Newer
Older
This file describes changes in recent versions of SLURM. It primarily
documents those changes that are of interest to users and admins.
* Changes in SLURM 1.3.0-pre8
=============================
-- Modify how strings are packed in the RPCs, Maximum string size
increased from 64KB (16-bit size field) to 4GB (32-bit size field).
-- Fix bug that prevented time value of "INFINITE" from being processed.
-- Added new srun/sbatch option "--open-mode" to control how output/error
files are opened ("t" for truncate, "a" for append).
-- Added checkpoint/xlch plugin for use with XLCH (Hongjia Cao, NUDT).
-- Added srun option --checkpoint-path for use with XLCH (Hongjia Cao, NUDT).
-- Added new srun/salloc/sbatch option "--acctg-freq" for user control over
accounting data collection polling interval.
-- In sched/wiki2 add support for hostlist expression use in GETNODES command
with HostFormat=2 in the wiki.conf file.
-- Added new scontrol option "setdebug" that can change the slurmctld daemons
debug level at any time (Hongjia Cao, NUDT).
* Changes in SLURM 1.3.0-pre7
=============================
-- Fix a bug in the processing of srun's --exclusive option for a job step.
* Changes in SLURM 1.3.0-pre6
=============================
-- Add support for configurable number of jobs to share resources using the
partition Shared parameter in slurm.conf (e.g. "Shared=FORCE:3" for two
jobs to share the resources). From Chris Holmes, HP.
-- Made salloc use api instead of local code for message handling.
* Changes in SLURM 1.3.0-pre5
=============================
-- Add select_g_reconfigure() function to node changes in slurmctld configuration
that can impact node scheduling.
-- scontrol to set/get partition's MaxTime and job's Timelimit in minutes plus
new formats: min:sec, hr:min:sec, days-hr:min:sec, days-hr, etc.
-- scontrol "notify" command added to send message to stdout of srun for
specified job id.
Moe Jette
committed
-- For BlueGene, make alpha part of node location specification be case insensitive.
-- Report scheduler-plugin specific configuration information with the
"scontrol show configuration" command on the SCHEDULER_CONF line. This
information is not found in the "slurm.conf" file, but a scheduler plugin
specific configuration (e.g. "wiki.conf").
-- sview partition information reported now includes partition priority.
-- Expand job dependency specification to support concurrent execution,
testing of job exit status and multiple job IDs.
* Changes in SLURM 1.3.0-pre4
=============================
-- Job step launch in srun is now done from the slurm api's all further
modifications to job launch should be done there.
-- Add new partition configuration parameter Priority. Add job count to
Shared parameter.
-- Add new configuration parameters DefMemPerTask, MaxMemPerTask, and
SchedulerTimeSlice.
-- In sched/wiki2, return REJMESSAGE with details on why a job was
requeued (e.g. what node failed).
* Changes in SLURM 1.3.0-pre3
=============================
-- Added srun option "--checkpoint=time" for job step to automatically be
checkpointed on a period basis.
-- Change behavior of "scancel -s KILL <jobid>" to send SIGKILL to all job
steps rather than cancelling the job. This now matches the behavior of
all other signals. "scancel <jobid>" still cancels the job and all steps.
-- Add support for new job step options --exclusive and --immediate. Permit
job steps to be queued when resources are not available within an existing
job allocation to dedicate the resources to the job step. Useful for
executing simultaneous job steps. Provides resource management both at
the level of jobs and job steps.
srun --nodes=16 --constraint=graphics*4 ...
Based upon work by Kumar Krishna (HP, India).
-- Add multi-core options to salloc and sbatch commands (sbatch.patch and
cleanup.patch from Chris Holmes, HP).
-- In select/cons_res properly release resources allocated to job being
suspended (rmbreak.patch, from Chris Holmes, HP).
-- Removed database and jobacct plugin replaced with jobacct_storage
and jobacct_gather for easier hooks for further expansion of the
jobacct plugin.
* Changes in SLURM 1.3.0-pre2
=============================
-- Added new srun option --pty to start job with pseudo terminal attached
to task 0 (all other tasks have I/O discarded)
-- Disable user specifying jobid when sched/wiki2 configured (needed for
Moab releases until early 2007).
-- Report command, args and working directory for batch jobs with
"scontrol show job".
* Changes in SLURM 1.3.0-pre1
=============================
Christopher J. Morrone
committed
-- !!! SRUN CHANGES !!!
The srun options -A/--allocate, -b/--batch, and -a/--attach have been
removed! That functionality is now available in the separate commands
salloc, sbatch, and sattach, respectively.
-- Add new node state FAILING plus trigger for when node enters that state.
-- Add new configuration paramter "PrivateData". This can be used to
prevent a user from seeing jobs or job steps belonging to other users.
-- Added configuration parameters for node power save mode: ResumeProgram
ResumeRate, SuspendExcNodes, SuspendExcParts, SuspendProgram and
SuspendRate.
-- Slurmctld maintains the IP address (rather than hostname) for srun
communications. This fixes some possible network routing issues.
-- Added global database plugin. Job accounting and Job completion are the
first to use it. Follow documentation to add more to the plugin.
-- Removed no-longer-needed jobacct/common/common_slurmctld.c since that is
replaced by the database plugin.
-- Added new configuration parameter: CryptoType.
Moved existing digital signature logic into new plugin: crypto/openssl.
Added new support for crypto/munge (available with GPL license).
* Changes in SLURM 1.2.21
=========================
-- Fixed torque wrappers to look in the correct spot for the perl api
-- Do not treat user resetting his time limit to the current value as
an error.
-- Set correct executable names for Totalview when --multi-prog option
is used and more than one node is allocated to the job step.
-- When a batch job gets requeued, record in accounting logs that
the job was cancelled, the requeued job's submit time will be
set to the time of its requeue so it looks like a different job.
-- Prevent communication problems if the slurmd/slurmstepd have a
different JobAcct plugin configured than slurmctld.
-- Adding Gold plugin for job accounting
-- In sched/wiki2, add support for MODIFYJOB option "JOBNAME=<name>"
to modify a job's name.
-- Add configuration check for sys/syslog.h and include it as needed.
* Changes in SLURM 1.2.20
=========================
-- In switch/federation, fix small memory leak effecting slurmd.
-- Add PMI_FANOUT_OFF_HOST environment variable to control how message
forwarding is done for PMI (MPICH2). See "man srun" for details.
-- From sbatch set SLURM_NTASKS_PER_NODE when --ntasks-per-node option is
specified.
-- BLUEGENE: Documented the prefix should always be lower case and the 3
digit suffix should be uppercase if any letters are used as digits.
-- In sched/wiki and sched/wiki2, add support for --cpus-per-task option.
From Miguel Ros, BSC.
-- In sched/wiki2, prevent invalid memory pointer (and likely seg fault)
for job associated with a partition that has since been deleted.
-- In sched/wiki2 plus select/cons_res, prevent invalid memory pointer
(and likely seg fault) when a job is requeued.
-- In sched/wiki, add support for job suspend, resume, and modify.
-- In sched/wiki, add suppport for processor allocation (not just node allocation)
with layout control.
-- Prevent re-sending job termination RPC to a node that has already completed
the job. Only send it to specific nodes which have not reported completion.
-- Support larger environment variables 64K instead of BUFSIZ (8k on some
systems).
-- If a job is being requeued, job step create requests will print a
warning and repeatedly retry rather than aborting.
-- Add optional mode value to srun and sbatch --get-user-env option.
-- Print error message and retry job submit commands when MaxJobCount
is reached. From Don Albert, Bull.
-- Treat invalid begin time specification as a fatal error in sbatch and
srun. From Don Albert, Bull.
-- Validate begin time specification to avoid hours >24, minutes >59, etc.
* Changes in SLURM 1.2.19
=========================
*** NOTE IMPORTANT CHANGE IN RPM BUILD BELOW ****
-- slurm.spec file (used to build RPMs) was updated in order to support Mock, a
chroot build environment. See https://hosted.fedoraproject.org/projects/mock/
for more information. The following RPMs are no longer build by default:
aix-federation, auth_none, authd, bluegene, sgijob, and switch-elan. Change
the RPMs built using the following options in ~/rpmmacros: "%_with_authd 1",
"%_without_munge 1", etc. See the slurm.spec file for more details.
-- Print warning if non-privileged user requests negative "--nice" value on
job submission (srun, salloc, and sbatch commands).
-- In sched/wiki and sched/wiki2, add support for srun's --ntasks-per-node
option.
-- In select/bluegene with Groups defined for Images, fix possible memory
corruption. Other configurations are not affected.
-- BLUEGENE - Fix bug that prevented user specification of linux-image,
mloader-image, and ramdisk-image on job submission.
-- BLUEGENE - filter Groups specified for image not just by submitting
user's current group, but all groups the user has access to.
-- BLUEGENE - Add salloc options to specify images to be loaded (--blrts-image,
--linux-image, --mloader-image, and --ramdisk-image).
-- BLUEGENE - In bluegene.conf, permit Groups to be comma separated in addition
to colon separators previously supported.
-- sbatch will accept batch script containing "#SLURM" options and advise
changed to "#SBATCH".
-- If srun --output or --error specification contains a task number rather
than a file name, send stdout/err from specified task to srun's stdout/err
rather than to a file by the same name as the task's number.
-- For srun --multi-prog option, verify configuration file before attempting
to launch tasks, report clear explanation of any configuration file errors.
-- For sched/wiki2, add optional timeout option to srun's --get-user-env
parameter, change default timeout for "su - <user> env" from 3 to 8 seconds.
On timeout, attempt to load env from file at StateSaveLocation/env_cache/<user>.
The format of this file is the same as output of "env" command. If there
is no env cache file, then abort the request.
-- squeue modified for completing job to remove nodes that have already
completed the job before applying node filter logic.
-- squeue formatted output option added for job comment, "%q" (the obvious
choices for letters are already in use).
-- Added configure option --enable-load-env-no-login for use with Moab. If
set then the user job runs with the environment built without a login
("su <user> env" rather than "su - <user> env").
-- Fix output of "srun -o %C" (allocated CPU count) for running jobs. This was
broken in 1.2.18 for handling requeue of Moab jobs.
-- Added logic to mpiexec wrapper to read in the MPIEXEC_TIMEOUT var
-- Updated qstat wrapper to display information for partitions (-Q) option
-- NOTE: SLURM should now work directly with Globus using the PBS GRAM.
* Changes in SLURM 1.2.18
=========================
-- BLUEGENE - bug fix for smap stating passthroughs are used when they aren't
-- Fixed bug in sview to be able to edit partitions correctly
-- Fixed bug so in slurm.conf files where SlurmdPort isn't defined things
work correctly.
-- In sched/wiki2 and sched/wiki add support for batch job being requeued
in Slurm either when nodes fail or upon request.
-- In sched/wiki2 and sched/wiki with FastSchedule=2 configured and nodes
configured with more CPUs than actually exist, return a value of TASKS
equal to the number of configured CPUs that are allocated to a job rather
than the number of physical CPUs allocated.
-- For sched/wiki2, timeout "srun --get-user-env ..." command after 3 seconds
if unable to perform pseudo-login and get user environment variables.
-- Add contribs/time_login.c program to test how long pseudo-login takes
for specific users or all users. This can identify users for which Moab
job submissions are unable to set the proper environment variables.
-- Fix problem in parallel make of Slurm.
-- Fixed bug in consumable resources when CR_Core_Memory is enabled
-- Add delay in slurmctld for "scontrol shutdown" RPC to get propagated
to slurmd daemons.
* Changes in SLURM 1.2.17
=========================
-- In select/cons_res properly release resources allocated to job being
suspended (rmbreak.patch, from Chris Holmes, HP).
-- Fix AIX linking problem for PMI (mpich2) support.
-- Improve PMI logic for greater scalability (up to 16k tasks run).
-- Add srun support for SLURM_THREADS and PMI_FANOUT environment variables.
-- Fix support in squeue for output format with left justification of
reason (%r) and reason/node_list (%R) output.
-- Automatically requeue a batch job when a node allocated to it fails
or the prolog fails (unless --no-requeue or --no-kill option used).
-- In sched/wiki, enable use of wiki.conf parameter ExcludePartitions to
directly schedule selected partitions without Maui control.
-- In sched/backfill, if a job requires specific nodes, schedule other jobs
ahead of it rather than completely stopping backfill scheduling for that
partition.
-- BLUEGENE - corrected logic making block allocation work in a circular
fashion instead of linear.
* Changes in SLURM 1.2.16
=========================
-- Add --overcommit option to the salloc command.
-- Run task epilog from job's working directory rather than directory
where slurmd daemon started from.
-- Log errors running task prolog or task epilog to srun's output.
-- In sched/wiki2, fix bug processing condensed hostlist expressions.
-- Release contribs/mpich1.slurm.patch without GPL license.
-- Fix bug in mvapich plugin for read/write calls that return EAGAIN.
-- Don't start MVAPICH timeout logic until we know that srun is starting
an MVAPICH program.
-- Fix to srun only allocating number of nodes needed for requested task
count when combining allocation and step creation in srun.
-- Execute task-prolog within proctrack container to insure that all
child processes get terminated.
-- Fixed job accounting to work with sgi_job proctrack plugin.
* Changes in SLURM 1.2.15
=========================
-- In sched/wiki2, fix bug processing hostlist expressions where hosts
lack a numeric suffix.
-- Fix bug in srun. When user did not specify time limit, it defaulted to
INFINITE rather than partition's limit.
-- In select/cons_res with SelectTypeParameters=CR_Socket_Memory, fix bug in
memory allocation tracking, mem.patch from Chris Holmes, HP.
-- Add --overcommit option to the sbatch command.
* Changes in SLURM 1.2.14
=========================
-- Fix a couple of bugs in MPICH/MX support (from Asier Roa, BSC).
-- Fix perl api for AIX
-- Add wiki.conf parameter ExcludePartitions for selected partitions to
be directly schedule by Slurm without Moab control
-- Optimize load leveling for shared nodes (alloc.patch, contributed
by Chris Holmes, HP).
-- Added PMI_TIME environment variable for user to control how PMI
communications are spread out in time. See "man srun" for details.
-- Added PMI timing information to srun debug mode to aid in tuning.
Use "srun -vv ..." to see the information.
-- Added checkpoint/ompi (OpenMPI) plugin (still under development).
-- Fix bug in load leveling logic added to v1.2.13 which can cause an
infinite loop and hang slurmctld when sharing nodes between jobs.
-- Added support for sbatch to read in #PBS options from a script
* Changes in SLURM 1.2.13
=========================
-- Add slurm.conf parameter JobFileAppend.
-- Fix for segv in "scontrol listpids" on nodes not in SLURM config.
-- Add support for SCANCEL_CTLD env var.
-- In mpi/mvapich plugin, add startup timeout logic. Time based upon
SLURM_MVAPICH_TIMEOUT (value in seconds).
-- Fixed pick_step_node logic to only pick the number of nodes requested
from the user when excluding nodes, to avoid an error message.
-- Disable salloc, sbatch and srun -I/--immediate options with
Moab scheduler.
-- Added "contribs" directory with a Perl API and Torque wrappers for Torque
to SLURM migration. This directory should be used to put anything that
is outside of SLURM proper such as a different API. Perl APIs contributed
by Hongjia Cao (NUDT).
-- In sched/wiki2: add support for tasklist with node name expressions
and task counts (e.g. TASKLIST=tux[1-4]*2:tux[12-14]*4").
-- In select/cons_res with sched/wiki2: fix bug in task layout logic.
-- Removed all curses info from the bluegene plugin putting it into smap
where it belongs.
-- Add support for job time limit specification formats: min, min:sec,
hour:min:sec, and days-hour:min:sec (formerly only supported minutes).
Applies to salloc, sbatch, and srun commands.
-- Improve scheduling support for exclusive constraint list, nodes can
now be in more than one constraint specific exclusively for a job
(e.g. "srun -C [rack1|rack2|rack3|rowB] srun")
-- Create separate MPICH/MX plugin (split out from MPICH/GM plugin)
-- Increase default MessageTimeout (in slurm.conf) from 5 to 10 secs.
