Newer
Older
-- Add ARRAY_TASKS mail option to send emails to each task in a job array.
-- Change default compression library for sbcast to lz4.
-- select/cray - Initiate step node health check at start of step termination
rather than after application completely ends so that NHC can capture
information about hung (non-killable) processes.
-- Add --units=[KMGTP] option to sacct to display values in specific unit type.
-- Modify sacct and sacctmgr to display TRES values in converted units.
-- Modify sacctmgr to accept TRES values with [KMGTP] suffixes.
-- Replace hash function with more modern SipHash functions.
-- Add "--with-cray_dir" build/configure option.
-- BB- Only send stage_out email when stage_out is set in script.
-- Add r/w locking to file_bcast receive functions in slurmd.
-- Add TopologyParam option of "TopoOptional" to optimize network topology
only for jobs requesting it.
-- Fix build on FreeBSD.
-- Configuration parameter "CpuFreqDef" used to set default governor for job
step not specifying --cpu-freq (previously the parameter was unused).
-- Fix sshare -o<format> to correctly display new lengths.
-- Update documentation to rename Shared option to OverSubscribe.
-- Update documentation to rename partition Priority option to PriorityTier.
-- Prevent changing of QOS on running jobs.
-- Update accounting when changing QOS on pending jobs.
-- Add support to ntasks_per_socket in task/affinity.
-- Generate init.d and systemd service scripts in etc/ through Make rather
than at configure time to ensure all variable substitutions happen.
-- Use TaskPluginParam for default task binding if no user specified CPU
binding. User --cpu_bind option takes precident over default. No longer
any error if user --cpu_bind option does not match TaskPluginParam.
-- Make sacct and sattach work with older slurmd versions.
-- Fix protocol handling between 15.08 and 16.05 for 'scontrol show config'.
-- Enable prefixes (e.g. info, debug, etc.) in slurmstepd debugging.
* Changes in Slurm 16.05.0pre2
==============================
-- Split partition's "Priority" field into "PriorityTier" (used to order
partitions for scheduling and preemption) plus "PriorityJobFactor" (used by
priority/multifactor plugin in calculating job priority, which is used to
order jobs within a partition for scheduling).
-- Revert call to getaddrinfo, restoring gethostbyaddr (introduced in Slurm
16.05.0pre1) which was failing on some systems.
-- knl_cray.conf - Added AllowMCDRAM, AllowNUMA and ALlowUserBoot
configuration options.
-- Add node_features_p_user_update() function to node_features plugin.
-- Don't print Weight=1 lines in 'scontrol write config' (its the default).
-- Remove PARAMS macro from slurm.h.
-- Remove BEGIN_C_DECLS and END_C_DECLS macros.
-- Check that PowerSave mode configured for node_features/knl_cray plugin.
It is required to reconfigure and reboot nodes.
-- Update documentation to reflect new cgroup default location change from
/cgroup to /sys/fs/cgroup.
-- If NodeHealthCheckProgram configured HealthCheckInterval is non-zero, then
modify slurmd to run it before registering with slurmctld.
-- Fix for tasks being packed onto cores when the requested --cpus-per-task is
greater than the number of threads on a core and --ntasks-per-core is 1.
-- Make it so jobs/steps track ':' named gres/tres, before hand gres/gpu:tesla
would only track gres/gpu, now it will track both gres/gpu and
gres/gpu:tesla as separate gres if configured like
AccountingStorageTRES=gres/gpu,gres/gpu:tesla
-- Added new job dependency type of "aftercorr" which will start a task of a
job array after the corresponding task of another job array completes.
-- Increase default MaxTasksPerNode configuration parameter from 128 to 512.
-- Enable sbcast data compression logic (compress option previously ignored).
-- Add --compress option to srun command for use with --bcast option.
-- Add TCPTimeout option to slurm[dbd].conf. Decouples MessageTimeout from TCP
connections.
-- Don't call primary controller for every RPC when backup is in control.
-- Add --gres-flags=enforce-binding option to salloc, sbatch and srun commands.
If set, the only CPUs available to the job will be those bound to the
selected GRES (i.e. the CPUs identifed in the gres.conf file will be
strictly enforced rather than advisory).
-- Change how a node's allocated CPU count is calculated to avoid double
counting CPUs allocated to multiple jobs at the same time.
-- Added SchedulingParameters option of "bf_min_prio_reserve". Jobs below
the specified threshold will not have resources reserved for them.
-- Added "sacctmgr show lostjobs" to report any orphaned jobs in the database.
-- When a stepd is about to shutdown and send it's response to srun
make the wait to return data only hit after 500 nodes and configurable
based on the TcpTimeout value.
-- Add functionality to reset the lft and rgt values of the association table
with the slurmdbd.
-- Add SchedulerParameter no_env_cache, if set no env cache will be use when
launching a job, instead the job will fail and drain the node if the env
isn't loaded normally.
* Changes in Slurm 16.05.0pre1
-- Add sbatch "--wait" option that waits for job completion before exiting.
Exit code will match that of spawned job.
-- Modify advanced reservation save/restore logic for core reservations to
support configuration changes (changes in configured nodes or cores counts).
Brian Christiansen
committed
-- Allow ControlMachine, BackupController, DbdHost and DbdBackupHost to be
either short or long hostname.
-- Job output and error files can now contain "%" character by specifying
a file name with two consecutive "%" characters. For example,
"sbatch -o "slurm.%%.%j" for job ID 123 will generate an output file named
"slurm.%.123".
-- Pass user name in Prolog RPC from controller to slurmd when using
PrologFlags=Alloc. Allows SLURM_JOB_USER env variable to be set when using
Native Slurm on a Cray.
-- Add "NumTasks" to job information visible to Slurm commands.
-- Add mail wrapper script "smail" that will include job statistics in email
notification messages.
-- Remove vestigial "SICP" job option (inter-cluster job option). Completely
different logic will be forthcoming.
Brian Christiansen
committed
-- Fix case where the primary and backup dbds would both be performing rollup.
-- Add an ack reply from slurmd to slurmstepd when job setup is done and the
job is ready to be executed.
-- Removed support for authd. authd has not been developed and supported since
-- Introduce a new parameter requeue_setup_env_fail in SchedulerParameters.
A job that fails to setup the environment will be requeued and the node
drained.
-- Add ValidateTimeout and OtherTimeout to "scontrol show burst" output.
-- Increase default sbcast buffer size from 512KB to 8MB.
-- Enable the hdf5 profiling of the batch step.
-- Eliminate redundant environment and script files for job arrays.
-- Stop searching sbatch scripts for #PBS directives after 100 lines of
non-comments. Stop parsing #PBS or #SLURM directives after 1024 characters
into a line. Required for decent perforamnce with huge scripts.
