Newer
Older
=========================
- switch/elan: Fix for "Failed to initialise stats structure" from
libelan when ELAN_STATKEY > MAX_INT.
- Tune PMI support logic for better scalability and performance.
- Fix for running a task on each node of an allocation if not specified.
- In sched/wiki2, set TASKLIST for running jobs.
- In sched/wiki2, set STARTDATE for pending jobs with deferred start.
- Added srun --get-user-env option (for Moab scheduler).
* Changes in SLURM 1.1.24
=========================
- In sched/wiki2, add support for direct "srun --dependency=" use.
- mpi/mvapich: Add support for MVAPICH protocol version 6.
- In sched/wiki2, change "JOBMODIFY" command to "MODIFYJOB".
- In sched/wiki2, change "JOBREQUEUE" command to "REQUEUEJOB".
- For sched/wiki2, permit normal user to specify arbitrary job id.
- In sched/wiki2, set buffer pointer to NULL after free() to avoid
possible memory corruption.
- In sched/wiki2, report a job's exit code on completion.
- For AIX, fix mail for job event notification.
- Add documentation for propagation options in man srun and slurm.conf.
* Changes in SLURM 1.1.23
=========================
- Fix bug in non-blocking connect() code affecting AIX.
Christopher J. Morrone
committed
* Changes in SLURM 1.1.22
=========================
- Add squeue option to print a job step's task count (-o %A).
- Initialize forward_struct to avoid trying to free a bad pointer,
patch from Anton Blanchard (SAMBA).
- In sched/wiki2, fix fatal race condition on slurmctld startup.
- Fix for displaying launching verbose messages for each node under the
tree instead of just the head one.
- Fix job suspend bug, job accounting plugin would SEGV when given a
bad job ID.
* Changes in SLURM 1.1.21
=========================
- BLUEGENE - Wait on a fini to make sure all threads are finished before
cleaning up.
- BLUEGENE - replacements to not destroy lists but just empty it to avoid
losing the pointer to the list in the block allocator.
- BLUEGENE - added --enable-bluegene-emulation configure option to 1.1
- In sched/wiki2, enclose a job's COMMENT value in double quotes.
- In sched/wiki2, support newly defined SIGNALJOB command.
- In sched/wiki2, maintain open event socket, don't open and close
for each event.
- In sched/wiki2, fix for scalability problem starting large jobs.
- Fix logic to execute a batch job step (under an existing resource
allocation) as needed by LSF.
- Patches from Hongjia Cao (pmi finialize issues and type declaration)
- Delete pending job if it's associated partition is deleted.
- fix for handling batch steps completing correctly and setting the
return code.
- Altered ncurses check to make sure programs can link before saying we
have a working curses lib and header.
- Fixed an init issue with forward_struct_init not being set correctly in
a few locations in the slurmd.
- Fix for user to use the NodeHostname (when specified in the slurm.conf file)
to start jobs on.
Christopher J. Morrone
committed
* Changes in SLURM 1.1.20
=========================
- Added new SPANK plugin hook slurm_spank_local_user_init() called
from srun after node allocation.
- Fixed bug with hostfile support not working on a direct srun
* Changes in SLURM 1.1.19
=========================
- BLUEGENE - make sure the order of blocks read in from the bluegene.conf
are created in that order (static mode).
- Fix logic in connect(), slurmctld fail-over was broken in v1.1.18.
- Fix logic to calculate the correct timeout for fan out.
* Changes in SLURM 1.1.18
=========================
- In sched/wiki2, add support for EHost and EHostBackup configuration
parameters in wiki.conf file
- In sched/wiki2, fix memory management bug for JOBWILLRUN command.
- In sched/wiki2, consider job Busy while in Completing state for
KillWait+10 seconds (used to be 30 seconds).
- BLUEGENE - Fixes to allow full block creation on the system and not to add
passthrough nodes to the allocation when creating a block.
- BLUEGENE - Fix deadlock issue with starting and failing jobs at the same
time
- Make connect() non-blocking and poll() with timeout to avoid huge
waits under some conditions.
- Set "ENVIRONMENT=BATCH" environment variable for "srun --batch" jobs only.
- Add logic to save/restore select/cons_res state information.
Christopher J. Morrone
committed
- BLUEGENE - make all sprintf's into snprintf's
Christopher J. Morrone
committed
- Fix for "srun -A" segfault on a node failure.
* Changes in SLURM 1.1.17
=========================
- BLUEGENE - fix to make dynamic partitioning not go create block where
there are nodes that are down or draining.
- Fix srun's default node count with an existing allocation when neither
SLURM_NNODES nor -N are set.
- Stop srun from setting SLURM_DISTRIBUTION under job steps when a
specific was not explicitly requested by the user.
* Changes in SLURM 1.1.16
=========================
- BLUEGENE - fix to make prolog run 5 minutes longer to make sure we have
enough time to free the overlapping blocks when starting a new job on a
block.
- BLUEGENE - edit to the libsched_if.so to read env and look at
MPIRUN_PARTITION to see if we are in slurm or running mpirun natively.
- Plugins are now dlopened RTLD_LAZY instead of RTLD_NOW.
* Changes in SLURM 1.1.15
=========================
- BLUEGENE - fix to be able to create static partitions
- Fixed fanout timeout logic.
- Fix for slurmctld timeout on outgoing message (Hongjia Cao, NUDT.edu.cn).
* Changes in SLURM 1.1.14
=========================
- In sched/wiki2: report job/node id and state only if no changes since
time specified in request.
- In sched/wiki2: include a job's exit code in job state information.
- In sched/wiki2: add event notification logic on job submit and completion.
- In sched/wiki2: add support for JOBWILLRUN command type.
