NEWS

This file describes changes in recent versions of Slurm. It primarily
documents those changes that are of interest to users and administrators.

* Changes in Slurm 17.11.10
===========================
 -- Move priority_sort_part_tier from slurmctld to libslurm to make it possible
    to run the regression tests 24.* without changing that code since it links
    directly to the priority plugin where that function isn't defined.
 -- Fix issue where job time limits can increase to max walltime when updating
    a job with scontrol.
 -- Fix invalid protocol_version manipulation on big endian platforms causing
    srun and sattach to fail.
 -- Fix for QOS, Reservation and Alias env variables in srun.
 -- mpi/pmi2 - Backport 6a702158b49c4 from 18.08 to avoid dangerous detached
    thread.
 -- When allowing heterogeneous steps make sure we copy all the options to
    avoid copying strings that may be overwritten.
 -- Print correctly when sh5util finds and empty file.
 -- Fix sh5util to not seg fault on exit.
 -- Fix sh5util to check correctly for H5free_memory.
 -- Adjust OOM monitoring function in task/cgroup to prevent problems in
    regression suite from leaked file descriptors.
 -- Fix issue with gres when defined with a type and no count
    (i.e. gres=gpu/tesla) it would get a count of 0.
 -- Allow sstat to talk to slurmd's that are new in protocol version.
 -- Permit database names over 33 characters in accounting_storage/mysql.

* Changes in Slurm 17.11.9-2
============================
 -- Fix printing of node state "drain + reboot" (and other node state flags).
 -- Fix invalid read (segfault) when sorting multi-partition jobs.
 -- Move several new error() messages to debug() to keep them out of users'
    srun output.

* Changes in Slurm 17.11.9
==========================
 -- Fix segfault in slurmctld when a job's node bitmap is NULL during a
    scheduling cycle.  Primarily caused by EnforcePartLimits=ALL.
 -- Remove erroneous unlock in acct_gather_energy/ipmi.
 -- Enable support for hwloc version 2.0.1.
 -- Fix 'srun -q' (--qos) option handling.
 -- Fix socket communication issue that can lead to lost task completition
    messages, which will cause a permanently stuck srun process.
 -- Handle creation of TMPDIR if environment variable is set or changed in
    a task prolog script.
 -- Avoid node layout fragmentation if running with a fixed CPU count but
    without Sockets and CoresPerSocket defined.
 -- burst_buffer/cray - Fix datawarp swap default pool overriding jobdw.
 -- Fix incorrect job priority assignment for multi-partition job with
    different PriorityTier settings on the partitions.
 -- Fix sinfo to print correct node state.

* Changes in Slurm 17.11.8
==========================
 -- Fix incomplete RESPONSE_[RESOURCE|JOB_PACK]_ALLOCATION building path.
 -- Do not allocate nodes that were marked down due to the node not responding
    by ResumeTimeout.
 -- task/cray plugin - search for "mems" cgroup information in the file
    "cpuset.mems" then fall back to the file "mems".
 -- Fix ipmi profile debug uninitialized variable.
 -- Improve detection of Lua package on older RHEL distributions.
 -- PMIx: fixed the direct connect inline msg sending.
 -- MYSQL: Fix issue not handling all fields when loading an archive dump.
 -- Allow a job_submit plugin to change the admin_comment field during
    job_submit_plugin_modify().
 -- job_submit/lua - fix access into reservation table.
 -- MySQL - Prevent deadlock caused by archive logic locking reads.
 -- Don't enforce MaxQueryTimeRange when requesting specific jobs.
 -- Modify --test-only logic to properly support jobs submitted to more than
    one partition.
 -- Prevent slurmctld from abort when attempting to set non-existing
    qos as def_qos_id.
 -- Add new job dependency type of "afterburstbuffer". The pending job will be
    delayed until the first job completes execution and it's burst buffer
    stage-out is completed.
 -- Reorder proctrack/task plugin load in the slurmstepd to match that of slurmd
    and avoid race condition calling task before proctrack can introduce.
 -- Prevent reboot of a busy KNL node when requesting inactive features.
 -- Revert to previous behavior when requesting memory per cpu/node introduced
    in 17.11.7.
 -- Fix to reinitialize previously adjusted job members to their original value
    when validating the job memory in multi-partition requests.
 -- Fix _step_signal() from always returning SLURM_SUCCESS.
 -- Combine active and available node feature change logs on one line rather
    than one line per node for performance reasons.
 -- Prevent occasionally leaking freezer cgroups.
 -- Fix potential segfault when closing the mpi/pmi2 plugin.
 -- Fix issues with --exclusive=[user|mcs] to work correctly
    with preemption or when job requests a specific list of hosts.
 -- Make code compile with hdf5 1.10.2+
 -- mpi/pmix: Fixed the collectives canceling.
 -- SlurmDBD: improve error message handling on archive load failure.
 -- Fix incorrect locking when deleting reservations.
 -- Fix incorrect locking when setting up the power save module.
 -- Fix setting format output length for squeue when showing array jobs.
 -- Add xstrstr function.
 -- Fix printing out of --hint options in sbatch, salloc --help.
 -- Prevent possible divide by zero in _validate_time_limit().
 -- Add Delegate=yes to the slurmd.service file to prevent systemd from
    interfering with the jobs' cgroup hierarchies.
 -- Change the backlog argument to the listen() syscall within srun to 4096
    to match elsewhere in the code, and avoid communication problems at scale.

* Changes in Slurm 17.11.7
==========================
 -- Fix for possible slurmctld daemon abort with NULL pointer.
 -- Fix different issues when requesting memory per cpu/node.
 -- PMIx - override default paths at configure time if --with-pmix is used.
 -- Have sprio display jobs before eligible time when
    PriorityFlags=ACCRUE_ALWAYS is set.
 -- Make sure locks are always in place when calling _post_qos_list().
 -- Notify srun and ctld when unkillable stepd exits.
 -- Fix slurmstepd deadlock in stepd cleanup caused by race condition in
    the jobacct_gather fini() interfaces introduced in 17.11.6.
 -- Fix slurmstepd deadlock in PMIx startup.
 -- task/cgroup - fix invalid free() if the hwloc library does not return a
    string as expected.
 -- Fix insecure handling of job requested gid field. CVE-2018-10995.
 -- Add --without x11 option to rpmbuild in slurm.spec.