-- Add debug flag for timing Cray portions of the code.
-- Add Multi-Category Security (MCS) infrastructure to permit nodes to be bound
to specific users or groups.
-- Install the pmi2 unix sockets in slurmd spool directory instead of /tmp.
-- Implement the getaddrinfo and getnameinfo instead of gethostbyaddr and
gethostbyname.
-- Finished PMIx implementation.
-- Implemented the --without=package option for configure.
-- Fix sshare to show each individual cluster with -M,--clusters option.
-- Added --deadline option to salloc, sbatch and srun. Jobs which can not be
completed by the user specified deadline will be terminated with a state of
"Deadline" or "DL".
-- Implemented and documented PMIX protocol which is used to bootstrap an
MPI job. PMIX is an alternative to PMI and PMI2.
-- Change default CgroupMountpoint (in cgroup.conf) from "/cgroup" to
"/sys/fs/cgroup" to match current standard.
-- Add #BSUB options to sbatch to read in from the batch script.
-- HDF: Change group name of node from nodename to nodeid.
-- The partition-specific SelectTypeParameters parameter can now be used to
change the memory allocation tracking specification in the global
SelectTypeParameters configuration parameter. Supported partition-specific
values are CR_Core, CR_Core_Memory, CR_Socket and CR_Socket_Memory. If the
global SelectTypeParameters value includes memory allocation management and
the partition-specific value does not, then memory allocation management for
that partition will NOT be supported (i.e. memory can be over-allocated).
Likewise the global SelectTypeParameters might not include memory management
while the partition-specific value does.
-- Burst buffer/cray - Add support for multiple buffer pools including support
for different resource granularity by pool.
-- Burst buffer advanced reservation units treated as bytes (per documentation)
rather than GB.
-- Add an "scontrol top <jobid>" command to re-order the priorities of a user's
pending jobs. May be disabled with the "disable_user_top" option in the
SchedulerParameters configuration parameter.
-- Modify sview to display negative job nice values.
-- Increase job's nice value field from 16 to 32 bits.
-- Remove deprecated job_submit/cnode plugin.
-- Enhance slurm.conf option EnforcePartLimit to include options like "ANY" and
"ALL". "Any" is equivalent to "Yes" and "All" will check all partitions
a job is submitted to and if any partition limit is violated the job will
be rejected even if it could possibly run on another partition.
-- Add "features_act" field (currently active features) to the node
information. Output of scontrol, sinfo, and sview changed accordingly.
The field previously displayed as "Features" is now "AvailableFeatures"
while the new field is displayed as "ActiveFeatures".
-- Remove Sun Constellation, IBM Federation Switches (replaced by NRT switch
plugin) and long-defunct Quadrics Elan support.
-- Add -M<clusters> option to sreport.
Janne Blomqvist
committed
-- Rework group caching to work better in environments with
enumeration disabled. Removed CacheGroups config directive, group
membership lists are now always cached, controlled by
GroupUpdateTime parameter. GroupUpdateForce parameter default
value changed to 1.
-- Add reservation flag of "purge_comp" which will purge an advanced
reservation once it has no more active (pending, suspended or running) jobs.
-- Add new configuration parameter "KNLPlugins" and plugin infrastructure.
-- Add optional job "features" to node reboot RPC.
-- Add slurmd "-b" option to report node rebooted at daemon start time. Used
for testing purposes.
-- contribs/cray: Add framework for powering nodes up and down.
-- For job constraint, convert comma separator to "&".
-- Add Max*PerAccount options for QOS.
-- Protect slurm_mutex_* calls with abort() on failure.
* Changes in Slurm 15.08.14
===========================
-- For job resize, correct logic to build "resize" script with new values.
Previously the scripts were based upon the original job size.
* Changes in Slurm 15.08.13
===========================
-- Fix issue where slurmd could core when running the ipmi energy plugin.
-- Print correct return code on failure to update node features through sview.
-- Add logic so that slurmstepd can be launched under valgrind.
-- Increase buffer size to read /proc/*/stat files.
-- MYSQL - Handle ER_HOST_IS_BLOCKED better by failing when it occurs instead
of continuously printing the message over and over as the problem will
most likely not resolve itself.
-- Add --disable-bluegene to configure. This will make it so Slurm
can work on a BGAS node.
-- Prevent job stuck in configuring state if slurmctld daemon restarted while
PrologSlurmctld is running.
-- Handle association correctly if using FAIR_TREE as well as shares=Parent
-- Fix race condition when setting priority of a job and the association
doesn't have a parent.
-- MYSQL - Fix issue with adding a reservation if the name has single quotes in
it.
-- Correctly print ranges when using step values in job arrays.
-- Fix for invalid array pointer when creating advanced reservation when job
allocations span heterogeneous nodes (differing core or socket counts).
-- Fix for sstat to print correct info when requesting jobid.batch as part of
a comma-separated list.
-- Cray - Fix issue restoring jobs when blade count increases due to hardware
reconfiguration.
-- Ignore warnings about depricated functions. This is primarily there for
new glibc 2.24+ that depricates readdir_r.
-- Fix security issue caused by insecure file path handling triggered by the
failure of a Prolog script. To exploit this a user needs to anticipate or
cause the Prolog to fail for their job. CVE-2016-10030.
===========================
-- Do not attempt to power down a node which has never responded if the
slurmctld daemon restarts without state.
-- Fix for possible slurmstepd segfault on invalid user ID.
-- MySQL - Fix for possible race condition when archiving multiple clusters
at the same time.
-- Fix compile for when you don't have hwloc.
-- Fix issue where daemons would only listen on specific address given in
slurm.conf instead of all. If looking for specific addresses use
TopologyParam options No*InAddrAny.
-- Cray - Better robustness when dealing with the aeld interface.
-- job_submit.lua - add array_inx value for job arrays.
-- Perlapi - Remove unneeded/undefined mutex.
-- Fix issue when TopologyParam=NoInAddrAny is set the responses wouldn't
make it to the slurmctld when using message aggregation.
-- MySQL - Fix potential memory leak when rolling up data.
-- Fix issue with clustername file when running on NFS with root_squash.
-- Fix race condition with respects to cleaning up the profiling threads
when in use.
-- Fix issues when building on NetBSD.
Tim Wickberg
committed
-- Fix jobcomp/elasticsearch build when libcurl is installed in a
non-standard location.
Alejandro Sanchez
committed
-- Fix MemSpecLimit to explicitly require TaskPlugin=task/cgroup and
ConstrainRAMSpace set in cgroup.conf.
-- MYSQL - Fix order of operations issue where if the database is locked up
and the slurmctld doesn't wait long enough for the response it would give
up leaving the connection open and create a situation where the next message
sent could receive the response of the first one.
