Newer
Older
This file describes changes in recent versions of Slurm. It primarily
documents those changes that are of interest to users and administrators.
* Changes in Slurm 15.08.0pre4
==============================
-- Burst_buffer/cray - Convert logic to use new commands/API names (e.g.
"dws_setup" rather than "bbs_setup").
-- Remove the MinJobAge size limitation. It can now exceed 65533 as it
is represented using an unsigned integer.
-- Verify that all plugin version numbers are identical to the component
attempting to load them. Without this verification, the plugin can reference
Slurm functions in the caller which differ (e.g. the underlying function's
arguments could have changed between Slurm versions).
NOTE: All plugins (except SPANK) must be built against the identical
version of Slurm in order to be used by any Slurm command or daemon. This
should eliminate some very difficult to diagnose problems due to use of old
plugins.
-- Increase the MAX_PACK_MEM_LEN define to avoid PMI2 failure when fencing
with large amount of ranks (to 1GB).
-- Requests by normal user to reset a job priority (even to lower it) will
result in an error saying to change the job's nice value instead.
-- SPANK naming changes: For environment variables set using the
spank_job_control_setenv() function, the values were available in the
slurm_spank_job_prolog() and slurm_spank_job_epilog() functions using
getenv where the name was given a prefix of "SPANK_". That prefix has
been removed for consistency with the environment variables available in
the Prolog and Epilog scripts.
-- Add "TopologyParam" configuration parameter. Optional value of "dragonfly"
is supported.
-- Optimize resource allocation for systems with dragonfly networks.
-- Add "--thread-spec" option to salloc, sbatch and srun commands. This is
the count of threads reserved for system use per node.
-- job_submit/lua: Enable reading and writing job environment variables.
For example: if (job_desc.environment.LANGUAGE == "en_US") then ...
-- Added two new APIs slurm_job_cpus_allocated_str_on_node_id()
and slurm_job_cpus_allocated_str_on_node() to print the CPUs id
allocated to a job.
-- Specialized memory (a node's MemSpecLimit configuration parameter) is not
available for allocation to jobs.
-- Modify scontrol update job to allow jobid specification without
the = sign. 'scontrol update job=123 ...' and 'scontrol update job 123 ...'
are both valid syntax.
-- Archive a month at a time when there are lots of records to archive.
-- Introduce new sbatch option '--kill-on-invalid-dep=yes|no' which allows
users to specify which behavior they want if a job dependency is not
satisfied.
-- Add Slurmdb::qos_get() interface to perl api.
* Changes in Slurm 15.08.0pre3
==============================
-- CRAY - addition of acct_gather_energy/cray plugin.
-- Add job credential to "Run Prolog" RPC used with a configuration of
PrologFlags=alloc. This allows the Prolog to be passed identification of
GPUs allocated to the job.
-- Add SLURM_JOB_CONSTAINTS to environment variables available to the Prolog.
-- Added "--mail=stage_out" option to job submission commands to notify user
when burst buffer state out is complete.
-- Require a "Reason" when using scontrol to set a node state to DOWN.
-- Mail notifications on job BEGIN, END and FAIL now apply to a job array as a
whole rather than generating individual email messages for each task in the
job array.
-- task/affinity - Fix memory binding to NUMA with cpusets.
Brian Christiansen
committed
-- Display job's estimated NodeCount based off of partition's configured
resources rather than the whole system's.
-- Add AuthInfo option of "cred_expire=#" to specify the lifetime of a job
step credential. The default value was changed from 1200 to 120 seconds.
-- Set the delay time for job requeue to the job credential lifetime (120
seconds by default). This insures that prolog runs on every node when a
job is requeued. (This change will slow down launch of re-queued jobs).
-- Add AuthInfo option of "cred_expire=#" to specify the lifetime of a job
step credential.
-- Remove srun --max-launch-time option. The option has not been functional
since Slurm version 2.0.
-- Add sockets and cores to TaskPluginParams' autobind option.
-- Added LaunchParameters configuration parameter. Have srun command test
locally for the executable file if LaunchParameters=test_exec or the
environment variable SLURM_TEST_EXEC is set. Without this an invalid
command will generate one error message per task launched.
-- Fix the slurm /etc/init.d script to return 0 upon stopping the
daemons and return 1 in case of failure.
-- Add the ability for a compute node to be allocated to multiple jobs, but
restricted to a single user. Added "--exclusive=user" option to salloc,
sbatch and srun commands. Added "owner" field to node record, visible using
the scontrol and sview commands. Added new partition configuration parameter
"ExclusiveUser=yes|no".
* Changes in Slurm 15.08.0pre2
==============================
-- Add the environment variables SLURM_JOB_ACCOUNT, SLURM_JOB_QOS
and SLURM_JOB_RESERVATION in the batch/srun jobs.
-- Properly enforce partition Shared=YES option. Previously oversubscribing
resources required gang scheduling to be configured.
-- Enable per-partition gang scheduling resource resolution (e.g. the partition
can have SelectTypeParameters=CR_CORE, while the global value is CR_SOCKET).
-- Make it so a newer version of a slurmstepd can talk to an older srun.
Brian Christiansen
committed
allocation. Nodes could have been added while waiting for an allocation.
-- Expanded --cpu-freq parameters to include min-max:governor specifications.
--cpu-freq now supported on salloc and sbatch.
-- Add support for optimized job allocations with respect to SGI Hypercube
topology.
NOTE: Only supported with select/linear plugin.
NOTE: The program contribs/sgi/netloc_to_topology can be used to build
Slurm's topology.conf file.
-- Remove 64k validation of incoming RPC nodelist size. Validated at 64MB
when unpacking.
-- In slurmstepd() add the user primary group if it is not part of the
groups sent from the client.
-- Added BurstBuffer field to advanced reservations.
-- For advanced reservation, replace flag "License_only" with flag "Any_Nodes".
It can be used to indicate the an advanced reservation resources (licenses
and/or burst buffers) can be used with any compute nodes.
-- Allow users to specify the srun --resv-ports as 0 in which case no ports
will be reserved. The default behaviour is to allocate one port per task.
-- Interpret a partition configuration of "Nodes=ALL" in slurm.conf as
including all nodes defined in the cluster.
-- Added new configuration parameters PowerParameters and PowerPlugin.
-- Added power management plugin infrastructure.
-- If job already exceeded one of its QOS/Accounting limits do not
return error if user modifies QOS unrelated job settings.
-- When caching user ids of AllowGroups use both getgrnam_r() and getgrent_r()
then remove eventual duplicate entries.
-- Remove rpm dependency between slurm-pam and slurm-devel.
-- Remove support for the XCPU (cluster management) package.
-- Add Slurmdb::jobs_get() interface to perl api.
-- Performance improvement when sending data from srun to stepds when
processing fencing.
-- Add the feature to specify arbitrary field separator when running
sacct -p or sacct -P. The command line option is --separator.
-- Introduce slurm.conf parameter to use Proportional Set Size (PSS) instead
of RSS to determinate the memory footprint of a job.
Add an slurm.conf option not to kill jobs that is over memory limit.
-- Add job submission command options: --sicp (available for inter-cluster
dependencies) and --power (specify power management options) to salloc,
sbatch, and srun commands.
-- Add DebugFlags option of SICP (inter-cluster option logging).
-- In order to support inter-cluster job dependencies, the MaxJobID
configuration parameter default value has been reduced from 4,294,901,760
to 2,147,418,112 and it's maximum value is now 2,147,463,647.
ANY JOBS WITH A JOB ID ABOVE 2,147,463,647 WILL BE PURGED WHEN SLURM IS
UPGRADED FROM AN OLDER VERSION!
-- Add QOS name to the output of a partition in squeue/scontrol/sview/smap.
* Changes in Slurm 15.08.0pre1
==============================
-- Add sbcast support for file transfer to resources allocated to a job step
rather than a job allocation.
-- Change structures with association in them to assoc to save space.
-- Add support for job dependencies jointed with OR operator (e.g.
"--depend=afterok:123?afternotok:124").
-- Add "--bb" (burst buffer specification) option to salloc, sbatch, and srun.
-- Added configuration parameters BurstBufferParameters and BurstBufferType.
-- Added burst_buffer plugin infrastructure (needs many more functions).
-- Make it so when the fanout logic comes across a node that is down we abandon
the tree to avoid worst case scenarios when the entire branch is down and
we have to try each serially.
-- Add better error reporting of invalid partitions at submission time.
-- Move will-run test for multiple clusters from the sbatch code into the API
so that it can be used with DRMAA.
-- If a non-exclusive allocation requests --hint=nomultithread on a
CR_CORE/SOCKET system lay out tasks correctly.
-- Avoid including unused CPUs in a job's allocation when cores or sockets are
allocated.
-- Added new job state of STOPPED indicating processes have been stopped with a
SIGSTOP (using scancel or sview), but retain its allocated CPUs. Job state
returns to RUNNING when SIGCONT is sent (also using scancel or sview).
-- Added EioTimeout parameter to slurm.conf. It is the number of seconds srun
waits for slurmstepd to close the TCP/IP connection used to relay data
between the user application and srun when the user application terminates.
-- Remove slurmctld/dynalloc plugin as the work was never completed, so it is
not worth the effort of continued support at this time.
-- Remove DynAllocPort configuration parameter.
-- Add advance reservation flag of "replace" that causes allocated resources
to be replaced with idle resources. This maintains a pool of available
resources that maintains a constant size (to the extent possible).
-- Added SchedulerParameters option of "bf_busy_nodes". When selecting
resources for pending jobs to reserve for future execution (i.e. the job
can not be started immediately), then preferentially select nodes that are
in use. This will tend to leave currently idle resources available for
backfilling longer running jobs, but may result in allocations having less
than optimal network topology. This option is currently only supported by
the select/cons_res plugin.
-- Permit "SuspendTime=NONE" as slurm.conf value rather than only a numeric
value to match "scontrol show config" output.
-- Add the 'scontrol show cache' command which displays the associations
in slurmctld.
-- Test more frequently for node boot completion before starting a job.
Provides better responsiveness.
-- Permit PreemptType=qos and PreemptMode=suspend,gang to be used together.
A high-priority QOS job will now oversubscribe resources and gang schedule,
but only if there are insufficient resources for the job to be started
without preemption. NOTE: That with PreemptType=qos, the partition's
Shared=FORCE:# configuration option will permit one job more per resource
to be run than than specified, but only if started by preemption.
-- Remove the CR_ALLOCATE_FULL_SOCKET configuration option. It is now the
default.
-- Fix a race condition in PMI2 when fencing counters can be out of sync.
-- Increase the MAX_PACK_MEM_LEN define to avoid PMI2 failure when fencing
with large amount of ranks.
-- Add QOS option to a partition. This will allow a partition to have
all the limits a QOS has. If a limit is set in both QOS the partition
QOS will override the job's QOS unless the job's QOS has the
PartitionQOS flag set.
-- The task_dist_states variable has been split into "flags" and "base"
components. Added SLURM_DIST_PACK_NODES and SLURM_DIST_NO_PACK_NODES values
to give user greater control over task distribution. The srun --dist options
has been modified to accept a "Pack" and "NoPack" option. These options can
be used to override the CR_PACK_NODE configuration option.
* Changes in Slurm 14.11.6
==========================
-- If SchedulerParameters value of bf_min_age_reserve is configured, then
a newly submitted job can start immediately even if there is a higher
priority non-runnable job which has been waiting for less time than
bf_min_age_reserve.
-- qsub wrapper modified to export "all" with -V option
-- RequeueExit and RequeueExitHold configuration parameters modified to accept
numeric ranges. For example "RequeueExit=1,2,3,4" and "RequeueExit=1-4" are
equivalent.
-- Correct the job array specification parser to accept brackets in job array
expression (e.g. "123_[4,7-9]").
-- Fix for misleading job submit failure errors sent to users. Previous error
could indicate why specific nodes could not be used (e.g. too small memory)
when other nodes could be used, but were not for another reason.
-- Fix squeue --array to display correctly the array elements when the
% separator is specified at the array submission time.
-- Fix priority from not being calculated correctly due to memory issues.
-- Fix a transient pending reason 'JobId=job_id has invalid QOS'.
-- A non-administrator change to job priority will not be persistent except
for holding the job. User's wanting to change a job priority on a persistent
basis should reset it's "nice" value.
-- Print buffer sizes as unsigned values when failed to pack messages.
Brian Christiansen
committed
-- Fix race condition where sprio would print factors without weights applied.
-- Document the sacct option JobIDRaw which for arrays prints the jobid instead
of the arrayTaskId.
-- Allow users to modify MinCPUsNode, MinMemoryNode and MinTmpDiskNode of
their own jobs.
-- Increase the jobid print field in SQUEUE_FORMAT in
opt_modulefiles_slurm.in.
-- Enable compiling without optimizations and with debugging symbols by
default. Disable this by configuring with --disable-debug.
-- job_submit/lua plugin: Add mail_type and mail_user fields.
-- Use standard statvfs(2) syscall if available, in preference to
non-standard statfs.
-- Add a new option -U/--Users to sshare to display only users
information, parent and ancestors are not printed.
-- Purge 50000 records at a time so that locks can released periodically.
-- Fix potentially uninitialized variables
-- ALPS - Fix issue where a frontend node could become unresponsive and never
added back into the system.
-- Gate epilog complete messages as done with other messages
-- If we have more than a certain number of agents (50) wait longer when gating
rpcs.
-- FrontEnd - ping non-responding or down nodes.
-- switch/cray: If CR_PACK_NODES is configured, then set the environment
variable "PMI_CRAY_NO_SMP_ENV=1"
-- Fix invalid memory reference in SlurmDBD when putting a node up.
-- Allow opening of plugstack.conf even when a symlink.
-- Fix scontrol reboot so that rebooted nodes will not be set down with reason
'Node xyz unexpectedly rebooted' but will be correctly put back to service.
-- CRAY - Throttle the post NHC operations as to not hog the job write lock
if many steps/jobs finish at once.
-- Disable changes to GRES count while jobs are running on the node.
-- CRAY - Fix issue with scontrol reconfig.
-- slurmd: Remove wrong reporting of "Error reading step ... memory limit".
The logic was treating success as an error.
-- Eliminate "Node ping apparently hung" error messages.
-- Fix average CPU frequency calculation.
-- When allocating resources with resolution of sockets, charge the job for all
CPUs on allocated sockets rather than just the CPUs on used cores.
-- Prevent slurmdbd error if cluster added or removed while rollup in progress.
Removing a cluster can cause slurmdbd to abort. Adding a cluster can cause
the slurmdbd rollup to hang.
-- sview - When right clicking on a tab make sure we don't display the page
list, but only the column list.
-- FRONTEND - If doing a clean start make sure the nodes are brought up in the
database.
-- MySQL - Fix issue when using the TrackSlurmctldDown and nodes are down at
the same time, don't double bill the down time.
-- MySQL - Various memory leak fixes.
-- Fix node manager logic to keep unexpectedly rebooted node in state
NODE_STATE_DOWN even if already down when rebooted.
* Changes in Slurm 14.11.5
==========================
-- Correct the squeue command taking into account that a node can
have NULL name if it is not in DNS but still in slurm.conf.
-- Fix slurmdbd regression which would cause a segfault when a node is set
down with no reason.
-- BGQ - Fix issue with job arrays not being handled correctly
in the runjob_mux plugin.
-- Print FAIR_TREE, if configured, in "scontrol show config" output for
PriorityFlags.
-- Add SLURM_JOB_GPUS environment variable to those available in the Prolog.
-- Load lua-5.2 library if using lua5.2 for lua job submit plugin.
-- GRES logic: Prevent bad node_offset due to not preserving no_consume flag.
-- Fix wrong variables used in the wrapper functions needed for systems that
don't support strong_alias
-- Fix code for apple computers SOL_TCP is not defined
-- Cray/BASIL - Check for mysql credentials in /root/.my.cnf.
Brian Christiansen
committed
-- Fix sprio showing wrong priority for job arrays until priority is
recalculated.
-- Account to batch step all CPUs that are allocated to a job not
just one since the batch step has access to all CPUs like other steps.
Brian Christiansen
committed
-- Fix job getting EligibleTime set before meeting dependency requirements.
-- Correct the initialization of QOS MinCPUs per job limit.
-- Set the debug level of information messages in cgroup plugin to debug2.
-- For job running under a debugger, if the exec of the task fails, then
cancel its I/O and abort immediately rather than waiting 60 seconds for
I/O timeout.
-- Fix associations not getting default qos set until after a restart.
-- Set the value of total_cpus not to be zero before invoking
acct_policy_job_runnable_post_select.
-- MySQL - When requesting cluster resources, only return resources for the
cluster(s) requested.
-- Add TaskPluginParam=autobind=threads option to set a default binding in the
case that "auto binding" doesn't find a match.
-- Introduce a new SchedulerParameters variable nohold_on_prolog_fail.
If configured don't requeue jobs on hold is a Prolog fails.
-- Make it so sched_params isn't read over and over when an epilog complete
message comes in
-- Fix squeue -L <licenses> not filtering out jobs with licenses.
-- Changed the implementation of xcpuinfo_abs_to_mac() be identical
_abs_to_mac() to fix CPUs allocation using cpuset cgroup.
-- Improve the explanation of the unbuffered feature in the
srun man page.
-- Make taskplugin=cgroup work for core spec. needed to have task/cgroup
before.
-- Fix reports not using the month usage table.
-- BGQ - Sanity check given for translating small blocks into slurm bg_records.
-- Fix bug preventing the requeue/hold or requeue/special_exit of job from the
completing state.
-- Cray - Fix for launching batch step within an existing job allocation.
-- Cray - Add ALPS_APP_ID_ENV environment variable.
-- Increase maximum MaxArraySize configuration parameter value from 1,000,001
to 4,000,001.
-- Added new SchedulerParameters value of bf_min_age_reserve. The backfill
scheduler will not reserve resources for pending jobs until they have
been pending for at least the specified number of seconds. This can be
valuable if jobs lack time limits or all time limits have the same value.
-- Fix support for --mem=0 (all memory of a node) with select/cons_res plugin.
-- Fix bug that can permit someone to kill job array belonging to another user.
-- Don't set the default partition on a license only reservation.
-- Show a NodeCnt=0, instead of NO_VAL, in "scontrol show res" for a license
only reservation.
-- BGQ - When using static small blocks make sure when clearing the job the
block is set up to it's original state.
-- Start job allocation using lowest numbered sockets for block task
distribution for consistency with cyclic distribution.
* Changes in Slurm 14.11.4
==========================
-- Make sure assoc_mgr locks are initialized correctly.
-- Correct check of enforcement when filling in an association.
-- Make sacctmgr print out classification correctly for clusters.
-- Add array_task_str to the perlapi job info.
-- Fix for slurmctld abort with GRES types configured and no CPU binding.
-- Fix for GRES scheduling where count > 1 per topology type (or GRES types).
-- Make CR_ONE_TASK_PER_CORE work correctly with task/affinity.
-- job_submit/pbs - Fix possible deadlock.
-- job_submit/lua - Add "alloc_node" to job information available.
-- Fix memory leak in mysql accounting when usage rollup happens.
-- If users specify ALL together with other variables using the
--export sbatch/srun command line option, propagate the users'
environ to the execution side.
-- Fix job array scheduling anomaly that can stop scheduling of valid tasks.
-- Fix perl api tests for libslurmdb to work correctly.
-- Remove some misleading logs related to non-consumable GRES.
-- Allow --ignore-pbs to take effect when read as an #SBATCH argument.
Brian Christiansen
committed
-- Fix Slurmdb::clusters_get() in perl api from not returning information.
-- Fix TaskPluginParam=Cpusets from logging error message about not being able
to remove cpuset dir which was already removed by the release_agent.
-- Fix the file name substitution for job stderr when %A, %a %j and %u
are specified.
-- Remove minor warning when compiling slurmstepd.
-- Fix database resources so they can add new clusters to them after they have
initially been added.
-- Use the slurm_getpwuid_r wrapper of getpwuid_r to handle possible
interrupts.
-- Correct the scontrol man page and command listing which node states can
be set by the command.
-- Stop sacct from printing non-existent stat information for
Front End systems.
-- Correct srun and acct_gather.conf man pages, mention Filesystem instead
of Lustre.
-- When a job using multiple partition starts send to slurmdbd only
the partition in which the job runs.
-- ALPS - Fix depth for MemoryAllocation in BASIL with CLE 5.2.3.
-- Fix assoc_mgr hash to deal with users that don't have a uid yet when making
reservations.
-- When a job uses multiple partition set the environment variable
SLURM_JOB_PARTITION to be the one in which the job started.
-- Print spurious message about the absence of cgroup.conf at log level debug2
instead of info.
-- Enable CUDA v7.0+ use with a Slurm configuration of TaskPlugin=task/cgroup
ConstrainDevices=yes (in cgroup.conf). With that configuration
CUDA_VISIBLE_DEVICES will start at 0 rather than the device number.
-- Fix job array logic that can cause slurmctld to abort.
-- Report job "shared" field properly in scontrol, squeue, and sview.
-- If a job is requeued because of RequeueExit or RequeueExitHold sent event
REQUEUED to slurmdbd.
-- Fix build if hwloc is in non-standard location.
-- Fix slurmctld job recovery logic which could cause the last task in a job
array to be lost.
-- Fix slurmctld initialization problem which could cause requeue of the last
task in a job array to fail if executed prior to the slurmctld loading
the maximum size of a job array into a variable in the job_mgr.c module.
-- Fix fatal in controller when deleting a user association of a user which
Brian Christiansen
committed
had been previously removed from the system.
-- MySQL - If a node state and reason are the same on a node state change
don't insert a new row in the event table.
Brian Christiansen
committed
-- Fix issue with "sreport cluster AccountUtilizationByUser" when using
PrivateData=users.
-- Fix perlapi tests for libslurm perl module.
-- MySQL - Fix potential issue when PrivateData=Usage and a normal user
runs certain sreport reports.
* Changes in Slurm 14.11.3
==========================
-- Prevent vestigial job record when canceling a pending job array record.
-- Fix job array hash table bug, could result in slurmctld infinite loop or
invalid memory reference.
-- In srun honor ntasks_per_node before looking at cpu count when the user
doesn't request a number of tasks.
-- Fix ghost job when submitting job after all jobids are exhausted.
-- MySQL - Enhanced coordinator security checks.
-- Fix for task/affinity if an admin configures a node for having threads
but then sets CPUs to only represent the number of cores on the node.
-- Make it so previous versions of salloc/srun work with newer versions
of Slurm daemons.
-- Avoid delay on commit for PMI rank 0 to improve performance with some
MPI implementations.
-- auth/munge - Correct logic to read old format AccountingStoragePass.
-- Reset node "RESERVED" state as appropriate when deleting a maintenance
reservation.
-- Prevent a job manually suspended from being resumed by gang scheduler once
free resources are available.
-- Prevent invalid job array task ID value if a task is started using gang
scheduling.
-- Fix documentation bugs in slurm.conf.5. DenyAccount should be DenyAccounts.
-- For backward compatibility with older versions of OMPI not compiled
with --with-pmi restore the SLURM_STEP_RESV_PORTS in the job environment.
-- Update the html documentation describing the integration with openmpi.
-- Fix sacct when searching by nodelist.
-- Fix cosmetic info statements when dealing with a job array task instead of
a normal job.
-- BGQ - Put print statement under a DebugFlag. This was just an oversight.
-- BLUEGENE - Remove check that would erroneously remove the CONFIGURING
flag from a job while the job is waiting for a block to boot.
-- Fix segfault in slurmstepd when job exceeded memory limit.
-- Fix race condition that could start a job that is dependent upon a job array
before all tasks of that job array complete.
* Changes in Slurm 14.11.2
==========================
-- Fix issue with association hash not getting the correct index which
could result in seg fault.
-- Avoid huge malloc if GRES configured with "Type" and huge "Count".
-- Fix jobs from starting in overlapping reservations that won't finish before
a "maint" reservation begins.
-- When node gets drained while in state mixed display its status as draining
in sinfo output.
-- Allow priority/multifactor to work with sched/wiki(2) if all priorities
have no weight. This allows for association and QOS decay limits to work.
-- Fix "squeue --start" to override SQUEUE_FORMAT env variable.
Brian Christiansen
committed
-- Fix scancel to be able to cancel multiple jobs that are space delimited.
-- Log Cray MPI job calling exit() without mpi_fini(), but do not treat it as
a fatal error. This partially reverts logic added in version 14.03.9.
-- sview - Fix displaying of suspended steps elapsed times.
-- Increase number of messages that get cached before throwing them away
when the DBD is down.
-- Fix jobs from starting in overlapping reservations that won't finish before
a "maint" reservation begins.
-- Restore GRES functionality with select/linear plugin. It was broken in
version 14.03.10.
-- Fix bug with GRES having multiple types that can cause slurmctld abort.
Brian Christiansen
committed
-- Fix squeue issue with not recognizing "localhost" in --nodelist option.
-- Make sure the bitstrings for a partitions Allow/DenyQOS are up to date
when running from cache.
-- Add smap support for job arrays and larger job ID values.
-- Fix possible race condition when attempting to use QOS on a system running
accounting_storage/filetxt.
-- Fix issue with accounting_storage/filetxt and job arrays not being printed
correctly.
-- In proctrack/linuxproc and proctrack/pgid, check the result of strtol()
for error condition rather than errno, which might have a vestigial error
code.
-- Improve information recording for jobs deferred due to advanced
reservation.
-- Exports eio_new_initial_obj to the plugins and initialize kvs_seq on
mpi/pmi2 setup to support launching.
* Changes in Slurm 14.11.1
==========================
-- Get libs correct when doing the xtree/xhash make check.
-- Update xhash/tree make check to work correctly with current code.
-- Remove the reference 'experimental' for the jobacct_gather/cgroup
plugin.
-- Add QOS manipulation examples to the qos.html documentation page.
-- If 'squeue -w node_name' specifies an unknown host name print
an error message and return 1.
-- Fix race condition in job_submit plugin logic that could cause slurmctld to
deadlock.
-- Job wait reason of "ReqNodeNotAvail" expanded to identify unavailable nodes
(e.g. "ReqNodeNotAvail(Unavailable:tux[3-6])").
* Changes in Slurm 14.11.0
==========================
-- ALPS - Fix issue with core_spec warning.
-- Allow multiple partitions to be specified in sinfo -p.
-- Install the service files in /usr/lib/systemd/system.
-- MYSQL - Add id_array_job and id_resv keys to $CLUSTER_job_table. THIS
COULD TAKE A WHILE TO CREATE THE KEYS SO BE PATIENT.
-- CRAY - Resize bitmaps on a restart and find we have more blades
than before.
-- Add new eio API function for removing unused connections.
-- ALPS - Fix issue where batch allocations weren't correctly confirmed or
released.
-- Define DEFAULT_MAX_TASKS_PER_NODE based on MAX_TASKS_PER_NODE from
slurm.h as per documentation.
-- Update the FAQ about relocating slurmctld.
-- In the memory cgroup enable memory.use_hierarchy in the cgroup root.
-- Add SLURM_CLUSTER_NAME to job environment.
* Changes in Slurm 14.11.0rc3
=============================
-- Allow envs to override autotools binaries in autogen.sh
-- If the jobs pends with DependencyNeverSatisfied keep it pending even after
the job which it was depending upon was cleaned.
-- Let operators (in addition to user root and SlurmUser) see job script for
other user's jobs.
-- Perl API modified to return node state of MIXED rather than ALLOCATED if
only some CPUs allocated.
-- Double Munge connect retry timeout from 1 to 2 seconds.
-- sview - Remove unneeded code that was resolved globally in commit
98e24b0dedc.
-- Collect and report the accounting of the batch step and its children.
-- Add configure checks for faccessat and eaccess, and make use of one of
them if available.
-- Make configure --enable-developer also set --enable-debug
-- Introduce a SchedulerParameters variable kill_invalid_depend, if set
then jobs pending with invalid dependency are going to be terminated.
-- Move spank_user_task() call in slurmstepd after the task_g_pre_launch()
so that the task affinity information is available to spank.
-- Make /etc/init.d/slurm script return value 3 when the daemon is
not running. This is required by Linux Standard Base Core
Specification 3.1
* Changes in Slurm 14.11.0rc2
=============================
-- Logs for jobs which are explicitly requeued will say so rather than saying
that a node in their allocation failed.
-- Updated the documentation about the remote licenses served by
the Slurm database.
-- Insure that slurm_spank_exit() is only called once from srun.
-- Change the signature of net_set_low_water() to use 4 bytes instead of 8.
-- Export working_cluster_rec in libslurmdb.so as well as move some function
definitions needed for drmaa.
-- If using cons_res or serial cause a fatal in the plugin instead of causing
the SelectTypeParameters to magically set to CR_CPU.
-- Enhance task/affinity auto binding to consider tasks * cpus-per-task.
-- Fix regression the priority/multifactor which would cause memory corruption.
Issue is only in rc1.
-- Add PrivateData value of "cloud". If set, powered down nodes in the cloud
will be visible.
-- Sched/backfill - Eliminate clearing start_time of running jobs.
-- Fix various backwards compatibility issues.
-- If failed to launch a batch job, requeue it in hold.
* Changes in Slurm 14.11.0rc1
=============================
-- When using cgroup name the batch step as step_batch instead of
batch_4294967294
-- Changed LEVEL_BASED priority to be "Fair_Tree"
-- BGQ - Add cnode based reservations.
-- Alongside totalview_jobid implement totalview_stepid available
to sattach.
-- Add ability to include other files in slurm.conf based upon the ClusterName.
-- Add reservation information in the sacct and sreport output.
-- Add job priority calculation check for overflow and fix memory leak.
-- Add SchedulerParameters option of pack_serial_at_end to put serial jobs at
the end of the available nodes rather than using a best fit algorithm.
-- Allow regular users to view default sinfo output when
privatedata=reservations is set.
-- PrivateData=reservation modified to permit users to view the reservations
which they have access to (rather then preventing them from seeing ANY
reservation).
-- job_submit/lua: Fix job_desc set field logic
* Changes in Slurm 14.11.0pre5
==============================
-- Fix sbatch --export=ALL, it was treated by srun as a request to explicitly
export only the environment variable named "ALL".
-- Improve scheduling of jobs in reservations that overlap other reservations.
-- Modify sgather to make global file systems easier to configure.
-- Added sacctmgr reconfig to reread the slurmdbd.conf in the slurmdbd.
-- Modify scontrol job operations to accept comma delimited list of job IDs.
Applies to job update, hold, release, suspend, resume, requeue, and
requeuehold operations.
-- Refactor job_submit/lua interface. LUA FUNCTIONS NEED TO CHANGE! The
lua script no longer needs to explicitly load meta-tables, but information
is available directly using names slurm.reservations, slurm.jobs,
slurm.log_info, etc. Also, the job_submit.lua script is reloaded when
updated without restarting the slurmctld daemon.
-- Allow users to specify --resv_ports to have value 0.
-- Cray MPMD (Multiple-Program Multiple-Data) support completed.
-- Added ability for "scontrol update" to references jobs by JobName (and
filtered optionally by UserID).
-- Add support for an advanced reservation start time that remains constant
relative to the current time. This can be used to prevent the starting of
longer running jobs on select nodes for maintenance purpose. See the
reservation flag "TIME_FLOAT" for more information.
-- Enlarge the jobid field to 18 characters in squeue output.
-- Added "scontrol write config" option to save a copy of the current
configuration in a file containing a time stamp.
-- Eliminate native Cray specific port management. Native Cray systems must
now use the MpiParams configuration parameter to specify ports to be used
for commmunications. When upgrading Native Cray systems from version 14.03,
all running jobs should be killed and the switch_cray_state file (in
SaveStateLocation of the nodes where the slurmctld daemon runs) must be
explicitly deleted.
* Changes in Slurm 14.11.0pre4
==============================
-- Added job array data structure and removed 64k array size restriction.
-- Added SchedulerParameters options of bf_max_job_array_resv to control how
many tasks of a job array should have resources reserved for them.
-- Added more validity checking of incoming job submit requests.
-- Added srun --export option to set/export specific environment variables.
-- Scontrol modified to print separate error messages for job arrays with
different exit codes on the different tasks of the job array. Applies to
job suspend and resume operations.
-- Fix race condition in CPU frequency set with job preemption.
-- Always call select plugin on step termination, even if the job is also
complete.
-- Srun executable names beginning with "." will be resolved based upon the
working directory and path on the compute node rather than the submit node.
-- Add node state string suffix of "$" to identify nodes in maintenance
reservation or scheduled for reboot. This applies to scontrol, sinfo,
and sview commands.
-- Enable scontrol to clear a nodes's scheduled reboot by setting its state
to "RESUME".
-- As per sbatch and srun documentation when the --signal option is used
signal only the steps and unless, in the case, of a batch job B is
specified in which case signal only the batch script.
-- Modify AuthInfo configuration parameter to accept credential lifetime
option.
-- Modify crypto/munge plugin to use socket and timeout specified in AuthInfo.
-- If we have a state for a step on completion put that in the database
instead of guessing off the exit_code.
-- Added squeue -P/--priority option that can be used to display pending jobs
in the same order as used by the Slurm scheduler even if jobs are submitted
to multiple partitions (job is reported once per usable partition).
-- Improve the pending reason description for various QOS limits. For each
QOS limit that causes a job to be pending print its specific reason.
For example if job pends because of GrpCpus the squeue command will
print QOSGrpCpuLimit as pending reason.
-- sched/backfill - Set expected start time of job submitted to multiple
partitions to the earliest start time on any of the partitions.
-- Introduce a MAX_BATCH_REQUEUE define that indicates how many times a job
can be requeued upon prolog failure. When the number is reached the job
is put on hold with reason JobHoldMaxRequeue.
-- Add sbatch job array option to limit the number of simultaneously running
tasks from a job array (e.g. "--array=0-15%4").
-- Implemented a new QOS limit MinCPUs. Users running under a QOS must
request a minimum number of CPUs which is at least MinCPUs otherwise
their job will pend.
-- Introduced a new pending reason WAIT_QOS_MIN_CPUS to reflect the new QOS
limit.
-- Job array dependency based upon state is now dependent upon the state of
the array as a whole (e.g. afterok requires ALL tasks to complete
sucessfully, afternotok is true if ANY tasks does not complete successfully,
and after requires all tasks to at least be started).
-- The srun -u/--unbuffered options set the stdout of the task launched
by srun to be line buffered.
-- The srun options -/--label and -u/--unbuffered can be specified together.
This limitation has been removed.
-- Provide sacct display of gres accounting information per job.
-- Change the node status size from uin16_t to uint32_t.
* Changes in Slurm 14.11.0pre3
==============================
-- Move xcpuinfo.[c|h] to the slurmd since it isn't needed anywhere else
and will avoid the need for all the daemons to link to libhwloc.
-- Add memory test to job_submit/partition plugin.
-- Added new internal Slurm functions xmalloc_nz() and xrealloc_nz(), which do
not initialize the allocated memory to zero for improved performance.
-- Modify hostlist function to dynamically allocate buffer space for improved
performance.
