Newer
Older
-- Burst_buffer/cray - Prevent slurmctld daemon abort if "paths" operation
fails. Now job will be held. Update job update time when held.
-- Fix issues with QOS flags Partition[Min|Max]Nodes to work correctly.
-- Increase number of ResumePrograms that can be managed without leaving
zombie/orphan processes from 10 to 100.
-- Refactor slurmctld agent logic to eliminate some pthreads.
* Changes in Slurm 16.05.9
==========================
-- Fix parsing of SBCAST_COMPRESS environment variable in sbcast.
-- Change some debug messages to errors in task/cgroup plugin.
-- backfill scheduler: Stop trying to determine expected start time for a job
after 2 seconds of wall time. This can happen if there are many running jobs
and a pending job can not be started soon.
-- Improve performance of cr_sort_part_rows() in cons_res plugin.
-- CRAY - Fix dealock issue when updating accounting in the slurmctld and
scheduling a Datawarp job.
-- Correct the job state accounting information for jobs requeued due to burst
buffer errors.
-- burst_buffer/cray - Avoid "pre_run" operation if not using buffer (i.e.
just creating or deleting a persistent burst buffer).
-- Fix slurm.spec file support for BlueGene builds.
-- Fix missing TRES read lock in acct_policy_job_runnable_pre_select() code.
Josh Samuelson
committed
-- Fix debug2 message printing value using wrong array index in
_qos_job_runnable_post_select().
-- Prevent job timeout on node power up.
-- MYSQL - Fix minor memory leak when querying steps and the sql fails.
-- Make it so sacctmgr accepts column headers like MaxTRESPU and not MaxTRESP.
-- Only look at SLURM_STEP_KILLED_MSG_NODE_ID on startup, to avoid race
condition later when looking at a steps env.
-- Make backfill scheduler behave like regular scheduler in respect to
'assoc_limit_stop'.
-- Allow a lower version client command to talk to a higher version contoller
using the multi-cluster options (e.g. squeue -M<clsuter>).
-- slurmctld/agent race condition fix: Prevent job launch while PrologSlurmctld
daemon is running or node boot in progress.
-- MYSQL - Fix a few other minor memory leaks when uncommon failures occur.
-- burst_buffer/cray - Fix race condition that could cause multiple batch job
launch requests resulting in drained nodes.
-- Correct logic to purge old reservations.
-- Fix DBD cache restore from previous versions.
-- Fix to logic for getting expected start time of existing job ID with
explicit begin time that is in the past.
-- Clear job's reason of "BeginTime" in a more timely fashion and/or prevents
them from being stuck in a PENDING state.
Alejandro Sanchez
committed
-- Make sure acct policy limits imposed on a job are correct after requeue.
* Changes in Slurm 16.05.8
==========================
-- Remove StoragePass from being printed out in the slurmdbd log at debug2
level.
-- Defer PATH search for task program until launch in slurmstepd.
-- Modify regression test1.89 to avoid leaving vestigial job. Also reduce
logging to reduce likelyhood of Expect buffer overflow.
-- Do not PATH search for mult-prog launches if LaunchParamters=test_exec is
enabled.
-- Fix for possible infinite loop in select/cons_res plugin when trying to
satisfy a job's ntasks_per_core or socket specification.
-- If job is held for bad constraints make it so once updated the job doesn't
go into JobAdminHeld.
-- sched/backfill - Fix logic to reserve resources for jobs that require a
node reboot (i.e. to change KNL mode) in order to start.
-- When unpacking a node or front_end record from state and the protocol
version is lower than the min version, set it to the min.
-- Remove redundant lookup for part_ptr when updating a reservation's nodes.
-- Fix memory and file descriptor leaks in slurmd daemon's sbcast logic.
-- Do not allocate specialized cores to jobs using the --exclusive option.
-- Cancel interactive job if Prolog failure with "PrologFlags=contain" or
"PrologFlags=alloc" configured. Send new error prolog failure message to
the salloc or srun command as needed.
-- Prevent possible out-of-bounds read in slurmstepd on an invalid #! line.
Dominik Bartkiewicz
committed
-- Fix check for PluginDir within slurmctld to work with multiple directories.
-- Cancel interactive jobs automatically on communication error to launching
srun/salloc process.
-- Fix security issue caused by insecure file path handling triggered by the
failure of a Prolog script. To exploit this a user needs to anticipate or
cause the Prolog to fail for their job. CVE-2016-10030.
* Changes in Slurm 16.05.7
==========================
-- Fix issue in the priority/multifactor plugin where on a slurmctld restart,
where more time is accounted for than should be allowed.
-- cray/busrt_buffer - If total_space in a pool decreases, reset used_space
rather than trying to account for buffer allocations in progress.
-- cray/busrt_buffer - Fix for double counting of used_space at slurmctld
startup.
-- Fix regression in 16.05.6 where if you request multiple cpus per task (-c2)
and request --ntasks-per-core=1 and only 1 task on the node
the slurmd would abort on an infinite loop fatal.
-- cray/busrt_buffer - Internally track both allocated and unusable space.
The reported UsedSpace in a pool is now the allocated space (previously was
unusable space). Base available space on whichever value leaves least free
space.
-- cray/burst_buffer - Preserve job ID and don't translate to job array ID.
-- cray/burst_buffer - Update "instance" parsing to match updated dw_wlm_cli
output.
-- sched/backfill - Insure we don't try to start a job that was already started
and requeued by the main scheduling logic.
-- job_submit/lua - add access to the job features field in job_record.
-- select/linear plugin modified to better support heterogeneous clusters when
topology/none is also configured.
-- Permit cancellation of jobs in configuring state.
-- acct_gather_energy/rapl - prevent segfault in slurmd from race to gather
data at slurmd startup.
-- Integrate node_feature/knl_generic with "hbm" GRES information.
-- Fix output routines to prevent rounding the TRES values for memory or BB.
-- switch/cray plugin - fix use after free error.
-- docs - elaborate on how way to clear TRES limits in sacctmgr.
-- knl_cray plugin - Avoid abort from backup slurmctld at start time.
-- cgroup plugins - fix two minor memory leaks.
-- If a node is booting for some job, don't allocate additional jobs to the
node until the boot completes.
-- testsuite - fix job id output in test17.39.
-- Modify backfill algorithm to improve performance with large numbers of
running jobs. Group running jobs that end in a "similar" time frame using a
time window that grows exponentially rather than linearly. After one second
of wall time, simulate the termination of all remaining running jobs in
order to respond in a reasonable time frame.
-- Fix slurm_job_cpus_allocated_str_on_node_id() API call.
-- sched/backfill plugin: Make malloc match data type (defined as uint32_t and
allocated as int).
Dominik Bartkiewicz
committed
-- srun - prevent segfault when terminating job step before step has launched.
