debug, ... to help prevent
    bad/incorrect parameters being sent to them.  Original patch from
    Eygene Ryabinkin (Russian Research Centre).
 -- Fix bug in slurmctld job completion logic when nodes allocated to a
    completing job are re-booted. Patch from Hongjia Cao (NUDT).
 -- In slurmctld's node record data structure, rename "hilbert_integer" to
    "node_rank".
 -- Add topology/node_rank plugin to sort nodes based upon rank loaded from
    BASIL on Cray computers.
 -- Fix memory leak in the auth/munge and crypto/munge plugins in the case of
    some failure modes.

* Changes in SLURM 2.2.0.pre10
==============================
 -- Fix issue when EnforcePartLimits=yes in slurm.conf all jobs where no nodecnt
    was specified the job would be seen to have maxnodes=0 which would not
    allow jobs to run.
 -- Fix issue where if not suspending a job the gang scheduler does the correct
    kill procedure.
 -- Fixed some issues when dealing with jobs from a 2.1 system so they live
    after an upgrade.
 -- In srun, log if --cpu_bind options are specified, but not supported by the
    current system configuration.
 -- Various Patchs from Hongjia Cao dealing with bugs found in sacctmgr and
    the slurmdbd.
 -- Fix bug in changing the nodes allocated to a running job and some node
    names specified are invalid, avoid invalid memory reference.
 -- Fixed filename substitution of %h and %n based on patch from Ralph Bean
 -- Added better job sorting logic when preempting jobs with qos.
 -- Log the IP address and port number for some communication errors.
 -- Fix bug in select/cons_res when --cpus_per_task option is used, could
    oversubscribe resources.
 -- In srun, do not implicitly set the job's maximum node count based upon a
    required hostlist.
 -- Avoid running the HealthCheckProgram on non-responding nodes rather than
    DOWN nodes.
 -- Fix bug in handling of poll() functions on OS X (SLURM was ignoring POLLIN
    if POLLHUP flag was set at the same time).
 -- Pulled Cray logic out of common/node_select.c into it's own
    select/cray plugin cons_res is the default.  To use linear add 'Linear' to
    SelectTypeParameters.
 -- Fixed bug where resizing jobs didn't correctly set used limits correctly.
 -- Change sched/backfill default time interval to 30 seconds and defer attempt
    to backfill schedule if slurmctld has more than 5 active RPCs. General
    improvements in logic scalability.
 -- Add SchedulerParameters option of default_sched_depth=# to control how
    many jobs on queue should be tested for attempted scheduling when a job
    completes or other routine events. Default value is 100 jobs. The full job
    queue is tested on a less frequent basis. This option can dramatically
    improve performance on systems with thousands of queued jobs.
 -- Gres/gpu now sets the CUDA_VISIBLE_DEVICES environment to control which
    GPU devices should be used for each job or job step and CUDA version 3.1+
    is used. NOTE: SLURM's generic resource support is still under development.
 -- Modify select/cons_res to pack jobs onto allocated nodes differently and
    minimize system fragmentation. For example on nodes with 8 CPUs each, a
    job needing 10 CPUs will now ideally be allocated 8 CPUs on one node and
    2 CPUs on another node. Previously the job would have ideally been
    allocated 5 CPUs on each node, fragmenting the unused resources more.
 -- Modified the behavior of update_job() in job_mgr.c to return when the first
    error is encountered instead of continuing with more job updates.
 -- Removed all references to the following slurm.conf parameters, all of which
    have been removed or replaced since version 2.0 or earlier: HashBase,
    HeartbeatInterval, JobAcctFrequency, JobAcctLogFile (instead use
    AccountingStorageLoc), JobAcctType, KillTree, MaxMemPerTask, and
    MpichGmDirectSupport.
 -- Fix bug in slurmctld restart logic that improperly reported jobs had
    invalid features: "Job 65537 has invalid feature list: fat".
 -- BLUEGENE - Removed thread pool for destroying blocks.  It turns out the
    memory leak we were concerned about for creating and destroying threads
    in a plugin doesn't exist anymore.  This increases throughput dramatically,
    allowing multiple jobs to start at the same time.
 -- BLUEGENE - Removed thread pool for starting and stopping jobs.  For similar
    reasons as noted above.
 -- BLUEGENE - Handle blocks that never deallocate.