-- In the job_submit plugin: Remove all slurmctld locks prior to job_submit()
being called for improved performance. If any slurmctld data structures are
read or modified, add locks directly in the plugin.
-- Added PriorityFlag LEVEL_BASED described in doc/html/level_based.shtml
-- If Fairshare=parent is set on an account, that account's children will be
effectively reparented for fairshare calculations to the first parent of
their parent that is not Fairshare=parent. Limits remain the same,
only it's fairshare value is affected.
* Changes in Slurm 14.11.0pre2
==============================
-- Added AllowSpecResourcesUsage configuration parameter in slurm.conf. This
allows jobs to use specialized resources on nodes allocated to them if the
job designates --core-spec=0.
-- Add new SchedulerParameters option of build_queue_timeout to throttle how
much time can be consumed building the job queue for scheduling.
-- Added HealthCheckNodeState option of "cycle" to cycle through the compute
nodes over the course of HealthCheckInterval rather than running all at
the same time.
-- Add job "reboot" option for Linux clusters. This invokes the configured
RebootProgram to reboot nodes allocated to a job before it begins execution.
-- Added squeue -O/--Format option that makes all job and step fields available
for printing.
-- Improve database slurmctld entry speed dramatically.
-- Add "CPUs" count to output of "scontrol show step".
-- scancel -b signals only the batch step neither any other step nor any
children of the shell script.
-- MySQL - enforce NO_ENGINE_SUBSTITUTION
-- Added CpuFreqDef configuration parameter in slurm.conf to specify the
default CPU frequency and governor to be set at job end.
-- Added support for job email triggers: TIME_LIMIT, TIME_LIMIT_90 (reached
90% of time limit), TIME_LIMIT_80 (reached 80% of time limit), and
TIME_LIMIT_50 (reached 50% of time limit). Applies to salloc, sbatch and
srun commands.
-- In slurm.conf add the parameter SrunPortRange=min-max. If this is configured
then srun will use its dynamic ports only from the configured range.
-- Make debug_flags 64 bit to handle more flags.
* Changes in Slurm 14.11.0pre1
==============================
-- Modify etc/cgroup.release_common.example to set specify full path to the
scontrol command. Also find cgroup mount point by reading cgroup.conf file.
-- Improve qsub wrapper support for passing environment variables.
-- Modify sdiag to report Slurm RPC traffic by user, type, count and time
consumed.
-- In select plugins, stop triggering extra logging based upon the debug flag
-- Added SchedulerParameters options of bf_yield_interval and bf_yield_sleep
to control how frequently and for how long the backfill scheduler will
relinquish its locks.
-- To support larger numbers of jobs when the StateSaveDirectory is on a
file system that supports a limited number of files in a directory, add a
subdirectory called "hash.#" based upon the last digit of the job ID.
-- More gracefully handle missing batch script file. Just kill the job and do
not drain the compute node.
-- Add support for allocation of GRES by model type for heterogenous systems
(e.g. request a Kepler GPU, a Tesla GPU, or a GPU of any type).
-- Record and enable display of nodes anticipated to be used for pending jobs.
-- Modify squeue --start option to print the nodes expected to be used for
pending job (in addition to expected start time, etc.).
-- Add association hash to the assoc_mgr.
-- Better logic to handle resized jobs when the DBD is down.
-- Introduce MemLimitEnforce yes|no in slurm.conf. If set no Slurm will
not terminate jobs if they exceed requested memory.
-- Add support for non-consumable generic resources for resources that are
limited, but can be shared between jobs.
-- Introduce 5 new Slurm errors in slurm_errno.h related to job to better
-- Modify scontrol to print error message for each array task when updating
the entire array.
-- Added gres_drain and gres_used fields to node_info_t.
-- Added PriorityParameters configuration parameter in slurm.conf.
-- Introduce automatic job requeue policy based on exit value. See RequeueExit
and RequeueExitHold descriptions in slurm.conf man page.
-- Modify slurmd to cache launched job IDs for more responsive job suspend and
gang scheduling.
-- Permit jobs steps full control over cpu_bind options if specialized cores
are included in the job allocation.
-- Added ChosLoc configuration parameter to specifiy the pathname of the
Chroot OS tool.
-- Sent SIGCONT/SIGTERM when a job is selected for preemption with GraceTime
configured rather than waiting for GraceTime to be reached before notifying
the job.
-- Do not resume a job with specialized cores on a node running another job
with specialized cores (only one can run at a time).
-- Add specialized core count to job suspend/resume calls.
-- task/affinity and task/cgroup - Correct specialized core task binding with
user supplied invalid CPU mask or map.
-- Add srun --cpu-freq options to set the CPU governor (OnDemand, Performance,
PowerSave or UserSpace).
-- Add support for a job step's CPU governor and/or frequency to be reset on
suspend/resume (or gang scheduling). The default for an idle CPU will now
be "ondemand" rather than "userspace" with the lowest frequency (to recover
from hard slurmd failures and support gang scheduling).
-- Added PriorityFlags option of Calulate_Running to continue recalculating
the priority of running jobs.
-- Replace round-robin front-end node selection with least-loaded algorithm.
-- CRAY - Improve support of XC30 systems when running natively.
-- Add new node configuration parameters CoreSpecCount, CPUSpecList and
MemSpecLimit which support the reservation of resources for system use
with Linux cgroup.
-- Add child_forked() function to the slurm_acct_gather_profile plugin to
close open files, leaving application with no extra open file descriptors.
-- Cray/ALPS system - Enable backup controller to run outside of the Cray to
accept new job submissions and most other operations on the pending jobs.
-- Have sacct print job and task array id's for job arrays.
-- If <sys/prctl.h> is present name major threads in slurmctld, for
example backfill
thread: slurmctld_bckfl, the rpc manager: slurmctld_rpcmg etc.
The name can be seen for example using top -H.
-- Provide more precise error message when job allocation can not be satisfied
(e.g. memory, disk, cpu count, etc. rather than just "node configuration
not available").
-- Create a new DebugFlags named TraceJobs in slurm.conf to print detailed
information about jobs in slurmctld. The information include job ids, state
and node count.
-- When a job dependency can never be satisfied do not cancel the job but keep
pending with reason WAIT_DEP_INVALID (DependencyNeverSatisfied).
* Changes in Slurm 14.03.12
===========================
-- Make it so previous versions of salloc/srun work with newer versions
of Slurm daemons.
-- Avoid delay on commit for PMI rank 0 to improve performance with some
MPI implementations.
-- Correct the sbatch pbs parser to process -j.
-- Squeue modified to not merge tasks of a job array if their wait reasons
differ.
-- Use the slurm_getpwuid_r wrapper of getpwuid_r to handle possible
interrupts.
-- Allow --ignore-pbs to take effect when read as an #SBATCH argument.
* Changes in Slurm 14.03.11
===========================
-- ALPS - Fix depth for Memory items in BASIL with CLE 5.2
(changed starting in 5.2.3).
-- ALPS - Fix issue when tracking memory on a PerNode basis instead of
PerCPU.
-- Modify assoc_mgr_fill_in_qos() to allow for a flag to know if the QOS read
lock was locked outside of the function or not.
-- Give even better estimates on pending node count if no node count
is requested.
-- Fix jobcomp/mysql plugin for MariaDB 10+/Mysql 5.6+ to work with reserved
work "partition".
-- If requested (scontrol reboot node_name) reboot a node even if it has
an maintenance reservation that is not active yet.
-- Fix issue where exclusive allocations wouldn't lay tasks out correctly
with CR_PACK_NODES.
-- Do not requeue a batch job from slurmd daemon if it is killed while in
the process of being launched (a race condition introduced in v14.03.9).
-- Do not let srun overwrite SLURM_JOB_NUM_NODES if already in an allocation.
Brian Christiansen
committed
-- Prevent a job's end_time from being too small after a basil reservation
error.
Brian Christiansen
committed
-- Fix sbatch --ntasks-per-core option from setting invalid
SLURM_NTASKS_PER_CORE environment value.
-- Prevent scancel abort when no job satisfies filter options.
-- ALPS - Fix --ntasks-per-core option on multiple nodes.
-- Double max string that Slurm can pack from 16MB to 32MB to support
larger MPI2 configurations.
-- Log Cray MPI job calling exit() without mpi_fini(), but do not treat it as
a fatal error. This partially reverts logic added in version 14.03.9.
-- sview - Fix displaying of suspended steps elapsed times.
-- Increase number of messages that get cached before throwing them away
when the DBD is down.
Brian Christiansen
committed
-- Fix jobs from starting in overlapping reservations that won't finish before
a "maint" reservation begins.
-- Fix "squeue --start" to override SQUEUE_FORMAT env variable.
-- Restore GRES functionality with select/linear plugin. It was broken in
version 14.03.10.
-- Fix possible race condition when attempting to use QOS on a system running
accounting_storage/filetxt.
-- Sanity check for Correct QOS on startup.
* Changes in Slurm 14.03.10
===========================
-- Treat non-zero SlurmSchedLogLevel without SlurmSchedLogFile as a fatal
error.
-- Correct sched_config.html documentation SchedulingParameters
should be SchedulerParameters.
-- When using gres and cgroup ConstrainDevices set correct access
permission for the batch step.
-- Fix minor memory leak in jobcomp/mysql on slurmctld reconfig.
-- Fix bug that prevented preservation of a job's GRES bitmap on slurmctld
restart or reconfigure (bug was introduced in 14.03.5 "Clear record of a
job's gres when requeued" and only applies when GRES mapped to specific
files).
-- BGQ: Fix race condition when job fails due to hardware failure and is
requeued. Previous code could result in slurmctld abort with NULL pointer.
-- Prevent negative job array index, which could cause slurmctld to crash.
-- Fix issue with squeue/scontrol showing correct node_cnt when only tasks
are specified.
-- Check the status of the database connection before using it.
-- ALPS - If an allocation requests -n set the BASIL -N option to the
amount of tasks / number of node.
-- ALPS - Don't set the env var APRUN_DEFAULT_MEMORY, it is not needed anymore.
-- Give better estimates on pending node count if no node count is requested.
-- BLUEGENE - Fix issue where requeuing jobs could cause an assert.
* Changes in Slurm 14.03.9
==========================
-- If slurmd fails to stat(2) the configuration print the string describing
the error code.
-- Fix for mixing core base reservations with whole node based reservations
to avoid overlapping erroneously.
-- BLUEGENE - Remove references to Base Partition.
-- sview - If compiled on a non-bluegene system then used to view a BGQ fix
to allow sview to display blocks correctly.
-- Fix bug in update reservation. When modifying the reservation the end time
was set incorrectly.
-- The start time of a reservation that is in ACTIVE state cannot be modified.
-- Update the cgroup documentation about release agent for devices.
-- MYSQL - fix for setting up preempt list on a QOS for multiple QOS.
-- Correct a minor error in the scancel.1 man page related to the
--signal option.
-- Enhance the scancel.1 man page to document the sequence of signals sent
-- Fix slurmstepd core dump if the cgroup hierarchy is not completed
when terminating the job.
-- Fix hostlist_shift to be able to give correct node names on names with a
different number of dimensions than the cluster.
-- BLUEGENE - Fix invalid pointer in corner case in the plugin.
-- Make sure on a reconfigure the select information for a node is preserved.
-- Correct logic to support job GRES specification over 31 bits (problem
in logic converting int to uint32_t).
-- Remove logic that was creating GRES bitmap for node when not needed (only
needed when GRES mapped to specific files).
-- BLUEGENE - Fix sinfo -tr before it would only print idle nodes correctly.
-- BLUEGENE - Fix for licenses_only reservation on bluegene systems.
-- sview - Verify pointer before using strchr.
-- -M option on tools talking to a Cray from a non-Cray fixed.
-- CRAY - Fix rpmbuild issue for missing file slurm.conf.template.
-- Fix race condition when dealing with removing many associations at
different times when reservations are using the associations that are
being deleted.
-- When a node's state is set to power_down/power_up, then execute
SuspendProgram/ResumeProgram even if previously executed for that node.
-- Fix logic determining when job configuration (i.e. running node power up
logic) is complete.
-- Setting the state of a node in powered down state node to "resume" will
no longer cause it to reboot, but only clear the "drain" state flag.
Brian Christiansen
committed
-- Fix srun documentation to remove SLURM_NODELIST being equivalent as the -w
option (since it isn't).
-- Fix issue with --hint=nomultithread and allocations with steps running
arbitrary layouts (test1.59).
-- PrivateData=reservation modified to permit users to view the reservations
which they have access to (rather then preventing them from seeing ANY
reservation). Backport from 14.11 commit 77c2bd25c.
-- Fix PrivateData=reservation when using associations to give privileges to
a reservation.
-- Better checking to see if select plugin is linear or not.
-- Add support for time specification of "fika" (3 PM).
-- Provide better estimate of minimum node count for pending jobs using more
job parameters.
-- ALPS - Add SubAllocate to cray.conf file for those who like the way <=2.5
did the ALPS reservation.
-- Safer check to avoid invalid reads when shutting down the slurmctld with
lots of jobs.
-- Fix minor memory leak in the backfill scheduler when shutting down.
-- Add ArchiveResvs to the output of sacctmgr show config and init the variable
on slurmdbd startup.
-- SLURMDBD - Only set the archive flag if purging the object
(i.e ArchiveJobs PurgeJobs). This is only a cosmetic change.
-- Fix for job step memory allocation logic if step requests GRES and memory
is not allocations are not managed.
-- Fix sinfo to display mixed nodes as allocated in '%F' output.
-- Sview - Fix cpu and node counts for partitions.
-- Ignore NO_VAL in SLURMDB_PURGE_* macros.
-- ALPS - Don't drain nodes if epilog fails. It leaves them in drain state
with no way to get them out.
-- Fix issue with task/affinity oversubscribing cpus erroneously when
using --ntasks-per-node.
-- MYSQL - Fix load of archive files.
-- Treat Cray MPI job calling exit() without mpi_fini() as fatal error for
that specific task and let srun handle all timeout logic.
-- Fix small memory leak in jobcomp/mysql.
-- Correct tracking of licenses for suspended jobs on slurmctld reconfigure or
restart.
-- If failed to launch a batch job requeue it in hold.
* Changes in Slurm 14.03.8
==========================
-- Fix minor memory leak when Job doesn't have nodes on it (Meaning the job
has finished)
-- Fix sinfo/sview to be able to query against nodes in reserved and other
states.
-- Make sbatch/salloc read in (SLURM|(SBATCH|SALLOC))_HINT in order to
handle sruns in the script that will use it.
-- srun properly interprets a leading "." in the executable name based upon
the working directory of the compute node rather than the submit host.
-- Fix Lustre misspellings in hdf5 guide
Kilian Cavalotti
committed
-- Fix wrong reference in slurm.conf man page to what --profile option should
be used for AcctGatherFilesystemType.
-- Update HDF5 document to point out the SlurmdUser is who creates the
ProfileHDF5Dir directory as well as all it's sub-directories and files.
-- CRAY NATIVE - Remove error message for srun's ran inside an salloc that
had --network= specified.
-- Defer job step initiation of required GRES are in use by other steps rather
than immediately returning an error.
-- Deprecate --cpu_bind from sbatch and salloc. These never worked correctly
and only caused confusion since the cpu_bind options mostly refer to a
step we opted to only allow srun to set them in future versions.
-- Modify sgather to work if Nodename and NodeHostname differ.
-- Changed use of JobContainerPlugin where it should be JobContainerType.
-- Fix for possible error if job has GRES, but the step explicitly requests a
GRES count of zero.
-- Make "srun --gres=none ..." work when executed without a job allocation.
-- Change the global eio_shutdown_time to a field in eio handle.
-- Advanced reservation fixes for heterogeneous systems, especially when
reserving cores.
-- If --hint=nomultithread is used in a job allocation make sure any srun's
ran inside the allocation can read the environment correctly.
-- If batchdir can't be made set errno correctly so the slurmctld is notified
correctly.
-- Remove repeated batch complete if batch directory isn't able to be made
since the slurmd will send the same message.
-- sacctmgr fix default format for list transactions.
-- BLUEGENE - Fix backfill issue with backfilling jobs on blocks already
reserved for higher priority jobs.
-- When creating job arrays the job specification files for each elements
are hard links to the first element specification files. If the controller
fails to make the links the files are copied instead.
-- Fix error handling for job array create failure due to inability to copy
job files (script and environment).
-- Added patch in the contribs directory for integrating make version 4.0 with
Slurm and renamed the previous patch "make-3.81.slurm.patch".
-- Don't wait for an update message from the DBD to finish before sending rc
message back. In slow systems with many associations this could speed
responsiveness in sacctmgr after adding associations.
-- Eliminate race condition in enforcement of MaxJobCount limit for job arrays.
-- Fix anomaly allocating cores for GRES with specific device/CPU mapping.
-- cons_res - When requesting exclusive access make sure we set the number
of cpus in the job_resources_t structure so as nodes finish the correct
cpu count is displayed in the user tools.
-- If the job_submit plugin calls take longer than 1 second to run, print a
warning.
-- Make sure transfer_s_p_options transfers all the portions of the
s_p_options_t struct.
-- Correct the srun man page, the SLURM_CPU_BIND_VERBOSE, SLURM_CPU_BIND_TYPE
SLURM_CPU_BIND_LIST environment variable are set only when task/affinity
plugin is configured.
-- sacct - Initialize variables correctly to avoid incorrect structure
reference.
-- Performance adjustment to avoid calling a function multiple times when it
only needs to be called once.
-- Give more correct waiting reason if job is waiting on association/QOS
MaxNode limit.
-- DB - When sending lft updates to the slurmctld only send non-deleted lfts.
-- BLUEGENE - Fix documentation on how to build a reservation less than
a midplane.
-- If Slurmctld fails to read the job environment consider it an error
and abort the job.
-- Add the name of the node a job is running on to the message printed by
slurmstepd when terminating a job.
-- Remove unsupported options from sacctmgr help and the dump function.
-- Update sacctmgr man page removing reference to obsolete parameter
MaxProcSecondsPerJob.
-- Added more validity checking of incoming job submit requests.
* Changes in Slurm 14.03.7
==========================
-- Add note to MaxNodesPerUser and multiple jobs running on the same node
counting as multiple nodes.
-- PerlAPI - fix renamed call from slurm_api_set_conf_file to
slurm_conf_reinit.
-- Fix gres race condition that could result in job deallocation error message.
-- Correct NumCPUs count for jobs with --exclusive option.
-- When creating reservation with CoreCnt, check that Slurm uses
SelectType=select/cons_res, otherwise don't send the request to slurmctld
and return an error.
-- Save the state of scheduled node reboots so they will not be lost should the
slurmctld restart.
-- In select/cons_res plugin - Insure the node count does not exceed the task
count.
-- switch/nrt - Do not explicitly unload windows for a job on termination,
only unload its table (which automatically unloads its windows).
-- When HealthCheckNodeState is configured as IDLE don't run the
HealthCheckProgram for nodes in any other states than IDLE.
-- Remove all slurmctld locks prior to job_submit() being called in plugins.
If any slurmctld data structures are read or modified, add locks directly
in the plugin.
-- Minor sanity check to verify the string sent in isn't NULL when using
bit_unfmt.
-- CRAY NATIVE - Fix issue on heavy systems to only run the NHC once per
job/step completion.
-- Remove unneeded step cleanup for pending steps.
-- Fix issue where if a batch job was manually requeued the batch step
information wasn't stored in accounting.
-- When job is release from a requeue hold state clean up its previous
exit code.
-- Correct the srun man page about how the output from the user application
is sent to srun.
-- Increase the timeout of the main thread while waiting for the i/o thread.
Allow up to 180 seconds for the i/o thread to complete.
-- When using sacct -c to read the job completion data compute the correct
job elapsed time.
-- Perl package: Define some missing node states.
-- When using AccountingStorageType=accounting_storage/mysql zero out the
database index for the array elements avoiding duplicate database values.
-- Reword the explanation of cputime and cputimeraw in the sacct man page.
-- JobCompType allows "jobcomp/mysql" as valid name but the code used
"job_comp/mysql" setting an incorrect default database.
-- Try to load libslurm.so only when necessary.
-- When nodes scheduled for reboot, set state to DOWN rather than FUTURE so
they are still visible to sinfo. State set to IDLE after reboot completes.
-- Apply BatchStartTimeout configuration to task launch and avoid aborting
srun commands due to long running Prolog scripts.
-- Fix minor memory leaks when freeing node_info_t structure.
-- If a batch script is requeued and running steps get correct exit code/signal
previous it was always -2.
-- If step exitcode hasn't been set display with sacct the -2 instead
of acting like it is a signal and exitcode.
-- Send calculated step_rc for batch step instead of raw status as
done for normal steps.
-- If a job times out, set the exit code in accounting to 1 instead of the
signal 1.
-- Update the acct_gather.conf.5 man page removing the reference to
InfinibandOFEDFrequency.
-- Fix gang scheduling for jobs submitted to multiple partitions.
-- Enable srun to submit job to multiple partitions.
-- Update slurm.conf man page. When Epilog or Prolog fail the node state
is set ro DRAIN.
-- Start a job in the highest priority partition possible, even if it requires
preempting other jobs and delaying initiation, rather than using a lower
priority partition. Previous logic would preempt lower priority jobs, but
then might start the job in a lower priority partition and not use the
resources released by the preempted jobs.
-- Fix SelectTypeParameters=CR_PACK_NODES for srun making both job and step
resource allocation.
-- BGQ - Make it possible to pack multiple tasks on a core when not using
the entire cnode.
-- MYSQL - if unable to connect to mysqld close connection that was inited.
-- DBD - when connecting make sure we wait MessageTimeout + 5 since the
timeout when talking to the Database is the same timeout so a race
condition could occur in the requesting client when receiving the response
if the database is unresponsive.
* Changes in Slurm 14.03.6
==========================
-- Added examples to demonstrate the use of the sacct -T option to the man
page.
-- Fix for regression in 14.03.5 with sacctmgr load when Parent has "'"
around it.
-- Update comments in sacctmgr dump header.
-- Fix for possible abort on change in GRES configuration.
-- CRAY - fix modules file, (backport from 14.11 commit 78fe86192b.
-- Fix race condition which could result in requeue if batch job exit and node
registration occur at the same time.
-- switch/nrt - Unload job tables (in addition to windows) in user space mode.
-- Differentiate between two identical debug messages about purging vestigial
job scripts.
-- If the socket used by slurmstepd to communicate with slurmd exist when
slurmstepd attempts to create it, for example left over from a previous
requeue or crash, delete it and recreate it.
* Changes in Slurm 14.03.5
==========================
-- If a srun runs in an exclusive allocation and doesn't use the entire
allocation and CR_PACK_NODES is set layout tasks appropriately.
-- Correct Shared field in job state information seen by scontrol, sview, etc.
-- Print Slurm error string in scontrol update job and reset the Slurm errno
before each call to the API.
-- Fix task/cgroup to handle -mblock:fcyclic correctly
-- Fix for core-based advanced reservations where the distribution of cores
across nodes is not even.
-- Fix issue where association maxnodes wouldn't be evaluated correctly if a
QOS had a GrpNodes set.
-- GRES fix with multiple files defined per line in gres.conf.
-- When a job is requeued make sure accounting marks it as such.
-- Print the state of requeued job as REQUEUED.
-- Fix if a job's partition was taken away from it don't allow a requeue.
-- Make sure we lock on the conf when sending slurmd's conf to the slurmstepd.
-- Fix issue with sacctmgr 'load' not able to gracefully handle bad formatted
file.
-- sched/backfill: Correct job start time estimate with advanced reservations.
-- Error message added when in proctrack/cgroup the step freezer path isn't
able to be destroyed for debug.
-- Added extra index's into the database for better performance when
deleting users.
-- Fix issue with wckeys when tracking wckeys, but not enforcing them,
you could get multiple '*' wckeys.
-- Fix bug which could report to squeue the wrong partition for a running job
that is submitted to multiple partitions.
-- Report correct CPU count allocated to job when allocated whole node even if
not using all CPUs.
-- If job's constraints cannot be satisfied put it in pending state with reason
BadConstraints and don't remove it.
-- sched/backfill - If job started with infinite time limit, set its end_time
one year in the future.
-- Clear QOS GrpUsedCPUs when resetting raw usage if QOS is not using any cpus.
-- Remove log message left over from debugging.
-- When using CR_PACK_NODES fix make --ntasks-per-node work correctly.
-- Report correct partition associated with a step if the job is submitted to
multiple partitions.
-- Fix to allow removing of preemption from a QOS
-- If the proctrack plugins fail to destroy the job container print an error
message and avoid to loop forever, give up after 120 seconds.
-- Make srun obey POSIX convention and increase the exit code by 128 when the
process terminated by a signal.
-- Sanity check for acct_gather_energy/rapl
-- If the proctrack plugins fail to destroy the job container print an error
message and avoid to loop forever, give up after 120 seconds.
-- If the sbatch command specifies the option --signal=B:signum sent the signal
to the batch script only.
-- If we cancel a task and we have no other exit code send the signal and
exit code.
-- Added note about InnoDB storage engine being used with MySQL.
-- Set the job exit code when the job is signaled and set the log level to
debug2() when processing an already completed job.
-- Reset diagnostics time stamp when "sdiag --reset" is called.
-- squeue and scontrol to report a job's "shared" value based upon partition
options rather than reporting "unknown" if job submission does not use
--exclusive or --shared option.
-- task/cgroup - Fix cpuset binding for batch script.
-- sched/backfill - Fix anomaly that could result in jobs being scheduled out
of order.
-- Expand pseudo-terminal size data structure field sizes from 8 to 16 bits.
-- Set the job exit code when the job is signaled and set the log level to
-- Distinguish between two identical error messages.
-- If using accounting_storage/mysql directly without a DBD fix issue with
start of requeued jobs.
-- If a job fails because of batch node failure and the job is requeued and an
epilog complete message comes from that node do not process the batch step
information since the job has already been requeued because the epilog
script running isn't guaranteed in this situation.
-- Change message to note a NO_VAL for return code could of come from node
failure as well as interactive user.
-- Modify test4.5 to only look at one partition instead of all of them.
-- Fix sh5util -u to accept username different from the user that runs the
command.
-- Corrections to man pages:salloc.1 sbatch.1 srun.1 nonstop.conf.5
slurm.conf.5.
-- Have sacctmgr dump cluster handle situations where users or such have
special characters in their names like ':'
-- Add more debugging for information should the job ran on wrong node
and should there be problems accessing the state files.
-- Fix issue where not enforcing QOS but a partition either allows or denies
them.
-- CRAY - Make switch/cray default when running on a Cray natively.
-- CRAY - Make job_container/cncu default when running on a Cray natively.
-- Disable job time limit change if it's preemption is in progress.
-- Correct logic to properly enforce job preemption GraceTime.
-- Fix sinfo -R to print each down/drained node once, rather than once per
partition.
-- If a job has non-responding node, retry job step create rather than
returning with DOWN node error.
-- Support SLURM_CONF path which does not have "slurm.conf" as the file name.
-- CRAY - make job_container/cncu default when running on a Cray natively
-- Fix issue where batch cpuset wasn't looked at correctly in
jobacct_gather/cgroup.
-- Correct squeue's job node and CPU counts for requeued jobs.
-- Correct SelectTypeParameters=CR_LLN with job selecition of specific nodes.
-- Only if ALL of their partitions are hidden will a job be hidden by default.
-- Run EpilogSlurmctld for a job is killed during slurmctld reconfiguration.
-- Close window with srun if waiting for an allocation and while printing
something you also get a signal which would produce deadlock.
-- Add SelectTypeParameters option of CR_PACK_NODES to pack a job's tasks
tightly on its allocated nodes rather than distributing them evenly across
the allocated nodes.
-- cpus-per-task support: Try to pack all CPUs of each tasks onto one socket.
Previous logic could spread the tasks CPUs across multiple sockets.
-- Add new distribution method fcyclic so when a task is using multiple cpus
it can bind cyclically across sockets.
-- task/affinity - When using --hint=nomultithread only bind to the first
thread in a core.
-- Make cgroup task layout (block | cyclic) method mirror that of
task/affinity.
-- If TaskProlog sets SLURM_PROLOG_CPU_MASK reset affinity for that task
based on the mask given.
-- Keep supporting 'srun -N x --pty bash' for historical reasons.
-- If EnforcePartLimits=Yes and QOS job is using can override limits, allow
it.
-- Fix issues if partition allows or denies account's or QOS' and either are
not set.
-- If a job requests a partition and it doesn't allow a QOS or account the
job is requesting pend unless EnforcePartLimits=Yes. Before it would
always kill the job at submit.
-- Fix format output of scontrol command when printing node state.
-- Improve the clean up of cgroup hierarchy when using the
jobacct_gather/cgroup plugin.
-- Added SchedulerParameters value of Ignore_NUMA.
-- Fix issues with code when using automake 1.14.1
-- select/cons_res plugin: Fix memory leak related to job preemption.
-- After reconfig rebuild the job node counters only for jobs that have
not finished yet, otherwise if requeued the job may enter an invalid
COMPLETING state.
-- Do not purge the script and environment files for completed jobs on
slurmctld reconfiguration or restart (they might be later requeued).
-- scontrol now accepts the option job=xxx or jobid=xxx for the requeue,
requeuehold and release operations.
-- task/cgroup - fix to bind batch job in the proper CPUs.
-- Added strigger option of -N, --noheader to not print the header when
displaying a list of triggers.
-- Modify strigger to accept arguments to the program to execute when an
event trigger occurs.
-- Attempt to create duplicate event trigger now generates ESLURM_TRIGGER_DUP
("Duplicate event trigger").
-- Treat special characters like %A, %s etc. literally in the file names
when specified escaped e.g. sbatch -o /home/zebra\\%s will not expand
%s as the stepid of the running job.
-- CRAYALPS - Add better support for CLE 5.2 when running Slurm over ALPS.
-- Test time when job_state file was written to detect multiple primary
slurmctld daemons (e.g. both backup and primary are functioning as
primary and there is a split brain problem).
-- Fix scontrol to accept update jobid=# numtasks=#
-- If the backup slurmctld assumes primary status, then do NOT purge any
job state files (batch script and environment files) and do not re-use them.
This may indicate that multiple primary slurmctld daemons are active (e.g.
both backup and primary are functioning as primary and there is a split
brain problem).
-- Set correct error code when requeuing a completing/pending job
-- When checking for if dependency of type afterany, afterok and afternotok
don't clear the dependency if the job is completing.
-- Cleanup the JOB_COMPLETING flag and eventually requeue the job when the
last epilog completes, either slurmd epilog or slurmctld epilog, whichever
comes last.
-- When attempting to requeue a job distinguish the case in which the job is
JOB_COMPLETING or already pending.
-- When reconfiguring the controller don't restart the slurmctld epilog if it
is already running.
-- Email messages for job array events print now use the job ID using the
format "#_# (#)" rather than just the internal job ID.
-- Set the number of free licenses to be 0 if the global license count
decreases and total is less than in use.
-- Add DebugFlag of BackfillMap. Previously a DebugFlag value of Backfill
logged information about what it was doing plus a map of expected resouce
use in the future. Now that very verbose resource use map is only logged
with a DebugFlag value of BackfillMap
-- Modify the description of -E and -S option of sacct command as point in time
'before' or 'after' the database records are returned.
-- Correct support for partition with Shared=YES configuration.
-- If job requests --exclusive then do not use nodes which have any cores in an
advanced reservation. Also prevents case where nodes can be shared by other
jobs.
-- For "scontrol --details show job" report the correct CPU_IDs when thre are
multiple threads per core (we are translating a core bitmap to CPU IDs).
-- If DebugFlags=Protocol is configured in slurm.conf print details of the
connection, ip address and port accepted by the controller.
-- Fix minor memory leak when reading in incomplete node data checkpoint file.
-- Enlarge the width specifier when printing partition SHARE to display larger
sharing values.
-- sinfo locks added to prevent possibly duplicate record printing for
resources in multiple partitions.
* Changes in Slurm 14.03.3-2
============================
* Changes in Slurm 14.03.3
==========================
-- Correction to default batch output file name. In version 14.03.2 was using
"slurm_<jobid>_4294967294.out" due to error in job array logic.
-- In slurm.spec file, replace "Requires cray-MySQL-devel-enterprise" with
"Requires mysql-devel".
-- Fix race condition if PrologFlags=Alloc,NoHold is used.
-- Cray - Make NPC only limit running other NPC jobs on shared blades instead
of limited non NPC jobs.
-- Fix for sbatch #PBS -m (mail) option parsing.
-- Fix job dependency bug. Jobs dependent upon multiple other jobs may start
prematurely.
-- Set "Reason" field for all elements of a job array on short-circuited
scheduling for job arrays.
-- Allow -D option of salloc/srun/sbatch to specify relative path.
-- Added SchedulerParameter of batch_sched_delay to permit many batch jobs
to be submitted between each scheduling attempt to reduce overhead of
scheduling logic.
-- Added job reason of "SchedTimeout" if the scheduler was not able to reach
the job to attempt scheduling it.
-- Add job's exit state and exit code to email message.
-- scontrol hold/release accepts job name option (in addition to job ID).
-- Handle when trying to cancel a step that hasn't started yet better.
-- Add --priority option to salloc, sbatch and srun commands.
-- Honor partition priorities over job priorities.
-- Fix sacct -c when using jobcomp/filetxt to read newer variables
-- Fix segfault of sacct -c if spaces are in the variables.
-- Release held job only with "scontrol release <jobid>" and not by resetting
the job's priority. This is needed to support job arrays better.
-- Correct squeue command not to merge jobs with state pending and completing
together.
-- Fix issue where user is requesting --acctg-freq=0 and no memory limits.
-- Fix issue with GrpCPURunMins if a job's timelimit is altered while the job
is running.
-- Temporary fix for handling our typemap for the perl api with newer perl.
-- Fix allowgroup on bad group seg fault with the controller.
-- Handle node ranges better when dealing with accounting max node limits.
* Changes in Slurm 14.03.1-2
-- Update configure to set correct version without having to run autogen.sh
* Changes in Slurm 14.03.1
==========================
-- Add support for job std_in, std_out and std_err fields in Perl API.
-- Add "Scheduling Configuration Guide" web page.
-- BGQ - fix check for jobinfo when it is NULL
-- Do not check cleaning on "pending" steps.
-- task/cgroup plugin - Fix for building on older hwloc (v1.0.2).
-- In the PMI implementation by default don't check for duplicate keys.
Set the SLURM_PMI_KVS_DUP_KEYS if you want the code to check for
duplicate keys.
-- Permit user root to propagate resource limits higher than the hard limit
slurmd has on that compute node has (i.e. raise both current and maximum
limits).
-- Fix issue with license used count when doing an scontrol reconfig.
-- Fix the PMI iterator to not report duplicated keys.
-- Fix issue with sinfo when -o is used without the %P option.
-- Rather than immediately invoking an execution of the scheduling logic on
every event type that can enable the execution of a new job, queue its
execution. This permits faster execution of some operations, such as
modifying large counts of jobs, by executing the scheduling logic less
frequently, but still in a timely fashion.
