Newer
Older
This file describes changes in recent versions of Slurm. It primarily
documents those changes that are of interest to users and administrators.
* Changes in Slurm 15.08.8
==========================
-- Backfill scheduling properly synchronized with Cray Node Health Check.
Prior logic could result in highest priority job getting improperly
postponed.
-- Make it so daemons also support TopologyParam=NoInAddrAny.
-- If scancel is operating on large number of jobs and RPC responses from
slurmctld daemon are slow then introduce a delay in sending the cancel job
requests from scancel in order to reduce load on slurmctld.
-- Remove redundant logic when updating a job's task count.
-- MySQL - Fix querying jobs with reservations when the id's have rolled.
-- Perl - Fix use of uninitialized variable in slurm_job_step_get_pids.
-- Launch batch job requsting --reboot after the boot completes.
-- Move debug messages like "not the right user" from association manager
to debug3 when trying to find the correct association.
-- Fix incorrect logic when querying assoc_mgr information.
-- Move debug messages to debug3 notifying a gres_bit_alloc was NULL for
gres types without a file.
* Changes in Slurm 15.08.7
==========================
-- sched/backfill: If a job can not be started within the configured
backfill_window, set it's start time to 0 (unknown) rather than the end
of the backfill_window.
-- Remove the 1024-character limit on lines in batch scripts.
-- burst_buffer/cray: Round up swap size by configured granularity.
-- select/cray: Log repeated aeld reconnects.
-- task/affinity: Disable core-level task binding if more CPUs required than
available cores.
-- Preemption/gang scheduling: If a job is suspended at slurmctld restart or
reconfiguration time, then leave it suspended rather than resume+suspend.
-- Don't use lower weight nodes for job allocation when topology/tree used.
-- BGQ - If a cable goes into error state remove the under lying block on
a dynamic system and mark the block in error on a static/overlap system.
-- BGQ - Fix regression in 9cc4ae8add7f where blocks would be deleted on
static/overlap systems when some hardware issue happens when restarting
the slurmctld.
Alejandro Sanchez
committed
-- Log if CLOUD node configured without a resume/suspend program or suspend
time.
-- MYSQL - Better locking around g_qos_count which was previously unprotected.
-- Correct size of buffer used for jobid2str to avoid truncation.
Brian Christiansen
committed
-- Fix allocation/distribution of tasks across multiple nodes when
--hint=nomultithread is requested.
-- If a reservation's nodes value is "all" then track the current nodes in the
system, even if those nodes change.
-- Fix formatting if using "tree" option with sreport.
-- Make it so sreport prints out a line for non-existent TRES instead of
error message.
-- Set job's reason to "Priority" when higher priority job in that partition
(or reservation) can not start rather than leaving the reason set to
"Resources".
-- Fix memory corruption when a new non-generic TRES is added to the
DBD for the first time. The corruption is only noticed at shutdown.
-- burst_buffer/cray - Improve tracking of allocated resources to handle race
condition when reading state while buffer allocation is in progress.
-- If a job is submitted only with -c option and numcpus is updated before
the job starts update the cpus_per_task appropriately.
-- Update salloc/sbatch/srun documentation to mention time granularity.
-- Fixed memory leak when freeing assoc_mgr_info_msg_t.
-- Prevent possible use of empty reservation core bitmap, causing abort.
-- Remove unneeded pack32's from qos_rec when qos_rec is NULL.
-- Make sacctmgr print MaxJobsPerUser when adding/altering a QOS.
-- Correct dependency formatting to print array task ids if set.
-- Update sacctmgr help with current QOS options.
-- Update slurmstepd to initialize authentication before task launch.
-- burst_cray/cray: Eliminate need for dedicated nodes.
-- If no MsgAggregationParams is set don't set the internal string to
anything. The slurmd will process things correctly after the fact.
-- Fix output from api when printing job step not found.
-- Don't allow user specified reservation names to disrupt the normal
reservation sequeuece numbering scheme.
-- Fix scontrol to be able to accept TRES as an option when creating
a reservation.
-- contrib/torque/qstat.pl - return exit code of zero even with no records
printed for 'qstat -u'.
-- When a reservation is created or updated, compress user provided node names
using hostlist functions (e.g. translate user input of "Nodes=tux1,tux2"
into "Nodes=tux[1-2]").
-- Change output routines for scontrol show partition/reservation to handle
unexpectedly large strings.
-- Add more partition fields to "scontrol write config" output file.
-- Backfill scheduling fix: If a job can't be started due to a "group" resource
limit, rather than reserve resources for it when the next job ends, don't
reserve any resources for it.
-- Avoid slurmstepd abort if malloc fails during accounting gather operation.
Brian Christiansen
committed
-- Fix nodes from being overallocated when allocation straddles multiple nodes.
-- Fix memory leak in slurmctld job array logic.
Brian Christiansen
committed
-- Prevent decrementing of TRESRunMins when AccountingStorageEnforce=limits is
not set.
-- Fix backfill scheduling bug which could postpone the scheduling of jobs due
to avoidance of nodes in COMPLETING state.
-- Properly account for memory, CPUs and GRES when slurmctld is reconfigured
while there is a suspended job. Previous logic would add the CPUs, but not
memory or GPUs. This would result in underflow/overflow errors in select
cons_res plugin.
-- Strip flags from a job state in qstat wrapper before evaluating.
-- Add missing job states from the qstat wrapper.
* Changes in Slurm 15.08.6
==========================
-- In slurmctld log file, log duplicate job ID found by slurmd. Previously was
being logged as prolog/epilog failure.
-- If a job is requeued while in the process of being launch, remove it's
job ID from slurmd's record of active jobs in order to avoid generating a
duplicate job ID error when launched for the second time (which would
drain the node).
Tim Wickberg
committed
-- Cleanup messages when handling job script and environment variables in
older directory structure formats.
-- Prevent triggering gang scheduling within a partition if configured with
PreemptType=partition_prio and PreemptMode=suspend,gang.
-- Decrease parallelism in job cancel request to prevent denial of service
when cancelling huge numbers of jobs.
-- If all ephemeral ports are in use, try using other port numbers.
-- Revert way lib lua is handled when doing a dlopen, fixing a regression in
15.08.5.
Brian Christiansen
committed
-- Set the debug level of the rmdir message in xcgroup_delete() to debug2.
-- Fix the qstat wrapper when user is removed from the system but still
has running jobs.
-- Log the request to terminate a job at info level if DebugFlags includes
the Steps keyword.
-- Fix potential memory corruption in _slurm_rpc_epilog_complete as well as
_slurm_rpc_complete_job_allocation.