* Changes in Slurm 17.11.6
==========================
 -- CRAY - Add slurmsmwd to the contribs/cray dir.
 -- sview - fix crash when closing any search dialog.
 -- Fix initialization of variable in stepd when using native x11.
 -- Fix reading slurm_io_init_msg to handle partial messages.
 -- Fix scontrol create res segfault when wrong user/account parameters given.
 -- Fix documentation for sacct on parameter -X (--allocations)
 -- Change TRES Weights debug messages to debug3.
 -- FreeBSD - assorted fixes to restore build.
 -- Fix for not tracking environment variables from unrelated different jobs.
 -- PMIX - Added the direct connect authentication.
    When upgrading this may cause issues with jobs using pmix starting on mixed
    slurmstepd versions where some are less than 17.11.6.
 -- Prevent the backup slurmctld from losing the active/available node
    features list on takeover.
 -- Add documentation for fix IDLE*+POWER due to capmc stuck in Cray systems.
 -- Fix missing mutex unlock when prolog is failing on a node, leading to a
    hung slurmd.
 -- Fix locking around Cray CCM prolog/epilog.
 -- Add missing fed_mgr read locks.
 -- Fix issue incorrectly setting a job time_start to 0 while requeueing.
 -- smail - remove stray '-s' from mail subject line.
 -- srun - prevent segfault if ClusterName setting is unset but
    SLURM_WORKING_CLUSTER environment variable is defined.
 -- In configurator.html web pages change default configuration from
    task/none to task/affinity plugin and from select/linear plugin to
    select/cons_res plus CR_Core.
 -- Allow jobs to run beyond a FLEX reservation end time.
 -- Fix problem with wrongly set as Reservation job state_reason.
 -- Prevent bit_ffs() from returnig value out of bitmap range.
 -- Improve performance of 'squeue -u' when PrivateData=jobs is enabled.
 -- Make UnavailableNodes value in job reason be correct for each job.
 -- Fix 'squeue -o %s' on Cray systems.
 -- Fix incorrect error thrown when cancelling part of a job array.
 -- Fix error code and scheduling problem for --exclusive=[user|mcs].
 -- Fix build when lz4 is in a non-standard location.
 -- Be able to force power_down of cloud node even if in power_save state.
 -- Allow cloud nodes to be recognized in Slurm when booted out of band.
 -- Fixes race condition in _pack_job_gres() when is called multiple times.
 -- Increase duration of "sleep" command used to keep extern step alive.
 -- Remove unsafe usage of pthread_cancel in slurmstepd that can lead to
    to deadlock in glibc.
 -- Fix total TRES Billing on partitions.
 -- Don't tear down a BB if a node fails and --no-kill or resize of a job
    happens.
 -- Remove unsafe usage of pthread_cancel in pmix plugin that can lead to
    to deadlock in glibc.
 -- Fix fatal in controller when loading completed trigger
 -- Ignore reservation overlap at submission time.
 -- GRES type model and QOS limits documentation added
 -- slurmd - fix ABRT on SIGINT after reconfigure with MemSpecLimit set.
 -- PMIx - move two error messages on retry to debug level, and only display
    the error after the retry count has been exceeded.
 -- Increase number of tries when sending responses to srun.
 -- Fix checkpointing requeued/completing jobs in a bad state which caused a
    segfault on restart.
 -- Fix srun on ppc64 platforms.
 -- Prevent slurmd from starting steps if the Prolog returns an error when using
    PrologFlags=alloc.
 -- priority/multifactor - prevent segfault running sprio if a partition has
    just been deleted and PriorityFlags=CALCULATE_RUNNING is turned on.
 -- job_submit/lua - add ESLURM_INVALID_TIME_LIMIT return code value.
 -- job_submit/lua - print an error if the script calls log.user in
    job_modify() instead of returning it to the next submitted job erroneously.
 -- select/linear - handle job resize correctly.
 -- select/cons_res - improve handling of --cores-per-socket requests.

* Changes in Slurm 17.11.5
==========================
 -- Fix cloud nodes getting stuck in DOWN+POWER_UP+NO_RESPOND state after not
    responding by ResumeTimeout.
 -- Add job's array_task_cnt and user_name along with partitions
    [max|def]_mem_per_[cpu|node], max_cpus_per_node, and max_share with the
    SHARED_FORCE definition to the job_submit/lua plugin.
 -- srun - fix for SLURM_JOB_NUM_NODES env variable assignment.
 -- sacctmgr - fix runaway jobs identification.
 -- Fix for setting always the correct status on job update in mysql.
 -- Fix issue if running with an association manager cache (slurmdbd was down
    when slurmctld was started) you could loose QOS usage information.
 -- CRAY - Fix spec file to work correctly.
 -- Set scontrol exit code to 1 if attempting to update a node state to DRAIN
    or DOWN without specifying a reason.
 -- Fix race condition when running with an association manager cache
    (slurmdbd was down when slurmctld was started).
 -- Print out missing SLURM_PERSIST_INIT slurmdbd message type.
 -- Fix two build errors related to use of the O_CLOEXEC flag with older glibc.
 -- Add Google Cloud Platform integration scripts into contribs directory.
 -- Fix minor potential memory leak in backfill plugin.
 -- Add missing node flags (maint/power/etc) to node states.
 -- Fix issue where job time limits may end up at 1 minute when using the
    NoReserve flag on their QOS.
 -- Fix security issue in accounting_storage/mysql plugin by always escaping
    strings within the slurmdbd. CVE-2018-7033.
 -- Soften messages about best_fit topology to debug2 to avoid alarm.
 -- Fix issue in sreport reservation utilization report to handle more
    allocated time than 100% (Flex reservations).
 -- When a job is requesting a Flex reservation prefer the reservation's nodes
    over any other nodes.

