Newer
Older
This file describes changes in recent versions of SLURM. It primarily
documents those changes that are of interest to users and admins.
Danny Auble
committed
-- Fixed issue with sacctmgr if quering against non-existant cluster it
works the same way as 2.1.
-- Added infrastructure to support allocation of generic node resources (gres).
-Modified select/linear and select/cons_res plugins to allocate resources
at the level of a job without oversubcription.
-Get sched/backfill operating with gres allocations.
-Get gres configuration changes (reconfiguration) working.
-Have job steps allocate resources.
-Modified job step credential to include the job's and step's gres
allocation details.
-Integrate with HWLOC library to identify GPUs and NICs configured on each
node.
-- SLURM commands (squeue, sinfo, etc...) can now go cross-cluster on like
linux systems. Cross-cluster for bluegene to linux and such should
-- Added the ability to configure PreemptMode on a per-partition basis.
-- Change slurmctld's default thread limit count to 1024, but adjust that down
as needed based upon the processs's resource limits.
-- Removed the non-functional "SystemCPU" and "TotalCPU" reporting fields from
sstat and updated man page
-- Correct location of apbasil command on Cray XT systems.
-- Fixed bug in MinCPU and AveCPU calculations in sstat command
-- Send message to srun when the Prolog takes too long (MessageTimeout) to
complete.
-- Change timeout for socket connect() to be half of configured MessageTimeout.
-- Added high-throughput computing web page with configuration guidance.
-- Use more srun sockets to process incoming PMI (MPICH2) connections for
better scalability.
-- Added DebugFlags for the select/bluegene plugin: DEBUG_FLAG_BG_PICK,
DEBUG_FLAG_BG_WIRES, DEBUG_FLAG_BG_ALGO, and DEBUG_FLAG_BG_ALGO_DEEP.
-- Remove vestigial job record field "kill_on_step_done" (internal to the
slurmctld daemon only).
-- For MPICH2 jobs: Clear PMI state between job steps.
* Changes in SLURM 2.2.0.pre6
=============================
-- sview - added ability to see database configuration.
-- sview - added ability to add/remove visible tabs.
-- sview - change way grid highlighting takes place on selected objects.
-- Added infrastructure to support allocation of generic node resources.
-Added node configuration parameter of Gres=.
-Added ability to view/modify a node's gres using scontrol, sinfo and sview.
-Added salloc, sbatch and srun --gres option.
-Added ability to view a job or job step's gres using scontrol, squeue and
sview.
-Added new configuration parameter GresPlugins to define plugins used to
manage generic resources.
-Added DebugFlags option of "gres" for detailed debugging of gres actions.
-- Slurmd modified to log slow slurmstepd startup and note possible file system
problem.
-- sview - There is now a .slurm/sviewrc created when running sview.
Danny Auble
committed
Defaults are put in there as to how sview looks when first launched.
You can set these by Ctrl-S or Options->Set Default Settings.
-- Add scontrol "wait_job <job_id>" option to wait for nodes to boot as needed.
Moe Jette
committed
Useful for batch jobs (in Prolog, PrologSlurmctld or the script) if powering
down idle nodes.
-- Added salloc and sbatch option --wait-for-nodes. If set non-zero, job
initiation will be delayed until all allocated nodes have booted. Salloc
will log the delay with the messages "Waiting for nodes to boot" and "Nodes
are ready for use".
Danny Auble
committed
-- The Priority/mulitfactor plugin now takes into consideration size of job
in cpus as well as size in nodes when looking at the job size factor.
Previously only nodes were considered.
Danny Auble
committed
-- When using the SlurmDBD messages waiting to be sent will be combined
and sent in one message.
-- Remove srun's --core option. Move the logic to an optional SPANK plugin
(currently in the contribs directory, but plan to distribute through
http://code.google.com/p/slurm-spank-plugins/).
Danny Auble
committed
-- Patch for adding CR_CORE_DEFAULT_DIST_BLOCK as a select option to layout
jobs using block layout across cores within each node instead of cyclic
which was previously the default.
Danny Auble
committed
-- Accounting - When removing associations if jobs are running, those jobs
must be killed before proceeding. Before the jobs were killed
automatically thus causing user confusion on what is most likely an
admin's mistake.
-- sview - color column keeps reference color when highlighting.
-- Configuration parameter MaxJobCount changed from 16-bit to 32-bit field.
The default MaxJobCount was changed from 5,000 to 10,000.
Danny Auble
committed
-- SLURM commands (squeue, sinfo, etc...) can now go cross-cluster on like
linux systems. Cross-cluster for bluegene to linux and such does not
currently work. You can submit jobs with sbatch. Salloc and srun are not
cross-cluster compatible, and given their nature to talk to actual compute
Danny Auble
committed
nodes these will likely never be.
-- salloc modified to forward SIGTERM to the spawned program.
-- In sched/wiki2 (for Moab support) - Add GRES and WCKEY fields to MODIFYJOBS
and GETJOBS commands. Add GRES field to GETNODES command.
-- In struct job_descriptor and struct job_info: rename min_sockets to
sockets_per_node, min_cores to cores_per_socket, and min_threads to
threads_per_core (the values are not minimum, but represent the target
values).
-- Fixed bug in clearing a partition's DisableRootJobs value reported by
Hongjia Cao.
-- Purge (or ignore) terminated jobs in a more timely fashion based upon the
MinJobAge configuration parameter. Small values for MinJobAge should improve
responsiveness for high job throughput.
* Changes in SLURM 2.2.0.pre5
=============================
-- Modify commands to accept time format with one or two digit hour value
-- Modify time parsing logic to accept "minute", "hour", "day", and "week" in
addition to the currently accepted "minutes", "hours", etc.
-- Add slurmd option of "-C" to print actual hardware configuration and exit.
-- Pass EnforcePartLimits configuration parameter from slurmctld for user
commands to see the correct value instead of always "NO".
-- Modify partition data structures to replace the default_part,
disable_root_jobs, hidden and root_only fields with a single field called
"flags" populated with the flags PART_FLAG_DEFAULT, PART_FLAG_NO_ROOT
PART_FLAG_HIDDEN and/or PART_FLAG_ROOT_ONLY. This is a more flexible
solution besides making for smaller data structures.
-- Add node state flag of JOB_RESIZING. This will only exist when a job's
accounting record is being written immediately before or after it changes
size. This permits job accounting records to be written for a job at each
size.
-- Make calls to jobcomp and accounting_storage plugins before and after a job
changes size (with the job state being JOB_RESIZING). All plugins write a
record for the job at each size with intermediate job states being
-- When changing a job size using scontrol, generate a script that can be
executed by the user to reset SLURM environment variables.
