Newer
Older
* Changes in Slurm 14.03.3-2
============================
* Changes in Slurm 14.03.3
==========================
-- Correction to default batch output file name. In version 14.03.2 was using
"slurm_<jobid>_4294967294.out" due to error in job array logic.
-- In slurm.spec file, replace "Requires cray-MySQL-devel-enterprise" with
"Requires mysql-devel".
-- Fix race condition if PrologFlags=Alloc,NoHold is used.
-- Cray - Make NPC only limit running other NPC jobs on shared blades instead
of limited non NPC jobs.
-- Fix for sbatch #PBS -m (mail) option parsing.
-- Fix job dependency bug. Jobs dependent upon multiple other jobs may start
prematurely.
-- Set "Reason" field for all elements of a job array on short-circuited
scheduling for job arrays.
-- Allow -D option of salloc/srun/sbatch to specify relative path.
-- Added SchedulerParameter of batch_sched_delay to permit many batch jobs
to be submitted between each scheduling attempt to reduce overhead of
scheduling logic.
-- Added job reason of "SchedTimeout" if the scheduler was not able to reach
the job to attempt scheduling it.
-- Add job's exit state and exit code to email message.
-- scontrol hold/release accepts job name option (in addition to job ID).
-- Handle when trying to cancel a step that hasn't started yet better.
-- Add --priority option to salloc, sbatch and srun commands.
-- Honor partition priorities over job priorities.
-- Fix sacct -c when using jobcomp/filetxt to read newer variables
-- Fix segfault of sacct -c if spaces are in the variables.
-- Release held job only with "scontrol release <jobid>" and not by resetting
the job's priority. This is needed to support job arrays better.
-- Correct squeue command not to merge jobs with state pending and completing
together.
-- Fix issue where user is requesting --acctg-freq=0 and no memory limits.
-- Fix issue with GrpCPURunMins if a job's timelimit is altered while the job
is running.
-- Temporary fix for handling our typemap for the perl api with newer perl.
-- Fix allowgroup on bad group seg fault with the controller.
-- Handle node ranges better when dealing with accounting max node limits.
* Changes in Slurm 14.03.1-2
-- Update configure to set correct version without having to run autogen.sh
* Changes in Slurm 14.03.1
==========================
-- Add support for job std_in, std_out and std_err fields in Perl API.
-- Add "Scheduling Configuration Guide" web page.
-- BGQ - fix check for jobinfo when it is NULL
-- Do not check cleaning on "pending" steps.
-- task/cgroup plugin - Fix for building on older hwloc (v1.0.2).
-- In the PMI implementation by default don't check for duplicate keys.
Set the SLURM_PMI_KVS_DUP_KEYS if you want the code to check for
duplicate keys.
-- Permit user root to propagate resource limits higher than the hard limit
slurmd has on that compute node has (i.e. raise both current and maximum
limits).
-- Fix issue with license used count when doing an scontrol reconfig.
-- Fix the PMI iterator to not report duplicated keys.
-- Fix issue with sinfo when -o is used without the %P option.
-- Rather than immediately invoking an execution of the scheduling logic on
every event type that can enable the execution of a new job, queue its
execution. This permits faster execution of some operations, such as
modifying large counts of jobs, by executing the scheduling logic less
frequently, but still in a timely fashion.
-- If the environment variable is greater than MAX_ENV_STRLEN don't
set it in the job env otherwise the exec() fails.
-- Optimize scontrol hold/release logic for job arrays.
-- Modify srun to report an exit code of zero rather than nine if some tasks
exit with a return code of zero and others are killed with SIGKILL. Only an
exit code of zero did this.
-- Avoid slurmctld crash getting job info if detail_ptr is NULL.
-- Fix sacctmgr add user where both defaultaccount and accounts are specified.
-- Added SchedulerParameters option of max_sched_time to limit how long the
main scheduling loop can execute for.
-- Added SchedulerParameters option of sched_interval to control how frequently
the main scheduling loop will execute.
-- Move start time of main scheduling loop timeout after locks are aquired.
-- Add squeue job format option of "%y" to print a job's nice value.
-- Update scontrol update jobID logic to operate on entire job arrays.
-- Fix PrologFlags=Alloc to run the prolog on each of the nodes in the
allocation instead of just the first.
-- Fix race condition if a step is starting while the slurmd is being
restarted.
-- Make sure a job's prolog has ran before starting a step.
-- BGQ - Fix invalid memory read when using DefaultConnType in the
bluegene.conf
-- Make sure we send node state to the DBD on clean start of controller.
-- Fix some sinfo and squeue sorting anomalies due to differences in data
types.
-- Only send message back to slurmctld when PrologFlags=Alloc is used on a
Cray/ALPS system, otherwise use the slurmd to wait on the prolog to gate
the start of the step.
-- Remove need to check PrologFlags=Alloc in slurmd since we can tell if prolog
has ran yet or not.
-- Fix squeue to use a correct macro to check job state.
-- BGQ - Fix incorrect logic issues if MaxBlockInError=0 in the bluegene.conf.
-- priority/basic - Insure job priorities continue to decrease when jobs are
submitted with the --nice option.
-- Make the PrologFlag=Alloc work on batch scripts
-- Make PrologFlag=NoHold (automatically sets PrologFlag=Alloc) not hold in
salloc/srun, instead wait in the slurmd when a step hits a node and the
prolog is still running.
-- Added --cpu-freq=highm1 (high minus one) option.
-- Expand StdIn/Out/Err string length output by "scontrol show job" from 128
to 1024 bytes.
-- squeue %F format will now print the job ID for non-array jobs.
-- Use quicksort for all priority based job sorting, which improves performance
significantly with large job counts.
-- If a job has already been released from a held state ignore successive
release requests.
-- Fix srun/salloc/sbatch man pages for the --no-kill option.
-- Add squeue -L/--licenses option to filter jobs by license names.
-- Handle abort job on node on front end systems without core dumping.
-- Fix dependency support for job arrays.
-- When updating jobs verify the update request is not identical to
the current settings.
-- When sorting jobs and priorities are equal sort by job_id.
-- Do not overwrite existing reason for node being down or drained.
-- Requeue batch job if Munge is down and credential can not be created.
-- Make _slurm_init_msg_engine() tolerate bug in bind() returning a busy
ephemeral port.