-- Fix CFULL_BLOCK distribution type.
Tim Wickberg
committed
-- Prevent sbatch from trying to enable debug messages when using job arrays.
-- Prevent sbcast from enabling "--preserve" when specifying a jobid.
-- Prevent wrong error message from spank plugin stack on GLOB_NOSPACE error.
-- Fix proctrack/lua plugin to prevent possible deadlock.
Tim Wickberg
committed
-- Prevent infinite loop in slurmstepd if execve fails.
-- Prevent multiple responses to REQUEST_UPDATE_JOB_STEP message.
-- Prevent possible deadlock in acct_gather_filesystem/lustre on error.
-- Make it so --mail-type=NONE didn't throw an invalid error.
-- If no default account is given for a user when creating (only a list of
accounts) no default account is printed, previously NULL was printed.
-- Fix for tracking a node's allocated CPUs with gang scheduling.
-- Fix Hidden error during _rpc_forward_data call.
-- Fix bug resulting from wrong order-of-operations in _connect_srun_cr(),
and two others that cause incorrect debug messages.
-- Fix backwards compatibility with sreport going to <= 14.11 coming from
>= 15.08 for some reports.
* Changes in Slurm 15.08.11
===========================
-- Fix for job "--contiguous" option that could cause job allocation/launch
failure or slurmctld crash.
-- Fix to setup logs for single-character program names correctly.
-- Backfill scheduling performance enhancement with large number of running
jobs.
-- Reset job's prolog_running counter on slurmctld restart or reconfigure.
-- burst_buffer/cray - Update job's prolog_running counter if pre_run fails.
-- MYSQL - Make the error message more specific when removing a reservation
and it doesn't meet basic requirements.
-- burst_buffer/cray - Fix for script creating or deleting persistent buffer
would fail "paths" operation and hold the job.
-- power/cray - Prevent possible divide by zero.
-- power/cray - Fix bug introduced in 15.08.10 preventin operation in many
cases.
-- Prevent deadlock for flow of data to the slurmdbd when sending reservation
that wasn't set up correctly.
-- burst_buffer/cray - Don't call Datawarp "paths" function if script includes
only create or destroy of persistent burst buffer. Some versions of Datawarp
software return an error for such scripts, causing the job to be held.
-- Fix potential issue when adding and removing TRES which could result
in the slurmdbd segfaulting.
-- Add cast to memory limit calculation to prevent integer overflow for
very large memory values.
-- Bluegene - Fix issue with reservations resizing under the covers on a
restart of the slurmctld.
-- Avoid error message of "Requested cpu_bind option requires entire node to
be allocated; disabling affinity" being generated in some cases where
task/affinity and task/cgroup plugins used together.
-- Fix version issue when packing GRES information between 2 different versions
of Slurm.
-- Fix for srun hanging with OpenMPI and PMIx
-- Better initialization of node_ptr when dealing with protocol_version.
-- Fix incorrect type when initializing header of a message.
-- MYSQL - Fix incorrect usage of limit and union.
-- MYSQL - Remove 'ignore' from alter ignore when updating a table.
-- Documentation - update prolog_epilog page to reflect current behavior
if the Prolog fails.
-- Documentation - clarify behavior of 'srun --export=NONE' in man page.
-- Fix potential gres underflow on restart of slurmctld.
-- Fix sacctmgr to remove a user who has no associations.
* Changes in Slurm 15.08.10
===========================
-- Fix issue where if a slurmdbd rollup lasted longer than 1 hour the
rollup would effectively never run again.
Matthieu Hautreux
committed
-- Make error message in the pmi2 code to debug as the issue can be expected
and retries are done making the error message a little misleading.
-- Power/cray: Don't specify NID list to Cray APIs. If any of those nodes are
not in a ready state, the API returned an error for ALL nodes rather than
valid data for nodes in ready state.
-- Fix potential divide by zero when tree_width=1.
-- checkpoint/blcr plugin: Fix memory leak.
-- If using PrologFlags=contain: Don't launch the extern step if a job is
cancelled while launching.
-- Remove duplicates from AccountingStorageTRES
-- Fix backfill scheduler race condition that could cause invalid pointer in
select/cons_res plugin. Bug introduced in 15.08.9.
-- Avoid double calculation on partition QOS if the job is using the same QOS.
-- Do not change a job's time limit when updating unrelated field in a job.
-- Fix situation on a heterogeneous memory cluster where the order of
constraints mattered in a job.
* Changes in Slurm 15.08.9
==========================
-- BurstBuffer/cray - Defer job cancellation or time limit while "pre-run"
operation in progress to avoid inconsistent state due to multiple calls
to job termination functions.
-- Fix issue with resizing jobs and limits not be kept track of correctly.
-- BGQ - Remove redeclaration of job_read_lock.
-- BGQ - Tighter locks around structures when nodes/cables change state.
-- Make it possible to change CPUsPerTask with scontrol.
-- Make it so scontrol update part qos= will take away a partition QOS from
a partition.
-- Fix issue where SocketsPerBoard didn't translate to Sockets when CPUS=
was also given.
-- Add note to slurm.conf man page about setting "--cpu_bind=no" as part
of SallocDefaultCommand if a TaskPlugin is in use.
-- Set correct reason when a QOS' MaxTresMins is violated.
-- Insure that a job is completely launched before trying to suspend it.
-- Remove historical presentations and design notes. Only distribute
maintained doc/html and doc/man directories.
-- Remove duplicate xmalloc() in task/cgroup plugin.
-- Backfill scheduler to validate correct job partition for job submitted to
multiple partitions.
-- Force close on exec on first 256 file descriptors when launching a
slurmstepd to close potential open ones.
-- Step GRES value changed from type "int" to "int64_t" to support larger
values.
-- Fix getting reservations to database when database is down.
-- Fix issue with sbcast not doing a correct fanout.
-- Fix issue where steps weren't always getting the gres/tres involved.
-- Fixed double read lock on getting job's gres/tres.
-- Fix display for RoutePlugin parameter to display the correct value.
-- Fix route/topology plugin to prevent segfault in sbcast when in use.
-- Fix Cray slurmconfgen_smw.py script to use nid as nid, not nic.
-- Fix Cray NHC spawning on job requeue. Previous logic would leave nodes
allocated to a requeued job as non-usable on job termination.
-- burst_buffer/cray plugin: Prevent a requeued job from being restarted while
file stage-out is still in progress. Previous logic could restart the job
and not perform a new stage-in.
-- Fix job array formatting to allow return [0-100:2] display for arrays with
step functions rather than [0,2,4,6,8,...] .