-- Modify select/linear and select/cons_res to use resources released by job
resizing.
-- Added to contribs foundation for Perl extension for slurmdb library.
-- Add new configuration parameter JobSubmitPlugins which provides a mechanism
to set default job parameters or perform other site-configurable actions at
job submit time.
-- Better postgres support for accounting, still beta.
-- Speed up job start when using the slurmdbd.
Danny Auble
committed
-- Forward step failure reason back to slurmd before in some cases it would
just be SLURM_FAILURE returned.
-- Changed squeue to fail when passed invalid -o <output_format> or
-S <sort_list> specifications.
* Changes in SLURM 2.2.0.pre4
=============================
-- Add support for a PropagatePrioProcess configuration parameter value of 2
to restrict spawned task nice values to that of the slurmd daemon plus 1.
This insures that the slurmd daemon always have a higher scheduling
priority than spawned tasks.
-- Add support in slurmctld, slurmd and slurmdbd for option of "-n <value>" to
-- Fixed slurm_load_slurmd_status and slurm_pid2jobid to work correctly when
multiple slurmds are in use.
Danny Auble
committed
-- Altered srun to set max_nodes to min_nodes if not set when doing an
allocation to mimic that which salloc and sbatch do. If running a step if
the max isn't set it remains unset.
-- Applied patch from David Egolf (David.Egolf@Bull.com). Added the ability
to purge/archive accounting data on a day or hour basis, previously
it was only available on a monthly basis.
Moe Jette
committed
-- Add support for maximum node count in job step request.
-- Fix bug in CPU count logic for job step allocation (used count of CPUS per
node rather than CPUs allocated to the job).
-- Add new configuration parameters GroupUpdateForce and GroupUpdateTime.
See "man slurm.conf" for details about how these control when slurmctld
updates its information of which users are in the groups allowed to use
partitions.
Danny Auble
committed
-- Added sacctmgr list events which will list events that have happened on
clusters in accounting.
-- Permit a running job to shrink in size using a command of
"scontrol update JobId=# NumNodes=#" or
"scontrol update JobId=# NodeList=<names>". Subsequent job steps must
explicitly specify an appropriate node count to work properly.
-- Added resize_time field to job record noting the time of the latest job
size change (to be used for accounting purposes).
Danny Auble
committed
-- sview/smap now hides hidden partitions and their jobs by default, with an
option to display them.
* Changes in SLURM 2.2.0.pre3
=============================
-- Refine support for TotalView partial attach. Add parameter to configure
program of "--enable-partial-attach".
-- In select/cons_res, the count of CPUs on required nodes was formerly
ignored in enforcing the maximum CPU limit. Also enforce maximum CPU
limit when the topology/tree plugin is configured (previously ignored).
-- In select/cons_res, allocate cores for a job using a best-fit approach.
-- In select/cons_res, for jobs that can run on a single node, use a best-fit
packing approach.
-- Add support for new partition states of DRAIN and INACTIVE and new partition
option of "Alternate" (alternate partition to use for jobs submitted to
partitions that are currently in a state of DRAIN or INACTIVE).
-- Add group membership cache. This can substantially speed up slurmctld
startup or reconfiguration if many partitions have AllowGroups configured.
-- Added slurmdb api for accessing slurm DB information.
-- In select/linear: Modify data structures for better performance and to
avoid underflow error messages when slurmctld restarts while jobs are
in completing state.
-- Added hash for slurm.conf so when nodes check in to the controller it can
verify the slurm.conf is the same as the one it is running. If not an
error message is displayed. To silence this message add NO_CONF_HASH
to DebugFlags in your slurm.conf.
-- Added error code ESLURM_CIRCULAR_DEPENDENCY and prevent circular job
dependencies (e.g. job 12 dependent upon job 11 AND job 11 is dependent
upon job 12).
-- Add BootTime and SlurmdStartTime to available node information.
-- Fixed moab_2_slurmdb to work correctly under new database schema.
-- Slurmd will drain a compute node when the SlurmdSpoolDir is full.
* Changes in SLURM 2.2.0.pre2
=============================
-- Add support for spank_get_item() to get S_STEP_ALLOC_CORES and
S_STEP_ALLOC_MEM. Support will remain for S_JOB_ALLOC_CORES and
S_JOB_ALLOC_MEM.
-- Kill individual job steps that exceed their memory limit rather than
killing an entire job if one step exceeds its memory limit.
-- Added configuration parameter VSizeFactor to enforce virtual memory limits
for jobs and job steps as a percentage of their real memory allocation.
-- Add scontrol ability to update job step's time limits.
-- Add scontrol ability to update job's NumCPUs count.
-- Add --time-min options to salloc, sbatch and srun. The scontrol command
has been modified to display and modify the new field. sched/backfill
plugin has been changed to alter time limits of jobs with the
--time-min option if doing so permits earlier job initiation.
-- Add support for TotalView symbol MPIR_partial_attach_ok with srun support
to release processes which TotalView does not attach to.
-- Add new option for SelectTypeParameters of CR_ONE_TASK_PER_CORE. This
option will allocate one task per core by default. Without this option,
by default one task will be allocated per thread on nodes with more than
one ThreadsPerCore configured.
-- Avoid accounting separately for a current pid corresponds to a Light Weight
Process (Thread POSIX) appearing in the /proc directory. Only account for
the original process (pid==tgid) to avoid accounting for memory use more
than once.
-- Add proctrack/cgroup plugin which uses Linux control groups (aka cgroup)
to track processes on Linux systems having this feature enabled (kernel
>= 2.6.24).
-- Add logging of license transations including job_id.
-- Add configuration parameters SlurmSchedLogFile and SlurmSchedLogLevel to
support writing scheduling events to a separate log file.
-- Added contribs/web_apps/chart_stats.cgi, a web app that invokes sreport to
retrieve from the accounting storage db a user's request for job usage or
machine utilization statistics and charts the results to a browser.
Danny Auble
committed
-- Massive change to the schema in the storage_accounting/mysql plugin. When
starting the slurmdbd the process of conversion may take a few minutes.
You might also see some errors such as 'error: mysql_query failed: 1206
The total number of locks exceeds the lock table size'. If you get this,
do not worry, it is because your setting of innodb_buffer_pool_size in
your my.cnf file is not set or set too low. A decent value there should
be 64M or higher depending on the system you are running on. See
RELEASE_NOTES for more information. But setting this and then
restarting the mysqld and slurmdbd will put things right. After this
change we have noticed 50-75% increase in performance with sreport and
sacct.