-- Fix cosmetic display of AccountingStorageEnforce option "nosteps" when
in use.
-- If a job can never be started due to unsatisfied job dependencies, report
the full original job dependency specification rather than the dependencies
remaining to be satisfied (typically NULL).
-- Refactor logic to synchronize active batch jobs and their script/environment
files, reducing overhead dramatically for large numbers of active jobs.
-- Avoid hard-link/copy of script/environment files for job arrays. Use the
master job record file for all tasks of the job array.
NOTE: Job arrays submitted to Slurm version 15.08.6 or later will fail if
the slurmctld daemon is downgraded to an earlier version of Slurm.
-- Move slurmctld mail handler to separate thread for improved performance.
-- Fix containment of adopted processes from pam_slurm_adopt.
-- If a pending job array has multiple reasons for being in a pending state,
then print all reasons in a comma separated list.
* Changes in Slurm 15.08.5
==========================
Brian Christiansen
committed
-- Prevent "scontrol update job" from updating jobs that have already finished.
-- Show requested TRES in "squeue -O tres" when job is pending.
-- Backfill scheduler: Test association and QOS node limits before reserving
resources for pending job.
-- burst_buffer/cray: If teardown operations fails, sleep and retry.
-- Clean up the external pids when using the PrologFlags=Contain feature
and the job finishes.
-- burst_buffer/cray: Support file staging when job lacks job-specific buffer
(i.e. only persistent burst buffers).
-- Added srun option of --bcast to copy executable file to compute nodes.
-- Fix for advanced reservation of burst buffer space.
-- BurstBuffer/cray: Add logic to terminate dw_wlm_cli child processes at
shutdown.
-- If job can't be launch or requeued, then terminate it.
-- BurstBuffer/cray: Enable clearing of burst buffer string on completed job
as a means of recovering from a failure mode.
-- Fix wrong memory free when parsing SrunPortRange=0-0 configuration.
-- BurstBuffer/cray: Fix job record purging if cancelled from pending state.
-- BGQ - Handle database throw correctly when syncing users on blocks.
-- MySQL - Make sure we don't have a NULL string returned when not
requesting any specific association.
-- sched/backfill: If max_rpc_cnt is configured and the backlog of RPCs has
not cleared after yielding locks, then continue to sleep.
-- Preserve the job dependency description displayed in 'scontrol show job'
even if the dependee jobs was terminated and cleaned causing the
dependent to never run because of DependencyNeverSatisfied.
-- Correct job task count calculation if only node count and ntasks-per-node
-- Make sure the association manager converts any string to be lower case
as all the associations from the database will be lower case.
-- Sanity check for xcgroup_delete() to verify incoming parameter is valid.
-- Fix formatting for sacct with variables that switched from uint32_t to
uint64_t.
-- Set up extern step to track any children of an ssh if it leaves anything
else behind.
-- Prevent slurmdbd divide by zero if no associations defined at rollup time.
-- Multifactor - Add sanity check to make sure pending jobs are handled
correctly when PriorityFlags=CALCULATE_RUNNING is set.
-- Add slurmdb_find_tres_count_in_string() to slurm db perl api.
-- Make lua dlopen() conditional on version found at build.
-- sched/backfill - Delay backfill scheduler for completing jobs only if
CompleteWait configuration parameter is set (make code match documentation).
-- Release a job's allocated licenses only after epilog runs on all nodes
rather than at start of termination process.
-- Cray job NHC delayed until after burst buffer released and epilog completes
on all allocated nodes.
-- Fix abort of srun if using PrologFlags=NoHold
-- Let devices step_extern cgroup inherit attributes of job cgroup.
Brian Christiansen
committed
-- Add new hook to Task plugin to be able to put adopted processes in the
step_extern cgroups.
-- Fix AllowUsers documentation in burst_buffer.conf man page. Usernames are
comma separated, not colon delimited.
-- Fix issue with time limit not being set correctly from a QOS when a job
requests no time limit.
-- In both sched/basic and backfill: If a job can not be started due to some
account/qos limit, then don't start other jobs which could delay jobs. The
old logic would skip the job and start other jobs, which could delay the
higher priority job.
-- select/cray: Prevent NHC from running more than once per job or step.
-- Fix fields not properly printed when adding an account through sacctmgr.
-- Update LBNL Node Health Check (NHC) link on FAQ.
-- Fix multifactor plugin to prevent slurmctld from getting segmentation fault
should the tres_alloc_cnt be NULL.
-- sbatch/salloc - Move nodelist logic before the time min_nodes is used
so we can set it correctly before tasks are set.
* Changes in Slurm 15.08.4
==========================
-- Fix typo for the "devices" cgroup subsystem in pam_slurm_adopt.c
-- Fix TRES_MAX flag to work correctly.
-- Added burst_buffer.conf flag parameter of "TeardownFailure" which will
teardown and remove a burst buffer after failed stage-in or stage-out.
By default, the buffer will be preserved for analysis and manual teardown.
-- Prevent a core dump in srun if the signal handler runs during the job
allocation causing the step context to be NULL.
-- Don't fail job if multiple prolog operations in progress at slurmctld
restart time.
-- Burst_buffer/cray: Fix to purge terminated jobs with burst buffer errors.
-- Burst_buffer/cray: Don't stall scheduling of other jobs while a stage-in
is in progress.
-- Make it possible to query 'extern' step with sstat.
-- Make 'extern' step show up in the database.
-- MYSQL - Quote assoc table name in mysql query.
-- Make SLURM_ARRAY_TASK_MIN, SLURM_ARRAY_TASK_MAX, and SLURM_ARRAY_TASK_STEP
environment variables available to PrologSlurmctld and EpilogSlurmctld.
-- Fix slurmctld bug in which a pending job array could be canceled
by a user different from the owner or the administrator.
-- Support taking node out of FUTURE state with "scontrol reconfig" command.
-- Sched/backfill: Fix to properly enforce SchedulerParameters of
bf_max_job_array_resv.
-- Enable operator to reset sdiag data.
-- jobcomp/elasticsearch plugin: Add array_job_id and array_task_id fields.
-- Remove duplicate #define IS_NODE_POWER_UP.
-- Added SchedulerParameters option of max_script_size.
-- Add REQUEST_ADD_EXTERN_PID option to add pid to the slurmstepd's extern
step.
Brian Christiansen
committed
-- Add unique identifiers to anchor tags in HTML generated from the man pages.
-- Add with_freeipmi option to spec file.
-- Minor elasticsearch code improvements
* Changes in Slurm 15.08.3
==========================
-- Correct Slurm's RPM build if Munge is not installed.