-- Fix bug in batch job requeue if node zero of allocation fails to respond
to task launch request.
-- Improve load leveling logic to more evenly distribute the workload
(best_load.patch, contributed by Chris Holmes, HP).
* Changes in SLURM 1.2.12
=========================
-- Increase maximum message size from 1MB to 16MB (from Ernest Artiaga, BSC).
-- In PMI_Abort(), log the event and abort the entire job step.
-- Add support for additional PMI functions: PMI_Get_clique_ranks and
PMI_Get_clique_size (from Chuck Clouston, Bull).
-- Report an error when a hostlist comes in appearing to be a box but not
formatted in XYZxXYZ format.
-- Add support for partition configuration "Shared=exclusive". This is
equivalent to "srun --exclusive" when select/cons_res is configured.
-- In sched/wiki2, report the reason for a node being unavailable for the
GETNODES command using the CAT="<reason>" field.
-- In sched/wiki2 with select/linear, duplicate hostnames in HOSTLIST, one
per allocated processor.
-- Fix bug in scancel with specific signal and job lacks active steps.
-- In sched/wiki2, add support for NOTIFYJOB ARG=<jobid> MSG=<message>.
This sends a message to an active srun command.
-- salloc will now set SLURM_NPROCS to improve srun's behavior under salloc.
-- In sched/wiki2 and select/cons_res: insure that Slurm's CPU allocation
is identical to Moab's (from Ernest Artiaga and Asier Roa, BSC).
-- Added "scontrol show slurmd" command to status local slurmd daemon.
-- Set node DOWN if prolog fails on node zero of batch job launch.
-- Properly handle "srun --cpus-per-task" within a job allocation when
SLURM_TASKS_PER_NODE environment varable is not set.
Christopher J. Morrone
committed
-- Fixed return of slurm_send_rc_msg if msg->conn_fd is < 0 set errno ENOTCONN
and return SLURM_ERROR instead of return ENOTCONN
-- Added read before we send anything down a socket to make sure the socket
is still there.
-- Add slurm.conf variables UnkillableStepProgram and UnkillableStepTimeout.
Christopher J. Morrone
committed
-- Enable nice file propagation from sbatch command.
Christopher J. Morrone
committed
* Changes in SLURM 1.2.11
=========================
-- Updated "etc/mpich1.slurm.patch" for direct srun launch of MPICH1_P4
tasks. See the "README" portion of the patch for details.
-- Added new scontrol command "show hostlist <hostnames>" to translate a list
of hostnames into a hostlist expression (e.g. "tux1,tux2" -> "tux[1-2]")
and "show hostnames <list>", returns a list of of nodes (one node per line)
from SLURM hostlist expression or from SLURM_NODELIST environment variable
if no hostlist specified.
Christopher J. Morrone
committed
-- Add the sbatch option "--wrap".
-- Add the sbatch option "--get-user-env".
-- Added support for mpich-mx (use the mpichgm plugin).
Christopher J. Morrone
committed
-- Make job's stdout and stderr file access rights be based upon user's umask
at job submit time.
-- Add support for additional PMI functions: PMI_Parse_option,
PMI_Args_to_keyval, PMI_Free_keyvals and PMI_Get_options (from Puenlap Lee
and Nancy Kritkausky, Bull).
-- Make default value of SchedulerPort (configuration parameter) be 7321.
-- Use SLURM_UMASK environment variable (if set) at job submit time as umask
for spawned job.
-- Correct some format issues in the man pages (from Gennero Oliva, ICAR).
-- Added support for parallel make across an existing SLURM allocation
based upon GNU make-3.81. Patch is in "etc/make.slurm.patch".
-- Added '-b' option to sbatch for easy MOAB trasition to sbatch instead of
srun. Option does nothing in sbatch.
-- Changed wiki2's handling of a node state in Completing to return 'busy'
instead of 'running' which matches slurm version 1.1
Christopher J. Morrone
committed
Christopher J. Morrone
committed
-- Fix race condititon in jobacct/linux with use of proctrack/pgid and a
realloc issue inside proctrack/linux
Christopher J. Morrone
committed
-- Added MPICH1_P4 plugin for direct launch of mpich1/p4 tasks using srun
and a patched version of the mpi library. See "etc/mpich1.slurm.patch".
NOTE: This is still under development and not ready for production use.
-- Add new sinfo field to sort by "%E" sorts by the time associated with a
node's state (from Prashanth Tamraparni, HP).
-- In sched/wiki: fix logic for restarting backup slurmctld.
-- Preload SLURM plugins early in the slurmstepd operation to avoid
multiple dlopens after forking (and to avoid a glibc bug
that leaves dlopen locks in a bad state after a fork).
-- Added MPICH1_P4 patch to launch tasks using srun rather than rsh and
automatically generate mpirun's machinefile based upon the job's
allocation. See "etc/mpich1.slurm.patch".
-- BLUEGENE - fix for overlap mode to mark all other base partitions as used
when creating a new block from the file to insure we only use the base
partitions we are asking for.
-- Fix in proctrack/sgi_job plugin that could cause slurmstepd to seg_fault
preventing timely clean-up of batch jobs in some cases.
* Changes in SLURM 1.2.7
========================
-- BLUEGENE - code to make it so you can make a 36x36x36 system.
Danny Auble
committed
The wiring should be correct for a system with x-dim of 1,2,4,5,8,13
in emulation mode. It will work with any real system no matter the size.
-- Major re-write of jobcomp/script plugin: fix memory leak and
general code clean-up.
-- Add ability to change MaxNodes and ExcNodeList for pending job
using scontrol.
-- Purge zombie processes spawned via event triggers.
-- Add support for power saving mode (experimental code to reduce voltage
and frequency on nodes that stay in the IDLE state, for more information
see http://www.llnl.gov/linux/slurm/power_save.html). None of this
code is enabled by default.
Moe Jette
committed
* Changes in SLURM 1.2.6
========================
-- Fix MPIRUN_PORT env variable in mvapich plugin
-- Disable setting triggers by other than user SlurmUser unless SlurmUser
is root for improved security.
Moe Jette
committed
* Changes in SLURM 1.2.5
========================
-- Fix nodelist truncation in "scontrol show jobs" output
-- In mpi/mpichgm, fix potential problem formatting GMPI_PORT, from
Ernest Artiaga, BSC.
-- In sched/wiki2 - Report job's account, from Ernest Artiaga, BSC.
-- Add sbatch option "--ntasks-per-node".
* Changes in SLURM 1.2.4
========================
-- In select/cons_res - fix for function argument type mis-match in getting
CPU count for a job, from Ernest Artiaga, BSC.
-- In sched/wiki2 - Report job's tasks_per_node requirement.
-- In forward logic fix to check if the forwarding node recieves a connection
but doesn't ever get the message from the sender (network issue or
something) also check to make sure if we get something back we make sure
we account for everything we sent out before we call it good.
-- Another fix to make sure steps with requested nodes have correct cpus
accounted for and a fix to make sure the user can't allocate more
cpus than the have requested.
* Changes in SLURM 1.2.3
========================
-- Cpuset logic added to task/affinity, from Don Albert (Bull) and
Moe Jette (LLNL). The /dev/cpuset file system must be mounted and
set "TaskPluginParam=cpusets" in slurm.conf to enable.
-- In sched/wiki2, fix possible overflow in job's nodelist, from
Ernest Artiaga, BSC.
-- Defer creation of new job steps until a suspended job is resumed.
-- In select/linear - fix for potential stack corruption bug.
* Changes in SLURM 1.2.2
========================
-- Added new command "strigger" for event trigger management, a new
capability. See "man strigger" for details.
-- srun --get-user-env now sends su's stderr to /dev/null
-- Fix in node_scheduling logic with multiple node_sets, from
Ernest Artiaga, BSC.
-- In select/cons_res, fix for function argument type mis-match in getting
CPU count for a job.
-- MPICHGM support bug fixes from Ernest Artiaga, BSC.
-- Support longer hostlist strings, from Ernest Artiaga, BSC.
-- Srun to use env vars for SLURM_PROLOG, SLURM_EPILOG, SLURM_TASK_PROLOG,
and SLURM_TASK_EPILOG. patch.1.2.0-pre11.070201.envproepilog from
Dan Palermo, HP.
-- Documenation update. patch.1.2.0-pre11.070201.mchtml from Dan Palermo, HP.
-- Set SLURM_DIST_CYCLIC = 1 (needed for HP MPI, slurm.hp.env.patch).
* Changes in SLURM 1.2.0-pre15
==============================
-- Fix for another spot where the backup controller calls switch/federation
code before switch/federation is initialized.
* Changes in SLURM 1.2.0-pre14
==============================
-- In sched/wiki2, clear required nodes list when a job is requeued.
Note that the required node list is set to every node used when
a job is started via sched/wiki2.
-- BLUEGENE - Added display of deallocating blocks to smap and other tools.
-- Make slurmctld's working directory be same as SlurmctldLogFile (if any),
otherwise StateSaveDir (which is likely a shared directory, possibly
making core file identification more difficult).
-- Fix bug in switch/federation that results in the backup controller
aborting if it receives an epilog-complete message.
* Changes in SLURM 1.2.0-pre13
==============================
-- Fix for --get-user-env.
* Changes in SLURM 1.2.0-pre12
==============================
Danny Auble
committed
-- BLUEGENE - Added correct node info for sinfo and sview for viewing
allocated nodes in a partition.
-- BLUEGENE - Added state save on slurmctld shutdown of blocks in an error
state on real systems and total block config on emulation systems.
-- Major update to Slurm's PMI internal logic for better scalability.
Communications now supported directly between application tasks via
Slurm's PMI library. Srun sends single message to one task on each node
and that tasks forwards key-pairs to other tasks on that nodes. The old
code sent key-pairs directly to each task.
NOTE: PMI applications must re-link with this new library.
-- For multi-core support: Fix task distribution bug and add automated
tests, patch.1.2.0-pre11.070111.plane from Dan Palermo (HP).
* Changes in SLURM 1.2.0-pre11
==============================
-- Add multi-core options to slurm_step_launch API.
-- Add man pages for slurm_step_launch() and related functions.
Danny Auble
committed
-- Jobacct plugin only looks at the proctrack list instead of the entire
list of processes running on the node. Cutting down a lot of unnecessary
file opens in linux and cutting down the time to query the procs by
more than half.
-- Multi-core bug fix, mask re-use with multiple job steps,
patch.1.2.0-pre10.061214.affinity_stepid from Dan Palermo (HP).
-- Modify jobacct/linux plugin to completely eliminate open /proc files.
-- Added slurm_sched_plugin_reconfig() function to re-read config files.
-- BLUEGENE - --reboot option to srun, salloc, and sbatch actually works.
-- Modified step context and step launch APIs.
* Changes in SLURM 1.2.0-pre10
==============================
-- Fix for sinfo node state counts by state (%A and %F output options).
-- Add ability to change a node's features via "scontrol update". NOTE:
Update slurm.conf also to preserve changes over slurmctld restart or
reconfig.
NOTE: Job and node state information can not be preserved from earlier
versions.
-- Added new slurm.conf parameter TaskPluginParam.
-- Fix for job requeue and credential revoke logic from Hongjia Cao (NUDT).
-- Fix for incorrectly generated masks for task/affinity plugin,
patch.1.2.0-pre9.061207.bitfmthex from Dan Palermo (HP).
-- Make mask_cpu options of srun and slaunch commands not requeue prefix
of "0x". patch.1.2.0-pre9.061208.srun_maskparse from Dan Palermo (HP).
-- Add -c support to the -B automatic mask generation for multi-core
support, patch.1.2.0-pre9.061208.mcore_cpuspertask from Dan Palermo (HP).
-- Fix bug in MASK_CPU calculation,
patch.1.2.0-pre9.061211.avail_cpuspertask from Dan Palermo (HP).
-- BLUEGENE - Added --reboot option to srun, salloc, and sbatch commands.
-- Add "scontrol listpids [JOBID[.STEPID]]" support.
-- Multi-core support patches, fixed SEGV and clean up output for large
task counts, patch.1.2.0-pre9.061212.cpubind_verbose from Dan Palermo (HP).
-- Make sure jobacct plugin files are closed before exec of user tasks to
prevent problems with job checkpoint/restart (based on work by
Hongjia Cao, NUDT).
* Changes in SLURM 1.2.0-pre9
=============================
-- Fix for select/cons_res state preservation over slurmctld restart,
patch.1.2.0-pre7.061130.cr_state from Dan Palermo.
-- Validate product of socket*core*thread count on node registration rather
than individual values. Correct values will need to be specified in slurm.conf
with FastSchedule=1 for correct multi-core scheduling behavior.
* Changes in SLURM 1.2.0-pre8
=============================
-- Modity job state "reason" field to report why a job failed (previously
previously reported only reason waiting to run). Requires cold-start of
slurmctld (-c option).
-- For sched/wiki2 job state request, return REJMESSAGE= with reason for
a job's failure.
-- New FastSchedule configuration parameter option "2" means to base
scheduling decisions upon the node's configuration as specified in
slurm.conf and ignore the node's actual hardware configuration. This
can be useful for testing.
-- Add sinfo output format option "%C" for CPUs (active/idle/other/total).
Based upon work by Anne-Marie Wunderlin (BULL).
-- Assorted multi-core bug fixes (patch1.2.0-pre7.061128.mcorefixes).
-- Report SelectTypeParameters from "scontrol show config".
-- Build sched/wiki plugin for Maui Scheduler (based upon new sched/wiki2
code for Moab Scheduler).
Danny Auble
committed
-- BLUEGENE - changed way of keeping track of smaller partitions using
ionode range instead of quarter nodecard notation.
(i.e. bgl000[0-3] instead of bgl000.0.0)
-- Patch from Hongjia Cao (EINPROGRESS error message change)
-- Fix for correct requid for jobacct plugin
-- Added subsec timing display for sacct
* Changes in SLURM 1.2.0-pre7
=============================
-- BLUEGENE - added configurable images for bluegene block creation.
-- Support processors, core, and physical IDs that are not in numeric
order (in slurmd to gathering node state information, based on patch
by Don Albert, Bull).
-- Fixed bug with aix not looking in the correct dir for the proctrack
include files
-- Removed global_srun.* from common merged it into srun proper
-- Added bluegene section to troubleshooting guide (web page).
-- NOTE: Requires cold-start when moving from 1.2.0-pre6, save state
info for jobs changed.
-- BLUEGENE - Changed logic for wiring bgl blocks to be more maintainable.
(Haven't tested on large system yet, works on 2 base partition system)
-- Do not read the select/cons_res state save file if slurmctld is
cold-started (with the "-c" option).
* Changes in SLURM 1.2.0-pre6
=============================
-- Maintain actually job step run time with suspend/resume use.
-- Allow slurm.conf options to appear multiple times. SLURM will use the
last instance of any particular option.
-- Add version number to node state save file. Will not recover node
state information on restart from older version.
-- Add logic to save/restore multi-core state information.
-- Updated multi-core logic to use types uint16_t and uint32_t instead
of just type int.
-- Race condition for forwarding logic fix from Hongjia Cao
-- Add support for Portable Linux Processor Affinity (PLPA, see
http://www.open-mpi.org/software/plpa).
-- When a job epilog completes on all non-DOWN nodes, immediately purge
it's job steps that lack switch windows. Needed for LSF operation.
Based upon slurm.hp.node_fail.patch.
-- Modify srun to ignore entries on --nodelist for job step creation
if their count exceeds the task count. Based on slurm.hp.srun.patch.
* Changes in SLURM 1.2.0-pre5
=============================
-- Patch from HP patch.1.2.0.pre4.061017.crcore_hints, supports cores as
consumable resource.
-- Added node_inx to job_step_info_t to get the node indecies for mapping out
Danny Auble
committed
steps in a job by nodes.
-- sview grid added
-- BLUEGENE node_inx added to blocks for reference.
