PlotEquiMap.R 51 KB
Newer Older
#'Maps A Two-Dimensional Variable On A Cylindrical Equidistant Projection
#'
#'Map longitude-latitude array (on a regular rectangular or gaussian grid) 
#'on a cylindrical equidistant latitude and longitude projection with coloured 
#'grid cells. Only the region for which data has been provided is displayed. 
#'A colour bar (legend) can be plotted and adjusted. It is possible to draw 
#'superimposed arrows, dots, symbols, contour lines and boxes. A number of 
#'options is provided to adjust the position, size and colour of the 
aho's avatar
aho committed
#'components. Some parameters are provided to add and adjust the masks that
#'include continents, oceans, and lakes. This plot function is compatible with
#'figure layouts if colour bar is disabled.
#'
#'@param var Array with the values at each cell of a grid on a regular 
#'  rectangular or gaussian grid. The array is expected to have two 
#'  dimensions: c(latitude, longitude). Longitudes can be in ascending or 
#'  descending order and latitudes in any order. It can contain NA values 
#'  (coloured with 'colNA'). Arrays with dimensions c(longitude, latitude) 
#'  will also be accepted but 'lon' and 'lat' will be used to disambiguate so 
#'  this alternative is not appropriate for square arrays. It is allowed that
#'  the positions of the longitudinal and latitudinal coordinate dimensions 
#'  are interchanged.
#'@param lon Numeric vector of longitude locations of the cell centers of the 
#'  grid of 'var', in ascending or descending order (same as 'var'). Expected 
#'  to be regularly spaced, within either of the ranges [-180, 180] or 
#'  [0, 360]. Data for two adjacent regions split by the limits of the 
#'  longitude range can also be provided, e.g. \code{lon = c(0:50, 300:360)} 
#'  ('var' must be provided consitently).
#'@param lat Numeric vector of latitude locations of the cell centers of the 
#'  grid of 'var', in any order (same as 'var'). Expected to be from a regular 
#'  rectangular or gaussian grid, within the range [-90, 90].
#'@param varu Array of the zonal component of wind/current/other field with 
#'  the same dimensions as 'var'. It is allowed that the positions of the 
#'  longitudinal and latitudinal coordinate dimensions are interchanged.
#'@param varv Array of the meridional component of wind/current/other field 
#'  with the same dimensions as 'var'. It is allowed that the positions of the 
#'  longitudinal and latitudinal coordinate dimensions are interchanged.
#'@param toptitle Top title of the figure, scalable with parameter 
#'  'title_scale'.
#'@param sizetit Scale factor for the figure top title provided in parameter 
#'  'toptitle'. Deprecated. Use 'title_scale' instead.
#'@param units Title at the top of the colour bar, most commonly the units of 
#'  the variable provided in parameter 'var'.
#'@param brks,cols,bar_limits,triangle_ends Usually only providing 'brks' is 
#'  enough to generate the desired colour bar. These parameters allow to 
#'  define n breaks that define n - 1 intervals to classify each of the values 
#'  in 'var'. The corresponding grid cell of a given value in 'var' will be 
#'  coloured in function of the interval it belongs to. These parameters are 
#'  sent to \code{ColorBar()} to generate the breaks and colours. Additional 
#'  colours for values beyond the limits of the colour bar are also generated 
#'  and applied to the plot if 'bar_limits' or 'brks' and 'triangle_ends' are 
#'  properly provided to do so. See ?ColorBar for a full explanation.
#'@param col_inf,col_sup,colNA Colour identifiers to colour the values in 
#'  'var' that go beyond the extremes of the colour bar and to colour NA 
#'  values, respectively. 'colNA' takes attr(cols, 'na_color') if available by 
#'  default, where cols is the parameter 'cols' if provided or the vector of 
#'  colors returned by 'color_fun'. If not available, it takes 'pink' by 
#'  default. 'col_inf' and 'col_sup' will take the value of 'colNA' if not 
#'  specified. See ?ColorBar for a full explanation on 'col_inf' and 'col_sup'.
#'@param color_fun,subsampleg,bar_extra_labels,draw_bar_ticks Set of 
#'  parameters to control the visual aspect of the drawn colour bar 
#'  (1/3). See ?ColorBar for a full explanation.
#'@param draw_separators,triangle_ends_scale,bar_label_digits Set of 
#'  parameters to control the visual aspect of the drawn colour bar 
#'  (2/3). See ?ColorBar for a full explanation.
#'@param bar_label_scale,units_scale,bar_tick_scale,bar_extra_margin Set of  
#'  parameters to control the visual aspect of the drawn colour bar (3/3). 
#'  See ?ColorBar for a full explanation.
#'@param square Logical value to choose either to draw a coloured square for 
#'  each grid cell in 'var' (TRUE; default) or to draw contour lines and fill 
#'  the spaces in between with colours (FALSE). In the latter case, 
#'  'filled.continents' will take the value FALSE if not specified.
#'@param filled.continents Colour to fill in drawn projected continents. 
#'  Takes the value gray(0.5) by default or, if 'square = FALSE', takes the 
#'  value FALSE. If set to FALSE, continents are not filled in.
aho's avatar
aho committed
#'@param filled.oceans A logical value or the color name to fill in drawn 
#'  projected oceans. The default value is FALSE. If it is TRUE, the default
aho's avatar
aho committed
#'  colour is "light blue".
#'@param country.borders A logical value indicating if the country borders 
#'  should be plotted (TRUE) or not (FALSE). It only works when 
#'  'filled.continents' is FALSE. The default value is FALSE.
#'@param coast_color Colour of the coast line of the drawn projected continents.
#'   Takes the value gray(0.5) by default.
#'@param coast_width Line width of the coast line of the drawn projected 
#'  continents. Takes the value 1 by default.
#'@param lake_color Colour of the lake or other water body inside continents.
#'@param shapefile A character string of the path to a .rds file or a list 
#'  object containinig shape file data. If it is a .rds file, it should contain
#'  a list. The list should contains 'x' and 'y' at least, which indicate the 