- In sched/wiki2: for job info, include required HOSTLIST if applicable.
- In sched/wiki2: for job info, replace PARTITIONMASK with RCLASS (report
partition name associated with a job, but no task count)
- In sched/wiki2: for job and node info, report all data if TS==0,
volitile data if TS<=update_time, state only if TS>update_time
- In sched/wiki2: add support for CMD=JOBSIGNAL ARG=jobid SIGNAL=name or #
- In sched/wiki2: add support for CMD=JOBMODIFY ARG=jobid [BANK=name]
[TIMELIMIT=minutes] [PARTITION=name]
- In sched/wiki2: add support for CMD=INITIALIZE ARG=[USEHOSTEXP=T|F]
[EPORT=#]; RESPONSE=EPORT=# USEHOSTEXP=T
- In sched/wiki2: fix memory leak.
- Fix sinfo node state filtering when asking for idle nodes that are also
draining.
- Add Fortran extension to slurm_get_rem_time() API.
- Fix bug when changing the time limit of a running job that has previously
been suspended (formerly failed to account for suspend time in setting
termination time).
- fix for step allocation to be able to specify only a few nodes in a
step and ask for more that specified.
- patch from Hongjia Cao for forwarding logic
- BLUEGENE - able to allocate specific nodes without locking up.
- BLUEGENE - better tracking of blocks that are created dynamically,
less hitting the db2.
* Changes in SLURM 1.1.13
=========================
- Fix hang in sched/wiki2 if Moab stops responding responding when
response is outgoing.
- BLUEGENE - fix to make sure the block is good to go when picking it
- BLUEGENE - add libsched_if.so so mpirun doesn't try to create a block
by itself.
- Enable specification of srun --jobid=# option with --batch (for user root).
- Verify that job actually starts when requested by sched/wiki2.
- Add new wiki.conf parameters: EPort and JobAggregationTime for event
notification logic (see wiki.conf man page for details)
* Changes in SLURM 1.1.12
=========================
- Sched/wiki2 to report a job's account as COMMENT response to GETJOBS
request.
- Add srun option "--comment" (maps to job account until slurm v1.2,
needed for Moab scheduler functionality).
- fixed some timeout issues in the controller hopefully stopping all the
issues with excessive timeouts.
- unit conversion (i.e. 1024 => 1k) only happens on bgl systems for node
count.
- Sched/wiki2 to report a job's COMPETETIME and SUSPENDTIME in GETJOBS
response.
- Added support for Mellanox's version of mvapich-0.9.7.
* Changes in SLURM 1.1.11
=========================
- Update file headers adding permission to link with OpenSSL.
- Enable sched/wiki2 message authentication.
- Fix libpmi compilation issue.
- Remove "gcc-c++ python" from slurm.spec BuildRequires. It breaks
the AIX build, so we'll have to find another way to deal with that.
* Changes in SLURM 1.1.10
=========================
-- task distribution fix for steps that are smaller than job allocation.
-- BLUEGENE - fix to only send a success when block was created when trying
to allocate the block.
-- fix so if slurm_send_recv_node_msg fails on the send the auth_cred returned
by the resp is NULL.
-- Fix switch/federation plugin so backup controller can assume control
repeatedly without leaking or corrupting memory.
-- Add new error code (for Maui/Moab scheduler): ESLURM_JOB_HELD
-- Tweak slurmctld's node ping logic to better handle failed nodes with
hierarchical communications fail-over logic.
-- Add support for sched/wiki specific configuration file "wiki.conf".
-- Added sched/wiki2 plugin (new experimental wiki plugin).
* Changes in SLURM 1.1.9
========================
Christopher J. Morrone
committed
-- BLUEGENE - fix to handle a NO_VAL sent in as num procs in the job
description.
-- Fix bug in slurmstepd code for parsing --multi-prog command script.
Parser was failing for commands with no arguments.
-- Fix bug to check unsigned ints correctly in bitstring.c
-- Alter node count covert to kilo to only convert number divisible by
1024 or 512
* Changes in SLURM 1.1.8
========================
-- Added bug fixes (fault-tolerance and memory leaks) from Hongjia Cao
<hjcao@nudt.edu.cn>
-- Gixed some potential BLUEGENE issues with the bridge log file not having
a mutex around the fclose and fopen.
-- BLUEGENE - srun -n procs now regristers correctly
-- Fixed problem with reattach double allocating step_layout->tids
-- BLUEGENE - fix race condition where job is finished before it starts.
* Changes in SLURM 1.1.7
========================
-- BLUEGENE - fixed issue with doing an allocation for nodes since asking
for 32,128, or 512 all mean 1 to the controller.
Christopher J. Morrone
committed
-- Add "Include" directive to slurm.conf files. If "Include" is found
at the beginning of a line followed by whitespace and then
the full path to a file, that file is included inline with the current
slurm.conf file.
* Changes in SLURM 1.1.6
========================
-- Improved task layout for relative positions
-- Fixed heterogeous cpu overcommit issue
-- Fix bug where srun would hang if it ran on one node and that
node's slurmd died
-- Fix bug where srun task layout would be bad when min-max node range is
specified (e.g. "srun -N1-4 ...")
-- Made slurmctld_conf.node_prefix only be set on Bluegene systems.
-- Fixed a race condition in the controller to make it so a plugin thread
wouldn't be able to access the slurmctld_conf structure before it was
filled.
* Changes in SLURM 1.1.5
========================
-- Ignore partition's MaxNodes for SlurmUser and root.
-- Fix possible memory corruption with use of PMI_KVS_Create call.
-- Fix race condition when multiple PMI_KVS_Barrier calls.
-- Fix logic in which slurmctld outgoing RPC requests could get delayed.