-- If the environment variable is greater than MAX_ENV_STRLEN don't
set it in the job env otherwise the exec() fails.
-- Optimize scontrol hold/release logic for job arrays.
-- Modify srun to report an exit code of zero rather than nine if some tasks
exit with a return code of zero and others are killed with SIGKILL. Only an
exit code of zero did this.
-- Avoid slurmctld crash getting job info if detail_ptr is NULL.
-- Fix sacctmgr add user where both defaultaccount and accounts are specified.
-- Added SchedulerParameters option of max_sched_time to limit how long the
main scheduling loop can execute for.
-- Added SchedulerParameters option of sched_interval to control how frequently
the main scheduling loop will execute.
-- Move start time of main scheduling loop timeout after locks are aquired.
-- Add squeue job format option of "%y" to print a job's nice value.
-- Update scontrol update jobID logic to operate on entire job arrays.
-- Fix PrologFlags=Alloc to run the prolog on each of the nodes in the
allocation instead of just the first.
-- Fix race condition if a step is starting while the slurmd is being
restarted.
-- Make sure a job's prolog has ran before starting a step.
-- BGQ - Fix invalid memory read when using DefaultConnType in the
bluegene.conf
-- Make sure we send node state to the DBD on clean start of controller.
-- Fix some sinfo and squeue sorting anomalies due to differences in data
types.
-- Only send message back to slurmctld when PrologFlags=Alloc is used on a
Cray/ALPS system, otherwise use the slurmd to wait on the prolog to gate
the start of the step.
-- Remove need to check PrologFlags=Alloc in slurmd since we can tell if prolog
has ran yet or not.
-- Fix squeue to use a correct macro to check job state.
-- BGQ - Fix incorrect logic issues if MaxBlockInError=0 in the bluegene.conf.
-- priority/basic - Insure job priorities continue to decrease when jobs are
submitted with the --nice option.
-- Make the PrologFlag=Alloc work on batch scripts
-- Make PrologFlag=NoHold (automatically sets PrologFlag=Alloc) not hold in
salloc/srun, instead wait in the slurmd when a step hits a node and the
prolog is still running.
-- Added --cpu-freq=highm1 (high minus one) option.
-- Expand StdIn/Out/Err string length output by "scontrol show job" from 128
to 1024 bytes.
-- squeue %F format will now print the job ID for non-array jobs.
-- Use quicksort for all priority based job sorting, which improves performance
significantly with large job counts.
-- If a job has already been released from a held state ignore successive
release requests.
-- Fix srun/salloc/sbatch man pages for the --no-kill option.
-- Add squeue -L/--licenses option to filter jobs by license names.
-- Handle abort job on node on front end systems without core dumping.
-- Fix dependency support for job arrays.
-- When updating jobs verify the update request is not identical to
the current settings.
-- When sorting jobs and priorities are equal sort by job_id.
-- Do not overwrite existing reason for node being down or drained.
-- Requeue batch job if Munge is down and credential can not be created.
-- Make _slurm_init_msg_engine() tolerate bug in bind() returning a busy
ephemeral port.
-- Don't block scheduling of entire job array if it could run in multiple
partitions.
-- Introduce a new debug flag Protocol to print protocol requests received
together with the remote IP address and port.
-- CRAY - Set up the network even when only using 1 node.
-- CRAY - Greatly reduce the number of error messages produced from the task
plugin and provide more information in the message.
* Changes in Slurm 14.03.0
==========================
-- job_submit/lua: Fix invalid memory reference if script returns error message
for user.
-- Add logic to sleep and retry if slurm.conf can't be read.
-- Reset a node's CpuLoad value at least once each SlurmdTimeout seconds.
-- Scheduler enhancements for reservations: When a job needs to run in
reservation, but can not due to busy resources, then do not block all jobs
in that partition from being scheduled, but only the jobs in that
reservation.
-- Export "SLURM*" environment variables from sbatch even if --export=NONE.
-- When recovering node state if the Slurm version is 2.6 or 2.5 set the
protocol version to be SLURM_2_5_PROTOCOL_VERSION which is the minimum
supported version.
-- Update the scancel man page documenting the -s option.
-- Update sacctmgr man page documenting how to modify account's QOS.
-- Fix for sjstat which currently does not print >1TB memory values correctly.
-- Change xmalloc()/xfree() to malloc()/free() in hostlist.c for better
performance.
-- Update squeue.1 man page describing the SPECIAL_EXIT state.
-- Added scontrol option of errnumstr to return error message given a slurm
error number.
-- If srun invoked with the --multi-prog option, but no task count, then use
the task count provided in the MPMD configuration file.
-- Prevent sview abort on some systems when adding or removing columns to the
display for nodes, jobs, partitions, etc.
-- Add job array hash table for improved performance.
-- Make AccountingStorageEnforce=all not include nojobs or nosteps.
-- Added sacctmgr mod qos set RawUsage=0.
-- Modify hostlist functions to accept more than two numeric ranges (e.g.
"row[1-3]rack[0-8]slot[0-63]")
-- Run job scheduling logic immediately when nodes enter service.
-- Added sbatch '--parsable' option to output only the job id number and the
cluster name separated by a semicolon. Errors will still be displayed.
-- Added failure management "slurmctld/nonstop" plugin.
-- Prevent jobs being killed when a checkpoint plugin is enabled or disabled.
-- Update the documentation about SLURM_PMI_KVS_NO_DUP_KEYS environment
variable.
-- select/cons_res bug fix for range of node counts with --cpus-per-task
option (e.g. "srun -N2-3 -c2 hostname" would allocate 2 CPUs on the first
node and 0 CPUs on the second node).
-- Change reservation flags field from 16 to 32-bits.
-- Add reservation flag value of "FIRST_CORES".
-- Added the idea of Resources to the database. Framework for handling
license servers outside of Slurm.
-- When starting the slurmctld only send past job/node state information to
accounting if running for the first time (should speed up startup
dramatically on systems with lots of nodes or lots of jobs).
-- Make job array expressions more flexible to accept multiple step counts in
the expression (e.g. "--array=1-10:2,50-60:5,123").
-- switch/cray - add state save/restore logic tracking allocated ports.
-- SchedulerParameters - Replace max_job_bf with bf_max_job_start (both will
work for now).
-- Add SchedulerParameters options of preempt_reorder_count and
preempt_strict_order.
-- Make memory types in acct_gather uint64_t to handle systems with more than
4TB of memory on them.
-- BGQ - --export=NONE option for srun to make it so only the SLURM_JOB_ID
and SLURM_STEP_ID env vars are set.
-- Munge plugins - Add sleep between retries if can't connect to socket.
-- Added DebugFlags value of "License".
-- Added --enable-developer which will give you -Werror when compiling.
-- Fix for job request with GRES count of zero.
-- Job array dependency logic: Cache results for major performance improvement.
-- Modify squeue to support filter on job states Special_Exit and Resizing.
-- Defer purging job record until after EpilogSlurmctld completes.
-- Fix handling RPCs from a 14.03 slurmctld to a 2.6 slurmd
* Changes in Slurm 14.03.0pre6
==============================
-- Modify slurmstepd to log messages according to the LogTimeFormat
parameter in slurm.conf.
-- Insure that overlapping reservations do not oversubscribe available
licenses.
-- Added core specialization logic to select/cons_res plugin.
-- Added whole_node field to job_resources structure and enable gang scheduling
for jobs with core specialization.
-- When using FastSchedule = 1 the nodes with less than configured resources
are not longer set DOWN, they are set to DRAIN instead.
-- Modified 'sacctmgr show associations' command to show GrpCPURunMins
by default.
-- Replace the hostlist_push() function with a more efficient
hostlist_push_host().
-- Modify the reading of lustre file system statistics to print more
information when debug and when io error occur.
-- Add specialized core count field to job credential data.
NOTE: This changes the communications protocol from other pre-releases of
version 14.03. All programs must be cancelled and daemons upgraded from
previous pre-releases of version 14.03. Upgrades from version 2.6 or earlier
can take place without loss of jobs
-- Add version number to node and front-end configuration information visible
using the scontrol tool.
-- Add idea of a RESERVED flag for node state so idle resources are marked
not "idle" when in a reservation.
-- Added core specialization plugin infrastructure.
-- Added new job_submit/trottle plugin to control the rate at which a user
can submit jobs.
-- CRAY - added network performance counters option.
-- Allow scontrol suspend/resume to accept jobid in the format jobid_taskid
to suspend/resume array elements.
-- In the slurmctld job record, split "shared" variable into "share_res" (share
resource) and "whole_node" fields.
-- Fix the format of SLURM_STEP_RESV_PORTS. It was generated incorrectly
when using the hostlist_push_host function and input surrounded by [].
-- Modify the srun --slurmd-debug option to accept debug string tags
(quiet, fatal, error, info verbose) beside the numerical values.
-- Fix the bug where --cpu_bind=map_cpu is interpreted as mask_cpu.
-- Update the documentation egarding the state of cpu frequencies after
a step using --cpu-freq completes.
-- CRAY - Fix issue when a job is requeued and nhc is still running as it is
being scheduled to run again. This would erase the previous job info
that was still needed to clean up the nodes from the previous job run.
(Bug 526).
-- Set SLURM_JOB_PARTITION environment variable set for all job allocations.
-- Set SLURM_JOB_PARTITION environment variable for Prolog program.
-- Added SchedulerParameters option of partition_job_depth to limit scheduling
logic depth by partition.
-- Handle the case in which errno is not reset to 0 after calling
getgrent_r(), which causes the controller to core dump.
-- Added squeue format option of "%X" (core specialization count).
-- Added core specialization web page (just a start for now).
-- Added the SLURM_ARRAY_JOB_ID and SLURM_ARRAY_TASK_ID
-- Fix bug in job step allocation failing due to memory limit.
-- Modify the pbsnodes script to reflect its output on a TORQUE system.
-- Add ability to clear a node's DRAIN flag using scontrol or sview by setting
it's state to "UNDRAIN". The node's base state (e.g. "DOWN" or "IDLE") will
not be changed.
-- Modify the output of 'scontrol show partition' by displaying
DefMemPerCPU=UNLIMITED and MaxMemPerCPU=UNLIMITED when these limits are
configured as 0.
-- mpirun-mic - Major re-write of the command wrapper for Xeon Phi use.
-- Add new configuration parameter of AuthInfo to specify port used by
authentication plugin.
-- Fixed conditional RPM compiling.
-- Corrected slurmstepd ident name when logging to syslog.
-- Fixed sh5util loop when there are no node-step files.
-- Add SLURM_CLUSTER_NAME to environment variables passed to PrologSlurmctld,
Prolog, EpilogSlurmctld, and Epilog
-- Add the idea of running a prolog right when an allocation happens
instead of when running on the node for the first time.
-- If user runs 'scontrol reconfig' but hostnames or the host count changes
the slurmctld throws a fatal error.
-- gres.conf - Add "NodeName" specification so that a single gres.conf file
can be used for a heterogeneous cluster.
-- Add flag to accounting RPC to indicate if job data is packed or not.
-- After all srun tasks have terminated on a node close the stdout/stderr
channel with the slurmstepd on that node.
-- In case of i/o error with slurmstepd log an error message and abort the
job.
-- Add --test-only option to sbatch command to validate the script and options.
The response includes expected start time and resources to be allocated.
==============================
-- Remove the ThreadID documentation from slurm.conf. This functionality has
been obsoleted by the LogTimeFormat.
-- Sched plugins - rename global and plugin functions names for consistency
with other plugin types.
-- BGQ - Added RebootQOSList option to bluegene.conf to allow an implicate
reboot of a block if only jobs in the list are running on it when cnodes
go into a failure state.
-- Correct task count of pending job steps.
-- Improve limit enforcement for jobs, set RLIMIT_RSS, RLIMIT_AS and/or
RLIMIT_DATA to enforce memory limit.
-- Pending job steps will have step_id of INFINITE rather than NO_VAL and
will be reported as "TBD" by scontrol and squeue commands.
-- Add logic so PMI_Abort or PMI2_Abort can propagate an exit code.
-- Added SlurmdPlugstack configuration parameter.
-- Added PriorityFlag DEPTH_OBLIVIOUS to have the depth of an association
not effect it's priorty.
-- Multi-thread the sinfo command (one thread per partition).
-- Added sgather tool to gather files from a job's compute nodes into a
central location.
-- Added configuration parameter FairShareDampeningFactor to offer a greater
priority range based upon utilization.
-- Change MaxArraySize and job's array_task_id from 16-bit to 32-bit field.
Additional Slurm enhancements are be required to support larger job arrays.
-- Added -S/--core-spec option to salloc, sbatch and srun commands to reserve
specialized cores for system use. Modify scontrol and sview to get/set
the new field. No enforcement exists yet for these new options.
struct job_info / slurm_job_info_t: Added core_spec
struct job_descriptorjob_desc_msg_t: Added core_spec
-- Do not set SLURM_NODEID environment variable on front-end systems.
-- Convert bitmap functions to use int32_t instead of int in data structures
and function arguments. This is to reliably enable use of bitmaps containing
up to 4 billion elements. Several data structures containing index values
were also changed from data type int to int32_t:
- Struct job_info / slurm_job_info_t: Changed exc_node_inx, node_inx, and
req_node_inx from type int to type int32_t
- job_step_info_t: Changed node_inx from type int to type int32_t
- Struct partition_info / partition_info_t: Changed node_inx from type int
to type int32_t
- block_job_info_t: Changed cnode_inx from type int to type int32_t
- block_info_t: Changed ionode_inx and mp_inx from type int to type int32_t
- Struct reserve_info / reserve_info_t: Changed node_inx from type int to
type int32_t
-- Modify qsub wrapper output to match torque command output, just print the
job ID rather than "Submitted batch job #"
-- Change Slurm error string for ESLURM_MISSING_TIME_LIMIT from
"Missing time limit" to
"Time limit specification required, but not provided"
-- Change salloc job_allocate error message header from
"Failed to allocate resources" to
"Job submit/allocate failed"
-- Modify slurmctld message retry logic to support Cray cold-standby SDB.
-- Added "JobAcctGatherParams" configuration parameter. Value of "NoShare"
disables accounting for shared memory.
-- Added fields to "scontrol show job" output: boards_per_node,
sockets_per_board, ntasks_per_node, ntasks_per_board, ntasks_per_socket,
ntasks_per_core, and nice.
-- Add squeue output format options for job command and working directory
(%o and %Z respectively).
-- Add stdin/out/err to sview job output.
-- Add new job_state of JOB_BOOT_FAIL for job terminations due to failure to
boot it's allocated nodes or BlueGene block.
-- CRAY - Add SelectTypeParameters NHC_NO_STEPS and NHC_NO which will disable
the node health check script for steps and allocations respectfully.
-- Reservation with CoreCnt: Avoid possible invalid memory reference.
-- Add new error code for attempt to create a reservation with duplicate name.
-- Validate that a hostlist file contains text (i.e. not a binary).
-- switch/generic - propagate switch information from srun down to slurmd and
slurmstepd.
-- CRAY - Do not package Slurm's libpmi or libpmi2 libraries. The Cray version
of those libraries must be used.
-- Added a new option to the scontrol command to view licenses that are
configured in use and avalable. 'scontrol show licenses'.
-- MySQL - Made Slurm compatible with 5.6
==============================
-- Add task pointer to the task_post_term() function in task plugins. The
terminating task's PID is available in task->pid.
-- Defer sending SIGKILL signal to processes while core dump in progress.
-- Added JobContainerPlugin configuration parameter and plugin infrastructure.
-- Added partition configuration parameters AllowAccounts, AllowQOS,
DenyAccounts and DenyQOS.
-- The rpmbuild option for a cray system with ALPS has changed from
%_with_cray to %_with_cray_alps.
-- The log file timestamp format can now be selected at runtime via the
LogTimeFormat configuration option. See the slurm.conf and slurmdbd.conf
man pages for details.
-- Added switch/generic plugin to a job's convey network topology.
-- BLUEGENE - If block is in 'D' state or has more cnodes in error than
MaxBlockInError set the job wait reason appropriately.
-- API use: Generate an error return rather than fatal error and exit if the
configuraiton file is absent or invalid. This will permit Slurm APIs to be
more reliably used by other programs.
-- Add support for load-based scheduling, allocate jobs to nodes with the
largest number of available CPUs. Added SchedulingParameters paramter of
"CR_LLN" and partition parameter of "LLN=yes|no".
-- Added job_info() and step_info() functions to the gres plugins to extract
plugin specific fields from the job's or step's GRES data structure.
-- Added sbatch --signal option of "B:" to signal the batch shell rather than
only the spawned job steps.
-- Added sinfo and squeue format option of "%all" to print all fields available
for the data type with a vertical bar separating each field.
-- Add mechanism for job_submit plugin to generate error message for srun,
salloc or sbatch to stderr. New argument added to job_submit function in
the plugin.
-- Add StdIn, StdOut, and StdErr paths to job information dumped with
"scontrol show job".
-- Permit Slurm administrator to submit a batch job as any user.
-- Set a job's RLIMIT_AS limit based upon it's memory limit and VsizeFactor
configuration value.
-- Remove Postgres plugins
-- Make jobacct_gather/cgroup work correctly and also make all jobacct_gather
plugins more maintainable.
-- Proctrack/pgid - Add support for proctrack_p_plugin_get_pids() function.
-- Sched/backfill - Change default max_job_bf parameter from 50 to 100.
-- Added -I|--item-extract option to sh5util to extract data item from series.
* Changes in Slurm 2.6.10
=========================
-- Switch/nrt - On switch resource allocation failure, free partial allocation.
-- Switch/nrt - Properly track usage of CAU and RDMA resources with multiple
tasks per compute node.
-- Fix issue where user is requesting --acctg-freq=0 and no memory limits.
-- BGQ - Temp fix issue where job could be left on job_list after it finished.
-- BGQ - Fix issue where limits were checked on midplane counts instead of
cnode counts.
-- BGQ - Move code to only start job on a block after limits are checked.
-- Handle node ranges better when dealing with accounting max node limits.
-- Fix perlapi to compile correctly with perl 5.18
-- BGQ - Fix issue with uninitialized variable.
-- Correct sinfo --sort fields to match documentation: E => Reason,
H -> Reason Time (new), R -> Partition Name, u/U -> Reason user (new)
-- If an invalid assoc_ptr comes in don't use the id to verify it.
-- Sched/backfill modified to avoid using nodes in completing state.
-- Correct support for job --profile=none option and related documentation.
-- Properly enforce job --requeue and --norequeue options.
-- If a job --mem-per-cpu limit exceeds the partition or system limit, then
scale the job's memory limit and CPUs per task to satisfy the limit.
-- Correct logic to support Power7 processor with 1 or 2 threads per core
(CPU IDs are not consecutive).
* Changes in Slurm 2.6.9
========================
-- Fix sinfo to work correctly with draining/mixed nodes as well as filtering
on Mixed state.
-- Fix sacctmgr update user with no "where" condition.
-- Fix logic bugs for SchedulerParameters option of max_rpc_cnt.
* Changes in Slurm 2.6.8
========================
-- Add support for Torque/PBS job array options and environment variables.
-- Fix issue where jobs still pending after a reservation would remain
in waiting reason ReqNodeNotAvail.
-- Update last_job_update when a job's state_reason was modified.
-- Free job_ptr->state_desc where ever state_reason is set.
-- Fixed sacct.1 and srun.1 manual pages which contains a hyphen where
a minus sign for options was intended.
-- sinfo - Make sure if partition name is long and the default the last char
doesn't get chopped off.
-- task/affinity - Protect against zero divide when simulating more hardware
than you really have.
-- NRT - Fix issue with 1 node jobs. It turns out the network does need to
be setup for 1 node jobs.
-- Fix recovery of job dependency on task of job array when slurmctld restarts.
-- mysql - Fix invalid memory reference.
-- Lock the /cgroup/freezer subsystem when creating files for tracking processes.
-- Fix preempt/partition_prio to avoid preempting jobs in partitions with
PreemptMode=OFF
-- launch/poe - Implicitly set --network in job step create request as needed.
-- Permit multiple batch job submissions to be made for each run of the
scheduler logic if the job submissions occur at the nearly same time.
-- Fix issue where associations weren't correct if backup takes control and
new associations were added since it was started.
-- Fix race condition is corner case with backup slurmctld.
-- With the backup slurmctld make sure we reinit beginning values in the
slurmdbd plugin.
-- Fix sinfo to work correctly with draining/mixed nodes.
-- MySQL - Fix it so a lock isn't held unnecessarily.
-- Added new SchedulerParameters option of max_rpc_cnt when too many RPCs
are active.
-- BGQ - Fix deny_pass to work correctly.
-- BGQ - Fix sub block steps using a block when the block has passthrough's
in it.
* Changes in Slurm 2.6.7
========================
-- Properly enforce a job's cpus-per-task option when a job's allocation is
constrained on some nodes by the mem-per-cpu option.
-- Correct the slurm.conf man pages and checkpoint_blcr.html page
describing that jobs must be drained from cluster before deploying
-- Fix issue where if using munge and munge wasn't running and a slurmd
needed to forward a message, the slurmd would core dump.
-- Update srun.1 man page documenting the PMI2 support.
-- Fix slurmctld core dump when a jobs gets its QOS updated but there
is not a corresponding association.
-- If a job requires specific nodes and can not run due to those nodes being
busy, the main scheduling loop will block those specific nodes rather than
the entire queue/partition.
-- Fix minor memory leak when updating a job's name.
-- Fix minor memory leak when updating a reservation on a partition using "ALL"
nodes.
-- Fix minor memory leak when adding a reservation with a nodelist and core
count.
-- Update sacct man page description of job states.
-- BGQ - Fix minor memory leak when selecting blocks that can't immediately be
placed.
-- Fixed minor memory leak in backfill scheduler.
-- MYSQL - Fixed memory leak when querying clusters.
-- MYSQL - Fix when updating QOS on an association.
-- NRT - Fix to supply correct error messages to poe/pmd when a launch fails.
-- Add SLURM_STEP_ID to Prolog environment.
-- Add support for SchedulerParameters value of bf_max_job_start that limits
the total number of jobs that can be started in a single iteration of the
backfill scheduler.
-- Don't print negative number when dealing with large memory sizes with
sacct.
-- Fix sinfo output so that host in state allocated and mixed will not be
merged together.
-- GRES: Avoid crash if GRES configurations is inconstent.
-- Make S_SLURM_RESTART_COUNT item available to SPANK.
-- Munge plugins - Add sleep between retries if can't connect to socket.
-- Fix the database query to return all pending jobs in a given time interval.
-- switch/nrt - Correct logic to get dynamic window count.
-- Remove need to use job->ctx_params in the launch plugin, just to simplify
code.
-- NRT - Fix possible memory leak if using multiple adapters.
-- NRT - Fix issue where there are more than NRT_MAXADAPTERS on a system.
-- NRT - Increase Max number of adapters from 8 -> 9
-- NRT - Initialize missing variables when the PMD is starting a job.
-- NRT - Fix issue where we are launching hosts out of numerical order,
this would cause pmd's to hang.
-- NRT - Change xmalloc's to malloc just to be safe.
-- NRT - Sanity check to make sure a jobinfo is there before packing.
-- Add missing options to the print of TaskPluginParam.
-- Fix a couple of issues with scontrol reconfig and adding nodes to
slurm.conf. Rebooting daemons after adding nodes to the slurm.conf
is highly recommended.
* Changes in Slurm 2.6.6
========================
-- sched/backfill - Fix bug that could result in failing to reserve resources
for high priority jobs.
-- Correct job RunTime if requeued from suspended state.
-- Reset job priority from zero (held) on manual resume from suspend state.
-- If FastSchedule=0 then do not DOWN a node with low memory or disk size.
-- Update sshare.1 man page making it consistent with sacctmgr.1.
-- Do not reset a job's priority when the slurmctld restarts if previously
set to some specific value.
-- sview - Fix regression where the Node tab wasn't able to add/remove columns.
-- Fix slurmstepd lock when job terminates inside the infiniband
network traffic accounting plugin.
-- Correct the documentation to read filesystem instead of Lustre. Update
the srun help.
-- Fix the acct_gather_filesystem_lustre.c to compute the Lustre accounting
data correctly accumulating differences between sampling intervals.
Fix the data structure mismatch between acct_gather_filesystem_lustre.c
and slurm_jobacct_gather.h which caused the hdf5 plugin to log incorrect
data.
-- Don't allow PMI_TIME to be zero which will cause floating exception.
-- Fix purging of old reservation errors in database.
-- MYSQL - If starting the plugin and the database isn't up attempt to
connect in a loop instead of producing a fatal.
-- BLUEGENE - If IONodesPerMP changes in bluegene.conf recalculate bitmaps
based on ionode count correctly on slurmctld restart.
-- Fix step allocation when some CPUs are not available due to memory limits.
This happens when one step is active and using memory that blocks the
scheduling of another step on a portion of the CPUs needed. The new step
is now delayed rather than aborting with "Requested node configuration is
not available".
-- Make sure node limits get assessed if no node count was given in request.
-- Removed obsolete slurm_terminate_job() API.
-- Update documentation about QOS limits
-- Retry task exit message from slurmstepd to srun on message timeout.
-- Correction to logic reserving all nodes in a specified partition.
-- Added support for selecting AMD GPU by setting GPU_DEVICE_ORDINAL env var.
-- Properly enforce GrpSubmit limit for job arrays.
-- CRAY - fix issue with using CR_ONE_TASK_PER_CORE
-- CRAY - fix memory leak when using accelerators
* Changes in Slurm 2.6.5
========================
-- Correction to hostlist parsing bug introduced in v2.6.4 for hostlists with
more than one numeric range in brackets (e.g. rack[0-3]_blade[0-63]").
-- Add notification if using proctrack/cgroup and task/cgroup when oom hits.
-- Corrections to advanced reservation logic with overlapping jobs.
-- job_submit/lua - add cpus_per_task field to those available.
-- Add cpu_load to the node information available using the Perl API.
-- Correct a job's GRES allocation data in accounting records for non-Cray
systems.
-- Substantial performance improvement for systems with Shared=YES or FORCE
and large numbers of running jobs (replace bubble sort with quick sort).
-- proctrack/cgroup - Add locking to prevent race condition where one job step
is ending for a user or job at the same time another job stepsis starting
and the user or job container is deleted from under the starting job step.
-- Fixed sh5util loop when there are no node-step files.
-- Fix race condition on batch job termination that could result in a job exit
code of 0xfffffffe if the slurmd on node zero registers its active jobs at
the same time that slurmstepd is recording the job's exit code.
-- Correct logic returning remaining job dependencies in job information
reported by scontrol and squeue. Eliminates vestigial descriptors with
no job ID values (e.g. "afterany").
-- Improve performance of REQUEST_JOB_INFO_SINGLE RPC by removing unnecessary
locks and use hash function to find the desired job.
-- jobcomp/filetxt - Reopen the file when slurmctld daemon is reconfigured
or gets SIGHUP.
-- Remove notice of CVE with very old/deprecated versions of Slurm in
news.html.
-- Fix if hwloc_get_nbobjs_by_type() returns zero core count (set to 1).
-- Added ApbasilTimeout parameter to the cray.conf configuration file.
-- Handle in the API if parts of the node structure are NULL.
-- Fix srun hang when IO fails to start at launch.
-- Fix for GRES bitmap not matching the GRES count resulting in abort
(requires manual resetting of GRES count, changes to gres.conf file,
and slurmd restarts).
-- Modify sview to better support job arrays.
-- Modify squeue to support longer job ID values (for many job array tasks).
-- Fix race condition in authentication credential creation that could corrupt
memory. (NOTE: This race condition has existed since 2003 and would be
exceedingly rare.)
-- Slurmstepd variable initialization - Without this patch, free() is called
on a random memory location (i.e. whatever is on the stack), which can
result in slurmstepd dying and a completed job not being purged in a
timely fashion.
-- Fix slurmstepd race condition when separate threads are reading and
modifying the job's environment, which can result in the slurmstepd failing
with an invalid memory reference.
-- Fix erroneous error messages when running gang scheduling.
-- Fix minor memory leak.
-- scontrol modified to suspend, resume, hold, uhold, or release multiple
jobs in a space separated list.
-- Minor debug error when a connection goes away at the end of a job.
-- Validate return code from calls to slurm_get_peer_addr
-- BGQ - Fix issues with making sure all cnodes are accounted for when mulitple
steps cause multiple cnodes in one allocation to go into error at the
same time.
-- scontrol show job - Correct NumNodes value calculated based upon job
specifications.
-- BGQ - Fix issue if user runs multiple sub-block jobs inside a multiple
midplane block that starts on a higher coordinate than it ends (i.e if a
block has midplanes [0010,0013] 0013 is the start even though it is
listed second in the hostlist).
-- BGQ - Add midplane to the total_cnodes used in the runjob_mux plugin
for better debug.
-- Update AllocNodes paragraph in slurm.conf.5.
* Changes in Slurm 2.6.4
========================
-- Honor ntasks-per-node option with exclusive node allocations.
-- sched/backfill - Prevent invalid memory reference if bf_continue option is
configured and slurm is reconfigured during one of the sleep cycles or if
there are any changes to the partition configuration or if the normal
scheduler runs and starts a job that the backfill scheduler is actively
working on.
-- Update man pages information about acct-freq and JobAcctGatherFrequency
to reflect only the latest supported format.
-- Minor document update to include note about PrivateData=Usage for the
slurm.conf when using the DBD.
-- Expand information reported with DebugFlags=backfill.
-- Initiate jobs pending to run in a reservation as soon as the reservation
becomes active.
-- Purged expired reservation even if it has pending jobs.
-- Corrections to calculation of a pending job's expected start time.
-- Remove some vestigial logic treating job priority of 1 as a special case.
-- Memory freeing up to avoid minor memory leaks at close of daemons
-- Updated documentation to give correct units being displayed.
-- Report AccountingStorageBackupHost with "scontrol show config".
-- init scripts ignore quotes around Pid file name specifications.
-- Fixed typo about command case in quickstart.html.
-- task/cgroup - handle new cpuset files, similar to commit c4223940.
-- Replace the tempname() function call with mkstemp().
-- Fix for --cpu_bind=map_cpu/mask_cpu/map_ldom/mask_ldom plus
--mem_bind=map_mem/mask_mem options, broken in 2.6.2.
-- Restore default behavior of allocating cores to jobs on a cyclic basis
across the sockets unless SelectTypeParameters=CR_CORE_DEFAULT_DIST_BLOCK
or user specifies other distribution options.
-- Enforce JobRequeue configuration parameter on node failure. Previously
always requeued the job.
-- acct_gather_energy/ipmi - Add delay before retry on read error.
-- select/cons_res with GRES and multiple threads per core, fix possible
infinite loop.
-- proctrack/cgroup - Add cgroup create retry logic in case one step is
starting at the same time as another step is ending and the logic to create
and delete cgroups overlaps.
-- Improve setting of job wait "Reason" field.
-- Correct sbatch documentation and job_submit/pbs plugin "%j" is job ID,
not "%J" (which is job_id.step_id).
-- Improvements to sinfo performance, especially for large numbers of
partitions.
-- SlurmdDebug - Permit changes to slurmd debug level with "scontrol reconfig"
-- smap - Avoid invalid memory reference with hidden nodes.
-- Fix sacctmgr modify qos set preempt+/-=.
-- BLUEGENE - fix issue where node count wasn't set up correctly when srun
preforms the allocation, regression in 2.6.3.
-- Add support for dependencies of job array elements (e.g.
"sbatch --depend=afterok:123_4 ...") or all elements of a job array (e.g.
"sbatch --depend=afterok:123 ...").
-- Add support for new options in sbatch qsub wrapper:
-W block=true (wait for job completion)
Clear PBS_NODEFILE environment variable
-- Fixed the MaxSubmitJobsPerUser limit in QOS which limited submissions
a job too early.
-- sched/wiki, sched/wiki2 - Fix to work with change logic introduced in
version 2.6.3 preventing Maui/Moab from starting jobs.
-- Updated the QOS limits documentation and man page.
* Changes in Slurm 2.6.3
========================
-- Add support for some new #PBS options in sbatch scripts and qsub wrapper:
-l accelerator=true|false (GPU use)
-l mpiprocs=# (processors per node)
-l naccelerators=# (GPU count)
-l select=# (node count)
-l ncpus=# (task count)
-v key=value (environment variable)
-W depend=opts (job dependencies, including "on" and "before" options)
-W umask=# (set job's umask)
-- Added qalter and qrerun commands to torque package.
-- Corrections to qstat logic: job CPU count and partition time format.
-- Add job_submit/pbs plugin to translate PBS job dependency options to the
extend possible (no support for PBS "before" options) and set some PBS
environment variables.
-- Add spank/pbs plugin to set a bunch of PBS environment variables.
-- Backported sh5util from master to 2.6 as there are some important
bugfixes and the new item extraction feature.
-- select/cons_res - Correct MacCPUsPerNode partition constraint for CR_Socket.
-- scontrol - for setdebugflags command, avoid parsing "-flagname" as an
scontrol command line option.
-- Fix issue with step accounting if a job is requeued.
-- Close file descriptors on exec of prolog, epilog, etc.
-- Fix issue when a user has held a job and then sets the begin time
into the future.
-- Scontrol - Enable changing a job's stdout file.
-- Fix issues where memory or node count of a srun job is altered while the
srun is pending. The step creation would use the old values and possibly
hang srun since the step wouldn't be able to be created in the modified
allocation.
-- Add support for new SchedulerParameters value of "bf_max_job_part", the
maximum depth the backfill scheduler should go in any single partition.
-- acct_gather/infiniband plugin - Correct packets_in/out values.
-- BLUEGENE - Don't ignore a conn-type request from the user.
-- BGQ - Force a request on a Q for a MESH to be a TORUS in a dimension that
can only be a TORUS (1).
-- Change max message length from 100MB to 1GB before generating "Insane
message length" error.
-- sched/backfill - Prevent possible memory corruption due to use of
bf_continue option and long running scheduling cycle (pending jobs could
have been cancelled and purged).
-- CRAY - fix AcceleratorAllocation depth correctly for basil 1.3
-- Created the environment variable SLURM_JOB_NUM_NODES for srun jobs and
updated the srun man page.
-- BLUEGENE/CRAY - Don't set env variables that pertain to a node when Slurm
isn't doing the launching.
-- gres/gpu and gres/mic - Do not treat the existence of an empty gres.conf
file as a fatal error.
-- Fixed for if hours are specified as 0 the time days-0:min specification
is not parsed correctly.
-- Subtract the PMII_COMMANDLEN_SIZE in contribs/pmi2/pmi2_api.c to prevent
certain implementation of snprintf() to segfault.
* Changes in Slurm 2.6.2
========================
-- Fix issue with reconfig and GrpCPURunMins
-- Fix of wrong node/job state problem after reconfig
-- Allow users who are coordinators update their own limits in the accounts
they are coordinators over.
