- 23 Feb, 2011 1 commit
-
-
Danny Auble authored
-
- 17 Feb, 2011 1 commit
-
-
Moe Jette authored
option. Patches from Rod Schulz, Bull.
-
- 16 Feb, 2011 2 commits
-
-
Moe Jette authored
-
Danny Auble authored
-
- 15 Feb, 2011 6 commits
-
-
Don Lipari authored
-
Moe Jette authored
-
Don Lipari authored
-- Removed remnant code for enforcing max sockets/cores/threads in the cons_res plugin. This was responsible for a bug reported by Rod Schultz.
-
Moe Jette authored
set, then salloc can execute in the background. Otherwise a message will be printed and the job allocation halted until brought into the foreground.
-
Moe Jette authored
terminal's state.
-
Danny Auble authored
-
- 14 Feb, 2011 1 commit
-
-
Danny Auble authored
-
- 11 Feb, 2011 1 commit
-
-
Danny Auble authored
-
- 10 Feb, 2011 2 commits
-
-
Danny Auble authored
-
Danny Auble authored
Fix issue when updating database for clusters that were previously deleted before upgrade to 2.2 database.
-
- 09 Feb, 2011 3 commits
-
-
Danny Auble authored
-
Don Lipari authored
-
Danny Auble authored
-
- 08 Feb, 2011 4 commits
-
-
Danny Auble authored
-
Danny Auble authored
-
Moe Jette authored
IDLE (in case the previous node state was DOWN).
-
Moe Jette authored
set the systems up_node_bitmap.
-
- 05 Feb, 2011 1 commit
-
-
Danny Auble authored
-
- 02 Feb, 2011 2 commits
- 31 Jan, 2011 5 commits
-
-
Don Lipari authored
-
Moe Jette authored
-
Moe Jette authored
consider the job's time limit when attempting to backfill schedule. The job will just be preempted as needed at any time.
-
Moe Jette authored
Priority.
-
Danny Auble authored
Updated configure option "--enable-cray-emulation" (still under development) to emulate a cray XT/XE system, and auto-detect a real Cray XT/XE systems (removed no longer needed --enable-cray configure option). Building on native Cray systems requires the cray-MySQL-devel-enterprise rpm and expat XML parser library/headers. -This line, and those below, will be ignored-- M configure M Makefile.in M contribs/torque/Makefile.in M contribs/slurmdb-direct/Makefile.in M contribs/Makefile.in M contribs/sjobexit/Makefile.in M contribs/perlapi/libslurmdb/Makefile.in M contribs/perlapi/Makefile.in M contribs/perlapi/libslurm/Makefile.in M contribs/phpext/Makefile.in M contribs/pam/Makefile.in M src/sbcast/Makefile.in M src/plugins/select/Makefile.in M src/plugins/select/bluegene/Makefile.in M src/plugins/select/bluegene/block_allocator/Makefile.in M src/plugins/select/bluegene/plugin/Makefile.in M src/plugins/select/bgq/Makefile.in M src/plugins/select/linear/Makefile.in M src/plugins/select/cons_res/Makefile.in A src/plugins/select/cray/basil_alps.h A src/plugins/select/cray/basil_interface.h M src/plugins/select/cray/Makefile.in A src/plugins/select/cray/libalps A src/plugins/select/cray/libalps/nodespec.c A src/plugins/select/cray/libalps/Makefile.in A src/plugins/select/cray/libalps/do_release.c A src/plugins/select/cray/libalps/basil_request.c A src/plugins/select/cray/libalps/popen2.c A src/plugins/select/cray/libalps/parser_common.c A src/plugins/select/cray/libalps/basil_mysql_routines.c A src/plugins/select/cray/libalps/memory_handling.c A src/plugins/select/cray/libalps/do_confirm.c A src/plugins/select/cray/libalps/atoul.c A src/plugins/select/cray/libalps/parser_basil_1.0.c A src/plugins/select/cray/libalps/parser_basil_1.1.c A src/plugins/select/cray/libalps/parser_basil_3.1.c A src/plugins/select/cray/libalps/do_query.c A src/plugins/select/cray/libalps/Makefile.am A src/plugins/select/cray/libalps/parser_internal.h A src/plugins/select/cray/libalps/do_reserve.c M src/plugins/select/cray/Makefile.am A src/plugins/select/cray/basil_interface.c M src/plugins/select/cray/select_cray.c M src/plugins/crypto/Makefile.in M src/plugins/crypto/openssl/Makefile.in M src/plugins/crypto/munge/Makefile.in M src/plugins/priority/basic/Makefile.in M src/plugins/priority/Makefile.in M src/plugins/priority/multifactor/Makefile.in M src/plugins/Makefile.in M src/plugins/mpi/none/Makefile.in