Dominik Bartkiewicz
committed
-- sacctmgr - prevent segfault when trying to reset usage for an invalid
account name.
-- Make the openssl crypto plugin compile with openssl >= 1.1.
-- Fix SuspendExcNodes and SuspendExcParts on slurmctld reconfiguration.
-- sbcast - prevent segfault in slurmd due to race condition between file
transfers from separate jobs using zlib compression
-- cray/burst_buffer - Increase time to synchronize operations between threads
from 5 to 60 seconds ("setup" operation time observed over 17 seconds).
-- node_features/knl_cray - Fix possible race condition when changing node
state that could result in old KNL mode as an active features.
Dominik Bartkiewicz
committed
-- Make sure if a job can't run because of resources we also check accounting
limits after the node selection to make sure it doesn't violate those limits
and if it does change the reason for waiting so we don't reserve resources
on jobs violating accounting limits.
-- NRT - Make it so a system running against IBM's PE will work with PE
version 1.3.
-- NRT - Make it so protocols pgas and test are allowed to be used.
-- NRT - Make it so you can have more than 1 protocol listed in MP_MSG_API.
-- cray/burst_buffer - If slurmctld daemon restarts with pending job and burst
buffer having unknown file stage-in status, teardown the buffer, defer the
job, and start stage-in over again.
-- On state restore in the slurmctld don't overwrite the mem_spec_limit given
from the slurm.conf when using FastSchedule=0.
-- Recognize a KNL's proper NUMA count (rather than setting it to the value
in slurm.conf) when using FastSchedule=0.
-- Fix parsing in regression test1.92 for some prompts.
-- sbcast - use slurmd's gid cache rather than a separate lookup.
-- slurmd - return error if setgroups() call fails in _drop_privileges().
-- Remove error messages about gres counts changing when a job is resized on
a slurmctld restart or reconfig, as they aren't really error messages.
-- Fix possible memory corruption if a job is using GRES and changing size.
-- jobcomp/elasticsearch - fix printf format for a value on 32-bit builds.
-- task/cgroup - Change error message if CPU binding can not take place to
better identify the root cause of the problem.
-- Fix issue where task/cgroup would not always honor --cpu_bind=threads.
-- Fix race condition in with getgrouplist() in slurmd that can lead to
user accounts being granted access to incorrect group memberships during
job launch.
* Changes in Slurm 16.05.6
==========================
-- Docs - the correct default value for GroupUpdateForce is 0.
-- mpi/pmix - improve point to point communication performance.
-- SlurmDB - include pending jobs in search during 'sacctmgr show runawayjobs'.
-- Add client side out-of-range checks to --nice flag.
-- Fix support for sbatch "-W" option, previously eeded to use "--wait".
-- node_features/knl_cray plugin and capmc_suspend/resume programs modified to
sleep and retry capmc operations if the Cray State Manager is down. Added
CapmcRetries configuration parameter to knl_cray.conf.
-- node_features/knl_cray plugin: Remove any KNL MCDRAM or NUMA features from
node's configuration if capmc does NOT report the node as being KNL.
-- node_features/knl_cray plugin: drain any node not reported by
"capmc node_status" on startup or reconfig.
-- node_features/knl_cray plugin: Substantially streamline and speed up logic
to load current node state on reconfigure failure or unexpected node boot.
-- node_features/knl_cray plugin: Add separate thread to interact with capmc
in response to unexpected node reboots.
-- node_features plugin - Add "mode" argument to node_features_p_node_xlate()
function to fix some bugs updating a node's features using the node update
RPC.
-- node_features/knl_cray plugin: If the reconfiguration of nodes for an
interactive job fails, kill the job (it can't be requeued like a batch job).
-- Testsuite - Added srun/salloc/sbatch tests with --use-min-nodes option.
-- Fix typo when an error occurs when discovering pmix version on
configure.
-- Fix configuring pmix support when you have your lib dir symlinked to lib64.
-- Fix waiting reason if a job is waiting for a specific limit instead of
always just AccountingPolicy.
-- Correct SchedulerParameters=bf_busy_nodes logic with respect to the job's
minimum node count. Previous logic would not decremement counter in some
locations and reject valid job request for not reaching minimum node count.
-- Fix FreeBSD-11 build by using llabs() function in place of abs().
-- Cray: The slurmd can manipulate the socket/core/thread values reported based
upon the configuration. The logic failed to consider select/cray with
SelectTypeParameters=other_cons_res as equivalent to select/cons_res.
-- If a node's socket or core count are changed at registration time (e.g. a
KNL node's NUMA mode is changed), change it's board count to match.
-- Prevent possible divide by zero in select/cons_res if a node's board count
is higher than it's socket count.
-- Allow an advanced reservation to contain a license count of zero.
-- Preserve non-KNL node features when updating the KNL node features for a
multi-node job in which the non-KNL node features vary by node.
-- task/affinity plugin: Honor a job's --ntasks-per-socket and
--ntasks-per-core options in task binding.
-- slurmd - do not print ClusterName when using 'slurmd -C'.
-- Correct a bitmap test function (used only by the select/bluegene plugin).
-- Do not propagate SLURM_UMASK environment variable to batch script.
-- Added node_features/knl_generic plugin for KNL support on non-Cray systems.
-- Cray: Prevent abort in backfill scheduling logic for requeued job that has
been cancelled while NHC is running.
-- Improve reported estimates of start and end times for pending jobs.
-- pbsnodes: Show OS value as "unknown" for down nodes.
-- BlueGene - correctly scale node counts when enforcing MaxNodes limit take 2.
-- Fix "sbatch --hold" to set JobHeldUser correctly instead of JobHeldAdmin.
-- Cray - print warning that task/cgroup is required, and must be after
task/cray in the TaskPlugin settings.
-- Document that node Weight takes precedence over load with LLN scheduling.
Dominik Bartkiewicz
committed
-- Fix issue where gang scheduling could happen even with OverSubscribe=NO.
-- Expose JOB_SHARED_* values to job_submit/lua plugin.
-- Fix issue where number of nodes is not properly allocated when srun is
requested with -n tasks < hosts from -w hostlist.
-- Update srun documentation for -N, -w and -m arbitrary.
-- Fix bug that was clearing MAINT mode on nodes scheduled for reboot (bug
introduced in version 16.05.5 to address bug in overlapping reservations).
-- Add logging of node reboot requests.
-- Docs - remove recommendation for ReleaseAgent setting in cgroup.conf.
-- Make sure a job cleans up completely if it has a node fail. Mostly an
issue with gang scheduling.
* Changes in Slurm 16.05.5
==========================
-- Fix accounting for jobs requeued after the previous job was finished.
-- slurmstepd modified to pre-load all relevant plugins at startup to avoid
the possibility of modified plugins later resulting in inconsistent API
or data structures and a failure of slurmstepd.
