NEWS

 -- Improve scheduling logic with respect to license use and node reboots.
 -- CRAY - Alter algorithm to come up with the SLURM_ID_HASH.
 -- Implement federated scheduling and federated status outputs.
 -- The '-q' option to srun has changed from being the short form of
    '--quit-on-interrupt' to '--qos'.
 -- Change sched_min_interval default from 0 to 2 microseconds.

* Changes in Slurm 17.02.12
==========================
 -- Fix segfault in slurmdbd hourly rollup when having a job outside a
    reservation, with no end_time set, from an assoc that's in a reservation.

* Changes in Slurm 17.02.11
==========================
 -- Fix insecure handling of user_name and gid fields. CVE-2018-10995.

* Changes in Slurm 17.02.10
==========================
 -- Fix updating of requested TRES memory.
 -- Cray modulefile: avoid removing /usr/bin from path on module unload.
 -- Fix issue when resetting the partition pointers on nodes.
 -- Show reason field in 'sinfo -R' when nodes is marked as failed.
 -- Fix potential of slurmstepd segfaulting when the extern step fails to start.
 -- Allow nodes state to be updated between FAIL and DRAIN.
 -- Avoid registering a job'd credential multiple times.
 -- Fix sbatch --wait to stop waiting after job is gone from memory.
 -- Fix memory leak of MailDomain configuration string when slurmctld daemon is
    reconfigured.
 -- Fix to properly remove extern steps from the starting_steps list.
 -- Fix Slurm to work correctly with HDF5 1.10+.
 -- Add support in salloc/srun --bb option for "access_mode" in addition to
    "access" for consistency with DW options.
 -- Fix potential deadlock in _run_prog() in power save code.
 -- MYSQL - Add dynamic_offset in the database to force range for auto
    increment ids for the tres_table.
 -- Avoid setting node in COMPLETING state indefinitely if the job initiating
    the node reboot is cancelled while the reboot in in progress.
 -- node_feature/knl_cray - Fix memory leaks that occur when slurmctld
    reconfigured.
 -- node_feature/knl_cray - Fix memory leak that can occur during normal
    operation.
 -- Fix job array dependency with "aftercorr" option and some task arrays in
    the first job fail. This fix lets all task array elements that can run
    proceed rather than stopping all subsequent task array elements.
 -- Fix whole node allocation cpu counts when --hint=nomultihtread.
 -- NRT - Fix issue when running on a HFI (p775) system with multiple protocols.
 -- Fix uninitialized variables when unpacking slurmdb_archive_cond_t.
 -- Fix security issue in accounting_storage/mysql plugin by always escaping
    strings within the slurmdbd. CVE-2018-7033.

* Changes in Slurm 17.02.9
==========================
 -- When resuming powered down nodes, mark DOWN nodes right after ResumeTimeout
    has been reached (previous logic would wait about one minute longer).
 -- Fix sreport not showing full column name for TRES Count.
 -- Fix slurmdb_reservations_get() giving wrong usage data when job's spanned
    reservation that was modified.
 -- Fix sreport reservation utilization report showing bad data.
 -- Show all TRES' on a reservation in sreport reservation utilization report by
    default.
 -- Fix sacctmgr show reservation handling "end" parameter.
 -- Work around issue with sysmacros.h and gcc7 / glibc 2.25.
 -- Fix layouts code to only allow setting a boolean.
 -- Fix sbatch --wait to keep waiting even if a message timeout occurs.
 -- CRAY - If configured with NodeFeatures=knl_cray and there are non-KNL
    nodes which include no features the slurmctld will abort without
    this patch when attemping strtok_r(NULL).
 -- Fix regression in 17.02.7 which would run the spank_task_privileged as
    part of the slurmstepd instead of it's child process.
 -- Fix security issue in Prolog and Epilog by always prepending SPANK_ to
    all user-set environment variables. CVE-2017-15566.

* Changes in Slurm 17.02.8
==========================
 -- Add 'slurmdbd:' to the accounting plugin to notify message is from dbd
    instead of local.
 -- mpi/mvapich - Buffer being only partially cleared. No failures observed.
 -- Fix for job --switch option on dragonfly network.
 -- In salloc with --uid option, drop supplementary groups before changing UID.
 -- jobcomp/elasticsearch - strip any trailing slashes from JobCompLoc.
 -- jobcomp/elasticsearch - fix memory leak when transferring generated buffer.
 -- Prevent slurmstepd ABRT when parsing gres.conf CPUs.
 -- Fix sbatch --signal to signal all MPI ranks in a step instead of just those
    on node 0.
 -- Check multiple partition limits when scheduling a job that were previously
    only checked on submit.
 -- Cray: Avoid running application/step Node Health Check on the external
    job step.
 -- Optimization enhancements for partition based job preemption.
 -- Address some build warnings from GCC 7.1, and one possible memory leak if
    /proc is inaccessible.
 -- If creating/altering a core based reservation with scontrol/sview on a
    remote cluster correctly determine the select type.
 -- Fix autoconf test for libcurl when clang is used.
 -- Fix default location for cgroup_allowed_devices_file.conf to use correct
    default path.
 -- Document NewName option to sacctmgr.
 -- Reject a second PMI2_Init call within a single step to prevent slurmstepd
    from hanging.
 -- Handle old 32bit values stored in the database for requested memory
    correctly in sacct.
 -- Fix memory leaks in the task/cgroup plugin when constraining devices.
 -- Make extremely verbose info messages debug2 messages in the task/cgroup
    plugin when constraining devices.
 -- Fix issue that would deny the stepd access to /dev/null where GRES has a
    'type' but no file defined.
 -- Fix issue where the slurmstepd would fatal on job launch if you have no
    gres listed in your slurm.conf but some in gres.conf.
 -- Fix validating time spec to correctly validate various time formats.
 -- Make scontrol work correctly with job update timelimit [+|-]=.
 -- Reduce the visibily of a number of warnings in _part_access_check.
 -- Prevent segfault in sacctmgr if no association name is specified for
    an update command.
 -- burst_buffer/cray plugin modified to work with changes in Cray UP05
    software release.
 -- Fix job reasons for jobs that are violating assoc MaxTRESPerNode limits.
 -- Fix segfault when unpacking a 16.05 slurm_cred in a 17.02 daemon.
 -- Fix setting TRES limits with case insensitive TRES names.
 -- Add alias for xstrncmp() -- slurm_xstrncmp().
 -- Fix sorting of case insensitive strings when using xstrcasecmp().
 -- Gracefully handle race condition when reading /proc as process exits.
 -- Avoid error on Cray duplicate setup of core specialization.
 -- Skip over undefined (hidden in Slurm) nodes in pbsnodes.
 -- Add empty hashes in perl api's slurm_load_node() for hidden nodes.
 -- CRAY - Add rpath logic to work for the alpscomm libs.
 -- Fixes for administrator extended TimeLimit (job reason & time limit reset).
 -- Fix gres selection on systems running select/linear.
 -- sview: Added window decorator for maximize,minimize,close buttons for all
    systems.
 -- squeue: interpret negative length format specifiers as a request to
    delimit values with spaces.
 -- Fix the torque pbsnodes wrapper script to parse a gres field with a type
    set correctly.