-- Don't block scheduling of entire job array if it could run in multiple
partitions.
-- Introduce a new debug flag Protocol to print protocol requests received
together with the remote IP address and port.
-- CRAY - Set up the network even when only using 1 node.
-- CRAY - Greatly reduce the number of error messages produced from the task
plugin and provide more information in the message.
* Changes in Slurm 14.03.0
==========================
-- job_submit/lua: Fix invalid memory reference if script returns error message
for user.
-- Add logic to sleep and retry if slurm.conf can't be read.
-- Reset a node's CpuLoad value at least once each SlurmdTimeout seconds.
-- Scheduler enhancements for reservations: When a job needs to run in
reservation, but can not due to busy resources, then do not block all jobs
in that partition from being scheduled, but only the jobs in that
reservation.
-- Export "SLURM*" environment variables from sbatch even if --export=NONE.
-- When recovering node state if the Slurm version is 2.6 or 2.5 set the
protocol version to be SLURM_2_5_PROTOCOL_VERSION which is the minimum
supported version.
-- Update the scancel man page documenting the -s option.
-- Update sacctmgr man page documenting how to modify account's QOS.
-- Fix for sjstat which currently does not print >1TB memory values correctly.
-- Change xmalloc()/xfree() to malloc()/free() in hostlist.c for better
performance.
-- Update squeue.1 man page describing the SPECIAL_EXIT state.
-- Added scontrol option of errnumstr to return error message given a slurm
error number.
-- If srun invoked with the --multi-prog option, but no task count, then use
the task count provided in the MPMD configuration file.
-- Prevent sview abort on some systems when adding or removing columns to the
display for nodes, jobs, partitions, etc.
-- Add job array hash table for improved performance.
-- Make AccountingStorageEnforce=all not include nojobs or nosteps.
-- Added sacctmgr mod qos set RawUsage=0.
-- Modify hostlist functions to accept more than two numeric ranges (e.g.
"row[1-3]rack[0-8]slot[0-63]")
-- Run job scheduling logic immediately when nodes enter service.
-- Added sbatch '--parsable' option to output only the job id number and the
cluster name separated by a semicolon. Errors will still be displayed.
-- Added failure management "slurmctld/nonstop" plugin.
-- Prevent jobs being killed when a checkpoint plugin is enabled or disabled.
-- Update the documentation about SLURM_PMI_KVS_NO_DUP_KEYS environment
variable.
-- select/cons_res bug fix for range of node counts with --cpus-per-task
option (e.g. "srun -N2-3 -c2 hostname" would allocate 2 CPUs on the first
node and 0 CPUs on the second node).
-- Change reservation flags field from 16 to 32-bits.
-- Add reservation flag value of "FIRST_CORES".
-- Added the idea of Resources to the database. Framework for handling
license servers outside of Slurm.
-- When starting the slurmctld only send past job/node state information to
accounting if running for the first time (should speed up startup
dramatically on systems with lots of nodes or lots of jobs).
-- Make job array expressions more flexible to accept multiple step counts in
the expression (e.g. "--array=1-10:2,50-60:5,123").
-- switch/cray - add state save/restore logic tracking allocated ports.
-- SchedulerParameters - Replace max_job_bf with bf_max_job_start (both will
work for now).
-- Add SchedulerParameters options of preempt_reorder_count and
preempt_strict_order.
-- Make memory types in acct_gather uint64_t to handle systems with more than
4TB of memory on them.
-- BGQ - --export=NONE option for srun to make it so only the SLURM_JOB_ID
and SLURM_STEP_ID env vars are set.
-- Munge plugins - Add sleep between retries if can't connect to socket.
-- Added DebugFlags value of "License".
-- Added --enable-developer which will give you -Werror when compiling.
-- Fix for job request with GRES count of zero.
-- Job array dependency logic: Cache results for major performance improvement.
-- Modify squeue to support filter on job states Special_Exit and Resizing.
-- Defer purging job record until after EpilogSlurmctld completes.
-- Fix handling RPCs from a 14.03 slurmctld to a 2.6 slurmd
* Changes in Slurm 14.03.0pre6
==============================
-- Modify slurmstepd to log messages according to the LogTimeFormat
parameter in slurm.conf.
-- Insure that overlapping reservations do not oversubscribe available
licenses.
-- Added core specialization logic to select/cons_res plugin.
-- Added whole_node field to job_resources structure and enable gang scheduling
for jobs with core specialization.
-- When using FastSchedule = 1 the nodes with less than configured resources
are not longer set DOWN, they are set to DRAIN instead.
-- Modified 'sacctmgr show associations' command to show GrpCPURunMins
by default.
-- Replace the hostlist_push() function with a more efficient
hostlist_push_host().
-- Modify the reading of lustre file system statistics to print more
information when debug and when io error occur.
-- Add specialized core count field to job credential data.
NOTE: This changes the communications protocol from other pre-releases of
version 14.03. All programs must be cancelled and daemons upgraded from
previous pre-releases of version 14.03. Upgrades from version 2.6 or earlier
can take place without loss of jobs
-- Add version number to node and front-end configuration information visible
using the scontrol tool.
-- Add idea of a RESERVED flag for node state so idle resources are marked
not "idle" when in a reservation.
-- Added core specialization plugin infrastructure.
-- Added new job_submit/trottle plugin to control the rate at which a user
can submit jobs.
-- CRAY - added network performance counters option.
-- Allow scontrol suspend/resume to accept jobid in the format jobid_taskid
to suspend/resume array elements.
-- In the slurmctld job record, split "shared" variable into "share_res" (share
resource) and "whole_node" fields.
-- Fix the format of SLURM_STEP_RESV_PORTS. It was generated incorrectly
when using the hostlist_push_host function and input surrounded by [].
-- Modify the srun --slurmd-debug option to accept debug string tags
(quiet, fatal, error, info verbose) beside the numerical values.
-- Fix the bug where --cpu_bind=map_cpu is interpreted as mask_cpu.
-- Update the documentation egarding the state of cpu frequencies after
a step using --cpu-freq completes.
-- CRAY - Fix issue when a job is requeued and nhc is still running as it is
being scheduled to run again. This would erase the previous job info
that was still needed to clean up the nodes from the previous job run.
(Bug 526).