-- BackupController - Make sure we have a connection to the DBD first thing
to avoid it thinking we don't have a cluster name.
-- Correct value of min_nodes returned by loading job information to consider
the job's task count and maximum CPUs per node.
-- If running jobacct_gather/none fix issue on unpacking step completion.
-- Reservation with CoreCnt: Avoid possible invalid memory reference.
-- sjstat - Add man page when generating rpms.
-- Make sure GrpCPURunMins is added when creating a user, account or QOS with
sacctmgr.
-- Fix for invalid memory reference due to multiple free calls caused by
job arrays submitted to multiple partitions.
-- Enforce --ntasks-per-socket=1 job option when allocating by socket.
-- Validate permissions of key directories at slurmctld startup. Report
anything that is world writable.
-- Improve GRES support for CPU topology. Previous logic would pick CPUs then
reject jobs that can not match GRES to the allocated CPUs. New logic first
filters out CPUs that can not use the GRES, next picks CPUs for the job,
and finally picks the GRES that best match those CPUs.
-- Switch/nrt - Prevent invalid memory reference when allocating single adapter
per node of specific adapter type
-- CRAY - Make Slurm work with CLE 5.1.1
-- Fix segfault if submitting to multiple partitions and holding the job.
-- Use MAXPATHLEN instead of the hardcoded value 1024 for maximum file path
lengths.
-- If OverTimeLimit is defined do not declare failed those jobs that ended
in the OverTimeLimit interval.
* Changes in Slurm 2.6.1
========================
-- slurmdbd - Allow job derived ec and comments to be modified by non-root
users.
-- Fix issue with job name being truncated to 24 chars when sending a mail
message.
-- Fix minor issues with spec file, missing files and including files
erroneously on a bluegene system.
-- sacct - fix --name and --partition options when using
accounting_storage/filetxt.
-- squeue - Remove extra whitespace of default printout.
-- BGQ - added head ppcfloor as an include dir when building.
-- BGQ - Better debug messages in runjob_mux plugin.
-- PMI2 Updated the Makefile.am to build a versioned library.
-- CRAY - Fix srun --mem_bind=local option with launch/aprun.
-- PMI2 Corrected buffer size computation in the pmi2_api.c module.
-- GRES accounting data wrong in database: gres_alloc, gres_req, and gres_used
fields were empty if the job was not started immediately.
-- Fix sbatch and srun task count logic when --ntasks-per-node specified,
but no explicit task count.
-- Corrected the hdf5 profile user guide and the acct_gather.conf
documentation.
-- IPMI - Fix Math bug getting new wattage.
-- Corrected the AcctGatherProfileType documentation in slurm.conf
-- Corrected the sh5util program to print the header in the csv file
only once, set the debug messages at debug() level, make the argument
check case insensitive and avoid printing duplicate \n.
-- If cannot collect energy values send message to the controller
to drain the node and log error slurmd log file.
-- Handle complete removal of CPURunMins time at the end of the job instead
of at multifactor poll.
-- sview - Add missing debug_flag options.
-- PGSQL - Notes about Postgres functionality being removed in the next
version of Slurm.
-- MYSQL - fix issue when rolling up usage and events happened when a cluster
was down (slurmctld not running) during that time period.
-- sched/wiki2 - Insure that Moab gets current CPU load information.
-- Prevent infinite loop in parsing configuration if including file containing
one blank line.
-- Fix pack and unpack between 2.6 and 2.5.
-- Fix job state recovery logic in which a job's accounting frequency was
not set. This would result in a value of 65534 seconds being used (the
equivalent of NO_VAL in uint16_t), which could result in the job being
requeued or aborted.
-- Validate a job's accounting frequency at submission time rather than
waiting for it's initiation to possibly fail.
-- Fix CPURunMins if a job is requeued from a failed launch.
-- Fix in accounting_storage/filetxt to correct start times which sometimes
could end up before the job started.
-- Fix issue with potentially referencing past an array in parse_time()
-- CRAY - fix issue with accelerators on a cray when parsing BASIL 1.3 XML.
-- Fix issue with a 2.5 slurmstepd locking up when talking to a 2.6 slurmd.
-- Add argument to priority plugin's priority_p_reconfig function to note
when the association and QOS used_cpu_run_secs field has been reset.
* Changes in Slurm 2.6.0
========================
-- Fix it so bluegene and serial systems don't get warnings over new NODEDATA
enum.
-- When a job is aborted send a message for any tasks that have completed.
-- Correction to memory per CPU calculation on system with threads and
allocating cores or sockets.
-- Requeue batch job if it's node reboots (used to abort the job).
-- Enlarge maximum size of srun's hostlist file.
-- IPMI - Fix first poll to get correct consumed_energy for a step.
-- Correction to job state recovery logic that could result in assert failure.
-- Record partial step accounting record if allocated nodes fail abnormally.
Francois Diakhate
committed
-- Accounting - fix issue where PrivateData=jobs or users could potentially
show information to users that had no associations on the system.
-- Make PrivateData in slurmdbd.conf case insensitive.
-- sacct/sstat - Add format option ConsumedEnergyRaw to print full energy
values.
* Changes in Slurm 2.6.0rc2
===========================
-- HDF5 - Fix issue with Ubuntu where HDF5 development headers are
overwritten by the parallel versions thus making it so we need handle
both cases.
-- ACCT_GATHER - handle suspending correctly for polling threads.
-- Make SLURM_DISTRIBUTION env var hold both types of distribution if
specified.
-- Remove hardcoded /usr/local from slurm.spec.
-- Modify slurmctld locking to improve performance under heavy load with
very large numbers of batch job submissions or job cancellations.
-- sstat - Fix issue where if -j wasn't given allow last argument to be checked
for as the job/step id.
-- IPMI - fix adjustment on poll when using EnergyIPMICalcAdjustment.
* Changes in Slurm 2.6.0rc1
===========================
-- Added helper script for launching symmetric and MIC-only MPI tasks within
SLURM (in contribs/mic/mpirun-mic).
-- Change maximum delay for state save from 2 secs to 5 secs. Make timeout
configurable at build time by defining SAVE_MAX_WAIT.
-- Modify slurmctld data structure locking to interleave read and write
locks rather than always favor write locks over read locks.
-- Added sacct format option of "ALL" to print all fields.
-- Deprecate the SchedulerParameters value of "interval" use "bf_interval"
instead as documented.
-- Add acct_gather_profile/hdf5 to profile jobs with hdf5
-- Added MaxCPUsPerNode partition configuration parameter. This can be
especially useful to schedule systems with GPUs.
-- Permit "scontrol reboot_node" for nodes in MAINT reservation.
-- Added "PriorityFlags" value of "SMALL_RELATIVE_TO_TIME". If set, the job's
size component will be based upon not the job size alone, but the job's
size divided by it's time limit.
Morris Jette
committed
-- Added sbatch option "--ignore-pbs" to ignore "#PBS" options in the batch
script.
-- Rename slurm_step_ctx_params_t field from "mem_per_cpu" to "pn_min_memory".
Job step now accepts memory specification in either per-cpu or per-node
basis.
-- Add ability to specify host repitition count in the srun hostfile (e.g.
"host1*2" is equivalent to "host1,host1").
* Changes in Slurm 2.6.0pre3
============================
-- Add milliseconds to default log message header (both RFC 5424 and ISO 8601
time formats). Disable milliseconds logging using the configure
parameter "--disable-log-time-msec". Default time format changes to
ISO 8601 (without time zone information). Specify "--enable-rfc5424time"
to restore the time zone information.
-- Add username (%u) to the filename pattern in the batch script.
-- Added options for front end nodes of AllowGroups, AllowUsers, DenyGroups,
and DenyUsers.
-- Fix sched/backfill logic to initiate jobs with maximum time limit over the
partition limit, but the minimum time limit permits it to start.
-- gres/gpu - Fix for gres.conf file with multiple files on a single line
using a slurm expression (e.g. "File=/dev/nvidia[0-1]").
-- Replaced ipmi.conf with generic acct_gather.conf file for all acct_gather
plugins. For those doing development to use this follow the model set
forth in the acct_gather_energy_ipmi plugin.
-- Added more options to update a step's information
-- Add DebugFlags=ThreadID which will print the thread id of the calling
thread.
-- CRAY - Allocate whole node (CPUs) in reservation despite what the
user requests. We have found any srun/aprun afterwards will work on a
subset of resources.
-- Do not purge inactive interactive jobs that lack a port to ping (added
for MR+ operation).
-- Advanced reservations with hostname and core counts now supports asymetric
reservations (e.g. specific different core count for each node).
-- Added slurmctld/dynalloc plugin for MapReduce+ support.
-- Added "DynAllocPort" configuration parameter.
-- Added partition paramter of SelectTypeParameters to override system-wide
value.
-- Added cr_type to partition_info data structure.
-- Added allocated memory to node information available (within the existing
select_nodeinfo field of the node_info_t data structure). Added Allocated
Memory to node information displayed by sview and scontrol commands.
-- Make sched/backfill the default scheduling plugin rather than sched/builtin
(FIFO).
Alejandro Lucero Palau
committed
-- Added support for a job having different priorities in different partitions.
-- Added new SchedulerParameters configuration parameter of "bf_continue"
which permits the backfill scheduler to continue considering jobs for
backfill scheduling after yielding locks even if new jobs have been
submitted. This can result in lower priority jobs from being backfill
scheduled instead of newly arrived higher priority jobs, but will permit
more queued jobs to be considered for backfill scheduling.
-- Added support to purge reservation records from accounting.
-- Cray - Add support for Basil 1.3
* Changes in SLURM 2.6.0pre1
============================
-- Add "state" field to job step information reported by scontrol.
-- Notify srun to retry step creation upon completion of other job steps
rather than polling. This results in much faster throughput for job step
execution with --exclusive option.
-- Added "ResvEpilog" and "ResvProlog" configuration parameters to execute a
program at the beginning and end of each reservation.
-- Added "slurm_load_job_user" function. This is a variation of
"slurm_load_jobs", but accepts a user ID argument, potentially resulting
in substantial performance improvement for "squeue --user=ID"
-- Added "slurm_load_node_single" function. This is a variation of
"slurm_load_nodes", but accepts a node name argument, potentially resulting
in substantial performance improvement for "sinfo --nodes=NAME".
-- Added "HealthCheckNodeState" configuration parameter identify node states
on which HealthCheckProgram should be executed.
-- Remove sacct --dump --formatted-dump options which were deprecated in
2.5.
-- Added support for job arrays (phase 1 of effort). See "man sbatch" option
-a/--array for details.
-- Add new AccountStorageEnforce options of 'nojobs' and 'nosteps' which will
allow the use of accounting features like associations, qos and limits but
not keep track of jobs or steps in accounting.
-- Cray - Add new cray.conf parameter of "AlpsEngine" to specify the
communication protocol to be used for ALPS/BASIL.
-- select/cons_res plugin: Correction to CPU allocation count logic in for
cores without hyperthreading.
-- Added new SelectTypeParameter value of "CR_ALLOCATE_FULL_SOCKET".
-- Added PriorityFlags value of "TICKET_BASED" and merged priority/multifactor2
plugin into priority/multifactor plugin.
Morris Jette
committed
-- Add "KeepAliveTime" configuration parameter controlling how long sockets
used for srun/slurmstepd communications are kept alive after disconnect.
-- Added SLURM_SUBMIT_HOST to salloc, sbatch and srun job environment.
-- Added SLURM_ARRAY_TASK_ID to environment of job array.
-- Added squeue --array/-r option to optimize output for job arrays.
-- Added "SlurmctldPlugstack" configuration parameter for generic stack of
slurmctld daemon plugins.
-- Removed contribs/arrayrun tool. Use native support for job arrays.
-- Modify default installation locations for RPMs to match "make install":
_prefix /usr/local
_slurm_sysconfdir %{_prefix}/etc/slurm
_mandir %{_prefix}/share/man
_infodir %{_prefix}/share/info
-- Add acct_gather_energy/ipmi which works off freeipmi for energy gathering
* Changes in Slurm 2.5.8
========================
-- Fix for slurmctld segfault on NULL front-end reason field.
-- Avoid gres step allocation errors when a job shrinks in size due to either
down nodes or explicit resizing. Generated slurmctld errors of this type:
"step_test ... gres_bit_alloc is NULL"
-- Fix bug that would leak memory and over-write the AllowGroups field if on
"scontrol reconfig" when AllowNodes is manually changed using scontrol.
-- Get html/man files to install in correct places with rpms.
-- Remove --program-prefix from spec file since it appears to be added by
default and appeared to break other things.
-- Updated the automake min version in autogen.sh to be correct.
-- Select/cons_res - Correct total CPU count allocated to a job with
--exclusive and --cpus-per-task options
-- switch/nrt - Don't allocate network resources unless job step has 2+ nodes.
-- select/cons_res - Avoid extraneous "oversubscribe" error messages.
-- Reorder get config logic to avoid deadlock.
-- Enforce QOS MaxCPUsMin limit when job submission contains no user-specified
time limit.
-- EpilogSlurmctld pthread is passed required arguments rather than a pointer
to the job record, which under some conditions could be purged and result
in an invalid memory reference.
* Changes in Slurm 2.5.7
========================
-- Fix for linking to the select/cray plugin to not give warning about
undefined variable.
-- Add missing symbols to the xlator.h
-- Avoid placing pending jobs in AdminHold state due to backfill scheduler
interactions with advanced reservation.
-- Accounting - make average by task not cpu.
-- CRAY - Change logging of transient ALPS errors from error() to debug().
-- POE - Correct logic to support poe option "-euidevice sn_all" and
"-euidevice sn_single".
-- Accounting - Fix minor initialization error.
-- POE - Correct logic to support srun network instances count with POE.
-- POE - With the srun --launch-cmd option, report proper task count when
the --cpus-per-task option is used without the --ntasks option.
-- POE - Fix logic binding tasks to CPUs.
-- sview - Fix race condition where new information could of slipped past
the node tab and we didn't notice.
-- Accounting - Fix an invalid memory read when slurmctld sends data about
-- If a prolog or epilog failure occurs, drain the node rather than setting it
down and killing all of its jobs.
-- Priority/multifactor - Avoid underflow in half-life calculation.
-- POE - pack missing variable to allow fanout (more than 32 nodes)
-- Prevent clearing reason field for pending jobs. This bug was introduced in
v2.5.5 (see "Reject job at submit time ...").
-- BGQ - Fix issue with preemption on sub-block jobs where a job would kill
all preemptable jobs on the midplane instead of just the ones it needed to.
-- switch/nrt - Validate dynamic window allocation size.
-- BGQ - When --geo is requested do not impose the default conn_types.
-- RebootNode logic - Defers (rather than forgets) reboot request with job
running on the node within a reservation.
-- switch/nrt - Correct network_id use logic. Correct support for user sn_all
and sn_single options.
-- sched/backfill - Modify logic to reduce overhead under heavy load.
-- Fix job step allocation with --exclusive and --hostlist option.
-- Select/cons_res - Fix bug resulting in error of "cons_res: sync loop not
progressing, holding job #"
-- checkpoint/blcr - Reset max_nodes from zero to NO_VAL on job restart.
-- launch/poe - Fix for hostlist file support with repeated host names.
-- priority/multifactor2 - Prevent possible divide by zero.
-- srun - Don't check for executable if --test-only flag is used.
-- energy - On a single node only use the last task for gathering energy.
Since we don't currently track energy usage per task (only per step).
Otherwise we get double the energy.
-- Gres accounting - Fix regression in 2.5.5 for keeping track of gres
requested and allocated.
* Changes in Slurm 2.5.5
========================
-- Fix for sacctmgr add qos to handle the 'flags' option.
-- Export SLURM_ environment variables from sbatch, even if "--export"
option does not explicitly list them.
-- If node is in more than one partition, correct counting of allocated CPUs.
-- If step requests more CPUs than possible in specified node count of job
allocation then return ESLURM_TOO_MANY_REQUESTED_CPUS rather than
ESLURM_NODES_BUSY and retrying.
-- CRAY - Fix SLURM_TASKS_PER_NODE to be set correctly.
-- Accounting - more checks for strings with a possible `'` in it.
-- sreport - Fix by adding planned down time to utilization reports.
-- Do not report an error when sstat identifies job steps terminated during
its execution, but log using debug type message.
-- Select/cons_res - Permit node removed from job by going down to be returned
to service and re-used by another job.
-- Select/cons_res - Tighter packing of job allocations on sockets.
-- SlurmDBD - fix to allow user root along with the slurm user to register a
cluster.
-- Select/cons_res - Fix for support of consecutive node option.
-- Select/cray - Modify build to enable direct use of libslurm library.
-- Bug fixes related to job step allocation logic.
-- Cray - Disable enforcement of MaxTasksPerNode, which is not applicable
with launch/aprun.
-- Accounting - When rolling up data from past usage ignore "idle" time from
a reservation when it has the "Ignore_Jobs" flag set. Since jobs could run
outside of the reservation in it's nodes without this you could have
double time.
-- Accounting - Minor fix to avoid reuse of variable erroneously.
-- Reject job at submit time if the node count is invalid. Previously such a
job submitted to a DOWN partition would be queued.
-- Purge vestigial job scripts when the slurmd cold starts or slurmstepd
terminates abnormally.
-- Add sanity check for NULL cluster names trying to register.
-- BGQ - Push action 'D' info to scontrol for admins.
-- Reset a job's reason from PartitionDown when the partition is set up.
-- BGQ - Handle issue where blocks would have a pending job on them and
while it was free cnodes would go into software error and kill the job.
-- BGQ - Fix issue where if for some reason we are freeing a block with
a pending job on it we don't kill the job.
-- BGQ - Fix race condition were a job could of been removed from a block
without it still existing there. This is extremely rare.
-- BGQ - Fix for when a step completes in Slurm before the runjob_mux notifies
the slurmctld there were software errors on some nodes.
-- BGQ - Fix issue on state recover if block states are not around
and when reading in state from DB2 we find a block that can't be created.
You can now do a clean start to rid the bad block.
-- Modify slurmdbd to retransmit to slurmctld daemon if it is not responding.
-- BLUEGENE - Fix issue where when doing backfill preemptable jobs were
never looked at to determine eligibility of backfillable job.
-- Cray/BlueGene - Disable srun --pty option unless LaunchType=launch/slurm.
-- CRAY - Fix sanity check for systems with more than 32 cores per node.
-- CRAY - Remove other objects from MySQL query that are available from
the XML.
-- BLUEGENE - Set the geometry of a job when a block is picked and the job
isn't a sub-block job.
-- Cray - avoid check of macro versions of CLE for version 5.0.
-- CRAY - Fix memory issue with reading in the cray.conf file.
-- CRAY - If hostlist is given with srun make sure the node count is the same
as the hosts given.
-- CRAY - If task count specified, but no tasks-per-node, then set the tasks
per node in the BASIL reservation request.
-- CRAY - fix issue with --mem option not giving correct amount of memory
per cpu.
-- CRAY - Fix if srun --mem is given outside an allocation to set the
APRUN_DEFAULT_MEMORY env var for aprun. This scenario will not display
the option when used with --launch-cmd.
-- Change sview to use GMutex instead of GStaticMutex
-- CRAY - set APRUN_DEFAULT_MEMROY instead of CRAY_AUTO_APRUN_OPTIONS
-- sview - fix issue where if a partition was completely in one state the
cpu count would be reflected correctly.
-- BGQ - fix for handling half rack system in STATIC of OVERLAP mode to
implicitly create full system block.
-- CRAY - Dynamically create BASIL XML buffer to resize as needed.
-- Fix checking if QOS limit MaxCPUMinsPJ is set along with DenyOnLimit to
deny the job instead of holding it.
-- Make sure on systems that use a different launcher than launch/slurm not
to attempt to signal tasks on the frontend node.
-- Cray - when a step is requested count other steps running on nodes in the
allocation as taking up the entire node instead of just part of the node
allocated. And always enforce exclusive on a step request.
-- Cray - display correct nodelist, node/cpu count on steps.
* Changes in Slurm 2.5.4
========================
-- Fix bug in PrologSlurmctld use that would block job steps until node
responds.
Danny Auble
committed
-- CRAY - If a partition has MinNodes=0 and a batch job doesn't request nodes
put the allocation to 1 instead of 0 which prevents the allocation to
happen.
-- Better debug when the database is down and using the --cluster option in
the user commands.
-- When asking for job states with sacct, default to 'now' instead of midnight
of the current day.
-- Fix for handling a test-only job or immediate job that fails while being
built.
-- Comment out all of the logic in the job_submit/defaults plugin. The logic
is only an example and not meant for actual use.
-- Eliminate configuration file 4096 character line limitation.
-- More robust logic for tree message forward
-- BGQ - When cnodes fail in a timeout fashion correctly look up parent
midplane.
-- Correct sinfo "%c" (node's CPU count) output value for Bluegene systems.
-- Backfill - Responsive improvements for systems with large numbers of jobs
(>5000) and using the SchedulerParameters option bf_max_job_user.
-- slurmstepd: ensure that IO redirection openings from/to files correctly
handle interruption
-- BGQ - Able to handle when midplanes go into Hardware::SoftwareFailure
-- GRES - Correct tracking of specific resources used after slurmctld restart.
Counts would previously go negative as jobs terminate and decrement from
a base value of zero.
-- Fix for priority/multifactor2 plugin to not assert when configured with
--enable-debug.
-- Select/cons_res - If the job request specified --ntasks-per-socket and the
allocation using is cores, then pack the tasks onto the sockets up to the
specified value.
-- BGQ - If a cnode goes into an 'error' state and the block containing the
cnode does not have a job running on it do not resume the block.
-- BGQ - Handle blocks that don't free themselves in a reasonable time better.
-- BGQ - Fix for signaling steps when allocation ends before step.
-- Fix for backfill scheduling logic with job preemption; starts more jobs.
-- xcgroup - remove bugs with EINTR management in write calls
-- jobacct_gather - fix total values to not always == the max values.
-- Fix for handling node registration messages from older versions without
energy data.
-- BGQ - Allow user to request full dimensional mesh.
-- sdiag command - Correction to jobs started value reported.
-- Prevent slurmctld assert when invalid change to reservation with running
jobs is made.
-- BGQ - If signal is NODE_FAIL allow forward even if job is completing
and timeout in the runjob_mux trying to send in this situation.
-- BGQ - More robust checking for correct node, task, and ntasks-per-node
options in srun, and push that logic to salloc and sbatch.
-- GRES topology bug in core selection logic fixed.
-- Fix to handle init.d script for querying status and not return 1 on
success.
* Changes in SLURM 2.5.3
========================
-- Gres/gpu plugin - If no GPUs requested, set CUDA_VISIBLE_DEVICES=NoDevFiles.
This bug was introduced in 2.5.2 for the case where a GPU count was
configured, but without device files.
-- task/affinity plugin - Fix bug in CPU masks for some processors.
-- Modify sacct command to get format from SACCT_FORMAT environment variable.
-- BGQ - Changed order of library inclusions and fixed incorrect declaration
to compile correctly on newer compilers
-- Fix for not building sview if glib exists on a system but not the gtk libs.
-- BGQ - Fix for handling a job cleanup on a small block if the job has long
since left the system.
-- Fix race condition in job dependency logic which can result in invalid
memory reference.
* Changes in SLURM 2.5.2
========================
-- Fix advanced reservation recovery logic when upgrading from version 2.4.
-- BLUEGENE - fix for QOS/Association node limits.
-- Add missing "safe" flag from print of AccountStorageEnforce option.
-- Fix logic to optimize GRES topology with respect to allocated CPUs.
-- Add job_submit/all_partitions plugin to set a job's default partition
to ALL available partitions in the cluster.
-- Modify switch/nrt logic to permit build without libnrt.so library.
-- Handle srun task launch failure without duplicate error messages or abort.
Matthieu Hautreux
committed
-- Fix bug in QoS limits enforcement when slurmctld restarts and user not yet
added to the QOS list.
-- Fix issue where sjstat and sjobexitmod was installed in 2 different RPMs.
-- Fix for job request of multiple partitions in which some partitions lack
nodes with required features.
-- Permit a job to use a QOS they do not have access to if an administrator
manually set the job's QOS (previously the job would be rejected).
-- Make more variables available to job_submit/lua plugin: slurm.MEM_PER_CPU,
slurm.NO_VAL, etc.
-- Fix topology/tree logic when nodes defined in slurm.conf get re-ordered.
-- In select/cons_res, correct logic to allocate whole sockets to jobs. Work
by Magnus Jonsson, Umea University.
-- In select/cons_res, correct logic when job removed from only some nodes.
-- Avoid apparent kernel bug in 2.6.32 which apparently is solved in
at least 3.5.0. This avoids a stack overflow when running jobs on
more than 120k nodes.
-- BLUEGENE - If we made a block that isn't runnable because of a overlapping
block, destroy it correctly.
-- Switch/nrt - Dynamically load libnrt.so from within the plugin as needed.
This eliminates the need for libnrt.so on the head node.
-- BLUEGENE - Fix in reservation logic that could cause abort.
* Changes in SLURM 2.5.1
========================
-- Correction to hostlist sorting for hostnames that contain two numeric
components and the first numeric component has various sizes (e.g.
"rack9blade1" should come before "rack10blade1")
-- BGQ - Only poll on initialized blocks instead of calling getBlocks on
each block independently.
-- Fix of task/affinity plugin logic for Power7 processors having hyper-
threading disabled (cpu mask has gaps).
-- Fix of job priority ordering with sched/builtin and priority/multifactor.
-- CRAY - Fix for setting up the aprun for a large job (+2000 nodes).
Morris Jette
committed
-- Fix for race condition related to compute node boot resulting in node being
set down with reason of "Node <name> unexpectedly rebooted"
-- RAPL - Fix for handling errors when opening msr files.
-- BGQ - Fix for salloc/sbatch to do the correct allocation when asking for
-N1 -n#.
-- BGQ - in emulation make it so we can pretend to run large jobs (>64k nodes)
-- BLUEGENE - Correct method to update conn_type of a job.
-- BLUEGENE - Fix issue with preemption when needing to preempt multiple jobs
to make one job run.
-- Fixed issue where if an srun dies inside of an allocation abnormally it
would of also killed the allocation.
-- FRONTEND - fixed issue where if a systems nodes weren't defined in the
slurm.conf with NodeAddr's signals going to a step could be handled
incorrectly.
Morris Jette
committed
-- If sched/backfill starts a job with a QOS having NO_RESERVE and not job
time limit, start it with the partition time limit (or one year if the
partition has no time limit) rather than NO_VAL (140 year time limit);
-- Alter hostlist logic to allocate large grid dynamically instead of on
stack.
-- Change RPC version checks to support version 2.5 slurmctld with version 2.4
slurmd daemons.
-- Correct core reservation logic for use with select/serial plugin.
-- Exit scontrol command on stdin EOF.
-- Disable job --exclusive option with select/serial plugin.
* Changes in SLURM 2.5.0
========================
-- Add DenyOnLimit flag for QOS to deny jobs at submission time if they
request resources that reach a 'Max' limit.
-- Permit SlurmUser or operator to change QOS of non-pending jobs (e.g.
running jobs).
-- BGQ - move initial poll to beginning of realtime interaction, which will
also cause it to run if the realtime server ever goes away.
-- Modify sbcast logic to survive slurmd daemon restart while file a
transmission is in progress.
-- Add retry logic to munge encode/decode calls. This is needed if the munge
deamon is under very heavy load (e.g. with 1000 slurmd daemons per compute
node).
-- Add launch and acct_gather_energy plugins to RPMs.
-- Restore support for srun "--mpi=list" option.
-- CRAY - Introduce step accounting for a Cray.
-- Modify srun to abandon I/O 60 seconds after the last task ends. Otherwise
an aborted slurmstepd can cause the srun process to hang indefinitely.
-- ENERGY - RAPL - alter code to close open files (and only open them once
where needed)
-- If the PrologSlurmctld fails, then requeue the job an indefinite number
of times instead of only one time.
-- Added Prolog and Epilog Guide (web page). Based upon work by Jason Sollom,
Cray Inc. and used by permission.
-- Restore gang scheduling functionality. Preemptor was not being scheduled.
Fix for bugzilla #3.
-- Add "cpu_load" to node information. Populate CPULOAD in node information
reported to Moab cluster manager.
-- Preempt jobs only when insufficient idle resources exist to start job,
regardless of the node weight.
-- Added priority/multifactor2 plugin based upon ticket distribution system.
Work by Janne Blomqvist, Aalto University.
-- Add SLURM_NODELIST to environment variables available to Prolog and Epilog.
-- Permit reservations to allow or deny access by account and/or user.
-- Add ReconfigFlags value of KeepPartState. See "man slurm.conf" for details.
-- Modify the task/cgroup plugin adding a task_pre_launch_priv function and
move slurmstepd outside of the step's cgroup. Work by Matthieu Hautreux.
-- Intel MIC processor support added using gres/mic plugin. BIG thanks to
Olli-Pekka Lehto, CSC-IT Center for Science Ltd.
-- Accounting - Change empty jobacctinfo structs to not actually be used
instead of putting 0's into the database we put NO_VALS and have sacct
figure out jobacct_gather wasn't used.
-- Cray - Prevent calling basil_confirm more than once per job using a flag.
-- Fix bug with topology/tree and job with min-max node count. Now try to
get max node count rather than minimizing leaf switches used.
-- Add AccountingStorageEnforce=safe option to provide method to avoid jobs
launching that wouldn't be able to run to completion because of a
GrpCPUMins limit.
-- Add support for RFC 5424 timestamps in logfiles. Disable with configuration
option of "--disable-rfc5424time". By Janne Blomqvist, Aalto University.
-- CRAY - Replace srun.pl with launch/aprun plugin to use srun to wrap the
aprun process instead of a perl script.
-- srun - Rename --runjob-opts to --launcher-opts to be used on systems other
than BGQ.
-- Added new DebugFlags - Energy for AcctGatherEnergy plugins.
-- start deprecation of sacct --dump --fdump
-- BGQ - added --verbose=OFF when srun --quiet is used
-- Added acct_gather_energy/rapl plugin to record power consumption by job.
Work by Yiannis Georgiou, Martin Perry, et. al., Bull
* Changes in SLURM 2.5.0.pre3
=============================
-- Add Google search to all web pages.
-- Add sinfo -T option to print reservation information. Work by Bill Brophy,
Bull.
-- Force slurmd exit after 2 minute wait, even if threads are hung.
-- Change node_req field in struct job_resources from 8 to 32 bits so we can
run more than 256 jobs per node.
-- sched/backfill: Improve accuracy of expected job start with respect to
reservations.
-- sinfo partition field size will be set the the length of the longest
partition name by default.
-- Make it so the parse_time will return a valid 0 if given epoch time and
set errno == ESLURM_INVALID_TIME_VALUE on error instead.
-- Correct srun --no-alloc logic when node count exceeds node list or task
task count is not a multiple of the node count. Work by Hongjia Cao, NUDT.
-- Completed integration with IBM Parallel Environment including POE and IBM's
NRT switch library.
* Changes in SLURM 2.5.0.pre2
=============================
-- When running with multiple slurmd daemons per node, enable specifying a
range of ports on a single line of the node configuration in slurm.conf.
-- Add reservation flag of Part_Nodes to allocate all nodes in a partition to
a reservation and automatically change the reservation when nodes are
added to or removed from the reservation. Based upon work by
Bill Brophy, Bull.
-- Add support for advanced reservation for specific cores rather than whole
nodes. Current limiations: homogeneous cluster, nodes idle when reservation
created, and no more than one reservation per node. Code is still under
development. Work by Alejandro Lucero Palau, et. al, BSC.
-- Add DebugFlag of Switch to log switch plugin details.
-- Correct job node_cnt value in job completion plugin when job fails due to
down node. Previously was too low by one.
-- Add new srun option --cpu-freq to enable user control over the job's CPU
frequency and thus it's power consumption. NOTE: cpu frequency is not
currently preserved for jobs being suspended and later resumed. Work by
Don Albert, Bull.
-- Add node configuration information about "boards" and optimize task
placement on minimum number of boards. Work by Rod Schultz, Bull.
* Changes in SLURM 2.5.0.pre1
=============================
-- Add new output to "scontrol show configuration" of LicensesUsed. Output is
"name:used/total"
-- Changed jobacct_gather plugin infrastructure to be cleaner and easier to
maintain.
-- Change license option count separator from "*" to ":" for consistency with
the gres option (e.g. "--licenses=foo:2 --gres=gpu:2"). The "*" will still
be accepted, but is no longer documented.
-- Permit more than 100 jobs to be scheduled per node (new limit is 250
-- Restructure of srun code to allow outside programs to utilize existing
logic.
* Changes in SLURM 2.4.6
========================
-- Correct WillRun authentication logic when issued for non-job owner.
-- BGQ - Fix to check block for action 'D' if it also has nodes in error.
* Changes in SLURM 2.4.5
========================
-- Cray - On job kill requeust, send SIGCONT, SIGTERM, wait KillWait and send
SIGKILL. Previously just sent SIGKILL to tasks.
-- BGQ - Fix issue when running srun outside of an allocation and only
specifying the number of tasks and not the number of nodes.
-- BGQ - validate correct ntasks_per_node
-- BGQ - when srun -Q is given make runjob be quiet
Morris Jette
committed
-- Modify use of OOM (out of memory protection) for Linux 2.6.36 kernel
or later. NOTE: If you were setting the environment variable
SLURMSTEPD_OOM_ADJ=-17, it should be set to -1000 for Linux 2.6.36 kernel
or later.
-- BGQ - Fix job step timeout actually happen when done from within an
allocation.
-- Reset node MAINT state flag when a reservation's nodes or flags change.
-- Accounting - Fix issue where QOS usage was being zeroed out on a
slurmctld restart.
-- BGQ - Add 64 tasks per node as a valid option for srun when used with
overcommit.
-- BLUEGENE - With Dynamic layout mode - Fix issue where if a larger block
was already in error and isn't deallocating and underlying hardware goes
bad one could get overlapping blocks in error making the code assert when
a new job request comes in.
-- BGQ - handle pending actions on a block better when trying to deallocate it.
-- Accounting - Fixed issue where if nodenames have changed on a system and
you query against that with -N and -E you will get all jobs during that
time instead of only the ones running on -N.
-- Accounting - If a job start message fails to the SlurmDBD reset the db_inx
so it gets sent again. This isn't a major problem since the start will
happen when the job ends, but this does make things cleaner.
-- If an salloc is waiting for an allocation to happen and is canceled by the
user mark the state canceled instead of completed.
-- Fix issue in accounting if a user puts a '\' in their job name.
-- Accounting - Fix for if asking for users or accounts that were deleted
with associations get the deleted associations as well.
-- BGQ - Handle shared blocks that need to be removed and have jobs running
on them. This should only happen in extreme conditions.
-- Fix inconsistency for hostlists that have more than 1 range.
-- BGQ - Add mutex around recovery for the Real Time server to avoid hitting
DB2 so hard.
-- BGQ - If an allocation exists on a block that has a 'D' action on it fail
job on future step creation attempts.