#'  location of the shape. The default value is NULL.
#'@param shapefile_color Line color of the shapefile.
#'@param shapefile_lwd Line width of the shapefile. The default value is 1. 
#'@param contours Array of same dimensions as 'var' to be added to the plot 
#'  and displayed with contours. Parameter 'brks2' is required to define the 
#'  magnitude breaks for each contour curve. Disregarded if 'square = FALSE'.
#'  It is allowed that the positions of the longitudinal and latitudinal 
#'  coordinate dimensions are interchanged.
#'@param brks2 Vector of magnitude breaks where to draw contour curves for the 
#'  array provided in 'contours' or if 'square = FALSE'.
#'@param contour_lwd Line width of the contour curves provided via 'contours' 
#'  and 'brks2', or if 'square = FALSE'.
#'@param contour_color Line color of the contour curves provided via 'contours' 
#'  and 'brks2', or if 'square = FALSE'.
#'@param contour_lty Line type of the contour curves. Takes 1 (solid) by 
#'  default. See help on 'lty' in par() for other accepted values.
#'@param contour_draw_label A logical value indicating whether to draw the 
#'  contour labels or not. The default value is TRUE.
#'@param contour_label_scale Scale factor for the superimposed labels when 
#'  drawing contour levels.
#'@param dots Array of same dimensions as 'var' or with dimensions 
#'  c(n, dim(var)), where n is the number of dot/symbol layers to add to the 
#'  plot. A value of TRUE at a grid cell will draw a dot/symbol on the 
#'  corresponding square of the plot. By default all layers provided in 'dots' 
#'  are plotted with dots, but a symbol can be specified for each of the 
#'  layers via the parameter 'dot_symbol'. It is allowed that the positions of
#'  the longitudinal and latitudinal coordinate dimensions are interchanged.
#'@param dot_symbol Single character/number or vector of characters/numbers 
#'  that correspond to each of the symbol layers specified in parameter 'dots'. 
#'  If a single value is specified, it will be applied to all the layers in 
#'  'dots'. Takes 15 (centered square) by default. See 'pch' in par() for 
#'  additional accepted options.
#'@param dot_size Scale factor for the dots/symbols to be plotted, specified 
#'  in 'dots'. If a single value is specified, it will be applied to all 
#'  layers in 'dots'. Takes 1 by default.
#'@param arr_subsamp Subsampling factor to select a subset of arrows in 
#'  'varu' and 'varv' to be drawn. Only one out of arr_subsamp arrows will 
#'  be drawn. Takes 1 by default.
#'@param arr_scale Scale factor for drawn arrows from 'varu' and 'varv'. 
#'  Takes 1 by default.
#'@param arr_ref_len Length of the refence arrow to be drawn as legend at the 
#'  bottom of the figure (in same units as 'varu' and 'varv', only affects the
#'  legend for the wind or variable in these arrays). Defaults to 15.
#'@param arr_units Units of 'varu' and 'varv', to be drawn in the legend. 
#'  Takes 'm/s' by default.
#'@param arr_scale_shaft Parameter for the scale of the shaft of the arrows 
#'  (which also depend on the number of figures and the arr_scale parameter). 
#'  Defaults to 1.
#'@param arr_scale_shaft_angle Parameter for the scale of the angle of the 
#'  shaft of the arrows (which also depend on the number of figure and the 
#'  arr_scale parameter). Defaults to 1.
#'@param axelab Whether to draw longitude and latitude axes or not. 
#'  TRUE by default.
#'@param labW Whether to label the longitude axis with a 'W' instead of minus 
#'  for negative values. Defaults to FALSE.
#'@param lab_dist_x A numeric of the distance of the longitude labels to the 
#'  box borders. The default value is NULL and is automatically adjusted by 
#'  the function.
#'@param lab_dist_y A numeric of the distance of the latitude labels to the 
#'  box borders. The default value is NULL and is automatically adjusted by 
#'  the function.
#'@param degree_sym A logical indicating whether to include degree symbol 
#'  (30° N) or not (30N; default).
#'@param intylat Interval between latitude ticks on y-axis, in degrees. 
#'  Defaults to 20.
#'@param intxlon Interval between latitude ticks on x-axis, in degrees. 
#'  Defaults to 20.
#'@param xlonshft A numeric of the degrees to shift the latitude ticks. The 
#'  default value is 0.
#'@param ylatshft A numeric of the degrees to shift the longitude ticks. The
#'  default value is 0.
#'@param xlabels A vector of character string of the custumized x-axis labels.
#'  The values should correspond to each tick, which is decided by the longitude
#'  and parameter 'intxlon'. The default value is NULL and the labels will be
#'  automatically generated.
#'@param ylabels A vector of character string of the custumized y-axis labels.
#'  The values should correspond to each tick, which is decided by the latitude
#'  and parameter 'intylat'. The default value is NULL and the labels will be
#'  automatically generated.
#'@param axes_tick_scale Scale factor for the tick lines along the longitude 
#'  and latitude axes.
#'@param axes_label_scale Scale factor for the labels along the longitude 
#'  and latitude axes.
#'@param drawleg Whether to plot a color bar (legend, key) or not. Defaults to 
#'  TRUE. It is not possible to plot the colour bar if 'add = TRUE'. Use 
#'  ColorBar() and the return values of PlotEquiMap() instead.
#'@param boxlim Limits of a box to be added to the plot, in degrees: 
#'  c(x1, y1, x2, y2). A list with multiple box specifications can also be 
#'  provided.
#'@param boxcol Colour of the box lines. A vector with a colour for each of 
#'  the boxes is also accepted. Defaults to 'purple2'.
#'@param boxlwd Line width of the box lines. A vector with a line width for 
#'  each of the boxes is also accepted. Defaults to 5.
#'@param margin_scale Scale factor for the margins around the map plot, with 
#'  the format c(y1, x1, y2, x2). Defaults to rep(1, 4). If drawleg = TRUE, 
#'  then margin_scale[1] is subtracted 1 unit.
#'@param title_scale Scale factor for the figure top title. Defaults to 1.
#'@param numbfig Number of figures in the layout the plot will be put into. 