-- Set SLURM_JOB_PARTITION environment variable set for all job allocations.
-- Set SLURM_JOB_PARTITION environment variable for Prolog program.
-- Added SchedulerParameters option of partition_job_depth to limit scheduling
logic depth by partition.
-- Handle the case in which errno is not reset to 0 after calling
getgrent_r(), which causes the controller to core dump.
-- Added squeue format option of "%X" (core specialization count).
-- Added core specialization web page (just a start for now).
-- Added the SLURM_ARRAY_JOB_ID and SLURM_ARRAY_TASK_ID
-- Fix bug in job step allocation failing due to memory limit.
-- Modify the pbsnodes script to reflect its output on a TORQUE system.
-- Add ability to clear a node's DRAIN flag using scontrol or sview by setting
it's state to "UNDRAIN". The node's base state (e.g. "DOWN" or "IDLE") will
not be changed.
-- Modify the output of 'scontrol show partition' by displaying
DefMemPerCPU=UNLIMITED and MaxMemPerCPU=UNLIMITED when these limits are
configured as 0.
-- mpirun-mic - Major re-write of the command wrapper for Xeon Phi use.
-- Add new configuration parameter of AuthInfo to specify port used by
authentication plugin.
-- Fixed conditional RPM compiling.
-- Corrected slurmstepd ident name when logging to syslog.
-- Fixed sh5util loop when there are no node-step files.
-- Add SLURM_CLUSTER_NAME to environment variables passed to PrologSlurmctld,
Prolog, EpilogSlurmctld, and Epilog
-- Add the idea of running a prolog right when an allocation happens
instead of when running on the node for the first time.
-- If user runs 'scontrol reconfig' but hostnames or the host count changes
the slurmctld throws a fatal error.
-- gres.conf - Add "NodeName" specification so that a single gres.conf file
can be used for a heterogeneous cluster.
-- Add flag to accounting RPC to indicate if job data is packed or not.
-- After all srun tasks have terminated on a node close the stdout/stderr
channel with the slurmstepd on that node.
-- In case of i/o error with slurmstepd log an error message and abort the
job.
-- Add --test-only option to sbatch command to validate the script and options.
The response includes expected start time and resources to be allocated.
==============================
-- Remove the ThreadID documentation from slurm.conf. This functionality has
been obsoleted by the LogTimeFormat.
-- Sched plugins - rename global and plugin functions names for consistency
with other plugin types.
-- BGQ - Added RebootQOSList option to bluegene.conf to allow an implicate
reboot of a block if only jobs in the list are running on it when cnodes
go into a failure state.
-- Correct task count of pending job steps.
-- Improve limit enforcement for jobs, set RLIMIT_RSS, RLIMIT_AS and/or
RLIMIT_DATA to enforce memory limit.
-- Pending job steps will have step_id of INFINITE rather than NO_VAL and
will be reported as "TBD" by scontrol and squeue commands.
-- Add logic so PMI_Abort or PMI2_Abort can propagate an exit code.
-- Added SlurmdPlugstack configuration parameter.
-- Added PriorityFlag DEPTH_OBLIVIOUS to have the depth of an association
not effect it's priorty.
-- Multi-thread the sinfo command (one thread per partition).
-- Added sgather tool to gather files from a job's compute nodes into a
central location.
-- Added configuration parameter FairShareDampeningFactor to offer a greater
priority range based upon utilization.
-- Change MaxArraySize and job's array_task_id from 16-bit to 32-bit field.
Additional Slurm enhancements are be required to support larger job arrays.
-- Added -S/--core-spec option to salloc, sbatch and srun commands to reserve
specialized cores for system use. Modify scontrol and sview to get/set
the new field. No enforcement exists yet for these new options.
struct job_info / slurm_job_info_t: Added core_spec
struct job_descriptorjob_desc_msg_t: Added core_spec
-- Do not set SLURM_NODEID environment variable on front-end systems.
-- Convert bitmap functions to use int32_t instead of int in data structures
and function arguments. This is to reliably enable use of bitmaps containing
up to 4 billion elements. Several data structures containing index values
were also changed from data type int to int32_t:
- Struct job_info / slurm_job_info_t: Changed exc_node_inx, node_inx, and
req_node_inx from type int to type int32_t
- job_step_info_t: Changed node_inx from type int to type int32_t
- Struct partition_info / partition_info_t: Changed node_inx from type int
to type int32_t
- block_job_info_t: Changed cnode_inx from type int to type int32_t
- block_info_t: Changed ionode_inx and mp_inx from type int to type int32_t
- Struct reserve_info / reserve_info_t: Changed node_inx from type int to
type int32_t
-- Modify qsub wrapper output to match torque command output, just print the
job ID rather than "Submitted batch job #"
-- Change Slurm error string for ESLURM_MISSING_TIME_LIMIT from
"Missing time limit" to
"Time limit specification required, but not provided"
-- Change salloc job_allocate error message header from
"Failed to allocate resources" to
"Job submit/allocate failed"
-- Modify slurmctld message retry logic to support Cray cold-standby SDB.
-- Added "JobAcctGatherParams" configuration parameter. Value of "NoShare"
disables accounting for shared memory.
-- Added fields to "scontrol show job" output: boards_per_node,
sockets_per_board, ntasks_per_node, ntasks_per_board, ntasks_per_socket,
ntasks_per_core, and nice.
-- Add squeue output format options for job command and working directory
(%o and %Z respectively).
-- Add stdin/out/err to sview job output.
-- Add new job_state of JOB_BOOT_FAIL for job terminations due to failure to
boot it's allocated nodes or BlueGene block.
-- CRAY - Add SelectTypeParameters NHC_NO_STEPS and NHC_NO which will disable
the node health check script for steps and allocations respectfully.
-- Reservation with CoreCnt: Avoid possible invalid memory reference.
-- Add new error code for attempt to create a reservation with duplicate name.
-- Validate that a hostlist file contains text (i.e. not a binary).
-- switch/generic - propagate switch information from srun down to slurmd and
slurmstepd.
-- CRAY - Do not package Slurm's libpmi or libpmi2 libraries. The Cray version
of those libraries must be used.
-- Added a new option to the scontrol command to view licenses that are
configured in use and avalable. 'scontrol show licenses'.
