Enable per-partition gang scheduling resource resolution (e.g. the partition
can have SelectTypeParameters=CR_CORE, while the global value is CR_SOCKET).
bug 1299

Added the user name rather than just printing the user ID number.
Fixed the format for a job array record ("_" rather than "." separator):
Added a GRES field.

Properly enforce partition Shared=YES option. Previously oversubscribing
resources required gang scheduling to also be configured.

Prevent invalid job array task ID value if a task is started using gang
scheduling (i.e. the task starts in a SUSPENDED state). The task ID gets
set to NO_VAL and the task string is also cleared.

Prevent a job manually suspended from being resumed by gang scheduler once
free resources are available.
bug 1335

Now that slurm is checking that the job's ntasks_per_core is valid,
this tests bad value was causing the job submit to fail. Change
the option to use ntasks_per_socket instead, which matches the
test logic.

we have hit the following problem that seems to be present in Slurm
slurm-14-11-2-1 and previous versions. When a node is reserved and an
overlapping maint reservation is created and later deleted the scontrol
output will report the node as IDLE rather than RESERVED:

+ scontrol show node node1
+ grep State
   State=IDLE ThreadsPerCore=1 TmpDisk=0 Weight=1
+ scontrol create reservation starttime=now duration=120 user=usr01000
nodes=node1 ReservationName=X
Reservation created: X
+ sleep 10
+ scontrol show nodes node1
+ grep State
   State=RESERVED ThreadsPerCore=1 TmpDisk=0 Weight=1
+ scontrol create reservation starttime=now duration=120 user=usr01000
nodes=ALL flags=maint,ignore_jobs ReservationName=Y
Reservation created: Y
+ sleep 10
+ grep State
+ scontrol show nodes node1
   State=MAINT ThreadsPerCore=1 TmpDisk=0 Weight=1
+ scontrol delete ReservationName=Y
+ sleep 10
+ scontrol show nodes node1
+ grep State
*   State=IDLE ThreadsPerCore=1 TmpDisk=0 Weight=1*
+ scontrol delete ReservationName=X
+ sleep 10
+ scontrol show nodes node1
+ grep State
   State=IDLE ThreadsPerCore=1 TmpDisk=0 Weight=1

Note that the after the deletion of reservation "X" the State=IDLE
instead of State=RESERVED. I think that the delete_resv() function in
slurmctld/reservation.c should call set_node_maint_mode(true) like
update_resv() does. With the patch pasted at the end of this e-mail I
get the following output which matches my expectation:

+ scontrol show node node1
+ grep State
   State=IDLE ThreadsPerCore=1 TmpDisk=0 Weight=1
+ scontrol create reservation starttime=now duration=120 user=usr01000
nodes=node1 ReservationName=X
Reservation created: X
+ sleep 10
+ scontrol show nodes node1
+ grep State
   State=RESERVED ThreadsPerCore=1 TmpDisk=0 Weight=1
+ scontrol create reservation starttime=now duration=120 user=usr01000
nodes=ALL flags=maint,ignore_jobs ReservationName=Y
Reservation created: Y
+ sleep 10
+ scontrol show nodes node1
+ grep State
   State=MAINT ThreadsPerCore=1 TmpDisk=0 Weight=1
+ scontrol delete ReservationName=Y
+ sleep 10
+ scontrol show nodes node1
+ grep State
*   State=RESERVED ThreadsPerCore=1 TmpDisk=0 Weight=1*
+ scontrol delete ReservationName=X
+ sleep 10
+ scontrol show nodes node1
+ grep State
   State=IDLE ThreadsPerCore=1 TmpDisk=0 Weight=1

Thanks,
Dorian

Bug introduced earlier today with new logic in
commit 54396196

Correct parsing of AccountingStoragePass when specified in old format
(just a path name)

If a job specifies ntasks_per_core and/or ntasks_per_socket, deny
use of nodes which lack sufficient resources. Previously this was
ignored.
bug 1296

Bug 1331

Intel MPI, on MPI jobs initialisation through PMI, uses to call PMI_KVS_Put()
many many times from task at rank 0, and each on these call is followed by
PMI_KVS_Commit(). Slurm implementation of PMI_KVS_Commit() imposes a delay
to avoid DDOS on original srun. This delay is proportional to the total number.
It could be up to 3 secs for large jobs for ex. with 7168 tasks. Therefore,
when Intel MPI calls PMI_KVS_Commit() 475 times (mesured on a test case) from
task at rank 0, 28 minutes are spent in delay function.
All other tasks in the job are waiting for a PMI_Barrier. Therefore, there is
no risk for a DDOS from this single task 0. The patch alters the delaying time
calculation to make sure task at rank 0 will does not be delayed. All other
tasks are globally spreaded in the same time range as before.

This moves a bzero() call checked in with commit 30e45f8a
I also noticed that test1.14 was generating errors like this
"srun: error: cpus_per_node array is not set"
This was due to previously uninitialized variables now being
cleared by bzero (i.e. the old data was garbage, but avoided
the error message). The properly cleared variables were introduced
in commit 0252a63e
bug 1306

This is a correction to commit 0252a63e
Previous logic failed to populate data structure as used in another RPC
bug 1306

    of Slurm daemons.

The slurmstepd still needs to be fixed, which most likely can't be fixed
until 15.08.

Purge temporary files for purged jobs
Improve fault-tolerance of pthread_create() errors
Add more states (running, teardown, complete)
Trigger job scheduler upon stage-in completion
Remove attempt to periodically load state info for individual jobs
set time stamp on job record state changes

of Slurm daemons.

instead of only in the DBD.  We also make it possible for Operators to
manage WCKeys instead of just admins.

instead of only in the DBD.

instead of only in the DBD.