-- Job array termination status email ExitCode based upon highest exit code
from any task in the job array rather than the last task. Also change the
state from "Ended" or "Failed" to "Mixed" where appropriate.
-- Squeue recombines pending job array records only if their name and partition
are identical.
-- Fix some minor leaks in the job info and step info API.
-- Export missing QOS id when filling in association with the association
manager.
-- Fix invalid reference if a lua job_submit plugin references a default qos
when a user doesn't exist in the database.
-- Use association enforcement in the lua plugin.
-- Fix a few spots missing defines of accounting_enforce or acct_db_conn
in the plugins.
-- Show requested TRES in scontrol show jobs when job is pending.
-- Improve sched/backfill support for job features, especially XOR construct.
-- Correct scheduling logic for job features option with XOR construct that
could delay a job's initiation.
-- Remove unneeded frees when creating a tres string.
-- Send a tres_alloc_str for the batch step
-- Fix incorrect check for slurmdb_find_tres_count_in_string in various places,
it needed to check for INFINITE64 instead of zero.
-- Don't allow scontrol to create partitions with the name "DEFAULT".
-- burst_buffer/cray: Change error from "invalid request" to "permssion denied"
if a non-authorized user tries to create/destroy a persistent buffer.
-- PrologFlags work: Setting a flag of "Contain" implicitly sets the "Alloc"
flag. Fix code path which could prevent execution of the Prolog when the
"Alloc" or "Contain" flag were set.
-- Fix for acct_gather_energy/cray|ibmaem to work with missed enum.
-- MYSQL - When inserting a job and begin_time is 0 do not set it to
submit_time. 0 means the job isn't eligible yet so we need to treat it so.
-- MYSQL - Don't display ineligible jobs when querying for a window of time.
-- Fix creation of advanced reservation of cores on nodes which are DOWN.
-- Return permission denied if regular user tries to release job held by an
administrator.
-- MYSQL - Fix rollups for multiple jobs running by the same association
in an hour counting multiple times.
-- Burstbuffer/Cray plugin - Fix for persistent burst buffer use.
-- Modifications to pam_slurm_adopt to work correctly for the "extern" step.
-- Alphabetize debugflags when printing them out.
-- Fix systemd's slurmd service from killing slurmstepds on shutdown.
-- Fixed counter of not indexed jobs, error_cnt post-increment changed to
pre-increment.
* Changes in Slurm 15.08.2
==========================
-- Fix for tracking node state when jobs that have been allocated exclusive
access to nodes (i.e. entire nodes) and later relinquish some nodes. Nodes
would previously appear partly allocated and prevent use by other jobs.
-- Correct some cgroup paths ("step_batch" vs. "step_4294967294", "step_exter"
vs. "step_extern", and "step_extern" vs. "step_4294967295").
-- Fix advanced reservation core selection logic with network topology.
-- MYSQL - Remove restriction to have to be at least an operator to query TRES
values.
-- For pending jobs have sacct print 0 for nnodes instead of the bogus 2.
-- Fix for tracking node state when jobs that have been allocated exclusive
access to nodes (i.e. entire nodes) and later relinquish some nodes. Nodes
would previously appear partly allocated and prevent use by other jobs.
-- Fix updating job in db after extending job's timelimit past partition's
timelimit.
-- Fix srun -I<timeout> from flooding the controller with step create requests.
-- Requeue/hold batch job launch request if job already running (possible if
node went to DOWN state, but jobs remained active).
-- If a job's CPUs/task ratio is increased due to configured MaxMemPerCPU,
then increase it's allocated CPU count in order to enforce CPU limits.
-- Don't mark powered down node as not responding. This could be triggered by
race condition of the node suspend and ping logic, preventing use of the
node.
-- Don't requeue RPC going out from slurmctld to DOWN nodes (can generate
repeating communication errors).
-- Propagate sbatch "--dist=plane=#" option to srun.
-- Add acct_gather_energy/ibmaem plugin for systems with IBM Systems Director
Active Energy Manager.
-- Fix spec file to look for mariadb or mysql devel packages for build
requirements.
-- MySQL - Improve the code with asking for jobs in a suspended state.
-- Fix slurcmtld allowing root to see job steps using squeues -s.
-- Do not send burst buffer stage out email unless the job uses burst buffers.
-- Fix sacct to not return all jobs if the -j option is given with a trailing
','.
-- Permit job_submit plugin to set a job's priority.
-- Fix occasional srun segfault.
-- Fix issue with sacct, printing 0_0 for array's that had finished in the
database but the start record hadn't made it yet.
-- sacctmgr - Don't allow default account associations to be removed
from a user.
-- Fix sacct -j, (nothing but a comma) to not return all jobs.
-- Fixed slurmctld not sending cold-start messages correctly to the database
when a cold-start (-c) happens to the slurmctld.
Brian Christiansen
committed
-- Fix case where if the backup slurmdbd has existing connections when it gives
up control that the it would be killed.
-- Fix task/cgroup affinity to work correctly with multi-socket
single-threaded cores. A regression caused only 1 socket to be used on
this kind of node instead of all that were available.
-- MYSQL - Fix minor issue after an index was added to the database it would
previously take 2 restarts of the slurmdbd to make it stick correctly.
-- Add hv_to_qos_cond() and qos_rec_to_hv() functions to the Perl interface.
-- Add new burst_buffer.conf parameters: ValidateTimeout and OtherTimeout.
See man page for details.
-- Fix burst_buffer/cray support for interactive allocations >4GB.
-- Correct backfill scheduling logic for job with INFINITE time limit.
-- Fix issue on a scontrol reconfig all available GRES/TRES would be zeroed
out.
Brian Christiansen
committed
-- Set SLURM_HINT environment variable when --hint is used with sbatch or
salloc.
-- Add scancel -f/--full option to signal all steps including batch script and
all of its child processes.
-- Fix salloc -I to accept an argument.
-- Avoid reporting more allocated CPUs than exist on a node. This can be
triggered by resuming a previosly suspended job, resulting in
oversubscription of CPUs.
-- Fix the pty window manager in slurmstepd not to retry IO operation with
srun if it read EOF from the connection with it.
-- sbatch --ntasks option to take precedence over --ntasks-per-node plus node
count, as documented. Set SLURM_NTASKS/SLURM_NPROCS environment variables
accordingly.
-- MYSQL - Make sure suspended time is only subtracted from the CPU TRES
as it is the only TRES that can be given to another job while suspended.
-- Clarify how TRESBillingWeights operates on memory and burst buffers.