* Changes in Slurm 17.02.7
==========================
 -- Fix deadlock if requesting to create more than 10000 reservations.
 -- Fix potential memory leak when creating partition name.
 -- Execute the HealthCheckProgram once when the slurmd daemon starts rather
    than executing repeatedly until an exit code of 0 is returned.
 -- Set job/step start and end times to 0 when using --truncate and start > end.
 -- Make srun --pty option ignore EINTR allowing windows to resize.
 -- When resuming node only send one message to the slurmdbd.
 -- Modify srun --pty option to use configured SrunPortRange range.
 -- Fix issue with whole gres not being printed out with Slurm tools.
 -- Fix issue with multiple jobs from an array are prevented from starting.
 -- Fix for possible slurmctld abort with use of salloc/sbatch/srun
    --gres-flags=enforce-binding option.
 -- Fix race condition when using jobacct_gather/cgroup where the memory of the
    step wasn't always gathered correctly.
 -- Better debug when slurmdbd queue is filling up in the slurmctld.
 -- Fixed truncation on scontrol show config output.
 -- Serialize updates from from the dbd to the slurmctld.
 -- Fix memory leak in slurmctld when agent queue to the DBD has filled up.
 -- CRAY - Throttle step creation if trying to create too many steps at once.
 -- If failing after switch_g_job_init happened make sure switch_g_job_fini is
    called.
 -- Fix minor memory leak if launch fails in the slurmstepd.
 -- Fix issue where UnkillableStepProgram if step was in an ending state.
 -- Fix bug when tracking multiple simultaneous spawned ping cycles.
 -- jobcomp/elasticsearch plugin now saves state of pending requests on
    slurmctld daemon shutdown so then can be recovered on restart.
 -- Fix issue when an alternate munge key when communicating on a persistent
    connection.
 -- Document inconsistent behavior of GroupUpdateForce option.
 -- Fix bug in selection of GRES bound to specific CPUs where the GRES count
    is 2 or more. Previous logic could allocate CPUs not available to the job.
 -- Increase buffer to handle long /proc/<pid>/stat output so that Slurm can
    read correct RSS value and take action on jobs using more memory than
    requested.
 -- Fix srun job jobs that can run immediately to run in the highest priority
    partion when multiple partitions are listed. scontrol show jobs can
    potentially show the partition list in priority order.
 -- Fix starting controller if StateSaveLocation path didn't exist.
 -- Fix inherited association 'max' TRES limits combining multiple limits in
    the tree.
 -- Sort TRES id's on limits when getting them from the database.
 -- Fix issue with pmi[2|x] when TreeWidth=1.
 -- Correct buffer size used in determining specialized cores to avoid possible
    truncation of core specification and not reserving the specified cores.
 -- Close race condition on Slurm structures when setting DebugFlags.
 -- Make it so the cray/switch plugin grabs new DebugFlags on a reconfigure.
 -- Fix incorrect lock levels when creating or updating a reservation.
 -- Fix overlapping reservation resize.
 -- Add logic to help support Dell KNL systems where syscfg is different than
    the normal Intel syscfg.
 -- CRAY - Fix BB to handle type= correctly, regression in 17.02.6.

* Changes in Slurm 17.02.6
==========================
 -- Fix configurator.easy.html to output the SelectTypeParameters line.
 -- If a job requests a specific memory requirement then gets something else
    from the slurmctld make sure the step allocation is made aware of it.
 -- Fix missing initialization in slurmd.
 -- Fix potential degradation when running HTC (> 100 jobs a sec) like
    workflows through the slurmd.
 -- Fix race condition which could leave a stepd hung on shutdown.
 -- CRAY - Add configuration for ATP to the ansible play script.
 -- Fix potential to corrupt DBD message.
 -- burst_buffer logic modified to support sizes in both SI and EIC size units
    (e.g. M/MiB for powers of 1024, MB for powers of 1000).

* Changes in Slurm 17.02.5
==========================
 -- Prevent segfault if a job was blocked from running by a QOS that is then
    deleted.
 -- Improve selection of jobs to preempt when there are multiple partitions
    with jobs subject to preemption.
 -- Only set kmem limit when ConstrainKmemSpace=yes is set in cgroup.conf.
 -- Fix bug in task/affinity that could result in slurmd fatal error.
 -- Increase number of jobs that are tracked in the slurmd as finishing at one
    time.
 -- Note when a job finishes in the slurmd to avoid a race when launching a
    batch job takes longer than it takes to finish.
 -- Improve slurmd startup on large systems (> 10000 nodes)
 -- Add LaunchParameters option of cray_net_exclusive to control whether all
    jobs on the cluster have exclusive access to their assigned nodes.
 -- Make sure srun inside an allocation gets --ntasks-per-[core|socket]
    set correctly.
 -- Only make the extern step at job creation.
 -- Fix for job step task layout with --cpus-per-task option.
 -- Fix --ntasks-per-core option/environment variable parsing to set
    the requested value, instead of always setting one (srun).
 -- Correct error message when ClusterName in configuration files does not match
    the name in the slurmctld daemon's state save file.
 -- Better checking when a job is finishing to avoid underflow on job's
    submitted to a QOS/association.
 -- Handle partition QOS submit limits correctly when a job is submitted to
    more than 1 partition or when the partition is changed with scontrol.
 -- Performance boost for when Slurm is dealing with credentials.
 -- Fix race condition which could leave a stepd hung on shutdown.
 -- Add lua support for opensuse.