-- Fix logic for laying out steps without a hostlist.
* Changes in SLURM 1.1.4
========================
-- Improve error handling in hierarchical communications logic.
* Changes in SLURM 1.1.3
========================
-- Fix big-endian bug in the bitstring code which plagued AIX.
-- Fix bug in handling srun's --multi-prog option, could go off end of buffer.
-- Added support for job step completion (and switch window release) on
subset of allocated nodes.
-- BLUEGENE - removed configure option --with-bg-link bridge is linked with
dlopen now no longer needing fake database so files on frontend node.
-- BLUEGENE - implemented use of rm_get_partition_info instead of
...partitions_info which has made a much better design improving stability.
-- Streamline PMI communications and increase timeouts for highly parallel
jobs. Improves scalability of PMI.
* Changes in SLURM 1.1.2
========================
-- Fix bug in jobcomp/filetxt plugin to report proper NodeCnt when a job
fails due to a node failure.
-- Fix Bluegene configure to work with the new 64bit libs.
-- Fix bug in controller that causes it to segfault when hit with a malformed
message.
-- For "srun --attach=X" to other users job, report an error and exit (it
previously just hung).
-- BLUEGENE - fix for doing correct small block logic on user error.
-- BLUEGENE - Added support in slurmd to create a fake libdb2.so if it
doesn't exist so smap won't seg fault
-- BLUEGENE - "scontrol show job" reports "MaxProcs=None" and "Start=None"
if values are not specified at job submit time
-- Add retry logic for PMI communications, may be needed for highly parallel
jobs.
-- Fix bug in slurmd where variable is used in logging message after freed
(slurmstepd rank info).
-- Fix bug in scontrol show daemons if NodeName=localhost will work now to
display slurmd as place where it is running.
-- Patch from HP for init nodes before init_bitmaps
-- ctrl-c killed sruns will result in job state as cancelled instead of
completed.
-- BLUEGENE - added configure option --with-bg-link to choose dynamic linking
or static linking with the bridgeapi.
* Changes in SLURM 1.1.1
========================
-- Fix bug in packing job suspend/resume RPC.
-- If a user breaks out of srun before the allocation takes place, mark the
job as CANCELLED rather than COMPLETED and change its start and end time
to that time.
-- Fix bug in PMI support that prevented use of second PMI_Barrier call.
This fix is needed for MVAPICH2 use.
-- Add "-V" options to slurmctld and slurmd to print version number and exit.
-- Fix scalability bug in sbcast.
-- Fix bug in cons_res allocation strategy.
-- Fix bug in forwarding with mpi
-- Fix bug sacct forwarding with stat option
-- Added nodeid to sacct stat information
-- cleaned up way slurm_send_recv_node_msg works no more clearing errno
-- Fix error handling bug in the networking code that causes the slurmd to
xassert if the server is not running when the slurmd tries to register.
* Changes in SLURM 1.1.0
========================
-- Fix bug that could temporarily make nodes DOWN when they are really
responding.
-- Fix bug preventing backup slurmctld from responding to PING RPCs.
-- Set "CFLAGS=-DISO8601" before configuration to get ISO8601 format
times for all SLURM commands. NOTE: This may break Moab, Maui, and/or
LSF schedulers.
-- Fix for srun -n and -O options when paired with -b.
Danny Auble
committed
-- Added logic for fanout to failover to forward list if main node is
unreachable
-- sacct also now keeps track of submitted, started and ending times of jobs
-- reinit config file mutex at beginning of slurmstepd to avoid fork issues
Danny Auble
committed
* Changes in SLURM 1.1.0-pre8
=============================
-- Fix bug in enforcement of partition's MaxNodes limit.
Danny Auble
committed
-- BLUEGENE - added support for srun -w option also fixed the geometry option
for srun.
Danny Auble
committed
* Changes in SLURM 1.1.0-pre7
=============================
-- Accounting works for aix systems, use jobacct/aix
-- Support large (over 2GB) files on 32-bit linux systems
Danny Auble
committed
-- changed all writes to safe_write in srun
-- added $float to globals.example in the testsuite
-- Set job's num_proc correctly for jobs that do not have exclusive use
of it's allocated nodes.
-- Change in support for test suite: 'testsuite/expect/globals.example'
is now 'testsuite/expect/globals' and you can override variable
settings with a new file 'testsuite/expect/globals.local'.
-- Job suspend now sends SIGTSTP, sleep(1), sends SIGSTOP for better
MPI support.
-- Bluegene - before assigning a job to a block the plugin will check the bps
to make sure they aren't in error state.
-- Change time format in job completion logging (JobCompType=jobcomp/filetxt)
from "MM/DD HH:MM:SS" to "YYYY-MM-DDTHH:MM:SS", conforming with the ISO8601
standard format.
* Changes in SLURM 1.1.0-pre6
=============================
-- Added logic to "stat" a running job with sacct option -S use -j to specify
job.step
Danny Auble
committed
-- removed jobacct/bluegene (no real need for this) meaning, I don't think
there is a way to gather the data yet.
-- Added support for mapping "%h" in configured SlurmdLog to the hostname.
-- Add PropagatePrioProcess to control propagation of a user's nice value
to spawned tasks (based upon work by Daniel Christians, HP).
Danny Auble
committed
* Changes in SLURM 1.1.0-pre5
=============================
-- Added step completion RPC logic
-- Vastly changed sacct and the jobacct plugin. Read documentation for full
details.
-- Added jobacct plugin for AIX and BlueGene, they currently don't work,
but infrastructure is in place.
-- Add support for srun option --ctrl-comm-ifhn to set PMI communications
address (Hongjia Cao, National University of Defense Technology).
-- Moved safe_read/write to slurm_protocol_defs.h removing multiple copies.