* Changes in SLURM 2.2.0.pre9
=============================
 -- sbatch can now submit jobs to multiple clusters and run on the earliest
    available.
 -- Fix bug introduced in pre8 that prevented job dependencies and job
    triggers from working without the --enable-debug configure option.
 -- Replaced slurm_addr with slurm_addr_t
 -- Replaced slurm_fd with slurm_fd_t
 -- Skeleton code added for BlueGeneQ.
 -- Jobs can now be submitted to multiple partitions (job queues) and use the
    one permitting earliest start time.
 -- Change slurmdb_coord_table back to acct_coord_table to keep consistant
    with < 2.1.
 -- Introduced locking system similar to that in the slurmctld for the
    assoc_mgr.
 -- Added ability to change a users name in accounting.
 -- Restore squeue support for "%G" format (group id) accidentally removed in
    2.2.0.pre7.
 -- Added preempt_mode option to QOS.
 -- Added a grouping=individual for sreport size reports.
 -- Added remove_qos logic to jobs running under a QOS that was removed.
 -- scancel now exits with a 1 if any job is non-existant when canceling.
 -- Better handling of select plugins that don't exist on various systems for
    cross cluster communication.  Slurmctld, slurmd, and slurmstepd now only
    load the default select plugin as well.
 -- Better error handling when loading plugins.
 -- Prevent scontrol from aborting if getlogin() returns NULL.
 -- Prevent scontrol segfault when there are hidden nodes.
 -- Prevent srun segfault after task launch failure.
 -- Added job_submit/lua plugin.
 -- Fixed sinfo on a bluegene system to print correctly the output for:
    sinfo -e -o "%9P %6m %.4c %.22F %f"
 -- Add scontrol commands "hold" and "release" to simplify setting a job's
    priority to 0 or 1. Also tests that the job is in pending state.
 -- Increase maximum node list size (for incoming RPC) from 1024 bytes to 64k.
 -- In the backup slurmctld, purge triggers before recovering trigger state to
    avoid duplicate entries.
 -- Fix bug in sacct processing of --fields= option.
 -- Fix bug in checkpoint/blcr for jobs spanning multiple nodes introduced when
    changing some variable names in version 2.2.0.pre5.
 -- Removed the vestigal set_max_cluster_usage() function from the Priority
    Plugin API.
 -- Modify the output of "scontrol show job" for the field ReqS:C:T=. Fields
    not specified by the user will be reported as "*" instead of 65534.
 -- Added DefaultQOS option for an association.
 -- BLUEGENE - Added -B option to the slurmctld to clear created blocks from
    the system on start.
 -- BLUEGENE - Added option to scontrol & sview to recreate existing blocks.
 -- Fixed flags for returning messages to use the correct munge key when going
    cross-cluster.
 -- BLUEGENE - Added option to scontrol & sview to resume blocks in an error
    state instead of just freeing them.
 -- sview patched to allow multiple row selection of jobs, patch from Dan Rusak
 -- Lower default slurmctld server thread count from 1024 to 256. Some systems
    process threads on a last-in first-out basis and the high thread count was
    causing unexpectedly high delays for some RPCs.
 -- Added to sacctmgr the ability for admins to reset the raw usage of a user
    or account
 -- Improved the efficiency of a few lines in sacctmgr

* Changes in SLURM 2.2.0.pre8
=============================
 -- Add DebugFlags parameter of "Backfill" for sched/backfill detailed logging.
 -- Add DebugFlags parameter of "Gang" for detailed logging of gang scheduling
    activities.
 -- Add DebugFlags parameter of "Priority" for detailed logging of priority
    multifactor activities.
 -- Add DebugFlags parameter of "Reservation" for detailed logging of advanced
    reservations.
 -- Add run time to mail message upon job termination and queue time for mail
    message upon job begin.
 -- Add email notification option for job requeue.
 -- Generate a fatal error if the srun --relative option is used when not
    within an existing job allocation.
 -- Modify the meaning of InactiveLimit slightly. It will now cancel the job
    allocation created using the salloc or srun command if those commands
    cease responding for the InactiveLimit regardless of any running job steps.
    This parameter will no longer effect jobs spawned using sbatch.
 -- Remove AccountingStoragePass and JobCompPass from configuration RPC and
    scontrol show config command output. The use of SlurmDBD is still strongly
    recommended as SLURM will have limited database functionality or protection
    otherwise.
 -- Add sbatch options of --export and SBATCH_EXPORT to control which
    environment variables (if any) get propagated to the spawned job. This is
    particularly important for jobs that are submitted on one cluster and run
    on a different cluster.
 -- Fix bug in select/linear when used with gang scheduling and there are
    preempted jobs at the time slurmctld restarts that can result in over-
    subscribing resources.
 -- Added keeping track of the qos a job is running with in accounting.
 -- Fix for handling correctly jobs that resize, and also reporting correct
    stats on a job after it finishes.
 -- Modify gang scheduler so with SelectTypeParameter=CR_CPUS and task
    affinity is enabled, keep track of the individual CPUs allocated to jobs
    rather than just the count of CPUs allocated (which could overcommit
    specific CPUs for running jobs).
 -- Modify select/linear plugin data structures to eliminate underflow errors
    for the exclusive_cnt and tot_job_cnt variables (previously happened when
    slurmctld reconfigured while the job was in completing state).
 -- Change slurmd's working directory (and location of core files) to match
    that of the slurmctld daemon: the same directory used for log files,
    SlurmdLogFile (if specified with an absolute pathname) otherwise the
    directory used to save state, SlurmdSpoolDir.
 -- Add sattach support for the --pty option.
 -- Modify slurmctld communications logic to accept incoming messages on more
    than one port for improved scalability.
 -- Add SchedulerParameters option of "defer" to avoid trying to schedule a
    job at submission time, but to attempt scheduling many jobs at once for
    improved performance under heavy load.
 -- Correct logic controlling slurmctld thread limit eliminating check of
    RLIMIT_STACK.
 -- Make slurmctld's trigger logic more robust in the event that job records
    get purged before their trigger can be processed (e.g. MinJobAge=1).
 -- Add support for users to hold/release their own jobs (submit the job with
    srun/sbatch --hold/-H option or use "scontrol update jobid=# priority=0"
    to hold and "scontrol update jobid=# priority=1" to release).
 -- Added ability for sacct to query jobs by qos and a range of timelimits.
 -- Added ability for sstat to query pids of steps running.
 -- Support time specification in UTS format with a prefix of "uts" (e.g.
    "sbatch --begin=uts458389988 my.script").