-- FreeBSD - replace Linux-specific set_oom_adj to avoid errors in slurmd log.
-- Add option for TopologyParam=NoInAddrAnyCtld to make the slurmctld listen
on only one port like TopologyParam=NoInAddrAny does for everything else.
-- Fix burst buffer plugin to prevent corruption of the CPU TRES data when bb
is not set as an AccountingStorageTRES type.
-- Surpress error messages in acct_gather_energy/ipmi plugin after repeated
failures.
-- Change burst buffer use completion email message from
"SLURM Job_id=1360353 Name=tmp Staged Out, StageOut time 00:01:47" to
"SLURM Job_id=1360353 Name=tmp StageOut/Teardown time 00:01:47"
-- Generate burst buffer use completion email immediately afer teardown
completes rather than at job purge time (likely minutes later).
-- Fix issue when adding a new TRES to AccountingStorageTRES for the first
time.
-- Update gang scheduling tables when job manually suspended or resumed. Prior
logic could mess up job suspend/resume sequencing.
-- Update gang scheduling data structures when job changes in size.
-- Associations - prevent hash table corruption if uid initially unset for
a user, which can cause slurmctld to crash if that user is deleted.
-- Avoid possibly aborting srun on SIGSTOP while creating the job step due to
threading bug.
-- Fix deadlock issue with burst_buffer/cray when a newly created burst
buffer is found.
-- burst_buffer/cray: Set environment variables just before starting job rather
than at job submission time to reflect persistent buffers created or
modified while the job is pending.
-- Fix check of per-user qos limits on the initial run by a user.
-- Fix gang scheduling resource selection bug which could prevent multiple jobs
from being allocated the same resources. Bug was introduced in 15.08.6.
-- Don't print the Rgt value of an association from the cache as it isn't
kept up to date.
-- burst_buffer/cray - If the pre-run operation fails then don't issue
duplicate job cancel/requeue unless the job is still in run state. Prevents
jobs hung in COMPLETING state.
-- task/cgroup - Fix bug in task binding to CPUs.
* Changes in Slurm 15.08.8
==========================
-- Backfill scheduling properly synchronized with Cray Node Health Check.
Prior logic could result in highest priority job getting improperly
postponed.
-- Make it so daemons also support TopologyParam=NoInAddrAny.
-- If scancel is operating on large number of jobs and RPC responses from
slurmctld daemon are slow then introduce a delay in sending the cancel job
requests from scancel in order to reduce load on slurmctld.
-- Remove redundant logic when updating a job's task count.
-- MySQL - Fix querying jobs with reservations when the id's have rolled.
-- Perl - Fix use of uninitialized variable in slurm_job_step_get_pids.
-- Launch batch job requsting --reboot after the boot completes.
-- Move debug messages like "not the right user" from association manager
to debug3 when trying to find the correct association.
-- Fix incorrect logic when querying assoc_mgr information.
-- Move debug messages to debug3 notifying a gres_bit_alloc was NULL for
gres types without a file.
-- Sanity Check Patch to setup variables for RAPL if in a race for it.
-- burst_buffer/cray - Increase size of intermediate variable used to store
buffer byte size read from DW instance from 32 to 64-bits to avoid overflow
and reporting invalid buffer sizes.
-- Allow an existing reservation with running jobs to be modified without
Flags=IGNORE_JOBS.
-- srun - don't attempt to execve() a directory with a name matching the
requested command
-- Do not automatically relocate an advanced reservation for individual cores
that spans multiple nodes when nodes in that reservation go down (e.g.
a 1 core reservation on node "tux1" will be moved if node "tux1" goes
down, but a reservation containing 2 cores on node "tux1" and 3 cores on
"tux2" will not be moved node "tux1" goes down). Advanced reservations for
whole nodes will be moved by default for down nodes.
-- Avoid possible double free of memory (and likely abort) for slurmctld in
background mode.
-- contribs/cray/csm/slurmconfgen_smw.py - avoid including repurposed compute
nodes in configs.
-- Support AuthInfo in slurmdbd.conf that is different from the value in
slurm.conf.
-- Fix hdf5 build on ppc64 by using correct fprintf formatting for types.
-- Fix cosmetic printing of NO_VALs in scontrol show assoc_mgr.
-- Fix perl api for newer perl versions.
Brian Christiansen
committed
-- Fix for jobs requesting cpus-per-task (eg. -c3) that exceed the number of
cpus on a core.
-- Remove unneeded perl files from the .spec file.
-- Flesh out filters for scontrol show assoc_mgr.
-- Add function to remove assoc_mgr_info_request_t members without freeing
structure.
-- Fix build on some non-glibc systems by updating includes.
-- Add new PowerParameters options of get_timeout and set_timeout. The default
set_timeout was increased from 5 seconds to 30 seconds. Also re-read current
power caps periodically or after any failed "set" operation.
-- Fix slurmdbd segfault when listing users with blank user condition.
-- Save the ClusterName to a file in SaveStateLocation, and use that to
verify the state directory belongs to the given cluster at startup to avoid
corruption from multiple clusters attempting to share a state directory.
-- MYSQL - Fix issue when rerolling monthly data to work off correct time
period. This would only hit you if you rerolled a 15.08 prior to this
commit.
-- If FastSchedule=0 is used make sure TRES are set up correctly in accounting.
-- Fix sreport's truncation of columns with large TRES and not using
a parsing option.
-- Make sure count of boards are restored when slurmctld has option -R.
-- When determine if a job can fit into a TRES time limit after resources
have been selected set the time limit appropriately if the job didn't
request one.
-- Fix inadequate locks when updating a partition's TRES.
-- Add new assoc_limit_continue flag to SchedulerParameters.
Alejandro Sanchez
committed
-- Avoid race in acct_gather_energy_cray if energy requested before available.
-- MYSQL - Avoid having multiple default accounts when a user is added to
a new account and making it a default all at once.
* Changes in Slurm 15.08.7
==========================
-- sched/backfill: If a job can not be started within the configured
backfill_window, set it's start time to 0 (unknown) rather than the end
of the backfill_window.
-- Remove the 1024-character limit on lines in batch scripts.
-- burst_buffer/cray: Round up swap size by configured granularity.
-- select/cray: Log repeated aeld reconnects.
-- task/affinity: Disable core-level task binding if more CPUs required than
available cores.
-- Preemption/gang scheduling: If a job is suspended at slurmctld restart or
reconfiguration time, then leave it suspended rather than resume+suspend.
-- Don't use lower weight nodes for job allocation when topology/tree used.
-- BGQ - If a cable goes into error state remove the under lying block on
a dynamic system and mark the block in error on a static/overlap system.