Danny Auble
committed
-- Fix for MaxCPUs to honor partitions of 1 node that have more than the
maxcpus for a job.
-- Add support for "scontrol notify <message>" to work for batch jobs.
-- Added SLURM_VERSION_NUMBER and removed SLURM_API_VERSION from
slurm/slurm.h.
Danny Auble
committed
-- Added support to handle communication with SLURM 2.1 clusters. Job's
should not be lost in the future when upgrading to higher versions of
SLURM.
-- Added withdeleted options for listing clusters, users, and accounts
-- Remove PLPA task affinity functions due to that package being deprecated.
-- Preserve current partition state information and node Feature and Weight
information rather than use contents of slurm.conf file after slurmctld
restart with -R option or SIGHUP. Replace information with contents of
slurm.conf after slurmctld restart without -R or "scontrol reconfigure".
See RELEASE_NOTES file fore more details.
-- Modify SLURM's PMI library (for MPICH2) to properly execute an executable
program stand-alone (single MPI task launched without srun).
-- Made GrpCPUs and MaxCPUs limits work for select/cons_res.
Danny Auble
committed
-- Moved all SQL dependant plugins into a seperate rpm slurm-sql. This
should be needed only where a connection to a database is needed (i.e.
where the slurmdbd is running)
-- Add command line option "no_sys_info" to PAM module to supress system
logging of "access granted for user ...", access denied and other errors
will still be logged.
Danny Auble
committed
-- sinfo -R now has the user and timestamp in separate fields from the reason.
-- Much functionality has been added to account_storage/pgsql. The plugin
is still in a very beta state. It is still highly advised to use the
mysql plugin, but if you feel like living on the edge or just really
like postgres over mysql for some reason here you go. (Work done
primarily by Hongjia Cao, NUDT.)
* Changes in SLURM 2.1.9
========================
-- In select/linear - Fix logic to prevent over-subscribing memory with shared
nodes (Shared=YES or Shared=FORCE).
-- Fix for handling -N and --ntasks-per-node without specifying -n with
salloc and sbatch.
-- Fix jobacct_gather/linux if not polling on tasks to give tasks time to
start before doing initial gather.
-- When changing priority with the multifactor plugin we make sure we update
the last_job_update variable.
-- Fixed sview for gtk < 2.10 to display correct debug level at first.
-- Fixed sview to not select too fast when using a mouse right click.
-- Fixed sacct to display correct timelimits for jobs from accounting.
-- Fixed sacct when running as root by default query all users as documented.
-- In proctrack/linuxproc, skip over files in /proc that are not really user
processes (e.g. "/proc/bus").
-- Fix documentation bug for slurmdbd.conf
-- Fix slurmctld to update qos preempt list without restart.
-- Fix bug in select/cons_res that in some cases would prevent a preempting job
from using of resources already allocated to a preemptable running job.
-- Fix for sreport in interactive mode to honor parsable/2 options.
-- Fixed minor bugs in sacct and sstat commands
-- BLUEGENE - Fixed issue if the slurmd becomes unresponsive and you have
blocks in an error state accounting is correct when the slurmd comes
back up.
-- Corrected documentation for -n option in srun/salloc/sbatch
-- BLUEGENE - when running a willrun test along with preemption the bluegene
plugin now does the correct thing.
-- Fix possible memory corruption issue which can cause slurmctld to abort.
-- BLUEGENE - fixed small memory leak when setting up env.
-- Fixed deadlock if using accounting and cluster changes size in the
database. This can happen if you mistakenly have multiple primary
slurmctld's running for a single cluster, which should rarely if ever
happen.
-- Fixed sacct -c option.
-- Critical bug fix in sched/backfill plugin that caused in memory corruption.
* Changes in SLURM 2.1.8
========================
-- Update BUILD_NOTES for AIX and bgp systems on how to get sview to
build correctly.
-- Update man page for scontrol when nodes are in the "MIXED" state.
-- Better error messages for sacctmgr.
-- Fix bug in allocation of CPUs with select/cons_res and --cpus-per-task
option.
-- Fix bug in dependency support for afterok and afternotok options to insure
that the job's exit status gets checked for dependent jobs prior to puring
completed job records.
-- Fix bug in sched/backfill that could set an incorrect expected start time
for a job.
-- BLUEGENE - Fix for systems that have midplanes defined in the database
that don't exist.
-- Accounting, fixed bug where if removing an object a rollback wasn't
possible.
-- Fix possible scontrol stack corruption when listing jobs with very a long
job or working directory name (over 511 characters).
-- Insure that SPANK environment variables set by salloc or sbatch get
propagated to the Prolog on all nodes by setting SLURM_SPANK_* environment
variables for srun's use.
-- In sched/wiki2 - Add support for the MODIFYJOB command to alter a job's
comment field
-- When a cluster first registers with the SlurmDBD only send nodes in an
non-usable state. Before all nodes were sent.
-- Alter sacct to be able to query jobs by association id.
-- Edit documentation for scontrol stating ExitCode as something not alterable.
-- Update documentation about ReturnToService and silently rebooting nodes.
-- When combining --ntasks-per-node and --exclusive in an allocation request
the correct thing, giving the allocation the entire node but only
ntasks-per-node, happens.
-- Fix accounting transaction logs when deleting associations to put the
ids instead of the lfts which could change over time.
-- Fix support for salloc, sbatch and srun's --hint option to avoid allocating
a job more sockets per node or more cores per socket than desired. Also
when --hint=compute_bound or --hint=memory_bound then avoid allocating more
than one task per hyperthread (a change in behavior, but almost certainly
a preferable mode of operation).
* Changes in SLURM 2.1.7
========================
-- Modify srun, salloc and sbatch parsing for the --signal option to accept
either a signal name in addition to the previously supported signal
numbers (e.g. "--signal=USR2@200").
-- BLUEGENE - Fixed sinfo --long --Node output for cpus on a single cnode.
-- In sched/wiki2 - Fix another logic bug in support of Moab being able to
identify preemptable jobs.
-- In sched/wiki2 - For BlueGene systems only: Fix bug preventing Moab from
being able to correctly change the node count of pending jobs.
-- In select/cons_res - Fix bug preventing job preemption with a configuration
of Shared=FORCE:1 and PreemptMode=GANG,SUSPEND.
-- In the TaskProlog, add support for an "unset" option to clear environment
variables for the user application. Also add support for embedded white-
space in the environment variables exported to the user application
(everything after the equal sign to the end of the line is included without
alteration).