-- Remove vestigial functions slurm_allocate_resources_and_run() and
slurm_free_resource_allocation_and_run_response_msg().
-- Added support for different executable files and arguments by task based
upon a configuration file. See srun's --multi-prog option (based upon
work by Hongjia Cao, National University of Defense Technology).
-- moved the way forward logic waited for fanout logic mostly eliminating
problems with scalability issues.
-- changed -l option in sacct to display different params see sacct/sacct.h
for details.
Danny Auble
committed
* Changes in SLURM 1.1.0-pre4
=============================
-- Bluegene specific - Added support to set bluegene block state to
free/error via scontrol update BlockName
-- Add needed symbol to select/bluegene in order to load plugin.
Danny Auble
committed
* Changes in SLURM 1.1.0-pre3
=============================
-- Added framework for XCPU job launch support.
Christopher J. Morrone
committed
-- New general configuration file parser and slurm.conf handling code.
Allows long lines to be continued on the next line by ending with a "\".
Whitespace is allowed between the key and "=", and between the "=" and
value.
WARNING: A NodeName may now occur only once in a slurm.conf file.
If you want to temporarily make nodes DOWN in the slurm.conf,
use the new DownNodes keyword (see "man slurm.conf").
-- Gracefully handle request to submit batch job from within an existing
batch job.
Moe Jette
committed
-- Warn user attempting to create a job allocation from within an existing job
allocation.
-- Add web page description for proctrack plugin.
-- Add new function slurm_get_rem_time() for job's time limit.
-- JobAcct plugin renamed from "log" to "linux" in preparation for support of
new system types.
WARNING: "JobAcctType=jobacct/log" is no longer supported.
-- Removed vestigal 'bg' names from bluegene plugin and smap
-- InactiveLimit parameter is not enforced for RootOnly partitions.
-- Update select/cons_res web page (Susanne Balle, HP,
cons_res_doc_patch_3_29_06).
-- Build a "slurmd.test" along with slurmd. slurmd.test has the path to
slurmstepd set allowing it to run unmodified out of the builddir for
testing (Mark Grondona).
* Changes in SLURM 1.1.0-pre2
=============================
-- Added "bcast" command to transmit copies of a file to compute nodes
with message fanout.
-- Bluegene specific - Added support for overlapping partitions and
dynamic partitioning.
-- Bluegene specific - Added support for nodecard sized blocks.
-- Added logic to accept 1k for 1024 and so on for --nodes option of srun.
This logic is through display tools such as smap, sinfo, scontrol, and
squeue.
-- Added bluegene.conf man page.
-- Added support for memory affinity, see srun --mem_bind option.
* Changes in SLURM 1.1.0-pre1
=============================
-- New --enable-multiple-slurmd configure parameter to allow running
more than one copy of slurmd on a node at the same time. Only
really useful for developers.
-- New communication is now branched on all processes to slurmd's from
slurmctld and srun launch command. This is done with a tree type
algorithm. Spawn and batch mode work the same as before. New slurm.conf
variable TreeWidth=50 is default. This is the number of threads per
-- Configuration parameter HeartBeatInterval is depracated. Now used half
of SlurmdTimeout and SlurmctldTimeout for communications to slurmd and
slurmctld daemons repsectively.
-- Add hash tables for select/cons_res plugin (Susanne Balle, HP,
patch_02222006).
-- Remove some use of cr_enabled flag in slurmctld job record, use
new flag "test_only" in select_g_job_test() instead.
Christopher J. Morrone
committed
* Changes in SLURM 1.0.17
=========================
-- Set correct user groups for task epilogs.
-- Add more debugging for tracking slow slurmd job initiations
(slurm.hp.replaydebug.patch).
Christopher J. Morrone
committed
* Changes in SLURM 1.0.16
=========================
-- For "srun --attach=X" to other users job, report an error and exit (it
previously just hung).
-- Make sure that "scancel -s KILL" terminates the job just like "scancel"
including deletion of all job steps (Chris Holmes, HP, slurm,patch).
-- Recognize ISO-8859 input to srun as a script (for non-English scripts).
-- switch/elan: Fix bug in propagation of ELAN_STATKEY environment variable.
Christopher J. Morrone
committed
-- Fix bug in slurmstepd IO code that can result in it spinning if a
certain error occurs.
Christopher J. Morrone
committed
-- Remove nodes from srun's required node list if their count exceeds
the number of requested tasks.
-- sched/backfill to schedule around jobs that are hung in a completing
state.
-- Avoid possibly re-running the epilog for a job on slurmctld restart or
reconfig by saving and restoring a hostlist of nodes still completing
the job.
* Changes in SLURM 1.0.15
=========================
-- In srun, reset stdin to blocking mode (if it was originally blocking before
we set it to O_NONBLOCK) on exit to avoid trouble with things like running
srun under a bash shell in an emacs *shell* buffer.
-- Fix srun race condition that occasionally causes segfaults at shutdown
-- Fix obscure locking issues in log.c code.
-- Explicitly close IO related sockets. If an srun gets "stuck", possibly
because of unkillable tasks in its job step, it will not hold many TCP
sockets in the CLOSE_WAIT state.
-- Increase the SLURM protocol timeout from 5 seconds to 10 seconds.
(In 1.2 there will be a slurm.conf parameter for this, rather than having
it hardcoded.)
* Changes in SLURM 1.0.14
=========================
-- Fix for bad xfree() call in auth/munge which can raise an assert().
-- Fix installed fork handlers for the conf mutex for slurmd and slurmstepd.
* Changes in SLURM 1.0.13
=========================
-- Fix for AllowGroups option to work when the /etc/group file doesn't
contain all users in group by adding the uids of the names in /etc/passwd
that have a gid of that which we are looking for.