-- Automatic CPU_MASK generation for task launch, new srun option -B.
-- Automatic logical to physical processor identification and mapping.
-- Added new srun options to --cpu_bind: sockets, cores, and threads
-- Updated select/cons_res to operate as socket granularity.
-- New srun task distribution options to -m: plane
-- Multi-core support in sinfo, squeue, and scontrol.
-- Memory can be treated as a consumable resource.
-- New srun options --ntasks-per-[node|socket|core].
* Changes in SLURM 1.2.0-pre3
=============================
-- Remove configuration parameter ShedulerAuth (defunct).
-- Add NextJobId to "scontrol show config" output.
-- Add new slurm.conf parameter MailProg.
-- New forwarding logic. New recieve_msg functions depending on what you
are expecting to get back. No srun_node_id anymore passed around in
a slurm_msg_t
-- Remove sched/wiki plugin (use sched/wiki2 for now)
-- Disable pthread_create() for PMI_send when TotalView is running for
better performance.
-- Fixed certain tests in test suite to not run with bluegene or front-end
Danny Auble
committed
systems
-- Removed addresses from slurm_step_layout_t
-- Added new job field, "comment". Set by srun, salloc and sbatch. See
with "scontrol show job". Used in sched/wiki2.
-- Report a job's exit status in "scontrol show job".
-- In sched/wiki2: add support for JOBREQUEUE command.
* Changes in SLURM 1.2.0-pre2
=============================
-- Added function slurm_init_slurm_msg to be used to init any slurm_msg_t
you no longer need do any other type of initialization to the type.
* Changes in SLURM 1.2.0-pre2
=============================
-- Fixed task dist to work with hostfile and warn about asking for more tasks
than you have nodes for in arbitray mode.
-- Added "account" field to job and step accounting information and sacct output.
Danny Auble
committed
-- Moved task layout to slurmctld instead of srun. Job step create returns
step_layout structure with hostnames and addresses that corrisponds
to those nodes.
-- Changed api slurm_lookup_allocation params,
resource_allocation_response_msg_t changed to job_alloc_info_response_msg_t
this structure is being renamed so contents are the same.
-- alter resource_allocation_response_msg_t see slurm.h.in
-- remove old_job_alloc_msg_t and function slurm_confirm_alloc
-- Slurm configuration files now support an "Include" directive to
include other files inline.
Danny Auble
committed
-- BLUEGENE New --enable-bluegene-emulation configure parameter to allow
running system in bluegene emulation mode. Only
really useful for developers.
-- New added new tool sview GUI for displaying slurm info.
-- fixed bug in step layout to lay out tasks correctly
* Changes in SLURM 1.2.0-pre1
=============================
-- Fix bug that could run a job's prolog more than once
-- Permit batch jobs to be requeued, scontrol requeue <jobid>
-- Send overcommit flag from srun in RPCs and have slurmd set SLURM_OVERCOMMIT
flag at batch job launch time.
-- Added new configuration parameter MessageTimeout (replaces #define in
the code)
* Changes in SLURM 1.1.37
=========================
- In sched/wiki2: Add NAME to job record.
- Changed -w (--nodelist) option to only read in number of nodes specified
by -N option unless nprocs was set and in Arbitrary layout mode.
- Added some loops around pthread creates incase they fail and also fixed an
issue in srun to fail job has failed instead of waiting around for threads
that will never end.
- Added fork handlers in the slurmstepd
- In sched/wiki2: fix logic for restarting backup slurmctld.
- In sched/wiki2: if job has no time limit specified, return the partition's
time limit (which is the default for the job) rather than 365 days.
* Changes in SLURM 1.1.36
=========================
- Permit node state specification of DRAIN in slurm.conf.
- In jobcomp/script - fix bug that prevented UID and JOBID environment
variables from being set.
* Changes in SLURM 1.1.35
=========================
- In sched/wiki2: Add support for CMD=SIGNALJOB to accept option
of VALUE=SIGXXX in addition to VALUE=# and VALUE=XXX options.
- In sched/wiki2: Add support for CMD=MODIFYJOB to accept option of
DEPEND=afterany:<jobid>, specify jobid=0 to clear.
- Correct logic for job allocation with task count (srun -n ...) AND
FastSchedule=0 AND low CPUs count in Slurm's node configuration.
- Add new and undocumented scancel option, --ctld, to route signal
requests through slurmctld rather than directly to slurmd daemons.
Useful for testing purposes.
- Fixed issue with hostfile support not working in a job step.
- Set supplemental groups for SlurmUser in slurmctld daemon, from
Anne Marie Wunderlin, Bull.
- In jobcomp/script: Add ACCOUNT and PROCS (count) to environment
variables set. Fix bug that prevented UID and JOBID from being
overwritten.
* Changes in SLURM 1.1.34
=========================
- Insure that slurm_signal_job_step() is defined in srun for mvapich
and mpichgm error conditions.
- Modify /etc/init.d/slurm restart command to wait for daemon to terminate
before starting a new one
- Permit job steps to be started on draining nodes that have already
been allocated to that job.
- Prevent backup slurmctld from purging pending batch job scripts when a
SIGHUP is received.
- BLUEGENE - check to make sure set_block_user works when the block
is in a ready state.
- Fix to slurmstepd to not use local variables in a pthread create.
- In sched/wiki2 - add wiki.conf paramter HostFormat specifying
format of hostlists exchanged between Slurm and Moab (experimental).
- mpi/mvapich: Support Adam Moody's fast MPI initialization protocol
(MVAPICH protocol version 8).
* Changes in SLURM 1.1.33
=========================
- sched/wiki2 - Do not wait for job completion before permitting
additional jobs to be scheduled.
- Add srun SLURM_EXCLUSIVE environment variable support, from
Gilles Civario (Bull).
- sched/wiki2 - Report job's node sharing options.
- sched/wiki2 - If SchedulerPort is in use, retry opening it indefinitely.
- sched/wiki2 - Add support for changing the size of a pending job.
- BLUEGENE - Fix to correctly look at downed/drained nodes with picking
a block to run a job and not confuse it with another running job.
* Changes in SLURM 1.1.32
=========================
- If a job's stdout/err file names are unusable (bad path), use the
default names.
- sched/wiki2 - Fix logic to be compatible with select/cons_res plugin
for allocating individual processors within nodes.
- Fix job end time calculation when changed from an initial value of
INFINITE.
Christopher J. Morrone
committed
* Changes in SLURM 1.1.31
=========================
- Correctly identify a user's login shell when running "srun -b --uid"
as root. Use the --uid field for the /etc/passwd lookup instead of
getuid().
* Changes in SLURM 1.1.30
=========================
Christopher J. Morrone
committed
- Fix to make sure users don't include and exclude the same node in
their srun line.
- mpi/mvapich: Forcibly terminate job 60s after first MPI_Abort()
to avoid waiting indefinitely for hung processes.
- proctrack/sgi_job: Fix segv when destroying an active job container
with processes still running.
- Abort a job's stdout/err to srun if not processed within 5 minutes
(prevents node hanging in completing state if the srun is stopped).
* Changes in SLURM 1.1.29
=========================
- Fix bug which could leave orphan process put into background from
batch script.
* Changes in SLURM 1.1.28
=========================
- BLUEGENE - Fixed issue with nodes that return to service outside of an
admin state is now updated in the bluegene plugin.
- Fix for --get-user-env parsing of non-printing characters in users' logins.
- Restore "squeue -n localhost" support.
- Report lack of PATH env var as verbose message, not error in srun.
* Changes in SLURM 1.1.27
=========================
- Fix possible race condition for two simultaneous "scontrol show config"
calls resulting in slurm_xfree() Error: from read_config.c:642
- BLUEGENE - Put back logic to make a block fail a boot 3 times before
cancelling a users job.
- Fix problem using srun --exclude option for a job step.
- Fix problem generating slurmd error "Unrecognized request: 0" with
some compilers.
* Changes in SLURM 1.1.26
=========================
- In sched/wiki2, fixes for support of job features.
- In sched/wiki2, add "FLAGS=INTERACTIVE;" to GETJOBS response for
non-batch (not srun --batch) jobs.
* Changes in SLURM 1.1.25
=========================
- switch/elan: Fix for "Failed to initialise stats structure" from
libelan when ELAN_STATKEY > MAX_INT.
- Tune PMI support logic for better scalability and performance.
- Fix for running a task on each node of an allocation if not specified.
- In sched/wiki2, set TASKLIST for running jobs.
- In sched/wiki2, set STARTDATE for pending jobs with deferred start.
- Added srun --get-user-env option (for Moab scheduler).
* Changes in SLURM 1.1.24
=========================
- In sched/wiki2, add support for direct "srun --dependency=" use.
- mpi/mvapich: Add support for MVAPICH protocol version 6.
- In sched/wiki2, change "JOBMODIFY" command to "MODIFYJOB".
- In sched/wiki2, change "JOBREQUEUE" command to "REQUEUEJOB".
- For sched/wiki2, permit normal user to specify arbitrary job id.
- In sched/wiki2, set buffer pointer to NULL after free() to avoid
possible memory corruption.
- In sched/wiki2, report a job's exit code on completion.
- For AIX, fix mail for job event notification.
- Add documentation for propagation options in man srun and slurm.conf.
* Changes in SLURM 1.1.23
=========================
- Fix bug in non-blocking connect() code affecting AIX.
Christopher J. Morrone
committed
* Changes in SLURM 1.1.22
=========================
- Add squeue option to print a job step's task count (-o %A).
- Initialize forward_struct to avoid trying to free a bad pointer,
patch from Anton Blanchard (SAMBA).
- In sched/wiki2, fix fatal race condition on slurmctld startup.
- Fix for displaying launching verbose messages for each node under the
tree instead of just the head one.
- Fix job suspend bug, job accounting plugin would SEGV when given a
bad job ID.
* Changes in SLURM 1.1.21
=========================
- BLUEGENE - Wait on a fini to make sure all threads are finished before
cleaning up.
- BLUEGENE - replacements to not destroy lists but just empty it to avoid
losing the pointer to the list in the block allocator.
- BLUEGENE - added --enable-bluegene-emulation configure option to 1.1
- In sched/wiki2, enclose a job's COMMENT value in double quotes.
- In sched/wiki2, support newly defined SIGNALJOB command.
- In sched/wiki2, maintain open event socket, don't open and close
for each event.
- In sched/wiki2, fix for scalability problem starting large jobs.
- Fix logic to execute a batch job step (under an existing resource
allocation) as needed by LSF.
- Patches from Hongjia Cao (pmi finialize issues and type declaration)
- Delete pending job if it's associated partition is deleted.
- fix for handling batch steps completing correctly and setting the
return code.
- Altered ncurses check to make sure programs can link before saying we
have a working curses lib and header.
- Fixed an init issue with forward_struct_init not being set correctly in
a few locations in the slurmd.
- Fix for user to use the NodeHostname (when specified in the slurm.conf file)
to start jobs on.
Christopher J. Morrone
committed
* Changes in SLURM 1.1.20
=========================
- Added new SPANK plugin hook slurm_spank_local_user_init() called
from srun after node allocation.
- Fixed bug with hostfile support not working on a direct srun
* Changes in SLURM 1.1.19
=========================
- BLUEGENE - make sure the order of blocks read in from the bluegene.conf
are created in that order (static mode).
- Fix logic in connect(), slurmctld fail-over was broken in v1.1.18.
- Fix logic to calculate the correct timeout for fan out.
* Changes in SLURM 1.1.18
=========================
- In sched/wiki2, add support for EHost and EHostBackup configuration
parameters in wiki.conf file
- In sched/wiki2, fix memory management bug for JOBWILLRUN command.
- In sched/wiki2, consider job Busy while in Completing state for
KillWait+10 seconds (used to be 30 seconds).
- BLUEGENE - Fixes to allow full block creation on the system and not to add
passthrough nodes to the allocation when creating a block.
- BLUEGENE - Fix deadlock issue with starting and failing jobs at the same
time
- Make connect() non-blocking and poll() with timeout to avoid huge
waits under some conditions.
- Set "ENVIRONMENT=BATCH" environment variable for "srun --batch" jobs only.
- Add logic to save/restore select/cons_res state information.
Christopher J. Morrone
committed
- BLUEGENE - make all sprintf's into snprintf's
Christopher J. Morrone
committed
- Fix for "srun -A" segfault on a node failure.
* Changes in SLURM 1.1.17
=========================
- BLUEGENE - fix to make dynamic partitioning not go create block where
there are nodes that are down or draining.
- Fix srun's default node count with an existing allocation when neither
SLURM_NNODES nor -N are set.
- Stop srun from setting SLURM_DISTRIBUTION under job steps when a
specific was not explicitly requested by the user.
* Changes in SLURM 1.1.16
=========================
- BLUEGENE - fix to make prolog run 5 minutes longer to make sure we have
enough time to free the overlapping blocks when starting a new job on a
block.
- BLUEGENE - edit to the libsched_if.so to read env and look at
MPIRUN_PARTITION to see if we are in slurm or running mpirun natively.
- Plugins are now dlopened RTLD_LAZY instead of RTLD_NOW.
* Changes in SLURM 1.1.15
=========================
- BLUEGENE - fix to be able to create static partitions
- Fixed fanout timeout logic.
- Fix for slurmctld timeout on outgoing message (Hongjia Cao, NUDT.edu.cn).
* Changes in SLURM 1.1.14
=========================
- In sched/wiki2: report job/node id and state only if no changes since
time specified in request.
- In sched/wiki2: include a job's exit code in job state information.
- In sched/wiki2: add event notification logic on job submit and completion.
- In sched/wiki2: add support for JOBWILLRUN command type.
- In sched/wiki2: for job info, include required HOSTLIST if applicable.
- In sched/wiki2: for job info, replace PARTITIONMASK with RCLASS (report
partition name associated with a job, but no task count)
- In sched/wiki2: for job and node info, report all data if TS==0,
volitile data if TS<=update_time, state only if TS>update_time
- In sched/wiki2: add support for CMD=JOBSIGNAL ARG=jobid SIGNAL=name or #
- In sched/wiki2: add support for CMD=JOBMODIFY ARG=jobid [BANK=name]
[TIMELIMIT=minutes] [PARTITION=name]
- In sched/wiki2: add support for CMD=INITIALIZE ARG=[USEHOSTEXP=T|F]
[EPORT=#]; RESPONSE=EPORT=# USEHOSTEXP=T
- In sched/wiki2: fix memory leak.
- Fix sinfo node state filtering when asking for idle nodes that are also
draining.
- Add Fortran extension to slurm_get_rem_time() API.
- Fix bug when changing the time limit of a running job that has previously
been suspended (formerly failed to account for suspend time in setting
termination time).
- fix for step allocation to be able to specify only a few nodes in a
step and ask for more that specified.
- patch from Hongjia Cao for forwarding logic
- BLUEGENE - able to allocate specific nodes without locking up.
- BLUEGENE - better tracking of blocks that are created dynamically,
less hitting the db2.
* Changes in SLURM 1.1.13
=========================
- Fix hang in sched/wiki2 if Moab stops responding responding when
response is outgoing.
- BLUEGENE - fix to make sure the block is good to go when picking it
- BLUEGENE - add libsched_if.so so mpirun doesn't try to create a block
by itself.
- Enable specification of srun --jobid=# option with --batch (for user root).
- Verify that job actually starts when requested by sched/wiki2.
- Add new wiki.conf parameters: EPort and JobAggregationTime for event
notification logic (see wiki.conf man page for details)
* Changes in SLURM 1.1.12
=========================
- Sched/wiki2 to report a job's account as COMMENT response to GETJOBS
request.
- Add srun option "--comment" (maps to job account until slurm v1.2,
needed for Moab scheduler functionality).
- fixed some timeout issues in the controller hopefully stopping all the
issues with excessive timeouts.
- unit conversion (i.e. 1024 => 1k) only happens on bgl systems for node
count.
- Sched/wiki2 to report a job's COMPETETIME and SUSPENDTIME in GETJOBS
response.