* Changes in Slurm 17.11.4
==========================
 -- Add fatal_abort() function to be able to get core dumps if we hit an
    "impossible" edge case.
 -- Link slurmd against all libraries that slurmstepd links to.
 -- Fix limits enforce order when they're set at partition and other levels.
 -- Add slurm_load_single_node() function to the Perl API.
 -- slurm.spec - change dependency for --with lua to use pkgconfig.
 -- Fix small memory leaks in node_features plugins on reconfigure.
 -- slurmdbd - only permit requests to update resources from operators or
    administrators.
 -- Fix handling of partial writes in io_init_msg_write_to_fd() which can
    lead to job step launch failure under higher cluster loads.
 -- MYSQL - Fix to handle quotes in a given work_dir of a job.
 -- sbcast - fix a race condition that leads to "Unspecified error".
 -- Log that support for the ChosLoc configuration parameter will end in Slurm
    version 18.08.
 -- Fix backfill performance issue where bf_min_prio_reserve was not respected.
 -- Fix MaxQueryTimeRange checks.
 -- Print MaxQueryTimeRange in "sacctmgr show config".
 -- Correctly check return codes when creating a step to check if needing to
    wait to retry or not.
 -- Fix issue where a job could be denied by Reason=MaxMemPerLimit when not
    requesting any tasks.
 -- In perl tools, fix for regexp that caused extra incorrectly shown results.
 -- Add some extra locks in fed_mgr to be extra safe.
 -- Minor memory leak fixes in the fed_mgr on slurmctld shutdown.
 -- Make sreport job reports also report duplicate jobs correctly.
 -- Fix issues restoring certain Partition configuration elements, especially
    when ReconfigFlags=KeepPartInfo is enabled.
 -- Don't add TRES whose value is NO_VAL64 when building string line.
 -- Fix removing array jobs from hash in slurmctld.
 -- Print out missing user messages from jobsubmit plugin when srun/salloc are
    waiting for an allocation.
 -- Handle --clusters=all as case insensitive.
 -- Only check requested clusters in federation when using --test-only
    submission option.
 -- In the federation, make it so you can cancel stranded sibling jobs.
 -- Silence an error from PSS memory stat collection process.
 -- Requeue jobs allocated to nodes requested to DRAIN or FAIL if nodes are
    POWER_SAVE or POWER_UP, preventing jobs to start on NHC-failed nodes.
 -- Make MAINT and OVERLAP resvervation flags order agnostic on overlap test.
 -- Preserve node features when slurmctld daemons reconfigured including active
    and available KNL features.
 -- Prevent creation of multiple io_timeout threads within srun, which can
    lead to fatal() messages when those unexpected and additional mutexes are
    destroyed when srun shuts down.
 -- burst_buffer/cray - Prevent use of "#DW create_persistent" and
    "#DW destroy_persistent" directives available in Cray CLE6.0UP06. This
    will be supported in Slurm version 18.08. Use "#BB" directives until then.
 -- Fix task/cgroup affinity to behave correctly.
 -- FreeBSD - fix build on systems built with WITHOUT_KERBEROS.
 -- Fix to restore pn_min_memory calculated result to correctly enforce
    MaxMemPerCPU setting on a partition when the job uses --mem.
 -- slurmdbd - prevent infinite loop if a QOS is set to preempt itself.
 -- Fix issue with log rotation for slurmstepd processes.

* Changes in Slurm 17.11.3-2
==========================
 -- Revert node_features changes in 17.11.3 that lead to various segfaults on
    slurmctld startup.

* Changes in Slurm 17.11.3
==========================
 -- Send SIG_UME correctly to a step.
 -- Sort sreport's reservation report by cluster, time_start, resv_name instead
    of cluster, resv_name, time_start.
 -- Avoid setting node in COMPLETING state indefinitely if the job initiating
    the node reboot is cancelled while the reboot in in progress.
 -- Scheduling fix for changing node features without any NodeFeatures plugins.
 -- Improve logic when summarizing job arrays mail notifications.
 -- Add scontrol -F/--future option to display nodes in FUTURE state.
 -- Fix REASONABLE_BUF_SIZE to actually be 3/4 of MAX_BUF_SIZE.
 -- When a job array is preempting make it so tasks in the array don't wait
    to preempt other possible jobs.
 -- Change free_buffer to FREE_NULL_BUFFER to prevent possible double free
    in slurmstepd.
 -- node_feature/knl_cray - Fix memory leaks that occur when slurmctld
    reconfigured.
 -- node_feature/knl_cray - Fix memory leak that can occur during normal
    operation.
 -- Fix srun environment variables for --prolog script.
 -- Fix job array dependency with "aftercorr" option and some task arrays in
    the first job fail. This fix lets all task array elements that can run
    proceed rather than stopping all subsequent task array elements.
 -- Fix potential deadlock in the slurmctld when using list_for_each.
 -- Fix for possible memory corruption in srun when running heterogeneous job
    steps.
 -- Fix job array dependency with "aftercorr" option and some task arrays in
    the first job fail. This fix lets all task array elements that can run
    proceed rather than stopping all subsequent task array elements.
 -- Fix output file containing "%t" (task ID) for heterogeneous job step to
    be based upon global task ID rather than task ID for that component of the
    heterogeneous job step.
 -- MYSQL - Fix potential abort when attempting to make an account a parent of
    itself.
 -- Fix potentially uninitialized variable in slurmctld.
 -- MYSQL - Fix issue for multi-dimensional machines when using sacct to
    find jobs that ran on specific nodes.
 -- Reject --acctg-freq at submit if invalid.
 -- Added info string on sh5util when deleting an empty file.
 -- Correct dragonfly topology support when job allocation specifies desired
    switch count.
 -- Fix minor memory leak on an sbcast error path.
 -- Fix issues when starting the backup slurmdbd.
 -- Revert uid check when requesting a jobid from a pid.
 -- task/cgroup - add support to detect OOM_KILL cgroup events.
 -- Fix whole node allocation cpu counts when --hint=nomultihtread.
 -- Allow execution of task prolog/epilog when uid has access
    rights by a secondary group id.
 -- Validate command existence on the srun *[pro|epi]log options
    if LaunchParameter test_exec is set.
 -- Fix potential memory leak if clean starting and the TRES didn't change
    from when last started.
 -- Fix for association MaxWall enforcement when none is given at submission.
 -- Add a job's allocated licenses to the [Pro|Epi]logSlurmctld.
 -- burst_buffer/cray: Attempts by job to create persistent burst buffer when
    one already exists owned by a different user will be logged and the job
    held.
 -- CRAY - Remove race in the core_spec where we add the slurmstepd to the
    job container where if the step was canceled would also cancel the stepd
    erroneously.
 -- Make sure the slurmstepd blocks signals like SIGTERM correctly.
 -- SPANK - When slurm_spank_init_post_opt() fails return error correctly.
 -- When revoking a sibling job in the federation we want to send a start
    message before purging the job record to get the uid of the revoked job.
 -- Make JobAcctGatherParams options case-insensitive. Previously, UsePss
    was the only correct capitialization; UsePSS or usepss were silently
    ignored.
 -- Prevent pthread_atfork handlers from being added unnecessarily after
    'scontrol reconfigure', which can eventually lead to a crash if too
    many handlers have been registered.
 -- Better debug messages when MaxSubmitJobs is hit.
 -- Docs - update squeue man page to describe all possible job states.
 -- Prevent orphaned step_extern steps when a job is cancelled while the
    prolog is still running.

* Changes in Slurm 17.11.2
==========================
 -- jobcomp/elasticsearch - append Content-Type to the HTTP header.
 -- MYSQL - Fix potential abort of slurmdbd when job has no TRES.
 -- Add advanced reservation flag of "REPLACE_DOWN" to replace DOWN or DRAINED
    nodes.
 -- slurm.spec-legacy - add missing libslurmfull.so to slurm.files.
 -- Fix squeue job ID filtering for pending job array records.
 -- Fix potential deadlock in _run_prog() in power save code.
 -- MYSQL - Add dynamic_offset in the database to force range for auto
    increment ids for the tres_table.
 -- MYSQL - Fix fallout from MySQL auto increment bug, see RELEASE_NOTES,
    only affects current 17.11 users tracking licenses or GRES in the database.
 -- Refactor logging logic to avoid possible memory corruption on non-x86
    architectures.
 -- Fix memory leak when getting jobs from the slurmdbd.
 -- Fix incorrect logic behind MemorySwappiness, and only set the value when
    specified in the configuration.