#'  A higher numbfig will result in narrower margins and smaller labels, 
#'  axe labels, ticks, thinner lines, ... Defaults to 1.
#'@param fileout File where to save the plot. If not specified (default) a 
#'  graphics device will pop up. Extensions allowed: eps/ps, jpeg, png, pdf, 
#'  bmp and tiff.
#'@param width File width, in the units specified in the parameter size_units 
#'  (inches by default). Takes 8 by default.
#'@param height File height, in the units specified in the parameter 
#'  size_units (inches by default). Takes 5 by default.
#'@param size_units Units of the size of the device (file or window) to plot 
#'  in. Inches ('in') by default. See ?Devices and the creator function of 
#'  the corresponding device.
#'@param res Resolution of the device (file or window) to plot in. See 
#'  ?Devices and the creator function of the corresponding device.
#'@param \dots Arguments to be passed to the method. Only accepts the following 
#'  graphical parameters:\cr
#'  adj ann ask bg bty cex.sub cin col.axis col.lab col.main col.sub cra crt 
#'  csi cxy err family fg font font.axis font.lab font.main font.sub lend 
#'  lheight ljoin lmitre mex mfcol mfrow mfg mkh omd omi page pch pin plt 
#'  pty smo srt tcl usr xaxp xaxs xaxt xlog xpd yaxp yaxs yaxt ylbias ylog \cr
#'  For more information about the parameters see `par`.
#'
#'@return 
#'\item{brks}{
#'  Breaks used for colouring the map (and legend if drawleg = TRUE).
#'}
#'\item{cols}{
#'  Colours used for colouring the map (and legend if drawleg = TRUE). Always 
#'    of length length(brks) - 1.
#'}
#'\item{col_inf}{
#'  Colour used to draw the lower triangle end in the colour bar (NULL if not 
#'   drawn at all).
#' }
#'\item{col_sup}{
#'  Colour used to draw the upper triangle end in the colour bar (NULL if not 
#'   drawn at all).
#'}
#'
#'@examples
#'# See examples on Load() to understand the first lines in this example
#'  \dontrun{
aho's avatar
aho committed
#'data_path <- system.file('sample_data', package = 's2dv')
#'expA <- list(name = 'experiment', path = file.path(data_path,
#'             'model/$EXP_NAME$/$STORE_FREQ$_mean/$VAR_NAME$_3hourly',
#'             '$VAR_NAME$_$START_DATE$.nc'))
#'obsX <- list(name = 'observation', path = file.path(data_path,
#'             '$OBS_NAME$/$STORE_FREQ$_mean/$VAR_NAME$',
#'             '$VAR_NAME$_$YEAR$$MONTH$.nc'))
#'
#'# Now we are ready to use Load().
#'startDates <- c('19851101', '19901101', '19951101', '20001101', '20051101')
#'sampleData <- Load('tos', list(expA), list(obsX), startDates,
#'                   leadtimemin = 1, leadtimemax = 4, output = 'lonlat',
#'                   latmin = 27, latmax = 48, lonmin = -12, lonmax = 40)
#'  }
#'  \dontshow{
#'startDates <- c('19851101', '19901101', '19951101', '20001101', '20051101')
aho's avatar
aho committed
#'sampleData <- s2dv:::.LoadSampleData('tos', c('experiment'),
#'                                                c('observation'), startDates,
#'                                                leadtimemin = 1,
#'                                                leadtimemax = 4,
#'                                                output = 'lonlat',
#'                                                latmin = 27, latmax = 48,
#'                                                lonmin = -12, lonmax = 40)
#'  }
#'PlotEquiMap(sampleData$mod[1, 1, 1, 1, , ], sampleData$lon, sampleData$lat, 
#'            toptitle = 'Predicted sea surface temperature for Nov 1960 from 1st Nov',
#'            title_scale = 0.5)
#'@importFrom grDevices dev.cur dev.new dev.off gray
#'@importFrom stats cor
#'@export
PlotEquiMap <- function(var, lon, lat, varu = NULL, varv = NULL,
                        toptitle = NULL, sizetit = NULL, units = NULL, 
                        brks = NULL, cols = NULL, bar_limits = NULL, 
                        triangle_ends = NULL, col_inf = NULL, col_sup = NULL, 
                        colNA = NULL, color_fun = clim.palette(),
                        square = TRUE, filled.continents = NULL,
                        filled.oceans = FALSE, country.borders = FALSE,
                        coast_color = NULL, coast_width = 1, lake_color = NULL,
                        shapefile = NULL, shapefile_color = NULL, shapefile_lwd = 1,
                        contours = NULL, brks2 = NULL, contour_lwd = 0.5,
                        contour_color = 'black', contour_lty = 1,
                        contour_draw_label = TRUE, contour_label_scale = 1,
                        dots = NULL, dot_symbol = 4, dot_size = 1, 
                        arr_subsamp = floor(length(lon) / 30), arr_scale = 1, 
                        arr_ref_len = 15, arr_units = "m/s", 
                        arr_scale_shaft = 1, arr_scale_shaft_angle = 1,
                        axelab = TRUE, labW = FALSE, 
nperez's avatar
nperez committed
                        lab_dist_x = NULL, lab_dist_y = NULL, degree_sym = FALSE,
                        intylat = 20, intxlon = 20,
                        xlonshft = 0, ylatshft = 0, xlabels = NULL, ylabels = NULL,
                        axes_tick_scale = 1, axes_label_scale = 1,
                        drawleg = TRUE, subsampleg = NULL, 
                        bar_extra_labels = NULL, draw_bar_ticks = TRUE, 
                        draw_separators = FALSE, triangle_ends_scale = 1, 
                        bar_label_digits = 4, bar_label_scale = 1, 
                        units_scale = 1, bar_tick_scale = 1, 
                        bar_extra_margin = rep(0, 4),
                        boxlim = NULL, boxcol = 'purple2', boxlwd = 5, 
                        margin_scale = rep(1, 4), title_scale = 1, 
                        numbfig = NULL, fileout = NULL, 
                        width = 8, height = 5, size_units = 'in', 
  # Process the user graphical parameters that may be passed in the call
  ## Graphical parameters to exclude
  excludedArgs <- c("cex", "cex.axis", "cex.lab", "cex.main", "col", "din", "fig", "fin", "lab", "las", "lty", "lwd", "mai", "mar", "mgp", "new", "oma", "ps", "tck")
  userArgs <- .FilterUserGraphicArgs(excludedArgs, ...)