- Added support for Mellanox's version of mvapich-0.9.7.
* Changes in SLURM 1.1.11
=========================
- Update file headers adding permission to link with OpenSSL.
- Enable sched/wiki2 message authentication.
- Fix libpmi compilation issue.
- Remove "gcc-c++ python" from slurm.spec BuildRequires. It breaks
the AIX build, so we'll have to find another way to deal with that.
* Changes in SLURM 1.1.10
=========================
-- task distribution fix for steps that are smaller than job allocation.
-- BLUEGENE - fix to only send a success when block was created when trying
to allocate the block.
-- fix so if slurm_send_recv_node_msg fails on the send the auth_cred returned
by the resp is NULL.
-- Fix switch/federation plugin so backup controller can assume control
repeatedly without leaking or corrupting memory.
-- Add new error code (for Maui/Moab scheduler): ESLURM_JOB_HELD
-- Tweak slurmctld's node ping logic to better handle failed nodes with
hierarchical communications fail-over logic.
-- Add support for sched/wiki specific configuration file "wiki.conf".
-- Added sched/wiki2 plugin (new experimental wiki plugin).
* Changes in SLURM 1.1.9
========================
Christopher J. Morrone
committed
-- BLUEGENE - fix to handle a NO_VAL sent in as num procs in the job
description.
-- Fix bug in slurmstepd code for parsing --multi-prog command script.
Parser was failing for commands with no arguments.
-- Fix bug to check unsigned ints correctly in bitstring.c
-- Alter node count covert to kilo to only convert number divisible by
1024 or 512
* Changes in SLURM 1.1.8
========================
-- Added bug fixes (fault-tolerance and memory leaks) from Hongjia Cao
<hjcao@nudt.edu.cn>
-- Gixed some potential BLUEGENE issues with the bridge log file not having
a mutex around the fclose and fopen.
-- BLUEGENE - srun -n procs now regristers correctly
-- Fixed problem with reattach double allocating step_layout->tids
-- BLUEGENE - fix race condition where job is finished before it starts.
* Changes in SLURM 1.1.7
========================
-- BLUEGENE - fixed issue with doing an allocation for nodes since asking
for 32,128, or 512 all mean 1 to the controller.
Christopher J. Morrone
committed
-- Add "Include" directive to slurm.conf files. If "Include" is found
at the beginning of a line followed by whitespace and then
the full path to a file, that file is included inline with the current
slurm.conf file.
* Changes in SLURM 1.1.6
========================
-- Improved task layout for relative positions
-- Fixed heterogeous cpu overcommit issue
-- Fix bug where srun would hang if it ran on one node and that
node's slurmd died
-- Fix bug where srun task layout would be bad when min-max node range is
specified (e.g. "srun -N1-4 ...")
-- Made slurmctld_conf.node_prefix only be set on Bluegene systems.
-- Fixed a race condition in the controller to make it so a plugin thread
wouldn't be able to access the slurmctld_conf structure before it was
filled.
* Changes in SLURM 1.1.5
========================
-- Ignore partition's MaxNodes for SlurmUser and root.
-- Fix possible memory corruption with use of PMI_KVS_Create call.
-- Fix race condition when multiple PMI_KVS_Barrier calls.
-- Fix logic in which slurmctld outgoing RPC requests could get delayed.
-- Fix logic for laying out steps without a hostlist.
* Changes in SLURM 1.1.4
========================
-- Improve error handling in hierarchical communications logic.
* Changes in SLURM 1.1.3
========================
-- Fix big-endian bug in the bitstring code which plagued AIX.
-- Fix bug in handling srun's --multi-prog option, could go off end of buffer.
-- Added support for job step completion (and switch window release) on
subset of allocated nodes.
-- BLUEGENE - removed configure option --with-bg-link bridge is linked with
dlopen now no longer needing fake database so files on frontend node.
-- BLUEGENE - implemented use of rm_get_partition_info instead of
...partitions_info which has made a much better design improving stability.
-- Streamline PMI communications and increase timeouts for highly parallel
jobs. Improves scalability of PMI.
* Changes in SLURM 1.1.2
========================
-- Fix bug in jobcomp/filetxt plugin to report proper NodeCnt when a job
fails due to a node failure.
-- Fix Bluegene configure to work with the new 64bit libs.
-- Fix bug in controller that causes it to segfault when hit with a malformed
message.
-- For "srun --attach=X" to other users job, report an error and exit (it
previously just hung).
-- BLUEGENE - fix for doing correct small block logic on user error.
-- BLUEGENE - Added support in slurmd to create a fake libdb2.so if it
doesn't exist so smap won't seg fault
-- BLUEGENE - "scontrol show job" reports "MaxProcs=None" and "Start=None"
if values are not specified at job submit time
-- Add retry logic for PMI communications, may be needed for highly parallel
jobs.
-- Fix bug in slurmd where variable is used in logging message after freed
(slurmstepd rank info).
-- Fix bug in scontrol show daemons if NodeName=localhost will work now to
display slurmd as place where it is running.
-- Patch from HP for init nodes before init_bitmaps
-- ctrl-c killed sruns will result in job state as cancelled instead of
completed.
-- BLUEGENE - added configure option --with-bg-link to choose dynamic linking
or static linking with the bridgeapi.
* Changes in SLURM 1.1.1
========================
-- Fix bug in packing job suspend/resume RPC.
-- If a user breaks out of srun before the allocation takes place, mark the
job as CANCELLED rather than COMPLETED and change its start and end time
to that time.
-- Fix bug in PMI support that prevented use of second PMI_Barrier call.
This fix is needed for MVAPICH2 use.
-- Add "-V" options to slurmctld and slurmd to print version number and exit.
-- Fix scalability bug in sbcast.
-- Fix bug in cons_res allocation strategy.
-- Fix bug in forwarding with mpi
-- Fix bug sacct forwarding with stat option
-- Added nodeid to sacct stat information
-- cleaned up way slurm_send_recv_node_msg works no more clearing errno
-- Fix error handling bug in the networking code that causes the slurmd to
xassert if the server is not running when the slurmd tries to register.
* Changes in SLURM 1.1.0
========================
-- Fix bug that could temporarily make nodes DOWN when they are really
responding.
-- Fix bug preventing backup slurmctld from responding to PING RPCs.
-- Set "CFLAGS=-DISO8601" before configuration to get ISO8601 format
times for all SLURM commands. NOTE: This may break Moab, Maui, and/or
LSF schedulers.
-- Fix for srun -n and -O options when paired with -b.
Danny Auble
committed
-- Added logic for fanout to failover to forward list if main node is
unreachable
-- sacct also now keeps track of submitted, started and ending times of jobs
-- reinit config file mutex at beginning of slurmstepd to avoid fork issues
Danny Auble
committed
* Changes in SLURM 1.1.0-pre8
=============================
-- Fix bug in enforcement of partition's MaxNodes limit.
Danny Auble
committed
-- BLUEGENE - added support for srun -w option also fixed the geometry option
for srun.
Danny Auble
committed
* Changes in SLURM 1.1.0-pre7
=============================
-- Accounting works for aix systems, use jobacct/aix
-- Support large (over 2GB) files on 32-bit linux systems
Danny Auble
committed
-- changed all writes to safe_write in srun
-- added $float to globals.example in the testsuite
-- Set job's num_proc correctly for jobs that do not have exclusive use
of it's allocated nodes.
-- Change in support for test suite: 'testsuite/expect/globals.example'
is now 'testsuite/expect/globals' and you can override variable
settings with a new file 'testsuite/expect/globals.local'.
-- Job suspend now sends SIGTSTP, sleep(1), sends SIGSTOP for better
MPI support.
-- Bluegene - before assigning a job to a block the plugin will check the bps
to make sure they aren't in error state.
-- Change time format in job completion logging (JobCompType=jobcomp/filetxt)
from "MM/DD HH:MM:SS" to "YYYY-MM-DDTHH:MM:SS", conforming with the ISO8601
standard format.
* Changes in SLURM 1.1.0-pre6
=============================
-- Added logic to "stat" a running job with sacct option -S use -j to specify
job.step
Danny Auble
committed
-- removed jobacct/bluegene (no real need for this) meaning, I don't think
there is a way to gather the data yet.
-- Added support for mapping "%h" in configured SlurmdLog to the hostname.
-- Add PropagatePrioProcess to control propagation of a user's nice value
to spawned tasks (based upon work by Daniel Christians, HP).
Danny Auble
committed
* Changes in SLURM 1.1.0-pre5
=============================
-- Added step completion RPC logic
-- Vastly changed sacct and the jobacct plugin. Read documentation for full
details.
-- Added jobacct plugin for AIX and BlueGene, they currently don't work,
but infrastructure is in place.
-- Add support for srun option --ctrl-comm-ifhn to set PMI communications
address (Hongjia Cao, National University of Defense Technology).
-- Moved safe_read/write to slurm_protocol_defs.h removing multiple copies.
-- Remove vestigial functions slurm_allocate_resources_and_run() and
slurm_free_resource_allocation_and_run_response_msg().
-- Added support for different executable files and arguments by task based
upon a configuration file. See srun's --multi-prog option (based upon
work by Hongjia Cao, National University of Defense Technology).
-- moved the way forward logic waited for fanout logic mostly eliminating
problems with scalability issues.
-- changed -l option in sacct to display different params see sacct/sacct.h
for details.
Danny Auble
committed
* Changes in SLURM 1.1.0-pre4
=============================
-- Bluegene specific - Added support to set bluegene block state to
free/error via scontrol update BlockName
-- Add needed symbol to select/bluegene in order to load plugin.
Danny Auble
committed
* Changes in SLURM 1.1.0-pre3
=============================
-- Added framework for XCPU job launch support.
Christopher J. Morrone
committed
-- New general configuration file parser and slurm.conf handling code.
Allows long lines to be continued on the next line by ending with a "\".
Whitespace is allowed between the key and "=", and between the "=" and
value.
WARNING: A NodeName may now occur only once in a slurm.conf file.
If you want to temporarily make nodes DOWN in the slurm.conf,
use the new DownNodes keyword (see "man slurm.conf").
-- Gracefully handle request to submit batch job from within an existing
batch job.
Moe Jette
committed
-- Warn user attempting to create a job allocation from within an existing job
allocation.
-- Add web page description for proctrack plugin.
-- Add new function slurm_get_rem_time() for job's time limit.
-- JobAcct plugin renamed from "log" to "linux" in preparation for support of
new system types.
WARNING: "JobAcctType=jobacct/log" is no longer supported.
-- Removed vestigal 'bg' names from bluegene plugin and smap
-- InactiveLimit parameter is not enforced for RootOnly partitions.
-- Update select/cons_res web page (Susanne Balle, HP,
cons_res_doc_patch_3_29_06).
-- Build a "slurmd.test" along with slurmd. slurmd.test has the path to
slurmstepd set allowing it to run unmodified out of the builddir for
testing (Mark Grondona).
* Changes in SLURM 1.1.0-pre2
=============================
-- Added "bcast" command to transmit copies of a file to compute nodes
with message fanout.
-- Bluegene specific - Added support for overlapping partitions and
dynamic partitioning.
-- Bluegene specific - Added support for nodecard sized blocks.
-- Added logic to accept 1k for 1024 and so on for --nodes option of srun.
This logic is through display tools such as smap, sinfo, scontrol, and
squeue.
-- Added bluegene.conf man page.
-- Added support for memory affinity, see srun --mem_bind option.
* Changes in SLURM 1.1.0-pre1
=============================
-- New --enable-multiple-slurmd configure parameter to allow running
more than one copy of slurmd on a node at the same time. Only
really useful for developers.
-- New communication is now branched on all processes to slurmd's from
slurmctld and srun launch command. This is done with a tree type
algorithm. Spawn and batch mode work the same as before. New slurm.conf
variable TreeWidth=50 is default. This is the number of threads per
-- Configuration parameter HeartBeatInterval is depracated. Now used half
of SlurmdTimeout and SlurmctldTimeout for communications to slurmd and
slurmctld daemons repsectively.
-- Add hash tables for select/cons_res plugin (Susanne Balle, HP,
patch_02222006).
-- Remove some use of cr_enabled flag in slurmctld job record, use
new flag "test_only" in select_g_job_test() instead.
Christopher J. Morrone
committed
* Changes in SLURM 1.0.17
=========================
-- Set correct user groups for task epilogs.
-- Add more debugging for tracking slow slurmd job initiations
(slurm.hp.replaydebug.patch).
Christopher J. Morrone
committed
* Changes in SLURM 1.0.16
=========================
-- For "srun --attach=X" to other users job, report an error and exit (it
previously just hung).
-- Make sure that "scancel -s KILL" terminates the job just like "scancel"
including deletion of all job steps (Chris Holmes, HP, slurm,patch).
-- Recognize ISO-8859 input to srun as a script (for non-English scripts).
-- switch/elan: Fix bug in propagation of ELAN_STATKEY environment variable.
Christopher J. Morrone
committed
-- Fix bug in slurmstepd IO code that can result in it spinning if a
certain error occurs.
Christopher J. Morrone
committed
-- Remove nodes from srun's required node list if their count exceeds
the number of requested tasks.
-- sched/backfill to schedule around jobs that are hung in a completing
state.
-- Avoid possibly re-running the epilog for a job on slurmctld restart or
reconfig by saving and restoring a hostlist of nodes still completing
the job.
* Changes in SLURM 1.0.15
=========================
-- In srun, reset stdin to blocking mode (if it was originally blocking before
we set it to O_NONBLOCK) on exit to avoid trouble with things like running
srun under a bash shell in an emacs *shell* buffer.
-- Fix srun race condition that occasionally causes segfaults at shutdown
-- Fix obscure locking issues in log.c code.
-- Explicitly close IO related sockets. If an srun gets "stuck", possibly
because of unkillable tasks in its job step, it will not hold many TCP
sockets in the CLOSE_WAIT state.
-- Increase the SLURM protocol timeout from 5 seconds to 10 seconds.
(In 1.2 there will be a slurm.conf parameter for this, rather than having
it hardcoded.)
* Changes in SLURM 1.0.14
=========================
-- Fix for bad xfree() call in auth/munge which can raise an assert().
-- Fix installed fork handlers for the conf mutex for slurmd and slurmstepd.
* Changes in SLURM 1.0.13
=========================
-- Fix for AllowGroups option to work when the /etc/group file doesn't
contain all users in group by adding the uids of the names in /etc/passwd
that have a gid of that which we are looking for.
-- Fix bug in InactiveLimit support that can potentially purge active jobs.
NOTE: This is highly unlikely except on very large AIX clusters.
-- Fix bug for reiniting the config_lock around the control_file in
slurm_protocol_api.c logic has changed in 1.1 so no need to merge
* Changes in SLURM 1.0.12
=========================
-- Report node state of DRAIN rather than DOWN if DOWN with DRAIN flag set.
-- Initialize job->mail_type to 0 (NONE) for job submission.
-- Fix for stalled task stdout/stderr when buffered I/O is used, and
a single line exceeds 4096 bytes.
-- Memory leak fixes for maui plugin (hjcao@nudt.edu.cn)
Christopher J. Morrone
committed
-- Fix for spinning srun when the terminal to which srun is talking
goes away.
-- Don't set avail_node_bitmap for DRAINED nodes on slurmctld reconfig
(can schedule a job on drained node after reconfig).
Christopher J. Morrone
committed
* Changes in SLURM 1.0.11
=========================
-- Fix for slurmstepd hang when launching a task. (Needed to install
list library's atfork handlers).
-- Fix memory leak on AIX (and possibly other architectures) due to
missing pthread_attr_destroy() calls.
-- Fix rare task standard I/O setup bug. When the bug hit, stdin, stdout,
Christopher J. Morrone
committed
or stderr could be an invalid file descriptor.
-- General slurmstepd file descriptor cleanup.
-- Fix memory leak in job accounting logic (Andy Riebs, HP, memory_leak.patch).