-- MySQL - Made Slurm compatible with 5.6
==============================
-- Add task pointer to the task_post_term() function in task plugins. The
terminating task's PID is available in task->pid.
-- Defer sending SIGKILL signal to processes while core dump in progress.
-- Added JobContainerPlugin configuration parameter and plugin infrastructure.
-- Added partition configuration parameters AllowAccounts, AllowQOS,
DenyAccounts and DenyQOS.
-- The rpmbuild option for a cray system with ALPS has changed from
%_with_cray to %_with_cray_alps.
-- The log file timestamp format can now be selected at runtime via the
LogTimeFormat configuration option. See the slurm.conf and slurmdbd.conf
man pages for details.
-- Added switch/generic plugin to a job's convey network topology.
-- BLUEGENE - If block is in 'D' state or has more cnodes in error than
MaxBlockInError set the job wait reason appropriately.
-- API use: Generate an error return rather than fatal error and exit if the
configuraiton file is absent or invalid. This will permit Slurm APIs to be
more reliably used by other programs.
-- Add support for load-based scheduling, allocate jobs to nodes with the
largest number of available CPUs. Added SchedulingParameters paramter of
"CR_LLN" and partition parameter of "LLN=yes|no".
-- Added job_info() and step_info() functions to the gres plugins to extract
plugin specific fields from the job's or step's GRES data structure.
-- Added sbatch --signal option of "B:" to signal the batch shell rather than
only the spawned job steps.
-- Added sinfo and squeue format option of "%all" to print all fields available
for the data type with a vertical bar separating each field.
-- Add mechanism for job_submit plugin to generate error message for srun,
salloc or sbatch to stderr. New argument added to job_submit function in
the plugin.
-- Add StdIn, StdOut, and StdErr paths to job information dumped with
"scontrol show job".
-- Permit Slurm administrator to submit a batch job as any user.
-- Set a job's RLIMIT_AS limit based upon it's memory limit and VsizeFactor
configuration value.
-- Remove Postgres plugins
-- Make jobacct_gather/cgroup work correctly and also make all jobacct_gather
plugins more maintainable.
-- Proctrack/pgid - Add support for proctrack_p_plugin_get_pids() function.
-- Sched/backfill - Change default max_job_bf parameter from 50 to 100.
-- Added -I|--item-extract option to sh5util to extract data item from series.
* Changes in Slurm 2.6.10
=========================
-- Switch/nrt - On switch resource allocation failure, free partial allocation.
-- Switch/nrt - Properly track usage of CAU and RDMA resources with multiple
tasks per compute node.
-- Fix issue where user is requesting --acctg-freq=0 and no memory limits.
-- BGQ - Temp fix issue where job could be left on job_list after it finished.
-- BGQ - Fix issue where limits were checked on midplane counts instead of
cnode counts.
-- BGQ - Move code to only start job on a block after limits are checked.
-- Handle node ranges better when dealing with accounting max node limits.
-- Fix perlapi to compile correctly with perl 5.18
-- BGQ - Fix issue with uninitialized variable.
-- Correct sinfo --sort fields to match documentation: E => Reason,
H -> Reason Time (new), R -> Partition Name, u/U -> Reason user (new)
-- If an invalid assoc_ptr comes in don't use the id to verify it.
-- Sched/backfill modified to avoid using nodes in completing state.
-- Correct support for job --profile=none option and related documentation.
-- Properly enforce job --requeue and --norequeue options.
-- If a job --mem-per-cpu limit exceeds the partition or system limit, then
scale the job's memory limit and CPUs per task to satisfy the limit.
-- Correct logic to support Power7 processor with 1 or 2 threads per core
(CPU IDs are not consecutive).
* Changes in Slurm 2.6.9
========================
-- Fix sinfo to work correctly with draining/mixed nodes as well as filtering
on Mixed state.
-- Fix sacctmgr update user with no "where" condition.
-- Fix logic bugs for SchedulerParameters option of max_rpc_cnt.
* Changes in Slurm 2.6.8
========================
-- Add support for Torque/PBS job array options and environment variables.
-- Fix issue where jobs still pending after a reservation would remain
in waiting reason ReqNodeNotAvail.
-- Update last_job_update when a job's state_reason was modified.
-- Free job_ptr->state_desc where ever state_reason is set.
-- Fixed sacct.1 and srun.1 manual pages which contains a hyphen where
a minus sign for options was intended.
-- sinfo - Make sure if partition name is long and the default the last char
doesn't get chopped off.
-- task/affinity - Protect against zero divide when simulating more hardware
than you really have.
-- NRT - Fix issue with 1 node jobs. It turns out the network does need to
be setup for 1 node jobs.
-- Fix recovery of job dependency on task of job array when slurmctld restarts.
-- mysql - Fix invalid memory reference.
-- Lock the /cgroup/freezer subsystem when creating files for tracking processes.
-- Fix preempt/partition_prio to avoid preempting jobs in partitions with
PreemptMode=OFF
-- launch/poe - Implicitly set --network in job step create request as needed.
-- Permit multiple batch job submissions to be made for each run of the
scheduler logic if the job submissions occur at the nearly same time.
-- Fix issue where associations weren't correct if backup takes control and
new associations were added since it was started.
-- Fix race condition is corner case with backup slurmctld.
-- With the backup slurmctld make sure we reinit beginning values in the
slurmdbd plugin.
-- Fix sinfo to work correctly with draining/mixed nodes.
-- MySQL - Fix it so a lock isn't held unnecessarily.
-- Added new SchedulerParameters option of max_rpc_cnt when too many RPCs
are active.
-- BGQ - Fix deny_pass to work correctly.
-- BGQ - Fix sub block steps using a block when the block has passthrough's
in it.
* Changes in Slurm 2.6.7
========================
-- Properly enforce a job's cpus-per-task option when a job's allocation is
constrained on some nodes by the mem-per-cpu option.
-- Correct the slurm.conf man pages and checkpoint_blcr.html page
describing that jobs must be drained from cluster before deploying
-- Fix issue where if using munge and munge wasn't running and a slurmd
needed to forward a message, the slurmd would core dump.
-- Update srun.1 man page documenting the PMI2 support.
-- Fix slurmctld core dump when a jobs gets its QOS updated but there
is not a corresponding association.
-- If a job requires specific nodes and can not run due to those nodes being
busy, the main scheduling loop will block those specific nodes rather than
the entire queue/partition.