* Changes in Slurm 15.08.1
==========================
-- Fix test21.30 and 21.34 to check grpwall better.
-- Add time to the partition QOS the job is running on instead of just the
job QOS.
-- Print usage for GrpJobs, GrpSubmitJobs and GrpWall even if there is no
limit.
-- If AccountingEnforce=safe is set make sure a job can finish before going
over the limit with grpwall on a QOS or association.
-- burst_buffer/cray - Major updates based upon recent Cray changes.
-- Improve job state reason string when required nodes not available.
-- Fix missing else when packing an update partition message
Brian Christiansen
committed
-- Fix srun from inheriting the SLURM_CPU_BIND and SLURM_MEM_BIND environment
variables when running in an existing srun (e.g. an srun within an salloc).
-- Fix missing else when packing an update partition message.
-- Use more flexible mechnanism to find json installation.
-- Make sure safe_limits was initialized before processing limits in the
slurmctld.
-- Fix for burst_buffer/cray to parse type option correctly.
-- Fix memory error and version number in the nonstop plugin and reservation
code.
-- When requesting GRES in a step check for correct variable for the count.
-- Fix issue with GRES in steps so that if you have multiple exclusive steps
and you use all the GRES up instead of reporting the configuration isn't
available you hold the requesting step until the GRES is available.
-- MYSQL - Change debug to print out with DebugFlags=DB_Step instead of debug4
-- Simplify code when user is selecting a job/step/array id and removed
anomaly when only asking for 1 (task_id was never set to INFINITE).
-- MYSQL - If user is requesting various task_ids only return requested steps.
-- Fix issue when tres cnt for energy is 0 for total reported.
-- Resolved scalability issues of power adaptive scheduling with layouts.
-- Burst_buffer/cray bug - Fix teardown race condition that can result in
infinite loop.
-- Job "--reboot" option automatically, set's exclusive node mode.
-- Fix memory leak when using PrologFlags=Alloc.
-- Fix truncation of job reason in squeue.
-- If a node is in DOWN or DRAIN state, leave it unavailable for allocation
when powered down.
-- Update the slurm.conf man page documenting better nohold_on_prolog_fail
variable.
-- Don't trucate task ID information in "squeue --array/-r" or "sview".
-- Fix a bug which caused scontrol to core dump when releasing or
holding a job by name.
-- Fix unit conversion bug in slurmd which caused wrong memory calculation
for cgroups.
-- Fix issue with GRES in steps so that if you have multiple exclusive steps
and you use all the GRES up instead of reporting the configuration isn't
available you hold the requesting step until the GRES is available.
-- Fix slurmdbd backup to use DbdAddr when contacting the primary.
-- Fix error in MPI documentation.
-- Fix to handle arrays with respect to number of jobs submitted. Previously
only 1 job was accounted (against MaxSubmitJob) for when an array was
submitted.
-- Correct counting for job array limits, job count limit underflow possible
when master cancellation of master job record.
-- Combine 2 _valid_uid_gid functions into a single function to avoid
diversion.
-- Pending job array records will be combined into single line by default,
even if started and requeued or modified.
-- Fix sacct --format=nnodes to print out correct information for pending
jobs.
-- Make is so 'scontrol update job 1234 qos='' will set the qos back to
the default qos for the association.
-- Add [Alloc|Req]Nodes to sacct to be more like cpus.
-- Fix sacct documentation about [Alloc|Req]TRES
-- Put node count in TRES string for steps.
-- Fix issue with wrong protocol version when using the srun --no-allocate
option.
-- Fix TRES counts on GRES on a clean start of the slurmctld.
-- Add ability to change a job array's maximum running task count:
"scontrol update jobid=# arraytaskthrottle=#"
* Changes in Slurm 15.08.0
==========================
-- Fix issue with frontend systems (outside ALPs or BlueGene) where srun
wouldn't get the correct protocol version to launch a step.
-- Fix for message aggregation return rpcs where none of the messages are
intended for the head of the tree.
-- Fix segfault in sreport when there was no response from the dbd.
-- ALPS - Fix compile to not link against -ljob and -lexpat with every lib
or binary.
-- Fix testing for CR_Memory when CR_Memory and CR_ONE_TASK_PER_CORE are used
with select/linear.
-- When restarting or reconfiging the slurmctld, if job is completing handle
accounting correctly to avoid meaningless errors about overflow.
-- Add AccountingStorageTRES to scontrol show config
-- MySQL - Fix minor memory leak if a connection ever goes away whist using it.
-- ALPS - Make it so srun --hint=nomultithread works correctly.
-- Make MaxTRESPerUser work in sacctmgr.
-- Fix handling of requeued jobs with steps that are still finishing.
-- Cleaner copy for PriorityWeightTRES, it also fixes a core dump when trying
to free it otherwise.
-- Add environment variables SLURM_ARRAY_TASK_MAX, SLURM_ARRAY_TASK_MIN,
SLURM_ARRAY_TASK_STEP for job arrays.
-- Fix srun to use the NoInAddrAny TopologyParam option.
-- Change QOS flag name from PartitionQOS to OverPartQOS to be a better
description.
-- Make complete_batch_script RPC work with message aggregation.
-- Do not count slurmctld threads waiting in a "throttle" lock against the
daemon's thread limit as they are not contending for resources.
-- Modify slurmctld outgoing RPC logic to support more parallel tasks (up to
85 RPCs and 256 pthreads; the old logic supported up to 21 RPCs and 256
threads). This change can dramatically improve performance for RPCs
operating on small node counts.
-- Increase total backfill scheduler run time in stats_info_response_msg data
structure from 32 to 64 bits in order to prevent overflow.
-- Add NoInAddrAny option to TopologyParam in the slurm.conf which allows to
bind to the interface of return of gethostname instead of any address on
the node which avoid RSIP issues in Cray systems. This is most likely
useful in other systems as well.
-- Fix memory leak in Slurm::load_jobs perl api call.
-- Added --noconvert option to sacct, sstat, squeue and sinfo which allows
values to be displayed in their original unit types (e.g. 2048M won't be
converted to 2G).
-- Fix spelling of node_rescrs to node_resrcs in Perl API.
-- Fix node state race condition, UNKNOWN->IDLE without configuration info.
-- Cray: Disable LDAP references from slurmstepd on job launch due for
improved scalability.
-- Remove srun "read header error" due to application termination race
condition.
-- Optimize sacct queries with additional db indexes.
-- Add SLURM_TOPO_LEN env variable for scontrol show topology.
-- Add free_mem to node information.
-- Fix abort of batch launch if prolog is running, wait for prolog instead.