* Changes in SLURM 2.2.0.pre7
=============================
 -- Fixed issue with sacctmgr if querying against non-existent cluster it
    works the same way as 2.1.
 -- Added infrastructure to support allocation of generic node resources (gres).
    -Modified select/linear and select/cons_res plugins to allocate resources
     at the level of a job without oversubcription.
    -Get sched/backfill operating with gres allocations.
    -Get gres configuration changes (reconfiguration) working.
    -Have job steps allocate resources.
    -Modified job step credential to include the job's and step's gres
     allocation details.
    -Integrate with HWLOC library to identify GPUs and NICs configured on each
     node.
 -- SLURM commands (squeue, sinfo, etc...) can now go cross-cluster on like
    linux systems.  Cross-cluster for bluegene to linux and such should
    work fine, even sview.
 -- Added the ability to configure PreemptMode on a per-partition basis.
 -- Change slurmctld's default thread limit count to 1024, but adjust that down
    as needed based upon the process's resource limits.
 -- Removed the non-functional "SystemCPU" and "TotalCPU" reporting fields from
    sstat and updated man page
 -- Correct location of apbasil command on Cray XT systems.
 -- Fixed bug in MinCPU and AveCPU calculations in sstat command
 -- Send message to srun when the Prolog takes too long (MessageTimeout) to
    complete.
 -- Change timeout for socket connect() to be half of configured MessageTimeout.
 -- Added high-throughput computing web page with configuration guidance.
 -- Use more srun sockets to process incoming PMI (MPICH2) connections for
    better scalability.
 -- Added DebugFlags for the select/bluegene plugin: DEBUG_FLAG_BG_PICK,
    DEBUG_FLAG_BG_WIRES, DEBUG_FLAG_BG_ALGO, and DEBUG_FLAG_BG_ALGO_DEEP.
 -- Remove vestigial job record field "kill_on_step_done" (internal to the
    slurmctld daemon only).
 -- For MPICH2 jobs: Clear PMI state between job steps.

* Changes in SLURM 2.2.0.pre6
=============================
 -- sview - added ability to see database configuration.
 -- sview - added ability to add/remove visible tabs.
 -- sview - change way grid highlighting takes place on selected objects.
 -- Added infrastructure to support allocation of generic node resources.
    -Added node configuration parameter of Gres=.
    -Added ability to view/modify a node's gres using scontrol, sinfo and sview.
    -Added salloc, sbatch and srun --gres option.
    -Added ability to view a job or job step's gres using scontrol, squeue and
     sview.
    -Added new configuration parameter GresPlugins to define plugins used to
     manage generic resources.
    -Added framework for gres plugins.
    -Added DebugFlags option of "gres" for detailed debugging of gres actions.
 -- Slurmd modified to log slow slurmstepd startup and note possible file system
    problem.
 -- sview - There is now a .slurm/sviewrc created when running sview.
    Defaults are put in there as to how sview looks when first launched.
    You can set these by Ctrl-S or Options->Set Default Settings.
 -- Add scontrol "wait_job <job_id>" option to wait for nodes to boot as needed.
    Useful for batch jobs (in Prolog, PrologSlurmctld or the script) if powering
    down idle nodes.
 -- Added salloc and sbatch option --wait-all-nodes. If set non-zero, job
    initiation will be delayed until all allocated nodes have booted. Salloc
    will log the delay with the messages "Waiting for nodes to boot" and "Nodes
    are ready for job".
 -- The Priority/mulitfactor plugin now takes into consideration size of job
    in cpus as well as size in nodes when looking at the job size factor.
    Previously only nodes were considered.
 -- When using the SlurmDBD messages waiting to be sent will be combined
    and sent in one message.
 -- Remove srun's --core option. Move the logic to an optional SPANK plugin
    (currently in the contribs directory, but plan to distribute through
    http://code.google.com/p/slurm-spank-plugins/).
 -- Patch for adding CR_CORE_DEFAULT_DIST_BLOCK as a select option to layout
    jobs using block layout across cores within each node instead of cyclic
    which was previously the default.
 -- Accounting - When removing associations if jobs are running, those jobs
    must be killed before proceeding.  Before the jobs were killed
    automatically thus causing user confusion on what is most likely an
    admin's mistake.
 -- sview - color column keeps reference color when highlighting.
 -- Configuration parameter MaxJobCount changed from 16-bit to 32-bit field.
    The default MaxJobCount was changed from 5,000 to 10,000.
 -- SLURM commands (squeue, sinfo, etc...) can now go cross-cluster on like
    linux systems.  Cross-cluster for bluegene to linux and such does not
    currently work.  You can submit jobs with sbatch.  Salloc and srun are not
    cross-cluster compatible, and given their nature to talk to actual compute
    nodes these will likely never be.
 -- salloc modified to forward SIGTERM to the spawned program.
 -- In sched/wiki2 (for Moab support) - Add GRES and WCKEY fields to MODIFYJOBS
    and GETJOBS commands. Add GRES field to GETNODES command.
 -- In struct job_descriptor and struct job_info: rename min_sockets to
    sockets_per_node, min_cores to cores_per_socket, and min_threads to
    threads_per_core (the values are not minimum, but represent the target
    values).
 -- Fixed bug in clearing a partition's DisableRootJobs value reported by
    Hongjia Cao.
 -- Purge (or ignore) terminated jobs in a more timely fashion based upon the
    MinJobAge configuration parameter. Small values for MinJobAge should improve
    responsiveness for high job throughput.