Christopher J. Morrone
committed
* Changes in SLURM 1.0.10
=========================
-- Fix for job accounting logic submitted from Andy Riebs to handle issues
with suspending jobs and such. patch file named requeue.patch
-- Make select/cons_res interoperate with mpi/lam plugin for task counts.
-- Fix race condition where srun could seg-fault due to use of logging functions
within pthread after calling log_fini.
-- Code changes for clean build with gcc 2.96 (gcc_2_96.patch, Takao Hatazaki, HP).
-- Add CacheGroups configuration support in configurator.html (configurator.patch,
Takao Hatazaki, HP).
-- Fix bug preventing use of mpich-gm plugin (mpichgm.patch, Takao Hatazaki, HP).
* Changes in SLURM 1.0.9
========================
-- Fix job accounting logic to open new log file on slurmctld reconfig.
(Andy Riebs, slurm.hp.logfile.patch).
-- Fix bug which allows a user to run a batch script on a node not allocated
by the slurmctld.
-- Fix poe MP_HOSTFILE handling bug on AIX.
* Changes in SLURM 1.0.8
========================
-- Fix to communication between slurmd and slurmstepd to allow for partial
reads and writes on their communication pipes.
* Changes in SLURM 1.0.7
========================
-- Change in how AuthType=auth/dummy is handled for security testing.
-- Fix for bluegene systems to allow full system partitions to stay booted
when other jobs are submitted to the queue.
* Changes in SLURM 1.0.6
========================
-- Prevent slurmstepd from crashing when srun attaches to batch job.
* Changes in SLURM 1.0.5
========================
-- Restructure logic for scheduling BlueGene small block jobs. Added
"test_only" flag to select_p_job_test() in select plugin.
-- Correct squeue "NODELIST" output for BlueGene small block jobs.
-- Fix possible deadlock situations on BlueGene plugin on errors.
* Changes in SLURM 1.0.4
========================
-- Release job allocation if step creation fails (especially for BlueGene).
-- Fix bug select/bluegene warm start with changed bglblock layout.
-- Fix bug for queuing full-system BlueGene jobs.
* Changes in SLURM 1.0.3
========================
-- Fix bug that could refuse to queue batch jobs for BlueGene system.
-- Add BlueGene plugin mutex lock for reconfig.
-- Ignore BlueGene bgljobs in ERROR state (don't try to kill).
-- Fix job accounting for batch jobs (Andy Riebs, HP,
slurm.hp.jobacct_divby0a.patch).
-- Added proctrack/linuxproc.so to the main RPM.
-- Added mutex around bridge api file to avoid locking up the api.
-- BlueGene mod: Terminate slurm_prolog and slurm_epilog immediately if
SLURM_JOBID environment variable is invalid.
-- Federation driver: allow selection of a sepecific switch interface
(sni0, sni1, etc.) with -euidevice/MP_EUIDEVICE.
-- Return an error for "scontrol reconfig" if there is already one in
progress
* Changes in SLURM 1.0.2
========================
-- Correctly report DRAINED node state as type OTHER for "sinfo --summarize".
-- Fixes in sacct use of malloc (Andy Riebs, HP, sacct_malloc.patch).
-- Smap mods: eliminate screen flicker, fix window resize, report more clear
message if window too small (Dan Palermo, HP, patch.1.0.0.1.060126.smap).
-- Sacct mods for inconsistent records (race condition) and replace --debug
option with --verbose (Andy Riebs, HP, slurm.hp.sacct_exp_vvv.patch).
-- scancel of a job step will now send a job-step-completed message
to the controller after verifying that the step has completed on all nodes.
-- Fix task layout bug in srun.
-- Added times to node "Reason" field when set down for insufficient
resources or if not responding.
-- Validate operation with Elan switch and heterogeneous nodes.
* Changes in SLURM 1.0.1
========================
-- Assorted updates and clarifications in documentation.
-- Detect which munge installation to use 32/64 bit.
-- Fix sinfo filtering bug, especially "sinfo -R" output.
-- Fix node state change bug, resuming down or drained nodes.
-- Fix "scontrol show config" to display JobCredentialPrivateKey instead
of JobCredPrivateKey and JobCredentialPublicCertificate instead of
JobCredPublicKey. They now match the options in the slurm.conf.
-- Fix bug in job accounting for very long node list records (Andy Riebs,
HP, sacct_buf.patch).
-- BLUEGENE SPECIFIC - added load function to smap to load an already
exsistant bluegene.conf file.
-- Fix bug in sacct: If user requests specific job or job step ID,
only the last one with that ID will be reported. If multiple
nodes fail, the job has its state recorded as "JOB_TERMINATED...nf"
(Andy Riebs, HP, slurm.hp.sacct_dup.patch).
-- Fix some inconsistencies in sacct's help message (Andy Riebs, HP,
slurm.hp.sacct_help.patch).
-- Validate input to sacct command and allows embedded spaces in
arguments (Andy Riebs, HP, slurm.hp.sacct_validate.patch).
* Changes in SLURM 0.7.0-pre8
=============================
-- BGL specific -- bug fix for smap configure function down configuration
Christopher J. Morrone
committed
-- Add slurmd cache for group IDs (Takao Hatazaki, HP).
-- Fix bug in processing of "#SLURM" batch script option parsing.
* Changes in SLURM 0.7.0-pre7
=============================
-- Fix issue with NODE_STATE_COMPLETING, could start job on node before
epilog completed.
-- Added some infrastructure for job suspend/resume (scontrol, api, and
slurmctld stub).
-- Set job's num_procs to the actual processor count allocated to the job.
-- Fix bug in HAVE_FRONT_END support for cluster emulation.
* Changes in SLURM 0.7.0-pre6
=============================
-- Added support for task affinity for binding tasks to CPUs (Daniel
Palermo, HP).
-- Integrate task affinity support with configuration, add validation
test.
* Changes in SLURM 0.7.0-pre5
=============================
-- Enhanced performance and debugging for slurmctld reconfiguration.
-- Add "scontrol update Jobid=# Nice=#" support.
-- Basic slurmctld and tool functionality validated to 16k nodes.
-- squeue and smap now display correct info for jobs in bluegene enviornment.
-- Fix setting of SLURM_NODELIST for batch jobs.
-- Add SubmitTime to job information available for display.
-- API function slurm_confirm_allocation() has been marked OBSOLETE
and will go away in some future version of SLURM. Use
-- New API calls slurm_signal_job and slurm_signal_job_step to send
signals directly to the slurmds without triggering the shutdown sequence.
-- remove "uid" from old_job_alloc_msg_t, no longer needed.
-- Several bug fixes in maui scheduler plugin from Dave Jackon
(Cluster Resources).
* Changes in SLURM 0.7.0-pre4
=============================
-- Remove BNR libary functions and add those for PMI (KVS and basic
MPI-1 functions only for now)
-- Added Hostfile support for POE and srun. MP_HOSTFILE env var to set
location of hostfile. Tasks will run from list order in the file.
-- Removes the slurmd's use of SysV shared memory. Instead the slurmd
communicates with the slurmstepd processes through the slurmstepd's
new named unix domain socket. The "stepd_api" is used to talk to the
slurmstepd (src/slurmd/common/stepd_api.[ch]).
-- Bluegene specific - bluegene block allocator will find most any
partition size now. Added support to start at any point in smap
to request a partition instead of always starting at 000.
-- Bluegene specific - Support to smap to down or bring up nodes in
configure mode. Added commands include allup, alldown,
up [range], down [range]
-- Time format in sinfo/squeue/smap/sacct changed from D:HH:MM:SS to
D-HH:MM:SS per POSIX standards document.
-- Treat scontrol update request without any requested changes as an
error condition.
-- Bluegene plugin renamed with BG instead of BGL. partition_allocator moved
into bluegene plugin and renamed block_allocator. Format for bluegene.conf
file changed also. Read bluegene html page. Code is backwards compatable
smap will generate in new form
-- Add srun option --nice to give user some control over job priority.
* Changes in SLURM 0.7.0-pre3
=============================
-- Restructure node states: DRAINING and DRAINED states are replaced
with a DRAIN flag. COMPLETING state is changed to a COMPLETING flag.
-- Test suite moved into testsuite/expect from separate repository.
-- Added new document describing slurm APIs (doc/html/api.html).
-- Permit nodes to be in multiple partitions simultaneously.
* Changes in SLURM 0.7.0-pre2
=============================
-- New stdio protocol. Now srun has just a single TCP stream to each node
of a job-step. srun and slurmd comminicate over the TCP stream using a
simple messaging protocol.
-- Added task plugin and use task prolog/epilog(s).
-- New slurmd_step functionality added. Fork exec instead of using shared
memory. Not completely tested.
-- BGL small partition logic in place in plugin and smap. Scheduler needs
to be rewritten to handle multiple partitions on a single node. No
documentation written on process yet.
-- If running select/bluegene plugin without access to BGL DB2, then
full-system bglblock is of system size defined in bluegene.conf.
* Changes in SLURM 0.7.0-pre1
=============================
-- Support defered initiation of job (e.g. srun --begin=11:30 ...).
-- Add support for srun --cpus-per-task through task allocation in
slurmctld.
-- fixed partition_allocator to work without curses
-- made change to srun to start message thread before other threads
to make sure localtime doesn't interfere.
-- Added new RPCs for slurmctld REQUEST_TERMINATE_JOB or TASKS,
REQUEST_KILL_JOB/TASKS changed to REQUEST_SIGNAL_JOB/TASKS.
-- Add support for e-mail notification on job state changes.
-- Some infrastructure added for task launch controls (slurm.conf:
TaskProlog, TaskEpilog, TaskPlugin; srun --task-prolog, --task-epilog).
* Changes in SLURM 0.6.11
=========================
-- Fix bug in sinfo partition sorting order.
-- Fix bugs in srun use of #SLURM options in batch script.
-- Use full Elan credential space rather than re-using credentials as soon
as job step completes (helps with fault-tolerance).
* Changes in SLURM 0.6.10
=========================
-- Fix for slurmd job termination logic (could hang in COMPLETING state).
-- Sacct bug fixes: Report correct user name for job step, show "uid.gid"
as fifth field of job step record (Andy Riebs, slurm.hp.sacct_uid.patch).
-- Add job_id to maui scheduler plugin start job status message.
-- Fix for srun's handling of null characters in stdout or stderr.
-- Update job accounting for larger systems (Andy Riebs, uptodate.patch).
Christopher J. Morrone
committed
-- Fixes for proctrack/linuxproc and mpich-gm support (Takao Hatazaki, HP).
-- Fix bug in switch/elan for large task count job having irregular task
distribution across nodes.
* Changes in SLURM 0.6.9
========================
-- Fix bug in mpi plugin to set the ID correctly
-- Accounting bug causing segv fixed (Andy Riebs, 14oct.jobacct.patch)
-- Fix for failed launch of a debugged job (e.g. bad executable name).
-- Wiki plugin fix for tracking allocated nodes (Ernest Artiaga, BSC).
-- Fix memory leaks in slurmctld and federation plugin.
-- Fix sefault in federation plugin function fed_libstate_clear().
-- Align job accounting data (Andy Riebs, slurm.hp.unal_jobacct.patch)
-- Restore switch state in backup controller restarts
* Changes in SLURM 0.6.8
========================
-- Invalid AllowGroup value in slurm.conf to not cause seg fault.
-- Fix bug that would cause slurmctld to seg-fault with select/cons_res
and batch job containing more than one step.
Moe Jette
committed
* Changes in SLURM 0.6.7
========================
-- Make proctrack/linuxproc thread safe, could cause slurmd seg fault.
-- Propagate umask from srun to spawned tasks.
-- Fix problem in switch/elan error handling that could hang a slurmd
step manager process.
-- Build on AIX with -bmaxdata:0x70000000 for memory limit more than 256MB.
-- Restore srun's return code support.
Moe Jette
committed
Moe Jette
committed
* Changes in SLURM 0.6.6
========================
-- Fix for bad socket close() in the spawn-io code.
Moe Jette
committed
* Changes in SLURM 0.6.5
========================
-- Sacct to report on job steps that never actually started.
-- Added proctrack/rms to elan rpm.
-- Restructure slurmctld/agent.c logic to insure timely reaping of
terminating pthreads.
-- Srun not to hang if job fails before task launches not all completed.
Moe Jette
committed
-- Fix for consumable resources properly scheduling nodes that have more
nodes than configured (Susanne Balle, HP, cons_res_patch.10.14.2005)
Moe Jette
committed
* Changes in SLURM 0.6.4
========================
-- Bluegene plugin drains an entire bglblock on repeated boot failures
only if it has not identified a specific node as being bad.
* Changes in SLURM 0.6.3
========================
-- Fix slurmctld mem leaks (step name and hostlist struct).
-- Bluegene plugin sets end time for job terminated due to removed
bglblock.
* Changes in SLURM 0.6.2
========================
-- Fix sinfo and squeue formatting to properly handle slurm nodes,
jobs, and other names containing "%".
* Changes in SLURM 0.6.1
========================
-- Fixed smap -Db to display slurm partitions correctly (take 2).
-- Add srun fork() retry logic for very heavily loaded system.
-- Fix possible srun hang on task launch failure.
-- Add support for mvapich v0.9.4, 0.9.5 and gen2.
* Changes in SLURM 0.6.0
========================
-- Add documentation for ProctrackType=proctrack/rms.
-- Make proctrack/rms be the default for switch/elan.
-- Do not preceed SIGKILL or SIGTERM to job step with (non-requested) SIGCONT.
-- Fixed smap -Db to display slurm partitions correctly.
-- Explicitly disallow ProctrackType=proctrack/linuxproc with
SwitchType=switch/elan. They will not work properly together.
* Changes in SLURM 0.6.0-pre8
=============================
-- Remove debugging xassert in switch/federation that were accidentally
committed
-- Make slurmd step manager retry slurm_container_destroy() indefinitely
instead of giving up after 30 seconds. If something prevents a job
step's processes from being killed, the job will be stuck in the
completing until the container destroy succeeds.
* Changes in SLURM 0.6.0-pre7
=============================
-- Disable localtime_r() calls from forked processes (semaphore set
in another pthread can deadlock calls to localtime_r made from
the forked process, this will be properly fixed in the next
major release of SLURM).
-- Added SLURM_LOCALID environment variable for spawned tasks
(Dan Palermo, HP).
-- Modify switch logic to restore state based exclusively upon
recovered job steps (not state save file).
-- Gracefully refuse job if there are too many job steps in slurmd.
-- Fix race condition in job completion that can leave nodes in
COMPLETING state after job is COMPLETED.
-- Added frees for BGL BrigeAPI strdups that were to this point unknown.
-- smap scrolls correctly for BGL systems.
-- slurm_pid2jobid() API call will now return the jobid for a step
manager slurmd process.
* Changes in SLURM 0.6.0-pre6
=============================
-- Added logic to return scheduled nodes to Maui scheduler (David
Jackson, Cluster Resources)
-- Fix bug in handling job request with maximum node count.
-- Fix node selection scheduling bug with heterogeneous nodes and
srun --cpus-per-task option
-- Generate error file to note prolog failures.
* Changes in SLURM 0.6.0-pre5
=============================
-- Modify sfree (BGL command) so that --all option no longer requires
an argument.
-- Modify smap so it shows all nodes and partitions by default (even
nodes that the user can't access, otherwise there are holes in
its maps).
-- Added module to parse time string (src/common/parse_time.c) for
future use.
-- Fix BlueGene hostlist processing for non-rectangular prisms and
add string length checking.
-- Modify orphan batch job time calculation for BGL to account for
slowness when booting many bglblocks at the same time.
* Changes in SLURM 0.6.0-pre4
=============================
-- Added etc/slurm.epilog.clean to kill processes initiated outside of
slurm when a user's last job on a node terminates.
-- Added config.xml and configurator.html files for use by OSCAR.
-- Increased maximum job step count from 64 to 130 for BGL systems only.
Christopher J. Morrone
committed
=============================
-- Add code so job request for shared nodes gets explicitly requested
nodes, but lightly loaded nodes otherwise.
-- Add job step name field.
-- Add job step network specification field.