* Changes in Slurm 17.02.4
==========================
 -- Do not attempt to schedule jobs after changing the power cap if there are
    already many active threads.
 -- Job expansion example in FAQ enhanced to demonstrate operation in
    heterogeneous environments.
 -- Prevent scontrol crash when operating on array and no-array jobs at once.
 -- knl_cray plugin: Log incomplete capmc output for a node.
 -- knl_cray plugin: Change capmc parsing of mcdram_pct from string to number.
 -- Remove log files from test20.12.
 -- When rebooting a node and using the PrologFlags=alloc make sure the
    prolog is ran after the reboot.
 -- node_features/knl_generic - If a node is rebooted for a pending job, but
    fails to enter the desired NUMA and/or MCDRAM mode then drain the node and
    requeue the job.
 -- node_features/knl_generic disable mode change unless RebootProgram
    configured.
 -- Add new burst_buffer function bb_g_job_revoke_alloc() to be executed
    if there was a failure after the initial resource allocation. Does not
    release previously allocated resources.
 -- Test if the node_bitmap on a job is NULL when testing if the job's nodes
    are ready.  This will be NULL is a job was revoked while beginning.
 -- Fix incorrect lock levels when testing when job will run or updating a job.
 -- Add missing locks to job_submit/pbs plugin when updating a jobs
    dependencies.
 -- Add support for lua5.3
 -- Add min_memory_per_node|cpu to the job_submit/lua plugin to deal with lua
    not being able to deal with pn_min_memory being a uint64_t.  Scripts are
    urged to change to these new variables avoid issue.  If not set the
    variables will be 'nil'.
 -- Calculate priority correctly when 'nice' is given.
 -- Fix minor typos in the documentation.
 -- node_features/knl_cray: Preserve non-KNL active features if slurmctld
    reconfigured while node boot in progress.
 -- node_features/knl_generic: Do not repeatedly log errors when trying to read
    KNL modes if not KNL system.
 -- Add missing QOS read lock to backfill scheduler.
 -- When doing a dlopen on liblua only attempt the version compiled against.
 -- Fix null-dereference in sreport cluster ulitization when configured with
    memory-leak-debug.
 -- Fix Partition info in 'scontrol show node'. Previously duplicate partition
    names, or Partitions the node did not belong to could be displayed.
 -- Fix it so the backup slurmdbd will take control correctly.
 -- Fix unsafe use of MAX() macro, which could result in problems cleaning up
    accounting plugins in slurmd, or repeat job cancellation attempts in
    scancel.
 -- Fix 'scontrol update reservation duration=unlimited' to set the duration
    to 365-days (as is done elsewhere), rather than 49710 days.
 -- Check if variable given to scontrol show job is a valid jobid.
 -- Fix WithSubAccounts option to not include WithDeleted unless requested.
 -- Prevent a job tested on multiple partitions from being marked
    WHOLE_NODE_USER.
 -- Prevent a race between completing jobs on a user-exclusive node from
    leaving the node owned.
 -- When scheduling take the nodes in completing jobs out of the mix to reduce
    fragmentation.  SchedulerParameters=reduce_completing_frag
 -- For jobs submited to multiple partitions, report the job's earliest start
    time for any partition.
 -- Backfill partitions that use QOS Grp limits to "float" better.
 -- node_features/knl_cray: don't clear configured GRES from non-KNL node.
 -- sacctmgr - prevent segfault in command when a request is denied due
    to a insufficient priviledges.
 -- Add warning about libcurl-devel not being installed during configure.
 -- Streamline job purge by handling file deletion on a separate thread.
 -- Always set RLIMIT_CORE to the maximum permitted for slurmd, to ensure
    core files are created even on non-developer builds.
 -- Fix --ntasks-per-core option/environment variable parsing to set
    the requested value, instead of always setting one.
 -- If trying to cancel a step that hasn't started yet for some reason return
    a good return code.
 -- Fix issue with sacctmgr show where user=''

* Changes in Slurm 17.02.3
==========================
 -- Increase --cpu_bind and --mem_bind field length limits.
 -- Fix segfault when using AdminComment field with job arrays.
 -- Clear Dependency field when all dependencies are satisfied.
 -- Add --array-unique to squeue which will display one unique pending job
    array element per line.
 -- Reset backfill timers correctly without skipping over them in certain
    circumstances.
 -- When running the "scontrol top" command, make sure that all of the user's
    jobs have a priority that is lower than the selected job. Previous logic
    would permit other jobs with equal priority (no jobs with higher priority).
 -- Fix perl api so we always get an allocation when calling Slurm::new().
 -- Fix issue with cleaning up cpuset and devices cgroups when multiple steps
    end at the same time.
 -- Document that PriorityFlags option of DEPTH_OBLIVIOUS precludes the use of
    FAIR_TREE.
 -- Fix issue if an invalid message came in a Slurm daemon/command may abort.
 -- Make it impossible to use CR_CPU* along with CR_ONE_TASK_PER_CORE. The
    options are mutually exclusive.
 -- ALPS - Fix scheduling when ALPS doesn't agree with Slurm on what nodes
    are free.
 -- When removing a partition make sure it isn't part of a reservation.
 -- Fix seg fault if loading attempting to load non-existent burstbuffer plugin.
 -- Fix to backfill scheduling with respect to QOS and association limits. Jobs
    submitted to multiple partitions are most likley to be effected.
 -- sched/backfill: Improve assoc_limit_stop configuration parameter support.
 -- CRAY - Add ansible play and README.
 -- sched/backfill: Fix bug related to advanced reservations and the need to
    reboot nodes to change KNL mode.
 -- Preempt plugins - fix check for 'preempt_youngest_first' option.
 -- Preempt plugins - fix incorrect casts in preempt_youngest_first mode.
 -- Preempt/job_prio - fix incorrect casts in sort function.
 -- Fix to make task/affinity work with ldoms where there are more than 64
    cpus on the node.
 -- When using node_features/knl_generic make it so the slurmd doesn't segfault
    when shutting down.
 -- Fix potential double-xfree() when using job arrays that can lead to
    slurmctld crashing.
 -- Fix priority/multifactor priorities on a slurmctld restart if not using
    accounting_storage/[mysql|slurmdbd].
 -- Fix NULL dereference reported by CLANG.
 -- Update proctrack documentation to strongly encourage use of
    proctrack/cgroup.
 -- Fix potential memory leak if job fails to begin after nodes have been
    selected for a job.
 -- Handle a job that made it out of the select plugin without a job_resrcs
    pointer.
 -- Fix potential race condition when persistent connections are being closed at
    shutdown.
 -- Fix incorrect locks levels when submitting a batch job or updating a job
    in general.
 -- CRAY - Move delay waiting for job cleanup to after we check once.
 -- MYSQL - Fix memory leak when loading archived jobs into the database.
 -- Fix potential race condition when starting the priority/multifactor plugin's
    decay thread.
 -- Sanity check to make sure we have started a job in acct_policy.c before we
    clear it as started.
 -- Allow reboot program to use arguments.
 -- Message Aggr - Remove race condition on slurmd shutdown with respects to
    destroying a mutex.
 -- Fix updating job priority on multiple partitions to be correct.
 -- Don't remove admin comment when updating a job.
 -- Return error when bad separator is given for scontrol update job licenses.