Brian Christiansen
committed
-- Fix case where job would get the wrong cpu count when using
--ntasks-per-core and --cpus-per-task together.
-- Add TRESBillingWeights to partitions in slurm.conf which allows taking into
consideration any TRES Type when calculating the usage of a job.
-- Add PriorityWeightTRES slurm.conf option to be able to configure priority
factors for TRES types.
* Changes in Slurm 15.08.0pre6
==============================
-- Add scontrol options to view and modify layouts tables.
-- Add MsgAggregationParams which controls a reverse tree to the slurmctld
which can be used to aggregate messages to the slurmctld into a single
message to reduce communication to the slurmctld. Currently only epilog
complete messages and node registration messages use this logic.
-- Add sacct and squeue options to print trackable resources.
-- Add sacctmgr option to display trackable resources.
-- If an salloc or srun command is executed on a "front-end" configuration,
that job will be assigned a slurmd shepherd daemon on the same host as used
to execute the command when possible rather than an slurmd daemon on an
arbitrary front-end node.
-- Add srun --accel-bind option to control how tasks are bound to GPUs and NIC
Generic RESources (GRES).
-- gres/nic plugin modified to set OMPI_MCA_btl_openib_if_include environment
variable based upon allocated devices (usable with OpenMPI and Melanox).
-- Make it so info options for srun/salloc/sbatch print with just 1 -v instead
of 4.
-- Add "no_backup_scheduling" SchedulerParameter to prevent jobs from being
scheduled when the backup takes over. Jobs can be submitted, modified and
cancelled while the backup is in control.
-- Enable native Slurm backup controller to reside on an external Cray node
when the "no_backup_scheduling" SchedulerParameter is used.
-- Removed TICKET_BASED fairshare. Consider using the FAIR_TREE algorithm.
-- Disable advanced reservation "REPLACE" option on IBM Bluegene systems.
-- Add support for control distribution of tasks across cores (in addition
to existing support for nodes and sockets, (e.g. "block", "cyclic" or
"fcyclic" task distribution at 3 levels in the hardware rather than 2).
-- Create db index on <cluster>_assoc_table.acct. Deleting accounts that didn't
have jobs in the job table could take a long time.
-- The performance of Profiling with HDF5 is improved. In addition, internal
structures are changed to make it easier to add new profile types,
particularly energy sensors. sh5util will continue to work with either
format.
-- Add partition information to sshare output if the --partition option
is specified on the sshare command line.
-- Add sreport -T/--tres option to identify Trackable RESources (TRES) to
report.
-- Display job in sacct when single step's cpus are different from the job
allocation.
-- Add association usage information to "scontrol show cache" command output.
-- MPI/MVAPICH plugin now requires Munge for authentication.
-- job_submit/lua: Add default_qos fields. Add job record qos. Add partition
record allow_qos and qos_char fields.
* Changes in Slurm 15.08.0pre5
==============================
-- Add jobcomp/elasticsearch plugin. Libcurl is required for build. Configure
the server as follows: "JobCompLoc=http://YOUR_ELASTICSEARCH_SERVER:9200".
-- Scancel logic large re-written to better support job arrays.
-- Added a slurm.conf parameter PrologEpilogTimeout to control how long
-- Added TRES (Trackable resources) to track Mem, GRES, license, etc
utilization.
-- Add re-entrant versions of glibc time functions (e.g. localtime) to Slurm
in order to eliminate rare deadlock of slurmstepd fork and exec calls.
-- Constrain kernel memory (if available) in cgroups.
-- Add PrologFlags option of "Contain" to create a proctrack container at
job resource allocation time.
-- Disable the OOM Killer in slurmd and slurmstepd's memory cgroup when using
MemSpecLimit.
* Changes in Slurm 15.08.0pre4
==============================
-- Burst_buffer/cray - Convert logic to use new commands/API names (e.g.
"dws_setup" rather than "bbs_setup").
-- Remove the MinJobAge size limitation. It can now exceed 65533 as it
is represented using an unsigned integer.
-- Verify that all plugin version numbers are identical to the component
attempting to load them. Without this verification, the plugin can reference
Slurm functions in the caller which differ (e.g. the underlying function's
arguments could have changed between Slurm versions).
NOTE: All plugins (except SPANK) must be built against the identical
version of Slurm in order to be used by any Slurm command or daemon. This
should eliminate some very difficult to diagnose problems due to use of old
plugins.
-- Increase the MAX_PACK_MEM_LEN define to avoid PMI2 failure when fencing
with large amount of ranks (to 1GB).
-- Requests by normal user to reset a job priority (even to lower it) will
result in an error saying to change the job's nice value instead.
-- SPANK naming changes: For environment variables set using the
spank_job_control_setenv() function, the values were available in the
slurm_spank_job_prolog() and slurm_spank_job_epilog() functions using
getenv where the name was given a prefix of "SPANK_". That prefix has
been removed for consistency with the environment variables available in
the Prolog and Epilog scripts.
-- Add "TopologyParam" configuration parameter. Optional value of "dragonfly"
is supported.
-- Optimize resource allocation for systems with dragonfly networks.
-- Add "--thread-spec" option to salloc, sbatch and srun commands. This is
the count of threads reserved for system use per node.
-- job_submit/lua: Enable reading and writing job environment variables.
For example: if (job_desc.environment.LANGUAGE == "en_US") then ...
-- Added two new APIs slurm_job_cpus_allocated_str_on_node_id()
and slurm_job_cpus_allocated_str_on_node() to print the CPUs id
allocated to a job.
-- Specialized memory (a node's MemSpecLimit configuration parameter) is not
available for allocation to jobs.
-- Modify scontrol update job to allow jobid specification without
the = sign. 'scontrol update job=123 ...' and 'scontrol update job 123 ...'
are both valid syntax.
-- Archive a month at a time when there are lots of records to archive.
-- Introduce new sbatch option '--kill-on-invalid-dep=yes|no' which allows
users to specify which behavior they want if a job dependency is not
satisfied.
-- Add Slurmdb::qos_get() interface to perl api.
-- If a job fails to start set the requeue reason to be:
job requeued in held state.
-- Implemented a new MPI key,value PMIX_RING() exchange algorithm as
an alternative to PMI2.
Brian Christiansen
committed
-- Remove possible deadlocks in the slurmctld when the slurmdbd is busy
archiving/purging.
-- Add DB_ARCHIVE debug flag for filtering out debug messages in the slurmdbd
when the slurmdbd is archiving/purging.
-- Fix some power_save mode issues: Parsing of SuspendTime in slurm.conf was
bad, powered down nodes would get set non-responding if there was an
in-flight message, and permit nodes to be powered down from any state.