  # If there is any filenames to store the graphics, process them
  # to select the right device 
  if (!is.null(fileout)) {
    deviceInfo <- .SelectDevice(fileout = fileout, width = width, height = height, units = size_units, res = res)
    saveToFile <- deviceInfo$fun
    fileout <- deviceInfo$files
  }

  if (!is.numeric(lon) || !is.numeric(lat)) {
    stop("Parameters 'lon' and 'lat' must be numeric vectors.")
  }

  # Check var
  if (is.null(var)) {
    stop("Parameter 'var' cannot be NULL.")
  }
  if (!is.array(var)) {
    stop("Parameter 'var' must be a numeric array.")
  }
  transpose <- FALSE
  if (!is.null(names(dim(var)))) {
    if (any(names(dim(var)) %in% .KnownLonNames()) &&
        any(names(dim(var)) %in% .KnownLatNames())) {
      lon_dim <- names(dim(var))[names(dim(var)) %in% .KnownLonNames()]
      lat_dim <- names(dim(var))[names(dim(var)) %in% .KnownLatNames()]
    } else {
      names(dim(var)) <- NULL
      lat_dim <- NULL
      lon_dim <- NULL
      .warning("Dimension names of 'var' doesn't correspond to any coordinates names supported by s2dv package.")
    }
  } else {
    lon_dim <- NULL
    lat_dim <- NULL
    .warning("Parameter 'var' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the corresponding coordinates dimensions.")
  }

  if (length(dim(var)) > 2) {
    if (!is.null(lon_dim) & !is.null(lat_dim)) {
      dimnames <- names(dim(var))
      dim(var) <- dim(var)[which((dimnames == lon_dim | dimnames == lat_dim | dim(var) != 1))]
    } else {
      if (all(dim(var) == 1)) {
        dim(var) <- c(1, 1)
      } else if (length(dim(var)[which(dim(var) > 1)]) == 2) {
        var <- drop(var)
      } else if (length(dim(var)[which(dim(var) > 1)]) == 1) {
        dim(var) <- c(dim(var)[which(dim(var) > 1)], 1)
      }
    }
  }

  if (length(dim(var)) != 2) {
    stop("Parameter 'var' must be a numeric array with two dimensions.")
  }

  if ((dim(var)[1] == length(lon) && dim(var)[2] == length(lat)) ||
      (dim(var)[2] == length(lon) && dim(var)[1] == length(lat))) {
    if (dim(var)[2] == length(lon) && dim(var)[1] == length(lat)) {
      if (length(lon) == length(lat)) {
        if (is.null(names(dim(var)))) {
          .warning("Parameter 'var' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the first and second dimensions.")
        } else {
          if (names(dim(var)[1]) == lat_dim) {
            transpose <- TRUE
          }
        }
      } else {
        transpose <- TRUE
  } else {
    stop("Parameters 'lon' and 'lat' must have as many elements as the number of cells along longitudes and latitudes in the input array 'var'.")

  if (!is.null(names(dim(var)))) {
    if (names(dim(var)[1]) == lon_dim) {
      if (transpose) {
        stop("Coordinates dimensions of 'var' doesn't correspond to lat or lon.")
      }
    } else if (names(dim(var)[2]) == lon_dim) {
      if (!transpose) {
        stop("Coordinates dimensions of 'var' doesn't correspond to lat or lon.")
      }
  
  # Transpose the input matrices because the base plot functions work directly 
  # with dimensions c(lon, lat).

  if (transpose) {
    var <- t(var)
  }

  names(dim(var)) <- c(lon_dim, lat_dim)
  dims <- dim(var)