-- Add proctrack/rms plugin
-- Change the proctrack API to send a slurmd_job_t pointer to both
slurm_container_create() and slurm_container_add(). One of those
functions MUST set job->cont_id.
-- Remove vestigial node_use (virtual or coprocessor) field from job
request RPC.
-- Fix mpich-gm bugs, thanks to Takao Hatazaki (HP).
-- Fix code for clean build with gcc 2.96, Takao Hatazaki (HP).
-- Add node update state of "RESUME" to return DRAINED, DRAINING, or
DOWN node to service (IDLE or ALLOCATED state).
-- smap keeps trying to connect to slurmctld in iterative mode rather
than just aborting on failure.
-- Add squeue option --node to filter by node name.
-- Modify squeue --user option to accept not only user names, but also
user IDs.
* Changes in SLURM 0.6.0-pre2
=============================
-- Removed "make rpm" target.
Christopher J. Morrone
committed
* Changes in SLURM 0.6.0-pre1
=============================
-- Added bgl/partition_allocator/smap changes from 0.5.7.
-- Added configurable resource limit propagation (Daniel Christians, HP).
-- Changed SlurmUser ID from 16-bit to 32-bit.
-- Added MpiDefault slurm.conf parameter.
-- Remove KillTree configuration parameter (replace with
"ProctrackType=proctrack/linuxproc")
-- Remove MpichGmDirectSupport configuration parameter (replace with
"MpiDefault=mpich-gm")
-- Make default plugin be "none" for mpi.
-- Added mpi/none plugin and made it the default.
-- Replace extern program_invocation_short_name with program_invocation_name
due to short name being truncated to 16 bytes on some systems.
-- Added support for Elan clusters with different CPU counts on nodes
(Chris Holmes, HP).
-- Added Consumable Resources web page (Susanne Balle, HP).
-- "Session manager" slurmd process has been eliminated.
-- switch/federation fixes migrated from 0.5.*
-- srun pthreads really set detached, fixes scaling problem
-- srun spawns message handler process so it can now be stopped (via
Ctrl-Z or TotalView) without inducing failures.
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
* Changes in SLURM 0.5.7
========================
-- added infrastructure for (eventual) support of AIX checkpointing
of slurm batch and interactive poe jobs
-- added wiring for BGL to do wiring for physical location first and then
logical.
-- only one thread used to query database before polling thread is there.
* Changes in SLURM 0.5.6
========================
-- fix for BGL hostnames and full system partition finding
* Changes in SLURM 0.5.5
========================
-- Increase SLURM_MESSAGE_TIMEOUT_MSEC_STATIC to 15000
-- Fix for premature timeout in _slurm_send_timeout
-- Fix for federation overlapping calls to non-thread-safe _get_adapters
* Changes in SLURM 0.5.4
========================
-- Added support for no reboot for VN to CO on BGL
-- Fix for if a job starts after it finishes on BGL
* Changes in SLURM 0.5.3
========================
-- federation patch so the slurm controller has sane window status at
start-up regardless of the window status reported in the slurmd
registration.
-- federation driver exits with fatal() if the federation driver can not
find all of the adapters listed in the federation.conf
* Changes in SLURM 0.5.2
========================
-- Extra federation driver sanity checks
* Changes in SLURM 0.5.1
========================
-- Fix federation driver bad free(), other minor fed fixes
-- Allow slurm to parse very long lines in the slurm.conf
* Changes in SLURM 0.5.0
========================
-- Fix race condition in job accouting plugin, could hang slurmd
-- Report SlurmUser id over 16 bits as an error (fix on v0.6)
* Changes in SLURM 0.5.0-pre19
==============================
-- Fix memory management bug in federation driver
* Changes in SLURM 0.5.0-pre18
==============================
-- elan switch plugin memory leak plugged
-- added g_slurmctld_jobacct_fini() to release all memory (useful
to confirm no memory leaks)
-- Fix slurmd bug introduced in pre17
* Changes in SLURM 0.5.0-pre17
==============================
-- slurmd calls the proctrack destroy function at job step completion
-- federation driver tries harder to clean up switch windows
Christopher J. Morrone
committed
* Changes in SLURM 0.5.0-pre16
==============================
-- Check slurm.conf values for under/overflows (some are 16 bit values).
Christopher J. Morrone
committed
-- Federation driver clears windows at job step completion
-- Modify code for clean build with gcc v4.0
Christopher J. Morrone
committed
-- New SLURM_NETWORK environmant variable used by slurm_ll_api
Christopher J. Morrone
committed
* Changes in SLURM 0.5.0-pre15
==============================
-- Added "network" field to "scontrol show job" output.
-- Federation fix for unfreed windows when multiple adapters on
one node use the same LID
* Changes in SLURM 0.5.0-pre14
==============================
-- RDMA works on fed plugin.
* Changes in SLURM 0.5.0-pre13
==============================
-- Major mods to support checkpoint on AIX.
-- Job accounting documenation expanded, added tuning options, minor bug fixes
-- BGL wiring will now work on <= 4 node X-dim partitions and also 8 node
X-dim partitions.
-- ENV variables set for spawning jobs.
-- jobacct patch from HP to not erroneously lock a mutex in the
jobacct_log plugin.
-- switch/federation supports multiple adapters per task. sn_all behaviour
is now correct, and it also supports sn_single.
* Changes in SLURM 0.5.0-pre12
==============================
-- Minor build changes to support RPM creation on AIX
* Changes in SLURM 0.5.0-pre11
==============================
-- Slurmd tests for initialized session manager (user's) slurmd pid before
killing it to avoid killing system daemon (race condition).
-- srun --output or --error file names of "none" mapped to /dev/null for
batch jobs rather than a file actually named "none".
-- BGL: don't try to read bglblock state until they are all created to
avoid having BGL Bridge API seg fault.
* Changes in SLURM 0.5.0-pre10
==============================
-- Fix bug that was resetting BGL job geometry on unrelated field update.
-- squeue and sinfo print timestamp in interate mode by default.
-- added scrolling windows in smap
-- introduced new variable to start polling thread in the bluegene plugin.
-- Latest accounting patches from Riebs/HP, retry communications.
-- Added srun option --kill-on-bad-exit from Holmes/HP.
-- Support large (64-bit address) log files where possible.
-- Fix problem of signals being delivered twice to tasks. Note that as
part of the fix the slurmd session manger no longer calls setsid to
create a new session.
* Changes in SLURM 0.5.0-pre9
=============================
-- If a job and node are in COMPLETING state and slurmd stops responding for
SlurmdTimeout, then set the node DOWN and the job COMPLETED.
-- Add logic to switch/elan to track contexts allocated to active job steps
rather than just using a cyclic counter and hoping to avoid collisions.
-- Plug memory leak in freeing job info retrieved using API.
-- Bluegene Plugin handles long deallocating states from driver 202.
-- Fix bug in bitfmt2int() which can go off allocated memory.
* Changes in SLURM 0.5.0-pre8
=============================
-- BlueGene srun --geometry was not getting propogated properly.
-- Fix race condition with multiple simultaneous epilogs.
-- Modify slurmd to resend job completion RPC to slurmctld in the
case where slurmctld is not responding.
-- Updated sacct: handle cancelled jobs correctly, add user/group
output, add ntasks ans synonym for nprocs, display error field
by default, display ncpus instead of nprocs
-- Parallelization of queing jobs up to 32 at once. Variable
MAX_AGENT_COUNT used in bgl_job_run.c to specify.
* Changes in SLURM 0.5.0-pre7
=============================
-- Preserve next_job_id across restarts.
-- Add support for really long job names (256 bytes).
-- Add configuration parameter SchedulerRootFilter to control what
entity manages prioritization of jobs in RootOnly partition
(internal scheduler plugin or external entity).
-- Added support for job accounting.
-- Added support for consumable resource based node scheduling.
-- Permit batch job to be launched to re-existing allocation.
* Changes in SLURM 0.5.0-pre6
=============================
-- Load bluegene.conf and federation.conf based upon SLURM_CONF env
var (if set).
-- Fix slurmd shutdown signal synchronization bug (not consistently
terminating).
-- Add doc/html/ibm.html document. Update bluegene.html.
-- Remove geometry[SYSTEM_DIMENSIONS] from opaque node_select data
type if SYSTEM_DIMENSIONS==0 (not ASCI-C compliant).
-- Modify smap to test for valid libdb2.so before issuing any BGL
Bridge API calls.
-- Modify spec file for optional inclusion of select_bluegene and
sched_wiki plugin libraries.
-- Initialize job->network in data structure, could cause job
submit/update to fail depending upon what is left on stack.
* Changes in SLURM 0.5.0-pre5
=============================
-- Expand buffer to hold node_select info in job termination log.
-- Modify slurmctld node hashing function to reduce collisions.
-- Treat bglblock vanishing as fatal error for job, prolog and epilog
exit immediately.
* Changes in SLURM 0.5.0-pre4
=============================
-- Fix bug in slurmd that could double KillWait time on job timeout.
-- Fix bug in srun's error code reporting to slurmctld, could DOWN
a node if job run as root has non-zero error code.
-- Remove a node's partition info when removed from existing partition.
-- Use proctrack plugin to call all processes in a job step before
calling interconnect_postfini() to insure no processes escape from
job and prevent switch windows from being released.
-- Added mail.html web page telling how to get on slurm mailing lists.
-- Added another directory to search for DB2 files on BGL system.
-- Added overview man page slurm.1.
-- Added new configure option "--with-db2-dir=PATH" for BGL.
* Changes in SLURM 0.5.0-pre3
=============================
-- Merge of SLURM v0.4-branch into v0.5/HEAD.
* Changes in SLURM 0.5.0-pre2
=============================
-- Fix bug in srun to clean-up upon failure of an allocated node
(srun -A would generate a segmentation fault, Chris Holmes, HP).
-- If slurmd's node name is mapped to NULL (due to bad configuration)
terminate slurmd with a fatal error and don't crash slurmctld.
-- Add SLURMD_DEBUG env var for use with AIX/POE in spawn_task RPC.
-- Always pack job's "features" for access by prolog/epilog
* Changes in SLURM 0.5.0-pre1
=============================
-- Add network option to srun and job creation API for specification
of communication protocol over IBM Federation switch.
-- Add new slurm.conf parameter ProctrackType (process tracking) and
associated plugin in the slurmd module.
-- Send node's switch state with job epilog completion RPC and
node registration (only when slurmd starts, not on periodic
registrtions).
-- Add federation switch plugin.
-- Add new configuration keyword, SchedulerRootFilter, to control
external scheduler control of RoolOnly partition (Chris Holmes, HP).
-- Modify logic to set process group ID for spawned processes (last
patch from slurm v0.3.11).
Moe Jette
committed
-- "srun -A" modified to return exit code of last command executed
(Chris Holmes, HP).
-- Add support for different slurm.conf files controlled via SLURM_CONF
env var (Brian O'Sullivan, pathscale)
-- Fix bug if srun given --uid without --gid option (Chris Holmes, HP).
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
* Changes in SLURM 0.4.24
=========================
-- DRAIN nodes with switches on base partitions are in ERROR, MISSING,
or DOWN states.
* Changes in SLURM 0.4.23
=========================
-- Modified bluegene plugin to only sync bglblocks to jobs on initial
startup, not on reconfig. Fixes race condition.
-- Modified bluegene plugin to work with 141 driver. Enabling it to
only have to reboot when switching from coproc -> virtual and back.
-- added support for a full system partition to make sure every other
partition is free and vice-verse.
-- smap resizing issue fixed.
-- change prolog not to add time when a partition is in deallocating
state.
-- NOTE: This version of SLURM requires BGL driver 141/2005.
* Changes in SLURM 0.4.22
=========================
-- Modified bluegene plugin to not do anything if the bluegene.conf file
is altered.
-- added checking for lists before trying to create iterator on the list.
* Changes in SLURM 0.4.21
=========================
-- Fix in race condition with time in Status Thread of BGL
-- Fix no leading zeros in smap output.
* Changes in SLURM 0.4.20
=========================
-- Smap output is more user friendly with -c option
* Changes in SLURM 0.4.19
=========================
-- Added new RPCs for getting bglblock state info remotely and cache data
within the plugin (permits removal of DB2 access from BGL FEN and
dramatically increases smap responsivenss, also changed prolog/epilog
operation)
-- Move smap executable to main slurm RPM (from separate RPM).
-- smap uses RPC instead of DB2 to get info about bgl partitions.
-- Status function added to bluegene_agent thread. Keeps current state
of BGL partitions updating every second. will handle multiple attempts
at booting if booting a partition fails.
* Changes in SLURM 0.4.18
=========================
-- Added error checking of rm_remove_partition calls.
-- job_term() was terminating a job in real time rather than
queueing the request. This would result in slurmctld hanging
for many seconds when a job termination was required.
* Changes in SLURM 0.4.17
========================
-- Bug fixes from testing .16.
* Changes in SLURM 0.4.16
========================
-- Added error checking to a bunch of Bridge API calls and more
gracefully handle failure modes.
-- Made smap more robust for more jobs.
* Changes in SLURM 0.4.15
========================
-- Added error checking to a bunch of Bridge API calls and more
gracefully handle failure modes.
* Changes in SLURM 0.4.14
========================
-- job state is kept on warm start of slurm
* Changes in SLURM 0.4.13
========================
-- epilog fix for bgl plugin
* Changes in SLURM 0.4.12
========================
-- bug shot for new api calls.
-- added BridgeAPILogFile as an option for bluegene.conf file
* Changes in SLURM 0.4.11
========================
-- changed as many rm_get_partition() to rm_get_partitions_info as we could
for time saving.
* Changes in SLURM 0.4.10
========================
-- redesign for BGL external wiring.
-- smap display bug fix for smaller systems.
* Changes in SLURM 0.4.9
========================
-- setpnum works now, have to include this in bluegene.conf
* Changes in SLURM 0.4.8
========================
-- Changed the prolog and the epilog to use the env var MPIRUN_PARTITION
instead of BGL_PARTITION_ID
* Changes in SLURM 0.4.7
========================
-- Remove some BGL specific headers that IBM now distributes, NOTE
BGL driver 080 or greater required.
-- Change autogen.sh to deal with problems running autoconf on one
system and configure on another with different software versions.
-- took tv.h out of partition_allocator so it would work withn driver 080
from IBM.
-- updated slurmd signal handling to prevent possible user killing of daemon.
* Changes in SLURM 0.4.5
========================
-- Change sinfo default time limit field to have 10 bytes (up from 9).
-- Fix bug in bluegene partition selection (sorting bug).
-- Don't display any completed jobs in smap.
-- Add NodeCnt to filetxt job completion plugin.
-- Minor restructuring of how MMCS is polled for DOWN nodes and switches.
-- Fix squeue output format for "%s" (node select data).
-- Queue job requesting more resources than exist in a partition if
that partition's state is DOWN (rather than just abort it).
-- Add prolog/epilog for bluegene to code base (moved from mpirun in CVS)
-- Add prolog, epilog and bluegene.conf.example to bluegene RPM
-- In smap, Admin can get the Rack/midplane id from an XYZ input and vice versa.
-- Add smap line-oriented output capability.
* Changes in SLURM 0.4.4
========================
-- Fix race condition in slurmd seting pgid of spawned tasks for
process tracking.
-- Fix scontrol reconfig does nothing to running jobs nor crash the system
-- Fix sort of bgl_list only happens once in select_bluegene.c instead of every
time a new job is inserted.
* Changes in SLURM 0.4.3
========================
-- Turn off some RPM build checks (bug in RPM, see slurm.spec.in)
-- starting slurmctrld will destroy all RMP*** partitions everytime.
* Changes in SLURM 0.4.2
========================
-- Fix memory leak in BlueGene plugin.
-- Srun's --test-only option takes precedence over --batch option.
-- Add sleep(1) after setting bglblock owner due to apparent race condition
in the BGL API.
-- Slurm was timing out and killing batch jobs if the node registered when
a job prolog was still running.