M src/plugins/mpi/Makefile.in M src/plugins/mpi/mpich1_p4/Makefile.in M src/plugins/mpi/mpichgm/Makefile.in M src/plugins/mpi/mpichmx/Makefile.in M src/plugins/mpi/mvapich/Makefile.in M src/plugins/mpi/openmpi/Makefile.in M src/plugins/mpi/lam/Makefile.in M src/plugins/mpi/mpich1_shmem/Makefile.in M src/plugins/sched/Makefile.in M src/plugins/sched/wiki/Makefile.in M src/plugins/sched/wiki/get_nodes.c M src/plugins/sched/wiki2/Makefile.in M src/plugins/sched/wiki2/get_nodes.c M src/plugins/sched/builtin/Makefile.in M src/plugins/sched/hold/Makefile.in M src/plugins/sched/backfill/Makefile.in M src/plugins/checkpoint/none/Makefile.in M src/plugins/checkpoint/aix/Makefile.in M src/plugins/checkpoint/Makefile.in M src/plugins/checkpoint/blcr/Makefile.in M src/plugins/checkpoint/ompi/Makefile.in M src/plugins/proctrack/cgroup/Makefile.in M src/plugins/proctrack/aix/Makefile.in M src/plugins/proctrack/rms/Makefile.in M src/plugins/proctrack/lua/Makefile.in M src/plugins/proctrack/Makefile.in M src/plugins/proctrack/linuxproc/Makefile.in M src/plugins/proctrack/pgid/Makefile.in M src/plugins/proctrack/sgi_job/Makefile.in M src/plugins/jobcomp/filetxt/Makefile.in M src/plugins/jobcomp/none/Makefile.in M src/plugins/jobcomp/Makefile.in M src/plugins/jobcomp/script/Makefile.in M src/plugins/jobcomp/mysql/Makefile.in M src/plugins/jobcomp/pgsql/Makefile.in M src/plugins/job_submit/lua/Makefile.in M src/plugins/job_submit/Makefile.in M src/plugins/job_submit/logging/Makefile.in M src/plugins/job_submit/defaults/Makefile.in M src/plugins/job_submit/partition/Makefile.in M src/plugins/jobacct_gather/linux/Makefile.in M src/plugins/jobacct_gather/none/Makefile.in M src/plugins/jobacct_gather/aix/Makefile.in M src/plugins/jobacct_gather/Makefile.in M src/plugins/gres/Makefile.in M src/plugins/gres/nic/Makefile.in M src/plugins/gres/gpu/Makefile.in M src/plugins/auth/none/Makefile.in M src/plugins/auth/Makefile.in M src/plugins/auth/authd/Makefile.in M src/plugins/auth/munge/Makefile.in M src/plugins/switch/elan/Makefile.in M src/plugins/switch/none/Makefile.in M src/plugins/switch/federation/Makefile.in M src/plugins/switch/Makefile.in M src/plugins/task/none/Makefile.in M src/plugins/task/Makefile.in M src/plugins/task/affinity/Makefile.in M src/plugins/preempt/none/Makefile.in M src/plugins/preempt/partition_prio/Makefile.in M src/plugins/preempt/qos/Makefile.in M src/plugins/preempt/Makefile.in M src/plugins/topology/none/Makefile.in M src/plugins/topology/tree/Makefile.in M src/plugins/topology/node_rank/Makefile.in M src/plugins/topology/3d_torus/Makefile.in M src/plugins/topology/Makefile.in M src/plugins/accounting_storage/filetxt/Makefile.in M src/plugins/accounting_storage/none/Makefile.in M src/plugins/accounting_storage/Makefile.in M src/plugins/accounting_storage/mysql/Makefile.in M src/plugins/accounting_storage/pgsql/Makefile.in M src/plugins/accounting_storage/common/Makefile.in M src/plugins/accounting_storage/slurmdbd/Makefile.in M src/Makefile.in M src/sshare/Makefile.in M src/strigger/Makefile.in M src/sattach/Makefile.in M src/srun/Makefile.in M src/common/node_conf.h M src/common/read_config.c M src/common/Makefile.am M src/common/Makefile.in M src/common/node_select.c D src/common/basil_resv_conf.c D src/common/basil_resv_conf.h M src/sprio/Makefile.in M src/sacct/Makefile.in M src/sview/Makefile.in M src/sview/job_info.c M src/sstat/Makefile.in M src/sreport/Makefile.in M src/smap/Makefile.in M src/scontrol/Makefile.in M src/sacctmgr/Makefile.in M src/database/Makefile.in M src/sbatch/Makefile.in M src/slurmd/slurmstepd/Makefile.in M src/slurmd/slurmstepd/mgr.c M src/slurmd/Makefile.in M src/slurmd/slurmd/Makefile.in M src/slurmd/common/Makefile.in M src/squeue/Makefile.in M src/scancel/Makefile.in M src/slurmctld/Makefile.in M src/slurmctld/proc_req.c D src/slurmctld/basil_interface.c D src/slurmctld/basil_interface.h M src/slurmctld/controller.c M src/slurmctld/read_config.c M src/slurmctld/node_scheduler.c M src/slurmctld/Makefile.am M src/api/Makefile.in M src/srun_cr/Makefile.in M src/slurmdbd/Makefile.in M src/salloc/Makefile.in M src/salloc/opt.c M src/salloc/salloc.c M src/sinfo/Makefile.in M src/db_api/Makefile.in M testsuite/slurm_unit/Makefile.in M testsuite/slurm_unit/common/Makefile.in M testsuite/slurm_unit/api/Makefile.in M testsuite/slurm_unit/api/manual/Makefile.in M testsuite/Makefile.in M testsuite/expect/Makefile.in M auxdir/Makefile.in M auxdir/x_ac_cray.m4 M config.h.in M configure.ac M doc/Makefile.in M doc/html/Makefile.in M doc/man/Makefile.in M NEWS