-- Fix minor memory leak when updating a job's name.
-- Fix minor memory leak when updating a reservation on a partition using "ALL"
nodes.
-- Fix minor memory leak when adding a reservation with a nodelist and core
count.
-- Update sacct man page description of job states.
-- BGQ - Fix minor memory leak when selecting blocks that can't immediately be
placed.
-- Fixed minor memory leak in backfill scheduler.
-- MYSQL - Fixed memory leak when querying clusters.
-- MYSQL - Fix when updating QOS on an association.
-- NRT - Fix to supply correct error messages to poe/pmd when a launch fails.
-- Add SLURM_STEP_ID to Prolog environment.
-- Add support for SchedulerParameters value of bf_max_job_start that limits
the total number of jobs that can be started in a single iteration of the
backfill scheduler.
-- Don't print negative number when dealing with large memory sizes with
sacct.
-- Fix sinfo output so that host in state allocated and mixed will not be
merged together.
-- GRES: Avoid crash if GRES configurations is inconstent.
-- Make S_SLURM_RESTART_COUNT item available to SPANK.
-- Munge plugins - Add sleep between retries if can't connect to socket.
-- Fix the database query to return all pending jobs in a given time interval.
-- switch/nrt - Correct logic to get dynamic window count.
-- Remove need to use job->ctx_params in the launch plugin, just to simplify
code.
-- NRT - Fix possible memory leak if using multiple adapters.
-- NRT - Fix issue where there are more than NRT_MAXADAPTERS on a system.
-- NRT - Increase Max number of adapters from 8 -> 9
-- NRT - Initialize missing variables when the PMD is starting a job.
-- NRT - Fix issue where we are launching hosts out of numerical order,
this would cause pmd's to hang.
-- NRT - Change xmalloc's to malloc just to be safe.
-- NRT - Sanity check to make sure a jobinfo is there before packing.
-- Add missing options to the print of TaskPluginParam.
-- Fix a couple of issues with scontrol reconfig and adding nodes to
slurm.conf. Rebooting daemons after adding nodes to the slurm.conf
is highly recommended.
* Changes in Slurm 2.6.6
========================
-- sched/backfill - Fix bug that could result in failing to reserve resources
for high priority jobs.
-- Correct job RunTime if requeued from suspended state.
-- Reset job priority from zero (held) on manual resume from suspend state.
-- If FastSchedule=0 then do not DOWN a node with low memory or disk size.
-- Update sshare.1 man page making it consistent with sacctmgr.1.
-- Do not reset a job's priority when the slurmctld restarts if previously
set to some specific value.
-- sview - Fix regression where the Node tab wasn't able to add/remove columns.
-- Fix slurmstepd lock when job terminates inside the infiniband
network traffic accounting plugin.
-- Correct the documentation to read filesystem instead of Lustre. Update
the srun help.
-- Fix the acct_gather_filesystem_lustre.c to compute the Lustre accounting
data correctly accumulating differences between sampling intervals.
Fix the data structure mismatch between acct_gather_filesystem_lustre.c
and slurm_jobacct_gather.h which caused the hdf5 plugin to log incorrect
data.
-- Don't allow PMI_TIME to be zero which will cause floating exception.
-- Fix purging of old reservation errors in database.
-- MYSQL - If starting the plugin and the database isn't up attempt to
connect in a loop instead of producing a fatal.
-- BLUEGENE - If IONodesPerMP changes in bluegene.conf recalculate bitmaps
based on ionode count correctly on slurmctld restart.
-- Fix step allocation when some CPUs are not available due to memory limits.
This happens when one step is active and using memory that blocks the
scheduling of another step on a portion of the CPUs needed. The new step
is now delayed rather than aborting with "Requested node configuration is
not available".
-- Make sure node limits get assessed if no node count was given in request.
-- Removed obsolete slurm_terminate_job() API.
-- Update documentation about QOS limits
-- Retry task exit message from slurmstepd to srun on message timeout.
-- Correction to logic reserving all nodes in a specified partition.
-- Added support for selecting AMD GPU by setting GPU_DEVICE_ORDINAL env var.
-- Properly enforce GrpSubmit limit for job arrays.
-- CRAY - fix issue with using CR_ONE_TASK_PER_CORE
-- CRAY - fix memory leak when using accelerators
* Changes in Slurm 2.6.5
========================
-- Correction to hostlist parsing bug introduced in v2.6.4 for hostlists with
more than one numeric range in brackets (e.g. rack[0-3]_blade[0-63]").
-- Add notification if using proctrack/cgroup and task/cgroup when oom hits.
-- Corrections to advanced reservation logic with overlapping jobs.
-- job_submit/lua - add cpus_per_task field to those available.
-- Add cpu_load to the node information available using the Perl API.
-- Correct a job's GRES allocation data in accounting records for non-Cray
systems.
-- Substantial performance improvement for systems with Shared=YES or FORCE
and large numbers of running jobs (replace bubble sort with quick sort).
-- proctrack/cgroup - Add locking to prevent race condition where one job step
is ending for a user or job at the same time another job stepsis starting
and the user or job container is deleted from under the starting job step.
-- Fixed sh5util loop when there are no node-step files.
-- Fix race condition on batch job termination that could result in a job exit
code of 0xfffffffe if the slurmd on node zero registers its active jobs at
the same time that slurmstepd is recording the job's exit code.
-- Correct logic returning remaining job dependencies in job information
reported by scontrol and squeue. Eliminates vestigial descriptors with
no job ID values (e.g. "afterany").
-- Improve performance of REQUEST_JOB_INFO_SINGLE RPC by removing unnecessary
locks and use hash function to find the desired job.
-- jobcomp/filetxt - Reopen the file when slurmctld daemon is reconfigured
or gets SIGHUP.
-- Remove notice of CVE with very old/deprecated versions of Slurm in
news.html.
-- Fix if hwloc_get_nbobjs_by_type() returns zero core count (set to 1).
-- Added ApbasilTimeout parameter to the cray.conf configuration file.
-- Handle in the API if parts of the node structure are NULL.
-- Fix srun hang when IO fails to start at launch.
-- Fix for GRES bitmap not matching the GRES count resulting in abort
(requires manual resetting of GRES count, changes to gres.conf file,
and slurmd restarts).