  # Check varu and varv
  if (!is.null(varu) && !is.null(varv)) {
    if (!is.array(varu) || !(length(dim(varu)) == 2)) {
      stop("Parameter 'varu' must be a numerical array with two dimensions.")
    if (!is.array(varv) || !(length(dim(varv)) == 2)) {
      stop("Parameter 'varv' must be a numerical array with two dimensions.")
  } else if (!is.null(varu) || !is.null(varv)) {
    stop("Only one of the components 'varu' or 'varv' has been provided. Both must be provided.")
  }

  if (!is.null(varu) && !is.null(varv)) {
    if (!all(dim(varu) %in% dim(varv)) || !all(names(dim(varv)) %in% names(dim(varu)))) {
      stop("Parameter 'varu' and 'varv' must have equal dimensions and dimension names.")
    } else if (any(dim(varu) != dim(varv)) || any(names(dim(varv)) != names(dim(varu)))) {
      varv <- t(varv)
      names(dim(varv)) <- names(dim(varu))
    }

    if (is.null(lon_dim)) {
      names(dim(varu)) <- NULL
      names(dim(varv)) <- NULL
    } else {
      if (!is.null(names(dim(varu)))) {
        if (!(lon_dim %in% names(dim(varu)) && lat_dim %in% names(dim(varu)))) {
          stop("Parameters 'varu' and 'varv' must have same dimension names as 'var'.")
        } else if (dim(varu)[lon_dim] != dim(var)[lon_dim] || dim(varu)[lat_dim] != dim(var)[lat_dim]) {
          stop("Parameters 'varu' and 'varv' must have same dimensions as 'var'.")
        }
      } else {
        .warning("Parameters 'varu' and 'varv' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the corresponding coordinates dimensions.")
      }
    }
    

    if ((dim(varu)[1] == dims[1] && dim(varu)[2] == dims[2]) ||
        (dim(varu)[2] ==  dims[1] && dim(varu)[1] == dims[2])) {
      if (dim(varu)[2] == dims[1] && dim(varu)[1] == dims[2]) {
        if (length(lon) == length(lat)) {
          if (is.null(names(dim(varu)))) {
            .warning("Parameters 'varu' and 'varv' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the first and second dimensions.")
          } else {
            if (names(dim(varu)[1]) == lat_dim) {
              transpose <- TRUE
            }
          }
        } else {
          transpose <- TRUE
        }   
      } 
    } else {
      stop("Parameters 'lon' and 'lat' must have as many elements as the number of cells along longitudes and latitudes in the input array 'varu' and 'varv'.")
    }
    
    if (transpose) {
      varu <- t(varu)
      varv <- t(varv)
    }

    transpose <- FALSE

  }

  # Check contours
  if (!is.null(contours)) {
    if (!is.array(contours) || !(length(dim(contours)) == 2)) {
      stop("Parameter 'contours' must be a numerical array with two dimensions.")
    }
  }


  if (!is.null(contours)) {

    if (is.null(lon_dim)) {
      names(dim(contours)) <- NULL
    } else {
      if (!is.null(names(dim(contours)))) {
        if (!(lon_dim %in% names(dim(contours)) && lat_dim %in% names(dim(contours)))) {
          stop("Parameters 'contours' must have same dimension names as 'var'.")
        } else if (dim(contours)[lon_dim] != dim(var)[lon_dim] || dim(contours)[lat_dim] != dim(var)[lat_dim]) {
          stop("Parameters 'contours' must have same dimensions as 'var'.")
        }
      } else {
        .warning("Parameters 'contours' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the corresponding coordinates dimensions.")
      }
    }


    transpose <- FALSE
    if ((dim(contours)[1] == dims[1] && dim(contours)[2] == dims[2]) ||
        (dim(contours)[2] ==  dims[1] && dim(contours)[1] == dims[2])) {
      if (dim(contours)[2] == dims[1] && dim(contours)[1] == dims[2]) {
        if (length(lon) == length(lat)) {
          if (is.null(names(dim(contours)))) {
            .warning("Parameter 'contours' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the first and second dimensions.")
          } else {
            if (names(dim(contours)[1]) == lat_dim) {
              transpose <- TRUE
            }
          }
        } else {
          transpose <- TRUE
        }   
      }
    } else {
      stop("Parameters 'lon' and 'lat' must have as many elements as the number of cells along longitudes and latitudes in the input array 'contours'.")
    }

    if (transpose) {
      contours <- t(contours)
    }

    transpose <- FALSE

  }

  # Check toptitle
  if (is.null(toptitle) || is.na(toptitle)) {
    toptitle <- ''
  }
  if (!is.character(toptitle)) {
    stop("Parameter 'toptitle' must be a character string.")
  }