-
- 29 Jan, 2011 11 commits
-
-
Moe Jette authored
This disables srun support: * on native Cray systems (having 'apbasil' available) it is currently not possible, since it would require to have a slurmd on each compute node -- which at least at the moment is still done by the ALPS daemons; * if running srun from a remote host and trying to launch a job on a remote Cray host, the same consideration applies; * trying to use Cray-enabled srun (HAVE_CRAY) to launch a job on a non-Cray system is allowed to proceed.srun: disable srun on local/remote Cray systems 14_srun.diff
-
Moe Jette authored
On Cray, wait_job means to confirm the already existing ALPS reservation. This is handled already: * for salloc by select_g_job_ready() - hence no need to call again; * for batch jobs it is done in the stepdmanager. Hence just print a warning to the user. 13_scontrol-no-wait_job.diff
-
Moe Jette authored
This adds support for execution of salloc on a local Cray system, disabling node sharing (still not supported on XT/XE). It further disables running salloc within salloc, as it leads to errors: since Cray uses process group / PAGG IDs for tracking its reservations, running salloc from within salloc invariably leads to a ALPS resource allocation error. Thirdly, it disable Cray node allocation on non-Cray systems, since this requires that the host on which salloc spawns the shell process is capable of Cray task launch. If it is not, then the remote slurmctld will reserve the requested nodes, but the local host runninc salloc will neither be able to confirm the ALPS reservation (due to the absence of a local apbasil command), nor would it be able to run jobs on the compute nodes. To distinguish this case from general task launch (we use a frontend host where salloc could end up running jobs on different clusters, depending on the value exported via $SLURM_CONF), the following condition is tested: * Cray build support has been enabled (HAVE_CRAY); * the loaded slurm.conf uses select/cray (required on Cray hosts); * the local host does not have support for apbasil (HAVE_NATIVE_CRAY undefined). Since the 'apbasil' command is only available on native Cray systems, this combination of conditions seems sufficient to prevent accidentally using salloc on a host which does not support it. (For sbatch the case is different, since the job script runs on the remote host.) 11_salloc.diff done with minor change for Cray emulation
-
Moe Jette authored
This puts the Basil inventory immediately before each (backfill) schedule. Having considered multiple alternatives, this is the most robust and least wasteful solution. The reason is that ALPS keeps internal node state, which can be changed * by the administrator (xtprocadmin), * by the node health checker programs (setting some nodes into 'suspect'), * by ALPS itself. Tracking this periodically, e.g. every HealthCheckInterval, may mean to miss some state changes. The result would not be a crash, but a subsequently failed ALPS reservation, which would require to undo some of the slurm state. Also added inventory to plugin/sched/wiki and wiki2 at get_node time 09_Cray-INVENTORY-directly-before-schedule.diff
-
Moe Jette authored