-- Modify sview to better support job arrays.
-- Modify squeue to support longer job ID values (for many job array tasks).
-- Fix race condition in authentication credential creation that could corrupt
memory. (NOTE: This race condition has existed since 2003 and would be
exceedingly rare.)
-- Slurmstepd variable initialization - Without this patch, free() is called
on a random memory location (i.e. whatever is on the stack), which can
result in slurmstepd dying and a completed job not being purged in a
timely fashion.
-- Fix slurmstepd race condition when separate threads are reading and
modifying the job's environment, which can result in the slurmstepd failing
with an invalid memory reference.
-- Fix erroneous error messages when running gang scheduling.
-- Fix minor memory leak.
-- scontrol modified to suspend, resume, hold, uhold, or release multiple
jobs in a space separated list.
-- Minor debug error when a connection goes away at the end of a job.
-- Validate return code from calls to slurm_get_peer_addr
-- BGQ - Fix issues with making sure all cnodes are accounted for when multiple
steps cause multiple cnodes in one allocation to go into error at the
same time.
-- scontrol show job - Correct NumNodes value calculated based upon job
specifications.
-- BGQ - Fix issue if user runs multiple sub-block jobs inside a multiple
midplane block that starts on a higher coordinate than it ends (i.e if a
block has midplanes [0010,0013] 0013 is the start even though it is
listed second in the hostlist).
-- BGQ - Add midplane to the total_cnodes used in the runjob_mux plugin
for better debug.
-- Update AllocNodes paragraph in slurm.conf.5.
* Changes in Slurm 2.6.4
========================
-- Honor ntasks-per-node option with exclusive node allocations.
-- sched/backfill - Prevent invalid memory reference if bf_continue option is
configured and slurm is reconfigured during one of the sleep cycles or if
there are any changes to the partition configuration or if the normal
scheduler runs and starts a job that the backfill scheduler is actively
working on.
-- Update man pages information about acct-freq and JobAcctGatherFrequency
to reflect only the latest supported format.
-- Minor document update to include note about PrivateData=Usage for the
slurm.conf when using the DBD.
-- Expand information reported with DebugFlags=backfill.
-- Initiate jobs pending to run in a reservation as soon as the reservation
becomes active.
-- Purged expired reservation even if it has pending jobs.
-- Corrections to calculation of a pending job's expected start time.
-- Remove some vestigial logic treating job priority of 1 as a special case.
-- Memory freeing up to avoid minor memory leaks at close of daemons
-- Updated documentation to give correct units being displayed.
-- Report AccountingStorageBackupHost with "scontrol show config".
-- init scripts ignore quotes around Pid file name specifications.
-- Fixed typo about command case in quickstart.html.
-- task/cgroup - handle new cpuset files, similar to commit c4223940.
-- Replace the tempname() function call with mkstemp().
-- Fix for --cpu_bind=map_cpu/mask_cpu/map_ldom/mask_ldom plus
--mem_bind=map_mem/mask_mem options, broken in 2.6.2.
-- Restore default behavior of allocating cores to jobs on a cyclic basis
across the sockets unless SelectTypeParameters=CR_CORE_DEFAULT_DIST_BLOCK
or user specifies other distribution options.
-- Enforce JobRequeue configuration parameter on node failure. Previously
always requeued the job.
-- acct_gather_energy/ipmi - Add delay before retry on read error.
-- select/cons_res with GRES and multiple threads per core, fix possible
infinite loop.
-- proctrack/cgroup - Add cgroup create retry logic in case one step is
starting at the same time as another step is ending and the logic to create
and delete cgroups overlaps.
-- Improve setting of job wait "Reason" field.
-- Correct sbatch documentation and job_submit/pbs plugin "%j" is job ID,
not "%J" (which is job_id.step_id).
-- Improvements to sinfo performance, especially for large numbers of
partitions.
-- SlurmdDebug - Permit changes to slurmd debug level with "scontrol reconfig"
-- smap - Avoid invalid memory reference with hidden nodes.
-- Fix sacctmgr modify qos set preempt+/-=.
-- BLUEGENE - fix issue where node count wasn't set up correctly when srun
preforms the allocation, regression in 2.6.3.
-- Add support for dependencies of job array elements (e.g.
"sbatch --depend=afterok:123_4 ...") or all elements of a job array (e.g.
"sbatch --depend=afterok:123 ...").
-- Add support for new options in sbatch qsub wrapper:
-W block=true (wait for job completion)
Clear PBS_NODEFILE environment variable
-- Fixed the MaxSubmitJobsPerUser limit in QOS which limited submissions
a job too early.
-- sched/wiki, sched/wiki2 - Fix to work with change logic introduced in
version 2.6.3 preventing Maui/Moab from starting jobs.
-- Updated the QOS limits documentation and man page.
* Changes in Slurm 2.6.3
========================
-- Add support for some new #PBS options in sbatch scripts and qsub wrapper:
-l accelerator=true|false (GPU use)
-l mpiprocs=# (processors per node)
-l naccelerators=# (GPU count)
-l select=# (node count)
-l ncpus=# (task count)
-v key=value (environment variable)
-W depend=opts (job dependencies, including "on" and "before" options)
-W umask=# (set job's umask)
-- Added qalter and qrerun commands to torque package.
-- Corrections to qstat logic: job CPU count and partition time format.
-- Add job_submit/pbs plugin to translate PBS job dependency options to the
extend possible (no support for PBS "before" options) and set some PBS
environment variables.
-- Add spank/pbs plugin to set a bunch of PBS environment variables.
-- Backported sh5util from master to 2.6 as there are some important
bugfixes and the new item extraction feature.
-- select/cons_res - Correct MacCPUsPerNode partition constraint for CR_Socket.
-- scontrol - for setdebugflags command, avoid parsing "-flagname" as an
scontrol command line option.
-- Fix issue with step accounting if a job is requeued.
-- Close file descriptors on exec of prolog, epilog, etc.
-- Fix issue when a user has held a job and then sets the begin time
into the future.
-- Scontrol - Enable changing a job's stdout file.
-- Fix issues where memory or node count of a srun job is altered while the
srun is pending. The step creation would use the old values and possibly
hang srun since the step wouldn't be able to be created in the modified
allocation.