-- Export functions from parse_time.c in libslurm.so.
-- Export unit convert functions from slurm_protocol_api.c in libslurm.so.
-- Fix scancel to allow multiple steps from a job to be cancelled at once.
-- Update and expand upgrade guide (in Quick Start Administrator web page).
-- burst_buffer/cray: Requeue, but do not hold a job which fails the pre_run
operation.
-- Insure reported expected job start time is not in the past for pending jobs.
-- Add support for PMIx v2.
-- mpi/pmix: support for passing TMPDIR path through info key
-- Cray: update slurmconfgen_smw.py script to correctly identify service nodes
versus compute nodes.
-- FreeBSD - fix build issue in knl_cray plugin.
-- Corrections to gres.conf parsing logic.
-- Make partition State independent of EnforcePartLimits value.
-- Fix multipart srun submission with EnforcePartLimits=NO and job violating
the partition limits.
-- Fix problem updating job state_reason.
-- pmix - Provide HWLOC topology in the job-data if Slurm was configured
with hwloc.
-- Cray - Fix issue restoring jobs when blade count increases due to hardware
reconfiguration.
-- burst_buffer/cray - Hold job after 3 failed pre-run operations.
-- sched/backfill - Check that a user's QOS is allowed to use a partition
before trying to schedule resources on that partition for the job.
-- sacctmgr - Fix displaying nodenames when printing out events or
reservations.
-- Fix mpiexec wrapper to accept task count with more than one digit.
-- Add mpiexec man page to the script.
-- Add salloc_wait_nodes option to the SchedulerParameters parameter in the
slurm.conf file controlling when the salloc command returns in relation to
when nodes are ready for use (i.e. booted).
-- Handle case when slurmctld daemon restart while compute node reboot in
progress. Return node to service rather than setting DOWN.
-- Preserve node "RESERVATION" state when one of multiple overlapping
reservations ends.
-- Restructure srun command locking for task_exit processing logic for improved
parallelism.
-- Modify srun task completion handling to only build the task/node string for
logging purposes if it is needed. Modified for performance purposes.
Alejandro Sanchez
committed
-- Docs - update salloc/sbatch/srun man pages to mention corresponding
environment variables for --mem/--mem-per-cpu and allowed suffixes.
Alejandro Sanchez
committed
-- Silence srun warning when overriding the job ntasks-per-node count
with a lower task count for the step.
-- Docs - assorted spelling fixes.
-- node_features/knl_cray: Fix bug where MCDRAM state could be taken from
capmc rather than cnselect.
-- node_features/knl_cray: If a node is rebooted outside of Slurm's direction,
update it's active features with current MCDRAM and NUMA mode information.
-- Restore ability to manually power down nodes, broken in 15.08.12.
-- Don't log error for job end_time being zero if node health check is still
running.
-- When powering up a node to change it's state (e.g. KNL NUMA or MCDRAM mode)
then pass to the ResumeProgram the job ID assigned to the nodes in the
SLURM_JOB_ID environment variable.
-- Allow a node's PowerUp state flag to be cleared using update_node RPC.
-- capmc_suspend/resume - If a request modify NUMA or MCDRAM state on a set of
nodes or reboot a set of nodes fails then just requeue the job and abort the
entire operation rather than trying to operate on individual nodes.
-- node_features/knl_cray plugin: Increase default CapmcTimeout parameter from
10 to 60 seconds.
-- Fix squeue filter by job license when a job has requested more than 1
license of a certain type.
-- Fix bug in PMIX_Ring in the pmi2 plugin so that it supports singleton mode.
It also updates the testpmixring.c test program so it can be used to check
singleton runs.
-- Automically clean up task/cgroup cpuset and devices cgroups after steps are
completed.
-- Testsuite - Fix test1.83 to handle gaps in node names properly.
Dominik Bartkiewicz
committed
-- BlueGene - correctly scale node counts when enforcing MaxNodes limit.
-- Make sure no attempt is made to schedule a requeued job until all steps are
cleaned (Node Health Check completes for all steps on a Cray).
-- KNL: Correct task affinity logic for some NUMA modes.
-- Add salloc/sbatch/srun --priority option of "TOP" to set job priority to
the highest possible value. This option is only available to Slurm operators
and administrators.
-- Add salloc/sbatch/srun option --use-min-nodes to prefer smaller node counts
when a range of node counts is specified (e.g. "-N 2-4").
-- Validate salloc/sbatch --wait-all-nodes argument.
-- Add "sbatch_wait_nodes" to SchedulerParameters to control default sbatch
behaviour with respect to waiting for all allocated nodes to be ready for
use. Job can override the configuration option using the --wait-all-nodes=#
option.
Tim Wickberg
committed
-- Prevent partition group access updates from resetting last_part_update when
no changes have been made. Prevents backfill scheduler from restarting
mid-cycle unnecessarily.
-- Cray - add NHC_ABSOLUTELY_NO to never run NHC, even on certain edge cases
that it would otherwise be run on with NHC_NO.
-- Ignore GRES/QOS updates that maintain the same value as before.
-- mpi/pmix - prepare temp directory for application.
-- Fix display for the nice and priority values in sprio/scontrol/squeue.
* Changes in Slurm 16.05.4
==========================
-- Fix potential deadlock if running with message aggregation.
-- Streamline when schedule() is called when running with message aggregation
on batch script completes.
-- Fix incorrect casting when [un]packing derived_ec on slurmdb_job_rec_t.
-- Document that persistent burst buffers can not be created or destroyed using
the salloc or srun --bb options.
-- Add support for setting the SLURM_JOB_ACCOUNT, SLURM_JOB_QOS and
SLURM_JOB_RESERVAION environment variables are set for the salloc command.
Document the same environment variables for the salloc, sbatch and srun
commands in their man pages.
-- Fix issue where sacctmgr load cluster.cfg wouldn't load associations
that had a partition in them.
-- Don't return the extern step from sstat by default.
-- In sstat print 'extern' instead of 4294967295 for the extern step.
-- Make advanced reservations work properly with core specialization.
-- Fix race condition in the account_gather plugin that could result in job
stuck in COMPLETING state.
-- Regression test fixes if SelectTypePlugin not managing memory and no node
memory size set (defaults to 1 MB per node).
Dominik Bartkiewicz
committed
-- Add missing partition write locks to _slurm_rpc_dump_nodes/node_single to
prevent a race condition leading to inconsistent sinfo results.
-- Fix task:CPU binding logic for some processors. This bug was introduced
in version 16.05.1 to address KNL bunding problem.
-- Fix two minor memory leaks in slurmctld.
-- Improve partition-specific limit logging from slurmctld daemon.
-- Fix incorrect access check when using MaxNodes setting on the partition.
Dominik Bartkiewicz
committed
-- Fix issue with sacctmgr when specifying a list of clusters to query.