* Changes in Slurm 17.02.2
==========================
 -- Update hyperlink to LBNL Node Health Check program.
 -- burst_buffer/cray - Add support for line continuation.
 -- If a job is cancelled by the user while it's allocated nodes are being
    reconfigured (i.e. the capmc_resume program is rebooting nodes for the job)
    and the node reconfiguration fails (i.e. the reboot fails), then don't
    requeue the job but leave it in a cancelled state.
 -- capmc_resume (Cray resume node script) - Do not disable changing a node's
    active features if SyscfgPath is configured in the knl.conf file.
 -- Improve the srun documentation for the --resv-ports option.
 -- burst_buffer/cray - Fix parsing for discontinuous allocated nodes. A job
    allocation of "20,22" must be expressed as "20\n22".
 -- Fix rare segfault when shutting down slurmctld and still sending data to
    the database.
 -- Fix gres output of a job if it is updated while pending to be displayed
    correctly with Slurm tools.
 -- Fix pam_slurm_adopt.
 -- Fix missing unlock when job_list doesn't exist when starting priority/
    multifactor.
 -- Fix segfault if slurmctld is shutting down and the slurmdbd plugin was
    in the middle of setting db_indexes.
 -- Add ESLURM_JOB_SETTING_DB_INX to errno to note when a job can't be updated
    because the dbd is setting a db_index.
 -- Fix possible double insertion into database when a job is updated at the
    moment the dbd is assigning a db_index.
 -- Fix memory error when updating a job's licenses.
 -- Fix seff to work correctly with non-standard perl installs.
 -- Export missing slurmdbd_defs_[init|fini] needed for libslurmdb.so to work.
 -- Fix sacct from returning way more than requested when querying against a job
    array task id.
 -- Fix double read lock of tres when updating gres or licenses on a job.
 -- Make sure locks are always in place when calling
    assoc_mgr_make_tres_str_from_array.
 -- Prevent slurmctld SEGV when creating reservation with duplicated name.
 -- Consider QOS flags Partition[Min|Max]Nodes when doing backfill.
 -- Fix slurmdbd_defs.c to not have half symbols go to libslurm.so and the
    other half go to libslurmdb.so.
 -- Fix 'scontrol show jobs' to remove an errant newline when 'Switches' is
    printed.
 -- Better code for handling memory required by a task on a heterogeneous
    system.
 -- Fix regression in 17.02.0 with respects to GrpTresMins on a QOS or
    Association.
 -- Cleanup to make make dist work.
 -- Schedule interactive jobs quicker.
 -- Perl API - correct value of MEM_PER_CPU constant to correctly handle
    memory values.
 -- Fix 'flags' variable to be 32 bit from the old 16 bit value in the perl api.
 -- Export sched_nodes for a job in the perl api.
 -- Improve error output when updating a reservation that has already started.
 -- Fix --ntasks-per-node issue with srun so DenyOnLimit would work correctly.
 -- node_features/knl_cray plugin - Fix memory leak.
 -- Fix wrong cpu_per_task count issue on heterogeneous system when dealing with
    steps.
 -- Fix double free issue when removing usage from an association with sacctmgr.
 -- Fix issue with SPANK plugins attempting to set null values as environment
    variables, which leads to the command segfaulting on newer glibc versions.
 -- Fix race condition on slurmctld startup when plugins have not gone through
    init() ahead of the rpc_manager processing incoming messages.
 -- job_submit/lua - expose admin_comment field.
 -- Allow AdminComment field to be set by the job_submit plugin.
 -- Allow AdminComment field to be changed by any Administrator.
 -- Fix key words in jobcomp select.
 -- MYSQL - Streamline job flush sql when doing a clean start on the slurmctld.
 -- Fix potential infinite loop when talking to the DBD when shutting down
    the slurmctld.
 -- Fix MCS filter.
 -- Make it so pmix can be included in the plugin rpm without having to
    specify --with-pmix.
 -- MYSQL - Fix initial load when not using he DBD.
 -- Fix scontrol top to not make jobs priority 0 (held).
 -- Downgrade info message about exceeding partition time limit to a debug2.

* Changes in Slurm 17.02.1-2
============================
 -- Replace clock_gettime with time(NULL) for very old systems without the call.

* Changes in Slurm 17.02.1
==========================
 -- Modify pam module to work when configured NodeName and NodeHostname differ.
 -- Update to sbatch/srun man pages to explain the "filename pattern" clearer
 -- Add %x to sbatch/srun filename pattern to represent the job name.
 -- job_submit/lua - Add job "bitflags" field.
 -- Update slurm.spec file to note obsolete RPMs.
 -- Fix deadlock scenario when dumping configuration in the slurmctld.
 -- Remove unneeded job lock when running assoc_mgr cache.  This lock could
    cause potential deadlock when/if TRES changed in the database and the
    slurmctld wasn't made aware of the change.  This would be very rare.
 -- Fix missing locks in gres logic to avoid potential memory race.
 -- If gres is NULL on a job don't try to process it when returning detailed
    information about a job to scontrol.
 -- Fix print of consumed energy in sstat when no energy is being collected.
 -- Print formatted tres string when creating/updating a reservation.
 -- Fix issues with QOS flags Partition[Min|Max]Nodes to work correctly.
 -- Prevent manipulation of the cpu frequency and governor for batch or
    extern steps. This addresses an issue where the batch step would
    inadvertently set the cpu frequency maximum to the minimum value
    supported on the node.
 -- Convert a slurmctd power management data structure from array to list in
    order to eliminate the possibility of zombie child suspend/resume
    processes.
 -- Burst_buffer/cray - Prevent slurmctld daemon abort if "paths" operation
    fails. Now job will be held. Update job update time when held.
 -- Fix issues with QOS flags Partition[Min|Max]Nodes to work correctly.
 -- Refactor slurmctld agent logic to eliminate some pthreads.
 -- Added "SyscfgTimeout" parameter to knl.conf configuration file.
 -- Fix for CPU binding for job steps run under a batch job.

* Changes in Slurm 17.02.0
==========================
 -- job_submit/lua - Make "immediate" parameter available.
 -- Fix srun I/O race condtion to eliminate a error message that might be
    generated if the application exits with outstanding stdin.
 -- Fix regression when purging/archiving jobs/events.
 -- Add new job state JOB_OOM indicating Out Of Memory condition as detected
    by task/cgroup plugin.
 -- If QOS has been added to the system go refigure out Deny/AllowQOS on
    partitions.
 -- Deny job with duplicate GRES requested.
 -- Fix loading super old assoc_mgr usage without segfaulting.
 -- CRAY systems: Restore TaskPlugins order of task/cray before task/cgroup.
 -- Task/cray: Treat missing "mems" cgroup with "debug" messages rather than
    "error" messages. The file may be missing at step termination due to a
    change in how cgroups are released at job/step end.
 -- Fix for job constraint specification with counts, --ntasks-per-node value,
    and no node count.
 -- Fix ordering of step task allocation to fill in a socket before going into
    another one.
 -- Fix configure to not require C++
 -- job_submit/lua - Remove access to slurmctld internal reservation fields of
    job_pend_cnt and job_run_cnt.
 -- Prevent job_time_limit enforcement from blocking other internal operations
    if a large number of jobs need to be cancelled.
 -- Add 'preempt_youngest_order' option to preempt/partition_prio plugin.
 -- Fix controller being able to talk to a pre-released DBD.
 -- Added ability to override the invoking uid for "scontrol update job"
    by specifying "--uid=<uid>|-u <uid>".
 -- Changed file broadcast "offset" from 32 to 64 bits in order to support files
    over 2 GB.
 -- slurm.spec - do not install init scripts alongside systemd service files.