-- Add support for new SchedulerParameters value of "bf_max_job_part", the
maximum depth the backfill scheduler should go in any single partition.
-- acct_gather/infiniband plugin - Correct packets_in/out values.
-- BLUEGENE - Don't ignore a conn-type request from the user.
-- BGQ - Force a request on a Q for a MESH to be a TORUS in a dimension that
can only be a TORUS (1).
-- Change max message length from 100MB to 1GB before generating "Insane
message length" error.
-- sched/backfill - Prevent possible memory corruption due to use of
bf_continue option and long running scheduling cycle (pending jobs could
have been cancelled and purged).
-- CRAY - fix AcceleratorAllocation depth correctly for basil 1.3
-- Created the environment variable SLURM_JOB_NUM_NODES for srun jobs and
updated the srun man page.
-- BLUEGENE/CRAY - Don't set env variables that pertain to a node when Slurm
isn't doing the launching.
-- gres/gpu and gres/mic - Do not treat the existence of an empty gres.conf
file as a fatal error.
-- Fixed for if hours are specified as 0 the time days-0:min specification
is not parsed correctly.
-- Subtract the PMII_COMMANDLEN_SIZE in contribs/pmi2/pmi2_api.c to prevent
certain implementation of snprintf() to segfault.
* Changes in Slurm 2.6.2
========================
-- Fix issue with reconfig and GrpCPURunMins
-- Fix of wrong node/job state problem after reconfig
-- Allow users who are coordinators update their own limits in the accounts
they are coordinators over.
-- BackupController - Make sure we have a connection to the DBD first thing
to avoid it thinking we don't have a cluster name.
-- Correct value of min_nodes returned by loading job information to consider
the job's task count and maximum CPUs per node.
-- If running jobacct_gather/none fix issue on unpacking step completion.
-- Reservation with CoreCnt: Avoid possible invalid memory reference.
-- sjstat - Add man page when generating rpms.
-- Make sure GrpCPURunMins is added when creating a user, account or QOS with
sacctmgr.
-- Fix for invalid memory reference due to multiple free calls caused by
job arrays submitted to multiple partitions.
-- Enforce --ntasks-per-socket=1 job option when allocating by socket.
-- Validate permissions of key directories at slurmctld startup. Report
anything that is world writable.
-- Improve GRES support for CPU topology. Previous logic would pick CPUs then
reject jobs that can not match GRES to the allocated CPUs. New logic first
filters out CPUs that can not use the GRES, next picks CPUs for the job,
and finally picks the GRES that best match those CPUs.
-- Switch/nrt - Prevent invalid memory reference when allocating single adapter
per node of specific adapter type
-- CRAY - Make Slurm work with CLE 5.1.1
-- Fix segfault if submitting to multiple partitions and holding the job.
-- Use MAXPATHLEN instead of the hardcoded value 1024 for maximum file path
lengths.
-- If OverTimeLimit is defined do not declare failed those jobs that ended
in the OverTimeLimit interval.
* Changes in Slurm 2.6.1
========================
-- slurmdbd - Allow job derived ec and comments to be modified by non-root
users.
-- Fix issue with job name being truncated to 24 chars when sending a mail
message.
-- Fix minor issues with spec file, missing files and including files
erroneously on a bluegene system.
-- sacct - fix --name and --partition options when using
accounting_storage/filetxt.
-- squeue - Remove extra whitespace of default printout.
-- BGQ - added head ppcfloor as an include dir when building.
-- BGQ - Better debug messages in runjob_mux plugin.
-- PMI2 Updated the Makefile.am to build a versioned library.
-- CRAY - Fix srun --mem_bind=local option with launch/aprun.
-- PMI2 Corrected buffer size computation in the pmi2_api.c module.
-- GRES accounting data wrong in database: gres_alloc, gres_req, and gres_used
fields were empty if the job was not started immediately.
-- Fix sbatch and srun task count logic when --ntasks-per-node specified,
but no explicit task count.
-- Corrected the hdf5 profile user guide and the acct_gather.conf
documentation.
-- IPMI - Fix Math bug getting new wattage.
-- Corrected the AcctGatherProfileType documentation in slurm.conf
-- Corrected the sh5util program to print the header in the csv file
only once, set the debug messages at debug() level, make the argument
check case insensitive and avoid printing duplicate \n.
-- If cannot collect energy values send message to the controller
to drain the node and log error slurmd log file.
-- Handle complete removal of CPURunMins time at the end of the job instead
of at multifactor poll.
-- sview - Add missing debug_flag options.
-- PGSQL - Notes about Postgres functionality being removed in the next
version of Slurm.
-- MYSQL - fix issue when rolling up usage and events happened when a cluster
was down (slurmctld not running) during that time period.
-- sched/wiki2 - Insure that Moab gets current CPU load information.
-- Prevent infinite loop in parsing configuration if including file containing
one blank line.
-- Fix pack and unpack between 2.6 and 2.5.
-- Fix job state recovery logic in which a job's accounting frequency was
not set. This would result in a value of 65534 seconds being used (the
equivalent of NO_VAL in uint16_t), which could result in the job being
requeued or aborted.
-- Validate a job's accounting frequency at submission time rather than
waiting for it's initiation to possibly fail.
-- Fix CPURunMins if a job is requeued from a failed launch.
-- Fix in accounting_storage/filetxt to correct start times which sometimes
could end up before the job started.
-- Fix issue with potentially referencing past an array in parse_time()
-- CRAY - fix issue with accelerators on a cray when parsing BASIL 1.3 XML.
-- Fix issue with a 2.5 slurmstepd locking up when talking to a 2.6 slurmd.
-- Add argument to priority plugin's priority_p_reconfig function to note
when the association and QOS used_cpu_run_secs field has been reset.
* Changes in Slurm 2.6.0
========================
-- Fix it so bluegene and serial systems don't get warnings over new NODEDATA
enum.
-- When a job is aborted send a message for any tasks that have completed.
-- Correction to memory per CPU calculation on system with threads and
allocating cores or sockets.
-- Requeue batch job if it's node reboots (used to abort the job).
-- Enlarge maximum size of srun's hostlist file.
-- IPMI - Fix first poll to get correct consumed_energy for a step.
-- Correction to job state recovery logic that could result in assert failure.
-- Record partial step accounting record if allocated nodes fail abnormally.