-- BGQ - Fix regression in 9cc4ae8add7f where blocks would be deleted on
static/overlap systems when some hardware issue happens when restarting
the slurmctld.
Alejandro Sanchez
committed
-- Log if CLOUD node configured without a resume/suspend program or suspend
time.
-- MYSQL - Better locking around g_qos_count which was previously unprotected.
-- Correct size of buffer used for jobid2str to avoid truncation.
Brian Christiansen
committed
-- Fix allocation/distribution of tasks across multiple nodes when
--hint=nomultithread is requested.
-- If a reservation's nodes value is "all" then track the current nodes in the
system, even if those nodes change.
-- Fix formatting if using "tree" option with sreport.
-- Make it so sreport prints out a line for non-existent TRES instead of
error message.
-- Set job's reason to "Priority" when higher priority job in that partition
(or reservation) can not start rather than leaving the reason set to
"Resources".
-- Fix memory corruption when a new non-generic TRES is added to the
DBD for the first time. The corruption is only noticed at shutdown.
-- burst_buffer/cray - Improve tracking of allocated resources to handle race
condition when reading state while buffer allocation is in progress.
-- If a job is submitted only with -c option and numcpus is updated before
the job starts update the cpus_per_task appropriately.
-- Update salloc/sbatch/srun documentation to mention time granularity.
-- Fixed memory leak when freeing assoc_mgr_info_msg_t.
-- Prevent possible use of empty reservation core bitmap, causing abort.
-- Remove unneeded pack32's from qos_rec when qos_rec is NULL.
-- Make sacctmgr print MaxJobsPerUser when adding/altering a QOS.
-- Correct dependency formatting to print array task ids if set.
-- Update sacctmgr help with current QOS options.
-- Update slurmstepd to initialize authentication before task launch.
-- burst_cray/cray: Eliminate need for dedicated nodes.
-- If no MsgAggregationParams is set don't set the internal string to
anything. The slurmd will process things correctly after the fact.
-- Fix output from api when printing job step not found.
-- Don't allow user specified reservation names to disrupt the normal
reservation sequeuece numbering scheme.
-- Fix scontrol to be able to accept TRES as an option when creating
a reservation.
-- contrib/torque/qstat.pl - return exit code of zero even with no records
printed for 'qstat -u'.
-- When a reservation is created or updated, compress user provided node names
using hostlist functions (e.g. translate user input of "Nodes=tux1,tux2"
into "Nodes=tux[1-2]").
-- Change output routines for scontrol show partition/reservation to handle
unexpectedly large strings.
-- Add more partition fields to "scontrol write config" output file.
-- Backfill scheduling fix: If a job can't be started due to a "group" resource
limit, rather than reserve resources for it when the next job ends, don't
reserve any resources for it.
-- Avoid slurmstepd abort if malloc fails during accounting gather operation.
Brian Christiansen
committed
-- Fix nodes from being overallocated when allocation straddles multiple nodes.
-- Fix memory leak in slurmctld job array logic.
Brian Christiansen
committed
-- Prevent decrementing of TRESRunMins when AccountingStorageEnforce=limits is
not set.
-- Fix backfill scheduling bug which could postpone the scheduling of jobs due
to avoidance of nodes in COMPLETING state.
-- Properly account for memory, CPUs and GRES when slurmctld is reconfigured
while there is a suspended job. Previous logic would add the CPUs, but not
memory or GPUs. This would result in underflow/overflow errors in select
cons_res plugin.
-- Strip flags from a job state in qstat wrapper before evaluating.
-- Add missing job states from the qstat wrapper.
-- Cleanup output routines to reduce number of fixed-sized buffer function
calls and allow for unexpectedly large strings.
* Changes in Slurm 15.08.6
==========================
-- In slurmctld log file, log duplicate job ID found by slurmd. Previously was
being logged as prolog/epilog failure.
-- If a job is requeued while in the process of being launch, remove it's
job ID from slurmd's record of active jobs in order to avoid generating a
duplicate job ID error when launched for the second time (which would
drain the node).
Tim Wickberg
committed
-- Cleanup messages when handling job script and environment variables in
older directory structure formats.
-- Prevent triggering gang scheduling within a partition if configured with
PreemptType=partition_prio and PreemptMode=suspend,gang.
-- Decrease parallelism in job cancel request to prevent denial of service
when cancelling huge numbers of jobs.
-- If all ephemeral ports are in use, try using other port numbers.
-- Revert way lib lua is handled when doing a dlopen, fixing a regression in
15.08.5.
Brian Christiansen
committed
-- Set the debug level of the rmdir message in xcgroup_delete() to debug2.
-- Fix the qstat wrapper when user is removed from the system but still
has running jobs.
-- Log the request to terminate a job at info level if DebugFlags includes
the Steps keyword.
-- Fix potential memory corruption in _slurm_rpc_epilog_complete as well as
_slurm_rpc_complete_job_allocation.
-- Fix cosmetic display of AccountingStorageEnforce option "nosteps" when
in use.
-- If a job can never be started due to unsatisfied job dependencies, report
the full original job dependency specification rather than the dependencies
remaining to be satisfied (typically NULL).
-- Refactor logic to synchronize active batch jobs and their script/environment
files, reducing overhead dramatically for large numbers of active jobs.
-- Avoid hard-link/copy of script/environment files for job arrays. Use the
master job record file for all tasks of the job array.
NOTE: Job arrays submitted to Slurm version 15.08.6 or later will fail if
the slurmctld daemon is downgraded to an earlier version of Slurm.
-- Move slurmctld mail handler to separate thread for improved performance.
-- Fix containment of adopted processes from pam_slurm_adopt.
-- If a pending job array has multiple reasons for being in a pending state,
then print all reasons in a comma separated list.
* Changes in Slurm 15.08.5
==========================
Brian Christiansen
committed
-- Prevent "scontrol update job" from updating jobs that have already finished.
-- Show requested TRES in "squeue -O tres" when job is pending.
-- Backfill scheduler: Test association and QOS node limits before reserving
resources for pending job.
-- burst_buffer/cray: If teardown operations fails, sleep and retry.
-- Clean up the external pids when using the PrologFlags=Contain feature
and the job finishes.
-- burst_buffer/cray: Support file staging when job lacks job-specific buffer
(i.e. only persistent burst buffers).
-- Added srun option of --bcast to copy executable file to compute nodes.
-- Fix for advanced reservation of burst buffer space.
-- BurstBuffer/cray: Add logic to terminate dw_wlm_cli child processes at
shutdown.
-- If job can't be launch or requeued, then terminate it.
-- BurstBuffer/cray: Enable clearing of burst buffer string on completed job
as a means of recovering from a failure mode.
-- Fix wrong memory free when parsing SrunPortRange=0-0 configuration.