* Changes in Slurm 17.02.0rc1
==============================
 -- Add port info to 'sinfo' and 'scontrol show node'.
 -- Fix errant definition of USE_64BIT_BITSTR which can lead to core dumps.
 -- Move BatchScript to end of each job's information when using
    "scontrol -dd show job" to make it more readable.
 -- Add SchedulerParameters configuration parameter of "default_gbytes", which
    treats numeric only (no suffix) value for memory and tmp disk space as being
    in units of Gigabytes. Mostly for compatability with LSF.
 -- Fix race condtion in srun/sattach logic which would prevent srun from
    terminating.
 -- Bitstring operations are now 64bit instead of 32bit.
 -- Replace hweight() function in bitstring with faster version.
 -- scancel would treat a non-numeric argument as the name of jobs to be
    cancelled (a non-documented feature). Cancelling jobs by name now require
    the "--jobname=" command line argument.
 -- scancel modified to note that no jobs satisfy the filter options when the
    --verbose option is used along with one or more job filters (e.g. "--qos=").
 -- Change _pack_cred to use pack_bit_str_hex instead of pack_bit_fmt for
    better scalability and performance.
 -- Add BootTime configuration parameter to knl.conf file to optimize resource
    allocations with respect to required node reboots.
 -- Add node_features_p_boot_time() to node_features plugin to optimize
    scheduling with respect to node reboots.
 -- Avoid allocating resources to a job in the event that its run time plus boot
    time (if needed) extent into an advanced reservation.
 -- Burst_buffer/cray - Avoid stage-out operation if job never started.
 -- node_features/knl_cray - Add capability to detected Uncorrectable Memory
    Errors (UME) and if detected then log the event in all job and step stderr
    with a message of the form:
    error: *** STEP 1.2 ON tux1 UNCORRECTABLE MEMORY ERROR AT 2016-12-14T09:09:37 ***
    Similar logic added to node_features/knl_generic in version 17.02.0pre4.
 -- If job is allocated nodes which are powered down, then reset job start time
    when the nodes are ready and do not charge the job for power up time.
 -- Add the ability to purge transactions from the database.
 -- Add support for requeue'ing of federated jobs (BETA).
 -- Add support for interactive federated jobs (BETA).
 -- Add the ability to purge rolled up usage from the database.
 -- Properly set SLURM_JOB_GPUS environment variable for Prolog.

* Changes in Slurm 17.02.0pre4
==============================
 -- Add support for per-partitiion OverTimeLimit configuration.
 -- Add --mem_bind option of "sort" to run zonesort on KNL nodes at step start.
 -- Add LaunchParameters=mem_sort option to configure running of zonesort
    by default at step startup.
 -- Add "FreeSpace" information for each pool to the "scontrol show burstbuffer"
    output. Required changes to the burst_buffer_info_t data structure.
 -- Add new node state flag of NODE_STATE_REBOOT for node reboots triggered by
    "scontrol reboot" commands. Previous logic re-used NODE_STATE_MAINT flag,
    which could lead to inconsistencies. Add "ASAP" option to "scontrol reboot"
    command that will drain a node in order to reboot it as soon as possible,
    then return it to service.
 -- Allow unit conversion routine to convert 1024M to 1G.
 -- switch/cray plugin - change legacy spool directory location.
 -- Add new PriorityFlags option of INCR_ONLY, which prevents a job's priority
    from being decremented.
 -- Make it so we don't purge job start messages until after we purge step
    messages.  Hopefully this will reduce the number of messages lost when
    filling up memory when the database/DBD is down.
 -- Added SchedulingParameters option of "bf_job_part_count_reserve". Jobs below
    the specified threshold will not have resources reserved for them.
 -- If GRES are configured with file IDs, then "scontrol -d show node" will
    not only identify the count of currently allocated GRES, but their specific
    index numbers (e.g. "GresUsed=gpu:alpha:2(IDX:0,2),gpu:beta:0(IDX:N/A)").
    Ditto for job information with "scontrol -d show job".
 -- Add new mcs/account plugin.
 -- Add "GresEnforceBind=Yes" to "scontrol show job" output if so configured.
 -- Add support for SALLOC_CONSTRAINT, SBATCH_CONSTRAINT and SLURM_CONSTRAINT
    environment variables to set default constraints for salloc, sbatch and
    srun commands respectively.
 -- Provide limited support for the MemSpecLimit configuration parameter without
    the task/cgroup plugin.
 -- node_features/knl_generic - Add capability to detected Uncorrectable Memory
    Errors (UME) and if detected then log the event in all job and step stderr
    with a message of the form:
    error: *** STEP 1.2 ON tux1 UNCORRECTABLE MEMORY ERROR AT 2016-12-14T09:09:37 ***
 -- Add SLURM_JOB_GID to TaskProlog environment.
 -- burst_buffer/cray - Remove leading zeros from node ID lists passed to
    dw_wlm_cli program.
 -- Add "Partitions" field to "scontrol show node" output.
 -- Remove sched/wiki and sched/wiki2 plugins and associated code.
 -- Remove SchedulerRootFilter option and slurm_get_root_filter() API call.
 -- Add SchedulerParameters option of spec_cores_first to select specialized
    cores from the lowest rather than highest number cores and sockets.
 -- Add PrologFlags option of Serial to disable concurrent launch of
    Prolog and Epilog scripts.
 -- Fix security issue caused by insecure file path handling triggered by the
    failure of a Prolog script. To exploit this a user needs to anticipate or
    cause the Prolog to fail for their job. CVE-2016-10030.

* Changes in Slurm 17.02.0pre3
==============================
 -- Add srun host & PID to job step data structures.
 -- Avoid creating duplicate pending step records for the same srun command.
 -- Rewrite srun's logic for pending steps for better efficiency (fewer RPCs).
 -- Added new SchedulerParameters options step_retry_count and step_retry_time
    to control scheduling behaviour of job steps waiting for resources.
 -- Optimize resource allocation logic for --spread-job job option.
 -- Modify cpu_bind and mem_bind map and mask options to accept a repetition
    count to better support large task count. For example:
    "mask_mem:0x0f*2,0xf0*2" is equivalent to "mask_mem:0x0f,0x0f,0xf0,0xf0".
 -- Add support for --mem_bind=prefer option to prefer, but not restrict memory
    use to the identified NUMA node.
 -- Add mechanism to constrain kernel memory allocation using cgroups. New
    cgroup.conf parameters added: ConstrainKmemSpace, MaxKmemPercent, and
    MinKmemSpace.
 -- Correct invokation of man2html, which previously could cause FreeBSD builds
    to hang.
 -- MYSQL - Unconditionally remove 'ignore' clause from 'alter ignore'.
 -- Modify service files to not start Slurm daemons until after Munge has been
    started.
    NOTE: If you are not using Munge, but are using the "service" scripts to
    start Slurm daemons, then you will need to remove this check from the
    etc/slurm*service scripts.
 -- Do not process SALLOC_HINT, SBATCH_HINT or SLURM_HINT environment variables
    if any of the following salloc, sbatch or srun command line options are
    specified: -B, --cpu_bind, --hint, --ntasks-per-core, or --threads-per-core.
 -- burst_buffer/cray: Accept new jobs on backup slurmctld daemon without access
    to dw_wlm_cli command. No burst buffer actions will take place.
 -- Do not include SLURM_JOB_DERIVED_EC, SLURM_JOB_EXIT_CODE, or
    SLURM_JOB_EXIT_CODE in PrologSlurmctld environment (not available yet).
 -- Cray - set task plugin to fatal() if task/cgroup is not loaded after
    task/cray in the TaskPlugin settings.
 -- Remove separate slurm_blcr package. If Slurm is built with BLCR support,
    the files will now be part of the main Slurm packages.
 -- Replace sjstat, seff and sjobexit RPM packages with a single "contribs"
    package.
 -- Remove long since defunct slurmdb-direct scripts.
 -- Add SbcastParameters configuration option to control default file
    destination directory and compression algorithm.
 -- Add new SchedulerParameter (max_array_tasks) to limit the maximum number of
    tasks in a job array independently from the maximum task ID (MaxArraySize).
 -- Fix issue where number of nodes is not properly allocated when sbatch and
    salloc are requested with -n tasks < hosts from -w hostlist or from -N.
 -- Add infrastructure for submitting federated jobs.