-- Fix issue when calculating future StartTime for a job.
-- Make EnforcePartLimit support logic work with any ordering of partitions
in job submit request.
Tim Wickberg
committed
-- Prevent restoration of wrong CPU governor and frequency when using
multiple task plugins.
-- Prevent slurmd abort if hwloc library fails to populate the "children"
arrays (observed with hwloc version "dev-333-g85ea6e4").
-- burst_buffer/cray: Add "--groupid" to DataWarp "setup" command.
Iakovos Panourgias
committed
-- Fix lustre profiling putting it in the Filesystem dataset instead of the
Network dataset.
-- Fix profiling documentation and code to match be consistent with
Filesystem instead of Lustre.
-- Correct the way watts is calculated in the rapl plugin when using a poll
frequency other than AcctGatherNodeFreq.
-- Don't about step launch if job reaches expected end time while node is
configuring/booting (NOTE: The job end time will be adjusted after node
becomes ready for use).
Tim Wickberg
committed
-- Fix several print routines to respect a custom output delimiter when
printing NO_VAL or INFINITE.
-- Correct documented configurations where --ntasks-per-core and
--ntasks-per-socket are supported.
-- task/affinity plugin buffer allocated too small, can corrupt memory.
* Changes in Slurm 16.05.3
==========================
-- Make it so the extern step uses a reverse tree when cleaning up.
-- If extern step doesn't get added into the proctrack plugin make sure the
sleep is killed.
-- Fix areas the slurmctld can segfault if an extern step is in the system
cleaning up on a restart.
-- Prevent possible incorrect counting of GRES of a given type if a node has
the multiple "types" of a given GRES "name", which could over-subscribe
GRES of a given type.
-- Add web links to Slurm Diamond Collectors (from Harvard University) and
collectd (from EDF).
-- Add job_submit plugin for the "reboot" field.
-- Make some more Slurm constants (INFINITE, NO_VAL64, etc.) available to
job_submit/lua plugins.
-- Send in a -1 for a taskid into spank_task_post_fork for the extern_step.
-- MYSQL - Sightly better logic if a job completion comes in with an end time
of 0.
-- task/cgroup plugin is configured with ConstrainRAMSpace=yes, then set soft
memory limit to allocated memory limit (previously no soft limit was set).
-- Document limitations in burst buffer use by the salloc command (possible
access problems from a login node).
-- Fix proctrack plugin to only add the pid of a process once
(regression in 16.05.2).
-- Fix for sstat to print correct info when requesting jobid.batch as part of
a comma-separated list.
-- CRAY - Fix issue if pid has already been added to another job container.
-- CRAY - Fix add of extern step to AELD.
-- burstbufer/cray: avoid batch submit error condition if waiting for stagein.
-- CRAY - Fix for reporting steps lingering after they are already finished.
-- Testsuite - fix test1.29 / 17.15 for limits with values above 32-bits.
-- CRAY - Simplify when a NHC is called on a step that has unkillable
processes.
-- CRAY - If trying to kill a step and you have NHC_NO_STEPS set run NHC
anyway to attempt to log the backtraces of the potential
unkillable processes.
-- Fix gang scheduling and license release logic if single node job killed on
bad node.
-- Make scontrol show steps show the extern step correctly.
-- Do not scheduled powered down nodes in FAILED state.
-- Do not start slurmctld power_save thread until partition information is read
in order to prevent race condition that can result invalid pointer when
trying to resolve configured SuspendExcParts.
-- Add SLURM_PENDING_STEP id so it won't be confused with SLURM_EXTERN_CONT.
-- Fix for core selection with job --gres-flags=enforce-binding option.
Previous logic would in some cases allocate a job zero cores, resulting in
slurmctld abort.
-- Minimize preempted jobs for configurations with multiple jobs per node.
-- Improve partition AllowGroups caching. Update the table of UIDs permitted to
use a partition based upon it's AllowGroups configuration parameter as new
valid UIDs are found rather than looking up that user's group information
for every job they submit. If the user is now allowed to use the partition,
then do not check that user's group access again for 5 seconds.
-- Add routing queue information to Slurm FAQ web page.
-- Do not select_g_step_finish() a SLURM_PENDING_STEP step, as nothing has
been allocated for the step yet.
-- Fixed race condition in PMIx Fence logic.
-- Prevent slurmctld abort if job is killed or requeued while waiting for
reboot of its allocated compute nodes.
-- Treat invalid user ID in AllowUserBoot option of knl.conf file as error
rather than fatal (log and do not exit).
-- qsub - When doing the default output files for an array in qsub style
make them using the master job ID instead of the normal job ID.
-- Create the extern step while creating the job instead of waiting until the
end of the job to do it.
-- Always report a 0 exit code for the extern step instead of being canceled
or failed based on the signal that would always be killing it.
-- Fix to allow users to update QOS of pending jobs.
-- CRAY - Fix minor memory leak in switch plugin.
-- CRAY - Change slurmconfgen_smw.py to skip over disabled nodes.
-- Fix eligible_time for elasticsearch as well as add queue_wait
(difference between start of job and when it was eligible).
* Changes in Slurm 16.05.2
==========================
-- CRAY - Fix issue where the proctrack plugin could hang if the container
id wasn't able to be made.
-- Move test for job wait reason value of BurstBufferResources and
BurstBufferStageIn later in the scheduling logic.
-- Document which srun options apply to only job, only step, or job and step
allocations.
-- Use more compatible function to get thread name (>= 2.6.11).
-- Fix order of job then step id when noting cleaning flag being set.
-- Make it so the extern step sends a message with accounting information
back to the slurmctld.
-- Make it so the extern step calls the select_g_step_start|finish functions.
-- Don't print error when extern step is canceled because job is ending.
-- Handle a few error codes when dealing with the extern step to make sure
we have the pids added to the system correctly.
-- Add support for job dependencies with job array expressions. Previous logic
required listing each task of job array individually.
-- Make sure tres_cnt is set before creating a slurmdb_assoc_usage_t.
-- Prevent backfill scheduler from starting a second "singleton" job if another
one started during a backfill sleep.
-- Fix for invalid array pointer when creating advanced reservation when job
allocations span heterogeneous nodes (differing core or socket counts).
-- Fix hostlist_ranged_string_xmalloc_dims to correctly not put brackets on
hostlists when brackets == 0.
-- Make sure we don't get brackets when making a range of reserved ports
for a step.
-- Change fatal to an error if port ranges aren't correct when reading state
for steps.
* Changes in Slurm 16.05.1
==========================
-- Fix __cplusplus macro in spank.h to allow compilation with C++.
-- Fix compile issue with older glibc < 2.12
-- Fix for starting batch step with mpi/pmix plugin.
-- Fix for "scontrol -dd show job" with respect to displaying the specific
CPUs allocated to a job on each node. Prior logic would only display
the CPU information for the first node in the job allocation.