* Changes in SLURM 2.2.0.pre5
=============================
 -- Modify commands to accept time format with one or two digit hour value
    (e.g. 8:00 or 08:00 or 8:00:00 or 08:00:00).
 -- Modify time parsing logic to accept "minute", "hour", "day", and "week" in
    addition to the currently accepted "minutes", "hours", etc.
 -- Add slurmd option of "-C" to print actual hardware configuration and exit.
 -- Pass EnforcePartLimits configuration parameter from slurmctld for user
    commands to see the correct value instead of always "NO".
 -- Modify partition data structures to replace the default_part,
    disable_root_jobs, hidden and root_only fields with a single field called
    "flags" populated with the flags PART_FLAG_DEFAULT, PART_FLAG_NO_ROOT
    PART_FLAG_HIDDEN and/or PART_FLAG_ROOT_ONLY. This is a more flexible
    solution besides making for smaller data structures.
 -- Add node state flag of JOB_RESIZING. This will only exist when a job's
    accounting record is being written immediately before or after it changes
    size. This permits job accounting records to be written for a job at each
    size.
 -- Make calls to jobcomp and accounting_storage plugins before and after a job
    changes size (with the job state being JOB_RESIZING). All plugins write a
    record for the job at each size with intermediate job states being
    JOB_RESIZING.
 -- When changing a job size using scontrol, generate a script that can be
    executed by the user to reset SLURM environment variables.
 -- Modify select/linear and select/cons_res to use resources released by job
    resizing.
 -- Added to contribs foundation for Perl extension for slurmdb library.
 -- Add new configuration parameter JobSubmitPlugins which provides a mechanism
    to set default job parameters or perform other site-configurable actions at
    job submit time.
 -- Better postgres support for accounting, still beta.
 -- Speed up job start when using the slurmdbd.
 -- Forward step failure reason back to slurmd before in some cases it would
    just be SLURM_FAILURE returned.
 -- Changed squeue to fail when passed invalid -o <output_format> or
    -S <sort_list> specifications.

* Changes in SLURM 2.2.0.pre4
=============================
 -- Add support for a PropagatePrioProcess configuration parameter value of 2
    to restrict spawned task nice values to that of the slurmd daemon plus 1.
    This insures that the slurmd daemon always have a higher scheduling
    priority than spawned tasks.
 -- Add support in slurmctld, slurmd and slurmdbd for option of "-n <value>" to
    reset the daemon's nice value.
 -- Fixed slurm_load_slurmd_status and slurm_pid2jobid to work correctly when
    multiple slurmds are in use.
 -- Altered srun to set max_nodes to min_nodes if not set when doing an
    allocation to mimic that which salloc and sbatch do.  If running a step if
    the max isn't set it remains unset.
 -- Applied patch from David Egolf (David.Egolf@Bull.com). Added the ability
    to purge/archive accounting data on a day or hour basis, previously
    it was only available on a monthly basis.
 -- Add support for maximum node count in job step request.
 -- Fix bug in CPU count logic for job step allocation (used count of CPUS per
    node rather than CPUs allocated to the job).
 -- Add new configuration parameters GroupUpdateForce and GroupUpdateTime.
    See "man slurm.conf" for details about how these control when slurmctld
    updates its information of which users are in the groups allowed to use
    partitions.
 -- Added sacctmgr list events which will list events that have happened on
    clusters in accounting.
 -- Permit a running job to shrink in size using a command of
    "scontrol update JobId=# NumNodes=#" or
    "scontrol update JobId=# NodeList=<names>". Subsequent job steps must
    explicitly specify an appropriate node count to work properly.
 -- Added resize_time field to job record noting the time of the latest job
    size change (to be used for accounting purposes).
 -- sview/smap now hides hidden partitions and their jobs by default, with an
    option to display them.

* Changes in SLURM 2.2.0.pre3
=============================
 -- Refine support for TotalView partial attach. Add parameter to configure
    program of "--enable-partial-attach".
 -- In select/cons_res, the count of CPUs on required nodes was formerly
    ignored in enforcing the maximum CPU limit. Also enforce maximum CPU
    limit when the topology/tree plugin is configured (previously ignored).
 -- In select/cons_res, allocate cores for a job using a best-fit approach.
 -- In select/cons_res, for jobs that can run on a single node, use a best-fit
    packing approach.
 -- Add support for new partition states of DRAIN and INACTIVE and new partition
    option of "Alternate" (alternate partition to use for jobs submitted to
    partitions that are currently in a state of DRAIN or INACTIVE).
 -- Add group membership cache. This can substantially speed up slurmctld
    startup or reconfiguration if many partitions have AllowGroups configured.
 -- Added slurmdb api for accessing slurm DB information.
 -- In select/linear: Modify data structures for better performance and to
    avoid underflow error messages when slurmctld restarts while jobs are
    in completing state.
 -- Added hash for slurm.conf so when nodes check in to the controller it can
    verify the slurm.conf is the same as the one it is running.  If not an
    error message is displayed.  To silence this message add NO_CONF_HASH
    to DebugFlags in your slurm.conf.
 -- Added error code ESLURM_CIRCULAR_DEPENDENCY and prevent circular job
    dependencies (e.g. job 12 dependent upon job 11 AND job 11 is dependent
    upon job 12).
 -- Add BootTime and SlurmdStartTime to available node information.
 -- Fixed moab_2_slurmdb to work correctly under new database schema.
 -- Slurmd will drain a compute node when the SlurmdSpoolDir is full.