-- BurstBuffer/cray: Fix job record purging if cancelled from pending state.
-- BGQ - Handle database throw correctly when syncing users on blocks.
-- MySQL - Make sure we don't have a NULL string returned when not
requesting any specific association.
-- sched/backfill: If max_rpc_cnt is configured and the backlog of RPCs has
not cleared after yielding locks, then continue to sleep.
-- Preserve the job dependency description displayed in 'scontrol show job'
even if the dependee jobs was terminated and cleaned causing the
dependent to never run because of DependencyNeverSatisfied.
-- Correct job task count calculation if only node count and ntasks-per-node
-- Make sure the association manager converts any string to be lower case
as all the associations from the database will be lower case.
-- Sanity check for xcgroup_delete() to verify incoming parameter is valid.
-- Fix formatting for sacct with variables that switched from uint32_t to
uint64_t.
-- Set up extern step to track any children of an ssh if it leaves anything
else behind.
-- Prevent slurmdbd divide by zero if no associations defined at rollup time.
-- Multifactor - Add sanity check to make sure pending jobs are handled
correctly when PriorityFlags=CALCULATE_RUNNING is set.
-- Add slurmdb_find_tres_count_in_string() to slurm db perl api.
-- Make lua dlopen() conditional on version found at build.
-- sched/backfill - Delay backfill scheduler for completing jobs only if
CompleteWait configuration parameter is set (make code match documentation).
-- Release a job's allocated licenses only after epilog runs on all nodes
rather than at start of termination process.
-- Cray job NHC delayed until after burst buffer released and epilog completes
on all allocated nodes.
-- Fix abort of srun if using PrologFlags=NoHold
-- Let devices step_extern cgroup inherit attributes of job cgroup.
Brian Christiansen
committed
-- Add new hook to Task plugin to be able to put adopted processes in the
step_extern cgroups.
-- Fix AllowUsers documentation in burst_buffer.conf man page. Usernames are
comma separated, not colon delimited.
-- Fix issue with time limit not being set correctly from a QOS when a job
requests no time limit.
-- In both sched/basic and backfill: If a job can not be started due to some
account/qos limit, then don't start other jobs which could delay jobs. The
old logic would skip the job and start other jobs, which could delay the
higher priority job.
-- select/cray: Prevent NHC from running more than once per job or step.
-- Fix fields not properly printed when adding an account through sacctmgr.
-- Update LBNL Node Health Check (NHC) link on FAQ.
-- Fix multifactor plugin to prevent slurmctld from getting segmentation fault
should the tres_alloc_cnt be NULL.
-- sbatch/salloc - Move nodelist logic before the time min_nodes is used
so we can set it correctly before tasks are set.
* Changes in Slurm 15.08.4
==========================
-- Fix typo for the "devices" cgroup subsystem in pam_slurm_adopt.c
-- Fix TRES_MAX flag to work correctly.
-- Added burst_buffer.conf flag parameter of "TeardownFailure" which will
teardown and remove a burst buffer after failed stage-in or stage-out.
By default, the buffer will be preserved for analysis and manual teardown.
-- Prevent a core dump in srun if the signal handler runs during the job
allocation causing the step context to be NULL.
-- Don't fail job if multiple prolog operations in progress at slurmctld
restart time.
-- Burst_buffer/cray: Fix to purge terminated jobs with burst buffer errors.
-- Burst_buffer/cray: Don't stall scheduling of other jobs while a stage-in
is in progress.
-- Make it possible to query 'extern' step with sstat.
-- Make 'extern' step show up in the database.
-- MYSQL - Quote assoc table name in mysql query.
-- Make SLURM_ARRAY_TASK_MIN, SLURM_ARRAY_TASK_MAX, and SLURM_ARRAY_TASK_STEP
environment variables available to PrologSlurmctld and EpilogSlurmctld.
-- Fix slurmctld bug in which a pending job array could be canceled
by a user different from the owner or the administrator.
-- Support taking node out of FUTURE state with "scontrol reconfig" command.
-- Sched/backfill: Fix to properly enforce SchedulerParameters of
bf_max_job_array_resv.
-- Enable operator to reset sdiag data.
-- jobcomp/elasticsearch plugin: Add array_job_id and array_task_id fields.
-- Remove duplicate #define IS_NODE_POWER_UP.
-- Added SchedulerParameters option of max_script_size.
-- Add REQUEST_ADD_EXTERN_PID option to add pid to the slurmstepd's extern
step.
Brian Christiansen
committed
-- Add unique identifiers to anchor tags in HTML generated from the man pages.
-- Add with_freeipmi option to spec file.
-- Minor elasticsearch code improvements
* Changes in Slurm 15.08.3
==========================
-- Correct Slurm's RPM build if Munge is not installed.
-- Job array termination status email ExitCode based upon highest exit code
from any task in the job array rather than the last task. Also change the
state from "Ended" or "Failed" to "Mixed" where appropriate.
-- Squeue recombines pending job array records only if their name and partition
are identical.
-- Fix some minor leaks in the job info and step info API.
-- Export missing QOS id when filling in association with the association
manager.
-- Fix invalid reference if a lua job_submit plugin references a default qos
when a user doesn't exist in the database.
-- Use association enforcement in the lua plugin.
-- Fix a few spots missing defines of accounting_enforce or acct_db_conn
in the plugins.
-- Show requested TRES in scontrol show jobs when job is pending.
-- Improve sched/backfill support for job features, especially XOR construct.
-- Correct scheduling logic for job features option with XOR construct that
could delay a job's initiation.
-- Remove unneeded frees when creating a tres string.
-- Send a tres_alloc_str for the batch step
-- Fix incorrect check for slurmdb_find_tres_count_in_string in various places,
it needed to check for INFINITE64 instead of zero.
-- Don't allow scontrol to create partitions with the name "DEFAULT".
-- burst_buffer/cray: Change error from "invalid request" to "permssion denied"
if a non-authorized user tries to create/destroy a persistent buffer.
-- PrologFlags work: Setting a flag of "Contain" implicitly sets the "Alloc"
flag. Fix code path which could prevent execution of the Prolog when the
"Alloc" or "Contain" flag were set.
-- Fix for acct_gather_energy/cray|ibmaem to work with missed enum.
-- MYSQL - When inserting a job and begin_time is 0 do not set it to
submit_time. 0 means the job isn't eligible yet so we need to treat it so.
-- MYSQL - Don't display ineligible jobs when querying for a window of time.
-- Fix creation of advanced reservation of cores on nodes which are DOWN.
-- Return permission denied if regular user tries to release job held by an
administrator.
-- MYSQL - Fix rollups for multiple jobs running by the same association
in an hour counting multiple times.