* Changes in Slurm 17.11.1-2
============================
 -- MYSQL - Make index for pack_job_id

* Changes in Slurm 17.11.1
==========================
 -- Fix --with-shared-libslurm option to work correctly.
 -- Make it so only daemons log errors on configuration option duplicates.
 -- Fix for ConstrainDevices=yes to work correctly.
 -- Fix to purge old jobs using burst buffer if slurmctld daemon restarted
    after the job's burst buffer work was already completed.
 -- Make logging prefix for slurmstepd to happen as soon as possible.
 -- mpi/pmix: Fix the job registration for the PMIx v2.1.
 -- Fix uid check for signaling a step with anything but SIGKILL.
 -- Return ESLURM_TRANSITION_STATE_NO_UPDATE instead of EAGAIN when trying to
    signal a step that is still running a prolog.
 -- Update Cray slurm_playbook.yaml with latest recommended version.
 -- Only say a prolog is done running after the extern step is launched.
 -- Wait to start a batch step until the prolog and extern step are
    fully ran/launched.  Only matters if running with
    PrologFlags=[contain|alloc].
 -- Truncate a range for SlurmctldPort to FD_SETSIZE elements and throw an
    error, otherwise network traffic may be lost due to poll() not detecting
    traffic.
 -- Fix for srun --pack-group option that can reuse/corrupt memory.
 -- Fix handling ultra long hostlists in a hostfile.
 -- X11: fix xauth regex to handle '-' in hostnames again.
 -- Fix potential node reboot timeout problem for "scontrol reboot" command.
 -- Add ability for squeue to sort jobs by submit time.
 -- CRAY - Switch to standard pid files on Cray systems.
 -- Update jobcomp records on duplicate inserts.
 -- If unrecognized configuration file option found then print an appropriate
    fatal error message rather than relying upon random errno value.
 -- Initialize job_desc_msg_t's instead of just memset'ing them.
 -- Fix divide by zero when job requests no tasks and more memory than
    MaxMemPer{CPU|NODE}.
 -- Avoid changing Slurm internal errno on syslog() failures.
 -- BB - Only launch dependent jobs after the burst buffer is staged-out
    completely instead of right after the parent job finishes.
 -- node_features/knl_generic - If plugin can not fully load then do not spawn
    a background pthread (which will fail with invalid memory reference).
 -- Don't set the next jobid to give out to the highest jobid in the system on
    controller startup. Just use the checkpointed next use jobid.
 -- Docs - add Slurm/PMIx and OpenMPI build notes to the mpi_guide page.
 -- Add lustre_no_flush option to LaunchParameters for Native Cray systems.
 -- Fix rpmbuild issue with rpm 4.13+ / Fedora 25+.
 -- sacct - fix the display for the NNodes field when using the --units option.
 -- Prevent possible double-xfree on a buffer in stepd_completion.
 -- Fix for record job state on successful allocation but failed reply message.
 -- Fill in the user_name field for batch jobs if not sent by the slurmctld.
    (Which is the default behavior if LaunchParameters=send_gids is not
    enabled.). This prevents job launch problems for sites using UsePAM=1.
 -- Handle syncing federated jobs that ran on non-origin clusters and were
    cancelled while the origin cluster was down.
 -- Fix accessing variable outside of lock.
 -- slurm.spec: move libpmi to a separate package to solve a conflict with the
    version provided by PMIx. This will require a separate change to PMIx as
    well.
 -- X11 forwarding: change xauth handling to use hostname/unix:display format,
    rather than localhost:display.
 -- mpi/pmix - Fix warning if not compiling with debug.

* Changes in Slurm 17.11.0
==========================
 -- Fix documentation for MaxQueryTimeRange option in slurmdbd.conf.
 -- Avoid srun abort trying to run on heterogeneous job component that has
    ended.
 -- Add SLURM_PACK_JOB_ID,SLURM_PACK_JOB_OFFSET to PrologSlurmctld and
    EpilogSlurmctld environment.
 -- Treat ":" in #SBATCH arguments as fatal error. The "#SBATCH packjob" syntax
    must be used instead.
 -- job_submit/lua plugin: expose pack_job fields to get.
 -- Prevent scheduling deadlock with multiple components of heterogeneous job
    in different partitions (i.e. one heterogeneous job component is higher
    priority in one partition and another component is lower priority in a
    different partition).
 -- Fix for heterogeneous job starvation bug.
 -- Fix some slurmctld memory leaks.
 -- Add SLURM_PACK_JOB_NODELIST to PrologSlurmctld and EpilogSlurmctld
    environment.
 -- If PrologSlurmctld fails for pack job leader then requeue or kill all
    components of the job.
 -- Fix for mulitple --pack-group srun arguments given out of order.
 -- Update slurm.conf(5) man page with updated example logrotate script.
 -- Add SchedulerParameters=whole_pack configuration parameter. If set, then
    hold, release and cancel operations on any component of a heterogeneous job
    will be applied to all components
 -- Handle FQDNs in xauth cookies for x11 display forwarding properly.
 -- For heterogeneous job steps, the srun --open-mode option default value will
    be set to "append".
 -- Pack job scheduling list not being cleared between runs of the backfill
    scheduler resulted in various anomalies.
 -- Fix that backward compat for pmix version < 1.1.5.
 -- Fix use-after-free that can lead to slurmstepd segfaulting when setting
    ulimit values.
 -- Add heterogeneous job start data to sdiag output.
 -- X11 forwarding - handle systems with X11UseLocalhost=no set in sshd_config.
 -- Fix potential missing issue with missin symbols in gres plugins.
 -- Ignore querying clusters in federation that are down from status commands.
 -- Base federated jobs off of origin job and not the local cluster in API.
 -- Remove erroneous double '-' on rpath for libslurmfull.
 -- Remove version from libslurmfull and move it to $LIBDIR/slurm since the ABI
    could change from one version to the other.
 -- Fix unused wall time for reservations.
 -- Convert old reservation records to insert unused wall into the rows.
 -- slurm.spec: further restructing and improvements.
 -- Allow nodes state to be updated between FAIL and DRAIN.
 -- x11 forwarding: handle build with alternate location for libssh2.

* Changes in Slurm 17.11.0rc3
==============================
 -- Fix extern step to wait until launched before allowing job to start.
 -- Add missing locks around figuring out TRES when clean starting the
    slurmctld.
 -- Cray modulefile: avoid removing /usr/bin from path on module unload.
 -- Make reoccurring reservations show up in the database.
 -- Adjust related resources (cpus, tasks, gres, mem, etc.) when updating
    NumNodes with scontrol.
 -- Don't initialize MPI plugins for batch or extern steps.`
 -- slurm.spec - do not install a slurm.conf file under /etc/ld.so.conf.d.
 -- X11 forwarding - fix keepalive message generation code.
 -- If heterogeneous job step is unable to acquire MPI reserved ports then
    avoid referencing NULL pointer. Retry assigning ports ONLY for
    non-heterogeneous job steps.
 -- If any acct_gather_*_init fails fatal instead of error and keep going.
 -- launch/slurm plugin - Avoid using global variable for heterogeneous job
    steps, which could corrupt memory.