  # Check sizetit
  if (!is.null(sizetit)) {
    .warning("Parameter 'sizetit' is obsolete. Use 'title_scale' instead.")
    if (!is.numeric(sizetit) || length(sizetit) != 1) {
      stop("Parameter 'sizetit' must be a single numeric value.")
    }
    title_scale <- sizetit
  }

  var_limits <- c(min(var, na.rm = TRUE), max(var, na.rm = TRUE))
  # Check: brks, cols, subsampleg, bar_limits, color_fun, bar_extra_labels, draw_bar_ticks
  #        draw_separators, triangle_ends_scale, label_scale, units, units_scale, 
  #        bar_label_digits
  # Build: brks, cols, bar_limits, col_inf, col_sup
  colorbar <- ColorBar(brks, cols, FALSE, subsampleg, bar_limits, var_limits,
                       triangle_ends, col_inf, col_sup, color_fun, FALSE, 
                       extra_labels = bar_extra_labels, draw_ticks = draw_bar_ticks,
                       draw_separators = draw_separators, 
                       triangle_ends_scale = triangle_ends_scale,
                       label_scale = bar_label_scale, title = units, 
                       title_scale = units_scale, tick_scale = bar_tick_scale,
                       extra_margin = bar_extra_margin, label_digits = bar_label_digits)
  brks <- colorbar$brks
  cols <- colorbar$cols
  col_inf <- colorbar$col_inf
  col_sup <- colorbar$col_sup
  bar_limits <- c(head(brks, 1), tail(brks, 1))

  # Check colNA
  if (is.null(colNA)) {
    if ('na_color' %in% names(attributes(cols))) {
      colNA <- attr(cols, 'na_color')
      if (!.IsColor(colNA)) {
        stop("The 'na_color' provided as attribute of the colour vector must be a valid colour identifier.")
      }
    } else {
      colNA <- 'pink'
    }
  } else if (!.IsColor(colNA)) {
    stop("Parameter 'colNA' must be a valid colour identifier.")
  }

  # Check square
  if (!is.logical(square)) {
    stop("Parameter 'square' must be logical.")
  }

  # Check filled.continents
  if (is.null(filled.continents)) {
    if (!square) {
      filled.continents <- FALSE
    } else {
      filled.continents <- TRUE
    }
  }
  if (!.IsColor(filled.continents) && !is.logical(filled.continents)) {
    stop("Parameter 'filled.continents' must be logical or a colour identifier.")
  } else if (!is.logical(filled.continents)) {
    continent_color <- filled.continents
    filled.continents <- TRUE
aho's avatar
aho committed
  } else {
    continent_color <- gray(0.5)
  }

aho's avatar
aho committed
  # Check filled.oceans
  if (!.IsColor(filled.oceans) & !is.logical(filled.oceans)) {
    stop("Parameter 'filled.oceans' must be logical or a colour identifier.")
  } else if (!is.logical(filled.oceans)) {
    ocean_color <- filled.oceans
    filled.oceans <- TRUE
  } else if (filled.oceans) {
    ocean_color <- "light blue"
  }

  # Check country.borders
  if (!is.logical(country.borders)) {
    stop("Parameter 'country.borders' must be logical.")
  }

  # Check coast_color
  if (is.null(coast_color)) {
    if (filled.continents) {
      coast_color <- continent_color
    } else {
      coast_color <- 'black'
    }
  }
  if (!.IsColor(coast_color)) {
    stop("Parameter 'coast_color' must be a valid colour identifier.")
  }

  # Check coast_width
  if (!is.numeric(coast_width)) {
    stop("Parameter 'coast_width' must be numeric.")
  }

aho's avatar
aho committed
  if (!is.null(lake_color)) {
aho's avatar
aho committed
    if (!.IsColor(lake_color)) {
      stop("Parameter 'lake_color' must be a valid colour identifier.")
  if (!is.null(shapefile)) {
    if (is.list(shapefile)) {
      shape <- shapefile
      if (any(!c('x', 'y') %in% names(shape))) {
        stop("The list names of the object in 'shapefile' .rds file should ", 
             "have at least 'x' and 'y'.")
      }
      if (length(shape$x) != length(shape$y)) {
        stop("The length of x and y in 'shapefile' list should be equal.")
      }
    } else if (!is.character(shapefile)) {
      stop("Parameter 'shapefile' must be a .rds file or a list.")
    } else {  # .rds file
      if (!file.exists(shapefile)) {
        stop("Parameter 'shapefile' is not a valid file.")
      }
      if (!grepl("\\.rds$", shapefile)) {
        stop("Parameter 'shapefile' must be a .rds file or a list.")
      }
      shape <- readRDS(file = shapefile)
      if (!is.list(shape)) {
        stop("Parameter 'shapefile' should be a .rds file of a list object.")
      }
      if (any(!c('x', 'y') %in% names(shape))) {
        stop("The list names of the object in 'shapefile' .rds file should ",
             "have at least 'x' and 'y'.")
      }
      if (length(shape$x) != length(shape$y)) {
        stop("The length of x and y in 'shapefile' list should be equal.")
      }
  # Check shapefile_col
  if (is.null(shapefile_color)) {
    if (filled.continents) {
      shapefile_color <- continent_color
    } else {
      shapefile_color <- 'black'
    }
  }
  if (!.IsColor(shapefile_color)) {
    stop("Parameter 'shapefile_color' must be a valid colour identifier.")
  }

  # Check brks2
  if (is.null(brks2)) {
    if (is.null(contours)) { 
      if (!square) {
        brks2 <- brks
        contours <- var 
      }
    } else {
      ll <- signif(min(contours, na.rm = TRUE), 2)
      ul <- signif(max(contours, na.rm = TRUE), 2)
      brks2 <- signif(seq(ll, ul, length.out = length(brks)), 2)
    }
  }

  # Check contour_lwd
  if (!is.numeric(contour_lwd)) {
    stop("Parameter 'contour_lwd' must be numeric.")
  }

  # Check contour_color
  if (!.IsColor(contour_color)) {
    stop("Parameter 'contour_color' must be a valid colour identifier.")
  }

  # Check contour_lty
  if (!is.numeric(contour_lty) && !is.character(contour_lty)) {
    stop("Parameter 'contour_lty' must be either a number or a character string.")
  }