Francois Diakhate
committed
-- Accounting - fix issue where PrivateData=jobs or users could potentially
show information to users that had no associations on the system.
-- Make PrivateData in slurmdbd.conf case insensitive.
-- sacct/sstat - Add format option ConsumedEnergyRaw to print full energy
values.
* Changes in Slurm 2.6.0rc2
===========================
-- HDF5 - Fix issue with Ubuntu where HDF5 development headers are
overwritten by the parallel versions thus making it so we need handle
both cases.
-- ACCT_GATHER - handle suspending correctly for polling threads.
-- Make SLURM_DISTRIBUTION env var hold both types of distribution if
specified.
-- Remove hardcoded /usr/local from slurm.spec.
-- Modify slurmctld locking to improve performance under heavy load with
very large numbers of batch job submissions or job cancellations.
-- sstat - Fix issue where if -j wasn't given allow last argument to be checked
for as the job/step id.
-- IPMI - fix adjustment on poll when using EnergyIPMICalcAdjustment.
* Changes in Slurm 2.6.0rc1
===========================
-- Added helper script for launching symmetric and MIC-only MPI tasks within
SLURM (in contribs/mic/mpirun-mic).
-- Change maximum delay for state save from 2 secs to 5 secs. Make timeout
configurable at build time by defining SAVE_MAX_WAIT.
-- Modify slurmctld data structure locking to interleave read and write
locks rather than always favor write locks over read locks.
-- Added sacct format option of "ALL" to print all fields.
-- Deprecate the SchedulerParameters value of "interval" use "bf_interval"
instead as documented.
-- Add acct_gather_profile/hdf5 to profile jobs with hdf5
-- Added MaxCPUsPerNode partition configuration parameter. This can be
especially useful to schedule systems with GPUs.
-- Permit "scontrol reboot_node" for nodes in MAINT reservation.
-- Added "PriorityFlags" value of "SMALL_RELATIVE_TO_TIME". If set, the job's
size component will be based upon not the job size alone, but the job's
size divided by it's time limit.
Morris Jette
committed
-- Added sbatch option "--ignore-pbs" to ignore "#PBS" options in the batch
script.
-- Rename slurm_step_ctx_params_t field from "mem_per_cpu" to "pn_min_memory".
Job step now accepts memory specification in either per-cpu or per-node
basis.
-- Add ability to specify host repitition count in the srun hostfile (e.g.
"host1*2" is equivalent to "host1,host1").
* Changes in Slurm 2.6.0pre3
============================
-- Add milliseconds to default log message header (both RFC 5424 and ISO 8601
time formats). Disable milliseconds logging using the configure
parameter "--disable-log-time-msec". Default time format changes to
ISO 8601 (without time zone information). Specify "--enable-rfc5424time"
to restore the time zone information.
-- Add username (%u) to the filename pattern in the batch script.
-- Added options for front end nodes of AllowGroups, AllowUsers, DenyGroups,
and DenyUsers.
-- Fix sched/backfill logic to initiate jobs with maximum time limit over the
partition limit, but the minimum time limit permits it to start.
-- gres/gpu - Fix for gres.conf file with multiple files on a single line
using a slurm expression (e.g. "File=/dev/nvidia[0-1]").
-- Replaced ipmi.conf with generic acct_gather.conf file for all acct_gather
plugins. For those doing development to use this follow the model set
forth in the acct_gather_energy_ipmi plugin.
-- Added more options to update a step's information
-- Add DebugFlags=ThreadID which will print the thread id of the calling
thread.
-- CRAY - Allocate whole node (CPUs) in reservation despite what the
user requests. We have found any srun/aprun afterwards will work on a
subset of resources.
-- Do not purge inactive interactive jobs that lack a port to ping (added
for MR+ operation).
-- Advanced reservations with hostname and core counts now supports asymetric
reservations (e.g. specific different core count for each node).
-- Added slurmctld/dynalloc plugin for MapReduce+ support.
-- Added "DynAllocPort" configuration parameter.
-- Added partition paramter of SelectTypeParameters to override system-wide
value.
-- Added cr_type to partition_info data structure.
-- Added allocated memory to node information available (within the existing
select_nodeinfo field of the node_info_t data structure). Added Allocated
Memory to node information displayed by sview and scontrol commands.
-- Make sched/backfill the default scheduling plugin rather than sched/builtin
(FIFO).
Alejandro Lucero Palau
committed
-- Added support for a job having different priorities in different partitions.
-- Added new SchedulerParameters configuration parameter of "bf_continue"
which permits the backfill scheduler to continue considering jobs for
backfill scheduling after yielding locks even if new jobs have been
submitted. This can result in lower priority jobs from being backfill
scheduled instead of newly arrived higher priority jobs, but will permit
more queued jobs to be considered for backfill scheduling.
-- Added support to purge reservation records from accounting.
-- Cray - Add support for Basil 1.3
* Changes in SLURM 2.6.0pre1
============================
-- Add "state" field to job step information reported by scontrol.
-- Notify srun to retry step creation upon completion of other job steps
rather than polling. This results in much faster throughput for job step
execution with --exclusive option.
-- Added "ResvEpilog" and "ResvProlog" configuration parameters to execute a
program at the beginning and end of each reservation.
-- Added "slurm_load_job_user" function. This is a variation of
"slurm_load_jobs", but accepts a user ID argument, potentially resulting
in substantial performance improvement for "squeue --user=ID"
-- Added "slurm_load_node_single" function. This is a variation of
"slurm_load_nodes", but accepts a node name argument, potentially resulting
in substantial performance improvement for "sinfo --nodes=NAME".
-- Added "HealthCheckNodeState" configuration parameter identify node states
on which HealthCheckProgram should be executed.
-- Remove sacct --dump --formatted-dump options which were deprecated in
2.5.
-- Added support for job arrays (phase 1 of effort). See "man sbatch" option
-a/--array for details.
-- Add new AccountStorageEnforce options of 'nojobs' and 'nosteps' which will
allow the use of accounting features like associations, qos and limits but
not keep track of jobs or steps in accounting.
-- Cray - Add new cray.conf parameter of "AlpsEngine" to specify the
communication protocol to be used for ALPS/BASIL.
-- select/cons_res plugin: Correction to CPU allocation count logic in for