* Changes in SLURM 2.4.4
========================
-- BGQ - minor fix to make build work in emulated mode.
-- BGQ - Fix if large block goes into error and the next highest priority jobs
are planning on using the block. Previously it would fail those jobs
erroneously.
-- BGQ - Fix issue when a cnode going to an error (not SoftwareError) state
with a job running or trying to run on it.
-- Execute slurm_spank_job_epilog when there is no system Epilog configured.
-- Fix for srun --test-only to work correctly with timelimits
-- BGQ - If a job goes away while still trying to free it up in the
database, and the job is running on a small block make sure we free up
the correct node count.
-- BGQ - Logic added to make sure a job has finished on a block before it is
purged from the system if its front-end node goes down.
-- Modify strigger so that a filter option of "--user=0" is supported.
-- Correct --mem-per-cpu logic for core or socket allocations with multiple
threads per core.
-- Fix for older < glibc 2.4 systems to use euidaccess() instead of eaccess().
-- BLUEGENE - Do not alter a pending job's node count when changing it's
partition.
-- BGQ - Add functionality to make it so we track the actions on a block.
This is needed for when a free request is added to a block but there are
jobs finishing up so we don't start new jobs on the block since they will
fail on start.
-- BGQ - Fixed InactiveLimit to work correctly to avoid scenarios where a
user's pending allocation was started with srun and then for some reason
the slurmctld was brought down and while it was down the srun was removed.
-- Fixed InactiveLimit math to work correctly
-- BGQ - Add logic to make it so blocks can't use a midplane with a nodeboard
in error for passthrough.
-- BGQ - Make it so if a nodeboard goes in error any block using that midplane
for passthrough gets removed on a dynamic system.
-- BGQ - Fix for printing realtime server debug correctly.
-- BGQ - Cleaner handling of cnode failures when reported through the runjob
interface instead of through the normal method.
-- smap - spread node information across multiple lines for larger systems.
-- Cray - Defer salloc until after PrologSlurmctld completes.
-- Correction to slurmdbd communications failure handling logic, incorrect
error codes returned in some cases.
* Changes in SLURM 2.4.3
========================
-- Accounting - Fix so complete 32 bit numbers can be put in for a priority.
-- cgroups - fix if initial directory is non-existent SLURM creates it
correctly. Before the errno wasn't being checked correctly
-- BGQ - fixed srun when only requesting a task count and not a node count
to operate the same way salloc or sbatch did and assign a task per cpu
by default instead of task per node.
-- Fix salloc --gid to work correctly. Reported by Brian Gilmer
-- BGQ - fix smap to set the correct default MloaderImage
-- Close the batch job's environment file when it contains no data to avoid
leaking file descriptors.
-- Fix sbcast's credential to last till the end of a job instead of the
previous 20 minute time limit. The previous behavior would fail for
large files 20 minutes into the transfer.
-- Return ESLURM_NODES_BUSY rather than ESLURM_NODE_NOT_AVAIL error on job
submit when required nodes are up, but completing a job or in exclusive
job allocation.
-- Add HWLOC_FLAGS so linking to libslurm works correctly
-- BGQ - If using backfill and a shared block is running at least one job
and a job comes through backfill and can fit on the block without ending
jobs don't set an end_time for the running jobs since they don't need to
end to start the job.
-- Initialize bind_verbose when using task/cgroup.
-- BGQ - Fix for handling backfill much better when sharing blocks.
-- BGQ - Fix for making small blocks on first pass if not sharing blocks.
-- BLUEGENE - Remove force of default conn_type instead of leaving NAV
when none are requested. The Block allocator sets it up temporarily so
this isn't needed.
-- BLUEGENE - Fix deadlock issue when dealing with bad hardware if using
static blocks.
-- Fix to mysql plugin during rollup to only query suspended table when jobs
reported some suspended time.
-- Fix compile with glibc 2.16 (Kacper Kowalik)
-- BGQ - fix for deadlock where a block has error on it and all jobs
running on it are preemptable by scheduling job.
-- proctrack/cgroup: Exclude internal threads from "scontrol list pids".
Patch from Matthieu Hautreux, CEA.
-- Memory leak fixed for select/linear when preempting jobs.
-- Fix if updating begin time of a job to update the eligible time in
accounting as well.
-- BGQ - make it so you can signal steps when signaling the job allocation.
-- BGQ - Remove extra overhead if a large block has many cnode failures.
-- Priority/Multifactor - Fix issue with age factor when a job is estimated to
start in the future but is able to run now.
-- CRAY - update to work with ALPS 5.1
-- BGQ - Handle issue of speed and mutexes when polling instead of using the
realtime server.
-- BGQ - Fix minor sorting issue with sview when sorting by midplanes.
-- Accounting - Fix for handling per user max node/cpus limits on a QOS
correctly for current job.
-- Update documentation for -/+= when updating a reservation's
users/accounts/flags
-- Update pam module to work if using aliases on nodes instead of actual
host names.
-- Correction to task layout logic in select/cons_res for job with minimum
and maximum node count.
-- BGQ - Put final poll after realtime comes back into service to avoid
having the realtime server go down over and over again while waiting
for the poll to finish.
-- task/cgroup/memory - ensure that ConstrainSwapSpace=no is correctly
handled. Work by Matthieu Hautreux, CEA.
-- CRAY - Fix for sacct -N option to work correctly
-- CRAY - Update documentation to describe installation from rpm instead
or previous piecemeal method.
-- Fix sacct to work with QOS' that have previously been deleted.
-- Added all available limits to the output of sacctmgr list qos
* Changes in SLURM 2.4.2
========================
-- BLUEGENE - Correct potential deadlock issue when hardware goes bad and
there are jobs running on that hardware.
-- If job is submitted to more than one partition, it's partition pointer can
be set to an invalid value. This can result in the count of CPUs allocated
on a node being bad, resulting in over- or under-allocation of its CPUs.
Patch by Carles Fenoy, BSC.
-- Fix bug in task layout with select/cons_res plugin and --ntasks-per-node
option. Patch by Martin Perry, Bull.
-- BLUEGENE - remove race condition where if a block is removed while waiting
for a job to finish on it the number of unused cpus wasn't updated
correctly.
-- BGQ - make sure we have a valid block when creating or finishing a step
allocation.
-- BLUEGENE - If a large block (> 1 midplane) is in error and underlying
hardware is marked bad remove the larger block and create a block over
just the bad hardware making the other hardware available to run on.
-- BLUEGENE - Handle job completion correctly if an admin removes a block
where other blocks on an overlapping midplane are running jobs.
-- BLUEGENE - correctly remove running jobs when freeing a block.
-- BGQ - correct logic to place multiple (< 1 midplane) steps inside a
multi midplane block allocation.
-- BGQ - Make it possible for a multi midplane allocation to run on more
than 1 midplane but not the entire allocation.
-- BGL - Fix for syncing users on block from Tim Wickberg
-- Fix initialization of protocol_version for some messages to make sure it
is always set when sending or receiving a message.
Alejandro Lucero Palau
committed
-- Reset backfilled job counter only when explicitly cleared using scontrol.
Patch from Alejandro Lucero Palau, BSC.
-- BLUEGENE - Fix for handling blocks when a larger block will not free and
while it is attempting to free underlying hardware is marked in error
making small blocks overlapping with the freeing block. This only
applies to dynamic layout mode.
-- Cray and BlueGene - Do not treat lack of usable front-end nodes when
slurmctld deamon starts as a fatal error. Also preserve correct front-end
node for jobs when there is more than one front-end node and the slurmctld
daemon restarts.
Morris Jette
committed
-- Correct parsing of srun/sbatch input/output/error file names so that only
the name "none" is mapped to /dev/null and not any file name starting
with "none" (e.g. "none.o").
-- BGQ - added version string to the load of the runjob_mux plugin to verify
the current plugin has been loaded when using runjob_mux_refresh_config
-- CGROUPS - Use system mount/umount function calls instead of doing fork
exec of mount/umount from Janne Blomqvist.
-- BLUEGENE - correct start time setup when no jobs are blocking the way
from Mark Nelson
-- Fixed sacct --state=S query to return information about suspended jobs
current or in the past.
-- FRONTEND - Made error warning more apparent if a frontend node isn't
configured correctly.
-- BGQ - update documentation about runjob_mux_refresh_config which works
correctly as of IBM driver V1R1M1 efix 008.
* Changes in SLURM 2.4.1
========================
-- Fix bug for job state change from 2.3 -> 2.4 job state can now be preserved
correctly when transitioning. This also applies for 2.4.0 -> 2.4.1, no
state will be lost. (Thanks to Carles Fenoy)
* Changes in SLURM 2.4.0
========================
-- Cray - Improve support for zero compute note resource allocations.
Partition used can now be configured with no nodes nodes.
-- BGQ - make it so srun -i<taskid> works correctly.
-- Fix parse_uint32/16 to complain if a non-digit is given.
-- Add SUBMITHOST to job state passed to Moab vial sched/wiki2. Patch by Jon
Bringhurst (LANL).
-- BGQ - Fix issue when running with AllowSubBlockAllocations=Yes without
compiling with --enable-debug
-- Modify scontrol to require "-dd" option to report batch job's script. Patch
from Don Albert, Bull.
-- Modify SchedulerParamters option to match documentation: "bf_res="
changed to "bf_resolution=". Patch from Rod Schultz, Bull.
-- Fix bug that clears job pending reason field. Patch fron Don Lipari, LLNL.
-- In etc/init.d/slurm move check for scontrol after sourcing
/etc/sysconfig/slurm. Patch from Andy Wettstein, University of Chicago.
-- Fix in scheduling logic that can delay jobs with min/max node counts.
-- BGQ - fix issue where if a step uses the entire allocation and then
the next step in the allocation only uses part of the allocation it gets
the correct cnodes.
-- BGQ - Fix checking for IO on a block with new IBM driver V1R1M1 previous
function didn't always work correctly.
-- BGQ - Fix issue when a nodeboard goes down and you want to combine blocks
to make a larger small block and are running with sub-blocks.
-- BLUEGENE - Better logic for making small blocks around bad nodeboard/card.
-- BGQ - When using an old IBM driver cnodes that go into error because of
a job kill timeout aren't always reported to the system. This is now
handled by the runjob_mux plugin.
-- BGQ - Added information on how to setup the runjob_mux to run as SlurmUser.
-- Improve memory consumption on step layouts with high task count.
-- BGQ - quiter debug when the real time server comes back but there are
still messages we find when we poll but haven't given it back to the real
time yet.
-- BGQ - fix for if a request comes in smaller than the smallest block and
we must use a small block instead of a shared midplane block.
-- Fix issues on large jobs (>64k tasks) to have the correct counter type when
packing the step layout structure.
-- BGQ - fix issue where if a user was asking for tasks and ntasks-per-node
but not node count the node count is correctly figured out.
-- Move logic to always use the 1st alphanumeric node as the batch host for
batch jobs.
-- BLUEGENE - fix race condition where if a nodeboard/card goes down at the
same time a block is destroyed and that block just happens to be the
smallest overlapping block over the bad hardware.
-- Fix bug when querying accounting looking for a job node size.
-- BLUEGENE - fix possible race condition if cleaning up a block and the
removal of the job on the block failed.
-- BLUEGENE - fix issue if a cable was in an error state make it so we can
check if a block is still makable if the cable wasn't in error.
-- Put nodes names in alphabetic order in node table.
-- If preempted job should have a grace time and preempt mode is not cancel
but job is going to be canceled because it is interactive or other reason
it now receives the grace time.
-- BGQ - Modified documents to explain new plugin_flags needed in bg.properties
in order for the runjob_mux to run correctly.
-- BGQ - change linking from libslurm.o to libslurmhelper.la to avoid warning.
-- Improve task binding logic by making fuller use of HWLOC library,
especially with respect to Opteron 6000 series processors. Work contributed
by Komoto Masahiro.
-- Add new configuration parameter PriorityFlags, based upon work by
Carles Fenoy (Barcelona Supercomputer Center).
-- Modify the step completion RPC between slurmd and slurmstepd in order to
eliminate a possible deadlock. Based on work by Matthieu Hautreux, CEA.
-- Change the owner of slurmctld and slurmdbd log files to the appropriate
user. Without this change the files will be created by and owned by the
user starting the daemons (likely user root).
-- Reorganize the slurmstepd logic in order to better support NFS and
Kerberos credentials via the AUKS plugin. Work by Matthieu Hautreux, CEA.
-- Fix bug in allocating GRES that are associated with specific CPUs. In some
cases the code allocated first available GRES to job instead of allocating
GRES accessible to the specific CPUs allocated to the job.
-- spank: Add callbacks in slurmd: slurm_spank_slurmd_{init,exit}
and job epilog/prolog: slurm_spank_job_{prolog,epilog}
-- spank: Add spank_option_getopt() function to api
-- Change resolution of switch wait time from minutes to seconds.
-- Added CrpCPUMins to the output of sshare -l for those using hard limit
accounting. Work contributed by Mark Nelson.
-- Added mpi/pmi2 plugin for complete support of pmi2 including acquiring
additional resources for newly launched tasks. Contributed by Hongjia Cao,
NUDT.
-- BGQ - fixed issue where if a user asked for a specific node count and more
tasks than possible without overcommit the request would be allowed on more
nodes than requested.
-- Add support for new SchedulerParameters of bf_max_job_user, maximum number
of jobs to attempt backfilling per user. Work by Bjørn-Helge Mevik,
University of Oslo.
-- BLUEGENE - fixed issue where MaxNodes limit on a partition only limited
larger than midplane jobs.
-- Added cpu_run_min to the output of sshare --long. Work contributed by
Mark Nelson.
-- BGQ - allow regular users to resolve Rack-Midplane to AXYZ coords.
-- Add sinfo output format option of "%R" for partition name without "*"
appended for default partition.
-- Cray - Add support for zero compute note resource allocation to run batch
script on front-end node with no ALPS reservation. Useful for pre- or post-
processing.
-- Support for cyclic distribution of cpus in task/cgroup plugin from Martin
Perry, Bull.
-- GrpMEM limit for QOSes and associations added Patch from Bjørn-Helge Mevik,
University of Oslo.
-- Various performance improvements for up to 500% higher throughput depending
upon configuration. Work supported by the Oak Ridge National Laboratory
Extreme Scale Systems Center.
-- Added jobacct_gather/cgroup plugin. It is not advised to use this in
production as it isn't currently complete and doesn't provide an equivalent
substitution for jobacct_gather/linux yet. Work by Martin Perry, Bull.
* Changes in SLURM 2.4.0.pre4
=============================
-- Add logic to cache GPU file information (bitmap index mapping to device
file number) in the slurmd daemon and transfer that information to the
slurmstepd whenever a job step is initiated. This is needed to set the
appropriate CUDA_VISIBLE_DEVICES environment variable value when the
devices are not in strict numeric order (e.g. some GPUs are skipped).
Based upon work by Nicolas Bigaouette.
-- BGQ - Remove ability to make a sub-block with a geometry with one or more
of it's dimensions of length 3. There is a limitation in the IBM I/O
subsystem that is problematic with multiple sub-blocks with a dimension
of length 3, so we will disallow them to be able to be created. This
mean you if you ask the system for an allocation of 12 c-nodes you will
be given 16. If this is ever fix in BGQ you can remove this patch.
-- BLUEGENE - Better handling blocks that go into error state or deallocate
while jobs are running on them.
-- BGQ - fix for handling mix of steps running at same time some of which
are full allocation jobs, and others that are smaller.
-- BGQ - fix for core dump after running multiple sub-block jobs on static
blocks.
-- BGQ - fixed sync issue where if a job finishes in SLURM but not in mmcs
for a long time after the SLURM job has been flushed from the system
we don't have to worry about rebooting the block to sync the system.
-- BGQ - In scontrol/sview node counts are now displayed with
CnodeCount/CnodeErrCount so to point out there are cnodes in an error state
on the block. Draining the block and having it reboot when all jobs are
gone will clear up the cnodes in Software Failure.
-- Change default SchedulerParameters max_switch_wait field value from 60 to
300 seconds.
-- BGQ - catch errors from the kill option of the runjob client.
-- BLUEGENE - make it so the epilog runs until slurmctld tells it the job is
gone. Previously it had a timelimit which has proven to not be the right
thing.
-- FRONTEND - fix issue where if a compute node was in a down state and
an admin updates the node to idle/resume the compute nodes will go
instantly to idle instead of idle* which means no response.
-- Fix regression in 2.4.0.pre3 where number of submitted jobs limit wasn't
being honored for QOS.
-- Cray - Enable logging of BASIL communications with environment variables.
Set XML_LOG to enable logging. Set XML_LOG_LOC to specify path to log file
or "SLURM" to write to SlurmctldLogFile or unset for "slurm_basil_xml.log".
Patch from Steve Tronfinoff, CSCS.
-- FRONTEND - if a front end unexpectedly reboots kill all jobs but don't
mark front end node down.
-- FRONTEND - don't down a front end node if you have an epilog error
-- BLUEGENE - if a job has an epilog error don't down the midplane it was
running on.
-- BGQ - added new DebugFlag (NoRealTime) for only printing debug from
state change while the realtime server is running.
-- Fix multi-cluster mode with sview starting on a non-bluegene cluster going
to a bluegene cluster.
-- BLUEGENE - ability to show Rack Midplane name of midplanes in sview and
scontrol.
* Changes in SLURM 2.4.0.pre3
=============================
-- Let a job be submitted even if it exceeds a QOS limit. Job will be left
in a pending state until the QOS limit or job parameters change. Patch by
Phil Eckert, LLNL.
-- Add sacct support for the option "--name". Work by Yuri D'Elia, Center for
Biomedicine, EURAC Research, Italy.
-- Add an srun shepard process to cancel a job and/or step of the srun process
is killed abnormally (e.g. SIGKILL).
-- BGQ - handle deadlock issue when a nodeboard goes into an error state.
-- BGQ - more thorough handling of blocks with multiple jobs running on them.
-- Fix man2html process to compile in the build directory instead of the
source dir.
-- Behavior of srun --multi-prog modified so that any program arguments
specified on the command line will be appended to the program arguments
specified in the program configuration file.
-- Add new command, sdiag, which reports a variety of job scheduling
statistics. Based upon work by Alejandro Lucero Palau, BSC.
-- BLUEGENE - Added DefaultConnType to the bluegene.conf file. This makes it
so you can specify any connection type you would like (TORUS or MESH) as
the default in dynamic mode. Previously it always defaulted to TORUS.
-- Made squeue -n and -w options more consistent with salloc, sbatch, srun,
and scancel. Patch by Don Lipari, LLNL.
-- Have sacctmgr remove user records when no associations exist for that user.
-- Several header file changes for clean build with NetBSD. Patches from
Aleksej Saushev.
-- Fix for possible deadlock in accounting logic: Avoid calling
jobacct_gather_g_getinfo() until there is data to read from the socket.
-- Fix race condition that could generate "job_cnt_comp underflow" errors on
front-end architectures.
-- BGQ - Fix issue where a system with missing cables could cause core dump.
* Changes in SLURM 2.4.0.pre2
=============================
-- CRAY - Add support for GPU memory allocation using SLURM GRES (Generic
RESource) support. Work by Steve Trofinoff, CSCS.
-- Add support for job allocations with multiple job constraint counts. For
example: salloc -C "[rack1*2&rack2*4]" ... will allocate the job 2 nodes
from rack1 and 4 nodes from rack2. Support for only a single constraint
name been added to job step support.
-- BGQ - Remove old method for marking cnodes down.
-- BGQ - Remove BGP images from view in sview.
-- BGQ - print out failed cnodes in scontrol show nodes.
-- BGQ - Add srun option of "--runjob-opts" to pass options to the runjob
command.
-- FRONTEND - handle step launch failure better.
-- BGQ - Added a mutex to protect the now changing ba_system pointers.
-- BGQ - added new functionality for sub-block allocations - no preemption
for this yet though.
-- Add --name option to squeue to filter output by job name. Patch from Yuri
D'Elia.
-- BGQ - Added linking to runjob client libary which gives support to totalview
to use srun instead of runjob.
-- Add numeric range checks to scontrol update options. Patch from Phil
Eckert, LLNL.
-- Add ReconfigFlags configuration option to control actions of "scontrol
reconfig". Patch from Don Albert, Bull.
-- BGQ - handle reboots with multiple jobs running on a block.
-- BGQ - Add message handler thread to forward signals to runjob process.
* Changes in SLURM 2.4.0.pre1
=============================
-- BGQ - use the ba_geo_tables to figure out the blocks instead of the old
algorithm. The improves timing in the worst cases and simplifies the code
greatly.
-- BLUEGENE - Change to output tools labels from BP to Midplane
(i.e. BP List -> MidplaneList).
-- BLUEGENE - read MPs and BPs from the bluegene.conf
-- Modify srun's SIGINT handling logic timer (two SIGINTs within one second) to
be based microsecond rather than second timer.
-- Modify advance reservation to accept multiple specific block sizes rather
than a single node count.
-- Permit administrator to change a job's QOS to any value without validating
the job's owner has permission to use that QOS. Based upon patch by Phil
Eckert (LLNL).
-- Add trigger flag for a permanent trigger. The trigger will NOT be purged
after an event occurs, but only when explicitly deleted.
-- Interpret a reservation with Nodes=ALL and a Partition specification as
reserving all nodes within the specified partition rather than all nodes
on the system. Based upon patch by Phil Eckert (LLNL).
-- Add the ability to reboot all compute nodes after they become idle. The
RebootProgram configuration parameter must be set and an authorized user
must execute the command "scontrol reboot_nodes". Patch from Andriy
Grytsenko (Massive Solutions Limited).
-- Modify slurmdbd.conf parsing to accept DebugLevel strings (quiet, fatal,
info, etc.) in addition to numeric values. The parsing of slurm.conf was
modified in the same fashion for SlurmctldDebug and SlurmdDebug values.
The output of sview and "scontrol show config" was also modified to report
those values as strings rather than numeric values.
-- Changed default value of StateSaveLocation configuration parameter from
-- Prevent associations from being deleted if it has any jobs in running,
pending or suspended state. Previous code prevented this only for running
jobs.
-- If a job can not run due to QOS or association limits, then do not cancel
the job, but leave it pending in a system held state (priority = 1). The
job will run when its limits or the QOS/association limits change. Based
upon a patch by Phil Ekcert (LLNL).
-- BGQ - Added logic to keep track of cnodes in an error state inside of a
booted block.
-- Added the ability to update a node's NodeAddr and NodeHostName with
scontrol. Also enable setting a node's state to "future" using scontrol.
-- Add a node state flag of CLOUD and save/restore NodeAddr and NodeHostName
information for nodes with a flag of CLOUD.
-- Cray: Add support for job reservations with node IDs that are not in
numeric order. Fix for Bugzilla #5.
-- Fix association limit support for jobs queued for multiple partitions.
-- BLUEGENE - fix issue for sub-midplane systems to create a full system
block correctly.
-- BLUEGENE - Added option to the bluegene.conf to tell you are running on
a sub midplane system.
-- Added the UserID of the user issuing the RPC to the job_submit/lua
functions.
-- Fixed issue where if a job ended with ESLURMD_UID_NOT_FOUND and
ESLURMD_GID_NOT_FOUND where slurm would be a little over zealous
in treating missing a GID or UID as a fatal error.
-- If job time limit exceeds partition maximum, but job's minimum time limit
does not, set job's time limit to partition maximum at allocation time.
* Changes in SLURM 2.3.6
========================
-- Fix DefMemPerCPU for partition definitions.
-- Fix to create a reservation with licenses and no nodes.
-- Fix issue with assoc_mgr if a bad state file is given and the database
isn't up at the time the slurmctld starts, not running the
priority/multifactor plugin, and then the database is started up later.
-- Gres: If a gres has a count of one and an associated file then when doing
a reconfiguration, the node's bitmap was not cleared resulting in an
underflow upon job termination or removal from scheduling matrix by the
backfill scheduler.
-- Fix race condition in job dependency logic which can result in invalid
memory reference.
* Changes in SLURM 2.3.5
========================
-- Improve support for overlapping advanced reservations. Patch from
Bill Brophy, Bull.
-- Modify Makefiles for support of Debian hardening flags. Patch from
Simon Ruderich.
-- CRAY: Fix support for configuration with SlurmdTimeout=0 (never mark
node that is DOWN in ALPS as DOWN in SLURM).
-- Fixed the setting of SLURM_SUBMIT_DIR for jobs submitted by Moab (BZ#1467).
Patch by Don Lipari, LLNL.
-- Correction to init.d/slurmdbd exit code for status option. Patch by Bill
Brophy, Bull.
-- When the optional max_time is not specified for --switches=count, the site
max (SchedulerParameters=max_switch_wait=seconds) is used for the job.
Based on patch from Rod Schultz.
-- Fix bug in select/cons_res plugin when used with topology/tree and a node
range count in job allocation request.
-- Fixed moab_2_slurmdb.pl script to correctly work for end records.
-- Add support for new SchedulerParameters of max_depend_depth defining the
maximum number of jobs to test for circular dependencies (i.e. job A waits
for job B to start and job B waits for job A to start). Default value is
10 jobs.
-- Fix potential race condition if MinJobAge is very low (i.e. 1) and using
slurmdbd accounting and running large amounts of jobs (>50 sec). Job
information could be corrupted before it had a chance to reach the DBD.
-- Fix state restore of job limit set from admin value for min_cpus.
-- Fix clearing of limit values if an admin removes the limit for max cpus
and time limit where it was previously set by an admin.
-- Fix issue where log message is more than 256 chars and then has a format.
-- Fix sched/wiki2 to support job account name, gres, partition name, wckey,
or working directory that contains "#" (a job record separator). Also fix
for wckey or working directory that contains a double quote '\"'.
-- CRAY - fix for handling memory requests from user for an allocation.
-- Add support for switches parameter to the job_submit/lua plugin. Work by
Par Andersson, NSC.
-- Fix to job preemption logic to preempt multiple jobs at the same time.
-- Fix minor issue where uid and gid were switched in sview for submitting
batch jobs.
-- Fix possible illegal memory reference in slurmctld for job step with
relative option. Work by Matthieu Hautreux (CEA).
-- Reset priority of system held jobs when dependency is satisfied. Work by
Don Lipari, LLNL.
* Changes in SLURM 2.3.4
========================
-- Set DEFAULT flag in partition structure when slurmctld reads the
configuration file. Patch from Rémi Palancher.
-- Fix for possible deadlock in accounting logic: Avoid calling
jobacct_gather_g_getinfo() until there is data to read from the socket.
-- Fix typo in accounting when using reservations. Patch from Alejandro
Lucero Palau.
-- Fix to the multifactor priority plugin to calculate effective usage earlier
to give a correct priority on the first decay cycle after a restart of the
slurmctld. Patch from Martin Perry, Bull.
-- Permit user root to run a job step for any job as any user. Patch from
Didier Gazen, Laboratoire d'Aerologie.
-- BLUEGENE - fix for not allowing jobs if all midplanes are drained and all
blocks are in an error state.
-- Avoid slurmctld abort due to bad pointer when setting an advanced
reservation MAINT flag if it contains no nodes (only licenses).
-- Fix bug when requeued batch job is scheduled to run on a different node
zero, but attemts job launch on old node zero.
-- Fix bug in step task distribution when nodes are not configured in numeric
order. Patch from Hongjia Cao, NUDT.
-- Fix for srun allocating running within existing allocation with --exclude
option and --nnodes count small enough to remove more nodes. Patch from
Phil Eckert, LLNL.
-- Work around to handle certain combinations of glibc/kernel
(i.e. glibc-2.14/Linux-3.1) to correctly open the pty of the slurmstepd
as the job user. Patch from Mark Grondona, LLNL.
-- Modify linking to include "-ldl" only when needed. Patch from Aleksej
Saushev.
-- Fix smap regression to display nodes that are drained or down correctly.
-- Several bug fixes and performance improvements with related to batch
scripts containing very large numbers of arguments. Patches from Par
Andersson, NSC.
-- Fixed extremely hard to reproduce threading issue in assoc_mgr.
-- Correct "scontrol show daemons" output if there is more than one
ControlMachine configured.
-- Add node read lock where needed in slurmctld/agent code.
-- Added test for LUA library named "liblua5.1.so.0" in addition to
"liblua5.1.so" as needed by Debian. Patch by Remi Palancher.
-- Added partition default_time field to job_submit LUA plugin. Patch by
Remi Palancher.
-- Fix bug in cray/srun wrapper stdin/out/err file handling.
-- In cray/srun wrapper, only include aprun "-q" option when srun "--quiet"
option is used.
-- BLUEGENE - fix issue where if a small block was in error it could hold up
the queue when trying to place a larger than midplane job.
-- CRAY - ignore all interactive nodes and jobs on interactive nodes.
-- Add new job state reason of "FrontEndDown" which applies only to Cray and
IBM BlueGene systems.
-- Cray - Enable configure option of "--enable-salloc-background" to permit
the srun and salloc commands to be executed in the background. This does
NOT remove the ALPS limitation that only one job reservation can be created
for each Linux session ID.
-- Cray - For srun wrapper when creating a job allocation, set the default job
name to the executable file's name.
-- FRONTEND - if a front end unexpectedly reboots kill all jobs but don't
mark front end node down.
-- FRONTEND - don't down a front end node if you have an epilog error.
-- Cray - fix for if a frontend slurmd was started after the slurmctld had
already pinged it on startup the unresponding flag would be removed from
the frontend node.
-- Cray - Fix issue on smap not displaying grid correctly.
* Changes in SLURM 2.3.3
========================
-- Fix task/cgroup plugin error when used with GRES. Patch by Alexander
Bersenev (Institute of Mathematics and Mechanics, Russia).
-- Permit pending job exceeding a partition limit to run if its QOS flag is
modified to permit the partition limit to be exceeded. Patch from Bill
Brophy, Bull.
-- sacct search for jobs using filtering was ignoring wckey filter.
-- Fixed issue with QOS preemption when adding new QOS.
-- Fixed issue with comment field being used in a job finishing before it
starts in accounting.
-- Add slashes in front of derived exit code when modifying a job.
-- Handle numeric suffix of "T" for terabyte units. Patch from John Thiltges,
University of Nebraska-Lincoln.
-- Prevent resetting a held job's priority when updating other job parameters.
Patch from Alejandro Lucero Palau, BSC.
-- Improve logic to import a user's environment. Needed with --get-user-env
option used with Moab. Patch from Mark Grondona, LLNL.
-- Fix bug in sview layout if node count less than configured grid_x_width.
-- Modify PAM module to prefer to use SLURM library with same major release
number that it was built with.
-- Permit gres count configuration of zero.
-- Fix race condition where sbcast command can result in deadlock of slurmd
daemon. Patch by Don Albert, Bull.
-- Fix bug in srun --multi-prog configuration file to avoid printing duplicate
record error when "*" is used at the end of the file for the task ID.
-- Let operators see reservation data even if "PrivateData=reservations" flag
is set in slurm.conf. Patch from Don Albert, Bull.
-- Added new sbatch option "--export-file" as needed for latest version of
Moab. Patch from Phil Eckert, LLNL.
-- Fix for sacct printing CPUTime(RAW) where the the is greater than a 32 bit
number.
-- Fix bug in --switch option with topology resulting in bad switch count use.
Patch from Alejandro Lucero Palau (Barcelona Supercomputer Center).
-- Fix PrivateFlags bug when using Priority Multifactor plugin. If using sprio
all jobs would be returned even if the flag was set.
Patch from Bill Brophy, Bull.
-- Fix for possible invalid memory reference in slurmctld in job dependency
logic. Patch from Carles Fenoy (Barcelona Supercomputer Center).
* Changes in SLURM 2.3.2
========================
-- Add configure option of "--without-rpath" which builds SLURM tools without
the rpath option, which will work if Munge and BlueGene libraries are in
the default library search path and make system updates easier.
-- Fixed issue where if a job ended with ESLURMD_UID_NOT_FOUND and
ESLURMD_GID_NOT_FOUND where slurm would be a little over zealous
in treating missing a GID or UID as a fatal error.
-- Backfill scheduling - Add SchedulerParameters configuration parameter of
"bf_res" to control the resolution in the backfill scheduler's data about
when jobs begin and end. Default value is 60 seconds (used to be 1 second).
-- Cray - Remove the "family" specification from the GPU reservation request.
Morris Jette
committed
-- Updated set_oomadj.c, replacing deprecated oom_adj reference with
oom_score_adj
-- Fix resource allocation bug, generic resources allocation was ignoring the
job's ntasks_per_node and cpus_per_task parameters. Patch from Carles
Fenoy, BSC.
-- Avoid orphan job step if slurmctld is down when a job step completes.
-- Fix Lua link order, patch from Pär Andersson, NSC.
-- Set SLURM_CPUS_PER_TASK=1 when user specifies --cpus-per-task=1.
-- Fix for fatal error managing GRES. Patch by Carles Fenoy, BSC.
-- Fixed race condition when using the DBD in accounting where if a job
wasn't started at the time the eligible message was sent but started
before the db_index was returned information like start time would be lost.
-- Fix issue in accounting where normalized shares could be updated
incorrectly when getting fairshare from the parent.
-- Fixed if not enforcing associations but want QOS support for a default
qos on the cluster to fill that in correctly.
-- Fix in select/cons_res for "fatal: cons_res: sync loop not progressing"
with some configurations and job option combinations.
-- BLUEGNE - Fixed issue with handling HTC modes and rebooting.
-- Do not remove the backup slurmctld's pid file when it assumes control, only
when it actually shuts down. Patch from Andriy Grytsenko (Massive Solutions
Limited).
-- Avoid clearing a job's reason from JobHeldAdmin or JobHeldUser when it is
otherwise updated using scontrol or sview commands. Patch based upon work
by Phil Eckert (LLNL).
-- BLUEGENE - Fix for if changing the defined blocks in the bluegene.conf and
jobs happen to be running on blocks not in the new config.
-- Many cosmetic modifications to eliminate warning message from GCC version
4.6 compiler.
-- Fix for sview reservation tab when finding correct reservation.
-- Fix for handling QOS limits per user on a reconfig of the slurmctld.
-- Do not treat the absence of a gres.conf file as a fatal error on systems
configured with GRES, but set GRES counts to zero.
-- BLUEGENE - Update correctly the state in the reason of a block if an
admin sets the state to error.
-- BLUEGENE - handle reason of blocks in error more correctly between
restarts of the slurmctld.
-- BLUEGENE - Fix minor potential memory leak when setting block error reason.
-- BLUEGENE - Fix if running in Static/Overlap mode and full system block
is in an error state, won't deny jobs.
-- Fix for accounting where your cluster isn't numbered in counting order
(i.e. 1-9,0 instead of 0-9). The bug would cause 'sacct -N nodename' to
not give correct results on these systems.
-- Fix to GRES allocation logic when resources are associated with specific
CPUs on a node. Patch from Steve Trofinoff, CSCS.
-- Fix bugs in sched/backfill with respect to QOS reservation support and job
time limits. Patch from Alejandro Lucero Palau (Barcelona Supercomputer
Center).