  # Check contour_draw_label
  if (!is.logical(contour_draw_label)) {
    stop("Parameter 'contour_draw_label' must be logical.")
  }

  # Check contour_label_scale
  if (!is.numeric(contour_label_scale)) {
    stop("Parameter 'contour_label_scale' must be numeric.")
  }

  if (!is.null(dots)) {
    if (!is.array(dots) || !(length(dim(dots)) %in% c(2, 3))) {
      stop("Parameter 'dots' must be a logical array with two or three dimensions.")
    }
    if (length(dim(dots)) == 2) {
      dim(dots) <- c(1, dim(dots))
    }

    if (is.null(lon_dim)) {
      names(dim(dots)) <- NULL
    } else {
      if (!is.null(names(dim(dots)))) {
        if (!(lon_dim %in% names(dim(dots)) && lat_dim %in% names(dim(dots)))) {
          stop("Parameters 'dots' must have same dimension names as 'var'.")
        } else if (dim(dots)[lon_dim] != dim(var)[lon_dim] || dim(dots)[lat_dim] != dim(var)[lat_dim]) {
          stop("Parameters 'dots' must have same dimensions as 'var'.")
        }
      } else {
        .warning("Parameters 'dots' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the corresponding coordinates dimensions.")
      }
    }

    transpose <- FALSE
    if ((dim(dots)[2] == dims[1] && dim(dots)[3] == dims[2]) ||
        (dim(dots)[3] ==  dims[1] && dim(dots)[2] == dims[2])) {
      if (dim(dots)[3] == dims[1] && dim(dots)[2] == dims[2]) {
        if (length(lon) == length(lat)) {
          if (is.null(names(dim(dots)))) {
            .warning("Parameter 'dots' should have dimension names. Coordinates 'lon' and 'lat' have been assigned into the first and second dimensions.")
          } else {
            if (names(dim(dots)[2]) == lat_dim) {
              transpose <- TRUE
            }
          }
        } else {
          transpose <- TRUE
        }
      }
    } else {
      stop("Parameter 'dots' must have same number of longitudes and latitudes as 'var'.")
    }

    if (transpose) {
  }

  # Check dot_symbol and dot_size
  if (!is.null(dots)) {
    if (!is.numeric(dot_symbol) && !is.character(dot_symbol)) {
      stop("Parameter 'dot_symbol' must be a numeric or character string vector.")
    }
    if (length(dot_symbol) == 1) {
      dot_symbol <- rep(dot_symbol, dim(dots)[1])
    } else if (length(dot_symbol) < dim(dots)[1]) {
      stop("Parameter 'dot_symbol' does not contain enough symbols.")
    }
    if (!is.numeric(dot_size)) {
      stop("Parameter 'dot_size' must be numeric.")
    }
    if (length(dot_size) == 1) {
      dot_size <- rep(dot_size, dim(dots)[1])
    } else if (length(dot_size) < dim(dots)[1]) {
      stop("Parameter 'dot_size' does not contain enough sizes.")
    }
  }

  # Check arrow parameters
  if (!is.numeric(arr_subsamp)) {
    stop("Parameter 'arr_subsamp' must be numeric.")
  }
  if (!is.numeric(arr_scale)) {
    stop("Parameter 'arr_scale' must be numeric.")
  }
  if (!is.numeric(arr_ref_len)) {
    stop("Parameter 'arr_ref_len' must be numeric.")
  }
  if (!is.character(arr_units)) {
    stop("Parameter 'arr_units' must be character.")
  }
  if (!is.numeric(arr_scale_shaft)) {
    stop("Parameter 'arr_scale_shaft' must be numeric.")
  }
  if (!is.numeric(arr_scale_shaft_angle)) {
    stop("Parameter 'arr_scale_shaft_angle' must be numeric.")
  }

  # Check axis parameters
  if (!is.logical(axelab)) {
    stop("Parameter 'axelab' must be logical.")
  }
  if (!is.logical(labW)) {
    stop("Parameter 'labW' must be logical.")
  }
  if (!is.null(lab_dist_x)) {
    if (!is.numeric(lab_dist_x)) {
      stop("Parameter 'lab_dist_x' must be numeric.")
    }
  }
  if (!is.null(lab_dist_y)) {
    if (!is.numeric(lab_dist_y)) {
      stop("Parameter 'lab_dist_y' must be numeric.")
    }
  }
  if (!is.numeric(intylat)) {
    stop("Parameter 'intylat' must be numeric.")
  } else {
    intylat <- round(intylat)
  }
  if (!is.numeric(intxlon)) {
    stop("Parameter 'intxlon' must be numeric.")
  } else {
    intxlon <- round(intxlon)
  }
  if (!is.numeric(xlonshft) | length(xlonshft) != 1) {
    stop("Parameter 'xlonshft' must be a number.")
  }
  if (!is.numeric(ylatshft) | length(ylatshft) != 1) {
    stop("Parameter 'ylatshft' must be a number.")
  }
  if (!is.null(xlabels)) {
    if (!is.character(xlabels) | !is.vector(xlabels)) {
      stop("Parameter 'xlabels' must be a vector of character string.")
    }
  }
  if (!is.null(ylabels)) {
    if (!is.character(ylabels) | !is.vector(ylabels)) {
      stop("Parameter 'ylabels' must be a vector of character string.")
    }