* Changes in SLURM 2.2.0.pre2
=============================
 -- Add support for spank_get_item() to get S_STEP_ALLOC_CORES and
    S_STEP_ALLOC_MEM. Support will remain for S_JOB_ALLOC_CORES and
    S_JOB_ALLOC_MEM.
 -- Kill individual job steps that exceed their memory limit rather than
    killing an entire job if one step exceeds its memory limit.
 -- Added configuration parameter VSizeFactor to enforce virtual memory limits
    for jobs and job steps as a percentage of their real memory allocation.
 -- Add scontrol ability to update job step's time limits.
 -- Add scontrol ability to update job's NumCPUs count.
 -- Add --time-min options to salloc, sbatch and srun. The scontrol command
    has been modified to display and modify the new field. sched/backfill
    plugin has been changed to alter time limits of jobs with the
    --time-min option if doing so permits earlier job initiation.
 -- Add support for TotalView symbol MPIR_partial_attach_ok with srun support
    to release processes which TotalView does not attach to.
 -- Add new option for SelectTypeParameters of CR_ONE_TASK_PER_CORE. This
    option will allocate one task per core by default. Without this option,
    by default one task will be allocated per thread on nodes with more than
    one ThreadsPerCore configured.
 -- Avoid accounting separately for a current pid corresponds to a Light Weight
    Process (Thread POSIX) appearing in the /proc directory. Only account for
    the original process (pid==tgid) to avoid accounting for memory use more
    than once.
 -- Add proctrack/cgroup plugin which uses Linux control groups (aka cgroup)
    to track processes on Linux systems having this feature enabled (kernel
    >= 2.6.24).
 -- Add logging of license transations including job_id.
 -- Add configuration parameters SlurmSchedLogFile and SlurmSchedLogLevel to
    support writing scheduling events to a separate log file.
 -- Added contribs/web_apps/chart_stats.cgi, a web app that invokes sreport to
    retrieve from the accounting storage db a user's request for job usage or
    machine utilization statistics and charts the results to a browser.
 -- Massive change to the schema in the storage_accounting/mysql plugin.  When
    starting the slurmdbd the process of conversion may take a few minutes.
    You might also see some errors such as 'error: mysql_query failed: 1206
    The total number of locks exceeds the lock table size'.  If you get this,
    do not worry, it is because your setting of innodb_buffer_pool_size in
    your my.cnf file is not set or set too low.  A decent value there should
    be 64M or higher depending on the system you are running on.  See
    RELEASE_NOTES for more information.  But setting this and then
    restarting the mysqld and slurmdbd will put things right.  After this
    change we have noticed 50-75% increase in performance with sreport and
    sacct.
 -- Fix for MaxCPUs to honor partitions of 1 node that have more than the
    maxcpus for a job.
 -- Add support for "scontrol notify <message>" to work for batch jobs.

* Changes in SLURM 2.2.0.pre1
=============================
 -- Added RunTime field to scontrol show job report
 -- Added SLURM_VERSION_NUMBER and removed SLURM_API_VERSION from
    slurm/slurm.h.
 -- Added support to handle communication with SLURM 2.1 clusters.  Job's
    should not be lost in the future when upgrading to higher versions of
    SLURM.
 -- Added withdeleted options for listing clusters, users, and accounts
 -- Remove PLPA task affinity functions due to that package being deprecated.
 -- Preserve current partition state information and node Feature and Weight
    information rather than use contents of slurm.conf file after slurmctld
    restart with -R option or SIGHUP. Replace information with contents of
    slurm.conf after slurmctld restart without -R or "scontrol reconfigure".
    See RELEASE_NOTES file fore more details.
 -- Modify SLURM's PMI library (for MPICH2) to properly execute an executable
    program stand-alone (single MPI task launched without srun).
 -- Made GrpCPUs and MaxCPUs limits work for select/cons_res.
 -- Moved all SQL dependant plugins into a seperate rpm slurm-sql.  This
    should be needed only where a connection to a database is needed (i.e.
    where the slurmdbd is running)
 -- Add command line option "no_sys_info" to PAM module to supress system
    logging of "access granted for user ...", access denied and other errors
    will still be logged.
 -- sinfo -R now has the user and timestamp in separate fields from the reason.
 -- Much functionality has been added to account_storage/pgsql.  The plugin
    is still in a very beta state.  It is still highly advised to use the
    mysql plugin, but if you feel like living on the edge or just really
    like postgres over mysql for some reason here you go. (Work done
    primarily by Hongjia Cao, NUDT.)

* Changes in SLURM 2.1.17
=========================
 -- Correct format of --begin reported in salloc, sbatch and srun --help
    message.
 -- Correct logic for regular users to increase nice value of their own jobs.

* Changes in SLURM 2.1.16
=========================
 -- Fixed minor warnings from gcc-4.5
 -- Fixed initialization of accounting_stroage_enforce in the slurmctld.
 -- Fixed bug where if GrpNodes was lowered while pending jobs existed and where
    above the limit the slurmctld would seg fault.
 -- Fixed minor memory leak when unpack error happens on an
    association_shares_object_t.
 -- Set Lft and Rgt correctly when adding association.  Fix for regression
    caused in 2.1.15, cosmetic fix only.
 -- Replaced optarg which was undefined in some spots to make sure ENV vars are
    set up correctly.
 -- When removing an account from a cluster with sacctmgr you no longer get
    a list of previously deleted associations.
 -- Fix to make jobcomp/(pg/my)sql correctly work when the database name is
    different than the default.

* Changes in SLURM 2.1.15
=========================
 -- Fix bug in which backup slurmctld can purge job scripts (and kill batch
    jobs) when it assumes primary control, particularly when this happens
    multiple times in a short time interval.
 -- In sched/wiki and sched/wiki2 add IWD (Initial Working Directory) to the
    information reported about jobs.
 -- Fix bug in calculating a daily or weekly reservation start time when the
    reservation is updated. Patch from Per Lundqvist (National Supercomputer
    Centre, Linköping University, Sweden).
 -- Fix bug in how job step memory limits are calculated when the --relative
    option is used.
 -- Restore operation of srun -X option to forward SIGINT to spawned tasks
    without killing them.
 -- Fixed a bug in calculating the root account's raw usage reported by Par
    Andersson
 -- Fixed a bug in sshare displaying account hierarchy reported by Per
    Lundqvist.
 -- In select/linear plugin, when a node allocated to a running job is removed
    from a partition, only log the event once. Fixes problem reported by Per
    Lundqvist.