* Changes in Slurm 17.11.0rc2
==============================
 -- Prevent slurmctld abort with NodeFeatures=knl_cray and non-KNL nodes lacking
    any configured features.
 -- The --cpu_bind and --mem_bind options have been renamed to --cpu-bind
    and --mem-bind for consistency with the rest of Slurm's options. Both
    old and new syntaxes are supported for now.
 -- Add slurmdb_connection_commit to the slurmdb api to commit when needed.
 -- Add the federation api's to the slurmdb.h file.
 -- Add job functions to the db_api.
 -- Fix sacct to always use the db_api instead of sometimes calling functions
    directly.
 -- Fix sacctmgr to always use the db_api instead of sometimes calling functions
    directly.
 -- Fix sreport to always use the db_api instead of sometimes calling functions
    directly.
 -- Make global uid to the db_api to minimize calls to getuid().
 -- Add support for HWLOC version 2.0.
 -- Added more validation logic for updates to node features.
 -- Added node_features_p_node_update_valid() function to node_features plugin.
 -- If a job is held due to bad constraints and a node's features change then
    test the job again to see if can run with the new features.
 -- Added node_features_p_changible_feature() function to node_features plugin.
 -- Avoid rebooting a node if a job's requested feature is not under the control
    of the node_features plugin and is not currently active.
 -- node_features/knl_generic plugin: Do not clear a node's non-KNL features
    specified in slurm.conf.
 -- Added SchedulerParameters configuration option "disable_hetero_steps" to
    disable job steps that span multiple components of a heterogeneous job.
    Disabled by default except with mpi/none plugin. This limitation to be
    removed in Slurm version 18.08.

* Changes in Slurm 17.11.0rc1
==============================
 -- Added the following jobcomp/script environment variables: CLUSTER,
    DEPENDENCY, DERIVED_EC, EXITCODE, GROUPNAME, QOS, RESERVATION, USERNAME.
    The format of LIMIT (job time limit) has been modified to D-HH:MM:SS.
 -- Fix QOS usage factor applying to individual TRES run minute usage.
 -- Print numbers using exponential format if required to fit in allocated
    field width. The sacctmgr and sshare commands are impacted.
 -- Make it so a backup DBD doesn't attempt to create database tables and
    relies on the primary to do so.
 -- By default have Slurm dynamically link to libslurm.so instead of static
    linking.  If static linking is desired configure with
    --without-shared-libslurm.
 -- Change --workdir in sbatch to be --chdir as in all other commands (salloc,
    srun).
 -- Add WorkDir to the job record in the database.
 -- Make the UsageFactor of a QOS work when a qos has the nodecay flag.
 -- Add MaxQueryTimeRange option to slurmdbd.conf to limit accounting query
    ranges when fetching job records.
 -- Add LaunchParameters=batch_step_set_cpu_freq to allow the setting of the cpu
    frequency on the batch step.
 -- CRAY - Fix statically linked applications to CRAY's PMI.
 -- Fix - Raise an error back to the user when trying to update currently
    unsupported core-based reservations.
 -- Do not print TmpDisk space as part of 'slurmd -C' line.
 -- Fix to test MaxMemPerCPU/Node partition limits when scheduling, previously
    only checked on submit.
 -- Work for heterogeneous job support (complete solution in v17.11):
    * Set SLURM_PROCID environment variable to reflect global task rank (needed
      by MPI).
    * Set SLURM_NTASKS environment variable to reflect global task count (needed
      by MPI).
    * In srun, if only some steps are allocated and one step allocation fails,
      then delete all allocated steps.
    * Get SPANK plungins working with heterogeneous jobs. The
      spank_init_post_opt() function is executed once per job component.
    * Modify sbcast command and srun's --bcast option to support heterogeneous
      jobs.
    * Set more environment variables for MPI: SLURM_GTIDS and SLURM_NODEID.
    * Prevent a heterogeneous job allocation from including the same nodes in
      multiple components (required by MPI jobs spanning components).
    * Modify step create logic so that call components of a heterogeneous job
      launched by a single srun command have the same step ID value.
 -- Modify output of "--mpi=list" to avoid duplicates for version numbers in
    mpi/pmix plugin names.
 -- Allow nodes to be rebooted while in a maintenance reservation.
 -- Show nodes as down even when nodes are in a maintenance reservation.
 -- Harden the slurmctld HA stack to mitigate certain split-brain issues.
 -- Work for heterogeneous job support (complete solution in v17.11):
    * Add burst buffer support.
    * Remove srun's --mpi-combine option (always combined).
    * Add SchedulerParameters configuration option "enable_hetero_steps" to
      enable job steps that span multiple components of a heterogeneous job.
      Disabled by default as most MPI implementations and Slurm configurations
      are not currently supported. Limitation to be removed in Slurm version
      18.08.
    * Synchronize application launch across multiple components with debugger.
    * Modify slurm_kill_job_step() to cancel all components of a heterogeneous
      job step (used by MPI).
    * Set SLURM_JOB_NUM_NODES environment variable as needed by MVAPICH.
    * Base time limit upon the time that the latest job component is available
      (after all nodes in all components booted and ready for use).
 -- Add cluster name to smail tool email header.
 -- Speedup arbitrary distribution algorithm.
 -- Modify "srun --mpi=list" output to match valid option input by removing the
    "mpi/" prefix on each line of output.
 -- Automatically set the reservation's partition for the job if not the
    cluster default.
 -- mpi/pmi2 plugin - vestigial pointer could be referenced at shutdown with
    invalid memory reference resulting.
 -- Fix to _is_gres_cnt_zero() return false for improper input string
 -- Cleanup all pthread_create calls and replace with new slurm_thread_create
    macro.
 -- Removed obsolete MPI plugins. Remaining options are openmpi, pmi2, pmix.
 -- Removed obsolete checkpoint/poe plugin.
 -- Process spank environment variable options before processing spank command
    line options. Spank plugins should be able to handle option callbacks being
    called multiple times.
 -- Add support for specialized cores with task/affinity plugin (previously
    only supported with task/cgroup plugin).
 -- Add "TaskPluginParam=SlurmdOffSpec" option that will prevent the Slurm
    compute node daemons (slurmd and slurmstepd) from executing on specialized
    cores.
 -- CRAY - Make native mode default, use --disable-native-cray to use ALPS
    instead of native Slurm.
 -- Add ability to prevent suspension of some count of nodes in a specified
    range using the SuspendExcNodes configuration parameter.
 -- Add SLURM_WCKEY to PrologSlurmctld and EpilogSlurmctld  environment.
 -- Return user response string in response to successful job allocation request
    not only on failure. Set in LUA using function 'slurm.user_msg("STRING")'.
 -- Add 'scontrol write batch_script <jobid>' command to retrieve the batch
    script for a given job.
 -- Remove option to display the batch script as part of 'scontrol show job'.
 -- On native Cray system the configured RebootProgram is executed on on the
    head node by the slurmctld daemon rather than by the slurmd daemons on the
    compute nodes. The "capmc_resume" program from "contribs/cray" can be used.
 -- Modify "scontrol top" command to accept a comma separated list of job IDs
    as an argument rather than a single job ID.
 -- Add MemorySwappiness value to cgroup.conf.
 -- Add new "billing" TRES which allows jobs to be limited based on the job's
    billable TRES calculated by the job's partition's TRESBillingWeights.
 -- sbatch - force line-buffered output so 'sbatch -W' returns the jobid
    over a piped output immediately.
 -- Regular user use of "scontrol top" command is now diabled. Use the
    configuration parameter "SchedulerParameters=enable_user_top" to enable
    that functionality. The configuration parameter
    "SchedulerParameters=disable_user_top" will be silently ignored.
 -- Add -TALL to sreport.
 -- Removed unused SlurmdPlugstack option and associated framework.
 -- Correct logic for line continuation in srun --multi-prog file.
 -- Add DBD Agent queue size to sdiag output.
 -- Add running job count to sdiag output.
 -- Print unix timestamps next to ASCII timestamps in sdiag output.
 -- In a job allocation spanning KNL and non-KNL nodes and requiring a reboot,
    do not attempt to set default NUMA or MCDRAM modes on non-KNL nodes.
 -- Change default to let pending jobs run outside of reservation after
    reservation is gone to put jobs in held state. Added NO_HOLD_JOBS_AFTER_END
    reservation flag to use old default.
 -- When creating a reservation, validate the CoreCnt specification matches
    the number of nodes listed.
 -- When creating a reservation, correct logic to ignoring job allocations on
    request.
 -- Deprecate BLCR plugin, and do not build by default.
 -- Change sreport report titles from "Use" to "Usage"