  # Check legend parameters
  if (!is.logical(drawleg)) {
    stop("Parameter 'drawleg' must be logical.")
  }

  # Check box parameters
  if (!is.null(boxlim)) {
    if (!is.list(boxlim)) {
      boxlim <- list(boxlim)
    }
    for (i in 1:length(boxlim)) {
      if (!is.numeric(boxlim[[i]]) || length(boxlim[[i]]) != 4) {
        stop("Parameter 'boxlim' must be a a numeric vector or a list of numeric vectors of length 4 (with W, S, E, N box limits).")
      }
    }
    if (!is.character(boxcol)) {
      stop("Parameter 'boxcol' must be a character string or a vector of character strings.")
    } else {
      if (length(boxlim) != length(boxcol)) {
        if (length(boxcol) == 1) {
          boxcol <- rep(boxcol, length(boxlim))
        } else {
          stop("Parameter 'boxcol' must have a colour for each box in 'boxlim' or a single colour for all boxes.")
        }
      }
    }
    if (!is.numeric(boxlwd)) {
      stop("Parameter 'boxlwd' must be numeric.")
    } else {
      if (length(boxlim) != length(boxlwd)) {
        if (length(boxlwd) == 1) {
          boxlwd <- rep(boxlwd, length(boxlim))
        } else {
          stop("Parameter 'boxlwd' must have a line width for each box in 'boxlim' or a single line width for all boxes.")
        }
      }
    }
  }

  # Check margin_scale
  if (!is.numeric(margin_scale) || length(margin_scale) != 4) {
    stop("Parameter 'margin_scale' must be a numeric vector of length 4.")
  }

  # Check title_scale
  if (!is.numeric(title_scale)) {
    stop("Parameter 'title_scale' must be numeric.")
  }

  # Check axes_tick_scale
  if (!is.numeric(axes_tick_scale)) {
    stop("Parameter 'axes_tick_scale' must be numeric.")
  }

  # Check axes_label_scale
  if (!is.numeric(axes_label_scale)) {
    stop("Parameter 'axes_label_scale' must be numeric.")
  }

  # Check numbfig
  if (!is.null(numbfig)) {
    if (!is.numeric(numbfig)) {
      stop("Parameter 'numbfig' must be numeric.")
    } else {
      numbfig <- round(numbfig)
      scale <- 1 / numbfig ** 0.3
      axes_tick_scale <- axes_tick_scale * scale
      axes_label_scale <- axes_label_scale * scale
      title_scale <- title_scale * scale
      margin_scale <- margin_scale * scale
      arr_scale <- arr_scale * scale
      dot_size <- dot_size * scale
      contour_label_scale <- contour_label_scale * scale
      contour_lwd <- contour_lwd * scale
    }
  }

  #
  #  Input arguments 
  # ~~~~~~~~~~~~~~~~~
  #
  latb <- sort(lat, index.return = TRUE)
  dlon <- diff(lon)
  wher <- which(dlon > (mean(dlon) + 1))
  if (length(wher) > 0) {
aho's avatar
aho committed
    .warning("Detect gap in 'lon' vector, which is considered as crossing the border.")
    lon[(wher + 1):dims[1]] <- lon[(wher + 1):dims[1]] - 360
  }
  lonb <- sort(lon, index.return = TRUE)
  latmin <- floor(min(lat) / 10) * 10
  latmax <- ceiling(max(lat) / 10) * 10
  lonmin <- floor(min(lon) / 10) * 10
  lonmax <- ceiling(max(lon) / 10) * 10

  #
  #  Plotting the map
  # ~~~~~~~~~~~~~~~~~~
  #

  # Open connection to graphical device
  if (!is.null(fileout)) {
    saveToFile(fileout)
  } else if (names(dev.cur()) == 'null device') {
    dev.new(units = size_units, res = res, width = width, height = height)
  }

  #
  #  Defining the layout
  # ~~~~~~~~~~~~~~~~~~~~~
  # 
  if (drawleg) {
    margin_scale[1] <- margin_scale[1] - 1
  }
  margins <- rep(0.4, 4) * margin_scale
  margins[4] <- margins[4] + 1
  cex_title <- 2 * title_scale
  cex_axes_labels <- 1.3 * axes_label_scale
  cex_axes_ticks <- -0.5 * axes_tick_scale
  spaceticklab <- 0
  if (axelab) { 
    # Y axis label
    if (!is.null(ylabels)) {
      ypos <- seq(latmin, latmax, intylat) + ylatshft
      if (length(ypos) != length(ylabels)) {
        stop(paste0("Parameter 'ylabels' must have the same length as the latitude ",
                    "vector spaced by 'intylat' (length = ", length(ypos), ")."))
nperez's avatar
nperez committed
    } else {
      ypos <- seq(latmin, latmax, intylat) + ylatshft
      letters <- array('', length(ypos))
      if (degree_sym == FALSE) {
        letters[ypos < 0] <- 'S'
        letters[ypos > 0] <- 'N'
      } else {
        letters[ypos < 0] <- paste(intToUtf8(176), 'S')
        letters[ypos > 0] <- paste(intToUtf8(176), 'N')
      }
      ylabs <- paste(as.character(abs(ypos)), letters, sep = '')
    if (!is.null(xlabels)) {
      xpos <- seq(lonmin, lonmax, intxlon) + xlonshft
      if (length(xpos) != length(xlabels)) {
        stop(paste0("Parameter 'xlabels' must have the same length as the longitude ",
                    "vector spaced by 'intxlon' (length = ", length(xpos), ")."))
nperez's avatar
nperez committed
    } else {
      xpos <- seq(lonmin, lonmax, intxlon) + xlonshft
      letters <- array('', length(xpos))
      if (labW) {
        xpos2 <- xpos