* Changes in SLURM 2.1.14
=========================
 -- Fixed coding mistakes in _slurm_rpc_resv_show() and job_alloc_info() found
    while reviewing the code.
 -- Fix select/cons_res logic to prevent allocating resources while jobs
    previously allocated resources on the node are still completing.
 -- Fixed typo in job_mgr.c dealing with qos instead of associations.
 -- Make sure associations and qos' are initiated when added.
 -- Fixed wrong initialization for wckeys in the association manager.
 -- Added wiki.conf configuration parameter of HidePartitionNodes. See
    "man wiki.conf" for more information.
 -- Add "JobAggregationTime=#" field SchedulerParameter configuration parameter
    output.
 -- Modify init.d/slurm and slurmdbd scripts to prevent the possible
    inadvertent inclusion of "." in LD_LIBRARY_PATH environment variable.
    To fail, the script would need to be executed by user root or SlurmUser
    without the LD_LIBRARY_PATH environment variable set and there would
    have to be a maliciously altered library in the working directory.
    Thanks to Raphael Geissert for identifying the problem. This addresses
    security vulnerability CVE-2010-3380.

* Changes in SLURM 2.1.13
=========================
 -- Fix race condition which can set a node state to IDLE on slurmctld startup
    even if it has running jobs.

* Changes in SLURM 2.1.12
=========================
 -- Fixes for building on OS X 10.5.
 -- Fixed a few '-' without a '\' in front of them in the man pages.
 -- Fixed issues in client tools where a requeued job did get displayed
    correctly.
 -- Update typos in doc/html/accounting.shtml doc/html/resource_limits.shtml
    doc/man/man5/slurmdbd.conf.5 and doc/man/man5/slurm.conf.5
 -- Fixed a bug in exitcode:signal display in sacct
 -- Fix bug when request comes in for consumable resources and the -c option
    is used in conjunction with -O
 -- Fixed squeue -o "%h" output formatting
 -- Change select/linear message "error: job xxx: best_fit topology failure"
    to debug type.
 -- BLUEGENE - Fix for sinfo -R to group all midplanes together in a single
    line for midplanes in an error state instead of 1 line for each midplane.
 -- Fix srun to work correctly with --uid when getting an allocation
    and creating a step, also fix salloc to assume identity at the correct
    time as well.
 -- BLUEGENE - Fixed issue with jobs being refused when running dynamic mode
    and every job on the system happens to be the same size.
 -- Removed bad #define _SLURMD_H from slurmd/get_mach_stat.h.  Didn't appear
    to cause any problems being there, just incorrect syntax.
 -- Validate the job ID when salloc or srun receive an SRUN_JOB_COMPLETE RPC to
    avoid killing the wrong job if the original command exits and the port gets
    re-used by another command right away.
 -- Fix to node in correct state in accounting when updating it to drain from
    scontrol/sview.
 -- BLUEGENE - Removed incorrect unlocking on error cases when starting jobs.
 -- Improve logging of invalid sinfo and squeue print options.
 -- BLUEGENE - Added check to libsched_if to allow root to run even outside of
    SLURM.  This is needed when running certain blocks outside of SLURM in HTC
    mode.

* Changes in SLURM 2.1.11-2
===========================
 -- BLUEGENE - make it so libsched_if.so is named correctly on 'L' it is
    libsched_if64.so and on 'P' it is libsched_if.so

* Changes in SLURM 2.1.11
=========================
 -- BLUEGENE - fix sinfo to not get duplicate entries when running command
    sinfo -e -o "%9P %6m %.4c %.22F %f"
 -- Fix bug that caused segv when deleting a partition with pending jobs.
 -- Better error message for when trying to modify an account's name with
    sacctmgr.
 -- Added back removal of #include "src/common/slurm_xlator.h" from
    select/cons_res.
 -- Fix incorrect logic in global_accounting in regression tests for
    setting QOS.
 -- BLUEGENE - Fixed issue where removing a small block in dynamic mode,
    and other blocks also in that midplane needed to be removed and were in
    and error state.  They all weren't removed correctly in accounting.
 -- Prevent scontrol segv with "scontrol show node <name>" command with nodes
    in a hidden partition.
 -- Fixed sizing of popup grids in sview.
 -- Fixed sacct when querying against a jobid the start time is not set.
 -- Fix configure to get correct version of pkg-config if both 32bit and 64bit
    libs are installed.
 -- Fix issue with sshare not sorting correctly the tree of associations.
 -- Update documentation for sreport.
 -- BLUEGENE - fix regression in 2.1.10 on assigning multiple jobs to one block.
 -- Minor memory leak fixed when killing job error happens.
 -- Fix sacctmgr list assoc when talking to a 2.2 slurmdbd.