-- Fix bug in InactiveLimit support that can potentially purge active jobs.
NOTE: This is highly unlikely except on very large AIX clusters.
-- Fix bug for reiniting the config_lock around the control_file in
slurm_protocol_api.c logic has changed in 1.1 so no need to merge
* Changes in SLURM 1.0.12
=========================
-- Report node state of DRAIN rather than DOWN if DOWN with DRAIN flag set.
-- Initialize job->mail_type to 0 (NONE) for job submission.
-- Fix for stalled task stdout/stderr when buffered I/O is used, and
a single line exceeds 4096 bytes.
-- Memory leak fixes for maui plugin (hjcao@nudt.edu.cn)
Christopher J. Morrone
committed
-- Fix for spinning srun when the terminal to which srun is talking
goes away.
-- Don't set avail_node_bitmap for DRAINED nodes on slurmctld reconfig
(can schedule a job on drained node after reconfig).
Christopher J. Morrone
committed
* Changes in SLURM 1.0.11
=========================
-- Fix for slurmstepd hang when launching a task. (Needed to install
list library's atfork handlers).
-- Fix memory leak on AIX (and possibly other architectures) due to
missing pthread_attr_destroy() calls.
-- Fix rare task standard I/O setup bug. When the bug hit, stdin, stdout,
Christopher J. Morrone
committed
or stderr could be an invalid file descriptor.
-- General slurmstepd file descriptor cleanup.
-- Fix memory leak in job accounting logic (Andy Riebs, HP, memory_leak.patch).
Christopher J. Morrone
committed
* Changes in SLURM 1.0.10
=========================
-- Fix for job accounting logic submitted from Andy Riebs to handle issues
with suspending jobs and such. patch file named requeue.patch
-- Make select/cons_res interoperate with mpi/lam plugin for task counts.
-- Fix race condition where srun could seg-fault due to use of logging functions
within pthread after calling log_fini.
-- Code changes for clean build with gcc 2.96 (gcc_2_96.patch, Takao Hatazaki, HP).
-- Add CacheGroups configuration support in configurator.html (configurator.patch,
Takao Hatazaki, HP).
-- Fix bug preventing use of mpich-gm plugin (mpichgm.patch, Takao Hatazaki, HP).
* Changes in SLURM 1.0.9
========================
-- Fix job accounting logic to open new log file on slurmctld reconfig.
(Andy Riebs, slurm.hp.logfile.patch).
-- Fix bug which allows a user to run a batch script on a node not allocated
by the slurmctld.
-- Fix poe MP_HOSTFILE handling bug on AIX.
* Changes in SLURM 1.0.8
========================
-- Fix to communication between slurmd and slurmstepd to allow for partial
reads and writes on their communication pipes.
* Changes in SLURM 1.0.7
========================
-- Change in how AuthType=auth/dummy is handled for security testing.
-- Fix for bluegene systems to allow full system partitions to stay booted
when other jobs are submitted to the queue.
* Changes in SLURM 1.0.6
========================
-- Prevent slurmstepd from crashing when srun attaches to batch job.
* Changes in SLURM 1.0.5
========================
-- Restructure logic for scheduling BlueGene small block jobs. Added
"test_only" flag to select_p_job_test() in select plugin.
-- Correct squeue "NODELIST" output for BlueGene small block jobs.
-- Fix possible deadlock situations on BlueGene plugin on errors.
* Changes in SLURM 1.0.4
========================
-- Release job allocation if step creation fails (especially for BlueGene).
-- Fix bug select/bluegene warm start with changed bglblock layout.
-- Fix bug for queuing full-system BlueGene jobs.
* Changes in SLURM 1.0.3
========================
-- Fix bug that could refuse to queue batch jobs for BlueGene system.
-- Add BlueGene plugin mutex lock for reconfig.
-- Ignore BlueGene bgljobs in ERROR state (don't try to kill).
-- Fix job accounting for batch jobs (Andy Riebs, HP,
slurm.hp.jobacct_divby0a.patch).
-- Added proctrack/linuxproc.so to the main RPM.
-- Added mutex around bridge api file to avoid locking up the api.
-- BlueGene mod: Terminate slurm_prolog and slurm_epilog immediately if
SLURM_JOBID environment variable is invalid.
-- Federation driver: allow selection of a sepecific switch interface
(sni0, sni1, etc.) with -euidevice/MP_EUIDEVICE.
-- Return an error for "scontrol reconfig" if there is already one in
progress
* Changes in SLURM 1.0.2
========================
-- Correctly report DRAINED node state as type OTHER for "sinfo --summarize".
-- Fixes in sacct use of malloc (Andy Riebs, HP, sacct_malloc.patch).
-- Smap mods: eliminate screen flicker, fix window resize, report more clear
message if window too small (Dan Palermo, HP, patch.1.0.0.1.060126.smap).
-- Sacct mods for inconsistent records (race condition) and replace --debug
option with --verbose (Andy Riebs, HP, slurm.hp.sacct_exp_vvv.patch).
-- scancel of a job step will now send a job-step-completed message
to the controller after verifying that the step has completed on all nodes.
-- Fix task layout bug in srun.
-- Added times to node "Reason" field when set down for insufficient
resources or if not responding.
-- Validate operation with Elan switch and heterogeneous nodes.
* Changes in SLURM 1.0.1
========================
-- Assorted updates and clarifications in documentation.
-- Detect which munge installation to use 32/64 bit.
-- Fix sinfo filtering bug, especially "sinfo -R" output.
-- Fix node state change bug, resuming down or drained nodes.