-- Do not install /etc/init.d/slurm or /etc/init.d/slurmdbd on AIX systems.
-- BLUEGENE - fixed check for small blocks if a node card of a midplane is
in an error state other jobs can still run on the midplane on other
nodecards.
-- BLUEGENE - Check to make sure job killing is in the active job table in
DB2 when killing the job.
-- Correct logic to support ResvOverRun configuration parameter.
-- Get --acctg-freq option working for srun and salloc commands.
-- Fix sinfo display of drained nodes correctly with the summarize flag.
-- Fix minor memory leaks in slurmd and slurmstepd.
-- Better error messages for failed step launch.
-- Modify srun to insure compatability of the --relative option with the node
count requested.
* Changes in SLURM 2.1.6-2
==========================
-- In sched/wiki2 - Fix logic in support of Moab being able to identify
preemptable jobs.
-- Applied fixes to a debug4 message in priority_multifactor.c sent in by
Per Lundqvist
-- BLUEGENE - Fixed issue where incorrect nodecards could be picked when
looking at combining small blocks to make a larger small block.
* Changes in SLURM 2.1.6
========================
-- For newly submitted jobs, report expected start time in squeue --start as
"N/A" rather than current time.
-- Correct sched/backfill logic so that it runs in a more timely fashion.
-- Fixed issue if running on accounting cache and priority/multifactor to
initialize the root association when the database comes back up.
Moe Jette
committed
-- Emulated BLUEGENE - fixed issue where blocks weren't always created
correctly when loading from state. This does not apply to a real
bluegene system, only emulated.
-- Fixed bug when job is completing and its cpu_cnt would be calculated
incorrectly, possibly resulting in an underflow being logged.
-- Fixed bug where if there are pending jobs in a partition which was
updated to have no nodes in it the slurmctld would dump core.
-- Fixed smap and sview to display partitions with no nodes in them.
-- Improve configure script's logic to detect LUA libraries.
-- Fix bug that could cause slurmctld to abort if select/cons_res is used AND a
job is submitted using the --no-kill option AND one of the job's nodes goes
DOWN AND slurmctld restarts while that job is still running.
-- In jobcomp plugins, job time limit was sometimes recorded improperly if not
set by user (recorded huge number rather than partition's time limit).
* Changes in SLURM 2.1.5
========================
-- BLUEGENE - Fixed display of draining nodes for sinfo -R.
-- Fixes to scontrol and sview when setting a job to an impossible start time.
-- Added -h to srun for help.
-- Fix for sacctmgr man page to remove erroneous 'with' statements.
-- Fix for unpacking jobs with accounting statistics, previously it appears
only steps were unpacked correctly, for the most case sacct would only
display this information making this fix a very minor one.
-- Changed scontrol and sview output for jobs with unknown end times from
'NONE' to 'Unknown'.
-- Fixed mysql plugin to reset classification when adding a
previously deleted cluster.
-- Permit a batch script to reset umask and have that propagate to tasks
spawed by subsequent srun. Previously the umask in effect when sbatch was
executed was propagated to tasks spawed by srun.
-- Modify slurm_job_cpus_allocated_on_node_id() and
slurm_job_cpus_allocated_on_node() functions to not write explanation of
failures to stderr. Only return -1 and set errno.
-- Correction in configurator.html script. Prolog and Epilog were reversed.
-- BLUEGENE - Fixed race condition where if a nodecard has an error on an
un-booted block when a job comes to use it before the state checking
thread notices it which could cause the slurmctld to lock up on a
non-dynamic system.
-- In select/cons_res with FastSchedule=0 and Procs=# defined for the node,
but no specific socket/core/thread count configured, avoid fatal error if
the number of cores on a node is less than the number of Procs configured.
-- Added ability for the perlapi to utilize opaque data types returned from
the C api.
-- BLUEGENE - made the perlapi get correct values for cpus per node,
Previously it would give the number of cpus per cnode instead of midplane.
-- BLEUGENE - Fixed issue where if a block being selected for a job to use
and during the process a hardware failure happens, previously the block
would still be allowed to be used which would fail or requeue the job
depending on the configuration.
-- For SPANK job environment, avoid duplicate "SPANK_" prefix for environment
set by sbatch jobs.
-- Make squeue select jobs on hidden partitions when requesting more than one.
-- Avoid automatically cancelling job steps when all of the tasks on some node
have gracefully terminated.
* Changes in SLURM 2.1.4
========================
-- Fix for purge script in accounting to use correct options.
-- If SelectType=select/linear and SelectTypeParameters=CR_Memory fix bug that
would fail to release memory reserved for a job if "scontrol reconfigure"
is executed while the job is in completing state.
-- Fix bug in handling event trigger for job time limit while job is still
in pending state.
-- Fixed display of Ave/MaxCPU in sacct for jobs. Steps were printed
correctly.
-- When node current features differs from slurm.conf, log the node names
using a hostlist expression rather than listing individual node names.
-- Improve ability of srun to abort job step for some task launch failures.
-- Fix mvapich plugin logic to release the created job allocation on
initialization failure (previously the failures would cancel job step,
but retain job allocation).
-- Fix bug in srun for task count so large that it overflows int data type.
-- Fix important bug in select/cons_res handling of ntasks-per-core parameter
that was uncovered by a bug fixed in v2.1.3. Bug produced fatal error for
slurmctld: "cons_res: cpus computation error".
-- Fix bug in select/cons_res handling of partitions configured with
Shared=YES. Prior logic failed to support running multiple jobs per node.
* Changes in SLURM 2.1.3-2
==========================
-- Modified spec file to obsolete pam_slurm when installing
the slurm-pam_slurm rpm.
* Changes in SLURM 2.1.3-1
==========================
-- BLUEGENE - Fix issues on static/overlap systems where if a midplane
was drained you would not be able to create new blocks on it.
-- In sched/wiki2 (for Moab): Add excluded host list to job information
using new keyword "EXCLUDE_HOSTLIST".
-- Correct slurmd reporting of incorrect socket/core/thread counts.
-- For sched/wiki2 (Moab): Do not extend a job's end time for suspend/resume
or startup delay due to node boot time. A job's end time will always be
its start time plus time limit.
-- Added build-time option (to configure program) of --with-pam_dir to
specify the directory into which PAM modules get installed, although it
should pick the proper directory by default. "make install" and "rpmbuild"
should now put the pam_slurm.so file in the proper directory.
-- Modify PAM module to link against SLURM API shared library and use exported
slurm_hostlist functions.