* Changes in SLURM 2.1.10
=========================
 -- Fix memory leak in sched/builtin plugin.
 -- Fixed sbatch to work correctly when no nodes are specified, but
    --ntasks-per-node is.
 -- Make sure account and wckey for a job are lower case before inserting into
    accounting.
 -- Added note to squeue documentation about --jobs option displaying jobs
    even if they are on hidden partitions.
 -- Fix srun to work correctly with --uid when getting an allocation
    and creating a step.
 -- Fix for when removing a limit from a users association inside the
    fairshare tree the parents limit is now inherited automatically in
    the slurmctld.  Previously the slurmctld would have to be restarted.
    This problem only exists when setting a users association limit to -1.
 -- Patch from Matthieu Hautreux (CEA) dealing with possible overflows that
    could come up with the select/cons_res plugin with uint32_t's being treated
    as uint16_t's.
 -- Correct logic for creating a reservation with a Duration=Infinite (used to
    set reservation end time in the past).
 -- Correct logic for creating a reservation that properly handles the OVERLAP
    and IGNORE_JOBS flags (flags were ignored under some conditions).
 -- Fixed a fair-share calculation bug in the priority/multifactor plugin.
 -- Make sure a user entry in the database that was previously deleted is
    restored clean when added back, i.e. remove admin privileges previously
    given.
 -- BLUEGENE - Future start time is set correctly when eligible time for a job
    is in the future, but the job can physically run earlier.
 -- Updated Documentation for sacctmgr for Wall and CPUMin options stating when
    the limit is reached running jobs will be killed.
 -- Fix deadlock issue in the slurmctld when lowering limits in accounting to
    lower than that of pending jobs.
 -- Fix bug in salloc, sbatch and srun that could under some conditions process
    the --threads-per-core, --cores-per-socket and --sockets-per-node options
    improperly.
 -- Fix bug in select/cons_res with memory management plus job preemption with
    job removal (e.g. requeue) which under some conditions failed to preempt
    jobs.
 -- Fix deadlock potential when using qos and associations in the slurmctld.
 -- Update documentation to state --ntasks-per-* is for a maximum value
    instead of an absolute.
 -- Get ReturnToService=2 working for front-end configurations (e.g. Cray or
    BlueGene).
 -- Do not make a non-responding node available for use after running
    "scontrol update nodename=<name> state=resume". Wait for node to respond
    before use.
 -- Added slurm_xlator.h to jobacct_gather plugins so they resolve symbols
    correctly when linking to the slurm api.
 -- You can now update a jobs QOS from scontrol.  Previously you could only do
    this from sview.
 -- BLUEGENE - Fixed bug where if running in non-dynamic mode sometimes the
    start time returned for a job when using test-only would not be correct.

* Changes in SLURM 2.1.9
========================
 -- In select/linear - Fix logic to prevent over-subscribing memory with shared
    nodes (Shared=YES or Shared=FORCE).
 -- Fix for handling -N and --ntasks-per-node without specifying -n with
    salloc and sbatch.
 -- Fix jobacct_gather/linux if not polling on tasks to give tasks time to
    start before doing initial gather.
 -- When changing priority with the multifactor plugin we make sure we update
    the last_job_update variable.
 -- Fixed sview for gtk < 2.10 to display correct debug level at first.
 -- Fixed sview to not select too fast when using a mouse right click.
 -- Fixed sacct to display correct timelimits for jobs from accounting.
 -- Fixed sacct when running as root by default query all users as documented.
 -- In proctrack/linuxproc, skip over files in /proc that are not really user
    processes (e.g. "/proc/bus").
 -- Fix documentation bug for slurmdbd.conf
 -- Fix slurmctld to update qos preempt list without restart.
 -- Fix bug in select/cons_res that in some cases would prevent a preempting job
    from using of resources already allocated to a preemptable running job.
 -- Fix for sreport in interactive mode to honor parsable/2 options.
 -- Fixed minor bugs in sacct and sstat commands
 -- BLUEGENE - Fixed issue if the slurmd becomes unresponsive and you have
    blocks in an error state accounting is correct when the slurmd comes
    back up.
 -- Corrected documentation for -n option in srun/salloc/sbatch
 -- BLUEGENE - when running a willrun test along with preemption the bluegene
    plugin now does the correct thing.
 -- Fix possible memory corruption issue which can cause slurmctld to abort.
 -- BLUEGENE - fixed small memory leak when setting up env.
 -- Fixed deadlock if using accounting and cluster changes size in the
    database.  This can happen if you mistakenly have multiple primary
    slurmctld's running for a single cluster, which should rarely if ever
    happen.
 -- Fixed sacct -c option.
 -- Critical bug fix in sched/backfill plugin that caused memory corruption.

* Changes in SLURM 2.1.8
========================
 -- Update BUILD_NOTES for AIX and bgp systems on how to get sview to
    build correctly.
 -- Update man page for scontrol when nodes are in the "MIXED" state.
 -- Better error messages for sacctmgr.
 -- Fix bug in allocation of CPUs with select/cons_res and --cpus-per-task
    option.
 -- Fix bug in dependency support for afterok and afternotok options to insure
    that the job's exit status gets checked for dependent jobs prior to puring
    completed job records.
 -- Fix bug in sched/backfill that could set an incorrect expected start time
    for a job.
 -- BLUEGENE - Fix for systems that have midplanes defined in the database
    that don't exist.
 -- Accounting, fixed bug where if removing an object a rollback wasn't
    possible.
 -- Fix possible scontrol stack corruption when listing jobs with very a long
    job or working directory name (over 511 characters).
 -- Insure that SPANK environment variables set by salloc or sbatch get
    propagated to the Prolog on all nodes by setting SLURM_SPANK_* environment
    variables for srun's use.
 -- In sched/wiki2 - Add support for the MODIFYJOB command to alter a job's
    comment field
 -- When a cluster first registers with the SlurmDBD only send nodes in an
    non-usable state.  Before all nodes were sent.
 -- Alter sacct to be able to query jobs by association id.
 -- Edit documentation for scontrol stating ExitCode as something not alterable.
 -- Update documentation about ReturnToService and silently rebooting nodes.
 -- When combining --ntasks-per-node and --exclusive in an allocation request
    the correct thing, giving the allocation the entire node but only
    ntasks-per-node, happens.
 -- Fix accounting transaction logs when deleting associations to put the
    ids instead of the lfts which could change over time.
 -- Fix support for salloc, sbatch and srun's --hint option to avoid allocating
    a job more sockets per node or more cores per socket than desired. Also
    when --hint=compute_bound or --hint=memory_bound then avoid allocating more
    than one task per hyperthread (a change in behavior, but almost certainly
    a preferable mode of operation).