-- BGQ - fix to set up corner correctly for sub block jobs.
-- Major re-write of the CPU Management User and Administrator Guide (web
page) by Martin Perry, Bull.
-- BLUEGENE - If removing blocks from system that once existed cleanup of old
block happens correctly now.
-- Prevent slurmctld crashing with configuration of MaxMemPerCPU=0.
-- Prevent job hold by operator or account coordinator of his own job from
being an Administrator Hold rather than User Hold by default.
-- Cray - Fix for srun.pl parsing to avoid adding spaces between option and
argument (e.g. "-N2" parsed properly without changing to "-N 2").
-- Major updates to cgroup support by Mark Grondona (LLNL) and Matthieu
Hautreux (CEA) and Sam Lang. Fixes timing problems with respect to the
task_epilog. Allows cgroup mount point to be configurable. Added new
configuration parameters MaxRAMPercent and MaxSwapPercent. Allow cgroup
configuration parameters that are precentages to be floating point.
-- Fixed issue where sview wasn't displaying correct nice value for jobs.
-- Fixed issue where sview wasn't displaying correct min memory per node/cpu
value for jobs.
-- Disable some SelectTypeParameters for select/linear that aren't compatible.
-- Move slurm_select_init to proper place to avoid loading multiple select
plugins in the slurmd.
-- BGQ - Include runjob_plugin.so in the bluegene rpm.
-- Report correct job "Reason" if needed nodes are DOWN, DRAINED, or
NOT_RESPONDING, "Resources" rather than "PartitionNodeLimit".
-- BLUEGENE - Fixed issues with running on a sub-midplane system.
-- Added some missing calls to allow older versions of SLURM to talk to newer.
-- Do not attempt to run HeathCheckProgram on powered down nodes. Patch from
Ramiro Alba, Centre Tecnològic de Tranferència de Calor, Spain.
* Changes in SLURM 2.3.0-2
==========================
-- Fix issue where if a job was pending and the slurmctld was restarted a
variable wasn't initialized in the job structure making it so that job
wouldn't run.
========================
-- BLUEGENE - make sure we only set the jobinfo_select start_loc on a job
when we are on a small block, not a regular one.
-- BGQ - fix issue where not copying the correct amount of memory.
-- BLUEGENE - fix clean start if jobs were running when the slurmctld was
shutdown and then the system size changed. This would probably only happen
if you were emulating a system.
-- Fix sview for calling a cray system from a non-cray system to get the
correct geometry of the system.
-- BLUEGENE - fix to correctly import pervious version of block state file.
-- BLUEGENE - handle loading better when doing a clean start with static
blocks.
-- Add sinfo format and sort option "%n" for NodeHostName and "%o" for
NodeAddr.
-- If a job is deferred due to partition limits, then re-test those limits
after a partition is modified. Patch from Don Lipari.
-- Fix bug which would crash slurmcld if job's owner (not root) tries to clear
a job's licenses by setting value to "".
-- Cosmetic fix for printing out debug info in the priority plugin.
-- In sview when switching from a bluegene machine to a regular linux cluster
and vice versa the node->base partition lists will be displayed if setup
in your .slurm/sviewrc file.
-- BLUEGENE - Fix for creating full system static block on a BGQ system.
-- BLUEGENE - Fix deadlock issue if toggling between Dynamic and Static block
allocation with jobs running on blocks that don't exist in the static
setup.
-- BLUEGENE - Modify code to only give HTC states to BGP systems and not
allow them on Q systems.
-- BLUEGENE - Make it possible for an admin to define multiple dimension
conn_types in a block definition.
-- BGQ - Alter tools to output multiple dimensional conn_type.
-- With sched/wiki or sched/wiki2 (Maui or Moab scheduler), insure that a
requeued job's priority is reset to zero.
-- BLUEGENE - fix to run steps correctly in a BGL/P emulated system.
-- Fixed issue where if there was a network issue between the slurmctld and
the DBD where both remained up but were disconnected the slurmctld would
get registered again with the DBD.
-- Fixed issue where if the DBD connection from the ctld goes away because of
a POLLERR the dbd_fail callback is called.
-- BLUEGENE - Fix to smap command-line mode display.
-- Change in GRES behavior for job steps: A job step's default generic
resource allocation will be set to that of the job. If a job step's --gres
value is set to "none" then none of the generic resources which have been
allocated to the job will be allocated to the job step.
-- Add srun environment value of SLURM_STEP_GRES to set default --gres value
for a job step.
-- Require SchedulerTimeSlice configuration parameter to be at least 5 seconds
to avoid thrashing slurmd daemon.
-- Cray - Fix to make nodes state in accounting consistent with state set by
ALPS.
-- Cray - A node DOWN to ALPS will be marked DOWN to SLURM only after reaching
SlurmdTimeout. In the interim, the node state will be NO_RESPOND. This
change makes behavior makes SLURM handling of the node DOWN state more
consistent with ALPS. This change effects only Cray systems.
-- Cray - Fix to work with 4.0.* instead of just 4.0.0
-- Cray - Modify srun/aprun wrapper to map --exclusive to -F exclusive and
--share to -F share. Note this does not consider the partition's Shared
configuration, so it is an imperfect mapping of options.
-- BLUEGENE - Added notice in the print config to tell if you are emulated
or not.
-- BLUEGENE - Fix job step scalability issue with large task count.
-- BGQ - Improved c-node selection when asked for a sub-block job that
cannot fit into the available shape.
-- BLUEGENE - Modify "scontrol show step" to show I/O nodes (BGL and BGP) or
c-nodes (BGQ) allocated to each step. Change field name from "Nodes=" to
"BP_List=".
-- Code cleanup on step request to get the correct select_jobinfo.
-- Memory leak fixed for rolling up accounting with down clusters.
-- BGQ - fix issue where if first job step is the entire block and then the
next parallel step is ran on a sub block, SLURM won't over subscribe cnodes.
-- Treat duplicate switch name in topology.conf as fatal error. Patch from Rod
Schultz, Bull
-- Minor update to documentation describing the AllowGroups option for a
partition in the slurm.conf.
-- Fix problem with _job_create() when not using qos's. It makes
_job_create() consistent with similar logic in select_nodes().
-- GrpCPURunMins in a QOS flushed out.
-- Fix for squeue -t "CONFIGURING" to actually work.
-- CRAY - Add cray.conf parameter of SyncTimeout, maximum time to defer job
scheduling if SLURM node or job state are out of synchronization with ALPS.
-- If salloc was run as interactive, with job control, reset the foreground
process group of the terminal to the process group of the parent pid before
exiting. Patch from Don Albert, Bull.
-- BGQ - set up the corner of a sub block correctly based on a relative
position in the block instead of absolute.
-- BGQ - make sure the recently added select_jobinfo of a step launch request
isn't sent to the slurmd where environment variables would be overwritten
incorrectly.
-- NOTE THERE HAVE BEEN NEW FIELDS ADDED TO THE JOB AND PARTITION STATE SAVE
FILES AND RPCS. PENDING AND RUNNING JOBS WILL BE LOST WHEN UPGRADING FROM
EARLIER VERSION 2.3 PRE-RELEASES AND RPCS WILL NOT WORK WITH EARLIER
VERSIONS.
-- select/cray: Add support for Accelerator information including model and
memory options.
-- Cray systems: Add support to suspend/resume salloc command to insure that
aprun does not get initiated when the job is suspended. Processes suspended
and resumed are determined by using process group ID and parent process ID,
so some processes may be missed. Since salloc runs as a normal user, it's
ability to identify processes associated with a job is limited.
-- Cray systems: Modify smap and sview to display all nodes even if multiple
nodes exist at each coordinate.
-- Improve efficiency of select/linear plugin with topology/tree plugin
configured, Patch by Andriy Grytsenko (Massive Solutions Limited).
-- For front-end architectures on which job steps are run (emulated Cray and
BlueGene systems only), fix bug that would free memory still in use.
-- Add squeue support to display a job's license information. Patch by Andy
Roosen (University of Deleware).
-- Add flag to the select APIs for job suspend/resume indicating if the action
is for gang scheduling or an explicit job suspend/resume by the user. Only
an explicit job suspend/resume will reset the job's priority and make
resources exclusively held by the job available to other jobs.
-- Fix possible invalid memory reference in sched/backfill. Patch by Andriy
Grytsenko (Massive Solutions Limited).
-- Add select_jobinfo to the task launch RPC. Based upon patch by Andriy
Grytsenko (Massive Solutions Limited).
-- Add DefMemPerCPU/Node and MaxMemPerCPU/Node to partition configuration.
This improves flexibility when gang scheduling only specific partitions.
-- Added new enums to print out when a job is held by a QOS instead of an
association limit.
-- Enhancements to sched/backfill performance with select/cons_res plugin.
Patch from Bjørn-Helge Mevik, University of Oslo.
-- Correct job run time reported by smap for suspended jobs.
-- Improve job preemption logic to avoid preempting more jobs than needed.
-- Add contribs/arrayrun tool providing support for job arrays. Contributed by
Bjørn-Helge Mevik, University of Oslo. NOTE: Not currently packaged as RPM
and manual file editing is required.
-- When suspending a job, wait 2 seconds instead of 1 second between sending
SIGTSTP and SIGSTOP. Some MPI implementation were not stopping within the
1 second delay.
-- Add support for managing devices based upon Linux cgroup container. Based
upon patch by Yiannis Georgiou, Bull.
-- Fix memory buffering bug if a AllowGroups parameter of a partition has 100
or more users. Patch by Andriy Grytsenko (Massive Solutions Limited).
-- Fix bug in generic resource tracking of gres associated with specific CPUs.
Resources were being over-allocated.
-- On systems with front-end nodes (IBM BlueGene and Cray) limit batch jobs to
only one CPU of these shared resources.
-- Set SLURM_MEM_PER_CPU or SLURM_MEM_PER_NODE environment variables for both
interactive (salloc) and batch jobs if the job has a memory limit. For Cray
systems also set CRAY_AUTO_APRUN_OPTIONS environment variable with the
memory limit.
-- Fix bug in select/cons_res task distribution logic when tasks-per-node=0.
Patch from Rod Schultz, Bull.
-- Restore node configuration information (CPUs, memory, etc.) for powered
down when slurmctld daemon restarts rather than waiting for the node to be
restored to service and getting the information from the node (NOTE: Only
relevent if FastSchedule=0).
-- For Cray systems with the srun2aprun wrapper, rebuild the srun man page
identifying the srun optioins which are valid on that system.
-- BlueGene: Permit users to specify a separate connection type for each
dimension (e.g. "--conn-type=torus,mesh,torus").
-- Add the ability for a user to limit the number of leaf switches in a job's
allocation using the --switch option of salloc, sbatch and srun. There is
also a new SchedulerParameters value of max_switch_wait, which a SLURM
administrator can used to set a maximum job delay and prevent a user job
from blocking lower priority jobs for too long. Based on work by Rod
Schultz, Bull.
* Changes in SLURM 2.3.0.pre6
=============================
-- NOTE: THERE HAS BEEN A NEW FIELD ADDED TO THE CONFIGURATION RESPONSE RPC
AS SHOWN BY "SCONTROL SHOW CONFIG". THIS FUNCTION WILL ONLY WORK WHEN THE
SERVER AND CLIENT ARE BOTH RUNNING SLURM VERSION 2.3.0.pre6
-- Modify job expansion logic to support licenses, generic resources, and
currently running job steps.
-- Added an rpath if using the --with-munge option of configure.
-- Add support for multiple sets of DEFAULT node, partition, and frontend
specifications in slurm.conf so that default values can be changed mulitple
times as the configuration file is read.
Danny Auble
committed
-- BLUEGENE - Improved logic to place small blocks in free space before freeing
larger blocks.
-- Add optional argument to srun's --kill-on-bad-exit so that user can set
its value to zero and override a SLURM configuration parameter of
KillOnBadExit.
-- Fix bug in GraceTime support for preempted jobs that prevented proper
operation when more than one job was being preempted. Based on patch from
Bill Brophy, Bull.
-- Fix for running sview from a non-bluegene cluster to a bluegene cluster.
Regression from pre5.
-- If job's TMPDIR environment is not set or is not usable, reset to "/tmp".
Patch from Andriy Grytsenko (Massive Solutions Limited).
-- Remove logic for defunct RPC: DBD_GET_JOBS.
-- Propagate DebugFlag changes by scontrol to the plugins.
-- Improve accuracy of REQUEST_JOB_WILL_RUN start time with respect to higher
priority pending jobs.
-- Add -R/--reservation option to squeue command as a job filter.
-- Add scancel support for --clusters option.
-- Note that scontrol and sprio can only support a single cluster at one time.
-- Add support to salloc for a new environment variable SALLOC_KILL_CMD.
-- Add scontrol ability to increment or decrement a job or step time limit.
-- Add support for SLURM_TIME_FORMAT environment variable to control time
stamp output format. Work by Gerrit Renker, CSCS.
-- Fix error handling in mvapich plugin that could cause srun to enter an
infinite loop under rare circumstances.
-- Add support for multiple task plugins. Patch from Andriy Grytsenko (Massive
Solutions Limited).
-- Addition of per-user node/cpu limits for QOS's. Patch from Aaron Knister,
UMBC.
-- Fix logic for multiple job resize operations.
-- BLUEGENE - many fixes to make things work correctly on a L/P system.
-- Fix bug in layout of job step with --nodelist option plus node count. Old
code could allocate too few nodes.
* Changes in SLURM 2.3.0.pre5
=============================
-- NOTE: THERE HAS BEEN A NEW FIELD ADDED TO THE JOB STATE FILE. UPGRADES FROM
VERSION 2.3.0-PRE4 WILL RESULT IN LOST JOBS UNLESS THE "orig_dependency"
FIELD IS REMOVED FROM JOB STATE SAVE/RESTORE LOGIC. ON CRAY SYSTEMS A NEW
"confirm_cookie" FIELD WAS ADDED AND HAS THE SAME EFFECT OF DISABLING JOB
STATE RESTORE.
-- BLUEGENE - Improve speed of start up when removing blocks at the beginning.
-- Correct init.d/slurm status to have non-zero exit code if ANY Slurm
damon that should be running on the node is not running. Patch from Rod
Schulz, Bull.
-- Improve accuracy of response to "srun --test-only jobid=#".
-- Fix bug in front-end configurations which reports job_cnt_comp underflow
errors after slurmctld restarts.
-- Eliminate "error from _trigger_slurmctld_event in backup.c" due to lack of
event triggers.
-- Fix logic in BackupController to properly recover front-end node state and
avoid purging active jobs.
-- Added man pages to html pages and the new cpu_management.html page.
Submitted by Martin Perry / Rod Schultz, Bull.
-- Job dependency information will only show the currently active dependencies
rather than the original dependencies. From Dan Rusak, Bull.
-- Add RPCs to get the SPANK environment variables from the slurmctld daemon.
Patch from Andrej N. Gritsenko.
-- Updated plugins/task/cgroup/task_cgroup_cpuset.c to support newer
HWLOC_API_VERSION.
-- Do not build select/bluegene plugin if C++ compiler is not installed.
-- Add new configure option --with-srun2aprun to build an srun command
which is a wrapper over Cray's aprun command and supports many srun
options. Without this option, the srun command will advise the user
to use the aprun command.
-- Change container ID supported by proctrack plugin from 32-bit to 64-bit.
-- Added contribs/cray/libalps_test_programs.tar.gz with tools to validate
SLURM's logic used to support Cray systems.
-- Create RPM for srun command that is a wrapper for the Cray/ALPS aprun
command. Dependent upon .rpmmacros parameter of "%_with_srun2aprun".
-- Add configuration parameter MaxStepCount to limit effect of bad batch
scripts.
-- Fix for handling a 2.3 system talking to a 2.2 slurmctld.
-- Add contribs/lua/job_submit.license.lua script. Update job_submit and Lua
related documentation.
-- Test if _make_batch_script() is called with a NULL script.
-- Increase hostlist support from 24k to 64k nodes.
-- Renamed the Accounting Storage database's "DerivedExitString" job field to
"Comment". Provided backward compatible support for "DerivedExitString" in
the sacctmgr tool.
-- Added the ability to save the job's comment field to the Accounting
Storage db (to the formerly named, "DerivedExitString" job field). This
behavior is enabled by a new slurm.conf parameter:
AccountingStoreJobComment.
-- Test if _make_batch_script() is called with a NULL script.
-- Increase hostlist support from 24k to 64k nodes.
-- Fix srun to handle signals correctly when waiting for a step creation.
-- Preserve the last job ID across slurmctld daemon restarts even if the job
state file can not be fully recovered.
Danny Auble
committed
-- Made the hostlist functions be able to arbitrarily handle any size
dimension no matter what the size of the cluster is in dimensions.
* Changes in SLURM 2.3.0.pre4
=============================
-- Add GraceTime to Partition and QOS data structures. Preempted jobs will be
given this time interval before termination. Work by Bill Brophy, Bull.
-- Add the ability for scontrol and sview to modify slurmctld DebugFlags
values.
-- Various Cray-specific patches:
- Fix a bug in distinguishing XT from XE.
- Avoids problems with empty nodenames on Cray.
- Check whether ALPS is hanging on to nodes, which happens if ALPS has not
yet cleaned up the node partition.
- Stops select/cray from clobbering node_ptr->reason.
- Perform 'safe' release of ALPS reservations using inventory and apkill.
- Compile-time sanity check for the apbasil and apkill files.
- Changes error handling in do_basil_release() (called by
select_g_job_fini()).
- Warn that salloc --no-shell option is not supported on Cray systems.
-- Add a reservation flag of "License_Only". If set, then jobs using the
reservation may use the licenses associated with it plus any compute nodes.
Otherwise the job is limited to the compute nodes associated with the
reservation.
-- Change slurm.conf node configuration parameter from "Procs" to "CPUs".
Both parameters will be supported for now.
Danny Auble
committed
-- BLUEGENE - fix for when user requests only midplane names with no count at
job submission time to process the node count correctly.
-- Fix job step resource allocation problem when both node and tasks counts
are specified. New logic selects nodes with larger CPU counts as needed.
Danny Auble
committed
-- BGQ - make it so srun wraps runjob (still under construction, but works
for most cases)
-- Permit a job's QOS and Comment field to both change in a single RPC. This
was previously disabled since Moab stored the QOS within the Comment field.
-- Add support for jobs to expand in size. Submit additional batch job with
the option "--dependency=expand:<jobid>". See web page "faq.html#job_size"
for details. Restrictions to be removed in the future.
Danny Auble
committed
-- Added --with-alps-emulation to configure, and also an optional cray.conf
to setup alps location and database information.
-- Modify PMI data types from 16-bits to 32-bits in order to support MPICH2
jobs with more than 65,536 tasks. Patch from Hongjia Cao, NUDT.
-- Set slurmd's soft process CPU limit equal to it's hard limit and notify the
user if the limit is not infinite.
-- Added proctrack/cgroup and task/cgroup plugins from Matthieu Hautreux, CEA.
-- Fix slurmctld restart logic that could leave nodes in UNKNOWN state for a
longer time than necessary after restart.
* Changes in SLURM 2.3.0.pre3
=============================
-- BGQ - Appears to work correctly in emulation mode, no sub blocks just yet.
-- Minor typos fixed
-- Various bug fixes for Cray systems.
-- Fix bug that when setting a compute node to idle state, it was failing to
set the systems up_node_bitmap.
-- BLUEGENE - code reorder
-- BLUEGENE - Now only one select plugin for all Bluegene systems.
-- Modify srun to set the SLURM_JOB_NAME environment variable when srun is
used to create a new job allocation. Not set when srun is used to create a
job step within an existing job allocation.
-- Modify init.d/slurm script to start multiple slurmd daemons per compute
node if so configured. Patch from Matthieu Hautreux, CEA.
-- Change license data structure counters from uint16_t to uint32_t to support
larger license counts.
* Changes in SLURM 2.3.0.pre2
=============================
-- Log a job's requeue or cancellation due to preemption to that job's stderr:
"*** JOB 65547 CANCELLED AT 2011-01-21T12:59:33 DUE TO PREEMPTION ***".
-- Added new job termination state of JOB_PREEMPTED, "PR" or "PREEMPTED" to
indicate job termination was due to preemption.
-- Optimize advanced reservations resource selection for computer topology.
The logic has been added to select/linear and select/cons_res, but will
not be enabled until the other select plugins are modified.
-- Disable deletion of partitions that have unfinished jobs (pending,
running or suspended states). Patch from Martin Perry, BULL.
-- In sview, disable the sorting of node records by name at startup for
clusters over 1000 nodes. Users can enable this by selecting the "Name"
tab. This change dramatically improves scalability of sview.
-- Report error when trying to change a node's state from scontrol for Cray
-- Do not attempt to read the batch script for non-batch jobs. This patch
eliminates some inappropriate error messages.
-- Preserve NodeHostName when reordering nodes due to system topology.
-- On Cray/ALPS systems do node inventory before scheduling jobs.
-- Disable some salloc options on Cray systems.
-- Disable scontrol's wait_job command on Cray systems.
-- Disable srun command on native Cray/ALPS systems.
Danny Auble
committed
-- Updated configure option "--enable-cray-emulation" (still under
development) to emulate a cray XT/XE system, and auto-detect a real
Cray XT/XE systems (removed no longer needed --enable-cray configure
option). Building on native Cray systems requires the
cray-MySQL-devel-enterprise rpm and expat XML parser library/headers.
* Changes in SLURM 2.3.0.pre1
=============================
-- Added that when a slurmctld closes the connection to the database it's
registered host and port are removed.
-- Added flag to slurmdbd.conf TrackSlurmctldDown where if set will mark idle
resources as down on a cluster when a slurmctld disconnects or is no
longer reachable.
-- Added support for more than one front-end node to run slurmd on
architectures where the slurmd does not execute on the compute nodes
(e.g. BlueGene). New configuration parameters FrontendNode and FrontendAddr
added. See "man slurm.conf" for more information.
-- With the scontrol show job command when using the --details option, show
a batch job's script.
-- Add ability to create reservations or partitions and submit batch jobs
using sview. Also add the ability to delete reservations and partitions.
-- Added new configuration parameter MaxJobId. Once reached, restart job ID
values at FirstJobId.
-- When restarting slurmctld with priority/basic, increment all job priorities
so the highest job priority becomes TOP_PRIORITY.
-- Prevent background salloc disconnecting terminal at termination. Patch by
Don Albert, Bull.
-- Fixed issue where preempt mode is skipped when creating a QOS. Patch by
Bill Brophy, Bull.
-- Fixed documention (html) for PriorityUsageResetPeriod to match that in the
man pages. Patch by Nancy Kritkausky, Bull.
* Changes in SLURM 2.2.7
========================
-- Eliminate zombie process created if salloc exits with stopped child
process. Patch from Gerrit Renker, CSCS.
-- With default configuration on non-Cray systems, enable salloc to be
spawned as a background process. Based upon work by Don Albert (Bull) and
Gerrit Renker (CSCS).
-- Fixed Regression from 2.2.4 in accounting where an inherited limit
would not be set correctly in the added child association.
-- Fixed issue with accounting when asking for jobs with a hostlist.
-- Avoid clearing a node's Arch, OS, BootTime and SlurmdStartTime when
"scontrol reconfig" is run. Patch from Martin Perry, Bull.
* Changes in SLURM 2.2.6
========================
-- Fix displaying of account coordinators with sacctmgr. Possiblity to show
deleted accounts. Only a cosmetic issue, since the accounts are already
deleted, and have no associations.
-- Prevent opaque ncurses WINDOW struct on OS X 10.6.
Danny Auble
committed
-- Fix issue with accounting when using PrivateData=jobs... users would not be
able to view there own jobs unless they were admin or coordinators which is
obviously wrong.
-- Fix bug in node stat if slurmctld is restarted while nodes are in the
process of being powered up. Patch from Andriy Grytsenko.
-- Change maximum batch script size from 128k to 4M.
-- Get slurmd -f option working. Patch from Andriy Grytsenko.
-- Fix for linking problem on OSX. Patches from Jon Bringhurst (LANL) and
Tyler Strickland.
-- Reset a job's priority to zero (suspended) when Moab requeues the job.
Patch from Par Andersson, NSC.
Danny Auble
committed
-- When enforcing accounting, fix polling for unknown uids for users after
the slurmctld started. Previously one would have to issue a reconfigure
to the slurmctld to have it look for new uids.
-- BLUEGENE - if a block goes into an error state. Fix issue where accounting
wasn't updated correctly when the block was resumed.
-- Synchronize power-save module better with scheduler. Patch from
Andriy Grytsenko (Massive Solutions Limited).
-- Avoid SEGV in association logic with user=NULL. Patch from
Andriy Grytsenko (Massive Solutions Limited).
-- Fixed issue in accounting where it was possible for a new
association/wckey to be set incorrectly as a default the new object
was added after an original default object already existed. Before
the slurmctld would need to be restarted to fix the issue.
-- Updated the Normalized Usage section in priority_multifactor.shtml.
-- Disable use of SQUEUE_FORMAT env var if squeue -l, -o, or -s option is
used. Patch from Aaron Knister (UMBC).
* Changes in SLURM 2.2.5
========================
-- Correct init.d/slurm status to have non-zero exit code if ANY Slurm
damon that should be running on the node is not running. Patch from Rod
Schulz, Bull.
-- Improve accuracy of response to "srun --test-only jobid=#".
-- Correct logic to properly support --ntasks-per-node option in the
select/cons_res plugin. Patch from Rod Schulz, Bull.
-- Fix bug in select/cons_res with respect to generic resource (gres)
scheduling which prevented some jobs from starting as soon as possible.
-- Fix memory leak in select/cons_res when backfill scheduling generic
resources (gres).
Danny Auble
committed
-- Fix for when configuring a node with more resources than in real life
and using task/affinity.
Danny Auble
committed
-- Fix so slurmctld will pack correctly 2.1 step information. (Only needed if
a 2.1 client is talking to a 2.2 slurmctld.)
-- Set powered down node's state to IDLE+POWER after slurmctld restart instead
of leaving in UNKNOWN+POWER. Patch from Andrej Gritsenko.
-- Fix bug where is srun's executable is not on it's current search path, but
can be found in the user's default search path. Modify slurmstepd to find
the executable. Patch from Andrej Gritsenko.
-- Make sview display correct cpu count for steps.
Danny Auble
committed
-- BLUEGENE - when running in overlap mode make sure to check the connection
type so you can create overlapping blocks on the exact same nodes with
different connection types (i.e. one torus, one mesh).
-- Fix memory leak if MPI ports are reserved (for OpenMPI) and srun's
--resv-ports option is used.
-- Fix some anomalies in select/cons_res task layout when using the
--cpus-per-task option. Patch from Martin Perry, Bull.
-- Improve backfill scheduling logic when job specifies --ntasks-per-node and
--mem-per-cpu options on a heterogeneous cluster. Patch from Bjorn-Helge
Mevik, University of Oslo.
-- Print warning message if srun specifies --cpus-per-task larger than used
to create job allocation.
-- Fix issue when changing a users name in accounting, if using wckeys would
execute correctly, but bad memcopy would core the DBD. No information
would be lost or corrupted, but you would need to restart the DBD.
* Changes in SLURM 2.2.4
========================
-- For batch jobs for which the Prolog fails, substitute the job ID for any
"%j" in the job's output or error file specification.
-- Add licenses field to the sview reservation information.
-- BLUEGENE - Fix for handling extremely overloaded system on Dynamic system
dealing with starting jobs on overlapping blocks. Previous fallout
was job would be requeued. (happens very rarely)
-- In accounting_storage/filetxt plugin, substitute spaces within job names,
step names, and account names with an underscore to insure proper parsing.
-- When building contribs/perlapi ignore both INSTALL_BASE and PERL_MM_OPT.
Use PREFIX instead to avoid build errors from multiple installation
specifications.
-- Add job_submit/cnode plugin to support resource reservations of less than
a full midplane on BlueGene computers. Treat cnodes as liceses which can
be reserved and are consumed by jobs. This reservation mechanism for less
than an entire midplane is still under development.
-- Clear a job's "reason" field when a held job is released.
-- When releasing a held job, calculate a new priority for it rather than
just setting the priority to 1.
Danny Auble
committed
-- Fix for sview started on a non-bluegene system to pick colors correctly
when talking to a real bluegene system.
-- Improve sched/backfill's expected start time calculation.
-- Prevent abort of sacctmgr for dump command with invalid (or no) filename.
Danny Auble
committed
-- Improve handling of job updates when using limits in accounting, and
updating jobs as a non-admin user.
-- Fix for "squeue --states=all" option. Bug would show no jobs.
-- Schedule jobs with reservations before those without reservations.
-- Fix squeue/scancel to query correctly against accounts of different case.
-- Abort an srun command when it's associated job gets aborted due to a
dependency that can not be satisfied.
-- In jobcomp plugins, report start time of zeroif pending job is cancelled.
Previously may report expected start time.
-- Fixed sacctmgr man to state correct variables.
-- Select nodes based upon their Weight when job allocation requests include
a constraint field with a count (e.g. "srun --constraint=gpu*2 -N4 a.out").
-- Add support for user names that are entirely numeric and do not treat them
as UID values. Patch from Dennis Leepow.
-- Patch to un/pack double values properly if negative value. Patch from
Danny Auble
committed
Dennis Leepow
-- Do not reset a job's priority when requeued or suspended.
-- Fix problemm that could let new jobs start on a node in DRAINED state.
Danny Auble
committed
-- Fix cosmetic sacctmgr issue where if the user you are trying to add
doesn't exist in the /etc/passwd file and the account you are trying
to add them to doesn't exist it would print (null) instead of the bad
account name.
-- Fix associations/qos for when adding back a previously deleted object
the object will be cleared of all old limits.
Danny Auble
committed
-- BLUEGENE - Added back a lock when creating dynamic blocks to be more thread
safe on larger systems with heavy load.
* Changes in SLURM 2.2.3
========================
-- Update srun, salloc, and sbatch man page description of --distribution
option. Patches from Rod Schulz, Bull.
-- Applied patch from Martin Perry to fix "Incorrect results for task/affinity
block second distribution and cpus-per-task > 1" bug.
-- Avoid setting a job's eligible time while held (priority == 0).
-- Substantial performance improvement to backfill scheduling. Patch from
Bjorn-Helge Mevik, University of Oslo.
-- Make timeout for communications to the slurmctld be based upon the
MessageTimeout configuration parameter rather than always 3 seconds.
Patch from Matthieu Hautreux, CEA.
-- Add new scontrol option of "show aliases" to report every NodeName that is
associated with a given NodeHostName when running multiple slurmd daemons
per compute node (typically used for testing purposes). Patch from
Matthieu Hautreux, CEA.
-- Fix for handling job names with a "'" in the name within MySQL accounting.
Patch from Gerrit Renker, CSCS.
-- Modify condition under which salloc execution delayed until moved to the
foreground. Patch from Gerrit Renker, CSCS.
Job control for interactive salloc sessions: only if ...
a) input is from a terminal (stdin has valid termios attributes),
b) controlling terminal exists (non-negative tpgid),
c) salloc is not run in allocation-only (--no-shell) mode,
d) salloc runs in its own process group (true in interactive
shells that support job control),
e) salloc has been configured at compile-time to support background
execution and is not currently in the background process group.
-- Abort salloc if no controlling terminal and --no-shell option is not used
("setsid salloc ..." is disabled). Patch from Gerrit Renker, CSCS.
-- Fix to gang scheduling logic which could cause jobs to not be suspended
or resumed when appropriate.
-- Applied patch from Martin Perry to fix "Slurmd abort when using task
affinity with plane distribution" bug.
-- Applied patch from Yiannis Georgiou to fix "Problem with cpu binding to
sockets option" behaviour. This change causes "--cpu_bind=sockets" to bind
tasks only to the CPUs on each socket allocated to the job rather than all
CPUs on each socket.
-- Advance daily or weekly reservations immediately after termination to avoid
having a job start that runs into the reservation when later advanced.
-- Fix for enabling users to change there own default account, wckey, or QOS.
Danny Auble
committed
-- BLUEGENE - If using OVERLAP mode fixed issue with multiple overlapping
blocks in error mode.
-- Fix for sacctmgr to display correctly default accounts.
-- scancel -s SIGKILL will always sent the RPC to the slurmctld rather than
the slurmd daemon(s). This insures that tasks in the process of getting
spawned are killed.
-- BLUEGENE - If using OVERLAP mode fixed issue with jobs getting denied
at submit if the only option for their job was overlapping a block in
error state.
* Changes in SLURM 2.2.2
========================
-- Correct logic to set correct job hold state (admin or user) when setting
the job's priority using scontrol's "update jobid=..." rather than its
"hold" or "holdu" commands.
-- Modify squeue to report unset --mincores, --minthreads or --extra-node-info
values as "*" rather than 65534. Patch from Rod Schulz, BULL.
-- Report the StartTime of a job as "Unknown" rather than the year 2106 if its
expected start time was too far in the future for the backfill scheduler
to compute.
-- Prevent a pending job reason field from inappropriately being set to
"Priority".
-- In sched/backfill with jobs having QOS_FLAG_NO_RESERVE set, then don't
consider the job's time limit when attempting to backfill schedule. The job
will just be preempted as needed at any time.
-- Eliminated a bug in sbatch when no valid target clusters are specified.
-- When explicitly sending a signal to a job with the scancel command and that
job is in a pending state, then send the request directly to the slurmctld
daemon and do not attempt to send the request to slurmd daemons, which are
not running the job anyway.
-- In slurmctld, properly set the up_node_bitmap when setting it's state to
IDLE (in case the previous node state was DOWN).
Danny Auble
committed
-- Fix smap to process block midplane names correctly when on a bluegene
system.
-- Fix smap to once again print out the Letter 'ID' for each line of a block/
partition view.
-- Corrected the NOTES section of the scancel man page
Danny Auble
committed
-- Fix for accounting_storage/mysql plugin to correctly query cluster based
transactions.
-- Fix issue when updating database for clusters that were previously deleted
before upgrade to 2.2 database.
-- BLUEGENE - Handle mesh torus check better in dynamic mode.
Danny Auble
committed
-- BLUEGENE - Fixed race condition when freeing block, most likely only would
happen in emulation.
-- Fix for calculating used QOS limits correctly on a slurmctld reconfig.
-- BLUEGENE - Fix for bad conn-type set when running small blocks in HTC mode.
-- If salloc's --no-shell option is used, then do not attempt to preserve the
terminal's state.
Moe Jette
committed
-- Add new SLURM configure time parameter of --disable-salloc-background. If
set, then salloc can only execute in the foreground. If started in the
background, then a message will be printed and the job allocation halted
until brought into the foreground.
NOTE: THIS IS A CHANGE IN DEFAULT SALLOC BEHAVIOR FROM V2.2.1, BUT IS
CONSISTENT WITH V2.1 AND EARLIER.
-- Added the Multi-Cluster Operation web page.
-- Removed remnant code for enforcing max sockets/cores/threads in the
cons_res plugin (see last item in 2.1.0-pre5). This was responsible
for a bug reported by Rod Schultz.