-- Burstbuffer/Cray plugin - Fix for persistent burst buffer use.
-- Modifications to pam_slurm_adopt to work correctly for the "extern" step.
-- Alphabetize debugflags when printing them out.
-- Fix systemd's slurmd service from killing slurmstepds on shutdown.
-- Fixed counter of not indexed jobs, error_cnt post-increment changed to
pre-increment.
* Changes in Slurm 15.08.2
==========================
-- Fix for tracking node state when jobs that have been allocated exclusive
access to nodes (i.e. entire nodes) and later relinquish some nodes. Nodes
would previously appear partly allocated and prevent use by other jobs.
-- Correct some cgroup paths ("step_batch" vs. "step_4294967294", "step_exter"
vs. "step_extern", and "step_extern" vs. "step_4294967295").
-- Fix advanced reservation core selection logic with network topology.
-- MYSQL - Remove restriction to have to be at least an operator to query TRES
values.
-- For pending jobs have sacct print 0 for nnodes instead of the bogus 2.
-- Fix for tracking node state when jobs that have been allocated exclusive
access to nodes (i.e. entire nodes) and later relinquish some nodes. Nodes
would previously appear partly allocated and prevent use by other jobs.
-- Fix updating job in db after extending job's timelimit past partition's
timelimit.
-- Fix srun -I<timeout> from flooding the controller with step create requests.
-- Requeue/hold batch job launch request if job already running (possible if
node went to DOWN state, but jobs remained active).
-- If a job's CPUs/task ratio is increased due to configured MaxMemPerCPU,
then increase it's allocated CPU count in order to enforce CPU limits.
-- Don't mark powered down node as not responding. This could be triggered by
race condition of the node suspend and ping logic, preventing use of the
node.
-- Don't requeue RPC going out from slurmctld to DOWN nodes (can generate
repeating communication errors).
-- Propagate sbatch "--dist=plane=#" option to srun.
-- Add acct_gather_energy/ibmaem plugin for systems with IBM Systems Director
Active Energy Manager.
-- Fix spec file to look for mariadb or mysql devel packages for build
requirements.
-- MySQL - Improve the code with asking for jobs in a suspended state.
-- Fix slurcmtld allowing root to see job steps using squeues -s.
-- Do not send burst buffer stage out email unless the job uses burst buffers.
-- Fix sacct to not return all jobs if the -j option is given with a trailing
','.
-- Permit job_submit plugin to set a job's priority.
-- Fix occasional srun segfault.
-- Fix issue with sacct, printing 0_0 for array's that had finished in the
database but the start record hadn't made it yet.
-- sacctmgr - Don't allow default account associations to be removed
from a user.
-- Fix sacct -j, (nothing but a comma) to not return all jobs.
-- Fixed slurmctld not sending cold-start messages correctly to the database
when a cold-start (-c) happens to the slurmctld.
Brian Christiansen
committed
-- Fix case where if the backup slurmdbd has existing connections when it gives
up control that the it would be killed.
-- Fix task/cgroup affinity to work correctly with multi-socket
single-threaded cores. A regression caused only 1 socket to be used on
this kind of node instead of all that were available.
-- MYSQL - Fix minor issue after an index was added to the database it would
previously take 2 restarts of the slurmdbd to make it stick correctly.
-- Add hv_to_qos_cond() and qos_rec_to_hv() functions to the Perl interface.
-- Add new burst_buffer.conf parameters: ValidateTimeout and OtherTimeout.
See man page for details.
-- Fix burst_buffer/cray support for interactive allocations >4GB.
-- Correct backfill scheduling logic for job with INFINITE time limit.
-- Fix issue on a scontrol reconfig all available GRES/TRES would be zeroed
out.
Brian Christiansen
committed
-- Set SLURM_HINT environment variable when --hint is used with sbatch or
salloc.
-- Add scancel -f/--full option to signal all steps including batch script and
all of its child processes.
-- Fix salloc -I to accept an argument.
-- Avoid reporting more allocated CPUs than exist on a node. This can be
triggered by resuming a previosly suspended job, resulting in
oversubscription of CPUs.
-- Fix the pty window manager in slurmstepd not to retry IO operation with
srun if it read EOF from the connection with it.
-- sbatch --ntasks option to take precedence over --ntasks-per-node plus node
count, as documented. Set SLURM_NTASKS/SLURM_NPROCS environment variables
accordingly.
-- MYSQL - Make sure suspended time is only subtracted from the CPU TRES
as it is the only TRES that can be given to another job while suspended.
-- Clarify how TRESBillingWeights operates on memory and burst buffers.
* Changes in Slurm 15.08.1
==========================
-- Fix test21.30 and 21.34 to check grpwall better.
-- Add time to the partition QOS the job is running on instead of just the
job QOS.
-- Print usage for GrpJobs, GrpSubmitJobs and GrpWall even if there is no
limit.
-- If AccountingEnforce=safe is set make sure a job can finish before going
over the limit with grpwall on a QOS or association.
-- burst_buffer/cray - Major updates based upon recent Cray changes.
-- Improve job state reason string when required nodes not available.
-- Fix missing else when packing an update partition message
Brian Christiansen
committed
-- Fix srun from inheriting the SLURM_CPU_BIND and SLURM_MEM_BIND environment
variables when running in an existing srun (e.g. an srun within an salloc).
-- Fix missing else when packing an update partition message.
-- Use more flexible mechnanism to find json installation.
-- Make sure safe_limits was initialized before processing limits in the
slurmctld.
-- Fix for burst_buffer/cray to parse type option correctly.
-- Fix memory error and version number in the nonstop plugin and reservation
code.
-- When requesting GRES in a step check for correct variable for the count.
-- Fix issue with GRES in steps so that if you have multiple exclusive steps
and you use all the GRES up instead of reporting the configuration isn't
available you hold the requesting step until the GRES is available.
-- MYSQL - Change debug to print out with DebugFlags=DB_Step instead of debug4
-- Simplify code when user is selecting a job/step/array id and removed
anomaly when only asking for 1 (task_id was never set to INFINITE).
-- MYSQL - If user is requesting various task_ids only return requested steps.
-- Fix issue when tres cnt for energy is 0 for total reported.
-- Resolved scalability issues of power adaptive scheduling with layouts.
-- Burst_buffer/cray bug - Fix teardown race condition that can result in
infinite loop.
-- Job "--reboot" option automatically, set's exclusive node mode.
-- Fix memory leak when using PrologFlags=Alloc.
-- Fix truncation of job reason in squeue.
-- If a node is in DOWN or DRAIN state, leave it unavailable for allocation
when powered down.
-- Update the slurm.conf man page documenting better nohold_on_prolog_fail
variable.