-- Do not block new jobs with --immediate option while another job is in the
process of being requeued (which can take a long time for some node failure
modes).
-- For topology/tree, log invalid hostnames in a single hostlist expression
rather than one per line.
-- A job step's default time limit will be UNLIMITED rather than partition's
default time limit. The step will automatically be cancelled as part of the
job termination logic when the job's time limit is reached.
-- sacct - fixed bug when checking jobs against a reservation
-- In select/cons_res, fix support for job allocation with --ntasks_per_node
option. Previously could allocate too few CPUs on some nodes.
-- Adjustment made to init message to the slurmdbd to allow backwards
compatibility with future 2.2 release. YOU NEED TO UPGRADE SLURMDBD
BEFORE ANYTHING ELSE.
-- Fix accounting when comment of down/drained node has double quotes in it.
* Changes in SLURM 2.1.2
========================
-- Added nodelist to sview for jobs on non-bluegene systems
-- Correction in value of batch job environment variable SLURM_TASKS_PER_NODE
under some conditions.
-- When a node silently fails which is already drained/down the reason
for draining for the node is not changed.
-- Srun will ignore SLURM_NNODES environment variable and use the count of
currently allocated nodes if that count changes during the job's lifetime
(e.g. job allocation uses the --no-kill option and a node goes DOWN, job
step would previously always fail).
-- Made it so sacctmgr can't add blank user or account. The MySQL plugin
will also reject such requests.
-- Revert libpmi.so version for compatibility with SLURM version 2.0 and
earlier to avoid forcing applications using a specific libpmi.so version to
rebuild unnecessarily (revert from libpmi.so.21.0.0 to libpmi.so.0.0.0).
-- Restore support for a pending job's constraints (required node features)
when slurmctld is restarted (internal structure needed to be rebuilt).
-- Removed checkpoint_blcr.so from the plugin rpm in the slurm.spec since
it is also in the blcr rpm.
-- Fixed issue in sview where you were unable to edit the count
of jobs to share resources.
-- BLUEGENE - Fixed issue where tasks on steps weren't being displayed
correctly with scontrol and sview.
-- BLUEGENE - fixed wiki2 plugin to report correct task count for pending
jobs.
-- BLUEGENE - Added /etc/ld.so.conf.d/slurm.conf to point to the
directory holding libsched_if64.so when building rpms.
-- Adjust get_wckeys call in slurmdbd to allow operators to list wckeys.
========================
Danny Auble
committed
-- Fix for case sensitive databases when a slurmctld has a mixed case
clustername to lower case the string to easy compares.
Danny Auble
committed
-- Fix squeue if job is completing and failed to print remaining
nodes instead of failed message.
-- Fix sview core when searching for partitions by state.
Danny Auble
committed
-- Fixed setting the start time when querying in sacct to the
beginning of the day if not set previously.
-- Defined slurm_free_reservation_info_msg and slurm_free_topo_info_msg
in common/slurm_protocol_defs.h
-- Avoid generating error when a job step includes a memory specification and
memory is not configured as a consumable resource.
-- Patch for small memory leak in src/common/plugstack.c
-- Fix bug in which improperly formed job dependency specification can cause
slurmctld to abort.
-- Fixed issue where slurmctld wouldn't always get a message to send cluster
information when registering for the first time with the slurmdbd.
-- Add slurm_*_trigger.3 man pages for event trigger APIs.
-- Fix bug in job preemption logic that would free allocated memory twice.
-- Fix spelling issues (from Gennaro Oliva)
-- Fix issue when changing parents of an account in accounting all childern
weren't always sent to their respected slurmctlds until a restart.
-- Restore support for srun/salloc/sbatch option --hint=nomultithread to
bind tasks to cores rather than threads (broken in slurm v2.1.0-pre5).
-- Fix issue where a 2.0 sacct could not talk correctly to a 2.1 slurmdbd.
-- BLUEGENE - Fix issue where no partitions have any nodes assigned them to
alert user no blocks can be created.
-- BLUEGENE - Fix smap to put BGP images when using -Dc on a Blue Gene/P
system.
-- Set SLURM_SUBMIT_DIR environment variable for srun and salloc commands to
match behavior of sbatch command.
-- Report WorkDir from "scontrol show job" command for jobs launched using
salloc and srun.
-- Update correctly the wckey when changing it on a pending job.
-- Set wckeyid correctly in accounting when cancelling a pending job.
-- BLUEGENE - critical fix where jobs would be killed incorrectly.
-- BLUEGENE - fix for sview putting multiple ionodes on to nodelists when
viewing the jobs tab.
========================
-- Improve sview layout of blocks in use.
-- A user can now change the dimensions of the grid in sview.
-- BLUEGENE - improved startup speed further for large numbers of defined
blocks
-- Fix to _get_job_min_nodes() in wiki2/get_jobs.c suggested by Michal Novotny
-- BLUEGENE - fixed issues when updating a pending job when a node
count was incorrect for the asked for connection type.
Danny Auble
committed
-- BLUEGENE - fixed issue when combining blocks that are in ready states to
make a larger block from those or make multiple smaller blocks by
splitting the larger block. Previously this would only work with block
in a free state.
Danny Auble
committed
-- Fix bug in wiki(2) plugins where if HostFormat=2 and the task list is
greater than 64 we don't truncate. Previously this would mess up Moab
by sending a truncated task list when doing a get jobs.
-- Added update slurmctld debug level to sview when in admin mode.
-- Added logic to make sure if enforcing a memory limit when using the
jobacct_gather plugin a user can no longer turn off the logic to enforce
the limit.
-- Replaced many calls to getpwuid() with reentrant uid_to_string()
Danny Auble
committed
-- The slurmstepd will now refresh it's log file handle on a reconfig,
previously if a log was rolled any output from the stepd was lost.
* Changes in SLURM 2.1.0-pre9
=============================
-- Added the "scontrol update SlurmctldDebug" as the preferred alternative to
the "scontrol setdebug" command.
Danny Auble
committed
-- BLUEGENE - made it so when removing a block in an error state the nodes in
the block are set correctly in accounting as not in error.
Danny Auble
committed
-- Fixed issue where if slurmdbd is not up qos' are set up correctly for
-- scontrol, squeue, sview all display the correct node, cpu count along with
correct corresponding nodelist on completing jobs.
-- Patch (Mark Grondona) fixes serious security vulnerability in SLURM in
the spank_job_env functionality.