* Changes in Slurm 17.11.0pre2
==============================
 -- Initial work for heterogeneous job support (complete solution in v17.11):
    * Modified salloc, sbatch and srun commands to parse command line, job
      script and environment variables to recognize requests for heterogeneous
      jobs. Same commands also modified to set environment variables describing
      each component of the heterogeneous job.
    * Modified job allocate, batch job submit and job "will-run" requests to
      pass a list of job specifications and get a list of responses.
    * Modify slurmctld daemon to process a heterogeneous job request and create
      multiple job records as needed.
    * Added new fields to job record: pack_job_id, pack_job_offset and
      pack_job_set (set of job IDs). Added to slurmctld state save/restore
      logic and job information reported.
    * Display new job fields in "scontrol show job" output.
    * Modify squeue command to display heterogeneous job records using "#+#"
      format. The squeue --job=# output lists all components of a heterogeneous
      job.
    * Modify scancel logic to cancel all components of a heterogeneous job with
      a single request/RPC.
    * Configuration parameter DebugFlags value of "HeteroJobs" added.
    * Job requeue and suspend/resume modified to operate on all components of
      a heterogeneous job with a single request/RPC.
    * New web page added to describe heterogeneous jobs.
    * Descriptions of new API added to man pages.
    * Modified email notifications to only operate on the first job component.
    * Purge heterogeneous job records at the same time and not by individual
      components.
    * Modified logic for heterogeneous jobs submitted to multiple clusters
      ("--clusters=...") so the job will be routed to the cluster that is
      expected to start all components earliest.
    * Modified srun to create multiple job steps for heterogeneous job
      allocations.
    * Modified launch plugin to accept a pointer to job step options structure
      rather than work from a single/common data structure.
 -- Improve backfill scheduling algorithm with respect to starting jobs as soon
    as possible while avoiding advanced reservations.
 -- Add URG as an option to 'scancel --signal'.
 -- Check if the buffer returned from slurm_persist_msg_pack() isn't NULL.
 -- Modify all daemons to re-open log files on receipt of SIGUSR2 signal. This
    is much than using SIGHUP to re-read the configuration file and rebuild
    various tables.
 -- Add PrivateData=events configuration parameter
 -- Work for heterogeneous job support (complete solution in v17.11):
    * Add pointer to job option structure to job_step_create_allocation()
      function used by srun.
    * Parallelize task launch for heterogeneous job allocations (initial work).
    * Make packjobid, packjoboffset, and packjobidset fields available in squeue
      output.
    * Modify smap command to display heterogeneous job records using "#+#"
      format.
    * Add srun --pack-group and --mpi-combine options to control job step
      launch behaviour (not fully implemented).
    * Add pack job component ID to srun --label output (e.g. "P0 1:" for
      job component 0 and task 1).
    * jobcomp/elasticsearch: Add pack_job_id and pack_job_offset fields.
    * sview: Modified to display pack job information.
    * Major re-write of task state container logic to support for list of
      containers rather than one container per srun command.
    * Add some regression tests.
    * Add srun pack job environment variables when performing job allocation.
 -- Set Reason=dependency over Reason=JobArrayTaskLimit for pending jobs.
 -- Add slurm.conf configuration parameters SlurmctldSyslogDebug and
    SlurmdSyslogDebug to control which messages from the slurmctld and slurmd
    daemons get written to syslog.
 -- Add slurmdbd.conf configuration parameter DebugLevelSyslog to control which
    messages from the slurmdbd daemon get written to syslog.
 -- Fix handling of GroupUpdateForce option.
 -- Work for heterogeneous job support (complete solution in v17.11):
    * Add support to sched/backfill for concurrent allocation of all pack job
      components including support of --time-min option.
    * Defer initiation of a heterogeneous job until a components can be started
      at the same time, taking into consideration association and QOS limits
      for the job as a whole.
    * Perform limit check on heterogeneous job as a whole at submit time to
      reject jobs that will never be able to run.
    * Add pack_job_id and pack_job_offset to accounting database.
    * Modified sacct to accept pack job ID specification using "#+#" notation.
    * Modified sstat to accept pack job ID specification using "#+#" notation.
 -- Clear a job's "wait reason" value of BeginTime" after that time has passed.
    Previously a readon of "BeginTime" could be reported long after the job's
    requested begin time had passed.
 -- Split group_info in slurm_ctl_conf_t into group_force and group_time.
 -- Work for heterogeneous job support (complete solution in v17.11):
    * Fix I/O race condition on step termination for srun launching multiple
      pack job groups.
    * If prolog is running when attempting to signal a step, then return EAGAIN
      and retry rather than simply returning SLURM_ERROR and aborting.
    * Modify launch/slurm plugin to signal all components of a pack job rather
      than just the one (modify to use a list of step context records).
    * Add logic to support srun --mpi-combine option.
    * Set up debugger data structures.
    * Disable cancellation of individual component while the job is pending.
    * Modify scontrol job hold/release and update to operate with heterogeneous
      job id specification (e.g. "scontrol hold 123+4").
    * If srun lacks application specification for some component, the next one
      specified will be used for earlier components.