-- Don't trucate task ID information in "squeue --array/-r" or "sview".
-- Fix a bug which caused scontrol to core dump when releasing or
holding a job by name.
-- Fix unit conversion bug in slurmd which caused wrong memory calculation
for cgroups.
-- Fix issue with GRES in steps so that if you have multiple exclusive steps
and you use all the GRES up instead of reporting the configuration isn't
available you hold the requesting step until the GRES is available.
-- Fix slurmdbd backup to use DbdAddr when contacting the primary.
-- Fix error in MPI documentation.
-- Fix to handle arrays with respect to number of jobs submitted. Previously
only 1 job was accounted (against MaxSubmitJob) for when an array was
submitted.
-- Correct counting for job array limits, job count limit underflow possible
when master cancellation of master job record.
-- Combine 2 _valid_uid_gid functions into a single function to avoid
diversion.
-- Pending job array records will be combined into single line by default,
even if started and requeued or modified.
-- Fix sacct --format=nnodes to print out correct information for pending
jobs.
-- Make is so 'scontrol update job 1234 qos='' will set the qos back to
the default qos for the association.
-- Add [Alloc|Req]Nodes to sacct to be more like cpus.
-- Fix sacct documentation about [Alloc|Req]TRES
-- Put node count in TRES string for steps.
-- Fix issue with wrong protocol version when using the srun --no-allocate
option.
-- Fix TRES counts on GRES on a clean start of the slurmctld.
-- Add ability to change a job array's maximum running task count:
"scontrol update jobid=# arraytaskthrottle=#"
* Changes in Slurm 15.08.0
==========================
-- Fix issue with frontend systems (outside ALPs or BlueGene) where srun
wouldn't get the correct protocol version to launch a step.
-- Fix for message aggregation return rpcs where none of the messages are
intended for the head of the tree.
-- Fix segfault in sreport when there was no response from the dbd.
-- ALPS - Fix compile to not link against -ljob and -lexpat with every lib
or binary.
-- Fix testing for CR_Memory when CR_Memory and CR_ONE_TASK_PER_CORE are used
with select/linear.
-- When restarting or reconfiging the slurmctld, if job is completing handle
accounting correctly to avoid meaningless errors about overflow.
-- Add AccountingStorageTRES to scontrol show config
-- MySQL - Fix minor memory leak if a connection ever goes away whist using it.
-- ALPS - Make it so srun --hint=nomultithread works correctly.
-- Make MaxTRESPerUser work in sacctmgr.
-- Fix handling of requeued jobs with steps that are still finishing.
-- Cleaner copy for PriorityWeightTRES, it also fixes a core dump when trying
to free it otherwise.
-- Add environment variables SLURM_ARRAY_TASK_MAX, SLURM_ARRAY_TASK_MIN,
SLURM_ARRAY_TASK_STEP for job arrays.
-- Fix srun to use the NoInAddrAny TopologyParam option.
-- Change QOS flag name from PartitionQOS to OverPartQOS to be a better
description.
-- Make complete_batch_script RPC work with message aggregation.
-- Do not count slurmctld threads waiting in a "throttle" lock against the
daemon's thread limit as they are not contending for resources.
-- Modify slurmctld outgoing RPC logic to support more parallel tasks (up to
85 RPCs and 256 pthreads; the old logic supported up to 21 RPCs and 256
threads). This change can dramatically improve performance for RPCs
operating on small node counts.
-- Increase total backfill scheduler run time in stats_info_response_msg data
structure from 32 to 64 bits in order to prevent overflow.
-- Add NoInAddrAny option to TopologyParam in the slurm.conf which allows to
bind to the interface of return of gethostname instead of any address on
the node which avoid RSIP issues in Cray systems. This is most likely
useful in other systems as well.
-- Fix memory leak in Slurm::load_jobs perl api call.
-- Added --noconvert option to sacct, sstat, squeue and sinfo which allows
values to be displayed in their original unit types (e.g. 2048M won't be
converted to 2G).
-- Fix spelling of node_rescrs to node_resrcs in Perl API.
-- Fix node state race condition, UNKNOWN->IDLE without configuration info.
-- Cray: Disable LDAP references from slurmstepd on job launch due for
improved scalability.
-- Remove srun "read header error" due to application termination race
condition.
-- Optimize sacct queries with additional db indexes.
-- Add SLURM_TOPO_LEN env variable for scontrol show topology.
-- Add free_mem to node information.
-- Fix abort of batch launch if prolog is running, wait for prolog instead.
Brian Christiansen
committed
-- Fix case where job would get the wrong cpu count when using
--ntasks-per-core and --cpus-per-task together.
-- Add TRESBillingWeights to partitions in slurm.conf which allows taking into
consideration any TRES Type when calculating the usage of a job.
-- Add PriorityWeightTRES slurm.conf option to be able to configure priority
factors for TRES types.
* Changes in Slurm 15.08.0pre6
==============================
-- Add scontrol options to view and modify layouts tables.
-- Add MsgAggregationParams which controls a reverse tree to the slurmctld
which can be used to aggregate messages to the slurmctld into a single
message to reduce communication to the slurmctld. Currently only epilog
complete messages and node registration messages use this logic.
-- Add sacct and squeue options to print trackable resources.
-- Add sacctmgr option to display trackable resources.
-- If an salloc or srun command is executed on a "front-end" configuration,
that job will be assigned a slurmd shepherd daemon on the same host as used
to execute the command when possible rather than an slurmd daemon on an
arbitrary front-end node.
-- Add srun --accel-bind option to control how tasks are bound to GPUs and NIC
Generic RESources (GRES).
-- gres/nic plugin modified to set OMPI_MCA_btl_openib_if_include environment
variable based upon allocated devices (usable with OpenMPI and Melanox).
-- Make it so info options for srun/salloc/sbatch print with just 1 -v instead
of 4.
-- Add "no_backup_scheduling" SchedulerParameter to prevent jobs from being
scheduled when the backup takes over. Jobs can be submitted, modified and
cancelled while the backup is in control.
-- Enable native Slurm backup controller to reside on an external Cray node
when the "no_backup_scheduling" SchedulerParameter is used.
-- Removed TICKET_BASED fairshare. Consider using the FAIR_TREE algorithm.
-- Disable advanced reservation "REPLACE" option on IBM Bluegene systems.
-- Add support for control distribution of tasks across cores (in addition
to existing support for nodes and sockets, (e.g. "block", "cyclic" or
"fcyclic" task distribution at 3 levels in the hardware rather than 2).
-- Create db index on <cluster>_assoc_table.acct. Deleting accounts that didn't
have jobs in the job table could take a long time.
-- The performance of Profiling with HDF5 is improved. In addition, internal