-- BlueGene plugin kills jobs running in defunct bglblock on restart.
-- Smap displays pending jobs now, in addition to running and completing jobs.
-- Remove node "use=" from bluegene.conf file, create both coprocessor and
virtual bglblocks for now (later create just one and use API to change
it when such an API is available).
-- Add "ChangeNumpsets" parameter to bluegene.conf to use script to
update the numpsets parameter for newly created bglblocks (to be
removed once the API functions).
-- Add all patches from slurm v0.3.11 (through 2/7/2005)
- Added srun option --disable-status,-X to disable srun status feature
and instead forward SIGINT immediately to job upon receipt of Ctrl-C.
- Fix for bogus slurmd error message "Unable to put task N into pgrp..."
- Fix case where slurmd may erroneously detect shared memory entry
as "stale" and delete entry for unkillable or slow-to-exit job.
- (qsnet) Fix for running slurmd on node without and elan3 adapter.
- Fix for reported problem: slurm/538: user tasks block writing to stdio
-- Minor tweak to init.d/slurm for BlueGene systems.
-- Added smap RPM package (to install binary built on BlueGene
service node on front-end nodes).
-- Added wait between bglblock destroy and creation of new blocks
so that MMCS can complete the operation.
-- Fix bug in synchronizing bglblock owners on slurmctld restart.
* Changes in SLURM 0.4.0-pre11
==============================
-- Add new srun option "--test-only" for testing slurm_job_will_run API.
-- Fix bugs in slurm_job_will_run() processing.
-- Change slurm_job_will_run() to not return a message, just an error code.
-- Sync partition owners with running jobs on slurmctld restart.
* Changes in SLURM 0.4.0-pre10
==============================
-- Specify number of I/O nodes associated with BlueGene partition.
-- Do not launch a job's tasks if the job is cancelled while its
prolog is running (which can be slow on BlueGene).
-- Add new error code, ESLURM_BATCH_ONLY for attepts to launch
job steps on front-end system (e.g. Blue Gene).
-- Assorted fixes in smap, partition creation mode.
-- Add proper support for "srun -n" option on BGL recognizing
processor count in both virual and coprocessor modes.
-- Make default node_use on Blue Gene be coprocessor, as documented.
-- Add SIGKILL to BlueGene jobs as part of cleanup.
* Changes in SLURM 0.4.0-pre9
=============================
-- Change in /etc/init.d/slurm for RedHat and Suze compatability
* Changes in SLURM 0.4.0-pre8
=============================
-- Add logic to create and destroy Bluegene Blocks automatically as needed.
-- Update smap man page to include Bluegene configuration commands.
* Changes in SLURM 0.4.0-pre7
=============================
-- Port all patches from slurm v0.3 up through v0.3.10:
- Remove calls in auth/munge plugin deprecated by munge-0.4.
- Allow single task id to be selected with --input, --output, and --error.
- Create shared memory segment for Elan statistics when using the
switch/elan plugin.
- More fixes necessary for TotalView.
* Changes in SLURM 0.4.0-pre6
=============================
-- Add new job reason value "JobHeld" for jobs with priority==0
-- Move startup script from "/etc/rc.d/init.d/slurm" to "/etc/init.d/slurm"
-- Modify prolog/epilog logic in slurmd to accomodate very long run times,
on BGL these scripts wait for events that can take a very long time
(tens of seconds).
-- This code base was used for BGLb acceptance test with pre-defined
BGL blocks.
* Changes in SLURM 0.4.0-pre5
=============================
-- select/bluegene plugin confirms db.properties file in $sysconfdir
and copies it to StateSaveLocation (slurmctld's working directory)
-- select/bluegene plugin confirms environment variable required for
DB2 interaction are set (execute "db2profile" script before slurmctld)
-- slurmd to always give jobs KillWait time between SIGTERM and SIGKILL
at termination
-- set job's start_time and end_time = now rather than leaving zero if
they fail to execute
-- enable select/bluegene testing for DOWN nodes and switches
-- select/bluegene plugin to delete orphan jobs, free BGLblocks and
set owner as jobs terminate/start
* Changes in SLURM 0.4.0-pre4
=============================
-- Fixes for reported problems:
- slurm/512: Let job steps run on DRAINING nodes
- slurm/513: Gracefully deal with UIDs missing from passwd file
-- Add support for MPICH-GM (from takao.hatazaki@hp.com)
-- Add support for NodeHostname in node configuration
-- Make "scontrol show daemons" function properly on front-end system
(e.g. Blue Gene)
-- Fix srun bug when --input, --output and --error are all "none"
-- Don't schedule jobs for user root if partition is DOWN
-- Modify select/bluegene to honor job's required node list
-- Modify user name logic to explicitly set UID=0 to "root",
Suse Linux was not handling multiple users with UID=0 well.
* Changes in SLURM 0.4.0-pre3
=============================
-- Send SIGTERM to batch script before SIGKILL for mpirun cleanup on
Blue Gene/L
-- Create new allocation as needed for debugger in case old allocation
has been purged
-- Add Blue Gene User Guide to html documents
-- Fix srun bug that could cause seg fault with --no-shell option if not
running under a debugger
-- Propogate job's task count (if set) for batch job via SLURM_NPROCS.
-- Add new job parameters for Blue Gene: geometry, rotate, mode (virtual
or co-processor), communications type (mesh or torus), and partition ID.
-- Exercise a bunch of new switch plugin functions for Federation
switch support.
-- Fix bug in scheduling jobs when a processor count is specified
and FastSchedule=0 and the cluster is heterogeneous.
* Changes in SLURM 0.4.0-pre2
=============================
-- NOTE: "startclean" when transitioning from version 0.4.0-pre1, JOBS ARE LOST
-- Fixes for reported problems:
- slurm/477: Signal of batch job script (scancel -b) fixed
- slurm/481: Permit clearing of AllowGroups field for a partition
- slurm/482: Adjust Elan base context number to match RMS range
- slurm/489: Job completion logger was writing NULL to text file
-- Preserve job's requested processor count info after job is initiated
(for viewing by squeue and scontrol)
-- srun cancels created job if job step creation fails
-- Added a lots of Blue Gene/L support logic: slurmd executes on a single
node to front-end the 512-CPU base-partitions (Blue Gene/L's nodes)
-- Add node selection plugin infrastructure, relocate existing logic
to select/linear, add configuration parameter SelectType
-- Modify node hashing algorithm for better performance on Blue Gene/L
-- Add ability to specify node ranges for 3-D rectangular prism
* Changes in SLURM 0.4.0-pre1
=============================
-- NOTE: "startclean" when transitioning from version 0.3, JOBS ARE LOST
-- Added support for job account information (arbitrary string)
-- Added support for job dependencies (start job X after job Y completes)
-- Added support for configuration parameter CheckpointType
-- Added new job state "CANCELLED"
-- Don't strip binaries, breaks parallel debuggers
-- Fix bug in Munge authentication retry logic
-- Change srun handling of interupts to work properly with TotalView
-- Added "reason" field to job info showing why a job is waiting to run
* Changes in SLURM 0.3.7
========================
-- Fixes required for TotalView operability under RHEL3.0
(Reported by Dong Ahn <dahn@llnl.gov>)
- Do not create detached threads when running under parallel debugger.
- Handle EINTR from sigwait().
* Changes in SLURM 0.3.6
========================
-- Fixes for reported problems:
- slurm/459: Properly support partition's "Shared=force" configuration.
-- Resync node state to DRAINED or DRAINING on restart in case job
and node state recovered are out of sync.
-- Added jobcomp/script plugin (execute script on job completion,
from Nathan Huff, North Dakota State University).
-- Added new error code ESLURM_FRAGMENTED for immediate resource
allocation requests which are refused due to completing job (formerly
returned ESLURM_NOT_TOP_PRIORITY)
-- Modified job completion logging plugin calling sequence.
-- Added much of the infrastructure required for system checkpoint
(APIs, RPCs, and NULL plugin)
* Changes in SLURM 0.3.5
========================
-- Fix "SLURM_RLIMIT_* not found in environment" error message when
distributing large rlimit to jobs.
-- Add support for slurm_spawn() and associated APIs (needed for IBM
SP systems).
-- Fix bug in update of node state to DRAINING/DRAINED when update
request occurs prior to initial node registration.
-- Fix bug in purging of batch jobs (active batch jobs were being
improperly purged starting in version 0.3.0).
-- When updating a node state to DRAINING/DRAINED a Reason must be
provided. The user name and a timestamp will automatically be
appended to that Reason.
* Changes in SLURM 0.3.4
========================
-- Fixes for reported problems:
- slurm/404: Explicitly set pthread stack size to 1MB for srun
-- Allow srun to respond to ctrl-c and kill queued job while waiting
for allocation from controller.
* Changes in SLURM 0.3.3
========================
-- Fix slurmctld handling of heterogeneous processor count on elan
switch (was setting DRAINED nodes in state DRAINING).
-- Fix sinfo -R, --list-reasons to list all relevant node states.
-- Fix slurmctld to honor srun's node configuration specifications
with FastSchedule==0 configuration.
-- Added srun option --debugger-test to confirm that slurm's debugger
infrastructure is operational.
-- Removed debugging hacks for srun.wrapper.c. Temporarily use
RPM's debugedit utility if available for similar effect.
* Changes in SLURM 0.3.2
-- The srun command wakes immeditely upon resource allocation (via new RPC)
rather than polling.
-- SLURM daemons log current version number at startup.
-- If slurmd can't respond to ping (e.g. paging is keeping it from
responding in a timely fashion) then send a registration RPC
-- Fix slurmd -M option to call mlockall() after daemonizing.
-- Add "slurm_" prefix to slurm's hostlist_ function man pages.
-- More AIX support added.
-- Change get info calls from using show_all to more general show_flags
with #define for SHOW_ALL flag.
========================
-- Set SLURM_TASKS_PER_NODE env var for batch jobs (and LAM/MPI).
-- Fix for slurmd spinning when stdin buffers full (gnats:434)
-- Change some slurmctld malloc sizes to reduce demand for realloc calls,
improves performance and eliminates realloc failure on RH EL3 under
extremely heavy workload apparently due to memory fragmentation.
-- Fix scheduling logic for heterogeneous processor count.
-- Modify security_2_2 test to function with release 0.3
-- Fix broken rpm build when libslurm not already installed.
-- New slurmd option -M to mlock() slurmd process into memory.
-- New srun option --no-shell causes srun to exit instead of spawning
shell when using --allocate, -A.
-- Modify srun --uid=user and --gid=group options to maintain invoking
user's credentials until after nodes have been allocated to requested
user/group (allows root to run jobs and allocate nodes for other users
in a RootOnly partition).
-- Fix node processing if state change requested via scontrol prior to
initial node registration.
* Changes in SLURM 0.3.0
========================
-- Support for AIX added (a few bugs do remain).
-- Fix memory leak in slurmctld, slurm_cred_create().
-- On ELF systems, export BNR_* functions from SLURM API.
-- Add support for "hidden" partitions (applies to their
nodes, jobs, and job steps as well). APIs and commands
modified to optionally display hidden partitions.
-- Modify partition's group_allow test to be based upon the user
of the allocation rather than the user making the allocation
request (user root for LCRM batch jobs).
-- Restructure plugin directory structure.
-- New --core=type option in srun for lightweight corefile support.
(requires liblwcf).
-- Let user root and SlurmUser exceed any partition limits.
-- Srun treats "--time=0" as a request for an infinite time limit.
* Changes in SLURM 0.3.0.0-pre10
-- Fix bugs in support of slurmctld "-f" option (specify different
slurm.conf pathname).
-- Remove slurmd "-f" option.
-- Several documenation changes for slurm administrators.
-- On ELF systems, export only slurm_* functions from slurm API and
ensure plugins use only slurm_ prefixed functions (created aliases
where necessary).
-- New srun option -Q, --quiet to suppress informational messages.
-- Fix bug in slurmctld's building of nodelist for job (failed if
more than one numeric field in node name).
-- Change "scontrol completing" and "sinfo" to use job's node bitmap
to identify nodes associated with that particular job that are
still processing job completion. This will work properly for
shared nodes.
-- Set SLURM_DISTRIBUTION environment varible for user tasks.
-- Fix for file descriptor leak in slurmd.
-- Propagate stacksize limit to jobs along with other resource limits
that were previously ignored.
===============================
-- Restructure how slurmctld state saves are performed for better
scalability.
-- New sinfo option "--list-reason" or "-R". Displays down or drained
nodes along with their REASON field.
* Changes in SLURM 0.3.0.0-pre8
-- Queue outgoing message traffic rather than immediately spawning
pthreads (under heavy load this resulted in hundreds of pthreads
using more memory than was available).
-- Restructure slurmctld message agent for higher throughput.
-- Add new sinfo options --responding and --dead (i.e. non-responding)
for filtering node states.
-- Fix bug in sinfo to properly process specified state filter including
"*" suffix for non-responding nodes.
-- Create StateSaveLocation directory if changes via slurmctld reconfig
-- Fixes for reported problems:
- slurm/381: Hold jobs requesting more resources than partition limit.
- slurm/387: Jobs lost and nodes DOWN on slurmctld restart.
-- Add support for getting node's real memory size on AIX.
-- Sinfo sort partitions in slurm.conf order, new sort option ("#P").
-- Document how to gracefully change plugin values.
-- Slurmctld does not attempt to recover jobs when the switch plugin
value changes (decision reached when any job's switch state recovery
fails).
-- Node does not transition from COMPLETING to DOWN state due to
not responding. Wait for tasks to complete or admin to set DOWN.
-- Always chmod SlurmdSpoolDir to 755 (a umask of 007 was resulting
-- Return errors when trying to change configuration parameters
AuthType, SchedulerType, and SwitchType via "scontrol reconfig"
or SIGHUP. Document how to safely change these parameters.
-- Plugin-specific error number definitions and descriptive strings
moved from common into plugin modules.
-- Documentation for writing scheduler, switch, and job completion
logging plugins added.
-- Added job and node state descriptions to the squeue and sinfo man pages.
-- Backup slurmctld to generate core file on SIGABRT.
-- Backup slurmctld to re-read slurm.conf on SIGHUP.
-- Added -q,--quit-on-interrupt option to srun.
-- Elan switch plugin now starts neterr resolver thread on all Elan3
systems (QsNet and QsNetII).
-- Added some missing read locks for references for slurmctld's
configuration data structure
-- Modify processing of queued slurmctld message traffic to get better
throughput (resulted in job inactivity limit being reached improperly
when hundreds of jobs running simultaneously)
===============================
-- Fixes for reported problems:
- slurm/372: job state descriptions added to squeue man page
-- Switch plugin added. Add "SwitchType=switch/elan" to slurm.conf for
systems with Quadrics Elan3 or Elan4 switches.
-- Don't treat DOWN nodes with too few CPUs as a fatal error on Elan
-- Major re-write of html documents
-- Updates to node pinging for large numbers of unresponsive nodes
-- Explicitly set default action for SIGTERM (action on Thunder was
to ignore SIGTERM)
-- Sinfo "--exact" option only applies to fields actually displayed
-- Partition processor count not correctly computed for heterogeneous
clusters with FastSchedule=0 configuration
-- Only return DOWN nodes to service if the reason for them being in
that state is non-responsiveness and "ReturnToService=1" configuration
-- Partition processor count now correctly computed for heterogeneous
clusters with FastSchedule configured off
-- New macros and function to export SLURM version number
* Changes in SLURM 0.3.0.0-pre5
===============================
-- Fixes for reported problems:
- slurm/346: Support multiple colon-separated PluginDir values
-- Fix node state transition: DOWN to DRAINED (instead of DRAINING)
-- Fix a couple of minor slurmctld memory leaks
* Changes in SLURM 0.3.0.0-pre4
===============================
-- Fix bug where early launch failures (such as invalid UID/GID) resulted
in jobs not terminating properly.
-- Initial support for BNR committed (not yet functional).
-- QsNet: SLURM now uses /etc/elanhosts exclusively for converting
hostnames to ElanIDs.