-- Improve spank_job_env interface and documentation
-- Add ESPANK_NOT_LOCAL error code to spank_err_t
-- Made the #define DECAY_INTERVAL used in the priority/multifactor plugin
a slurm.conf variable (PriorityCalcPeriod)
Danny Auble
committed
-- Added new macro SLURM_VERSION for use in autoconf scripts to determine
current version of slurm installed on system when building against the api.
-- Patch from Matthieu Hautreux that adds an entry into the error file when
a job or step receives a TERM or KILL signal.
Danny Auble
committed
-- Make it so env var SLURM_SRUN_COMM_HOST is overwritten if already in
* Changes in SLURM 2.1.0-pre8
=============================
-- Rearranged the "scontrol show job" output into functional groupings
-- Change the salloc/sbatch/srun -P option to -d (dependency)
-- Removed the srun -d option; must use srun --slurmd-debug instead
-- When running the mysql plugin natively MUNGE errors are now eliminated
when sending updates to slurmctlds.
-- Check to make sure we have a default account before looking to
fill in default association.
-- Accounting - Slurmctld and slurmdbd will now set uids of users which were
created after the start of the daemons on reconfig. Slurmdbd will
attempt to set previously non-existant uids every hour.
Danny Auble
committed
-- Patch from Aaron Knister and Mark Grondona, to parse correctly quoted
#SBATCH options in a batch script.
-- job_desc_msg_t - in, out, err have been changed to std_in, std_out,
and std_err respectfully. Needed for PySLURM, since Python sees (in)
as a keyword.
-- Changed the type of addr to struct sockaddr_in in _message_socket_accept()
Danny Auble
committed
in sattach.c, step_launch.c, and allocate_msg.c, and moved the function
into a common place for all the calls since the code was very similar.
-- proctrack/lua support has been added see contribs/lua/protrack.lua
-- replaced local gtk m4 test with AM_PATH_GTK_2_0
-- changed AC_CHECK_LIB to AC_SEARCH_LIBS to avoid extra libs in
compile lines.
-- Patch from Matthieu Hautreux to improve error message in slurmd/req.c
-- Added support for split groups from (Matthiu Hautreux CEA)
-- Patch from Mark Grondona to move blcr scripts into pkglibexecdir
-- Patch from Doug Parisek to calculate a job's projected start time under the
builtin scheduler.
-- Removed most global variables out of src/common/jobacct_common.h
* Changes in SLURM 2.1.0-pre7
=============================
Danny Auble
committed
-- BLUEGENE - make 2.1 run correctly on a real bluegene cluster
-- sacctmgr - Display better debug for when an admin specifies a non-existant
Danny Auble
committed
parent account when changing parent accounts.
-- Added a mechanism to the slurmd to defer the epilog from starting until
after a running prolog has finished.
-- If a node reboots inbetween checking status the node is marked down unless
ReturnToService=2
Danny Auble
committed
-- Added -R option to slurmctld to recover partition state also when
restarting or reconfiguring.
* Changes in SLURM 2.1.0-pre6
=============================
-- When getting information about nodes in hidden partitions, return a node
name of NULL rather than returning no information about the node so that
node index information is still valid.
-- When querying database for jobs in certain state and a time period is
Danny Auble
committed
given only jobs in that state during the period will be returned,
previously if a time period was given in sacct jobs eligible to run or
running would be displayed, which is still the default if no states are
requested.
-- One can now query jobs based on size (nodes and or cpus) (mysql plugin only)
Don Lipari
committed
-- Applied patch from Mark Grondona that tests for a missing config file before
any other processing in spank_init(). This now prevents fatal errors from
being mistakenly treated as recoverable.
-- --enable-debug no longer has to be stated at configure time to have
the slurmctld or slurmstepd dump core on a seg fault.
-- Moved the errant slurm_job_node_ready() declaration from job_info.h to
slurm.h and deleted job_info.h.
slurm_job_cpus_allocated_on_node() API for working with the
job_resources_t structure.
Danny Auble
committed
-- BLUEGENE - speed up start up for systems that have many blocks (100+)
configured on the system.
Danny Auble
committed
* Changes in SLURM 2.1.0-pre5
=============================
-- Add squeue option "--start" to report expected start time of pending jobs.
-- Sched/backfill plugin modified to set expected start time of pending jobs.
-- Add SchedulerParameters option of "max_job_bf=#" to control how far down
the queue of pending jobs that SLURM searches in an attempt backfill
schedule them. The default value is 50 jobs.
-- Fixed cause of squeue -o "%C" seg fault.
-- Add -"-signal=<int>@<time>" option to salloc, sbatch and srun commands to
notify programs before reaching the end of their time limit.
-- Add scontrol option to update a running job's EndTime (also resets the
job's time limit).
-- Add new job wait reason, ReqNodeNotAvail: Required node is not available
(down or drained).
-- Log when slurmctld or slurmd are started with small core file limit.
-- Permit job's owner to change features, processor count, minimum and
maximun node counts of pending jobs (the operation was previously
restricted to user root)
-- Applied patch from Chuck Clouston for scontrol man page with clarifications
and additional info
-- Change slurm errno name from ESLURM_TOO_MANY_REQUESTED_NODES to
ESLURM_INVALID_NODE_COUNT to better reflect its meaning.
-- Fix bug in sched/backfill which could result in invalid memory reference
when trying to schedule jobs submitted with --exclude option.
-- Fix for slurmctld deadlock at startup with PreemptMode=SUSPEND,GANG.
-- Completely disable logging of sched/wiki and sched/wiki2 (Maui & Moab)
message traffic unless DebugFlag=Wiki is configured.
-- Change scontrol show job info: ReqProcs (number of processors requested)
is replaced by NumProcs (number of processors requested or actually
allocated) and ReqNodes (number of nodes requested) is replaced by
NumNodes (number of nodes requested or actually allocated).
Danny Auble
committed
-- Fixed issue when max nodes wasn't specified and was later set by limit
to not request that as the actual maximum.
-- Move job preemption (for requeue, checkpoint and kill modes only) out of
gang scheduling module. Make identification of preemptable jobs an argument
to the select_g_job_test function rather than calling preempt plugin from
the select plugin. Make output of srun --test-only option include a list
of preempted job IDs.
-- Better record keeping for front end systems when registering.
-- Enable memory allocation logic for jobs step (i.e. allocate resources
within the job's memory allocation and enforce limits).
-- sview and "scontrol show config" now report as SLURM_VERSION the version
of slurmctld rather than that of the command.
-- Change SuspendTime configuration parameter from 16-bits to 32-bits.