-- Print correct return code on failure to update active node features
through sview.
Tim Wickberg
committed
-- Allow QOS timelimit to override partition timelimit when EnforcePartLimits
is set to all/any.
-- Make it so qsub will do a "basename" on a wrapped command for the output
and error files.
-- Fix issue where slurmd could core when running the ipmi energy plugin.
-- Add logic so that slurmstepd can be launched under valgrind.
-- Increase buffer size to read /proc/*/stat files.
-- Fix for tracking job resource allocation when slurmctld is reconfigured
while Cray Node Health Check (NHC) is running. Previous logic would fail to
record the job's allocation then perform release operation upon NHC
completion, resulting in underflow error messages.
-- Make "scontrol show daemons" work with long node names.
-- CRAY - Collect energy using a uint64_t instead of uint32_t.
-- Fix incorrect if statements when determining if the user has a default
account or wckey.
-- Prevent job stuck in configuring state if slurmctld daemon restarted while
PrologSlurmctld is running. Also re-issue burst_buffer/pre-load operation
as needed.
-- Correct task affinity support for FreeBSD.
-- Fix for task affinity on KNL in SNC2/Flat mode.
-- Recalculate a job's memory allocation after node reboot if job requests all
of a node's memory and FastSchedule=0 is configured. Intel KNL memory size
can change on reboot with various MCDRAM modes.
-- Fix small memory leak when printing HealthCheckNodeState.
-- Eliminate memory leaks when AuthInfo is configured.
-- Cray/capmc_resume script modify a node's features (as needed) when the
reinit (reboot) command is issued rather than wait for the nodes to change
to the "on" state.
-- Correctly print ranges when using step values in job arrays.
-- Allow from file names / paths over 256 characters when launching steps,
as well as spaces in the executable name.
-- job_submit.license.lua example modified to send message back to user.
-- Document job --mem=0 option means all memory on a node.
-- Set SLURM_JOB_QOS environment variable to QOS name instead of description.
-- knl_cray.conf file option of CnselectPath added.
-- node_features/knl_cray plugin modified to get current node NUMA and MCDRAM
modes using cnselect command rather than capmc command.
-- liblua - add SLES12 paths to runtime search list.
-- Fix qsub default output and error files for task arrays.
-- Fix qsub to set job_name correctly when wrapping a script (-b y)
-- Cray - set EnforcePartLimits=any in slurm.conf template.
* Changes in Slurm 16.05.0
==========================
-- Update seff to fix warnings with ncpus, and list slurm-perlapi dependency
in spec file.
-- Fix testsuite to consistent use /usr/bin/env {bash,expect} construct.
-- Cray - Ensure that step completion messages get to the database.
-- Fix step cpus_per_task calculation for heterogeneous job allocation.
-- Fix --with-json= configure option to use specified path.
-- Add back thread_id to "thread_id" LogTimeFormat to distinguish between
mutliple threads with the same name. Now displays thread name and id.
-- Change how Slurm determines the NUMA count of a node. Ignore KNL NUMA
that only include memory.
-- Cray - Fix node list parsing in capmc_suspend/resume programs.
-- Fix sbatch #BSUB parsing for -W and -M options.
-- Fix GRES task layout bug that could cause slurmctld to abort.
-- Fix to --gres-flags=enforce-binding logic when multiple sockets needed.
-- Cray node shutdown/reboot scripts, perform operations on all nodes in one
capmc command. Only if that fails, issue the operations in parallel on
individual nodes. Required for scalability.
-- Cleanup two minor Coverity warnings.
-- Make it so the tres units in a job's formatted string are converted like
they are in a step.
-- Correct partition's MaxCPUsPerNode enforcement when nodes are shared by
multiple partitions.
-- node_feature/knl_cray - Prevent slurmctld GRES errors for "hbm" references.
-- Display thread name instead of thread id and remove process name in stderr
logging for "thread_id" LogTimeFormat.
-- Log IP address of bad incomming message to slurmctld.
-- If a user requests tasks, nodes and ntasks-per-node and
tasks-per-node/nodes != tasks print warning and ignore ntasks-per-node.
-- Release CPU "owner" file locks.
-- Fix for job step memory allocation: Reject invalid step at submit time
rather than leaving it queued.
-- Whenever possible, avoid allocating nodes that require a reboot.
-- Remove the SchedulerParameters option of "assoc_limit_continue", making it
the default value. Add option of "assoc_limit_stop". If "assoc_limit_stop"
is set and a job cannot start due to association limits, then do not attempt
to initiate any lower priority jobs in that partition. Setting this can
decrease system throughput and utlization, but avoid potentially starving
larger jobs by preventing them from launching indefinitely.
-- Update a node's socket and cores per socket counts as needed after a node
boot to reflect configuration changes which can occur on KNL processors.
Note that the node's total core count must not change, only the distribution
of cores across varying socket counts (KNL NUMA nodes treated as sockets by
Slurm).
-- Rename partition configuration from "Shared" to "OverSubscribe". Rename
salloc, sbatch, srun option from "--shared" to "--oversubscribe". The old
options will continue to function. Output field names also changed in
scontrol, sinfo, squeue and sview.
-- Add SLURM_UMASK environment variable to user job.
-- knl_conf: Added new configuration parameter of CapmcPollFreq.
-- squeue: remove errant spaces in column formats for "squeue -o %all".
-- Add ARRAY_TASKS mail option to send emails to each task in a job array.
-- Change default compression library for sbcast to lz4.
-- select/cray - Initiate step node health check at start of step termination
rather than after application completely ends so that NHC can capture
information about hung (non-killable) processes.
-- Add --units=[KMGTP] option to sacct to display values in specific unit type.
-- Modify sacct and sacctmgr to display TRES values in converted units.
-- Modify sacctmgr to accept TRES values with [KMGTP] suffixes.
-- Replace hash function with more modern SipHash functions.
-- Add "--with-cray_dir" build/configure option.
-- BB- Only send stage_out email when stage_out is set in script.
-- Add r/w locking to file_bcast receive functions in slurmd.
-- Add TopologyParam option of "TopoOptional" to optimize network topology
only for jobs requesting it.
-- Fix build on FreeBSD.
-- Configuration parameter "CpuFreqDef" used to set default governor for job
step not specifying --cpu-freq (previously the parameter was unused).
-- Fix sshare -o<format> to correctly display new lengths.
-- Update documentation to rename Shared option to OverSubscribe.
-- Update documentation to rename partition Priority option to PriorityTier.
-- Prevent changing of QOS on running jobs.
-- Update accounting when changing QOS on pending jobs.
-- Add support to ntasks_per_socket in task/affinity.
-- Generate init.d and systemd service scripts in etc/ through Make rather
than at configure time to ensure all variable substitutions happen.