select/cray: update compile-time and runtime support for Cray build These changes update build support for Cray XT/XE: 1. renamed '--cray-xt' into '--cray' since also XE systems are supported; 2. autoconf rules to cover the various possible build cases: a) --enable-cray=off: HAVE_CRAY/HAVE_NATIVE_CRAY undefined, b) --enable-cray=on: HAVE_CRAY defined b1) local host is a native Cray system: HAVE_NATIVE_CRAY defined (requires installation of mysql-devel and libexpat-devel packages), b2) local host is not a native Cray system: the conditionally built parts (basil_interface.c, libalps.la) are not built; 3. updated configure logic: - since Cray support depends on mySQL, reordered tests in configure.ac, - reordered logic with regard to changes in (2), - an AM_CONDITIONAL to build native-Cray parts conditionally, - updated configure messages (XT/XE); 4. run-time read_conf test to ensure use of select/cray is properly supported, 5. an update of the NEWS file due to the change in (1) ==> may have a conflict in case you have a locally-updated copy. I have compile-tested the three possible scenarios in (2).
-
Moe Jette authored
03_Bug-fix_slurmctld-swap-both-NodeAddr-and-NodeHostname-when-reordering.diff
-
Moe Jette authored
scontrol: warn user that base node state can not be changed on Cray The base node state (UP, DOWN, ALLOCATED, ...) is handled by ALPS and inferred from reading the output of ALPS inventory requests. To avoid inconsistencies, it is not possible for a user to alter this node state. This patch adds a warning to scontrol if a user wants to change node state through slurm: palu> scontrol update NodeName=nid00171 State=DOWN State=DOWN can not be changed through slurm: use native Cray tools such as e.g. xtprocadmin(8) The 'meta' states such as DRAIN can still be changed.
-
https://eris.llnl.gov/svn/slurm/trunkMoe Jette authored
This reverses some patches from Gerrit that were old, going to work forward now from the start
-
Moe Jette authored
XT/XE systems, and build on native Cray XT/XE systems (auto-detected). Building on native Cray systems requires the cray-MySQL-devel-enterprise rpm and expat XML parser library/headers. select/cray: update compile-time and runtime support for Cray build These changes update build support for Cray XT/XE: 1. renamed '--cray-xt' into '--cray' since also XE systems are supported; 2. autoconf rules to cover the various possible build cases: a) --enable-cray=off: HAVE_CRAY/HAVE_NATIVE_CRAY undefined, b) --enable-cray=on: HAVE_CRAY defined b1) local host is a native Cray system: HAVE_NATIVE_CRAY defined (requires installation of mysql-devel and libexpat-devel packages), b2) local host is not a native Cray system: the conditionally built parts (basil_interface.c, libalps.la) are not built; 3. updated configure logic: - since Cray support depends on mySQL, reordered tests in configure.ac, - reordered logic with regard to changes in (2), - an AM_CONDITIONAL to build native-Cray parts conditionally, - updated configure messages (XT/XE); 4. run-time read_conf test to ensure use of select/cray is properly supported, 5. an update of the NEWS file due to the change in (1) ==> may have a conflict in case you have a locally-updated copy. I have compile-tested the three possible scenarios in (2).
-
Moe Jette authored
03_Cray-BASIL-node-ranking.diff select/cray: perform node ranking This supplies the select function-pointer to request a reordering of nodes based on the current Cray node ordering. The Cray node ordering is set internally via the ALPS_NIDORDER configuration variables that controls the way ALPS considers nodes. This ordering in turn determines the order of nodes as the appear subsequently in the Inventory output. The present patch exploits this fact and uses an auto-incrementing number to reflect the node ranking (counting is reversed since the parser returns the nodes in stack/LIFO order). The node ranking is performed on slurmctld (re-)configuration, hence the tests are more stringent: exit if Inventory fails (this condition is extremely rare) and if no nodes are powered up (also a condition that can be cured by restarting slurmctld only when the system is ready).
-
Moe Jette authored
03_node-reordering-NodeHostName.diff
-