-- Initialize variables in consumable resource plugin to prevent core dump.
* Changes in Slurm 15.08.0pre3
==============================
-- CRAY - addition of acct_gather_energy/cray plugin.
-- Add job credential to "Run Prolog" RPC used with a configuration of
PrologFlags=alloc. This allows the Prolog to be passed identification of
GPUs allocated to the job.
-- Add SLURM_JOB_CONSTAINTS to environment variables available to the Prolog.
-- Added "--mail=stage_out" option to job submission commands to notify user
when burst buffer state out is complete.
-- Require a "Reason" when using scontrol to set a node state to DOWN.
-- Mail notifications on job BEGIN, END and FAIL now apply to a job array as a
whole rather than generating individual email messages for each task in the
job array.
-- task/affinity - Fix memory binding to NUMA with cpusets.
Brian Christiansen
committed
-- Display job's estimated NodeCount based off of partition's configured
resources rather than the whole system's.
-- Add AuthInfo option of "cred_expire=#" to specify the lifetime of a job
step credential. The default value was changed from 1200 to 120 seconds.
-- Set the delay time for job requeue to the job credential lifetime (120
seconds by default). This insures that prolog runs on every node when a
job is requeued. (This change will slow down launch of re-queued jobs).
-- Add AuthInfo option of "cred_expire=#" to specify the lifetime of a job
step credential.
-- Remove srun --max-launch-time option. The option has not been functional
since Slurm version 2.0.
-- Add sockets and cores to TaskPluginParams' autobind option.
-- Added LaunchParameters configuration parameter. Have srun command test
locally for the executable file if LaunchParameters=test_exec or the
environment variable SLURM_TEST_EXEC is set. Without this an invalid
command will generate one error message per task launched.
-- Fix the slurm /etc/init.d script to return 0 upon stopping the
daemons and return 1 in case of failure.
-- Add the ability for a compute node to be allocated to multiple jobs, but
restricted to a single user. Added "--exclusive=user" option to salloc,
sbatch and srun commands. Added "owner" field to node record, visible using
the scontrol and sview commands. Added new partition configuration parameter
"ExclusiveUser=yes|no".
* Changes in Slurm 15.08.0pre2
==============================
-- Add the environment variables SLURM_JOB_ACCOUNT, SLURM_JOB_QOS
and SLURM_JOB_RESERVATION in the batch/srun jobs.
-- Properly enforce partition Shared=YES option. Previously oversubscribing
resources required gang scheduling to be configured.
-- Enable per-partition gang scheduling resource resolution (e.g. the partition
can have SelectTypeParameters=CR_CORE, while the global value is CR_SOCKET).
-- Make it so a newer version of a slurmstepd can talk to an older srun.
Brian Christiansen
committed
allocation. Nodes could have been added while waiting for an allocation.
-- Expanded --cpu-freq parameters to include min-max:governor specifications.
--cpu-freq now supported on salloc and sbatch.
-- Add support for optimized job allocations with respect to SGI Hypercube
topology.
NOTE: Only supported with select/linear plugin.
NOTE: The program contribs/sgi/netloc_to_topology can be used to build
Slurm's topology.conf file.
-- Remove 64k validation of incoming RPC nodelist size. Validated at 64MB
when unpacking.
-- In slurmstepd() add the user primary group if it is not part of the
groups sent from the client.
-- Added BurstBuffer field to advanced reservations.
-- For advanced reservation, replace flag "License_only" with flag "Any_Nodes".
It can be used to indicate the an advanced reservation resources (licenses
and/or burst buffers) can be used with any compute nodes.
-- Allow users to specify the srun --resv-ports as 0 in which case no ports
will be reserved. The default behaviour is to allocate one port per task.
-- Interpret a partition configuration of "Nodes=ALL" in slurm.conf as
including all nodes defined in the cluster.
-- Added new configuration parameters PowerParameters and PowerPlugin.
-- Added power management plugin infrastructure.
-- If job already exceeded one of its QOS/Accounting limits do not
return error if user modifies QOS unrelated job settings.
-- When caching user ids of AllowGroups use both getgrnam_r() and getgrent_r()
then remove eventual duplicate entries.
-- Remove rpm dependency between slurm-pam and slurm-devel.
-- Remove support for the XCPU (cluster management) package.
-- Add Slurmdb::jobs_get() interface to perl api.
-- Performance improvement when sending data from srun to stepds when
processing fencing.
-- Add the feature to specify arbitrary field separator when running
sacct -p or sacct -P. The command line option is --separator.
-- Introduce slurm.conf parameter to use Proportional Set Size (PSS) instead
of RSS to determinate the memory footprint of a job.
Add an slurm.conf option not to kill jobs that is over memory limit.
-- Add job submission command options: --sicp (available for inter-cluster
dependencies) and --power (specify power management options) to salloc,
sbatch, and srun commands.
-- Add DebugFlags option of SICP (inter-cluster option logging).
-- In order to support inter-cluster job dependencies, the MaxJobID
configuration parameter default value has been reduced from 4,294,901,760
to 2,147,418,112 and it's maximum value is now 2,147,463,647.
ANY JOBS WITH A JOB ID ABOVE 2,147,463,647 WILL BE PURGED WHEN SLURM IS
UPGRADED FROM AN OLDER VERSION!
-- Add QOS name to the output of a partition in squeue/scontrol/sview/smap.
* Changes in Slurm 15.08.0pre1
==============================
-- Add sbcast support for file transfer to resources allocated to a job step
rather than a job allocation.
-- Change structures with association in them to assoc to save space.
-- Add support for job dependencies jointed with OR operator (e.g.
"--depend=afterok:123?afternotok:124").
-- Add "--bb" (burst buffer specification) option to salloc, sbatch, and srun.
-- Added configuration parameters BurstBufferParameters and BurstBufferType.
-- Added burst_buffer plugin infrastructure (needs many more functions).
-- Make it so when the fanout logic comes across a node that is down we abandon
the tree to avoid worst case scenarios when the entire branch is down and
we have to try each serially.
-- Add better error reporting of invalid partitions at submission time.
-- Move will-run test for multiple clusters from the sbatch code into the API
so that it can be used with DRMAA.
-- If a non-exclusive allocation requests --hint=nomultithread on a
CR_CORE/SOCKET system lay out tasks correctly.
-- Avoid including unused CPUs in a job's allocation when cores or sockets are
allocated.
-- Added new job state of STOPPED indicating processes have been stopped with a
SIGSTOP (using scancel or sview), but retain its allocated CPUs. Job state
returns to RUNNING when SIGCONT is sent (also using scancel or sview).