* Changes in Slurm 17.02.0pre2
==============================
 -- Add new RPC (REQUEST_EVENT_LOG) so that slurmd and slurmstepd can log events
    through the slurmctld daemon.
 -- Remove sbatch --bb option. That option was never supported.
 -- Automatically clean up task/cgroup cpuset and devices cgroups after steps
    are completed.
 -- Add federation read/write locks.
 -- Limit job purge run time to 1 second at a time.
 -- The database index for jobs is now 64 bits.  If you happen to be close to
    4 billion jobs in your database you will want to update your slurmctld at
    the same time as your slurmdbd to prevent roll over of this variable as
    it is 32 bit previous versions of Slurm.
 -- Optionally lock slurmstepd in memory for performance reasons and to avoid
    possible SIGBUS if the daemon is paged out at the time of a Slurm upgrade
    (changing plugins). Controlled via new LaunchParameters options of
    slurmstepd_memlock and slurmstepd_memlock_all.
 -- Add event trigger on burst buffer errors (see strigger man page,
    --burst_buffer option).
 -- Add job AdminComment field which can only be set by a Slurm administrator.
 -- Add salloc, sbatch and srun option of --delay-boot=<time>, which will
    temporarily delay booting nodes into the desired state for a job in the
    hope of using nodes already in the proper state which will be available at
    a later time.
 -- Add job burst_buffer_state and delay_boot fields to scontrol and squeue
    output. Also add ability to modify delay_boot from scontrol.
 -- Fix for node's available TRES array getting filled in with configured GRES
    model types.
 -- Log if job --bb option contains any unrecognized content.
 -- Display configured and allocated TRES for nodes in scontrol show nodes.
 -- Change all memory values (in MB) to uint64_t to accommodate > 2TB per node.
 -- Add MailDomain configuration parameter to qualify email addresses.
 -- Refactor the persistent connections within the federation code to use
    the same logic that was found in the slurmdbd.  Now both functionalities
    share the same code.
 -- Remove BlueGene/L and BlueGene/P support.
 -- Add "flag" field to launch_tasks_request_msg. Remove the following fields
    (moved into flags): multi_prog, task_flags, user_managed_io, pty,
    buffered_stdio, and labelio.
 -- Add protocol version to slurmd startup communications for slurmstepd to
    permit changes in the protocol.

* Changes in Slurm 17.02.0pre1
==============================
 -- burst_buffer/cray - Add support for rounding up the size of a buffer reqeust
    if the DataWarp configuration "equalize_fragments" is used.
 -- Remove AIX support.
 -- Rename "in" to "input" in slurm_step_io_fds data structure defined in
    slurm.h. This is needed to avoid breaking Python with by using one of its
    keywords in a Slurm data structure.
 -- Remove eligible_time from jobcomp/elasticsearch.
 -- Enable the deletion of a QOS, even if no clusters have been added to the
    database.
 -- SlurmDBD - change all timestamps to bigint from int to solve Y2038 problem.
 -- Add salloc/sbatch/srun --spread-job option to distribute tasks over as many
    nodes as possible. This also treats the --ntasks-per-node option as a
    maximum value.
 -- Add ConstrainKmemSpace to cgroup.conf, defaulting to yes, to allow
    cgroup Kmem enforcement to be disabled while still using ConstrainRAMSpace.
 -- Add support for sbatch --bbf option to specify a burst buffer input file.
 -- Added burst buffer support for job arrays. Add new SchedulerParameters
    configuration parameter of bb_array_stage_cnt=# to indicate how many pending
    tasks of a job array should be made available for burst buffer resource
    allocation.
 -- Fix small memory leak when a job fails to load from state save.
 -- Fix invalid read when attempting to delete clusters from database with
    running jobs.
 -- Fix small memory leak when deleting clusters from database.
 -- Add SLURM_ARRAY_TASK_COUNT environment variable. Total number of tasks in a
    job array (e.g. "--array=2,4,8" will set SLURM_ARRAY_TASK_COUNT=3).
 -- Add new sacctmgr commands: "shutdown" (shutdown the server), "list stats"
    (get server statistics) "clear stats" (clear server statistics).
 -- Restructure job accounting query to use 'id_job in (1, 2, .. )' format
    instead of logically equivalent 'id_job = 1 || id_job = 2 || ..' .
 -- Added start_delay field to jobcomp/elasticsearch.
 -- In order to support federated jobs, the MaxJobID configuration parameter
    default value has been reduced from 2,147,418,112 to 67,043,328 and its
    maximum value is now 67,108,863. Upon upgrading, any pre-existing jobs that
    have a job ID above the new range will continue to run and new jobs will get
    job IDs in the new range.
 -- Added infrastructure for setting up federations in database and establishing
    connections between federation clusters.

* Changes in Slurm 16.05.12
===========================

* Changes in Slurm 16.05.11
===========================
 -- burst_buffer/cray - Add support for line continuation.
 -- If a job is cancelled by the user while it's allocated nodes are being
    reconfigured (i.e. the capmc_resume program is rebooting nodes for the job)
    and the node reconfiguration fails (i.e. the reboot fails), then don't
    requeue the job but leave it in a cancelled state.
 -- capmc_resume (Cray resume node script) - Do not disable changing a node's
    active features if SyscfgPath is configured in the knl.conf file.
 -- Fix memory error when updating a job's licenses.
 -- Fix double read lock of tres when updating gres or licenses on a job.
 -- Fix regression in 16.05.10 with respects to GrpTresMins on a QOS or
    Association.
 -- ALPS - Fix scheduling when ALPS doesn't agree with Slurm on what nodes
    are free.
 -- Fix seg fault if loading attempting to load non-existent burstbuffer plugin.
 -- Fix to backfill scheduling with respect to QOS and association limits. Jobs
    submitted to multiple partitions are most likley to be effected.
 -- Avoid erroneous errno set by the mariadb 10.2 api.
 -- Fix security issue in Prolog and Epilog by always prepending SPANK_ to
    all user-set environment variables. CVE-2017-15566.