* Changes in SLURM 0.3.0.0-pre3
===============================
-- Fixes for reported problems:
- slurm/328: Slurmd was restarting with a new shared memory segment and
losing track of jobs
- slurm/329: Job processing may be left running when one task dies
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
- slurm/333: Slurmd fails to launch a job and deletes a step, due to
a race condition in shared memory management
- slurm/334: Slurmd was getting a segv due to a race condition in shared
memory management
- slurm/342: Properly handle nodes being removed from configuration
even when there are partitions, nodes, or job steps still associated
with them
-- Srun properly terminates jobs/steps upon node failure (used to hang
waiting for I/O completion)
-- Job time limits enforced even if InactiveLimit configured as zero
-- Support the sending of an arbitrary signal to a batch script (but not
the processses in its job steps)
-- Re-read slurm configuration file whenever changed, needed by users
of SLURM APIs
-- Scancel was generating a assert failure
-- Slurmctld sends a launch response message upon scheduling of a queued
job (for immediate srun response)
-- Maui scheduler plugin added
-- Backfill scheduler plugin added
-- Batch scripts can now have arguments that are propogated
-- MPICH support added (via patch, not in SLURM CVS)
-- New SLURM environment variables added SLMR_CPUS_ON_NODE and
SLURM_LAUNCH_NODE_IPADDR, these provide support needed for LAM/MPI
(version 7.0.4+)
-- The TMPDIR directory is created as needed before job launch
-- Do not create duplicate SLURM environment variables with the same name
-- Insure proper enforcement of node sharing by job
-- Treat lack of SpoolDir or StateSaveDir as a fatal error
-- Quickstart.html guide expanded
-- Increase maximum jobs steps per node from 16 to 64
-- Delete correct shared memory segment on slurmd -c (clean start)
* Changes in SLURM 0.3.0.0-pre2
===============================
-- Fixes for reported problems:
- slurm/326: Properly clean-up jobs terminating on non-responding nodes
-- Move all configuration data structure into common/read_config, scontrol
now always shows default values if not specified in slurm.conf file
-- Remove the unused "Prioritize" configuration parameter
* Changes in SLURM 0.3.0.0-pre1
===============================
- slurm/252: "jobs left orphaned when using TotalView:" SLURM controller
now pings srun and kills defunct jobs.
- slurm/253: "srun fails to accept new IO connection."
- slurm/317: "Lack of default partition in config file causes errors."
- slurm/319: Socket errors on multiple simultaneous job launches fixed
- slurm/321: slurmd shared memory synchronization error.
-- Removed slurm_tv_clean daemon which has been obsoleted by slurm/252 fix.
-- New scontrol command ``delete'' and RPC added to delete a partition
-- Squeue can now print and sort by group id/name
-- Scancel has new option -q,--quiet to not report an error if a job
-- Add the excluded node list to job information reported.
-- RPC version mis-match now properly handled
-- New job completion plugin interface added for logging completed jobs.
-- Fixed lost digit in scontrol job priority specification.
-- Remove restriction in the number of consecutive node sets (no longer
needed after DPCS upgrade)
-- Incomplete state save write now properly handled.
-- Modified slurmd setrlimit error for greater clarity.
-- Slurmctld performs load-leveling across shared nodes.
-- New user function added slurm_get_end_time for user jobs.
-- Always compile srun with stabs debug section when TotalView support
is requested.
* Changes in SLURM 0.2.21
=========================
-- Fixes for reported problems:
- slurm/253: Try using different port if connect() fails (was rarely
failing when an existing defunct connection was in TIME_WAIT state)
- slurm/300: Possibly killing wrong job on slurmd restart
- slurm/312: Freeing non-allocated memory and killing slurmd
-- Assorted changes to support RedHat Enterprise Linux 3.0 and IA64
-- Initial Elan4 and libelanctrl support (--with-elan).
-- Slurmctld was sometimes inappropriately setting a job's priority
to 1 when a node was down (even if up nodes could be used for the
job when a running job completes)
-- Convert all user commands from use of popt library to getopt_long()
-- If TotalView support is requested, srun exports "totalview_jobid"
variable for `%J' expansion in TV bulk launch string.
-- Fix several locking bugs in slurmd IO layer.
-- Throttle back repetitious error messages in slurmd to avoid filling
* Changes in SLURM 0.2.20
=========================
-- Fixes for reported problems:
- slurm/298: Elan initialization error (Invalid vp 2147483674).
- slurm/299: srun fails to exit with multiple ^C's.
-- Temporarily prevent DPCS from allocating jobs with more than eight
sets of consecutive nodes. This was likely causing user applications
to fail with libelan errors. This will be removed after DPCS is updated.
-- Fix bug in popt use, was failing in some versions of Linux.
-- Resend KILL_JOB messages as needed to clear COMPLETING jobs.
-- Install dummy SIGCHLD handler in slurmd to fix problem on NPTL systems
where slurmd was not notified of terminated tasks.
* Changes in SLURM 0.2.19
=========================
-- Memory corruption bug fixed, it was causing slurmctld to seg-fault
* Changes in SLURM 0.2.18
=========================
-- Fixes for reported problems:
- slurm/287: slurm protocol timeouts when using TotalView.
- slurm/291: srun fails using ``-n 1'' under multi-node allocation.
- slurm/294: srun IO buffer reports ENOSPC.
-- Memory corruption bug fixed, it was causing slurmctld to seg-fault
-- Non-responding nodes now go from DRAINING to DRAINED state when
jobs complete
-- Do not schedule pending jobs while any job is actively COMPLETING
unless the submitted job specifically identifies its nodes (like DPCS)
-- Reset priority of jobs with priority==1 when a non-responding node
starts to respond again
-- Ignore jobs with priority==1 when establishing new baseline upon
slurmctld restart
-- Make slurmctld/message retry be timer based rather than queue based
for better scalability
-- Slurmctld logging is more concise, using hostlists more
-- srun --no-allocate used special job_id range to avoid conflicts
or premature job termination (purging by slurmctld)
-- New --jobid=id option in srun to initiate job step under an existing
allocation.
-- Support in srun for TotalView bulk launch.
* Changes in SLURM 0.2.17
=========================
-- Fixes for reported problems:
- slurm/279: Hold jobs that can't execute due to DOWN or DRAINED
nodes and release when nodes are returned to service.
- slurm/285: "srun killed due to SIGPIPE"
-- Support for running job steps on nodes relative to current
allocation via srun -r, --relative=n option.
-- SIGKILL no longer broadcasted to job via srun on task failure unless
--no-allocate option is used.
-- Re-enabled "chkconfig --add" in default RPMs.
-- Backup controller setting proper PID into slurmctld.pid file.
-- Backup controller restores QSW state each time it assumes control
-- Backup controller purges old job records before assuming control
to avoid resurrecting defunct jobs.
-- Kill jobs on non-responding DRAINING nodes and make their state
DRAINED.
-- Save state upon completion of a job's last EPILOG_COMPLETION to
reduce possibility of inconsistent job and node records when the
controller is transitioning between primary and backup.
-- Change logging level of detailed communication errors to not print
them unless detailed debugging is requested.
-- Increase number of concurrent controller server threads from 20
to 50 and restructure code to handle backlogs more efficiently.
-- Partition state at controller startup is based upon slurm.conf
rather than previously saved state. Additional improvements to
avoid inconsistent job/node/partition states at restart. Job state
information is used to arbitrate conflicts.
-- Orphaned file descriptors eliminated.
* Changes in SLURM 0.2.16
=========================
-- Fixes for reported problems:
- slurm/265: Early termination of srun could cause job to remain in queue.
- slurm/268: Slurmctld could deadlock if there was a delay in the
termination of a large node-count job. An EPILOG_COMPLETE RPC was
added so that slurmd could notify slurmctld whenever the job
termination was completed.
- slurm/270: Segfault in sinfo if a configured node lacked a partition.
- slurm/278: Exit code in scontrol did not indicate failure.
-- Fixed bug in slurmd that caused the daemon to occaisionally kill itself.
-- Fixed bug in srun when running with --no-allocate and >1 process per node.
-- Small fixes and updates for srun manual.
* Changes in SLURM 0.2.15
=========================
-- Fixes for reported problems:
- slurm/265: Job was orphaned when allocation response message could
not be sent. Job is now killed on allocation response message transmit
failure and socket error details are logged.
- Fix for slurm/267: "Job epilog may run multiple times."
-- Squeue job TIMELIMIT format changed from "h:mm" to "d:h:mm:ss".
-- DPCS initiated jobs have steps execute properly without explicit
specification of node count.
* Changes in SLURM 0.2.14
=========================
-- Fixes for reported problems:
- slurm/194: "srun doesn't handle most options when run under an allocation."
- slurm/244: "REQ: squeue shows requested size of pending jobs."
-- SLURM_NODELIST environment variable now exported to all jobs, not
only batch jobs.
-- Nodelist displayed in squeue for completing jobs is now restricted to
completing nodes.
-- Node "reason" field properly displayed in sinfo even with filtering.
-- ``slurm_tv_clean'' daemon now supports a log file.
-- Batch jobs are now re-queued on launch failure.
-- Controller confirms job scripts for batch jobs are still running on
node zero at node registration.
-- Default RPMs no longer stop/start SLURM daemons on upgrade or install.
* Changes in SLURM 0.2.13
=========================
-- Fixes for reported problems:
- Fixed bug in slurmctld where "drained" nodes would go back into
the "idle" state under some conditions (slurm/228).
- Added possible fix for slurm/229: "slurmd occasionally fails
to reap all children."
-- Fixed memory leak in auth_munge plugin.
-- Added fix to slurmctld to allow arbitrarily large job specifications
to be saved and recovered in the state file.
-- Allow "updates" in the configuration file of previously defined
node state and reason.
-- On "forceful termination" of a running job step, srun now exits
unconditionally, instead of waiting for all I/O.
-- Slurmctld now uses pidfile to kill old daemon when a new one is started.
-- Addition of new daemon "slurm_tv_clean" used to clean up jobs orphaned
due to use of the TotalView parallel debugger.
* Changes in SLURM 0.2.12
=========================
-- Fixes for reported problems:
- Fix for "waitpid: No child processes" when using TotalView (slurm/217).
- Implemented temporary workaround for slurm/223: "Munge decode failed:
Munged communication error."
- Temporary fix for slurm/222: "elan3_create(0): Invalid argument."
-- Fixed memory leaks in slurmctld (mostly due to reconfigure).
-- More squeue/sinfo interface changes (see squeue(1), sinfo(1)).
-- Sinfo now accepts list of node states to -t,--state option.
-- Node "reason" field now available via sinfo command (see sinfo(1)).
-- Wrapper source for srun (srun.wrapper.c) now installed and available
for TotalView support.
-- Improved retry login in user commands for periods when slurmctld
primary is down and backup has not yet taken over.
* Changes in SLURM 0.2.11
=========================
-- Changes in srun:
- Fixed bug in signal handling that occaisonally resulted in orphaned
jobs when using Ctrl-C.
- Return non-zero exit code when remote tasks are killed by a signal.
- SIGALRM is now blocked by default.
-- Added ``reason'' string for down, drained, or draining nodes.
-- Added -V,--version option to squeue and sinfo.
-- Improved some error messages from user utilities.
* Changes in SLURM 0.2.10
=========================
-- New slurm.conf configuration parameters:
- WaitTime: Default for srun -w,--wait parameter.
- MaxJobCount: Maximum number of jobs SLURM can handle at one time.
- MinJobAge: Minimum time since completing before job is purged from
slurmctld memory.
-- Block user defined signals USR1 and USR2 in slurmd session manager.
-- More squeue cleanup.
-- Support for passing options to sinfo via environment variables.
-- Added option to scontrol to find intersection of completing jobs and nodes.
-- Added fix in auth_munge to prevent "Munged communication error" message.
* Changes in SLURM 0.2.9
========================
-- Fixes for reported problems:
- Argument to srun `-n' option was taken as octal if preceeded with a `0'.
-- New format for Elan hosts config file (/etc/elanhosts. See README)
-- Various fixes for managing COMPLETING jobs.
-- Support for passing options to squeue via environment variables
(see squeue(1))
* Changes in SLURM 0.2.8
=========================
-- Fix for bug in slurmd that could make debug messages appear in job output.
-- Fix for bug in slurmctld retry count computation.
-- Srun now times out slow launch threads.
-- "Time Used" output in squeue now includes seconds.
* Changes in SLURM 0.2.7
-- Fix for bug in Elan module that results in slurmd hang.
-- Added completing job state to default list of states to print with squeue.
* Changes in SLURM 0.2.6
=========================
-- More fixes for handling cleanup of slow terminating jobs.
-- Fixed bug in srun that might leave nodes allocated after a Ctrl-C.
* Changes in SLURM 0.2.5
=========================
-- Various fixes for cleanup of slow terminating or unkillable jobs.
-- Fixed some small memory leaks in communications code.
-- Added hack for synchronized exit of jobs on large node count.
-- Long lists of nodes are no longer truncated in sinfo.
-- Print more descriptive error message when tasks exit with nonzero status.
-- Fixed bug in srun where unsuccessful launch attempts weren't detected.
-- Elan network error resolver thread now runs from elan module in slurmd.
-- Slurmctld uses consecutive Elan context and program description numbers
instead of choosing them randomly.
* Changes in SLURM 0.2.4
==========================
-- Fix for file descriptor leak in slurmctld.
-- auth_munge plugin now prints credential info on decode failure.
-- Minor changes to scancel interface.
-- Filename format option "%J" now works again for srun --output and --error.
* Changes in SLURM 0.2.3
==========================
-- Fix bug in srun when using per-task files for stderr.
-- Better error reporting on failure to open per-task input/output files.
-- Update auth_munge plugin for munge 0.1.
-- Minor changes to squeue interface.
-- New srun option `--hold' to submit job in "held" state.
* Changes in SLURM 0.2.2
==========================
-- Fixes for reported problems:
- Execution of script allocate mode fails in some cases. (gnats:161)
- Errors using per-task input files with Elan support. (gnats:162)
- srun doesn't handle all environment variables properly. (gnats:164)
-- Parallel job is now terminated if a task is killed by a signal.
-- Exit status of srun is set based on exit codes of tasks.
-- Redesign of sinfo interface and options.
-- Shutdown of slurmctld no longer propagates shutdown to all nodes.
* Changes in SLURM 0.2.1
===========================
-- Fix bug where reconfigure request to slurmctld killed the daemon.
* Changes in SLURM 0.2.0
============================
-- SlurmdTimeout of 0 means never set a non-responding node to DOWN.
-- New srun option, -u,--unbuffered, for unbuffered stdout.
-- Enhancements for sinfo
- Non-responding nodes show "*" character appended instead of "NoResp+".
- Node states show abbreviated variant by default
-- Enhancements for scontrol.
- Added "ping" command to show current state of SLURM controllers.
- Job dump in scontrol shows user name as well as UID.
- Node state of DRAIN is appropriately mapped to DRAINING or DRAINED.
-- Fix for bug where request for task count greater than partition limit
was queued anyway.
-- Fix for bugs in job end time handling.
-- Modifications for error free builds on 64 bit architectures.
-- Job cancel immediately deallocates nodes instead of waiting on srun.
-- Attempt to create slurmd spool if it does not exist.
-- Fixed signal handling bug in srun allocate mode.
-- Earlier error detection in slurmd startup.
-- "fatal: _shm_unlock: Numerical result out of range" bug fixed in slurmd.
-- Config file parsing is now case insensitive.
-- SLURM_NODELIST environment variable now set in allocate mode.
* Changes in SLURM 0.2.0-pre2
=============================
-- Fix for reconfigure when public/private key path is changed.
-- Shared memory fixes in slurmd.
- fix for infinite semaphore incrementation bug.
-- Semaphore fixes in slurmctld.
-- Slurmctld now remembers which nodes have registered after recover.
-- Fixed reattach bug when tasks have exited.
-- Change directory to /tmp in slurmd if daemonizing.
-- Logfiles are reopened on reconfigure.