* Changes in Slurm 17.11.0pre1
==============================
 -- Interpet all format options in output/error file to log prolog errors. Prior
    logic only supported "%j" (job ID) option.
 -- Add the configure option --with-shared-libslurm which will link to
    libslurm.so instead of libslurm.o thus reducing the footprint of all the
    binaries.
 -- In switch plugin, added plugin_id symbol to plugins and wrapped
    switch_jobinfo_t with dynamic_plugin_data_t in interface calls in
    order to pass switch information between clusters with different switch
    types.
 -- Switch naming of acct_gather_infiniband to acct_gather_interconnect
 -- Make it so you can "stack" the interconnect plugins.
 -- Add a last_sched_eval timestamp to record when a job was last evaluated
    by the main scheduler or backfill.
 -- Add scancel "--hurry" option to avoid staging out any burst buffer data.
 -- Simplify the sched plugin interface.
 -- Add new advanced reservation flags of "weekday" (repeat on each weekday;
    Monday through Friday) and "weekend" (repeat on each weekend day; Saturday
    and Sunday).
 -- Add new advanced reservation flag of "flex", which permits jobs requesting
    the reservation to begin prior to the reservation's start time and use
    resources inside or outside of the reservation. A typical use case is to
    prevent jobs not explicitly requesting the reservation from using those
    reserved resources rather than forcing jobs requesting the reservation to
    use those resources in the time frame reserved.
 -- Add NoDecay flag to QOS.
 -- Node "OS" field expanded from "sysname" to "sysname release version" (e.g.
    change from "Linux" to
    "Linux 4.8.0-28-generic #28-Ubuntu SMP Sat Feb 8 09:15:00 UTC 2017").
 -- jobcomp/elasticsearch - Add "job_name" and "wc_key" fields to stored
    information.
 -- jobcomp/filetxt - Add ArrayJobId, ArrayTaskId, ReservationName, Gres,
    Account, QOS, WcKey, Cluster, SubmitTime, EligibleTime, DerivedExitCode and
    ExitCode.
 -- scontrol modified to report core IDs for reservation containing individual
    cores.
 -- MYSQL - Get rid of table join during rollup which speeds up the process
    dramatically on large job/step tables.
 -- Add ability to define features on clusters for directing federated jobs to
    different clusters.
 -- Add new RPC to process multiple federation RPCs in a single communication.
 -- Modify slurm_load_jobs() function to load job information from all clusters
    in a federation.
 -- Add squeue --local and --sibling options to modify filtering of jobs on
    federated clusters.
 -- Add SchedulerParameters option of bf_max_job_user_part to specifiy the
    maximum number of jobs per user for any single partition. This differs from
    bf_max_job_user in that a separate counter is applied to each partition
    rather than having a single counter per user applied to all partitions.
 -- Modify backfill logic so that bf_max_job_user, bf_max_job_part and
    bf_max_job_user_part options can all be used independently of each other.
 -- Add sprio -p/--partition option to filter jobs by partition name.
 -- Add partition name to job priority factor response message.
 -- Add sprio --local and --sibling options for use in federation of clusters.
 -- Add sprio "%c" format to print cluster name in federation mode.
 -- Modify sinfo logic to provided unified view of all nodes and partitions
    in a federation, add --local option to only report local state information
    even in a cluster, print cluster name with "%V" format option, and
    optionally sort by cluster name.
 -- If a task in a parallel job fails and it was launched with the
    --kill-on-bad-exit option then terminate the remaining tasks using the
    SIGCONT, SIGTERM and SIGKILL signals rather than just sending SIGKILL.
 -- Include submit_time when doing the sort for job scheduling.
 -- Modify sacct to report all jobs in federation by default. Also add --local
    option.
 -- Modify sacct to accept "--cluster all" option (in addition to the old
    "--cluster -1", which is still accepted).
 -- Modify sreport to report all jobs in federation by default. Also add --local
    option.
 -- sched/backfill: Improve assoc_limit_stop configuration parameter support.
 -- KNL features: Always keep active and available features in the same order:
    first site-specific features, next MCDRAM modes, last NUMA modes.
 -- Changed default ProctrackType to cgroup.
 -- Add "cluster_name" field to node_info_t and partition_info_t data structure.
    It is filled in only when the cluster is part of a federation and
    SHOW_FEDERATION flag used.
 -- Functions slurm_load_node() slurm_load_partitions() modified to show all
    nodes/partitions in a federation when the SHOW_FEDERATION flag is used.
 -- Add federated views to sview.
 -- Add --federation option to sacct, scontrol, sinfo, sprio, squeue, sreport to
    show a federated view. Will show local view by default.
 -- Add FederationParameters=fed_display slurm.conf option to configure status
    commands to display a federated view by default if the cluster is a member
    of a federation.
 -- Log the down nodes whenever slurmctld restarts.
 -- Report that "CPUs" plus "Boards" in node configuration invalid only if the
    CPUs value is not equal to the total thread count.
 -- Extend the output of the seff utility to also include the job's wall-clock
    time.
 -- Add bf_max_time to SchedulerParameters.
 -- Add bf_max_job_assoc to SchedulerParameters.
 -- Add new SchedulerParameters option bf_window_linear to control the rate at
    which the backfill test window expands. This can be used on a system with
    a modest number of running jobs (hundreds of jobs) to help prevent expected
    start times of pending jobs to get pushed forward in time. On systems with
    large numbers of running jobs, performance of the backfill scheduler will
    suffer and fewer jobs will be evaluated.
 -- Improve scheduling logic with respect to license use and node reboots.
 -- CRAY - Alter algorithm to come up with the SLURM_ID_HASH.
 -- Implement federated scheduling and federated status outputs.
 -- The '-q' option to srun has changed from being the short form of
    '--quit-on-interrupt' to '--qos'.
 -- Change sched_min_interval default from 0 to 2 microseconds.

* Changes in Slurm 17.02.12
==========================
 -- Fix segfault in slurmdbd hourly rollup when having a job outside a
    reservation, with no end_time set, from an assoc that's in a reservation.

* Changes in Slurm 17.02.11
==========================
 -- Fix insecure handling of user_name and gid fields. CVE-2018-10995.