* Changes in Slurm 16.05.10-2
=============================
 -- Replace clock_gettime with time(NULL) for very old systems without the call.

* Changes in Slurm 16.05.10
===========================
 -- Record job state as PREEMPTED instead of TIMEOUT when GraceTime is reached.
 -- task/cgroup - print warnings to stderr when --cpu_bind=verbose is enabled
    and the requested processor affinity cannot be set.
 -- power/cray - Disable power cap get and set operations on DOWN nodes.
 -- Jobs preempted with PreemptMode=REQUEUE were incorrectly recorded as
    REQUEUED in the accounting.
 -- PMIX - Use volatile specifier to avoid flag caching and lock the flag to
    make sure it is protected.
 -- PMIX/PMI2 - Make it possible to use %n or %h in a spool dir.
 -- burst_buffer/cray - Support default pool which is not the first pool
    reported by DataWarp and log in Slurm when pools that are added or removed
    from DataWarp.
 -- Insure job does not start running before PrologSlurmctld is complete and
    node is booted (all nodes for interactive job, at least first node for batch
    job without burst buffers).
 -- Fix minor memory leak in the slurmctld when removing a QOS.
 -- burst_buffer/cray - Do not execute "pre_run" operation until after all nodes
    are booted and ready for use.
 -- scontrol - return an error when attempting to use the +=/-+ syntax to
    update a field where this is not appropriate.
 -- Fix task/affinity to work correctly with --ntasks-per-socket.
 -- Honor --ntasks-per-node and --ntasks option when used with job constraints
    that contain node counts.
 -- Prevent deadlocked slurmstepd processes due to unsafe use of regcomp with
    older glibc versions.
 -- Fix squeue when SLURM_BITSTR_LEN=0 is set in the user environment.
 -- Fix comments in acct_policy.c to reflect actual variables instead of
    old ones.
 -- Fix correct variables when validating GrpTresMins on a QOS.
 -- Better debug output when a job is being held because of a GrpTRES[Run]Min
    limits.
 -- Fix correct state reason when job can't run 'safely' because of an
    association GrpWall limit.
 -- Squeue always loads new data if user_id option specified
 -- Fix for possible job ID parsing failure and abort.
 -- If node boot in progress when slurmctld daemon is restarted, then allow
    sufficient time for reboot to complete and not prematurely DOWN the node as
    "Not responding".
 -- For job resize, correct logic to build "resize" script with new values.
    Previously the scripts were based upon the original job size.
 -- Fix squeue to not limit the size of partition, burst_buffer, exec_host, or
    reason to 32 chars.
 -- Fix potential packing error when packing a NULL slurmdb_clus_res_rec_t.
 -- Fix potential packing errors when packing a NULL slurmdb_reservation_cond_t.
 -- Burst_buffer/cray - Prevent slurmctld daemon abort if "paths" operation
    fails. Now job will be held. Update job update time when held.
 -- Fix issues with QOS flags Partition[Min|Max]Nodes to work correctly.
 -- Increase number of ResumePrograms that can be managed without leaving
    zombie/orphan processes from 10 to 100.
 -- Refactor slurmctld agent logic to eliminate some pthreads.

* Changes in Slurm 16.05.9
==========================
 -- Fix parsing of SBCAST_COMPRESS environment variable in sbcast.
 -- Change some debug messages to errors in task/cgroup plugin.
 -- backfill scheduler: Stop trying to determine expected start time for a job
    after 2 seconds of wall time. This can happen if there are many running jobs
    and a pending job can not be started soon.
 -- Improve performance of cr_sort_part_rows() in cons_res plugin.
 -- CRAY - Fix dealock issue when updating accounting in the slurmctld and
    scheduling a Datawarp job.
 -- Correct the job state accounting information for jobs requeued due to burst
    buffer errors.
 -- burst_buffer/cray - Avoid "pre_run" operation if not using buffer (i.e.
    just creating or deleting a persistent burst buffer).
 -- Fix slurm.spec file support for BlueGene builds.
 -- Fix missing TRES read lock in acct_policy_job_runnable_pre_select() code.
 -- Fix debug2 message printing value using wrong array index in
    _qos_job_runnable_post_select().
 -- Prevent job timeout on node power up.
 -- MYSQL - Fix minor memory leak when querying steps and the sql fails.
 -- Make it so sacctmgr accepts column headers like MaxTRESPU and not MaxTRESP.
 -- Only look at SLURM_STEP_KILLED_MSG_NODE_ID on startup, to avoid race
    condition later when looking at a steps env.
 -- Make backfill scheduler behave like regular scheduler in respect to
    'assoc_limit_stop'.
 -- Allow a lower version client command to talk to a higher version contoller
    using the multi-cluster options (e.g. squeue -M<clsuter>).
 -- slurmctld/agent race condition fix: Prevent job launch while PrologSlurmctld
    daemon is running or node boot in progress.
 -- MYSQL - Fix a few other minor memory leaks when uncommon failures occur.
 -- burst_buffer/cray - Fix race condition that could cause multiple batch job
    launch requests resulting in drained nodes.
 -- Correct logic to purge old reservations.
 -- Fix DBD cache restore from previous versions.
 -- Fix to logic for getting expected start time of existing job ID with
    explicit begin time that is in the past.
 -- Clear job's reason of "BeginTime" in a more timely fashion and/or prevents
    them from being stuck in a PENDING state.
 -- Make sure acct policy limits imposed on a job are correct after requeue.

* Changes in Slurm 16.05.8
==========================
 -- Remove StoragePass from being printed out in the slurmdbd log at debug2
    level.
 -- Defer PATH search for task program until launch in slurmstepd.
 -- Modify regression test1.89 to avoid leaving vestigial job. Also reduce
    logging to reduce likelyhood of Expect buffer overflow.
 -- Do not PATH search for mult-prog launches if LaunchParamters=test_exec is
    enabled.
 -- Fix for possible infinite loop in select/cons_res plugin when trying to
    satisfy a job's ntasks_per_core or socket specification.
 -- If job is held for bad constraints make it so once updated the job doesn't
    go into JobAdminHeld.
 -- sched/backfill - Fix logic to reserve resources for jobs that require a
    node reboot (i.e. to change KNL mode) in order to start.
 -- When unpacking a node or front_end record from state and the protocol
    version is lower than the min version, set it to the min.
 -- Remove redundant lookup for part_ptr when updating a reservation's nodes.
 -- Fix memory and file descriptor leaks in slurmd daemon's sbcast logic.
 -- Do not allocate specialized cores to jobs using the --exclusive option.
 -- Cancel interactive job if Prolog failure with "PrologFlags=contain" or
    "PrologFlags=alloc" configured. Send new error prolog failure message to
    the salloc or srun command as needed.
 -- Prevent possible out-of-bounds read in slurmstepd on an invalid #! line.
 -- Fix check for PluginDir within slurmctld to work with multiple directories.
 -- Cancel interactive jobs automatically on communication error to launching
    srun/salloc process.
 -- Fix security issue caused by insecure file path handling triggered by the
    failure of a Prolog script. To exploit this a user needs to anticipate or
    cause the Prolog to fail for their job. CVE-2016-10030.