Danny Auble
committed
-- BLUEGENE - Set correct env vars for HTC mode on a P system to get correct
block.
-- Correct RunTime reported by "scontrol show job" for pending jobs.
Danny Auble
committed
* Changes in SLURM 2.2.1
========================
-- Fix setting derived exit code correctly for jobs that happen to have the
same jobid.
-- Better checking for time overflow when rolling up in accounting.
-- Add scancel --reservation option to cancel all jobs associated with a
specific reservation.
-- Treat reservation with no nodes like one that starts later (let jobs of any
size get queued and do not block any pending jobs).
-- Fix bug in gang scheduling logic that would temporarily resume to many jobs
after a job completed.
-- Change srun message about job step being deferred due to SlurmctldProlog
running to be more clear and only print when --verbose option is used.
Danny Auble
committed
-- Made it so you could remove the hold on jobs with sview by setting the
priority to infinite.
-- BLUEGENE - better checking small blocks in dynamic mode whether a full
midplane job could run or not.
-- Decrease the maximum sleep time between srun job step creation retry
attempts from 60 seconds to 29 seconds. This should eliminate a possible
synchronization problem with gang scheduling that could result in job
Danny Auble
committed
step creation requests only occuring when a job is suspended.
-- Fix to prevent changing a held job's state from HELD to DEPENDENCY
until the job is released. Patch from Rod Schultz, Bull.
-- Fixed sprio -M to reflect PriorityWeight values from remote cluster.
-- Fix bug in sview when trying to update arbitrary field on more than one
job. Formerly would display information about one job, but update next
selected job.
Danny Auble
committed
-- Made it so QOS with UsageFactor set to 0 would make it so jobs running
under that QOS wouldn't add time to fairshare or association/qos
limits.
Danny Auble
committed
-- Fixed issue where QOS priority wasn't re-normalized until a slurmctld
restart when a QOS priority was changed.
Danny Auble
committed
-- Fix sprio to use calculated numbers from slurmctld instead of
calulating it own numbers.
Danny Auble
committed
-- BLUEGENE - fixed race condition with preemption where if the wind blows the
right way the slurmctld could lock up when preempting jobs to run others.
Danny Auble
committed
-- BLUEGENE - fixed epilog to wait until MMCS job is totally complete before
finishing.
-- BLUEGENE - more robust checking for states when freeing blocks.
-- Added correct files to the slurm.spec file for correct perl api rpm
creation.
-- Added flag "NoReserve" to a QOS to make it so all jobs are created equal
within a QOS. So if larger, higher priority jobs are unable to run they
don't prevent smaller jobs from running even if running the smaller
jobs delay the start of the larger, higher priority jobs.
Danny Auble
committed
-- BLUEGENE - Check preemptees one by one to preempt lower priority jobs first
instead of first fit.
-- In select/cons_res, correct handling of the option
SelectTypeParameters=CR_ONE_TASK_PER_CORE.
Danny Auble
committed
-- Fix for checking QOS to override partition limits, previously if not using
QOS some limits would be overlooked.
-- Fix bug which would terminate a job step if any of the nodes allocated to
it were removed from the job's allocation. Now only the tasks on those
nodes are terminated.
-- Fixed issue when using a storage_accounting plugin directly without the
slurmDBD updates weren't always sent correctly to the slurmctld, appears to
OS dependent, reported by Fredrik Tegenfeldt.
Danny Auble
committed
* Changes in SLURM 2.2.0
========================
-- Change format of Duration field in "scontrol show reservation" output from
an integer number of minutes to "[days-]hours:minutes:seconds".
-- Add support for changing the reservation of pending or running jobs.
-- On Cray systems only, salloc sends SIGKILL to spawned process group when
job allocation is revoked. Patch from Gerrit Renker, CSCS.
Danny Auble
committed
-- Fix for sacctmgr to work correctly when modifying user associations where
all the associations contain a partition.
-- Minor mods to salloc signal handling logic: forwards more signals and
releases allocation on real-time signals. Patch from Gerrit Renker, CSCS.
-- Add salloc logic to preserve tty attributes after abnormal exit. Patch
from Mark Grondona, LLNL.
-- BLUEGENE - Fix for issue in dynamic mode when trying to create a block
overlapping a block with no job running on it but in configuring state.
-- BLUEGENE - Speedup by skipping blocks that are deallocating for other jobs
when starting overlapping jobs in dynamic mode.
-- Fix for sacct --state to work correctly when not specifying a start time.
-- Fix upgrade process in accounting from 2.1 for clusters named "cluster".
-- Export more jobacct_common symbols needed for the slurm api on some systems.
* Changes in SLURM 2.2.0.rc4
============================
-- Correction in logic to spread out over time highly parallel messages to
minimize lost messages. Effects slurmd epilog complete messages and PMI
key-pair transmissions. Patch from Gerrit Renker, CSCS.
-- Fixed issue where if a system has unset messages to the dbd in 2.1 and
upgrades to 2.2. Messages are now processed correctly now.
-- Fixed issue where assoc_mgr cache wasn't always loaded correctly if the
slurmdbd wasn't running when the slurmctld was started.
Danny Auble
committed
-- Make sure on a pthread create in step launch that the error code is looked
at. Improves fault-tolerance of slurmd.
-- Fix setting up default acct/wckey when upgrading from 2.1 to 2.2.
-- Fix issue with associations attached to a specific partition with no other
association, and requesting a different partition.
-- Added perlapi to the slurmdb to the slurm.spec.
-- In sched/backfill, correct handling of CompleteWait parameter to avoid
backfill scheduling while a job is completing. Patch from Gerrit Renker,
CSCS.
-- Send message back to user when trying to launch job on computing lacking
that user ID. Patch from Hongjia Cao, NUDT.
-- BLUEGENE - Fix it so 1 midplane clusters will run small block jobs.
-- Add Command and WorkDir to the output of "scontrol show job" for job
allocations created using srun (not just sbatch).
-- Fixed sacctmgr to not add blank defaultqos' when doing a cluster dump.
-- Correct processing of memory and disk space specifications in the salloc,
sbatch, and srun commands to work properly with a suffix of "MB", "GB",
etc. and not only with a single letter (e.g. "M", "G", etc.).
-- Prevent nodes with suspended jobs from being powered down by SLURM.
-- Normalized the way pidfile are created by the slurm daemons.
Danny Auble
committed
-- Fixed modifying the root association to no read in it's last value
when clearing a limit being set.
-- Revert some resent signal handling logic from salloc so that SIGHUP sent
after the job allocation will properly release the allocation and cause
salloc to exit.
-- BLUEGENE - Fix for recreating a block in a ready state.
-- Fix debug flags for incorrect logic when dealing with DEBUG_FLAG_WIKI.
-- Report reservation's Nodes as a hostlist expression of all nodes rather
than using "ALL".
-- Fix reporting of nodes in BlueGene reservation (was reporting CPU count
rather than cnode count in scontrol output for NodeCnt field).
* Changes in SLURM 2.2.0.rc3
============================
-- Modify sacctmgr command to accept plural versions of options (e.g. "Users"
in addition to "User"). Patch from Don Albert, BULL.
Danny Auble
committed
-- BLUEGENE - make it so reset of boot counter happens only on state change
and not when a new job comes along.
-- Modify srun and salloc signal handling so they can be interrupted while
waiting for an allocation. This was broken in version 2.2.0.rc2.
-- Fix NULL pointer reference in sview. Patch from Gerrit Renker, CSCS.
-- Fix file descriptor leak in slurmstepd on spank_task_post_fork() failure.
Patch from Gerrit Renker, CSCS.
-- Fix bug in preserving job state information when upgrading from SLURM
version 2.1. Bug introduced in version 2.2.0-pre10. Patch from Par
Andersson, NSC.
Danny Auble
committed
-- Fix bug where if using the slurmdbd if a job wasn't able to start right
away some accounting information may be lost.
Danny Auble
committed
-- BLUEGENE - when a prolog failure happens the offending block is put in
an error state.
-- Changed the last column heading of the sshare output from "FS Usage" to
"FairShare" and added more detail to the sshare man page.
-- Fix bug in enforcement of reservation by account name. Used wrong index
into an array. Patch from Gerrit Renker, CSCS.
-- Modify job_submit/lua plugin to treat any non-zero return code from the
job_submit and job_modify functions as an error and the user request should
-- Fix bug which would permit pending job to be started on completing node
when job preemption is configured.
* Changes in SLURM 2.2.0.rc2
============================
-- Fix memory leak in job step allocation logic. Patch from Hongjia Cao, NUDT.
-- If a preempted job was submitted with the --no-requeue option then cancel
rather than requeue it.
Danny Auble
committed
-- Fix for problems when adding a user for the first time to a new cluster
with a 2.1 sacctmgr without specifying a default account.
-- Resend TERMINATE_JOB message only to nodes that the job still has not
terminated on. Patch from Hongjia Cao, NUDT.
-- Treat time limit specification of "0:300" as a request for 300 seconds
(5 minutes) instead of one minute.
-- Modify sched/backfill plugin logic to continue working its way down the
queue of jobs rather than restarting at the top if there are no changes in
job, node, or partition state between runs. Patch from Hongjia Cao, NUDT.
-- Improve scalability of select/cons_res logic. Patch from Matthieu Hautreux,
CEA.
Danny Auble
committed
-- Fix for possible deadlock in the slurmstepd when cancelling a job that is
also writing a large amount of data to stderr.
-- Fix in select/cons_res to eliminate "mem underflow" error when the
slurmctld is reconfigured while a job is in completing state.
-- Send a message to the a user's job when it's real or virual memory limit
is exceeded. :
Danny Auble
committed
-- Apply rlimits right before execing the users task so to lower the risk of
the task exiting because the slurmstepd ran over a limit (log file size,
etc.)
-- Add scontrol command of "uhold <job_id>" so that an administrator can hold
a job and let the job's owner release it. The scontrol command of
"hold <job_id>" when executed by a SLURM administrator can only be released
by a SLURM administrator and not the job owner.
-- Change atoi to slurm_atoul in mysql plugin, needed for running on 32-bit
systems in some cases.
-- If a batch job is found to be missing from a node, make its termination
state be NODE_FAIL rather than CANCELLED.
Danny Auble
committed
-- Fatal error put back if running a bluegene or cray plugin from a controller
not of that type.
Danny Auble
committed
-- Make sure jobacct_gather plugin is not shutdown before messing with the
proccess list.
Moe Jette
committed
-- Modify signal handling in srun and salloc commands to avoid deadlock if the
malloc function is interupted and called again. The malloc function is
thread safe, but not reentrant, which is a problem when signal handling if
Moe Jette
committed
the malloc function itself has a lock. Problem fixed by moving signal
handling in those commands to a new pthread.
-- In srun set job abort flag on completion to handle the case when a user
cancels a job while the node is not responding but slurmctld has not yet
the node down. Patch from Hongjia Cao, NUDT.
-- Streamline the PMI logic if no duplicate keys are included in the key-pairs
managed. Substantially improves performance for large numbers of tasks.
Adds support for SLURM_PMI_KVS_NO_DUP_KEYS environment variable. Patch
from Hongjia Cao, NUDT.
Danny Auble
committed
-- Fix issues with sview dealing with older versions of sview and saving
defaults.
-- Remove references to --mincores, --minsockets, and --minthreads from the
salloc, sbatch and srun man pages. These options are defunct, Patch from
Rod Schultz, Bull.
Danny Auble
committed
-- Made openssl not be required to build RPMs, it is not required anymore
since munge is the default crypto plugin.
Danny Auble
committed
-- sacctmgr now has smarts to figure out if a qos is a default qos when
modifing a user/acct or removing a qos.
-- For reservations on BlueGene systems, set and report c-node counts rather
than midplane counts.
* Changes in SLURM 2.2.0.rc1
============================
-- Add show_flags parameter to the slurm_load_block_info() function.
-- perlapi has been brought up to speed courtesy of Hongjia Coa. (make sure to
run 'make clean' if building in a different dir than source)
-- Fixed regression in pre12 in crypto/munge when running with
--enable-multiple-slurmd which would cause the slurmd's to core.
-- Fixed regression where cpu count wasn't figured out correctly for steps.
-- Fixed issue when using old mysql that can't handle a '.' in the table
name.
-- Mysql plugin works correctly without the SlurmDBD
Danny Auble
committed
-- Added ability to query batch step with sstat. Currently no accounting data
is stored for the batch step, but the internals are inplace if we decide to
do that in the future.
-- Fixed some backwards compatibility issues with 2.2 talking to 2.1.
Danny Auble
committed
-- Fixed regression where modifying associations didn't get sent to the
slurmctld.
-- Made sshare sort things the same way saccmgr list assoc does
(alphabetically)
-- Fixed issue with default accounts being set up correctly.
Danny Auble
committed
-- Changed sortting in the slurmctld so sshare output is similar to that of
sacctmgr list assoc.
-- Modify reservation logic so that daily and weekly reservations maintain
the same time when daylight savings time starts or ends in the interim.
-- Edit to make reservations handle updates to associations.
-- Added the derived exit code to the slurmctld job record and the derived
exit code and string to the job record in the SLURM db.
-- Added slurm-sjobexit RPM for SLURM job exit code management tools.
-- Added ability to use sstat/sacct against the batch step.
-- Added OnlyDefaults option to sacctmgr list associations.
-- Modified the fairshare priority formula to F = 2**(-Ue/S)
-- Modify the PMI functions key-pair exchange function to support a 32-bit
counter for larger job sizes. Patch from Hongjia Cao, NUDT.
-- In sched/builtin - Make the estimated job start time logic faster (borrowed
new logic from sched/backfill and added pthread) and more accurate.
-- In select/cons_res fix bug that could result in a job being allocated zero
CPUs on some nodes. Patch from Hongjia Cao, NUDT.
-- Fix bug in sched/backfill that could set expected start time of a job too
far in the future.
Danny Auble
committed
-- Added ability to enforce new limits given to associations/qos on
pending jobs.
-- Increase max message size for the slurmdbd from 1000000 to 16*1024*1024
-- Increase number of active threads in the slurmdbd from 50 to 100
-- Fixed small bug in src/common/slurmdb_defs.c reported by Bjorn-Helge Mevik
-- Fixed sacctmgr's ability to query associations against qos again.
-- Fixed sview show config on non-bluegene systems.
-- Fixed bug in selecting jobs based on sacct -N option
-- Fix bug that prevented job Epilog from running more than once on a node if
a job was requeued and started no job steps.
-- Fixed issue where node index wasn't stored correcting when using DBD.
-- Enable srun's use of the --nodes option with --exclusive (previously the
--nodes option was ignored).
-- Added UsageThreshold and Flags to the QOS object.
-- Patch to improve threadsafeness in the mysql plugins.
-- Add support for fair-share scheduling to be based upon resource use at
the level of bank accounts and ignore use of individual users. Patch by
Par Andersson, National Supercomputer Centre, Sweden.
* Changes in SLURM 2.2.0.pre12
==============================
-- Log if Prolog or Epilog run for longer than MessageTimeout / 2.
-- Log the RPC number associated with messages from slurmctld that timeout.
-- Fix bug in select/cons_res logic when job allocation includes --overcommit
and --ntasks-per-node options and the node has fewer CPUs than the count
specified by --ntasks-per-node.
-- Fix bug in gang scheduling and job preemption logic so that preempted jobs
get resumed properly after a slurmctld hot-start.
-- Fix bug in select/linear handling of gang scheduled jobs that could result
in run_job_cnt underflow error message.
-- Fix bug in gang scheduling logic to properly support partitions added
using the scontrol command.
-- Fix a segmentation fault in sview where the 'excluded_partitions' field
was set to NULL, caused by the absence of ~/.slurm/sviewrc.
-- Rewrote some calls to is_user_any_coord() in src/plugins/accounting_storage
modules to make use of is_user_any_coord()'s return value.
-- Add configure option of --with=dimensions=#.
-- Modify srun ping logic so that srun would only be considered not responsive
if three ping messages were not responded to. Patch from Hongjia Cao (NUDT).
-- Preserve a node's ReasonTime field after scontrol reconfig command. Patch
from Hongjia Cao (NUDT).
-- Added the authority for users with AdminLevel's defined in the SLURM db
(Operators and Admins) and account coordinators to invoke commands that
affect jobs, reservations, nodes, etc.
-- Fix for slurmd restart on completing node with no tasks to get the correct
state, completing. Patch from Hongjia Cao (NUDT).
-- Prevent scontrol setting a node's Reason="". Patch from Hongjia Cao (NUDT).
-- Add new functions hostlist_ranged_string_malloc,
hostlist_ranged_string_xmalloc, hostlist_deranged_string_malloc, and
hostlist_deranged_string_xmalloc which will allocate memory as needed.
-- Make the slurm commands support both the --cluster and --clusters option.
Previously, some commands support one of those options, but not the other.
-- Fix bug when resizing a job that has steps running on some of those nodes.
Avoid killing the job step on remaining nodes. Patch from Rod Schultz
(BULL). Also fix bug related to tracking the CPUs allocated to job steps
on each node after releasing some nodes from the job's allocation.
-- Applied patch from Rod Schultz / Matthieu Hautreux to keep the Node-to-Host
cache from becoming corrupted when a hostname cannot be resolved.
-- Export more symbols in libslurm for job and node state information
translation (numbers to strings). Patch from Hongia Cao, NUDT.
-- Add logic to retry sending RESPONSE_LAUNCH_TASKS messages from slurmd to
srun. Patch from Hongia Cao, NUDT.
-- Modify bit_unfmt_hexmask() and bit_unfmt_binmask() functions to clear the
bitmap input before setting the bits indicated in the input string.
-- Add SchedulerParameters option of bf_window to control how far into the
future that the backfill scheduler will look when considering jobs to start.
The default value is one day. See "man slurm.conf" for details.
-- Fix bug that can result in duplicate job termination records in accounting
for job termination when slurmctld restarts or reconfigures.
-- Modify plugin and library logic as needed to support use of the function
slurm_job_step_stat() from user commands.
-- Fix race condition in which PrologSlurmctld failure could cause slurmctld
to abort.
-- Fix bug preventing users in secondary user groups from being granted access
to partitions configured with AllowGroups.
-- Added support for a default account and wckey per cluster within accounting.
-- Modified select/cons_res plugin so that if MaxMemPerCPU is configured and a
job specifies it's memory requirement, then more CPUs than requested will
automatically be allocated to a job to honor the MaxMemPerCPU parameter.
-- Added the derived_ec (exit_code) member to job_info_t. exit_code captures
the exit code of the job script (or salloc) while derived_ec contains the
highest exit code of all the job steps.
-- Added SLURM_JOB_EXIT_CODE and SLURM_JOB_DERIVED_EC variables to the
EpilogSlurmctld environment
Danny Auble
committed
-- More work done on the accounting_storage/pgsql plugin, still beta.
Patch from Hongjia Cao (NUDT).
-- Major updates to sview from Dan Rusak (Bull), including:
- Persistent option selections for each tab page
- Clean up topology in grids
- Leverage AllowGroups and Hidden options
- Cascade full-info popups for ease of selection
-- Add locks around the MySQL calls for proper operation if the non-thread
safe version of the MySQL library is used.
-- Remove libslurm.a, libpmi.a and libslurmdb.a from SLURM RPM. These static
libraries are not generally usable.
-- Fixed bug in sacctmgr when zeroing raw usage reported by Gerrit Renker.
* Changes in SLURM 2.2.0.pre11
==============================
-- Permit a regular user to change the partition of a pending job.
-- Major re-write of the job_submit/lua plugin to pass pointers to available
partitions and use lua metatables to reference the job and partition fields.
-- Add support for serveral new trigger types: SlurmDBD failure/restart,
Database failure/restart, Slurmctld failure/restart.
-- Add support for SLURM_CLUSTERS environment variable in the sbatch, sinfo,
squeue commands.
-- Modify the sinfo and squeue commands to report state of multiple clusters
if the --clusters option is used.
-- Added printf __attribute__ qualifiers to info, debug, ... to help prevent
bad/incorrect parameters being sent to them. Original patch from
Eygene Ryabinkin (Russian Research Centre).
-- Fix bug in slurmctld job completion logic when nodes allocated to a
completing job are re-booted. Patch from Hongjia Cao (NUDT).
-- In slurmctld's node record data structure, rename "hilbert_integer" to
"node_rank".
-- Add topology/node_rank plugin to sort nodes based upon rank loaded from
BASIL on Cray computers.
-- Fix memory leak in the auth/munge and crypto/munge plugins in the case of
some failure modes.
* Changes in SLURM 2.2.0.pre10
==============================
Danny Auble
committed
-- Fix issue when EnforcePartLimits=yes in slurm.conf all jobs where no nodecnt
was specified the job would be seen to have maxnodes=0 which would not
allow jobs to run.
Danny Auble
committed
-- Fix issue where if not suspending a job the gang scheduler does the correct
kill procedure.
Danny Auble
committed
-- Fixed some issues when dealing with jobs from a 2.1 system so they live
after an upgrade.
-- In srun, log if --cpu_bind options are specified, but not supported by the
current system configuration.
Danny Auble
committed
-- Various Patchs from Hongjia Cao dealing with bugs found in sacctmgr and
the slurmdbd.
-- Fix bug in changing the nodes allocated to a running job and some node
names specified are invalid, avoid invalid memory reference.
-- Fixed filename substitution of %h and %n based on patch from Ralph Bean
-- Added better job sorting logic when preempting jobs with qos.
-- Log the IP address and port number for some communication errors.
-- Fix bug in select/cons_res when --cpus_per_task option is used, could
oversubscribe resources.
-- In srun, do not implicitly set the job's maximum node count based upon a
required hostlist.
-- Avoid running the HealthCheckProgram on non-responding nodes rather than
DOWN nodes.
-- Fix bug in handling of poll() functions on OS X (SLURM was ignoring POLLIN
if POLLHUP flag was set at the same time).
Danny Auble
committed
-- Pulled Cray logic out of common/node_select.c into it's own
select/cray plugin cons_res is the default. To use linear add 'Linear' to
SelectTypeParameters.
-- Fixed bug where resizing jobs didn't correctly set used limits correctly.
-- Change sched/backfill default time interval to 30 seconds and defer attempt
to backfill schedule if slurmctld has more than 5 active RPCs. General
improvements in logic scalability.
-- Add SchedulerParameters option of default_sched_depth=# to control how
many jobs on queue should be tested for attempted scheduling when a job
completes or other routine events. Default value is 100 jobs. The full job
queue is tested on a less frequent basis. This option can dramatically
improve performance on systems with thousands of queued jobs.
-- Gres/gpu now sets the CUDA_VISIBLE_DEVICES environment to control which
GPU devices should be used for each job or job step and CUDA version 3.1+
is used. NOTE: SLURM's generic resource support is still under development.
-- Modify select/cons_res to pack jobs onto allocated nodes differently and
Moe Jette
committed
minimize system fragmentation. For example on nodes with 8 CPUs each, a
job needing 10 CPUs will now ideally be allocated 8 CPUs on one node and
2 CPUs on another node. Previously the job would have ideally been
allocated 5 CPUs on each node, fragmenting the unused resources more.
-- Modified the behavior of update_job() in job_mgr.c to return when the first
error is encountered instead of continuing with more job updates.
-- Removed all references to the following slurm.conf parameters, all of which
have been removed or replaced since version 2.0 or earlier: HashBase,
HeartbeatInterval, JobAcctFrequency, JobAcctLogFile (instead use
AccountingStorageLoc), JobAcctType, KillTree, MaxMemPerTask, and
MpichGmDirectSupport.
-- Fix bug in slurmctld restart logic that improperly reported jobs had
invalid features: "Job 65537 has invalid feature list: fat".
Danny Auble
committed
-- BLUEGENE - Removed thread pool for destroying blocks. It turns out the
memory leak we were concerned about for creating and destroying threads
in a plugin doesn't exist anymore. This increases throughput dramatically,
allowing multiple jobs to start at the same time.
Danny Auble
committed
-- BLUEGENE - Removed thread pool for starting and stopping jobs. For similar
reasons as noted above.
-- BLUEGENE - Handle blocks that never deallocate.
* Changes in SLURM 2.2.0.pre9
=============================
Danny Auble
committed
-- sbatch can now submit jobs to multiple clusters and run on the earliest
available.
-- Fix bug introduced in pre8 that prevented job dependencies and job
triggers from working without the --enable-debug configure option.
-- Replaced slurm_addr with slurm_addr_t
-- Skeleton code added for BlueGeneQ.
-- Jobs can now be submitted to multiple partitions (job queues) and use the
one permitting earliest start time.
Danny Auble
committed
-- Change slurmdb_coord_table back to acct_coord_table to keep consistant
with < 2.1.
-- Introduced locking system similar to that in the slurmctld for the
assoc_mgr.
-- Added ability to change a users name in accounting.
-- Restore squeue support for "%G" format (group id) accidentally removed in
2.2.0.pre7.
-- Added preempt_mode option to QOS.
-- Added a grouping=individual for sreport size reports.
-- Added remove_qos logic to jobs running under a QOS that was removed.
-- scancel now exits with a 1 if any job is non-existant when canceling.
-- Better handling of select plugins that don't exist on various systems for
cross cluster communication. Slurmctld, slurmd, and slurmstepd now only
load the default select plugin as well.
-- Better error handling when loading plugins.
-- Prevent scontrol from aborting if getlogin() returns NULL.
-- Prevent scontrol segfault when there are hidden nodes.
-- Prevent srun segfault after task launch failure.
-- Added job_submit/lua plugin.
-- Fixed sinfo on a bluegene system to print correctly the output for:
Danny Auble
committed
sinfo -e -o "%9P %6m %.4c %.22F %f"
-- Add scontrol commands "hold" and "release" to simplify setting a job's
priority to 0 or 1. Also tests that the job is in pending state.
-- Increase maximum node list size (for incoming RPC) from 1024 bytes to 64k.
-- In the backup slurmctld, purge triggers before recovering trigger state to
avoid duplicate entries.
-- Fix bug in sacct processing of --fields= option.
-- Fix bug in checkpoint/blcr for jobs spanning multiple nodes introduced when
changing some variable names in version 2.2.0.pre5.
-- Removed the vestigal set_max_cluster_usage() function from the Priority
Plugin API.
-- Modify the output of "scontrol show job" for the field ReqS:C:T=. Fields
not specified by the user will be reported as "*" instead of 65534.
-- Added DefaultQOS option for an association.
Danny Auble
committed
-- BLUEGENE - Added -B option to the slurmctld to clear created blocks from
the system on start.
-- BLUEGENE - Added option to scontrol & sview to recreate existing blocks.
Danny Auble
committed
-- Fixed flags for returning messages to use the correct munge key when going
cross-cluster.
Danny Auble
committed
-- BLUEGENE - Added option to scontrol & sview to resume blocks in an error
state instead of just freeing them.
Danny Auble
committed
-- sview patched to allow multiple row selection of jobs, patch from Dan Rusak
-- Lower default slurmctld server thread count from 1024 to 256. Some systems
process threads on a last-in first-out basis and the high thread count was
causing unexpectedly high delays for some RPCs.
-- Added to sacctmgr the ability for admins to reset the raw usage of a user
or account
-- Improved the efficiency of a few lines in sacctmgr
* Changes in SLURM 2.2.0.pre8
=============================
-- Add DebugFlags parameter of "Backfill" for sched/backfill detailed logging.
-- Add DebugFlags parameter of "Gang" for detailed logging of gang scheduling
activities.
-- Add DebugFlags parameter of "Priority" for detailed logging of priority
multifactor activities.
-- Add DebugFlags parameter of "Reservation" for detailed logging of advanced
reservations.
-- Add run time to mail message upon job termination and queue time for mail
message upon job begin.
-- Add email notification option for job requeue.
-- Generate a fatal error if the srun --relative option is used when not
within an existing job allocation.
-- Modify the meaning of InactiveLimit slightly. It will now cancel the job
allocation created using the salloc or srun command if those commands
cease responding for the InactiveLimit regardless of any running job steps.
This parameter will no longer effect jobs spawned using sbatch.
-- Remove AccountingStoragePass and JobCompPass from configuration RPC and
scontrol show config command output. The use of SlurmDBD is still strongly
recommended as SLURM will have limited database functionality or protection
otherwise.
-- Add sbatch options of --export and SBATCH_EXPORT to control which
environment variables (if any) get propagated to the spawned job. This is
particularly important for jobs that are submitted on one cluster and run
on a different cluster.
-- Fix bug in select/linear when used with gang scheduling and there are
preempted jobs at the time slurmctld restarts that can result in over-
subscribing resources.
-- Added keeping track of the qos a job is running with in accounting.
Danny Auble
committed
-- Fix for handling correctly jobs that resize, and also reporting correct
stats on a job after it finishes.
Danny Auble
committed
-- Modify gang scheduler so with SelectTypeParameter=CR_CPUS and task
affinity is enabled, keep track of the individual CPUs allocated to jobs
rather than just the count of CPUs allocated (which could overcommit
specific CPUs for running jobs).
-- Modify select/linear plugin data structures to eliminate underflow errors
for the exclusive_cnt and tot_job_cnt variables (previously happened when
slurmctld reconfigured while the job was in completing state).
-- Change slurmd's working directory (and location of core files) to match
that of the slurmctld daemon: the same directory used for log files,
SlurmdLogFile (if specified with an absolute pathname) otherwise the
directory used to save state, SlurmdSpoolDir.
-- Add sattach support for the --pty option.
-- Modify slurmctld communications logic to accept incoming messages on more
than one port for improved scalability.
-- Add SchedulerParameters option of "defer" to avoid trying to schedule a
job at submission time, but to attempt scheduling many jobs at once for
improved performance under heavy load.
-- Correct logic controlling slurmctld thread limit eliminating check of
RLIMIT_STACK.
-- Make slurmctld's trigger logic more robust in the event that job records
get purged before their trigger can be processed (e.g. MinJobAge=1).
-- Add support for users to hold/release their own jobs (submit the job with
srun/sbatch --hold/-H option or use "scontrol update jobid=# priority=0"
to hold and "scontrol update jobid=# priority=1" to release).
-- Added ability for sacct to query jobs by qos and a range of timelimits.
-- Added ability for sstat to query pids of steps running.
-- Support time specification in UTS format with a prefix of "uts" (e.g.
"sbatch --begin=uts458389988 my.script").
* Changes in SLURM 2.2.0.pre7
=============================
-- Fixed issue with sacctmgr if querying against non-existent cluster it
Danny Auble
committed
works the same way as 2.1.
-- Added infrastructure to support allocation of generic node resources (gres).
-Modified select/linear and select/cons_res plugins to allocate resources
at the level of a job without oversubcription.
-Get sched/backfill operating with gres allocations.
-Get gres configuration changes (reconfiguration) working.
-Have job steps allocate resources.
-Modified job step credential to include the job's and step's gres
allocation details.
-Integrate with HWLOC library to identify GPUs and NICs configured on each
node.
-- SLURM commands (squeue, sinfo, etc...) can now go cross-cluster on like
linux systems. Cross-cluster for bluegene to linux and such should
-- Added the ability to configure PreemptMode on a per-partition basis.
-- Change slurmctld's default thread limit count to 1024, but adjust that down
as needed based upon the process's resource limits.
-- Removed the non-functional "SystemCPU" and "TotalCPU" reporting fields from
sstat and updated man page
-- Correct location of apbasil command on Cray XT systems.
-- Fixed bug in MinCPU and AveCPU calculations in sstat command
-- Send message to srun when the Prolog takes too long (MessageTimeout) to
complete.
-- Change timeout for socket connect() to be half of configured MessageTimeout.
-- Added high-throughput computing web page with configuration guidance.
-- Use more srun sockets to process incoming PMI (MPICH2) connections for
better scalability.
-- Added DebugFlags for the select/bluegene plugin: DEBUG_FLAG_BG_PICK,
DEBUG_FLAG_BG_WIRES, DEBUG_FLAG_BG_ALGO, and DEBUG_FLAG_BG_ALGO_DEEP.
-- Remove vestigial job record field "kill_on_step_done" (internal to the
slurmctld daemon only).
-- For MPICH2 jobs: Clear PMI state between job steps.
* Changes in SLURM 2.2.0.pre6
=============================
-- sview - added ability to see database configuration.
-- sview - added ability to add/remove visible tabs.
-- sview - change way grid highlighting takes place on selected objects.
-- Added infrastructure to support allocation of generic node resources.
-Added node configuration parameter of Gres=.
-Added ability to view/modify a node's gres using scontrol, sinfo and sview.
-Added salloc, sbatch and srun --gres option.
-Added ability to view a job or job step's gres using scontrol, squeue and
sview.
-Added new configuration parameter GresPlugins to define plugins used to
manage generic resources.
-Added DebugFlags option of "gres" for detailed debugging of gres actions.
-- Slurmd modified to log slow slurmstepd startup and note possible file system
problem.
-- sview - There is now a .slurm/sviewrc created when running sview.
Danny Auble
committed
Defaults are put in there as to how sview looks when first launched.
You can set these by Ctrl-S or Options->Set Default Settings.
-- Add scontrol "wait_job <job_id>" option to wait for nodes to boot as needed.
Moe Jette
committed
Useful for batch jobs (in Prolog, PrologSlurmctld or the script) if powering
down idle nodes.
-- Added salloc and sbatch option --wait-all-nodes. If set non-zero, job
initiation will be delayed until all allocated nodes have booted. Salloc
will log the delay with the messages "Waiting for nodes to boot" and "Nodes
Danny Auble
committed
-- The Priority/mulitfactor plugin now takes into consideration size of job
in cpus as well as size in nodes when looking at the job size factor.
Previously only nodes were considered.
Danny Auble
committed
-- When using the SlurmDBD messages waiting to be sent will be combined
and sent in one message.
-- Remove srun's --core option. Move the logic to an optional SPANK plugin
(currently in the contribs directory, but plan to distribute through
http://code.google.com/p/slurm-spank-plugins/).
Danny Auble
committed
-- Patch for adding CR_CORE_DEFAULT_DIST_BLOCK as a select option to layout
jobs using block layout across cores within each node instead of cyclic
which was previously the default.
Danny Auble
committed
-- Accounting - When removing associations if jobs are running, those jobs
must be killed before proceeding. Before the jobs were killed
automatically thus causing user confusion on what is most likely an
admin's mistake.
-- sview - color column keeps reference color when highlighting.
-- Configuration parameter MaxJobCount changed from 16-bit to 32-bit field.
The default MaxJobCount was changed from 5,000 to 10,000.
Danny Auble
committed
-- SLURM commands (squeue, sinfo, etc...) can now go cross-cluster on like
linux systems. Cross-cluster for bluegene to linux and such does not
currently work. You can submit jobs with sbatch. Salloc and srun are not
cross-cluster compatible, and given their nature to talk to actual compute
Danny Auble
committed
nodes these will likely never be.
-- salloc modified to forward SIGTERM to the spawned program.
-- In sched/wiki2 (for Moab support) - Add GRES and WCKEY fields to MODIFYJOBS
and GETJOBS commands. Add GRES field to GETNODES command.