-- Fix "scontrol show config" to display JobCredentialPrivateKey instead
of JobCredPrivateKey and JobCredentialPublicCertificate instead of
JobCredPublicKey. They now match the options in the slurm.conf.
-- Fix bug in job accounting for very long node list records (Andy Riebs,
HP, sacct_buf.patch).
-- BLUEGENE SPECIFIC - added load function to smap to load an already
exsistant bluegene.conf file.
-- Fix bug in sacct: If user requests specific job or job step ID,
only the last one with that ID will be reported. If multiple
nodes fail, the job has its state recorded as "JOB_TERMINATED...nf"
(Andy Riebs, HP, slurm.hp.sacct_dup.patch).
-- Fix some inconsistencies in sacct's help message (Andy Riebs, HP,
slurm.hp.sacct_help.patch).
-- Validate input to sacct command and allows embedded spaces in
arguments (Andy Riebs, HP, slurm.hp.sacct_validate.patch).
* Changes in SLURM 0.7.0-pre8
=============================
-- BGL specific -- bug fix for smap configure function down configuration
Christopher J. Morrone
committed
-- Add slurmd cache for group IDs (Takao Hatazaki, HP).
-- Fix bug in processing of "#SLURM" batch script option parsing.
* Changes in SLURM 0.7.0-pre7
=============================
-- Fix issue with NODE_STATE_COMPLETING, could start job on node before
epilog completed.
-- Added some infrastructure for job suspend/resume (scontrol, api, and
slurmctld stub).
-- Set job's num_procs to the actual processor count allocated to the job.
-- Fix bug in HAVE_FRONT_END support for cluster emulation.
* Changes in SLURM 0.7.0-pre6
=============================
-- Added support for task affinity for binding tasks to CPUs (Daniel
Palermo, HP).
-- Integrate task affinity support with configuration, add validation
test.
* Changes in SLURM 0.7.0-pre5
=============================
-- Enhanced performance and debugging for slurmctld reconfiguration.
-- Add "scontrol update Jobid=# Nice=#" support.
-- Basic slurmctld and tool functionality validated to 16k nodes.
-- squeue and smap now display correct info for jobs in bluegene enviornment.
-- Fix setting of SLURM_NODELIST for batch jobs.
-- Add SubmitTime to job information available for display.
-- API function slurm_confirm_allocation() has been marked OBSOLETE
and will go away in some future version of SLURM. Use
-- New API calls slurm_signal_job and slurm_signal_job_step to send
signals directly to the slurmds without triggering the shutdown sequence.
-- remove "uid" from old_job_alloc_msg_t, no longer needed.
-- Several bug fixes in maui scheduler plugin from Dave Jackon
(Cluster Resources).
* Changes in SLURM 0.7.0-pre4
=============================
-- Remove BNR libary functions and add those for PMI (KVS and basic
MPI-1 functions only for now)
-- Added Hostfile support for POE and srun. MP_HOSTFILE env var to set
location of hostfile. Tasks will run from list order in the file.
-- Removes the slurmd's use of SysV shared memory. Instead the slurmd
communicates with the slurmstepd processes through the slurmstepd's
new named unix domain socket. The "stepd_api" is used to talk to the
slurmstepd (src/slurmd/common/stepd_api.[ch]).
-- Bluegene specific - bluegene block allocator will find most any
partition size now. Added support to start at any point in smap
to request a partition instead of always starting at 000.
-- Bluegene specific - Support to smap to down or bring up nodes in
configure mode. Added commands include allup, alldown,
up [range], down [range]
-- Time format in sinfo/squeue/smap/sacct changed from D:HH:MM:SS to
D-HH:MM:SS per POSIX standards document.
-- Treat scontrol update request without any requested changes as an
error condition.
-- Bluegene plugin renamed with BG instead of BGL. partition_allocator moved
into bluegene plugin and renamed block_allocator. Format for bluegene.conf
file changed also. Read bluegene html page. Code is backwards compatable
smap will generate in new form
-- Add srun option --nice to give user some control over job priority.
* Changes in SLURM 0.7.0-pre3
=============================
-- Restructure node states: DRAINING and DRAINED states are replaced
with a DRAIN flag. COMPLETING state is changed to a COMPLETING flag.
-- Test suite moved into testsuite/expect from separate repository.
-- Added new document describing slurm APIs (doc/html/api.html).
-- Permit nodes to be in multiple partitions simultaneously.
* Changes in SLURM 0.7.0-pre2
=============================
-- New stdio protocol. Now srun has just a single TCP stream to each node
of a job-step. srun and slurmd comminicate over the TCP stream using a
simple messaging protocol.
-- Added task plugin and use task prolog/epilog(s).
-- New slurmd_step functionality added. Fork exec instead of using shared
memory. Not completely tested.
-- BGL small partition logic in place in plugin and smap. Scheduler needs
to be rewritten to handle multiple partitions on a single node. No
documentation written on process yet.
-- If running select/bluegene plugin without access to BGL DB2, then
full-system bglblock is of system size defined in bluegene.conf.
* Changes in SLURM 0.7.0-pre1
=============================
-- Support defered initiation of job (e.g. srun --begin=11:30 ...).
-- Add support for srun --cpus-per-task through task allocation in
slurmctld.
-- fixed partition_allocator to work without curses
-- made change to srun to start message thread before other threads
to make sure localtime doesn't interfere.
-- Added new RPCs for slurmctld REQUEST_TERMINATE_JOB or TASKS,
REQUEST_KILL_JOB/TASKS changed to REQUEST_SIGNAL_JOB/TASKS.
-- Add support for e-mail notification on job state changes.
-- Some infrastructure added for task launch controls (slurm.conf:
TaskProlog, TaskEpilog, TaskPlugin; srun --task-prolog, --task-epilog).