-- Use TaskPluginParam for default task binding if no user specified CPU
binding. User --cpu_bind option takes precident over default. No longer
any error if user --cpu_bind option does not match TaskPluginParam.
-- Make sacct and sattach work with older slurmd versions.
-- Fix protocol handling between 15.08 and 16.05 for 'scontrol show config'.
-- Enable prefixes (e.g. info, debug, etc.) in slurmstepd debugging.
* Changes in Slurm 16.05.0pre2
==============================
-- Split partition's "Priority" field into "PriorityTier" (used to order
partitions for scheduling and preemption) plus "PriorityJobFactor" (used by
priority/multifactor plugin in calculating job priority, which is used to
order jobs within a partition for scheduling).
-- Revert call to getaddrinfo, restoring gethostbyaddr (introduced in Slurm
16.05.0pre1) which was failing on some systems.
-- knl_cray.conf - Added AllowMCDRAM, AllowNUMA and ALlowUserBoot
configuration options.
-- Add node_features_p_user_update() function to node_features plugin.
-- Don't print Weight=1 lines in 'scontrol write config' (its the default).
-- Remove PARAMS macro from slurm.h.
-- Remove BEGIN_C_DECLS and END_C_DECLS macros.
-- Check that PowerSave mode configured for node_features/knl_cray plugin.
It is required to reconfigure and reboot nodes.
-- Update documentation to reflect new cgroup default location change from
/cgroup to /sys/fs/cgroup.
-- If NodeHealthCheckProgram configured HealthCheckInterval is non-zero, then
modify slurmd to run it before registering with slurmctld.
-- Fix for tasks being packed onto cores when the requested --cpus-per-task is
greater than the number of threads on a core and --ntasks-per-core is 1.
-- Make it so jobs/steps track ':' named gres/tres, before hand gres/gpu:tesla
would only track gres/gpu, now it will track both gres/gpu and
gres/gpu:tesla as separate gres if configured like
AccountingStorageTRES=gres/gpu,gres/gpu:tesla
-- Added new job dependency type of "aftercorr" which will start a task of a
job array after the corresponding task of another job array completes.
-- Increase default MaxTasksPerNode configuration parameter from 128 to 512.
-- Enable sbcast data compression logic (compress option previously ignored).
-- Add --compress option to srun command for use with --bcast option.
-- Add TCPTimeout option to slurm[dbd].conf. Decouples MessageTimeout from TCP
connections.
-- Don't call primary controller for every RPC when backup is in control.
-- Add --gres-flags=enforce-binding option to salloc, sbatch and srun commands.
If set, the only CPUs available to the job will be those bound to the
selected GRES (i.e. the CPUs identifed in the gres.conf file will be
strictly enforced rather than advisory).
-- Change how a node's allocated CPU count is calculated to avoid double
counting CPUs allocated to multiple jobs at the same time.
-- Added SchedulingParameters option of "bf_min_prio_reserve". Jobs below
the specified threshold will not have resources reserved for them.
-- Added "sacctmgr show lostjobs" to report any orphaned jobs in the database.
-- When a stepd is about to shutdown and send it's response to srun
make the wait to return data only hit after 500 nodes and configurable
based on the TcpTimeout value.
-- Add functionality to reset the lft and rgt values of the association table
with the slurmdbd.
-- Add SchedulerParameter no_env_cache, if set no env cache will be use when
launching a job, instead the job will fail and drain the node if the env
isn't loaded normally.
* Changes in Slurm 16.05.0pre1
-- Add sbatch "--wait" option that waits for job completion before exiting.
Exit code will match that of spawned job.
-- Modify advanced reservation save/restore logic for core reservations to
support configuration changes (changes in configured nodes or cores counts).
Brian Christiansen
committed
-- Allow ControlMachine, BackupController, DbdHost and DbdBackupHost to be
either short or long hostname.
-- Job output and error files can now contain "%" character by specifying
a file name with two consecutive "%" characters. For example,
"sbatch -o "slurm.%%.%j" for job ID 123 will generate an output file named
"slurm.%.123".
-- Pass user name in Prolog RPC from controller to slurmd when using
PrologFlags=Alloc. Allows SLURM_JOB_USER env variable to be set when using
Native Slurm on a Cray.
-- Add "NumTasks" to job information visible to Slurm commands.
-- Add mail wrapper script "smail" that will include job statistics in email
notification messages.
-- Remove vestigial "SICP" job option (inter-cluster job option). Completely
different logic will be forthcoming.
Brian Christiansen
committed
-- Fix case where the primary and backup dbds would both be performing rollup.
-- Add an ack reply from slurmd to slurmstepd when job setup is done and the
job is ready to be executed.
-- Removed support for authd. authd has not been developed and supported since
-- Introduce a new parameter requeue_setup_env_fail in SchedulerParameters.
A job that fails to setup the environment will be requeued and the node
drained.
-- Add ValidateTimeout and OtherTimeout to "scontrol show burst" output.
-- Increase default sbcast buffer size from 512KB to 8MB.
-- Enable the hdf5 profiling of the batch step.
-- Eliminate redundant environment and script files for job arrays.
-- Stop searching sbatch scripts for #PBS directives after 100 lines of
non-comments. Stop parsing #PBS or #SLURM directives after 1024 characters
into a line. Required for decent perforamnce with huge scripts.
-- Add debug flag for timing Cray portions of the code.
-- Add Multi-Category Security (MCS) infrastructure to permit nodes to be bound
to specific users or groups.
-- Install the pmi2 unix sockets in slurmd spool directory instead of /tmp.
-- Implement the getaddrinfo and getnameinfo instead of gethostbyaddr and
gethostbyname.
-- Finished PMIx implementation.
-- Implemented the --without=package option for configure.
-- Fix sshare to show each individual cluster with -M,--clusters option.
-- Added --deadline option to salloc, sbatch and srun. Jobs which can not be
completed by the user specified deadline will be terminated with a state of
"Deadline" or "DL".
-- Implemented and documented PMIX protocol which is used to bootstrap an
MPI job. PMIX is an alternative to PMI and PMI2.
-- Change default CgroupMountpoint (in cgroup.conf) from "/cgroup" to
"/sys/fs/cgroup" to match current standard.
-- Add #BSUB options to sbatch to read in from the batch script.
-- HDF: Change group name of node from nodename to nodeid.
-- The partition-specific SelectTypeParameters parameter can now be used to
change the memory allocation tracking specification in the global
SelectTypeParameters configuration parameter. Supported partition-specific
values are CR_Core, CR_Core_Memory, CR_Socket and CR_Socket_Memory. If the
global SelectTypeParameters value includes memory allocation management and
the partition-specific value does not, then memory allocation management for
that partition will NOT be supported (i.e. memory can be over-allocated).
Likewise the global SelectTypeParameters might not include memory management
while the partition-specific value does.