-- Added EioTimeout parameter to slurm.conf. It is the number of seconds srun
waits for slurmstepd to close the TCP/IP connection used to relay data
between the user application and srun when the user application terminates.
-- Remove slurmctld/dynalloc plugin as the work was never completed, so it is
not worth the effort of continued support at this time.
-- Remove DynAllocPort configuration parameter.
-- Add advance reservation flag of "replace" that causes allocated resources
to be replaced with idle resources. This maintains a pool of available
resources that maintains a constant size (to the extent possible).
-- Added SchedulerParameters option of "bf_busy_nodes". When selecting
resources for pending jobs to reserve for future execution (i.e. the job
can not be started immediately), then preferentially select nodes that are
in use. This will tend to leave currently idle resources available for
backfilling longer running jobs, but may result in allocations having less
than optimal network topology. This option is currently only supported by
the select/cons_res plugin.
-- Permit "SuspendTime=NONE" as slurm.conf value rather than only a numeric
value to match "scontrol show config" output.
-- Add the 'scontrol show cache' command which displays the associations
in slurmctld.
-- Test more frequently for node boot completion before starting a job.
Provides better responsiveness.
-- Permit PreemptType=qos and PreemptMode=suspend,gang to be used together.
A high-priority QOS job will now oversubscribe resources and gang schedule,
but only if there are insufficient resources for the job to be started
without preemption. NOTE: That with PreemptType=qos, the partition's
Shared=FORCE:# configuration option will permit one job more per resource
to be run than than specified, but only if started by preemption.
-- Remove the CR_ALLOCATE_FULL_SOCKET configuration option. It is now the
default.
-- Fix a race condition in PMI2 when fencing counters can be out of sync.
-- Increase the MAX_PACK_MEM_LEN define to avoid PMI2 failure when fencing
with large amount of ranks.
-- Add QOS option to a partition. This will allow a partition to have
all the limits a QOS has. If a limit is set in both QOS the partition
QOS will override the job's QOS unless the job's QOS has the
OverPartQOS flag set.
-- The task_dist_states variable has been split into "flags" and "base"
components. Added SLURM_DIST_PACK_NODES and SLURM_DIST_NO_PACK_NODES values
to give user greater control over task distribution. The srun --dist options
has been modified to accept a "Pack" and "NoPack" option. These options can
be used to override the CR_PACK_NODE configuration option.
* Changes in Slurm 14.11.12
===========================
-- Correct dependency formatting to print array task ids if set.
-- Fix for configuration of "AuthType=munge" and "AuthInfo=socket=..." with
alternate munge socket path.
* Changes in Slurm 14.11.11
===========================
-- Fix systemd's slurmd service from killing slurmstepds on shutdown.
-- Fix the qstat wrapper when user is removed from the system but still
has running jobs.
-- Log the request to terminate a job at info level if DebugFlags includes
the Steps keyword.
-- Fix potential memory corruption in _slurm_rpc_epilog_complete as well as
_slurm_rpc_complete_job_allocation.
-- Fix incorrectly sized buffer used by jobid2str which will cause buffer
overflow in slurmctld. (Bug 2295.)
* Changes in Slurm 14.11.10
===========================
-- Fix truncation of job reason in squeue.
-- If a node is in DOWN or DRAIN state, leave it unavailable for allocation
when powered down.
-- Update the slurm.conf man page documenting better nohold_on_prolog_fail
variable.
-- Don't trucate task ID information in "squeue --array/-r" or "sview".
-- Fix a bug which caused scontrol to core dump when releasing or
holding a job by name.
-- Fix unit conversion bug in slurmd which caused wrong memory calculation
for cgroups.
-- Fix issue with GRES in steps so that if you have multiple exclusive steps
and you use all the GRES up instead of reporting the configuration isn't
available you hold the requesting step until the GRES is available.
-- Fix slurmdbd backup to use DbdAddr when contacting the primary.
-- Fix to handle arrays with respect to number of jobs submitted. Previously
only 1 job was accounted (against MaxSubmitJob) for when an array was
submitted.
-- Correct counting for job array limits, job count limit underflow possible
when master cancellation of master job record.
-- For pending jobs have sacct print 0 for nnodes instead of the bogus 2.
-- Fix for tracking node state when jobs that have been allocated exclusive
access to nodes (i.e. entire nodes) and later relinquish some nodes. Nodes
would previously appear partly allocated and prevent use by other jobs.
Brian Christiansen
committed
-- Fix updating job in db after extending job's timelimit past partition's
timelimit.
Brian Christiansen
committed
-- Fix srun -I<timeout> from flooding the controller with step create requests.
-- Requeue/hold batch job launch request if job already running (possible if
node went to DOWN state, but jobs remained active).
-- If a job's CPUs/task ratio is increased due to configured MaxMemPerCPU,
then increase it's allocated CPU count in order to enforce CPU limits.
-- Don't mark powered down node as not responding. This could be triggered by
race condition of the node suspend and ping logic.
-- Don't requeue RPC going out from slurmctld to DOWN nodes (can generate
repeating communication errors).
-- Propagate sbatch "--dist=plane=#" option to srun.
-- Fix sacct to not return all jobs if the -j option is given with a trailing
','.
-- Permit job_submit plugin to set a job's priority.
-- Fix issue with sacct, printing 0_0 for array's that had finished in the
database but the start record hadn't made it yet.
-- Fix sacct -j, (nothing but a comma) to not return all jobs.
-- Prevent slurmstepd from core dumping if /proc/<pid>/stat has
unexpected format.
* Changes in Slurm 14.11.9
==========================
-- Correct "sdiag" backfill cycle time calculation if it yields locks. A
microsecond value was being treated as a second value resulting in an
overflow in the calcuation.
-- Fix segfault when updating timelimit on jobarray task.
-- Fix to job array update logic that can result in a task ID of 4294967294.
-- Fix of job array update, previous logic could fail to update some tasks
of a job array for some fields.
-- CRAY - Fix seg fault if a blade is replaced and slurmctld is restarted.
-- Fix plane distribution to allocate in blocks rather than cyclically.
-- squeue - Remove newline from job array ID value printed.
-- squeue - Enable filtering for job state SPECIAL_EXIT.
-- Prevent job array task ID being inappropriately set to NO_VAL.
-- MYSQL - Make it so you don't have to restart the slurmctld
to gain the correct limit when a parent account is root and you
remove a subaccount's limit which exists on the parent account.
-- MYSQL - Close chance of setting the wrong limit on an association
when removing a limit from an association on multiple clusters
at the same time.