* Changes in Slurm 16.05.7
==========================
 -- Fix issue in the priority/multifactor plugin where on a slurmctld restart,
    where more time is accounted for than should be allowed.
 -- cray/busrt_buffer - If total_space in a pool decreases, reset used_space
    rather than trying to account for buffer allocations in progress.
 -- cray/busrt_buffer - Fix for double counting of used_space at slurmctld
    startup.
 -- Fix regression in 16.05.6 where if you request multiple cpus per task (-c2)
    and request --ntasks-per-core=1 and only 1 task on the node
    the slurmd would abort on an infinite loop fatal.
 -- cray/busrt_buffer - Internally track both allocated and unusable space.
    The reported UsedSpace in a pool is now the allocated space (previously was
    unusable space). Base available space on whichever value leaves least free
    space.
 -- cray/burst_buffer - Preserve job ID and don't translate to job array ID.
 -- cray/burst_buffer - Update "instance" parsing to match updated dw_wlm_cli
    output.
 -- sched/backfill - Insure we don't try to start a job that was already started
    and requeued by the main scheduling logic.
 -- job_submit/lua - add access to the job features field in job_record.
 -- select/linear plugin modified to better support heterogeneous clusters when
    topology/none is also configured.
 -- Permit cancellation of jobs in configuring state.
 -- acct_gather_energy/rapl - prevent segfault in slurmd from race to gather
    data at slurmd startup.
 -- Integrate node_feature/knl_generic with "hbm" GRES information.
 -- Fix output routines to prevent rounding the TRES values for memory or BB.
 -- switch/cray plugin - fix use after free error.
 -- docs - elaborate on how way to clear TRES limits in sacctmgr.
 -- knl_cray plugin - Avoid abort from backup slurmctld at start time.
 -- cgroup plugins - fix two minor memory leaks.
 -- If a node is booting for some job, don't allocate additional jobs to the
    node until the boot completes.
 -- testsuite - fix job id output in test17.39.
 -- Modify backfill algorithm to improve performance with large numbers of
    running jobs. Group running jobs that end in a "similar" time frame using a
    time window that grows exponentially rather than linearly. After one second
    of wall time, simulate the termination of all remaining running jobs in
    order to respond in a reasonable time frame.
 -- Fix slurm_job_cpus_allocated_str_on_node_id() API call.
 -- sched/backfill plugin: Make malloc match data type (defined as uint32_t and
    allocated as int).
 -- srun - prevent segfault when terminating job step before step has launched.
 -- sacctmgr - prevent segfault when trying to reset usage for an invalid
    account name.
 -- Make the openssl crypto plugin compile with openssl >= 1.1.
 -- Fix SuspendExcNodes and SuspendExcParts on slurmctld reconfiguration.
 -- sbcast - prevent segfault in slurmd due to race condition between file
    transfers from separate jobs using zlib compression
 -- cray/burst_buffer - Increase time to synchronize operations between threads
    from 5 to 60 seconds ("setup" operation time observed over 17 seconds).
 -- node_features/knl_cray - Fix possible race condition when changing node
    state that could result in old KNL mode as an active features.
 -- Make sure if a job can't run because of resources we also check accounting
    limits after the node selection to make sure it doesn't violate those limits
    and if it does change the reason for waiting so we don't reserve resources
    on jobs violating accounting limits.
 -- NRT - Make it so a system running against IBM's PE will work with PE
    version 1.3.
 -- NRT - Make it so protocols pgas and test are allowed to be used.
 -- NRT - Make it so you can have more than 1 protocol listed in MP_MSG_API.
 -- cray/burst_buffer - If slurmctld daemon restarts with pending job and burst
    buffer having unknown file stage-in status, teardown the buffer, defer the
    job, and start stage-in over again.
 -- On state restore in the slurmctld don't overwrite the mem_spec_limit given
    from the slurm.conf when using FastSchedule=0.
 -- Recognize a KNL's proper NUMA count (rather than setting it to the value
    in slurm.conf) when using FastSchedule=0.
 -- Fix parsing in regression test1.92 for some prompts.
 -- sbcast - use slurmd's gid cache rather than a separate lookup.
 -- slurmd - return error if setgroups() call fails in _drop_privileges().
 -- Remove error messages about gres counts changing when a job is resized on
    a slurmctld restart or reconfig, as they aren't really error messages.
 -- Fix possible memory corruption if a job is using GRES and changing size.
 -- jobcomp/elasticsearch - fix printf format for a value on 32-bit builds.
 -- task/cgroup - Change error message if CPU binding can not take place to
    better identify the root cause of the problem.
 -- Fix issue where task/cgroup would not always honor --cpu_bind=threads.
 -- Fix race condition in with getgrouplist() in slurmd that can lead to
    user accounts being granted access to incorrect group memberships during
    job launch.

* Changes in Slurm 16.05.6
==========================
 -- Docs - the correct default value for GroupUpdateForce is 0.
 -- mpi/pmix - improve point to point communication performance.
 -- SlurmDB - include pending jobs in search during 'sacctmgr show runawayjobs'.
 -- Add client side out-of-range checks to --nice flag.
 -- Fix support for sbatch "-W" option, previously eeded to use "--wait".
 -- node_features/knl_cray plugin and capmc_suspend/resume programs modified to
    sleep and retry capmc operations if the Cray State Manager is down. Added
    CapmcRetries configuration parameter to knl_cray.conf.
 -- node_features/knl_cray plugin: Remove any KNL MCDRAM or NUMA features from
    node's configuration if capmc does NOT report the node as being KNL.
 -- node_features/knl_cray plugin: drain any node not reported by
    "capmc node_status" on startup or reconfig.
 -- node_features/knl_cray plugin: Substantially streamline and speed up logic
    to load current node state on reconfigure failure or unexpected node boot.
 -- node_features/knl_cray plugin: Add separate thread to interact with capmc
    in response to unexpected node reboots.
 -- node_features plugin - Add "mode" argument to node_features_p_node_xlate()
    function to fix some bugs updating a node's features using the node update
    RPC.
 -- node_features/knl_cray plugin: If the reconfiguration of nodes for an
    interactive job fails, kill the job (it can't be requeued like a batch job).
 -- Testsuite - Added srun/salloc/sbatch tests with --use-min-nodes option.
 -- Fix typo when an error occurs when discovering pmix version on
    configure.
 -- Fix configuring pmix support when you have your lib dir symlinked to lib64.
 -- Fix waiting reason if a job is waiting for a specific limit instead of
    always just AccountingPolicy.
 -- Correct SchedulerParameters=bf_busy_nodes logic with respect to the job's
    minimum node count. Previous logic would not decremement counter in some
    locations and reject valid job request for not reaching minimum node count.