-- Burst buffer/cray - Add support for multiple buffer pools including support
for different resource granularity by pool.
-- Burst buffer advanced reservation units treated as bytes (per documentation)
rather than GB.
-- Add an "scontrol top <jobid>" command to re-order the priorities of a user's
pending jobs. May be disabled with the "disable_user_top" option in the
SchedulerParameters configuration parameter.
-- Modify sview to display negative job nice values.
-- Increase job's nice value field from 16 to 32 bits.
-- Remove deprecated job_submit/cnode plugin.
-- Enhance slurm.conf option EnforcePartLimit to include options like "ANY" and
"ALL". "Any" is equivalent to "Yes" and "All" will check all partitions
a job is submitted to and if any partition limit is violated the job will
be rejected even if it could possibly run on another partition.
-- Add "features_act" field (currently active features) to the node
information. Output of scontrol, sinfo, and sview changed accordingly.
The field previously displayed as "Features" is now "AvailableFeatures"
while the new field is displayed as "ActiveFeatures".
-- Remove Sun Constellation, IBM Federation Switches (replaced by NRT switch
plugin) and long-defunct Quadrics Elan support.
-- Add -M<clusters> option to sreport.
Janne Blomqvist
committed
-- Rework group caching to work better in environments with
enumeration disabled. Removed CacheGroups config directive, group
membership lists are now always cached, controlled by
GroupUpdateTime parameter. GroupUpdateForce parameter default
value changed to 1.
-- Add reservation flag of "purge_comp" which will purge an advanced
reservation once it has no more active (pending, suspended or running) jobs.
-- Add new configuration parameter "KNLPlugins" and plugin infrastructure.
-- Add optional job "features" to node reboot RPC.
-- Add slurmd "-b" option to report node rebooted at daemon start time. Used
for testing purposes.
-- contribs/cray: Add framework for powering nodes up and down.
-- For job constraint, convert comma separator to "&".
-- Add Max*PerAccount options for QOS.
-- Protect slurm_mutex_* calls with abort() on failure.
* Changes in Slurm 15.08.14
===========================
-- For job resize, correct logic to build "resize" script with new values.
Previously the scripts were based upon the original job size.
* Changes in Slurm 15.08.13
===========================
-- Fix issue where slurmd could core when running the ipmi energy plugin.
-- Print correct return code on failure to update node features through sview.
-- Add logic so that slurmstepd can be launched under valgrind.
-- Increase buffer size to read /proc/*/stat files.
-- MYSQL - Handle ER_HOST_IS_BLOCKED better by failing when it occurs instead
of continuously printing the message over and over as the problem will
most likely not resolve itself.
-- Add --disable-bluegene to configure. This will make it so Slurm
can work on a BGAS node.
-- Prevent job stuck in configuring state if slurmctld daemon restarted while
PrologSlurmctld is running.
-- Handle association correctly if using FAIR_TREE as well as shares=Parent
-- Fix race condition when setting priority of a job and the association
doesn't have a parent.
-- MYSQL - Fix issue with adding a reservation if the name has single quotes in
it.
-- Correctly print ranges when using step values in job arrays.
-- Fix for invalid array pointer when creating advanced reservation when job
allocations span heterogeneous nodes (differing core or socket counts).
-- Fix for sstat to print correct info when requesting jobid.batch as part of
a comma-separated list.
-- Cray - Fix issue restoring jobs when blade count increases due to hardware
reconfiguration.
-- Ignore warnings about depricated functions. This is primarily there for
new glibc 2.24+ that depricates readdir_r.
-- Fix security issue caused by insecure file path handling triggered by the
failure of a Prolog script. To exploit this a user needs to anticipate or
cause the Prolog to fail for their job. CVE-2016-10030.
===========================
-- Do not attempt to power down a node which has never responded if the
slurmctld daemon restarts without state.
-- Fix for possible slurmstepd segfault on invalid user ID.
-- MySQL - Fix for possible race condition when archiving multiple clusters
at the same time.
-- Fix compile for when you don't have hwloc.
-- Fix issue where daemons would only listen on specific address given in
slurm.conf instead of all. If looking for specific addresses use
TopologyParam options No*InAddrAny.
-- Cray - Better robustness when dealing with the aeld interface.
-- job_submit.lua - add array_inx value for job arrays.
-- Perlapi - Remove unneeded/undefined mutex.
-- Fix issue when TopologyParam=NoInAddrAny is set the responses wouldn't
make it to the slurmctld when using message aggregation.
-- MySQL - Fix potential memory leak when rolling up data.
-- Fix issue with clustername file when running on NFS with root_squash.
-- Fix race condition with respects to cleaning up the profiling threads
when in use.
-- Fix issues when building on NetBSD.
Tim Wickberg
committed
-- Fix jobcomp/elasticsearch build when libcurl is installed in a
non-standard location.
Alejandro Sanchez
committed
-- Fix MemSpecLimit to explicitly require TaskPlugin=task/cgroup and
ConstrainRAMSpace set in cgroup.conf.
-- MYSQL - Fix order of operations issue where if the database is locked up
and the slurmctld doesn't wait long enough for the response it would give
up leaving the connection open and create a situation where the next message
sent could receive the response of the first one.
-- Fix CFULL_BLOCK distribution type.
Tim Wickberg
committed
-- Prevent sbatch from trying to enable debug messages when using job arrays.
-- Prevent sbcast from enabling "--preserve" when specifying a jobid.
-- Prevent wrong error message from spank plugin stack on GLOB_NOSPACE error.
-- Fix proctrack/lua plugin to prevent possible deadlock.
Tim Wickberg
committed
-- Prevent infinite loop in slurmstepd if execve fails.
-- Prevent multiple responses to REQUEST_UPDATE_JOB_STEP message.
-- Prevent possible deadlock in acct_gather_filesystem/lustre on error.
-- Make it so --mail-type=NONE didn't throw an invalid error.
-- If no default account is given for a user when creating (only a list of
accounts) no default account is printed, previously NULL was printed.
-- Fix for tracking a node's allocated CPUs with gang scheduling.
-- Fix Hidden error during _rpc_forward_data call.
-- Fix bug resulting from wrong order-of-operations in _connect_srun_cr(),
and two others that cause incorrect debug messages.
-- Fix backwards compatibility with sreport going to <= 14.11 coming from
>= 15.08 for some reports.
* Changes in Slurm 15.08.11
===========================
-- Fix for job "--contiguous" option that could cause job allocation/launch
failure or slurmctld crash.
-- Fix to setup logs for single-character program names correctly.
-- Backfill scheduling performance enhancement with large number of running
jobs.
-- Reset job's prolog_running counter on slurmctld restart or reconfigure.
-- burst_buffer/cray - Update job's prolog_running counter if pre_run fails.