-- MYSQL - Fix minor memory leak when modifying an association but no
change was made.
-- srun command line of either --mem or --mem-per-cpu will override both the
SLURM_MEM_PER_CPU and SLURM_MEM_PER_NODE environment variables.
-- Prevent slurmctld abort on update of advanced reservation that contains no
nodes.
Danny Auble
committed
-- ALPS - Revert commit 2c95e2d22 which also removes commit 2e2de6a4 allowing
cray with the SubAllocate option to work as it did with 2.5.
-- Properly parse CPU frequency data on POWER systems.
-- Correct sacct.a man pages describing -i option.
-- Capture salloc/srun information in sdiag statistics.
-- Fix bug in node selection with topology optimization.
Nathan Yee
committed
-- Read in correct number of nodes from SLURM_HOSTFILE when specifying nodes
and --distribution=arbitrary.
-- Fix segfault in Bluegene setups where RebootQOSList is defined in
bluegene.conf and accounting is not setup.
-- MYSQL - Update mod_time when updating a start job record or adding one.
-- MYSQL - Fix issue where if an association id ever changes on at least a
portion of a job array is pending after it's initial start in the
database it could create another row for the remain array instead
of using the already existing row.
-- Fix scheduling anomaly with job arrays submitted to multiple partitions,
jobs could be started out of priority order.
-- If a host has suspened jobs do not reboot it. Reboot only hosts
with no jobs in any state.
-- ALPS - Fix issue when using --exclusive flag on srun to do the correct
thing (-F exclusive) instead of -F share.
-- Fix a bug in the controller which display jobs in CF state as RUNNING.
-- Preserve advanced _core_ reservation when nodes added/removed/resized on
slurmctld restart. Rebuild core_bitmap as needed.
-- Fix for non-standard Munge port location for srun/pmi use.
-- Fix gang scheduling/preemption issue that could cancel job at startup.
-- Fix a bug in squeue which prevented squeue -tPD to print array jobs.
Brian Christiansen
committed
-- Sort job arrays in job queue according to array_task_id when priorities are
equal.
-- Fix segfault in sreport when there was no response from the dbd.
-- ALPS - Fix compile to not link against -ljob and -lexpat with every lib
or binary.
Brian Christiansen
committed
-- Fix testing for CR_Memory when CR_Memory and CR_ONE_TASK_PER_CORE are used
with select/linear.
-- MySQL - Fix minor memory leak if a connection ever goes away whist using it.
-- ALPS - Make it so srun --hint=nomultithread works correctly.
-- Prevent job array task ID from being reported as NO_VAL if last task in the
array gets requeued.
-- Fix some potential deadlock issues when state files don't exist in the
association manager.
-- Correct RebootProgram logic when executed outside of a maintenance
reservation.
-- Requeue job if possible when slurmstepd aborts.
* Changes in Slurm 14.11.8
==========================
-- Eliminate need for user to set user_id on job_update calls.
-- Correct list of unavailable nodes reported in a job's "reason" field when
that job can not start.
-- Map job --mem-per-cpu=0 to --mem=0.
-- Fix squeue -o %m and %d unit conversion to Megabytes.
-- Fix issue with incorrect time calculation in the priority plugin when
a job runs past it's time limit.
-- Prevent users from setting job's partition to an invalid partition.
-- Fix sreport core dump when requesting
'job SizesByAccount grouping=individual'.
-- select/linear: Correct count of CPUs allocated to job on system with
hyperthreads.
Brian Christiansen
committed
-- Fix race condition where last array task might not get updated in the db.
-- CRAY - Remove libpmi from rpm install
-- Fix squeue -o %X output to correctly handle NO_VAL and suffix.
-- When deleting a job from the system set the job_id to 0 to avoid memory
corruption if thread uses the pointer basing validity off the id.
-- Fix issue where sbatch would set ntasks-per-node to 0 making any srun
afterward cause a divide by zero error.
-- switch/cray: Refine logic to set PMI_CRAY_NO_SMP_ENV environment variable.
-- When sacctmgr loads archives with version less than 14.11 set the array
task id to NO_VAL, so sacct can display the job ids correctly.
-- When using memory cgroup if a task uses more memory than requested
the failures are logged into memory.failcnt count file by cgroup
and the user is notified by slurmstepd about it.
-- Fix scheduling inconsistency with GRES bound to specific CPUs.
-- If user belongs to a group which has split entries in /etc/group
search for its username in all groups.
-- Do not consider nodes explicitly powered up as DOWN with reason of "Node
unexpected rebooted".
-- Use correct slurmd spooldir when creating cpu-frequency locks.
-- Note that TICKET_BASED fairshare will be deprecated in the future. Consider
using the FAIR_TREE algorithm instead.
-- Set job's reason to BadConstaints when job can't run on any node.
-- Prevent abort on update of reservation with no nodes (licenses only).
-- Prevent slurmctld from dumping core if job_resrcs is missing in the
job data structure.
-- Fix squeue to print array task ids according to man page when
SLURM_BITSTR_LEN is defined in the environment.
-- In squeue, sort jobs based on array job ID if available.
-- Fix the calculation of job energy by not including the NO_VAL values.
-- Advanced reservation fixes: enable update of bluegene reservation, avoid
abort on multi-core reservations.
-- Set the totalview_stepid to the value of the job step instead of NO_VAL.
-- Fix slurmdbd core dump if the daemon does not have connection with
the database.
-- Display error message when attempting to modify priority of a held job.
-- Backfill scheduler: The configured backfill_interval value (default 30
seconds) is now interpretted as a maximum run time for the backfill
scheduler. Once reached, the scheduler will build a new job queue and
start over, even if not all jobs have been tested.
-- Backfill scheduler now considers OverTimeLimit and KillWait configuration
parameters to estimate when running jobs will exit.
-- Correct task layout with CR_Pack_Node option and more than 1 CPU per task.
-- Fix the scontrol man page describing the release argument.
-- When job QOS is modified, do so before attempting to change partition in
order to validate the partition's Allow/DenyQOS parameter.
* Changes in Slurm 14.11.7
==========================
-- Initialize some variables used with the srun --no-alloc option that may
cause random failures.
-- Add SchedulerParameters option of sched_min_interval that controls the
minimum time interval between any job scheduling action. The default value
is zero (disabled).
-- Change default SchedulerParameters=max_sched_time from 4 seconds to 2.
-- Refactor scancel so that all pending jobs are cancelled before starting
cancellation of running jobs. Otherwise they happen in parallel and the
pending jobs can be scheduled on resources as the running jobs are being