-- In struct job_descriptor and struct job_info: rename min_sockets to
sockets_per_node, min_cores to cores_per_socket, and min_threads to
threads_per_core (the values are not minimum, but represent the target
values).
-- Fixed bug in clearing a partition's DisableRootJobs value reported by
Hongjia Cao.
-- Purge (or ignore) terminated jobs in a more timely fashion based upon the
MinJobAge configuration parameter. Small values for MinJobAge should improve
responsiveness for high job throughput.
* Changes in SLURM 2.2.0.pre5
=============================
-- Modify commands to accept time format with one or two digit hour value
-- Modify time parsing logic to accept "minute", "hour", "day", and "week" in
addition to the currently accepted "minutes", "hours", etc.
-- Add slurmd option of "-C" to print actual hardware configuration and exit.
-- Pass EnforcePartLimits configuration parameter from slurmctld for user
commands to see the correct value instead of always "NO".
-- Modify partition data structures to replace the default_part,
disable_root_jobs, hidden and root_only fields with a single field called
"flags" populated with the flags PART_FLAG_DEFAULT, PART_FLAG_NO_ROOT
PART_FLAG_HIDDEN and/or PART_FLAG_ROOT_ONLY. This is a more flexible
solution besides making for smaller data structures.
-- Add node state flag of JOB_RESIZING. This will only exist when a job's
accounting record is being written immediately before or after it changes
size. This permits job accounting records to be written for a job at each
size.
-- Make calls to jobcomp and accounting_storage plugins before and after a job
changes size (with the job state being JOB_RESIZING). All plugins write a
record for the job at each size with intermediate job states being
-- When changing a job size using scontrol, generate a script that can be
executed by the user to reset SLURM environment variables.
-- Modify select/linear and select/cons_res to use resources released by job
resizing.
-- Added to contribs foundation for Perl extension for slurmdb library.
-- Add new configuration parameter JobSubmitPlugins which provides a mechanism
to set default job parameters or perform other site-configurable actions at
job submit time.
-- Better postgres support for accounting, still beta.
-- Speed up job start when using the slurmdbd.
Danny Auble
committed
-- Forward step failure reason back to slurmd before in some cases it would
just be SLURM_FAILURE returned.
-- Changed squeue to fail when passed invalid -o <output_format> or
-S <sort_list> specifications.
* Changes in SLURM 2.2.0.pre4
=============================
-- Add support for a PropagatePrioProcess configuration parameter value of 2
to restrict spawned task nice values to that of the slurmd daemon plus 1.
This insures that the slurmd daemon always have a higher scheduling
priority than spawned tasks.
-- Add support in slurmctld, slurmd and slurmdbd for option of "-n <value>" to
-- Fixed slurm_load_slurmd_status and slurm_pid2jobid to work correctly when
multiple slurmds are in use.
Danny Auble
committed
-- Altered srun to set max_nodes to min_nodes if not set when doing an
allocation to mimic that which salloc and sbatch do. If running a step if
the max isn't set it remains unset.
-- Applied patch from David Egolf (David.Egolf@Bull.com). Added the ability
to purge/archive accounting data on a day or hour basis, previously
it was only available on a monthly basis.
Moe Jette
committed
-- Add support for maximum node count in job step request.
-- Fix bug in CPU count logic for job step allocation (used count of CPUS per
node rather than CPUs allocated to the job).
-- Add new configuration parameters GroupUpdateForce and GroupUpdateTime.
See "man slurm.conf" for details about how these control when slurmctld
updates its information of which users are in the groups allowed to use
partitions.
Danny Auble
committed
-- Added sacctmgr list events which will list events that have happened on
clusters in accounting.
-- Permit a running job to shrink in size using a command of
"scontrol update JobId=# NumNodes=#" or
"scontrol update JobId=# NodeList=<names>". Subsequent job steps must
explicitly specify an appropriate node count to work properly.
-- Added resize_time field to job record noting the time of the latest job
size change (to be used for accounting purposes).
Danny Auble
committed
-- sview/smap now hides hidden partitions and their jobs by default, with an
option to display them.
* Changes in SLURM 2.2.0.pre3
=============================
-- Refine support for TotalView partial attach. Add parameter to configure
program of "--enable-partial-attach".
-- In select/cons_res, the count of CPUs on required nodes was formerly
ignored in enforcing the maximum CPU limit. Also enforce maximum CPU
limit when the topology/tree plugin is configured (previously ignored).
-- In select/cons_res, allocate cores for a job using a best-fit approach.
-- In select/cons_res, for jobs that can run on a single node, use a best-fit
packing approach.
-- Add support for new partition states of DRAIN and INACTIVE and new partition
option of "Alternate" (alternate partition to use for jobs submitted to
partitions that are currently in a state of DRAIN or INACTIVE).
-- Add group membership cache. This can substantially speed up slurmctld
startup or reconfiguration if many partitions have AllowGroups configured.
-- Added slurmdb api for accessing slurm DB information.
-- In select/linear: Modify data structures for better performance and to
avoid underflow error messages when slurmctld restarts while jobs are
in completing state.
-- Added hash for slurm.conf so when nodes check in to the controller it can
verify the slurm.conf is the same as the one it is running. If not an
error message is displayed. To silence this message add NO_CONF_HASH
to DebugFlags in your slurm.conf.
-- Added error code ESLURM_CIRCULAR_DEPENDENCY and prevent circular job
dependencies (e.g. job 12 dependent upon job 11 AND job 11 is dependent
upon job 12).
-- Add BootTime and SlurmdStartTime to available node information.
-- Fixed moab_2_slurmdb to work correctly under new database schema.
-- Slurmd will drain a compute node when the SlurmdSpoolDir is full.
* Changes in SLURM 2.2.0.pre2
=============================
-- Add support for spank_get_item() to get S_STEP_ALLOC_CORES and
S_STEP_ALLOC_MEM. Support will remain for S_JOB_ALLOC_CORES and
S_JOB_ALLOC_MEM.
-- Kill individual job steps that exceed their memory limit rather than
killing an entire job if one step exceeds its memory limit.
-- Added configuration parameter VSizeFactor to enforce virtual memory limits
for jobs and job steps as a percentage of their real memory allocation.
-- Add scontrol ability to update job step's time limits.
-- Add scontrol ability to update job's NumCPUs count.
-- Add --time-min options to salloc, sbatch and srun. The scontrol command
has been modified to display and modify the new field. sched/backfill
plugin has been changed to alter time limits of jobs with the
--time-min option if doing so permits earlier job initiation.
-- Add support for TotalView symbol MPIR_partial_attach_ok with srun support
to release processes which TotalView does not attach to.
-- Add new option for SelectTypeParameters of CR_ONE_TASK_PER_CORE. This
option will allocate one task per core by default. Without this option,
by default one task will be allocated per thread on nodes with more than
one ThreadsPerCore configured.
-- Avoid accounting separately for a current pid corresponds to a Light Weight
Process (Thread POSIX) appearing in the /proc directory. Only account for
the original process (pid==tgid) to avoid accounting for memory use more
than once.
-- Add proctrack/cgroup plugin which uses Linux control groups (aka cgroup)
to track processes on Linux systems having this feature enabled (kernel
>= 2.6.24).
-- Add logging of license transations including job_id.
-- Add configuration parameters SlurmSchedLogFile and SlurmSchedLogLevel to
support writing scheduling events to a separate log file.
-- Added contribs/web_apps/chart_stats.cgi, a web app that invokes sreport to
retrieve from the accounting storage db a user's request for job usage or
machine utilization statistics and charts the results to a browser.
Danny Auble
committed
-- Massive change to the schema in the storage_accounting/mysql plugin. When
starting the slurmdbd the process of conversion may take a few minutes.
You might also see some errors such as 'error: mysql_query failed: 1206
The total number of locks exceeds the lock table size'. If you get this,
do not worry, it is because your setting of innodb_buffer_pool_size in
your my.cnf file is not set or set too low. A decent value there should
be 64M or higher depending on the system you are running on. See
RELEASE_NOTES for more information. But setting this and then
restarting the mysqld and slurmdbd will put things right. After this
change we have noticed 50-75% increase in performance with sreport and
sacct.
Danny Auble
committed
-- Fix for MaxCPUs to honor partitions of 1 node that have more than the
maxcpus for a job.
-- Add support for "scontrol notify <message>" to work for batch jobs.
-- Added SLURM_VERSION_NUMBER and removed SLURM_API_VERSION from
slurm/slurm.h.
Danny Auble
committed
-- Added support to handle communication with SLURM 2.1 clusters. Job's
should not be lost in the future when upgrading to higher versions of
SLURM.
-- Added withdeleted options for listing clusters, users, and accounts
-- Remove PLPA task affinity functions due to that package being deprecated.
-- Preserve current partition state information and node Feature and Weight
information rather than use contents of slurm.conf file after slurmctld
restart with -R option or SIGHUP. Replace information with contents of
slurm.conf after slurmctld restart without -R or "scontrol reconfigure".
See RELEASE_NOTES file fore more details.
-- Modify SLURM's PMI library (for MPICH2) to properly execute an executable
program stand-alone (single MPI task launched without srun).
-- Made GrpCPUs and MaxCPUs limits work for select/cons_res.
Danny Auble
committed
-- Moved all SQL dependant plugins into a seperate rpm slurm-sql. This
should be needed only where a connection to a database is needed (i.e.
where the slurmdbd is running)
-- Add command line option "no_sys_info" to PAM module to supress system
logging of "access granted for user ...", access denied and other errors
will still be logged.
Danny Auble
committed
-- sinfo -R now has the user and timestamp in separate fields from the reason.
-- Much functionality has been added to account_storage/pgsql. The plugin
is still in a very beta state. It is still highly advised to use the
mysql plugin, but if you feel like living on the edge or just really
like postgres over mysql for some reason here you go. (Work done
primarily by Hongjia Cao, NUDT.)
* Changes in SLURM 2.1.17
=========================
-- Correct format of --begin reported in salloc, sbatch and srun --help
message.
-- Correct logic for regular users to increase nice value of their own jobs.
* Changes in SLURM 2.1.16
=========================
-- Fixed minor warnings from gcc-4.5
-- Fixed initialization of accounting_stroage_enforce in the slurmctld.
-- Fixed bug where if GrpNodes was lowered while pending jobs existed and where
above the limit the slurmctld would seg fault.
-- Fixed minor memory leak when unpack error happens on an
association_shares_object_t.
-- Set Lft and Rgt correctly when adding association. Fix for regression
caused in 2.1.15, cosmetic fix only.
-- Replaced optarg which was undefined in some spots to make sure ENV vars are
set up correctly.
-- When removing an account from a cluster with sacctmgr you no longer get
a list of previously deleted associations.
-- Fix to make jobcomp/(pg/my)sql correctly work when the database name is
different than the default.
* Changes in SLURM 2.1.15
=========================
-- Fix bug in which backup slurmctld can purge job scripts (and kill batch
jobs) when it assumes primary control, particularly when this happens
multiple times in a short time interval.
-- In sched/wiki and sched/wiki2 add IWD (Initial Working Directory) to the
information reported about jobs.
-- Fix bug in calculating a daily or weekly reservation start time when the
reservation is updated. Patch from Per Lundqvist (National Supercomputer
Centre, Linköping University, Sweden).
-- Fix bug in how job step memory limits are calculated when the --relative
option is used.
-- Restore operation of srun -X option to forward SIGINT to spawned tasks
without killing them.
-- Fixed a bug in calculating the root account's raw usage reported by Par
Andersson
-- Fixed a bug in sshare displaying account hierarchy reported by Per
Lundqvist.
-- In select/linear plugin, when a node allocated to a running job is removed
from a partition, only log the event once. Fixes problem reported by Per
Lundqvist.
* Changes in SLURM 2.1.14
=========================
-- Fixed coding mistakes in _slurm_rpc_resv_show() and job_alloc_info() found
while reviewing the code.
-- Fix select/cons_res logic to prevent allocating resources while jobs
previously allocated resources on the node are still completing.
-- Fixed typo in job_mgr.c dealing with qos instead of associations.
-- Make sure associations and qos' are initiated when added.
-- Fixed wrong initialization for wckeys in the association manager.
-- Added wiki.conf configuration parameter of HidePartitionNodes. See
"man wiki.conf" for more information.
-- Add "JobAggregationTime=#" field SchedulerParameter configuration parameter
output.
-- Modify init.d/slurm and slurmdbd scripts to prevent the possible
inadvertent inclusion of "." in LD_LIBRARY_PATH environment variable.
To fail, the script would need to be executed by user root or SlurmUser
without the LD_LIBRARY_PATH environment variable set and there would
have to be a maliciously altered library in the working directory.
Thanks to Raphael Geissert for identifying the problem. This addresses
security vulnerability CVE-2010-3380.
* Changes in SLURM 2.1.13
=========================
-- Fix race condition which can set a node state to IDLE on slurmctld startup
even if it has running jobs.
* Changes in SLURM 2.1.12
=========================
-- Fixes for building on OS X 10.5.
-- Fixed a few '-' without a '\' in front of them in the man pages.
-- Fixed issues in client tools where a requeued job did get displayed
correctly.
-- Update typos in doc/html/accounting.shtml doc/html/resource_limits.shtml
doc/man/man5/slurmdbd.conf.5 and doc/man/man5/slurm.conf.5
-- Fixed a bug in exitcode:signal display in sacct
-- Fix bug when request comes in for consumable resources and the -c option
is used in conjunction with -O
-- Fixed squeue -o "%h" output formatting
-- Change select/linear message "error: job xxx: best_fit topology failure"
to debug type.
-- BLUEGENE - Fix for sinfo -R to group all midplanes together in a single
line for midplanes in an error state instead of 1 line for each midplane.
-- Fix srun to work correctly with --uid when getting an allocation
and creating a step, also fix salloc to assume identity at the correct
time as well.
-- BLUEGENE - Fixed issue with jobs being refused when running dynamic mode
and every job on the system happens to be the same size.
-- Removed bad #define _SLURMD_H from slurmd/get_mach_stat.h. Didn't appear
to cause any problems being there, just incorrect syntax.
-- Validate the job ID when salloc or srun receive an SRUN_JOB_COMPLETE RPC to
avoid killing the wrong job if the original command exits and the port gets
re-used by another command right away.
-- Fix to node in correct state in accounting when updating it to drain from
scontrol/sview.
-- BLUEGENE - Removed incorrect unlocking on error cases when starting jobs.
-- Improve logging of invalid sinfo and squeue print options.
-- BLUEGENE - Added check to libsched_if to allow root to run even outside of
SLURM. This is needed when running certain blocks outside of SLURM in HTC
mode.
* Changes in SLURM 2.1.11-2
===========================
-- BLUEGENE - make it so libsched_if.so is named correctly on 'L' it is
libsched_if64.so and on 'P' it is libsched_if.so
* Changes in SLURM 2.1.11
=========================
-- BLUEGENE - fix sinfo to not get duplicate entries when running command
sinfo -e -o "%9P %6m %.4c %.22F %f"
-- Fix bug that caused segv when deleting a partition with pending jobs.
-- Better error message for when trying to modify an account's name with
sacctmgr.
-- Added back removal of #include "src/common/slurm_xlator.h" from
select/cons_res.
-- Fix incorrect logic in global_accounting in regression tests for
setting QOS.
-- BLUEGENE - Fixed issue where removing a small block in dynamic mode,
and other blocks also in that midplane needed to be removed and were in
and error state. They all weren't removed correctly in accounting.
-- Prevent scontrol segv with "scontrol show node <name>" command with nodes
in a hidden partition.
-- Fixed sizing of popup grids in sview.
-- Fixed sacct when querying against a jobid the start time is not set.
-- Fix configure to get correct version of pkg-config if both 32bit and 64bit
libs are installed.
-- Fix issue with sshare not sorting correctly the tree of associations.
-- Update documentation for sreport.
-- BLUEGENE - fix regression in 2.1.10 on assigning multiple jobs to one block.
-- Minor memory leak fixed when killing job error happens.
-- Fix sacctmgr list assoc when talking to a 2.2 slurmdbd.
* Changes in SLURM 2.1.10
=========================
-- Fix memory leak in sched/builtin plugin.
-- Fixed sbatch to work correctly when no nodes are specified, but
--ntasks-per-node is.
-- Make sure account and wckey for a job are lower case before inserting into
accounting.
-- Added note to squeue documentation about --jobs option displaying jobs
even if they are on hidden partitions.
-- Fix srun to work correctly with --uid when getting an allocation
and creating a step.
-- Fix for when removing a limit from a users association inside the
fairshare tree the parents limit is now inherited automatically in
the slurmctld. Previously the slurmctld would have to be restarted.
This problem only exists when setting a users association limit to -1.
-- Patch from Matthieu Hautreux (CEA) dealing with possible overflows that
could come up with the select/cons_res plugin with uint32_t's being treated
as uint16_t's.
-- Correct logic for creating a reservation with a Duration=Infinite (used to
set reservation end time in the past).
-- Correct logic for creating a reservation that properly handles the OVERLAP
and IGNORE_JOBS flags (flags were ignored under some conditions).
-- Fixed a fair-share calculation bug in the priority/multifactor plugin.
-- Make sure a user entry in the database that was previously deleted is
restored clean when added back, i.e. remove admin privileges previously
given.
-- BLUEGENE - Future start time is set correctly when eligible time for a job
is in the future, but the job can physically run earlier.
-- Updated Documentation for sacctmgr for Wall and CPUMin options stating when
the limit is reached running jobs will be killed.
-- Fix deadlock issue in the slurmctld when lowering limits in accounting to
lower than that of pending jobs.
-- Fix bug in salloc, sbatch and srun that could under some conditions process
the --threads-per-core, --cores-per-socket and --sockets-per-node options
improperly.
-- Fix bug in select/cons_res with memory management plus job preemption with
job removal (e.g. requeue) which under some conditions failed to preempt
jobs.
-- Fix deadlock potential when using qos and associations in the slurmctld.
-- Update documentation to state --ntasks-per-* is for a maximum value
instead of an absolute.
-- Get ReturnToService=2 working for front-end configurations (e.g. Cray or
BlueGene).
-- Do not make a non-responding node available for use after running
"scontrol update nodename=<name> state=resume". Wait for node to respond
before use.
-- Added slurm_xlator.h to jobacct_gather plugins so they resolve symbols
correctly when linking to the slurm api.
-- You can now update a jobs QOS from scontrol. Previously you could only do
this from sview.
-- BLUEGENE - Fixed bug where if running in non-dynamic mode sometimes the
start time returned for a job when using test-only would not be correct.
* Changes in SLURM 2.1.9
========================
-- In select/linear - Fix logic to prevent over-subscribing memory with shared
nodes (Shared=YES or Shared=FORCE).
-- Fix for handling -N and --ntasks-per-node without specifying -n with
salloc and sbatch.
-- Fix jobacct_gather/linux if not polling on tasks to give tasks time to
start before doing initial gather.
-- When changing priority with the multifactor plugin we make sure we update
the last_job_update variable.
-- Fixed sview for gtk < 2.10 to display correct debug level at first.
-- Fixed sview to not select too fast when using a mouse right click.
-- Fixed sacct to display correct timelimits for jobs from accounting.
-- Fixed sacct when running as root by default query all users as documented.
-- In proctrack/linuxproc, skip over files in /proc that are not really user
processes (e.g. "/proc/bus").
-- Fix documentation bug for slurmdbd.conf
-- Fix slurmctld to update qos preempt list without restart.
-- Fix bug in select/cons_res that in some cases would prevent a preempting job
from using of resources already allocated to a preemptable running job.
-- Fix for sreport in interactive mode to honor parsable/2 options.
-- Fixed minor bugs in sacct and sstat commands
-- BLUEGENE - Fixed issue if the slurmd becomes unresponsive and you have
blocks in an error state accounting is correct when the slurmd comes
back up.
-- Corrected documentation for -n option in srun/salloc/sbatch
-- BLUEGENE - when running a willrun test along with preemption the bluegene
plugin now does the correct thing.
-- Fix possible memory corruption issue which can cause slurmctld to abort.
-- BLUEGENE - fixed small memory leak when setting up env.
-- Fixed deadlock if using accounting and cluster changes size in the
database. This can happen if you mistakenly have multiple primary
slurmctld's running for a single cluster, which should rarely if ever
happen.
-- Fixed sacct -c option.
-- Critical bug fix in sched/backfill plugin that caused memory corruption.
* Changes in SLURM 2.1.8
========================
-- Update BUILD_NOTES for AIX and bgp systems on how to get sview to
build correctly.
-- Update man page for scontrol when nodes are in the "MIXED" state.
-- Better error messages for sacctmgr.
-- Fix bug in allocation of CPUs with select/cons_res and --cpus-per-task
option.
-- Fix bug in dependency support for afterok and afternotok options to insure
that the job's exit status gets checked for dependent jobs prior to puring
completed job records.
-- Fix bug in sched/backfill that could set an incorrect expected start time
for a job.
-- BLUEGENE - Fix for systems that have midplanes defined in the database
that don't exist.
-- Accounting, fixed bug where if removing an object a rollback wasn't
possible.
-- Fix possible scontrol stack corruption when listing jobs with very a long
job or working directory name (over 511 characters).
-- Insure that SPANK environment variables set by salloc or sbatch get
propagated to the Prolog on all nodes by setting SLURM_SPANK_* environment
variables for srun's use.
-- In sched/wiki2 - Add support for the MODIFYJOB command to alter a job's
comment field
-- When a cluster first registers with the SlurmDBD only send nodes in an
non-usable state. Before all nodes were sent.
-- Alter sacct to be able to query jobs by association id.
-- Edit documentation for scontrol stating ExitCode as something not alterable.
-- Update documentation about ReturnToService and silently rebooting nodes.
-- When combining --ntasks-per-node and --exclusive in an allocation request
the correct thing, giving the allocation the entire node but only
ntasks-per-node, happens.
-- Fix accounting transaction logs when deleting associations to put the
ids instead of the lfts which could change over time.
-- Fix support for salloc, sbatch and srun's --hint option to avoid allocating
a job more sockets per node or more cores per socket than desired. Also
when --hint=compute_bound or --hint=memory_bound then avoid allocating more
than one task per hyperthread (a change in behavior, but almost certainly
a preferable mode of operation).
* Changes in SLURM 2.1.7
========================
-- Modify srun, salloc and sbatch parsing for the --signal option to accept
either a signal name in addition to the previously supported signal
numbers (e.g. "--signal=USR2@200").
-- BLUEGENE - Fixed sinfo --long --Node output for cpus on a single cnode.
-- In sched/wiki2 - Fix another logic bug in support of Moab being able to
identify preemptable jobs.
-- In sched/wiki2 - For BlueGene systems only: Fix bug preventing Moab from
being able to correctly change the node count of pending jobs.
-- In select/cons_res - Fix bug preventing job preemption with a configuration
of Shared=FORCE:1 and PreemptMode=GANG,SUSPEND.
-- In the TaskProlog, add support for an "unset" option to clear environment
variables for the user application. Also add support for embedded white-
space in the environment variables exported to the user application
(everything after the equal sign to the end of the line is included without
alteration).
-- Do not install /etc/init.d/slurm or /etc/init.d/slurmdbd on AIX systems.
-- BLUEGENE - fixed check for small blocks if a node card of a midplane is
in an error state other jobs can still run on the midplane on other
nodecards.
-- BLUEGENE - Check to make sure job killing is in the active job table in
DB2 when killing the job.
-- Correct logic to support ResvOverRun configuration parameter.
-- Get --acctg-freq option working for srun and salloc commands.
-- Fix sinfo display of drained nodes correctly with the summarize flag.
-- Fix minor memory leaks in slurmd and slurmstepd.
-- Better error messages for failed step launch.
-- Modify srun to insure compatability of the --relative option with the node
count requested.
* Changes in SLURM 2.1.6-2
==========================
-- In sched/wiki2 - Fix logic in support of Moab being able to identify
preemptable jobs.
-- Applied fixes to a debug4 message in priority_multifactor.c sent in by
Per Lundqvist
-- BLUEGENE - Fixed issue where incorrect nodecards could be picked when
looking at combining small blocks to make a larger small block.
* Changes in SLURM 2.1.6
========================
-- For newly submitted jobs, report expected start time in squeue --start as
"N/A" rather than current time.
-- Correct sched/backfill logic so that it runs in a more timely fashion.
-- Fixed issue if running on accounting cache and priority/multifactor to
initialize the root association when the database comes back up.
Moe Jette
committed
-- Emulated BLUEGENE - fixed issue where blocks weren't always created
correctly when loading from state. This does not apply to a real
bluegene system, only emulated.
-- Fixed bug when job is completing and its cpu_cnt would be calculated
incorrectly, possibly resulting in an underflow being logged.
-- Fixed bug where if there are pending jobs in a partition which was
updated to have no nodes in it the slurmctld would dump core.
-- Fixed smap and sview to display partitions with no nodes in them.
-- Improve configure script's logic to detect LUA libraries.
-- Fix bug that could cause slurmctld to abort if select/cons_res is used AND a
job is submitted using the --no-kill option AND one of the job's nodes goes
DOWN AND slurmctld restarts while that job is still running.
-- In jobcomp plugins, job time limit was sometimes recorded improperly if not
set by user (recorded huge number rather than partition's time limit).
* Changes in SLURM 2.1.5
========================
-- BLUEGENE - Fixed display of draining nodes for sinfo -R.
-- Fixes to scontrol and sview when setting a job to an impossible start time.
-- Added -h to srun for help.
-- Fix for sacctmgr man page to remove erroneous 'with' statements.
-- Fix for unpacking jobs with accounting statistics, previously it appears
only steps were unpacked correctly, for the most case sacct would only
display this information making this fix a very minor one.
-- Changed scontrol and sview output for jobs with unknown end times from
'NONE' to 'Unknown'.
-- Fixed mysql plugin to reset classification when adding a
previously deleted cluster.
-- Permit a batch script to reset umask and have that propagate to tasks
spawed by subsequent srun. Previously the umask in effect when sbatch was
executed was propagated to tasks spawed by srun.
-- Modify slurm_job_cpus_allocated_on_node_id() and
slurm_job_cpus_allocated_on_node() functions to not write explanation of
failures to stderr. Only return -1 and set errno.
-- Correction in configurator.html script. Prolog and Epilog were reversed.
-- BLUEGENE - Fixed race condition where if a nodecard has an error on an
un-booted block when a job comes to use it before the state checking
thread notices it which could cause the slurmctld to lock up on a
non-dynamic system.
-- In select/cons_res with FastSchedule=0 and Procs=# defined for the node,
but no specific socket/core/thread count configured, avoid fatal error if
the number of cores on a node is less than the number of Procs configured.
-- Added ability for the perlapi to utilize opaque data types returned from
the C api.
-- BLUEGENE - made the perlapi get correct values for cpus per node,
Previously it would give the number of cpus per cnode instead of midplane.
-- BLEUGENE - Fixed issue where if a block being selected for a job to use
and during the process a hardware failure happens, previously the block
would still be allowed to be used which would fail or requeue the job
depending on the configuration.
-- For SPANK job environment, avoid duplicate "SPANK_" prefix for environment
set by sbatch jobs.
-- Make squeue select jobs on hidden partitions when requesting more than one.
-- Avoid automatically cancelling job steps when all of the tasks on some node
have gracefully terminated.
* Changes in SLURM 2.1.4
========================
-- Fix for purge script in accounting to use correct options.
-- If SelectType=select/linear and SelectTypeParameters=CR_Memory fix bug that
would fail to release memory reserved for a job if "scontrol reconfigure"
is executed while the job is in completing state.
-- Fix bug in handling event trigger for job time limit while job is still
in pending state.
-- Fixed display of Ave/MaxCPU in sacct for jobs. Steps were printed
correctly.
-- When node current features differs from slurm.conf, log the node names
using a hostlist expression rather than listing individual node names.
-- Improve ability of srun to abort job step for some task launch failures.
-- Fix mvapich plugin logic to release the created job allocation on
initialization failure (previously the failures would cancel job step,
but retain job allocation).
-- Fix bug in srun for task count so large that it overflows int data type.
-- Fix important bug in select/cons_res handling of ntasks-per-core parameter
that was uncovered by a bug fixed in v2.1.3. Bug produced fatal error for
slurmctld: "cons_res: cpus computation error".
-- Fix bug in select/cons_res handling of partitions configured with
Shared=YES. Prior logic failed to support running multiple jobs per node.
* Changes in SLURM 2.1.3-2
==========================
-- Modified spec file to obsolete pam_slurm when installing
the slurm-pam_slurm rpm.
* Changes in SLURM 2.1.3-1
==========================
-- BLUEGENE - Fix issues on static/overlap systems where if a midplane
was drained you would not be able to create new blocks on it.
-- In sched/wiki2 (for Moab): Add excluded host list to job information
using new keyword "EXCLUDE_HOSTLIST".
-- Correct slurmd reporting of incorrect socket/core/thread counts.
-- For sched/wiki2 (Moab): Do not extend a job's end time for suspend/resume
or startup delay due to node boot time. A job's end time will always be
its start time plus time limit.
-- Added build-time option (to configure program) of --with-pam_dir to
specify the directory into which PAM modules get installed, although it
should pick the proper directory by default. "make install" and "rpmbuild"
should now put the pam_slurm.so file in the proper directory.
-- Modify PAM module to link against SLURM API shared library and use exported
slurm_hostlist functions.
-- Do not block new jobs with --immediate option while another job is in the
process of being requeued (which can take a long time for some node failure
modes).
-- For topology/tree, log invalid hostnames in a single hostlist expression
rather than one per line.
-- A job step's default time limit will be UNLIMITED rather than partition's
default time limit. The step will automatically be cancelled as part of the
job termination logic when the job's time limit is reached.
-- sacct - fixed bug when checking jobs against a reservation
-- In select/cons_res, fix support for job allocation with --ntasks_per_node
option. Previously could allocate too few CPUs on some nodes.
-- Adjustment made to init message to the slurmdbd to allow backwards
compatibility with future 2.2 release. YOU NEED TO UPGRADE SLURMDBD
BEFORE ANYTHING ELSE.
-- Fix accounting when comment of down/drained node has double quotes in it.
* Changes in SLURM 2.1.2
========================
-- Added nodelist to sview for jobs on non-bluegene systems
-- Correction in value of batch job environment variable SLURM_TASKS_PER_NODE
under some conditions.
-- When a node silently fails which is already drained/down the reason
for draining for the node is not changed.
-- Srun will ignore SLURM_NNODES environment variable and use the count of
currently allocated nodes if that count changes during the job's lifetime
(e.g. job allocation uses the --no-kill option and a node goes DOWN, job
step would previously always fail).
-- Made it so sacctmgr can't add blank user or account. The MySQL plugin
will also reject such requests.
-- Revert libpmi.so version for compatibility with SLURM version 2.0 and
earlier to avoid forcing applications using a specific libpmi.so version to
rebuild unnecessarily (revert from libpmi.so.21.0.0 to libpmi.so.0.0.0).
-- Restore support for a pending job's constraints (required node features)
when slurmctld is restarted (internal structure needed to be rebuilt).
-- Removed checkpoint_blcr.so from the plugin rpm in the slurm.spec since
it is also in the blcr rpm.
-- Fixed issue in sview where you were unable to edit the count
of jobs to share resources.
-- BLUEGENE - Fixed issue where tasks on steps weren't being displayed
correctly with scontrol and sview.
-- BLUEGENE - fixed wiki2 plugin to report correct task count for pending
jobs.
-- BLUEGENE - Added /etc/ld.so.conf.d/slurm.conf to point to the
directory holding libsched_if64.so when building rpms.
-- Adjust get_wckeys call in slurmdbd to allow operators to list wckeys.
========================
Danny Auble
committed
-- Fix for case sensitive databases when a slurmctld has a mixed case
clustername to lower case the string to easy compares.
Danny Auble
committed
-- Fix squeue if job is completing and failed to print remaining
nodes instead of failed message.
-- Fix sview core when searching for partitions by state.
Danny Auble
committed
-- Fixed setting the start time when querying in sacct to the
beginning of the day if not set previously.
-- Defined slurm_free_reservation_info_msg and slurm_free_topo_info_msg
in common/slurm_protocol_defs.h
-- Avoid generating error when a job step includes a memory specification and
memory is not configured as a consumable resource.
-- Patch for small memory leak in src/common/plugstack.c
-- Fix bug in which improperly formed job dependency specification can cause
slurmctld to abort.
-- Fixed issue where slurmctld wouldn't always get a message to send cluster
information when registering for the first time with the slurmdbd.
-- Add slurm_*_trigger.3 man pages for event trigger APIs.
-- Fix bug in job preemption logic that would free allocated memory twice.
-- Fix spelling issues (from Gennaro Oliva)
-- Fix issue when changing parents of an account in accounting all childern
weren't always sent to their respected slurmctlds until a restart.
-- Restore support for srun/salloc/sbatch option --hint=nomultithread to
bind tasks to cores rather than threads (broken in slurm v2.1.0-pre5).
-- Fix issue where a 2.0 sacct could not talk correctly to a 2.1 slurmdbd.
-- BLUEGENE - Fix issue where no partitions have any nodes assigned them to
alert user no blocks can be created.
-- BLUEGENE - Fix smap to put BGP images when using -Dc on a Blue Gene/P
system.
-- Set SLURM_SUBMIT_DIR environment variable for srun and salloc commands to
match behavior of sbatch command.
-- Report WorkDir from "scontrol show job" command for jobs launched using
salloc and srun.
-- Update correctly the wckey when changing it on a pending job.
-- Set wckeyid correctly in accounting when cancelling a pending job.
-- BLUEGENE - critical fix where jobs would be killed incorrectly.
-- BLUEGENE - fix for sview putting multiple ionodes on to nodelists when
viewing the jobs tab.
========================
-- Improve sview layout of blocks in use.
-- A user can now change the dimensions of the grid in sview.
-- BLUEGENE - improved startup speed further for large numbers of defined
blocks
-- Fix to _get_job_min_nodes() in wiki2/get_jobs.c suggested by Michal Novotny
-- BLUEGENE - fixed issues when updating a pending job when a node
count was incorrect for the asked for connection type.
Danny Auble
committed
-- BLUEGENE - fixed issue when combining blocks that are in ready states to
make a larger block from those or make multiple smaller blocks by
splitting the larger block. Previously this would only work with block
in a free state.
Danny Auble
committed
-- Fix bug in wiki(2) plugins where if HostFormat=2 and the task list is
greater than 64 we don't truncate. Previously this would mess up Moab
by sending a truncated task list when doing a get jobs.
-- Added update slurmctld debug level to sview when in admin mode.
-- Added logic to make sure if enforcing a memory limit when using the
jobacct_gather plugin a user can no longer turn off the logic to enforce
the limit.
-- Replaced many calls to getpwuid() with reentrant uid_to_string()
Danny Auble
committed
-- The slurmstepd will now refresh it's log file handle on a reconfig,
previously if a log was rolled any output from the stepd was lost.