-- Add environment variable support to sattach, salloc, sbatch and srun
to permit user control over exit codes so application exit codes can be
distiguished from those generated by SLURM. SLURM_EXIT_ERROR specifies the
exit code when a SLURM error occurs. SLURM_EXIT_IMMEDIATE specifies the
exit code when the --immediate option is specified and resources are not
available. Any other non-zero exit code would be that of the application
run by SLURM.
-- Added a Quality of Service (QOS) html page.
-- In sched/wiki2, JOBWILLRUN command, add support for identification of
preemptable and preempted jobs (both new and old format of commands are
supported).
-- Remove contribs/python/hostlist files. Download the materials as needed
directly from http://www.nsc.liu.se/~kent/python-hostlist.
-- BLUEGENE - Preemption now works on bluegene systems
-- For salloc, sbatch and srun commands, ignore _maximum_ values for
--sockets-per-node, --cores-per-socket and --threads-per-core options.
Remove --mincores, --minsockets, --minthreads options (map them to
minimum values of -sockets-per-node, --cores-per-socket and
--threads-per-core for now).
Danny Auble
committed
Moe Jette
committed
* Changes in SLURM 2.1.0-pre4
=============================
-- Move processing of node configuration information in slurm.conf and
topology information in topology.conf from slurmctld into common and load
that information into slurmd. Use it to set environment variables for jobs
SLURM_TOPOLOGY_ADDR and SLURM_TOPOLOGY_ADDR_PATTERN describing the network
topology for each task. Based upon patch from Mattheu Hautreux (CEA).
-- Correction in computing a job's TotalProcs value when ThreadsPerCore>1 and
allocating by cores or sockets.
Moe Jette
committed
* Changes in SLURM 2.1.0-pre3
=============================
-- Removed sched/gang plugin and moved the logic directly into the slurmctld
daemon so that job preemption and gang scheduling can be used with the
sched/backfill plugin. Added configuration parameter:
PreemptMode=gang|off|suspend|cancel|requeue|checkpoint
to enable/disable gang scheduling and job preemption logic (both are
disabled by default).
(NOTE: There are some problems with memory management which could prevent a
job from starting when memory would be freed by a job being requeued or
otherwise removed, these are being worked on)
-- Added PreemptType configuration parameter to identify preemptable jobs.
Former users of SchedType=sched/gang should set SchedType=sched/backfill,
PreemptType=preempt/partition_prio and PreemptMode=gang,suspend. See
web and slurm.conf man page for other options.
Moe Jette
committed
PreemptType=preempt/qos uses Quality Of Service information in database.
-- In select/linear, optimize job placement across partitions.
-- If the --partition option is used with the sinfo or squeue command then
print information about even hidden partitions.
-- Replaced misc cpu allocation members in job_info_t with select_job_res_t
which will only be populated when requested (show_flags & SHOW_DETAIL)
-- Added a --detail option to "scontrol show job" to display the cpu/mem
allocation info on a node-by-node basis.
Danny Auble
committed
-- Added logic to give correct request uid for individual steps that
were cancelled.
-- Created a spank_get_item() option (S_JOB_ALLOC_MEM) that conveys the memory
that the select/cons_res plugin has allocated to a job.
-- BLUEGENE - blocks in error state are now handled correctly in accounting.
-- Modify squeue to print job step information about a specific job ID using
the following syntax: "squeue -j <job_id> -s".
-- BLUEGENE - scontrol delete block and update block can now remove blocks
on dynamic laid out systems.
-- BLUEGENE - Vastly improve Dynamic layout mode algorithm.
-- Address some issues for SLURM support of Solaris.
Danny Auble
committed
-- Applied patch from Doug Parisek (Doug.Parisek@bull.com) for speeding up
start of sview by delaying to creation of tooltips until requested.
-- Changed GtkToolTips to GtkToolTip for newer versions of GTK.
-- Applied patch from Rod Schultz (Rod.Schultz@Bull.com) that eliminates
ambiguity in the documentation over use of the terms "CPU" and "socket".
-- Modified get_resource_arg_range() to return full min/max values when input
string is null. This fixes the srun -B option to function as documented.
-- If the job, node, partition, reservation or trigger state file is missing
or too small, automatically try using the previously saved state (file
name with ".old" suffix).
-- Set a node's power_up/configuring state flag while PrologSlurmctld is
running for a job allocated to that node.
-- If PrologSlurmctld has a non-zero exit code, requeue the job or kill it.
-- Added sacct ability to use --format NAME%LENGTH similar to sacctmgr.
-- Improve hostlist logic for multidimensional systems.
-- The pam_slurm Pluggable Authentication Module for SLURM previously
distributed separately has been moved within the main SLURM distribution
and is packaged as a separate RPM.
-- Added configuration parameter MaxTasksPerNode.
-- Remove configuration parameter SrunIOTimeout.
-- Added functionality for sacctmgr show problems. Current problems include
Accounts/Users with no associations, Accounts with no users or subaccounts
attached in a cluster, and Users with No UID on the system.
-- Added new option for sacctmgr list assoc and list cluster WOLimits. This
gives a smaller default format without the limit information. This may
be the new default for list assocations and list clusters.
-- Users are now required to have an association with there default account.
Sacctmgr will now complain when you try to modify a users default account
which they are not associated anywhere.
-- Fix select/linear bug resulting in run_job_cnt underflow message if a
suspended job is cancelled.
-- Add test for fsync() error for state save files. Log and retry as needed.
-- Log fatal errors from slurmd and slurmctld to syslog.
-- Added error detection and cleanup for the case in which a compute node is
rebooted and restarts its slurmd before its "down" state is noticed.
-- BLUEGENE systems only - remove vestigal start location from jobinfo.
-- Add reservation flag of "OVERLAP" to permit a new reservation to use
nodes already in another reservation.
-- Fix so "scontrol update jobid=# nice=0" can clear previous nice value.
-- BLUEGENE - env vars such as SLURM_NNODES, SLURM_JOB_NUM_NODES, and
SLURM_JOB_CPUS_PER_NODE now reference cnode counts instead of midplane
counts. SLURM_NODELIST still references midplane names.
-- Added qos support to salloc/sbatch/srun/squeue
-- Added to scancel the ability to select jobs by account and qos
-- Recycled the "-A" argument indicate "account" for all the commands that
accept the --account argument (srun -A to allocate is no longer supported.)
-- Change sbatch response from "sbatch: Submitted batch job #" written to
stderr to "Submitted batch job #" written to stdout.
-- Made shutdown and cleanup a little safer for the mvapich and mpich1_p4
plugins.
-- QOS support added with limits, priority and preemption
(no documentation yet).