-- MYSQL - Make the error message more specific when removing a reservation
and it doesn't meet basic requirements.
-- burst_buffer/cray - Fix for script creating or deleting persistent buffer
would fail "paths" operation and hold the job.
-- power/cray - Prevent possible divide by zero.
-- power/cray - Fix bug introduced in 15.08.10 preventin operation in many
cases.
-- Prevent deadlock for flow of data to the slurmdbd when sending reservation
that wasn't set up correctly.
-- burst_buffer/cray - Don't call Datawarp "paths" function if script includes
only create or destroy of persistent burst buffer. Some versions of Datawarp
software return an error for such scripts, causing the job to be held.
-- Fix potential issue when adding and removing TRES which could result
in the slurmdbd segfaulting.
-- Add cast to memory limit calculation to prevent integer overflow for
very large memory values.
-- Bluegene - Fix issue with reservations resizing under the covers on a
restart of the slurmctld.
-- Avoid error message of "Requested cpu_bind option requires entire node to
be allocated; disabling affinity" being generated in some cases where
task/affinity and task/cgroup plugins used together.
-- Fix version issue when packing GRES information between 2 different versions
of Slurm.
-- Fix for srun hanging with OpenMPI and PMIx
-- Better initialization of node_ptr when dealing with protocol_version.
-- Fix incorrect type when initializing header of a message.
-- MYSQL - Fix incorrect usage of limit and union.
-- MYSQL - Remove 'ignore' from alter ignore when updating a table.
-- Documentation - update prolog_epilog page to reflect current behavior
if the Prolog fails.
-- Documentation - clarify behavior of 'srun --export=NONE' in man page.
-- Fix potential gres underflow on restart of slurmctld.
-- Fix sacctmgr to remove a user who has no associations.
* Changes in Slurm 15.08.10
===========================
-- Fix issue where if a slurmdbd rollup lasted longer than 1 hour the
rollup would effectively never run again.
Matthieu Hautreux
committed
-- Make error message in the pmi2 code to debug as the issue can be expected
and retries are done making the error message a little misleading.
-- Power/cray: Don't specify NID list to Cray APIs. If any of those nodes are
not in a ready state, the API returned an error for ALL nodes rather than
valid data for nodes in ready state.
-- Fix potential divide by zero when tree_width=1.
-- checkpoint/blcr plugin: Fix memory leak.
-- If using PrologFlags=contain: Don't launch the extern step if a job is
cancelled while launching.
-- Remove duplicates from AccountingStorageTRES
-- Fix backfill scheduler race condition that could cause invalid pointer in
select/cons_res plugin. Bug introduced in 15.08.9.
-- Avoid double calculation on partition QOS if the job is using the same QOS.
-- Do not change a job's time limit when updating unrelated field in a job.
-- Fix situation on a heterogeneous memory cluster where the order of
constraints mattered in a job.
* Changes in Slurm 15.08.9
==========================
-- BurstBuffer/cray - Defer job cancellation or time limit while "pre-run"
operation in progress to avoid inconsistent state due to multiple calls
to job termination functions.
-- Fix issue with resizing jobs and limits not be kept track of correctly.
-- BGQ - Remove redeclaration of job_read_lock.
-- BGQ - Tighter locks around structures when nodes/cables change state.
-- Make it possible to change CPUsPerTask with scontrol.
-- Make it so scontrol update part qos= will take away a partition QOS from
a partition.
-- Fix issue where SocketsPerBoard didn't translate to Sockets when CPUS=
was also given.
-- Add note to slurm.conf man page about setting "--cpu_bind=no" as part
of SallocDefaultCommand if a TaskPlugin is in use.
-- Set correct reason when a QOS' MaxTresMins is violated.
-- Insure that a job is completely launched before trying to suspend it.
-- Remove historical presentations and design notes. Only distribute
maintained doc/html and doc/man directories.
-- Remove duplicate xmalloc() in task/cgroup plugin.
-- Backfill scheduler to validate correct job partition for job submitted to
multiple partitions.
-- Force close on exec on first 256 file descriptors when launching a
slurmstepd to close potential open ones.
-- Step GRES value changed from type "int" to "int64_t" to support larger
values.
-- Fix getting reservations to database when database is down.
-- Fix issue with sbcast not doing a correct fanout.
-- Fix issue where steps weren't always getting the gres/tres involved.
-- Fixed double read lock on getting job's gres/tres.
-- Fix display for RoutePlugin parameter to display the correct value.
-- Fix route/topology plugin to prevent segfault in sbcast when in use.
-- Fix Cray slurmconfgen_smw.py script to use nid as nid, not nic.
-- Fix Cray NHC spawning on job requeue. Previous logic would leave nodes
allocated to a requeued job as non-usable on job termination.
-- burst_buffer/cray plugin: Prevent a requeued job from being restarted while
file stage-out is still in progress. Previous logic could restart the job
and not perform a new stage-in.
-- Fix job array formatting to allow return [0-100:2] display for arrays with
step functions rather than [0,2,4,6,8,...] .
-- FreeBSD - replace Linux-specific set_oom_adj to avoid errors in slurmd log.
-- Add option for TopologyParam=NoInAddrAnyCtld to make the slurmctld listen
on only one port like TopologyParam=NoInAddrAny does for everything else.
-- Fix burst buffer plugin to prevent corruption of the CPU TRES data when bb
is not set as an AccountingStorageTRES type.
-- Surpress error messages in acct_gather_energy/ipmi plugin after repeated
failures.
-- Change burst buffer use completion email message from
"SLURM Job_id=1360353 Name=tmp Staged Out, StageOut time 00:01:47" to
"SLURM Job_id=1360353 Name=tmp StageOut/Teardown time 00:01:47"
-- Generate burst buffer use completion email immediately afer teardown
completes rather than at job purge time (likely minutes later).
-- Fix issue when adding a new TRES to AccountingStorageTRES for the first
time.
-- Update gang scheduling tables when job manually suspended or resumed. Prior
logic could mess up job suspend/resume sequencing.
-- Update gang scheduling data structures when job changes in size.
-- Associations - prevent hash table corruption if uid initially unset for
a user, which can cause slurmctld to crash if that user is deleted.
-- Avoid possibly aborting srun on SIGSTOP while creating the job step due to
threading bug.
-- Fix deadlock issue with burst_buffer/cray when a newly created burst
buffer is found.
-- burst_buffer/cray: Set environment variables just before starting job rather
than at job submission time to reflect persistent buffers created or
modified while the job is pending.
-- Fix check of per-user qos limits on the initial run by a user.
-- Fix gang scheduling resource selection bug which could prevent multiple jobs
from being allocated the same resources. Bug was introduced in 15.08.6.
-- Don't print the Rgt value of an association from the cache as it isn't
kept up to date.
-- burst_buffer/cray - If the pre-run operation fails then don't issue