* Changes in SLURM 0.6.11
=========================
-- Fix bug in sinfo partition sorting order.
-- Fix bugs in srun use of #SLURM options in batch script.
-- Use full Elan credential space rather than re-using credentials as soon
as job step completes (helps with fault-tolerance).
* Changes in SLURM 0.6.10
=========================
-- Fix for slurmd job termination logic (could hang in COMPLETING state).
-- Sacct bug fixes: Report correct user name for job step, show "uid.gid"
as fifth field of job step record (Andy Riebs, slurm.hp.sacct_uid.patch).
-- Add job_id to maui scheduler plugin start job status message.
-- Fix for srun's handling of null characters in stdout or stderr.
-- Update job accounting for larger systems (Andy Riebs, uptodate.patch).
Christopher J. Morrone
committed
-- Fixes for proctrack/linuxproc and mpich-gm support (Takao Hatazaki, HP).
-- Fix bug in switch/elan for large task count job having irregular task
distribution across nodes.
* Changes in SLURM 0.6.9
========================
-- Fix bug in mpi plugin to set the ID correctly
-- Accounting bug causing segv fixed (Andy Riebs, 14oct.jobacct.patch)
-- Fix for failed launch of a debugged job (e.g. bad executable name).
-- Wiki plugin fix for tracking allocated nodes (Ernest Artiaga, BSC).
-- Fix memory leaks in slurmctld and federation plugin.
-- Fix sefault in federation plugin function fed_libstate_clear().
-- Align job accounting data (Andy Riebs, slurm.hp.unal_jobacct.patch)
-- Restore switch state in backup controller restarts
* Changes in SLURM 0.6.8
========================
-- Invalid AllowGroup value in slurm.conf to not cause seg fault.
-- Fix bug that would cause slurmctld to seg-fault with select/cons_res
and batch job containing more than one step.
Moe Jette
committed
* Changes in SLURM 0.6.7
========================
-- Make proctrack/linuxproc thread safe, could cause slurmd seg fault.
-- Propagate umask from srun to spawned tasks.
-- Fix problem in switch/elan error handling that could hang a slurmd
step manager process.
-- Build on AIX with -bmaxdata:0x70000000 for memory limit more than 256MB.
-- Restore srun's return code support.
Moe Jette
committed
Moe Jette
committed
* Changes in SLURM 0.6.6
========================
-- Fix for bad socket close() in the spawn-io code.
Moe Jette
committed
* Changes in SLURM 0.6.5
========================
-- Sacct to report on job steps that never actually started.
-- Added proctrack/rms to elan rpm.
-- Restructure slurmctld/agent.c logic to insure timely reaping of
terminating pthreads.
-- Srun not to hang if job fails before task launches not all completed.
Moe Jette
committed
-- Fix for consumable resources properly scheduling nodes that have more
nodes than configured (Susanne Balle, HP, cons_res_patch.10.14.2005)
Moe Jette
committed
* Changes in SLURM 0.6.4
========================
-- Bluegene plugin drains an entire bglblock on repeated boot failures
only if it has not identified a specific node as being bad.
* Changes in SLURM 0.6.3
========================
-- Fix slurmctld mem leaks (step name and hostlist struct).
-- Bluegene plugin sets end time for job terminated due to removed
bglblock.
* Changes in SLURM 0.6.2
========================
-- Fix sinfo and squeue formatting to properly handle slurm nodes,
jobs, and other names containing "%".
* Changes in SLURM 0.6.1
========================
-- Fixed smap -Db to display slurm partitions correctly (take 2).
-- Add srun fork() retry logic for very heavily loaded system.
-- Fix possible srun hang on task launch failure.
-- Add support for mvapich v0.9.4, 0.9.5 and gen2.
* Changes in SLURM 0.6.0
========================
-- Add documentation for ProctrackType=proctrack/rms.
-- Make proctrack/rms be the default for switch/elan.
-- Do not preceed SIGKILL or SIGTERM to job step with (non-requested) SIGCONT.
-- Fixed smap -Db to display slurm partitions correctly.
-- Explicitly disallow ProctrackType=proctrack/linuxproc with
SwitchType=switch/elan. They will not work properly together.
* Changes in SLURM 0.6.0-pre8
=============================
-- Remove debugging xassert in switch/federation that were accidentally
committed
-- Make slurmd step manager retry slurm_container_destroy() indefinitely
instead of giving up after 30 seconds. If something prevents a job
step's processes from being killed, the job will be stuck in the
completing until the container destroy succeeds.
* Changes in SLURM 0.6.0-pre7
=============================
-- Disable localtime_r() calls from forked processes (semaphore set
in another pthread can deadlock calls to localtime_r made from
the forked process, this will be properly fixed in the next
major release of SLURM).
-- Added SLURM_LOCALID environment variable for spawned tasks
(Dan Palermo, HP).
-- Modify switch logic to restore state based exclusively upon
recovered job steps (not state save file).
-- Gracefully refuse job if there are too many job steps in slurmd.
-- Fix race condition in job completion that can leave nodes in
COMPLETING state after job is COMPLETED.
-- Added frees for BGL BrigeAPI strdups that were to this point unknown.
-- smap scrolls correctly for BGL systems.
-- slurm_pid2jobid() API call will now return the jobid for a step
manager slurmd process.
* Changes in SLURM 0.6.0-pre6
=============================
-- Added logic to return scheduled nodes to Maui scheduler (David
Jackson, Cluster Resources)
-- Fix bug in handling job request with maximum node count.
-- Fix node selection scheduling bug with heterogeneous nodes and
srun --cpus-per-task option
-- Generate error file to note prolog failures.
* Changes in SLURM 0.6.0-pre5
=============================
-- Modify sfree (BGL command) so that --all option no longer requires
an argument.