* Changes in SLURM 2.1.7
========================
 -- Modify srun, salloc and sbatch parsing for the --signal option to accept
    either a signal name in addition to the previously supported signal
    numbers (e.g. "--signal=USR2@200").
 -- BLUEGENE - Fixed sinfo --long --Node output for cpus on a single cnode.
 -- In sched/wiki2 - Fix another logic bug in support of Moab being able to
    identify preemptable jobs.
 -- In sched/wiki2 - For BlueGene systems only: Fix bug preventing Moab from
    being able to correctly change the node count of pending jobs.
 -- In select/cons_res - Fix bug preventing job preemption with a configuration
    of Shared=FORCE:1 and PreemptMode=GANG,SUSPEND.
 -- In the TaskProlog, add support for an "unset" option to clear environment
    variables for the user application. Also add support for embedded white-
    space in the environment variables exported to the user application
    (everything after the equal sign to the end of the line is included without
    alteration).
 -- Do not install /etc/init.d/slurm or /etc/init.d/slurmdbd on AIX systems.
 -- BLUEGENE - fixed check for small blocks if a node card of a midplane is
    in an error state other jobs can still run on the midplane on other
    nodecards.
 -- BLUEGENE - Check to make sure job killing is in the active job table in
    DB2 when killing the job.
 -- Correct logic to support ResvOverRun configuration parameter.
 -- Get --acctg-freq option working for srun and salloc commands.
 -- Fix sinfo display of drained nodes correctly with the summarize flag.
 -- Fix minor memory leaks in slurmd and slurmstepd.
 -- Better error messages for failed step launch.
 -- Modify srun to insure compatability of the --relative option with the node
    count requested.

* Changes in SLURM 2.1.6-2
==========================
 -- In sched/wiki2 - Fix logic in support of Moab being able to identify
    preemptable jobs.
 -- Applied fixes to a debug4 message in priority_multifactor.c sent in by
    Per Lundqvist
 -- BLUEGENE - Fixed issue where incorrect nodecards could be picked when
    looking at combining small blocks to make a larger small block.

* Changes in SLURM 2.1.6
========================
 -- For newly submitted jobs, report expected start time in squeue --start as
    "N/A" rather than current time.
 -- Correct sched/backfill logic so that it runs in a more timely fashion.
 -- Fixed issue if running on accounting cache and priority/multifactor to
    initialize the root association when the database comes back up.
 -- Emulated BLUEGENE - fixed issue where blocks weren't always created
    correctly when loading from state.  This does not apply to a real
    bluegene system, only emulated.
 -- Fixed bug when job is completing and its cpu_cnt would be calculated
    incorrectly, possibly resulting in an underflow being logged.
 -- Fixed bug where if there are pending jobs in a partition which was
    updated to have no nodes in it the slurmctld would dump core.
 -- Fixed smap and sview to display partitions with no nodes in them.
 -- Improve configure script's logic to detect LUA libraries.
 -- Fix bug that could cause slurmctld to abort if select/cons_res is used AND a
    job is submitted using the --no-kill option AND one of the job's nodes goes
    DOWN AND slurmctld restarts while that job is still running.
 -- In jobcomp plugins, job time limit was sometimes recorded improperly if not
    set by user (recorded huge number rather than partition's time limit).

* Changes in SLURM 2.1.5
========================
 -- BLUEGENE - Fixed display of draining nodes for sinfo -R.
 -- Fixes to scontrol and sview when setting a job to an impossible start time.
 -- Added -h to srun for help.
 -- Fix for sacctmgr man page to remove erroneous 'with' statements.
 -- Fix for unpacking jobs with accounting statistics, previously it appears
    only steps were unpacked correctly, for the most case sacct would only
    display this information making this fix a very minor one.
 -- Changed scontrol and sview output for jobs with unknown end times from
    'NONE' to 'Unknown'.
 -- Fixed mysql plugin to reset classification when adding a
    previously deleted cluster.
 -- Permit a batch script to reset umask and have that propagate to tasks
    spawed by subsequent srun. Previously the umask in effect when sbatch was
    executed was propagated to tasks spawed by srun.
 -- Modify slurm_job_cpus_allocated_on_node_id() and
    slurm_job_cpus_allocated_on_node() functions to not write explanation of
    failures to stderr. Only return -1 and set errno.
 -- Correction in configurator.html script. Prolog and Epilog were reversed.
 -- BLUEGENE - Fixed race condition where if a nodecard has an error on an
    un-booted block when a job comes to use it before the state checking
    thread notices it which could cause the slurmctld to lock up on a
    non-dynamic system.
 -- In select/cons_res with FastSchedule=0 and Procs=# defined for the node,
    but no specific socket/core/thread count configured, avoid fatal error if
    the number of cores on a node is less than the number of Procs configured.
 -- Added ability for the perlapi to utilize opaque data types returned from
    the C api.
 -- BLUEGENE - made the perlapi get correct values for cpus per node,
    Previously it would give the number of cpus per cnode instead of midplane.
 -- BLEUGENE - Fixed issue where if a block being selected for a job to use
    and during the process a hardware failure happens, previously the block
    would still be allowed to be used which would fail or requeue the job