* Changes in Slurm 17.02.10
==========================
 -- Fix updating of requested TRES memory.
 -- Cray modulefile: avoid removing /usr/bin from path on module unload.
 -- Fix issue when resetting the partition pointers on nodes.
 -- Show reason field in 'sinfo -R' when nodes is marked as failed.
 -- Fix potential of slurmstepd segfaulting when the extern step fails to start.
 -- Allow nodes state to be updated between FAIL and DRAIN.
 -- Avoid registering a job'd credential multiple times.
 -- Fix sbatch --wait to stop waiting after job is gone from memory.
 -- Fix memory leak of MailDomain configuration string when slurmctld daemon is
    reconfigured.
 -- Fix to properly remove extern steps from the starting_steps list.
 -- Fix Slurm to work correctly with HDF5 1.10+.
 -- Add support in salloc/srun --bb option for "access_mode" in addition to
    "access" for consistency with DW options.
 -- Fix potential deadlock in _run_prog() in power save code.
 -- MYSQL - Add dynamic_offset in the database to force range for auto
    increment ids for the tres_table.
 -- Avoid setting node in COMPLETING state indefinitely if the job initiating
    the node reboot is cancelled while the reboot in in progress.
 -- node_feature/knl_cray - Fix memory leaks that occur when slurmctld
    reconfigured.
 -- node_feature/knl_cray - Fix memory leak that can occur during normal
    operation.
 -- Fix job array dependency with "aftercorr" option and some task arrays in
    the first job fail. This fix lets all task array elements that can run
    proceed rather than stopping all subsequent task array elements.
 -- Fix whole node allocation cpu counts when --hint=nomultihtread.
 -- NRT - Fix issue when running on a HFI (p775) system with multiple protocols.
 -- Fix uninitialized variables when unpacking slurmdb_archive_cond_t.
 -- Fix security issue in accounting_storage/mysql plugin by always escaping
    strings within the slurmdbd. CVE-2018-7033.

* Changes in Slurm 17.02.9
==========================
 -- When resuming powered down nodes, mark DOWN nodes right after ResumeTimeout
    has been reached (previous logic would wait about one minute longer).
 -- Fix sreport not showing full column name for TRES Count.
 -- Fix slurmdb_reservations_get() giving wrong usage data when job's spanned
    reservation that was modified.
 -- Fix sreport reservation utilization report showing bad data.
 -- Show all TRES' on a reservation in sreport reservation utilization report by
    default.
 -- Fix sacctmgr show reservation handling "end" parameter.
 -- Work around issue with sysmacros.h and gcc7 / glibc 2.25.
 -- Fix layouts code to only allow setting a boolean.
 -- Fix sbatch --wait to keep waiting even if a message timeout occurs.
 -- CRAY - If configured with NodeFeatures=knl_cray and there are non-KNL
    nodes which include no features the slurmctld will abort without
    this patch when attemping strtok_r(NULL).
 -- Fix regression in 17.02.7 which would run the spank_task_privileged as
    part of the slurmstepd instead of it's child process.
 -- Fix security issue in Prolog and Epilog by always prepending SPANK_ to
    all user-set environment variables. CVE-2017-15566.

* Changes in Slurm 17.02.8
==========================
 -- Add 'slurmdbd:' to the accounting plugin to notify message is from dbd
    instead of local.
 -- mpi/mvapich - Buffer being only partially cleared. No failures observed.
 -- Fix for job --switch option on dragonfly network.
 -- In salloc with --uid option, drop supplementary groups before changing UID.
 -- jobcomp/elasticsearch - strip any trailing slashes from JobCompLoc.
 -- jobcomp/elasticsearch - fix memory leak when transferring generated buffer.
 -- Prevent slurmstepd ABRT when parsing gres.conf CPUs.
 -- Fix sbatch --signal to signal all MPI ranks in a step instead of just those
    on node 0.
 -- Check multiple partition limits when scheduling a job that were previously
    only checked on submit.
 -- Cray: Avoid running application/step Node Health Check on the external
    job step.
 -- Optimization enhancements for partition based job preemption.
 -- Address some build warnings from GCC 7.1, and one possible memory leak if
    /proc is inaccessible.
 -- If creating/altering a core based reservation with scontrol/sview on a
    remote cluster correctly determine the select type.
 -- Fix autoconf test for libcurl when clang is used.
 -- Fix default location for cgroup_allowed_devices_file.conf to use correct
    default path.
 -- Document NewName option to sacctmgr.
 -- Reject a second PMI2_Init call within a single step to prevent slurmstepd
    from hanging.
 -- Handle old 32bit values stored in the database for requested memory
    correctly in sacct.
 -- Fix memory leaks in the task/cgroup plugin when constraining devices.
 -- Make extremely verbose info messages debug2 messages in the task/cgroup
    plugin when constraining devices.
 -- Fix issue that would deny the stepd access to /dev/null where GRES has a
    'type' but no file defined.
 -- Fix issue where the slurmstepd would fatal on job launch if you have no
    gres listed in your slurm.conf but some in gres.conf.
 -- Fix validating time spec to correctly validate various time formats.
 -- Make scontrol work correctly with job update timelimit [+|-]=.
 -- Reduce the visibily of a number of warnings in _part_access_check.
 -- Prevent segfault in sacctmgr if no association name is specified for
    an update command.
 -- burst_buffer/cray plugin modified to work with changes in Cray UP05
    software release.
 -- Fix job reasons for jobs that are violating assoc MaxTRESPerNode limits.
 -- Fix segfault when unpacking a 16.05 slurm_cred in a 17.02 daemon.
 -- Fix setting TRES limits with case insensitive TRES names.
 -- Add alias for xstrncmp() -- slurm_xstrncmp().
 -- Fix sorting of case insensitive strings when using xstrcasecmp().
 -- Gracefully handle race condition when reading /proc as process exits.
 -- Avoid error on Cray duplicate setup of core specialization.
 -- Skip over undefined (hidden in Slurm) nodes in pbsnodes.
 -- Add empty hashes in perl api's slurm_load_node() for hidden nodes.
 -- CRAY - Add rpath logic to work for the alpscomm libs.
 -- Fixes for administrator extended TimeLimit (job reason & time limit reset).
 -- Fix gres selection on systems running select/linear.
 -- sview: Added window decorator for maximize,minimize,close buttons for all
    systems.
 -- squeue: interpret negative length format specifiers as a request to
    delimit values with spaces.
 -- Fix the torque pbsnodes wrapper script to parse a gres field with a type
    set correctly.

* Changes in Slurm 17.02.7
==========================
 -- Fix deadlock if requesting to create more than 10000 reservations.
 -- Fix potential memory leak when creating partition name.
 -- Execute the HealthCheckProgram once when the slurmd daemon starts rather
    than executing repeatedly until an exit code of 0 is returned.
 -- Set job/step start and end times to 0 when using --truncate and start > end.
 -- Make srun --pty option ignore EINTR allowing windows to resize.
 -- When resuming node only send one message to the slurmdbd.