-- Modify smap so it shows all nodes and partitions by default (even
nodes that the user can't access, otherwise there are holes in
its maps).
-- Added module to parse time string (src/common/parse_time.c) for
future use.
-- Fix BlueGene hostlist processing for non-rectangular prisms and
add string length checking.
-- Modify orphan batch job time calculation for BGL to account for
slowness when booting many bglblocks at the same time.
* Changes in SLURM 0.6.0-pre4
=============================
-- Added etc/slurm.epilog.clean to kill processes initiated outside of
slurm when a user's last job on a node terminates.
-- Added config.xml and configurator.html files for use by OSCAR.
-- Increased maximum job step count from 64 to 130 for BGL systems only.
Christopher J. Morrone
committed
=============================
-- Add code so job request for shared nodes gets explicitly requested
nodes, but lightly loaded nodes otherwise.
-- Add job step name field.
-- Add job step network specification field.
-- Add proctrack/rms plugin
-- Change the proctrack API to send a slurmd_job_t pointer to both
slurm_container_create() and slurm_container_add(). One of those
functions MUST set job->cont_id.
-- Remove vestigial node_use (virtual or coprocessor) field from job
request RPC.
-- Fix mpich-gm bugs, thanks to Takao Hatazaki (HP).
-- Fix code for clean build with gcc 2.96, Takao Hatazaki (HP).
-- Add node update state of "RESUME" to return DRAINED, DRAINING, or
DOWN node to service (IDLE or ALLOCATED state).
-- smap keeps trying to connect to slurmctld in iterative mode rather
than just aborting on failure.
-- Add squeue option --node to filter by node name.
-- Modify squeue --user option to accept not only user names, but also
user IDs.
* Changes in SLURM 0.6.0-pre2
=============================
-- Removed "make rpm" target.
Christopher J. Morrone
committed
* Changes in SLURM 0.6.0-pre1
=============================
-- Added bgl/partition_allocator/smap changes from 0.5.7.
-- Added configurable resource limit propagation (Daniel Christians, HP).
-- Changed SlurmUser ID from 16-bit to 32-bit.
-- Added MpiDefault slurm.conf parameter.
-- Remove KillTree configuration parameter (replace with
"ProctrackType=proctrack/linuxproc")
-- Remove MpichGmDirectSupport configuration parameter (replace with
"MpiDefault=mpich-gm")
-- Make default plugin be "none" for mpi.
-- Added mpi/none plugin and made it the default.
-- Replace extern program_invocation_short_name with program_invocation_name
due to short name being truncated to 16 bytes on some systems.
-- Added support for Elan clusters with different CPU counts on nodes
(Chris Holmes, HP).
-- Added Consumable Resources web page (Susanne Balle, HP).
-- "Session manager" slurmd process has been eliminated.
-- switch/federation fixes migrated from 0.5.*
-- srun pthreads really set detached, fixes scaling problem
-- srun spawns message handler process so it can now be stopped (via
Ctrl-Z or TotalView) without inducing failures.
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
* Changes in SLURM 0.5.7
========================
-- added infrastructure for (eventual) support of AIX checkpointing
of slurm batch and interactive poe jobs
-- added wiring for BGL to do wiring for physical location first and then
logical.
-- only one thread used to query database before polling thread is there.
* Changes in SLURM 0.5.6
========================
-- fix for BGL hostnames and full system partition finding
* Changes in SLURM 0.5.5
========================
-- Increase SLURM_MESSAGE_TIMEOUT_MSEC_STATIC to 15000
-- Fix for premature timeout in _slurm_send_timeout
-- Fix for federation overlapping calls to non-thread-safe _get_adapters
* Changes in SLURM 0.5.4
========================
-- Added support for no reboot for VN to CO on BGL
-- Fix for if a job starts after it finishes on BGL
* Changes in SLURM 0.5.3
========================
-- federation patch so the slurm controller has sane window status at
start-up regardless of the window status reported in the slurmd
registration.
-- federation driver exits with fatal() if the federation driver can not
find all of the adapters listed in the federation.conf
* Changes in SLURM 0.5.2
========================
-- Extra federation driver sanity checks
* Changes in SLURM 0.5.1
========================
-- Fix federation driver bad free(), other minor fed fixes
-- Allow slurm to parse very long lines in the slurm.conf
* Changes in SLURM 0.5.0
========================
-- Fix race condition in job accouting plugin, could hang slurmd
-- Report SlurmUser id over 16 bits as an error (fix on v0.6)
* Changes in SLURM 0.5.0-pre19
==============================
-- Fix memory management bug in federation driver
* Changes in SLURM 0.5.0-pre18
==============================
-- elan switch plugin memory leak plugged
-- added g_slurmctld_jobacct_fini() to release all memory (useful
to confirm no memory leaks)
-- Fix slurmd bug introduced in pre17
* Changes in SLURM 0.5.0-pre17
==============================
-- slurmd calls the proctrack destroy function at job step completion
-- federation driver tries harder to clean up switch windows
Christopher J. Morrone
committed
* Changes in SLURM 0.5.0-pre16
==============================
-- Check slurm.conf values for under/overflows (some are 16 bit values).
Christopher J. Morrone
committed
-- Federation driver clears windows at job step completion
-- Modify code for clean build with gcc v4.0
Christopher J. Morrone
committed
-- New SLURM_NETWORK environmant variable used by slurm_ll_api
Christopher J. Morrone
committed
* Changes in SLURM 0.5.0-pre15
==============================
-- Added "network" field to "scontrol show job" output.
-- Federation fix for unfreed windows when multiple adapters on
one node use the same LID
* Changes in SLURM 0.5.0-pre14
==============================