-- If a slurmd does not have a node listed in it's slurm.conf (slurm.conf's
should be kept the same on all nodes) an error message is printed in the
slurmctld log along with the message already being printed in the slurmd
log for easier debugging.
* Changes in SLURM 2.1.0-pre2
=============================
-- Added support for smap to query off node name for display.
-- Slurmdbd modified to set user ID and group ID to SlurmUser if started as
user root.
-- Configuration parameter ControlMachine changed to accept multiple comma-
separated hostnames for support of some high-availability architectures.
Danny Auble
committed
-- ALTERED API CALL slurm_get_job_steps 0 has been changed to NO_VAL for both
job and step id to recieve all jobs/steps. Please make adjustments to
your code.
-- salloc's --wait=<secs> option deprecated by --immediate=<secs> option to
match the srun command.
-- Add new slurmctld list for node features with node bitmaps for simplified
scheduling logic.
Moe Jette
committed
-- Multiple features can be specified when creating a reservation. Use "&"
(AND) or "|" (OR) separators between the feature names.
-- Changed internal node name caching so that front-end mode would work with
multiple lines of node name definitions.
-- Add node state flag for power-up/configuring. Represented by "#" suffix
on the node state name (e.g. "ALLOCATED#") for command output.
-- Add CONFIGURING/CF job state flag for node power-up/configuring.
-- Modify job step cancel logic for scancel and srun (on reciept of SIGTERM
or three SIGINT) to immediately send SIGKILL to spawned tasks. Previous
logic would send SIGCONT, SIGTERM, wait KillWait seconds, SIGKILL.
-- Created a spank_get_item() option (S_JOB_ALLOC_CORES) that conveys the cpus
that the select/cons_res plugin has allocated to a job.
-- Improve sview performance (outrageously) on very large machines.
-- Add support for licenses in resource reservation.
-- BLUEGENE - Jobs waiting for a block to boot will now be in Configuring
state.
-- bit_fmt now does not return brackets surrounding any set of data.
* Changes in SLURM 2.1.0-pre1
=============================
-- Slurmd notifies slurmctld of node boot time to better clean up after node
reboots.
-- Slurmd sends node registration information repeatedly until successful
transmit.
-- Change job_state in job structure to dedicate 8-bits to state flags.
Added macros to get state information (IS_JOB_RUNNING(job_ptr), etc.)
-- Added macros to get node state information (IS_NODE_DOWN(node_ptr), etc).
-- Added support for Solaris. Patch from David Hoppner.
-- Rename "slurm-aix-federation-<version>.rpm" to just
"slurm-aix-<version>.rpm" (federation switch plugin may not be present).
Moe Jette
committed
-- Eliminated the redundant squeue output format and sort options of
"%o" and "%b". Use "%D" and "%S" formats respectively. Also eliminated
Moe Jette
committed
"%X" and "%Y" and "%Z" formats. Use "%z" instead.
-- Added mechanism for SPANK plugins to set environment variables for
Prolog, Epilog, PrologSLurmctld and EpilogSlurmctld programs using
the functions spank_get_job_env, spank_set_job_env, and
spank_unset_job_env. See "man spank" for more information.
-- Completed the work to begun in 2.0.0 to standardize on using '-Q' as the
--quiet flag for all the commands.
Danny Auble
committed
-- BLUEGENE - sinfo and sview now display correct cpu counts for partitions
-- Cleaned up the cons_res plugin. It now uses a ptr to a part_record
instead of having to do strcmp's to find the correct one.
-- Pushed most all the plugin specific info in src/common/node_select.c
into the respected plugin.
-- BLUEGENE - closed some corner cases where a block could had been removed
while a job was waiting for it to become ready because an underlying
part of the block was put into an error state.
-- Modify sbcast logic to prevent a user from moving files to nodes they
have not been allocated (this would be possible in previous versions
only by hacking the sbcast code).
-- Add contribs/sjstat script (Perl tool to report job state information).
Put into new RPM: sjstat.
-- Add sched/wiki2 (Moab) JOBMODIFY command support for VARIABLELIST option
to set supplemental environment variables for pending batch jobs.
-- BLUEGENE - add support for scontrol show blocks.
-- Added support for job step time limits.
* Changes in SLURM 2.0.10
=========================
* Changes in SLURM 2.0.9
========================
-- When running the mysql plugin natively MUNGE errors are now eliminated
when sending updates to slurmctlds.
-- Check to make sure we have a default account before looking to
fill in default association.
-- Fix to make it so sched/wiki2 can modify a job's partition or hostlist of
non-pending jobs.
-- Applied slurmctld prolog bug fix from Dennis Leepow to backfill.c
-- fixed quite a few typos (needed for debian packages)
-- make it so slurmctld will core dump without --enable-debug set
-- Fix issue when doing a rollup on reservations before a cluster has been
added.
-- MySQL plugin - When doing archiving end time is now decreased by 1
which should be more correct.
-- BLUEGENE - Fixed issue where --no-rotate didn't work correctly on job
submissions.
-- BLUEGENE - made the buffer longer when submitting jobs to get the entire
line. Previously the line could be shortened prematurely.
-- BLUEGENE - Fix to make sure we don't erroneously set a connection type
to SMALL.
-- Type cast a negative uint64_t to int64_t to avoid confusion when doing
arithmetic with it in accounting dealing with over commit time.
* Changes in SLURM 2.0.8
========================
-- BLUEGENE - added dub2 of stderr to put error messages sent from underlying
libraries of the bridge api to the bridgeapi.log
-- Fixed issue with sacctmgr when modifing a user and specifying 'where'
after giving the user name also.
-- -L, --allclusters now works with sacct
-- Modified job table to use 32bit u/gids for those with ids greater
than 16 bits.
-- Made minor changes for slurm to compile cleanly under gcc 4.4.1
-- Fixed issue with task/affinity when an allocation would run multiple sruns
with the --exclusive flag in an allocation with more than 1 node.
Previously when the first node was filled up no tasks would ever run
on the other nodes.
-- Fixed sview and sacct to display correct run time and suspend time when
job has been suspended.
-- Applied patch from Mark Grondona that fixes the validation of the
PluginDir to support the colon separated list of directories as documented.
-- BLUEGENE - squeue -o %R now prints more readable info for small blocks
-- sacct - fixed garbage being printed out on uninitialized variable.
-- Fix for mysql plugin when used without slurmdbd to register the
slurmctld properly.
-- Fix for mysql plugin putting correct hostnames in for running steps.
* Changes in SLURM 2.0.7
========================
-- Fix bug in select/cons_res when nodes are configured in more than one